COMPONENT TECHNOLOGY LIMITED U.K.DISTRIBUTOR
|
|
- Lillian Franklin
- 5 years ago
- Views:
Transcription
1 COMPONENT TECHNOLOGY LIMITED U.K.DISTRIBUTOR Unit 4 RyeÞ eld Way Silsden West Yorkshire BD20 0EF UK Tel: + 44 (0) Fax: + 44 (0) sales@adcomtec.co.uk Web:
2 Staffa Radial Piston Motors These Staffa Radial Piston Motors are available in two forms, the single displacement range from HMB010 up to HMB400 and the dual displacement range from HMC030 up to HMC400. Consistent controlled acceleration of loads with smooth, steady, low speed operation The only fully hydrostatically balanced design in the industry Less wear and superior starting torque due to minimal metal to metal contact within the motor Torque Ranges Displacements Rated Pressure Speed Range 577 Nm to 25,000 Nm 188 cc to 6,800 cc 250 Bar 1 to 500 rpm High Power HPC Series The enhanced version of the standard C series motor includes special low friction components combined with crankcase ß ushing ß ow to achieve increased shaft power. The range of HP motors extends from the HPC080 of 1600cc/rev to the HPC325 of 5326 cc/rev. There are 5 frame sizes in this product range. Enhanced Power performance Increased Speed Improved starting and running efþ ciency Increased back pressure capability High torques at low speed Smooth running Wide range of displacements to suit speciþ c applications Displacements change with ease when the motor is running Electro-hydraulic or hydro-mechanical control methods available Various mounting options available LARGE PRODUCT STOCK HOLDING
3 Kawasaki K3VL Variable Displacement Pumps High efþ ciency, compact design with through drive capacity, high self priming speeds and with 320 Bar continuous pressure rating it is very robust and reliable. These units come with an extensive range of integral control options enabling exceptional overall speciþ cation and performance. Available in SAE and ISO mounting options Pressure limiter and load sense combination with integral unload and proportional relief remote control. Torque limiter control which can be integrated with any of the above. Displacement sizes Rated Pressure Speed Range 28,45,60,80,112,140 & 200 cc 320 Bar continuous 1,900 to 3,250 rpm Kawasaki K7VG High Pressure Pumps The K7VG series is a newly developed high-pressure swash plate type axial piston pump. This series is especially suitable for heavy duty applications. Reliable High Pressure and Long-life is made possible by utilising an optimised piston/slipper and high load bearings. Low Noise is made possible by suitable valve plate design and rigid pump casing. High EfÞ ciency, High Self priming Capability by the use of a spherical valve plate. Optional Through Drive allows an auxilliary or second pump to be direct mounted proving a compact, low cost solution. Displacement sizes Applicable to Þ re-resistant ß uids. Water Glycol Rated Pressure and Esther based Bio-degradable oil is usable Speed Range with Pressure reservation. 180 & 270, 360 & 540 cc Tandem 350 Bar 1,600 to 3,200 rpm FULL AFTERSALES SUPPORT
4 Kawasaki K8V Closed Loop Pumps The K8V series has been developed as a swash plate and closed circuit type pump based on the proven design of the K3V/K5V Pumps. K8V series is suitable for HST (Hydro Static Transmission), making the most of Kawasaki s advanced high efþ ciency technologies. High efþ ciency and low noise realised by the latest design techniques. Wide range of controls Various valves and charge pump necessary for HST system are incorporated. Type K8V71 * K8V90 * K8V125 Displacement cm Pressure (Bar) Rated 400 Peak 400 Max Speed (min- 1 ) Kawasaki M7V Axial Piston Motor The M7V series motor is Kawasaki s Þ rst high-speed hydraulic motor. It displays impressive smooth operation and high performance across a wide range of speeds from high to low. High speed operation and Smooth starting characteristics Low Speed operation Compact size by swash plate design Type M7V85* M7V112 M7V160* Displacement cm 3 q max q min Pressure (Bar) Max Speed (min- 1 ) Rated 40/400 Max 45/450 at q max at q 1 <0.6 q max APPLICATION ENGINEERING
5 Kawasaki Motors The M2X/M5X series of swash plate type piston motors developed for application to swinging/slewing operations. These motors are complete with a built in mechanical brake, relief valve and make up valve. The MX3 offers a range of Þ xed displacement motors and the M3B offers variable displacement options. Displacements range from 64cm 3 to 800cm 3 Staffa Brakes A full range of Staffa Brakes to suit the Staffa Hydraulic Motor range from HMB010 to HMB400. Ranges include the F030/45, F101, F202 and F402 New more compact design, containing fewer wearing parts, easier to maintain Available as integral brake unit for gearbox units The new Multi-plate brakes F032 and F102 are also available with reduced internal moving parts and compact design. A full range of spares are also available for these brake units and the earlier Staffa Shoe Brake designs. Staffa Gearboxes This range of single reduction Epicyclic Gearboxes extends the continuous Torque capacity of the Staffa motor range up to 104 KNm. This comprehensive range of 6 sizes, is designed on the modular concept, offering over 40 combinations of geared motor transmissions. Additionally these can be combined with a multiplate brake assembly, Þ tted inside the gearbox casing. Complete Transmission full range gives a balanced transmission package for both marine and general industrial drives Flexibility in service modular concept for minimum inconvenience.
6 Eckart Rotary Actuators We offer a wide range of Hydraulic and Pneumatic Eckart Rotary Actuator Units. These units operate around a multiple helical gear design transferring linear motion into rotation. Hydraulic units upto 250 Bar Working Pressure Pneumatic units upon 10 Bar Working Pressure Various mounting options High performance & reliability Range 200 to 100,000 Nm Precision Combined Rotary Linear Units Hydraulic : up to 100 Bar Torque : up to 2,050 Nm Force : 122,000 N Angle of Rotation : 0 to 720 Special applications by customers request High Flexibility ACT High Availability Rotary actuators Linear rotary actuators Hydraulic cylinders Economic Specials efþ cency Robustness Durability A65 A59 Skipton Addingham A629 SILSDEN ILKLEY Utley Riddlesden A650 BINGLEY Advanced Components are the ofþ cial UK distributor for Kawasaki Precision Machinery Ltd Unit 4 RyeÞ eld Way Silsden West Yorkshire BD20 0EF UK Tel: + 44 (0) Fax: + 44 (0) sales@adcomtec.co.uk Web:
S H A R I N G T H E F U T U R E. Designed & produced by Clear Communications HMC Staffa Dual Displacement Radial Piston Motors
S H A R I N G T H E F U T U R E Designed & produced by Clear Communications +44 1752 664262 HMC Staffa Dual Displacement Radial Piston Motors KAWASAKI STAFFA HYDRAULIC MOTORS Since 1955, when the first
More information19561Q7:19561Q 4/19/10 9:45 AM Page 2 Product LineCatalog
Product LineCatalog Kawasaki History Kawasaki Heavy Industries, Ltd. has been providing technological innovations to the world for more than 100 years. Operating on a global scale, Kawasaki designs, manufactures
More informationISO Certificate N 12-E TIC. ISO 9001 Certificate N 12-Q TIC
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Certificate N 12-Q-0200545-TIC ISO 14001 Certificate N 12-E-0200545-TIC Via M. L. King,
More informationPISTON MOTORS FOR CLOSED LOOP SYSTEMS types HMF/A/V/R-02
1-control optional swashing to 0 cc /rev 2-swash plate hydrostatic bearing 3-piston-slipper assembly 21 swash angle 4-housing monoshell for high rigidity 5-valve plate housing highly integrated 6-control
More informationPOWER AT WORK AROUND THE WORLD
POWER AT WORK AROUND THE WORLD KAWASAKI... A CORPORATE TIMELINE 2006 Kawasaki Precision Machinery (China) begins production of hydraulic pumps at a new plant in Suzhon. 2005 New steering gear factory is
More informationR 4350L R 2500L R 2050L R 3100L. model
radial piston motors fixed displacement, high torque, low speed 200L 450L 740L 1000L 1350L displacement cm 3 188 442 740 983 1.344 1.639 2.050 2.470 3.080 4.310 5.310 6.800 6.800 11.600 rated pressure
More informationDisplacement. (cc/rev) Tap Water Sea Water MC MV Example.
J anus Motors - Axial Piston Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced materials, high velocity and loaded sliding surfaces can operate
More informationVariable Displacement Open Loop Circuit Axial Piston Pumps. V Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
More informationNB: Models, codes and specifications may be subject to change without notice. SECTION C PISTON PUMPS & MOTORS PAGE DESCRIPTION
NB: Models, codes and specifications may be subject to change without notice. SECTION C PISTON PUMPS & MOTORS PAGE DESCRIPTION PAGE CASAPPA PISTON PUMPS - PLATA SERIES PLATA LVP30...C 2 PLATA LVP48...C
More informationDisplacement. (cc/rev) Tap Water Sea Water PC PV
J anus Pumps - Axial Piston Totally oil free, clean and completely safe for people, processes and products. As a result of employing advanced materials, high velocity and loaded sliding surfaces can operate
More informationRotary Actuators. The World of Rotary Actuators. A world of experience TEST AND MOTION SIMULATION
Rotary Actuators The World of Rotary Actuators Servotest produces two types of Rotary Actuators; Dual Vane, and Torque rotary actuators. By virtue of their design, both types of actuators, when used continuously,
More informationThe Water Hydraulics Co. Ltd.
Body text 3/2 Valve Spring to Open P V03.16 Our Janus axial piston motors are totally oil free, clean and completely safe to use. As a result of employing advanced materials, high velocity and loaded sliding
More informationCreate More Value. Excellent Performance and High Efficiency. HP Series Piston Pump HM Series Motor HENGLI HYDRAULIC. Efficient - Quality - Reliable
HENGLI HYDRAULIC Excellent Performance and High Efficiency Create More Value HP Series Piston Pump HM Series Motor Efficient - Quality - Reliable www.henglihydraulic.com Efficiency and Reliability Create
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V 15 A 1 R B S - A 1 D X A 11 Customers demand Pump Series V Links Type (only V 15-18): none - Standard A - SAE A 2 bolts Ma. Displacement (cm 3 /n): 15, 18, 23, 25,
More informationVariable Displacement Plug-In Motor A6VE
Electric Drives and Controls Hydraulics Linear Motion and Assembly echnologies Pneumatics Service Variable Displacement Plug-In Motor A6VE RE 91 606/06.05 1/16 Replaces: 05.99 echnical data sheet Series
More informationE Range of Electro - Hydraulic Linear and Rotary Actuators. Technical Specification.
E Range of Electro - Hydraulic Linear and Rotary Actuators Technical Specification www.advanced-actuators.com Basic Design Concept Please note this brochure is purely an overview of our product range.
More informationOverview of Hydraulics Range
Overview of Hydraulics Range Edition July 2005 Jahns-Regulatoren GmbH D 63069 Offenbach Sprendlinger Landstraße 150 Telefon +49 (0)69 848477-0 D 63009 Offenbach Postbox 10 09 52 Telefax +49 (0)69 84847725
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 852 / 0815 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationNew Generation Hydraulics. Series 02
New Generation Hydraulics Series 02 New Generation Series 02 Objectives Linde engineers set the target to design a new range of axial piston pumps and motors to carry Linde Hydraulics well into the next
More informationanus Motors - Axial Piston FM V 02/12
anus Motors - Axial Piston Motors - Axial Piston Our anus Axial Piston Motors are totally oil free, clean and completely safe to use. As a result of employing advanced materials, high velocity and loaded
More informationVARIABLE PUMPS FOR CLOSED LOOP OPERATION type HV-02
Design characteristics 1-control device modular design, precise and load-independent 2-swash plate hydrostatic bearing 3-piston-slipper assembly 21 swash angle 4-housing monoshell for high rigidity 5-valve
More informationTXV series. pumps with control. variable displacement piston pumps. TXV - Presentation ADVANTAGES
TXV - Presentation pumps with control variable displacement piston pumps ADVANTAGES Load Sensing. They self regulate to give ust the ow re uired for each movement. truck hydraulics market, TXV pumps are
More informationGP & GH Range. Pneumatic and Hydraulic Actuators for Quarter-Turn Valves. Established Leaders in Actuation Technology
GP & GH Range Pneumatic and Hydraulic Actuators for Quarter-Turn Valves Established Leaders in Actuation Technology Rotork Actuators Quality Controlled Rotork is a global leader in valve actuation technology.
More informationHpv 02 Variable Pumps For Closed Loop Operation
HPV 02 VARIABLE PUMPS FOR CLOSED LOOP OPERATION PDF - Are you looking for hpv 02 variable pumps for closed loop operation Books? Now, you will be happy that at this time hpv 02 variable pumps for closed
More information4000 Series TRS1 Spark Ignited Gas Engine rpm
Developed from a proven engine range that offers superior performance and reliability, the 4008-30TRS is designed to meet the future demands of the power generation industry for clean, efficient gas fuelled
More informationPrecision Machinery Company. Fixed Displacement Radial Piston Staffa Motor. HMB Series
Precision Machinery Company Fixed Displacement Radial Piston Staffa Motor HMB Series CONTENTS Specifications and Features 2 1. Ordering Code 1-1. Model Coding 3 1-2. Shaft Options 4 1-3. Main Port Connection
More informationHPC. Dual Displacement Staffa Radial Piston Motors HT 18 / C / 150 / 1007 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationVariable Displacement Open Loop Circuit Axial Piston Pumps AR Series
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 59 415 711 Fax: +39 59 415 729 / 59 415 73 INTERNET: http://www.hansatmp.it E-MAIL:
More informationQuality Products for Mechanical & Fluid Power. double stage pumps with special integrated valves HIGH-LOW 1HL MULTIPLE PUMPS 1PHL 2HL
09 Quality Products for Mechanical & Fluid Power 09 double stage pumps with special integrated valves 1HL 1PHL HIGH-LOW MULTIPLE PUMPS 2HL an excellence in engineering comprehensive range of components
More informationTest Which component has the highest Energy Density? A. Accumulator. B. Battery. C. Capacitor. D. Spring.
Test 1 1. Which statement is True? A. Pneumatic systems are more suitable than hydraulic systems to drive powerful machines. B. Mechanical systems transfer energy for longer distances than hydraulic systems.
More informationDrilling Rig LB LB Courtesy of Crane.Market
Drilling Rig LB 36-41 EN LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationHydraulic Pump and Track Motor for Hydrostatic Transmission
KYB TECHNICAL REVIEW No. 55 OCT. 2017 Product Introduction Hydraulic Pump and Track Motor for Hydrostatic Transmission INADA Takanori, MIURA Takuya, MATSUZAKA Keita 1 Introduction 2 Hydraulic Pumps There
More informationDrilling Rig LB LB
Drilling Rig LB 28-32 EN LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationFixed Displacement Bent Axis Axial Piston Motors TMB 700
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001:2015-14001:2015 ISO 9001:2015 Certificate N 12-Q-0200545-TIC ISO 14001:2015 Certificate N 12-E-0200545-TIC
More informationDJ100G. Performance Reliability Simplicity
DJ100G Performance Reliability Simplicity Performance Reliability Simplicity DOEN DJ100G The DJ100G The Doen DJ100G waterjet is the only model within Doen WaterJets entire range with an integrated gearbox.
More informationRadial piston motor for heavy duty wheel drives MCR-W
Radial piston motor for heavy duty wheel drives MCR-W RE 15200 Edition: 09.2015 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationHydraulic piston PA PAC PAD. Series
Hydraulic piston pumps PA PAC PAD Series Contents Design of.... 1 Range and characteristics... 2 Characteristics and dimensions... 3 Performance.... 4-5 Accessories.... 6 Shaft sealing... 7 New models
More informationUŽSISAKYKITE internetu telefonu el. paštu
Features Axial piston pump MA10VO in swashplate design is used in open loop circuits. Flow is proportional to drive speed and displacement. By adjusting the position of the swashplate it is possible to
More informationPumps. Pumps GoTo Europe
Pumps GoTo Europe 7 Pumps Axial piston pumps Axial piston pumps in swash plate and bent axis design are intended for the medium and high pressure range. Variations in the designs, in the performance ranges
More information4000 Series TAG3A Diesel Engine ElectropaK rpm
The Perkins 4000 Series is a family of 6, 8, 12 and 16 cylinder diesel engines, designed to address today s uncompromising demands within the power generation industry with particular aim at the standby
More informationHy-Trans Product Guide
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationTMF 600 ( cm³/rev.)
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More information4000 Series 4012TESI Spark Ignited Gas Engine rpm
Designed in advance of today s uncompromising demands within the gas power generation industry, the Perkins 4000 Series family of 6, 8, 12 and 16 cylinder spark ignition gas engines offers superior performance,
More informationTravel Drives by Liebherr. Series-production Gearboxes
Travel Drives by Liebherr Series-production Gearboxes Travel drives by Liebherr For about 40 years, Liebherr has been developing, designing and producing high-performance, versatile travel drives (FAT)
More informationMOTOR SCM ISO
MOTOR SCM 012-130 ISO SCM 012-130 ISO is a range of robust axial piston motors especially suitable for mobile hydraulics. SCM 012-130 ISO is of the bent-axis type with spherical pistons. The design results
More informationvariable displacement DELTA SAE Serie m i
variable displacement pumps DELTA SAE Serie m i Contents xxx Range and characteristics... 1 Dimensions... 2 Performance.... 5 Control devices.... 4 to 8 Under development Delta pump with constant torque
More informationSCM DIN. Other advantages:
SCM 012-130 DIN SCM 012-130 DIN is a series of axial piston motors particularly suitable for mobile hydraulics. SCM 012130 DIN is of the bent-axis type with spherical pistons. Other advantages: The design
More informationHydraulic Components and Systems for Industrial Vehicles
http://www.khi.co.jp/kpm/ Hydraulic Components and Systems for Industrial Vehicles PRECISION MACHINERY COMPANY Tokyo Head Office 1-14-5 Kaigan, Minato-ku, Tokyo 105-8315, Japan Phone +81-3-3435-6862 Fax.
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 114 / 0814 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Certified Company ISO 9001-14001 ISO 9001 Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationTUTORIAL QUESTIONS FOR THE INDUSTRIAL HYDRAULICS COURSE TEP 4205
TUTORIAL QUESTIONS FOR THE INDUSTRIAL HYDRAULICS COURSE TEP 4205 The book for the course is Principles of Hydraulic System Design, by Peter J Chapple. Published by Coxmoor Publishing Co., UK. Available
More informationV Series AXIAL PISTON PUMP ORDER CODE
V Series AXIAL PISTON PUMP ORDER CODE V A 1 R B S - A D X A 1 Customers demand Pump Series V Links Type (only V -18): none - Standard A - SAE A bolts Ma. (cm 3 /n):, 18, 3,, 38, 4,, 7 Pump Control Type
More informationUCC Series Co-Axial Drive Pneuma-Hydraulic
UCC Series Co-Axial Drive Pneuma-Hydraulic 40mm - 200mm bore sizes Features Co-Axial Drives (UCC) consist of two integral elements; a pneumatic drive unit to provide power and an integrated, closed circuit
More informationVickers. Vane Pumps. Double Thru-drive Vane Pumps. High speed, high pressure VQT Series for mobile equipment. Released 7/93
Vickers Vane Pumps Double Thru-drive Vane Pumps High speed, high pressure VQT Series for mobile equipment Released 7/93 612 Introduction Double VQT high performance pumps are fixed displacement units that
More informationVariable displacement axial piston pumps,
Variable displacement axial piston pumps, Edition: 04/04.2000 Replaces: 04/10.99 DISPLACEMENTS From To PRESSURE Max. continuous Max. intermittent Max. peak 29 cm 3 /rev 73 cm 3 /rev 280 bar 315 bar 350
More informationRadial Piston Motor (Multi-Stroke) MCR3
Electric Drives and Controls Hydraulics inear Motion and ssembly Technologies Pneumatics Service Radial Piston Motor (Multi-Stroke) MCR3 RE 15205/06.09 1/18 Replaces: 02.98 Data sheet Series 3X Size 160
More informationAnodised aluminium construction for anti-corrosion and superior wear performance on internal surfaces
Since the mid-sixties the Norbro name has been recognised as the leading quarter turn actuator for industry. As proof of this, Norbro pneumatic actuators can be found in a range of applications as diverse
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 851 / 0813 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES THE PRODUCTION LINE OF HANSA-TMP Variable Displacement Closed Loop System CONTENTS General Information... Order Code... Manual Control
More informationOff-Highway Drive and Motion Technologies Deck Cranes. Brevini motion systems from Dana for deck crane applications
Off-Highway Drive and Motion Technologies Deck Cranes Brevini motion systems from Dana for deck crane applications Dana Your Single Source for Motion Systems to Support Deck Cranes A Trusted Partner PROVEN
More informationPrecision Machinery Company. 4-Speed Radial Piston Staffa Motor HPC400
Precision Machinery Company 4-Speed Radial Piston Staffa Motor HPC400 CONTENTS Specifications and Features 2 1. Ordering Code 3 2. Technical Information 2-1. Performance Data 4-5 2-2. Volumetric Efficiency
More informationRadial piston motor for track drives MCR-T
Radial piston motor for track drives MCR-T RE 15221 Edition: 03.2017 Replaces 07.2015 Frame size MCR5, MCR6, MCR10 Displacement 620cc to 1340cc Differential pressure up to 400 bar Torque output up to 8530
More informationDrilling Rig LB enus LB
Drilling Rig LB 36-41 enus LB 25.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationBOLTIGHT Ltd Hydraulic Bolt Tensioning
BOLTIGHT Ltd Hydraulic Bolt Tensioning The Company Location Walsall UK All tooling is designed and manufactured in the UK Design and manufacture hydraulic bolt tensioning equipment Innovation. Market leading
More informationDrilling Rig LB LB
Drilling Rig LB 2-23 EN LB 22.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Auxiliary winch Radius adjustment
More informationGeared Piston Air Motors
Geared Piston Air Motors GEARED PISTON AIR MOTORS The latest technology in air motors Armak has been continually developing over the past 7 years a contact free rotary piston design of geared piston motor,
More informationRadial piston motor for wheel drives MCR-F
Radial piston motor for wheel drives MCR-F RE 15198 Edition: 02.2017 Replaces 07.2015 Frame size MCR3, MCR5, MCR10, MCR15 (for frame size 20 see MCR20-C) Displacement 160 cc to 2150 cc Differential pressure
More informationADVANCED HYDRAULIC TECHNOLOGIES ENGINEERED TO MOVE
ENGINEERED TO MOVE 1860 ESTABLISHED 1913 HAMWORTHY ENGINEERING ESTABLISHED ADVANCED HYDRAULIC TECHNOLOGIES Outstanding Performance on a Global Scale 1928 EG BISHOP ESTABLISHED 1959 POWAUTO FORMED 1993
More informationAXIAL PISTON MOTORS MF S E R I E S 2 0 C L O S E D C I R C U I T
AXIAL PISTON MOTORS MF GENERAL DESCRIPTION Axial piston fixed displacement motors, Series 20, are of swash plate construction with preset displacement, and are intendent for closed circuit operation. The
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HM(HD)B 270 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3
More informationDrilling Rig LB enus LB
Drilling Rig LB 28-32 enus LB 24.5 Concept and characteristics Kelly rope Leader top for Kelly rope Kelly Leader top for auxiliary rope Rotary Inclination device Casing driver Crowd winch Radius adjustment
More informationModular. Precise. Robust. AGE-S-XYZ Compensation Unit
Modular. Precise. Robust. AGE-S-XYZ Compensation Unit Compensation unit compensating in XY- and Z-direction. Field of Application Palletizing, joining, and assembly of workpieces Advantages Your benefit
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM Pneumatic Gripper-Swivel System Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 325 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More informationSeries P2/P3 Variable Volume Piston Pumps
Variable Volume Piston Pumps A Bulletin HY13-2656-B1/US A3 Introduction General information The newly developed variable displacement piston pumps from Parker Hannifin, designated P2 and P3, are mainly
More informationGear Pumps / Motors. Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs
Gear Pumps / Motors Series PGP / PGM Fixed Displacement Pumps, Cast-Iron and Aluminium Designs Table of contents Heavy-duty Pumps and Motors Series PGP, PGM Contents Page Series 500 Aluminium Table of
More informationKawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
More informationCONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS
CONTINENTAL HYDRAULICS LPV SERIES AXIAL PISTON PUMPS 5505 WEST 123RD STREET SAVAGE, MN 55378-1299 / PH: 952.895.6400 / WWW.CONTINENTALHYDRAULICS.COM LPV PUMPS FEATURES AND BENEFITS The LPV line of Variable
More informationDrilling Rig LB enus LB
Drilling Rig LB 44-51 enus LB 26.5 Concept and characteristics Leader top for Kelly rope (drilling axis - 4.6 ft) Leader top for auxiliary rope Kelly rope Kelly Inclination device Crowd winch Rotary (drilling
More informationRadial piston motor for compact drives MCR-C
Radial piston motor for compact drives MCR-C RE 15197 Edition: 12.2013 Frame size MCR20 Displacement 1750 cc to 3000 cc Differential pressure up to 450 bar Torque output up to 19099 Nm Speed up to 125
More information4000 Series TRG3 Diesel Engine ElectropaK rpm
The Perkins 4000 Series family of 6, 8, 12 and 16 cylinder diesel engines was designed in advance of today s uncompromising demands within the power generation industry and includes superior performance
More informationThe New Generation ISO Cylinders for a Dynamic Future
Electric Drives Linear Motion and and Controls Hydraulics Assembly Technologies Pneumatics Service The New Generation ISO Cylinders for a Dynamic Future Rexroth s new generation of ISO pneumatic cylinders
More informationAxial piston variable pump (A)A4VSO
Axial piston variable pump (A)A4VSO RA 92050-A/06.09 1/64 Replaces: 09.97 Data sheet Series 10, 11 and 30 Size 40...1000 Nominal pressure 5100 psi (350 bar) Peak pressure 5800 psi (400 bar) Open circuit
More information2PS Pumps have the following advantages ;
2PS Bent Axis Piston Pump - ISO 2PS Pumps have the following advantages ; Compact esign, Economical Conception, High Power ensity, High Overall Efficiency, High Rotating Speeds, High Output Pressure, From
More informationTruck Hydraulics. Series F1, F2, T1 Fixed Displacement Pumps
Series F1, F2, T1 Fixed Displacement Pumps aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Contents Hydraulic Pumps,
More information2PBA Pumps have the following advantages ;
2PBA Bent Axis Piston Pump 2PBA Pumps have the following advantages ; Compact Design, Economical Conception, High Power Density, High Overall Efficiency, High Rotating Speeds, High Output Pressure, 35
More informationMarine Engineering: WCB15 Control Block for Mooring, Anchor and Combined Windlass. Lightweight, compact, robust, reliable
Marine Engineering: WCB15 Control Block for Mooring, Anchor and Combined Windlass Lightweight, compact, robust, reliable Proven Technology with Up-to-Date Benefits Nothing is so good that it cannot be
More information50 YEARS OF EXPERIENCE AND RELIABILITY ESSENTIAL
TRUCK MIXER ESSENTIAL 50 YEARS OF EXPERIENCE AND RELIABILITY Over half a century of experience to prove the reliability of Dieci concrete mixers. The proven design of the spiral blades enables a homogeneous
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 403 / 1110 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
More informationGoTo Europe Focused Delivery Program. Product overview Industrial and Mobile Hydraulics
GoTo Europe Focused Delivery Program Product overview Industrial and Mobile Hydraulics 2 GoTo Europe You have hardly any time to complete your order before your delivery arrives Nowadays, every day counts
More informationSCM M2. Other advantages:
Sunfab s SCM 025-108 M2 is a range of robust axial piston motors with cartridge flange especially suitable for winch-, slewing-, wheel- and track drives. SCM 025-108 M2 is of the bent-axis type with spherical
More informationAdvanced Tunnel Technology. Components for Tunnelling Machines
Advanced Tunnel Technology Components for Tunnelling Machines A strong Partner for Tunnelling Applications 2 Liebherr is one of the world s leading manufacturers of components for construction machinery,
More informationNew Generation Hydraulics. Series 02
New Generation Hydraulics Series 02 New Generation Series 02 Objectives Linde engineers set the target to design a new range of axial piston pumps and motors to carry Linde Hydraulics well into the next
More informationLECTURE-23: Basic concept of Hydro-Static Transmission (HST) Systems
MODULE-6 : HYDROSTATIC TRANSMISSION SYSTEMS LECTURE-23: Basic concept of Hydro-Static Transmission (HST) Systems 1. INTRODUCTION The need for large power transmissions in tight space and their control
More informationTMF 500. Fixed Displacement Axial Piston Motor for Open and Closed Loop System MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES MANUFACTURING THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 /
More informationTPV 1000 (Ex 6-18) Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 109 / 1008 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationLecture 6. Systems review exercise To be posted this weekend Due next Friday (3/6)
150 Systems review exercise To be posted this weekend Due next Friday (3/6) Lecture 6 Coming week: Lab 13: Hydraulic Power Steering Lab 14: Integrated Lab (Hydraulic test bench) Topics today: Pumps and
More informationTPV Variable Displacement Closed Loop System Axial Piston Pump HY-TRANS THE PRODUCTION LINE OF HANSA-TMP HT 16 / M / 501 / 1009 / E
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES HY-TRANS THE PRODUCTION LINE OF HANSA-TMP Via M. L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415
More informationxxx displacement pumps TXV for trucks
Variable xxx xxx displacement pumps TXV for trucks 1 sommaire why use a variable displacement pump?... 3 your hydraulic equipment.................. 4 load-sensing.... 5 variable displacement... 6 TXV 40
More informationRadial piston motor for frame integrated drives MCR-A
Radial piston motor for frame integrated drives MCR-A RE 15195 Edition: 12.2013 Frame size MCR3, MCR5, MCR10 Displacement 160 cc to 1340 cc Differential pressure up to 450 bar Torque output up to 8530
More informationCourtesy of Machine.Market
TRUC K MIX ER ESSENTIAL 50 YEARS OF EXPERIENCE AND RELIABILITY Over half a century of experience to prove the reliability of Dieci concrete mixers. The proven design of the spiral blades enables a homogeneous
More information1100 Series. Marine Propulsion Engine M250C and M300C. Powered by Your Needs
1100 Series Marine Propulsion Engine M250C and M300C These are the latest addition to the common platform concept of 1100 Series diesel engines. Assembled on a new high technology production line, these
More information