Agenda / ESPS Electrical Safety Program Solutions INC.
|
|
- Anabel Lawrence
- 5 years ago
- Views:
Transcription
1 PEM Partners in Training Asset Management & Reliability Risk Assessment in the new CSA Z462 Electrical Power Distribution Reliability & Safety, a Valuable Balance Terry Becker, P.Eng., NFPA CESCP Owner, President ESPS Electrical Safety Program Solutions INC. CSA Z462 First Past Vice-Chair, Voting Member, Working Group 8 Annexes Leader, CSA Z463 Associate Member, NFPA 70E Annexes Task Group, IEEE 1584 Voting Member Agenda Change! Overview. CSA Z462 Workplace electrical safety & CSA Z463 Guideline on maintenance of electrical systems. Why do we need electrical equipment maintenance to improve? CSA Z462 Risk Assessment, likelihood. CSA Z463 and electrical safety. 1
2 Agenda Arc flash and electrical power distribution equipment maintenance. Asset reliability and safety. The Future Change Change is fear Change is necessary Change is overwhelming Change is good Change is hard Change is inevitable We must commit to change Without change we cannot improve 2
3 Overview CSA Z462 Workplace electrical safety Standard, and the new CSA Z463 Guideline on maintenance of electrical systems, lend themselves to Asset Management & Reliability. CSA Z462, 3 rd Edition will be published in January of 2015 and will embed Risk Assessment into electrical hazard management. Overview If we have safety, we will have reliability, they go hand in hand!! Inherent to Risk Assessment, likelihood is probability. The new CSA Z463 Guideline will identify that with effective maintenance management of electrical power distribution equipment we can improve reliability, reduce the risk of arcing faults and arc flash events and we can reduce the incident energy released if an arc flash does occur. 3
4 CSA Z462 Workplace electrical safety Standard, 2 nd Edition and rd Edition Risk assessment embedded in 3 rd Edition, formal analysis of probability of an arcing fault and arc flash. Equipment condition a key factor. CSA Z463 Guideline on maintenance of electrical systems, January 2014 New, just published. Canadian grass roots document. Focus on reliability, equipment damage, and safety (e.g. arc flash incident energy). Reviewed other Standards, NETA, NFPA 70B. Will be similar in framework to NFPA 70B. Stresses need for Electrical Equipment Maintenance Program. 4
5 CSA Z463 Guideline on maintenance of electrical systems, January 2014 Condition of electrical power distribution has direct impact on probability of arcing fault and arc flash incident energy. When electrical equipment maintenance is completed the workers executing the work task must complete hazard assessment. CSA Z462, 3 rd Edition will require an Electrical Hazard Risk Assessment related to the work task. CSA Z462 and now with CSA Z463, we need to balance requirements CSA Z462 in 2 nd Edition, 3 rd Edition January CSA Z463 published, January
6 Why do we we need electrical equipment maintenance to improve? Does this equipment need maintenance? Would the breaker on the left actually work? Would it fail, causing an arc flash? Why do we we need electrical equipment maintenance to improve? Should this MCC be energized? 6
7 Why do we we need electrical equipment maintenance to improve? Safe installations? Why do we we need electrical equipment maintenance to improve? Is this equipment suitably maintained and stored?!!! 7
8 Why do we we need electrical equipment maintenance to improve? Do we manage abnormal conditions? Why do we we need electrical equipment maintenance to improve? Portable electrical equipment, extension cords, GFCIs and space in front of electrical distribution equipment? 8
9 Why do we we need electrical equipment maintenance to improve? The visible benefit of maintenance. CSA Z462 Workplace electrical safety, 3 rd Edition 2015 Risk Assessment, likelihood equipment condition Electrical hazard risk assessment now required. Revised Hazard/risk category Table, now call Arc Flash Hazard Identification. New CSA Z462 Table places focus on energized electrical power distribution equipment, normal and abnormal conditions. Worker must complete condition based assessment. 9
10 CSA Z462 Workplace electrical safety, 3 rd Edition 2015 Risk Assessment, likelihood equipment condition CSA Z462 Workplace electrical safety, 3 rd Editon 2015 Risk Assessment, likelihood equipment condition 10
11 CSA Z462 Workplace electrical safety, 3 rd Editon 2015 Risk Assessment, likelihood equipment condition CSA Z462 Workplace electrical safety, 3 rd Editon 2015 Risk Assessment, likelihood equipment condition Probability in the Electrical Risk Assessment Matrix, most significant impact will be the condition of the energized power distribution equipment. 11
12 CSA Z463 Guideline on maintenance of electrical systems Electrical Safety 1 st Edition January Focuses on Electrical Equipment Maintenance Management system requirements and specific maintenance practices. Specific emphasis on impact to arcing fault and arc flash incident energy. Will lead to a change in electrical equipment maintenance practices. CSA Z463 Guideline on maintenance of electrical systems Electrical Safety Clauses and
13 CSA Z463 Guideline on maintenance of electrical systems Electrical Safety x CSA Z463 Guideline on maintenance of electrical systems Electrical Safety x 13
14 CSA Z463 Guideline on maintenance of electrical systems Electrical Safety x Arc flash and electrical power distribution equipment maintenance Key is protective device must operate to Time Current Curve Characteristics. Circuit breakers may open slower without adequate maintenance and arc flash incident energy increases. 14
15 Asset Reliability & Safety x The Future Safety will be the priority for electrical power system design. Safety will be the priority when creating an Electrical Equipment Maintenance Program. Safety will be the priority when prioritizing electrical power distribution equipment maintenance. Safety will influence the budget for electrical power distribution equipment maintenance. 15
16 Questions? Thanks for your time!! Any questions? Terry Becker, P.Eng., NFPA CESCP
Electrical Safety CSA Z462 & NB Regulations
Electrical Safety CSA Z462 & NB Regulations WorkSafeNB s 2014 Health and Safety Conference Daniel Roberts Senior Manager, Electrical Safety Consulting at Schneider Electric Vice-chair CSA Z462 daniel.roberts@schneider-electric.com
More informationZero Energy Verification An Alternative Approach. Timothy Snow CESCP Electrical Safety Officer
Zero Energy Verification An Alternative Approach Timothy Snow CESCP Electrical Safety Officer Hierarchy of Risk Control Methods In Order from Safest to Least Safe Elimination Substitution Minimizes Human
More informationEnergized Electrical Work
Manitoba STANDARD PROCEDURE INSTRUCTION Title Energized Electrical Work Department Supersedes SPI Dated N/A SPI 32-4 Effective Date MAR 30, 2012 Energized Electrical Work SPI 32-4 Page 1 of 9 STANDARD
More informationDesign Considerations to Enhance Safety and Reliability for Service Entrance Switchboards
Design Considerations to Enhance Safety and Reliability for Service Entrance Switchboards Robert P. Hansen, P.E., PhD GE Specification Engineer Introduction Switchboards are a widely used type of equipment
More informationFuture Proof Your Arc Flash Assessment
Future Proof Your Arc Flash Assessment 2017 ENERGY CONNECTIONS CONFERENCE TRADE SHOW Presented by: Keith Mullen, P.E. November 9, 2017 Agenda > Utility requirements > Study objectives > Applicable standards
More informationArc flash solutions catalogue Australia. Safety solutions - Protecting employees and the enterprise
Arc flash solutions catalogue Australia Safety solutions - Protecting employees and the enterprise The risk of an arc flash event is real An arc flash hazard is a proven significant and dangerous threat
More informationArc flash hazard mitigation
Low Voltage Products Arc flash hazard mitigation Each year more than 2,000 people are treated in burn centers with severe arc flash injuries. ABB designs and manufactures products and solutions to provide
More informationOntario Operations MAINTENANCE STANDARD PROCEDURE. Table of Contents. Electrical Electrical Department Energized Electrical Work Procedure
MAINTENANCE STANDARD PROCEDURE Ontario Operations TITLE Department Energized Work Procedure VALE # MPROC-50007 DATED 2018-05-04 PAGE Page 1 of 17 REV. 4 Table of Contents 1.0 PURPOSE... 2 2.0 APPLICATION...
More informationOSHA Update. Electric Power Generation, Transmission and Distribution Standard (Part 1910 & 1926)
OSHA Update Electric Power Generation, Transmission and Distribution Standard (Part 1910 & 1926) 5/14/2014 Significant Changes to the Standards General Training Host Employer & Contractor Responsibilities
More informationElectrical Safety and Overcurrent Protection
Electrical Safety and Overcurrent Protection Dave Vallier DSE Bussmann division Contact info: Phone: 586-201-1348 Email: Davemvallier@eaton.com Agenda 1. Electrical hazards overview 2. The role of the
More informationJanuary 30, Ms. Safety Director Sample Medical Corp. PO Box X Somewhere, CT. Re: NFPA 70E Hazard Assessment. Date of Visit.
3018 Eastpoint Parkway Louisville, KY 40223 (502) 716-7073 January 30, 2006 Ms. Safety Director Sample Medical Corp. PO Box X Somewhere, CT Re: NFPA 70E Hazard Assessment Date of Visit January 24, 2006
More informationHigh Voltage Electrical Maintenance Training
High Voltage Electrical Maintenance Training Contact us Today for a FREE quotation to deliver this course at your company?s location. https://www.electricityforum.com/onsite-training-rfq High Voltage Electrical
More informationElectrical Safety in the Workplace
Electrical Safety in the Workplace Increasing Electrical Safety in the Workplace through Purchasing and Procurement Robert Mitchell, Safety and Technical Safety Advisor Safety Risk, Policy and Innovation
More informationA REPORT TO THE BOARD OF COMMISSIONERS OF PUBLIC UTILITIES. Electrical. Mechanical. Civil. Protection & Control. Transmission & Distribution
A REPORT TO THE BOARD OF COMMISSIONERS OF PUBLIC UTILITIES Electrical Q^sss^ - Mechanical Civil SIONATURI Zo \r or o', Protection & Control Transmission & Distribution Telecontrol System Planning ARC FLASH
More informationCMMI Opens the Gate: The Practical Relationship between CMMI and Stage- Gate Decision Models
NDIA CMMI Technology Conference & User Group Denver, CO CMMI Opens the Gate: The Practical Relationship between CMMI and Stage- Gate Decision Models ABB USCRC - 1 Agenda ABB Overview Stage-Gate Process
More informationPOTENTIAL HEALTH & SAFETY HAZARDS
Number: OH&S 18.11.1 Revision Date: 09/15/2014 TRU Electrical Safety 1. PURPOSE 1.1. The purpose of these guidelines is to provide the framework for controlling the risks associated with electricity to
More informationAssets Installation, operation and maintenance of Street Lighting Assets
Agenda 9:00 AM ADMINISTRATIVE ITEMS Chair of Working Group 9:30 AM ONGOING ISSUES Present and examine ongoing issues associated with Street Lighting Assets Installation, operation and maintenance of Street
More informationELECTRICAL SAFETY A Program Development Guideline
ELECTRICAL SAFETY A Program Development Guideline EDITION» 1 REVISED» August 29, 2018 RELEASE DATE» June 1, 2014 Setting the standard in oil gas safety Energy Safety Canada» Electrical Safety: A Program
More informationAging Systems Workshop Fuel Tank Safety- FINAL RULE
Aging Systems Workshop Fuel Tank Safety- FINAL RULE November 8, 2001 Mike Dostert Transport Airplane Directorate Federal Aviation Administration Phone: 425-227-2132, E-Mail: mike.dostert dostert@faa.gov
More informationUnderstanding BS 1363 Amendment No.4
Intertek Hilton House, Corporation Street, Rugby, Warwickshire, CV21 2DN UK info.uk@intertek.com 01788 578435 www.intertek.com Introduction A new Amendment applying to several parts of the BS 1363 standard
More informationReducing. with Current. arc flash note 2. points of interest. Why Use Current Limiting Fuses. By mike lang, Principal field engineer
Reducing Arc Energies with Current Limiting Fuses arc flash note 2 By mike lang, Principal field engineer Why Use Current Limiting Fuses Current limiting fuses can reduce both the magnitude and duration
More informationNot all Low Voltage Switchgear is created equal
Not all Low Voltage Switchgear is created equal White Paper The must-have solution for power distribution systems Introduction Reliability and safety are the two most important criteria in the proper functioning
More informationShort Circuit/Coordination & Arc Flash Study Specifications
Delphi Short Circuit/Coordination & Arc Flash Study Specifications April 28, 2005 Short Circuit/Coordination & Arc Flash Specification Table of Contents I. General Overview 3 II. Engineering Firm Requirements..
More informationStationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems
Stationary Battery Safety An Overview of the Process of Verifying the Safety of Battery Systems Laurie Florence Principal Engineer Batteries, Fuel Cells & Capacitors Laurie.b.florence@us.ul.com 1-847-664-3782
More informationIntegrating Roles Within Electric Utilities to Achieve Arc Flash Safety. MIPSYCON Presenters Neil Stiller & Bob Cooke
Integrating Roles Within Electric Utilities to Achieve Arc Flash Safety MIPSYCON - 2018 Presenters Neil Stiller & Bob Cooke Presenters Neil Stiller, Sr. Electrical Engineer, RPU 30 years utility experience,
More informationIllinois State University. Electrical Safety Procedure
Illinois State University Electrical Safety Procedure Illinois State University Facilities Management Revision Date: May 2014 Illinois State University Facilities Management Electrical Safety Procedure
More informationSession Four Applying functional safety to machine interlock guards
Session Four Applying functional safety to machine interlock guards Craig Imrie Technology Specialist: Safety, NHP Electrical Engineering Products Abstract With the recent Australian adoption of functional
More information6/4/2017. Advances in technology to address safety. Thomas A. Domitrovich, P.E., LEED AP VP, Technical Sales Eaton
Advances in technology to address safety Thomas A. Domitrovich, P.E., LEED AP VP, Technical Sales Eaton 1 Advances in technology could mean use existing technology & back to basics Advances in safety are
More informationAppendix C. Interval Every 2 Year. Functional Test Weekly Monthly Quarterly. Semi. Every 3. Engineering Studies
Engineering Studies Coordination Study Every 5 years and in conjunction with electrical system modifications. Short Circuit Study NETA MTS 6.2 Every 5 years and in conjunction with electrical system modifications.
More informationTable of Contents. Why An Occupational Health and Safety Program Demonstrating Commitment to Occupational Health and Safety... 1.
Table of Contents Foreword... i 1. Introduction Why An Occupational Health and Safety Program... 1.1 Demonstrating Commitment to Occupational Health and Safety... 1.4 Appendix I: District Commitment to
More informationACHIEVING MAXIMUM BENEFITS WITH A FUSE PROTECTED MOTOR CONTROL CENTER
ACHIEVING MAXIMUM BENEFITS WITH A FUSE PROTECTED MOTOR CONTROL CENTER SYSTEM PROTECTION NOTE 2 BY MIKE LANG, PRINCIPAL FIELD ENGINEER INTRODUCTION Increasing concern for arc flash safety has grown to include
More informationSelective Coordination
Circuit Breaker Curves The following curve illustrates a typical thermal magnetic molded case circuit breaker curve with an overload region and an instantaneous trip region (two instantaneous trip settings
More informationLarge Electric Motor Reliability: What Did the Studies Really Say? Howard W Penrose, Ph.D., CMRP President, MotorDoc LLC
Large Electric Motor Reliability: What Did the Studies Really Say? Howard W Penrose, Ph.D., CMRP President, MotorDoc LLC One of the most frequently quoted studies related to electric motor reliability
More informationHealth Based Asset Management. rjd
Health Based Asset Management 1 Health Care Proactive and Reactive Approaches Physical Routine Screenings Symptoms Targeted Diagnostics Emergency Targeted Diagnostics 2 What is the health of the assets?
More informationBP OIL -- TOLEDO REFINERY
BP OIL -- TOLEDO REFINERY Document Type: Procedure Effective Date: August 31, 2017 Owner: Dane P. Clark Refinery Wide Electrical Distribution System Switching and Isolation Auth. By: Rick J. Chmelovski
More informationStandards Update Notice (SUN) Issued: June 6, 2017
Standard Information Standard Number: UL 153 Standard Name: Portable Electric Luminaires Standard Edition and Issue Date: 13 th Edition Dated March 3, 2014 Date of Revision: January 20, 2017 Date of Previous
More informationARC FLASH MANAGEMENT REVIEW. October 2017
ARC FLASH MANAGEMENT REVIEW October 2017 PURPOSE: The issue of Arc Flash Exposure has been knocking around for the past couple of months but unsure if we all understand the issue with this item and how
More informationNFPA 70E Standard for Electrical Safety Requirements for Employee Workplaces. Table Hazard Risk Category Classification
Table 3-3.9.1 Hazard Risk Classification Table 3-3.9.1 Hazard Risk Classification Panelboards rated 240 V and below Notes 1 and 3 - - - Circuit breaker (CB) or fused switch operation with covers on 0 N
More informationArc Fault Circuit Breakers Implementation
Arc Fault Circuit Breakers Implementation Presented by: Chuck Huber ATSRAC January 12, 2005 1 Electrical Wiring R&D Approach HAZARD PREVENTION AGING AIRCRAFT ELECTRI CAL SYSTEMS RISK MANAGEMENT RESEARCH
More informationStatic Electricity Hazards and Control
Static Electricity Hazards and Control Dirk Smith, President Who is and why am I here? IGT has developed a suite of products to eliminate static inside and outside PE pipe. Because we are called in when
More informationNot all Low Voltage Switchgear is created equal
White Paper Not all Low Voltage Switchgear is created equal The must-have solution for power distribution systems Prepared by: Tom Hawkins, Consulting Product Engineer Rahul Rajvanshi, Senior Product Engineer
More informationLow and medium voltage service. Power Care Customer Support Agreements
Low and medium voltage service Power Care Customer Support Agreements Power Care Power Care is the best, most convenient and guaranteed way of ensuring electrification system availability and reliability.
More informationMAINTENANCE AND TESTING OF PORTABLE ELECTRICAL EQUIPMENT, RCDS AND TOOLS CS-OHS-33
CS ENERGY OPERATIONS PROCEDURE FOR MAINTENANCE AND TESTING OF PORTABLE ELECTRICAL EQUIPMENT, RCDS AND TOOLS CS-OHS-33 Responsible Officer: Electrical Services Engineering Manager Responsible Manager: Group
More informationAGREEMENT TECHNICAL CO-OPERATION BETWEEN ISO AND CEN. (Vienna Agreement)
AGREEMENT ON TECHNICAL CO-OPERATION BETWEEN ISO AND CEN (Vienna Agreement) ISO CEN INTERNATIONAL ORGANIZATION FOR STANDARDIZATION (ISO) EUROPEAN COMMITTEE FOR STANDARDIZATION (CEN) AGREEMENT ON TECHNICAL
More informationUnderstanding Arc Flash Hazards. White Paper
White Paper By: Kevin J. Lippert Eaton Electrical 170 Industry Drive Pittsburgh, PA 15275 Donald M. Colaberardino Eaton Electrical 170 Industry Drive Pittsburgh, PA 15275 Clive W. Kimblin Eaton Electrical
More informationMark Lyvers LLC / Cooper Bussmann Arc Flash Script Script to accompany PowerPoint on New 2002 NEC Arc Flash Hazard Marking Requirement
Mark Lyvers LLC / Cooper Bussmann Arc Flash Script Script to accompany PowerPoint on 110.16 New 2002 NEC Arc Flash Hazard Marking Requirement Slide 1 Suggestion on How to Use Download both the Mark Lyvers
More informationWhat is electricity? A form of energy that is carried through wires and is used to operate machines, lights, etc. PPT-SM-ES
Electrical Safety What is electricity? A form of energy that is carried through wires and is used to operate machines, lights, etc. PPT-SM-ES 2015 2 There are two forms of electricity Static electricity
More informationNFPA 70E Electrical Safety in the Work Place. R. Casey 2/1/05
NFPA 70E Electrical Safety in the Work Place R. Casey 2/1/05 The Other Electrical Hazard Arc flash: high-intensity intensity flash (eye damage) and superheated ball of gas (skin burns and melting)created
More informationADVISE DESIGN IMPLEMENT FOR ELECTROTECHNICAL EXCELLENCE
ADVISE DESIGN FOR ELECTROTECHNICAL EXCELLENCE IMPLEMENT ADVISE DESIGN FOR ELECTROTECHNICAL EXCELLENCE Gemitech was founded in 1990 and, in just a few short years, grew to be recognized as medium and IMPLEMENT
More informationElectrical Safety Program
Electrical Safety Program Medford Area Public School District 124 West State St School District: Medford, WI 54451 715 748 4620 Review Date(s): January 2018 Program Dave Makovsky Coordinator: Purpose and
More informationGE Arc Vault TM Protection System. By Mark Clapper GE Specification Engineer. Introduction. What Variables Contribute To An Arcing fault?
By Mark Clapper GE Specification Engineer Introduction To address the increasing concerns and standards around arcing faults, GE challenged our Global Research Center to develop a new, active method of
More informationInternational Crane Stakeholder Assembly. - Guidance - Lifting of Persons with Mobile Cranes
ICSA N003 International Crane Stakeholder Assembly - Guidance - Lifting of Persons with Mobile Cranes Members are: Association of Equipment Manufacturers [AEM] The Crane Industry Council of Australia [CICA]
More informationLadder Use in Construction Guideline
Ladder Use in Construction Guideline Forward This guideline has been prepared to assist workplace parties in understanding their obligations under the Occupational Health and Safety Act (OHSA) and its
More informationOptimizing Emergency Power Systems for Health Care Applications
2018 Annual Conference Optimizing Emergency Power Systems for Health Care Applications aka: Using the latest code changes to improve system reliability and maybe even save some $$$... Overview Michigan
More informationRecharge Kick-off Meeting Recharge Activity Review Process for
Recharge Kick-off Meeting Debra Fry Executive Director, Operating Budget and Recharge Review Gabriella Hato Manager, Recharge Review Sarah Hislen Analyst, Recharge Review Charet Wynn Analyst, Recharge
More informationSection 5 - Operations and Maintenance Program
Section 5 - Operations and Maintenance Program A. Introduction The intent of this section of the SSMP is to describe the current operation of the City s wastewater collection system. There are five areas
More informationElectrical safety and reliability: Selective coordination. Protect with selective coordination
Electrical safety and reliability: Selective coordination Protect with selective coordination Safe, reliable and cost-effective power distribution Commercial, healthcare and industrial facilities require
More informationISO 3934 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 3934 Second edition 2002-09-01 Rubber, vulcanized and thermoplastic Preformed gaskets used in buildings Classification, specifications and test methods Caoutchouc vulcanisé et
More informationElectrical Safety. Recognizing & Controlling Hazards
Electrical Safety Recognizing & Controlling Hazards Introduction Healthcare facilities, including hospitals, physician offices, laboratoratories, dental offices and beyond are vulnerable to a variety of
More informationSpecification made simple for selective coordination in a compact size
Quik-Spec family of circuit protection solutions BUSSMANN Specification made simple for selective coordination in a compact size SERIES The Quik-Spec Coordination Panelboard (QSCP) simplifies selective
More informationSTATISTICS ELECTRICAL INCIDENTS IN ALBERTA. January 1 to December 31, 2012
Safety Services 16 th floor, Commerce Place Tel: 1-866-421-6929 10155 102 nd Street Fax: 780-427-8686 Edmonton, Alberta Canada T5J 4L4 STATISTICS ELECTRICAL INCIDENTS IN ALBERTA January 1 to December 31,
More informationElement C8.3 Installation, Use and Inspection of Electrical Systems
.3 Installation, Use and Inspection of Electrical Systems Duty Holders Electricity at Work Regs 1989 EWR Employers and Self Employed Comply with regs as far as they are under their control Managers of
More informationSWITCHGEAR OPERATING PERSONNEL SAFETY UPGRADE SOLUTIONS FOR AGED INSTALLED BASE
SWITCHGEAR OPERATING PERSONNEL SAFETY UPGRADE SOLUTIONS FOR AGED INSTALLED BASE Carlo GEMME Paola BASSI Giorgio MAGNO ABB - Italy ABB - Italy ABB - Italy carlo.gemme@it.abb.com paola.bassi@it.abb.com giorgio.magno@it.abb.com
More informationBearing Maintenance and the right tools
Bearing Maintenance and the right tools SKF Maintenance Products by Julien Meunier and Jens Kammann, support from Alain Noordover, 11 th October 2017 Agenda I. Introduction a) Maintenance Strategies b)
More informationHazards SAFETY CORNER. of Establishing an. Work Condition
Hazards of Establishing an Electrically Safe Work Condition Written By Tony Demaria & Dean Naylor, Tony Demaria Electric, Mose Ramieh, III, Power Generation & Testing When working around electrical equipment,
More informationUnrestricted. S.Mukhopadhyay
Unrestricted S.Mukhopadhyay 10.09.15 Electrical safety A report says that every year 5500 Indians die due to electric shock and 800 due to electric fire. 12% work place death due to electrocution ELECTRICAL
More informationIAE-101: Electrical Fundamentals for Non-Electrical Personnel
IAE-101: Electrical Fundamentals for Non-Electrical Personnel Abstract Today s world of rapidly evolving technology poses a wealth of challenges just to remain competitive in the marketplace. Everyone
More informationGuidelines for Modernizing Existing Electrical Switchgear in LV and MV Networks
Guidelines for Modernizing Existing Electrical Switchgear in LV and MV Networks by Georges Barbarin Executive summary Aging electrical switchgear infrastructure is a threat to the reliability of power
More informationNew 2002 NEC. Arc Flash Hazard Marking Requirement Cooper Bussmann, Inc.
110.16 New 2002 NEC Arc Flash Hazard Marking Requirement 2001 Cooper Bussmann, Inc. 110.16 Flash Protection. Switchboards, panelboards, industrial control panels, and motor control centers in other than
More informationNON-FATAL ELECTRICAL INJURIES AT WORK
NON-FATAL ELECTRICAL INJURIES AT WORK Richard Campbell May 2018 Copyright 2018 National Fire Protection Association (NFPA) CONTENTS Findings and Trends 1 Key Takeaways 2 Background on Data Sources and
More informationIEEE Insulated Conductors Committee. Subcommittee B, Cable Accessories
IEEE Insulated Conductors Committee Spring 2011, St. Petersburg, FL Subcommittee B, Cable Accessories Presentation by: Thomas C. Champion History of IEEE 592 First Edition, 1977 IEEE Standard for Exposed
More informationOntario ENGINEERING STANDARD SPECIFICATION 1.0 PURPOSE 2.0 OVERHEAD CRANES
1/5 1.0 PURPOSE This specification describes the minimum requirements for all activities involving hoisting, moving or transporting cargo using equipment such as mobile cranes, hoisting equipment in underground
More informationElectrical Safety For Everyone. Leader s Guide
4609 Electrical Safety For Everyone Leader s Guide ELECTRICAL SAFETY FOR EVERYONE This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION:
More informationEU Work priorities for for UNECE activities. 1. Working Group on Automated and connected vehicles (GRVA)
Transmitted by the representative of the European Union Informal document WP.29-177-18 177 th WP.29, 12-15 March 2019 Agenda item 2.2 EU Work priorities for 2019-2021 for UNECE activities 1. Working Group
More informationLine Gard. Underwriters Laboratories (UL) Applicable Code Notation
Underwriters Laboratories (UL) UL 50E Enclosures for Electrical Equipment, Environmental Considerations 1.1 This standard applies to enclosures for electrical equipment intended to be installed and used
More information2. Panelboards shall have new or updated paper directories printed from the master Excel spreadsheet inserted in the door
2013 Edition, Published February 28, 2013; Division Revision Date: February 28, 2013 Please add a section for identification. Incorporate the following requirements in your standards. These requirements
More informationUtilities (Technical Regulation) (Electricity Transmission Supply Code) Approval 2016 (No 1)*
Australian Capital Territory Utilities (Technical Regulation) (Electricity Transmission Supply Code) Approval 2016 (No 1)* Disallowable instrument DI2016 189 made under the Utilities Technical Regulation
More informationOccupational Driving Consider the Risks. Sandra Wilson, OSACH
Occupational Driving Consider the Risks Sandra Wilson, OSACH Session Outline Who is driving for work purposes? What are the risks factors? How can I minimize these risks? 2 What do you think? True or false:
More informationWelcome to the MOL Blitz webinar Locking & Tagging in Mine Hoisting Plants
Welcome to the MOL Blitz webinar Locking & Tagging in Mine Hoisting Plants Thank you for joining us! We will be getting started at 10:00 a.m. EST To access the audio portion of this webinar, please phone:
More informationPresented to the IAPMO Standards Review Committee on December 9, 2013
Summary of Substantive Changes between the 2010 edition including Updates No. 1 and No. 2 dated September 2010 and August 2011 and the 2013 edition of CSA C22.2 No. 14 Industrial control equipment Presented
More informationSTATISTICS ELECTRICAL INCIDENTS IN ALBERTA. January 1 to December 31, 2013
Safety Services 16 th floor, Commerce Place Tel: 1-866-421-6929 10155 102 nd Street Fax: 780-427-8686 Edmonton, Alberta Canada T5J 4L4 STATISTICS ELECTRICAL INCIDENTS IN ALBERTA January 1 to December 31,
More informationETAP Implementation of Mersen s Medium Voltage Controllable Fuse to Mitigate Arc Flash Incident Energy
ETAP Implementation of Mersen s Medium Voltage Controllable Fuse to Mitigate Arc Flash Incident Energy ETAP 17 Goodyear, Suite 100 Irvine, CA 92618 White Paper No.001.14-2016 Albert Marroquin, PE Member
More informationCan Electric Vehicle Supply Equipment (EVSE) Be Cord-and-Plug Connected? Contents FIGURE 1.
Can Electric Vehicle Supply Equipment (EVSE) Be Cord-and-Plug Connected? Position Paper PPX612051A Jason Nitzberg, Electric Vehicle Infrastructure Expert March 2011, Version 2 DRAFT Contents Executive
More information2014 NEC Changes (Homestudy)
2014 NEC Changes (Homestudy) Idaho Electrical License This course will review the most important National Electrical Code changes from the 2014 NEC. Changes in Articles 100 - Chapter 9 will be covered.
More informationGuideline for Parallel Grid Exit Point Connection 28/10/2010
Guideline for Parallel Grid Exit Point Connection 28/10/2010 Guideline for Parallel Grid Exit Point Connection Page 2 of 11 TABLE OF CONTENTS 1 PURPOSE... 3 1.1 Pupose of the document... 3 2 BACKGROUND
More informationAlternator protection, part 1: Understanding code requirements
Power topic #6002 Part 1 of 3 Technical information from Cummins Power Generation Alternator protection, part 1: Understanding code requirements > White paper By Gary Olson, Technical Counsel This paper
More informationThe Electrical Arc Flash Hazard
The Electrical Arc Flash Hazard UK Cross Sector Research Project. 21 st May 20 th July 2008. Conducted by TAS Engineering Consultants Ltd TAS House 37 39 Norton Road Stockton on Tees. TS18 2BU www.tas.co.uk
More informationLESSONS LEARNED FORSMARK EVENT Presented To IEEEE
LESSONS LEARNED FORSMARK EVENT Presented To IEEEE Thomas Koshy Member of the Task Group on Forsmark Chief of Mechanical & Electrical Engineering Office of Research, USNRC Thomas.Koshy@nrc.gov 1 Agenda
More informationECET 211 Electric Machines & Controls Lecture 1-3 (Part 2) Electrical Safety in the Workplace Electrical Safety in the Workplace
ECET 211 Electric Machines & Controls Lecture 1-3 (Part 2) Electrical Safety in the Workplace Text Book: Electric Motors and Control Systems, by Frank D. Petruzella, published by McGraw Hill, 2015. Other
More informationMajor changes within the New 18 th Edition Wiring Regulations announced by The IET
Major changes within the New 18 th Edition Wiring Regulations announced by The IET BS 7671:2018 Requirements for Electrical Installations will be issued on 2 nd July 2018 and is intended to come into effect
More informationThe Smart Grid: Re-powering America George W. Arnold National Coordinator for Smart Grid Interoperability NIST Gaithersburg, MD April 28, 2010
The Smart Grid: Re-powering America George W. Arnold National Coordinator for Smart Grid Interoperability NIST Gaithersburg, MD April 28, 2010 2 U.S. Electric Grid One of the largest, most complex infrastructures
More informationBussmann series Quik-Spec Coordination Panelboard
Quik-Spec electrical gear 12 Contents Bussmann series Quik-Spec Coordination Panelboard Section page Description Quik-Spec Coordination Panelboards Up to 400 A 2 600 to 1200 A 3 Quik-Spec elevator disconnects
More informationBP-Husky Refinery Toledo, OH
BP-Husky Refinery Toledo, OH Document Type: Procedure Refinery Wide Procedure No.: SAF 095 Effective Date: 2/25/16 Owner: D. Clark Working on or near Energized Electrical Equipment Rev. No.: 6 Auth. By:
More informationConsiderations in Greasing Electric Motor Anti-Friction Bearings
Considerations in Greasing Electric Motor Anti-Friction Bearings Howard W Penrose, Ph.D. VP, Electrical Reliability Programs T-Solutions, Inc. Introduction One of the most important components of any electro-mechanical
More informationibusway for Data Center
ibusway for Data Center PBPQOD Plug-In Units with 15 60 A Circuit Breakers for Use On Busway Straight Sections Class 5600 Installation S1B99523 06/2012 Hazard Categories and Special Symbols Read these
More informationIndustrial IT Solutions for the Networked Economy
Industrial IT Solutions for the Networked Economy Jouko Karvinen Executive Vice President ABB Automation Technology Products Zurich, Switzerland 1 Copyright 2000 ABB Ltd 2 Copyright 2000 ABB Ltd What Does
More informationNATIONAL TRANSPORTATION SAFETY BOARD Public Meeting of February 9, 2016 (Information subject to editing)
NATIONAL TRANSPORTATION SAFETY BOARD Public Meeting of February 9, 2016 (Information subject to editing) Commercial Truck Collision with Stopped Vehicle on Interstate 88, Naperville, Illinois January 27,
More informationDo pre-use inspections matter? By Gavin Hutchinson, RTITB, Auditor and Examiner. +44 (0)
Do pre-use inspections matter? By Gavin Hutchinson, RTITB, Auditor and Examiner solutions@rtitb.co.uk +44 (0) 1952 520212 www.rtitb.co.uk How often do we see things like this? Incidents in the Workplace
More information2014 NEC Changes Part 1 (Homestudy)
2014 NEC Changes Part 1 (Homestudy) Wisconsin Electrical License This course will review the first half of the most important National Electrical Code changes from the 2014 NEC. Changes in Articles 100-404.2
More informationELECTRICAL. 60 Minutes
ELECTRICAL 60 Minutes AGENDA Electrical definitions Electrical shocks, burns and secondary injuries Electrical hazards in the workplace Safety devices and prevention steps Do s and Don ts INTRODUCTORY
More information