Product Catalogue. SAFETY EQUIPMENT for Railway Systems

Transcription

1 Product Catalogue SAFETY EQUIPMENT for Railway Systems 8

2 Your Partner for Safety Equipment Since 1928 the name ARCUS equals quality and reliability in cable connections and safety products. The ARCUS ELEKTROTECHNIK ALOIS SCHIFFMANN GMBH is a highly specialised industrial enterprise in which high-quality products are designed and produced for the worldwide market. Our product range includes: Connectors and tools for underground cables Overhead line clamps Earthing and short circuiting devices with cables and bars Lance earthing devices for outdoor switchgear up to 80 ka/0.5 s and 63 ka/1 s High voltage detectors for nominal voltages up to 380 kv Detectors and phase comparators for encapsulated switchgear Compression material and compression tools Devices for current tapping and power supply Always in the centre of our activities: Our clients. Our top aim is their complete and long-term satisfaction! Highly qualified and motivated employees in our company in Munich and in our sales offices are the main condition for a successful conversion of customers' requirements. During the long history of our company we have always accepted some complex requirements of our customers as a challenge to be met. Cooperations with our business partners in technical projects which have in many cases resulted in products with exposed position on the world market. Technical know-how and the latest production techniques to insure long-term quality and reliability of our products. Availability by phone: For queries concerning products and delivery time, and to place an order by phone, we are available as follows: +49 (0)89/ Monday - Thursday: 8:00 am-12:00 noon and 12:30 pm-16:00 pm Friday: 8:00 am-12:00 noon Information concerning this catalogue: All rights reserved for copying of any kind. All dimensions and pictures are not binding. We permanently strive to improve products and reserve the right to change design, dimensions or material.

3 Contents General List of Type Numbers 4 Introduction 5 Railways (Catenary Wire) Earthing Components Phase clamps 8 Clamps for contact wires 10 Earthing clamps 12 Rail earthing clamps 14 Earthing and short-circuiting cables 16 Ball point connectors 17 Earthing Rods Telescopic earthing rods 18 Earthing rods with plug-in connections 19 Earthing Systems Earthing systems for contact wires (profile-free devices) 20 Earthing systems for contact wires (non profile-free devices) 22 Earthing system for feeder lines 27 Earthing system for pylons at rail tracks 28 Earthing systems for construction machinery 29 Bridging devices for rails 30 High Voltage Detectors ARCUSDETECT M - High voltage detector for contact wires and feeder lines 31 ARCUSDETECT M - High voltage detector for railway networks 32 ARCUSDETECT M - High voltage detectors for substations 33 Accessories Carrying bags 34 Carrying cases 36 Suspension hooks (for profile-free earthing) 37 Stopper for earthing cable 37 Wall holders 38 Storage systems 39 Underground Railway Systems Earthing Devices for Underground Railway Systems 40 Clamps for Current Rails 42 Earthing System with Earthing Cable and Clamps 43 Tram Feeding Rod for Traction Current 44 3

4 List of Type Numbers Type Number Page Type Number Page Type Number Page General

5 Introduction Dear reader! Work in or at electric railway installations requires a number of safety steps to minimise or eliminate dangers caused by moving rail vehicles or by electric current. Such safety steps are not always carried out by employees of the railway company, but in emergency cases also by fire brigades or other rescue workers. General Special importance is given to the clear marking of working limits, as well as a permanently secured absence of voltage within these working limits. Specially in train stations with unclear criss-crossing of lines, or on open railtrack with a number of lines running in parallel over long distances and influencing each other, securing the working place is essential. Also the subject of visibility has importance as in many cases an earthing device at the same time marks the working limit. Under any circumstance this working limit needs to be clearly visible, not only at daylight, but also at night, in tunnels, or when a number of pylons and lines in the background make recognition of an earthing rod difficult. Frequently work needs to be carried out during train operation hours, in often very short intervalls without trains, so handling of material is rough. Material will be more strained than from similar operations in utility networks, wear is considerable, and at the same time concessions towards reliability are to be excluded. 5

6 Introduction General High voltage detectors which are to be handled with care as a safety-relevant measuring device, have to withstand many downfalls into the stony roadbed. Earthing material which needs to be carried to the working place over long distances may already suffer superficial damages, but these must not compromise its usage. In order to meet these special requirements, railway material in most cases has its own standards. One example among others is the standard for high voltage detectors for catenary wires (contact wire detector), or the fact that for earthing material higher final temperatures in case of a short circuit are admissible. This way cross-sections of copper leads can be restricted, to make an earthing device portable even over longer distances. In the course of many years a multitude of different products for testing absence of voltage, earthing and short-circuiting, potential equation, and for marking working limits were developed in cooperation with German Railway DB, Austrian National Railways ÖBB, Swiss National Railways SBB, Belgian Railway SNCB, and other European rail companies. Before a product may be named railway material, it has to fulfill requirements demanded by the user, and in many cases pass a practical test over several weeks, to finally pass a formal approval procedure by the customer. 6

7 Introduction This catalogue will give you an overview about our programme of safety equipment for railway systems. We have arranged these products in different groups to facilitate identification. All important details are listed in a table and supported by pictures. General In case of uncertainties how to find a product or how to select a suitable one, please contact us. You will find our contact details on the backside of this catalogue. ARCUS Schiffmann offers you not only a vast range of safety equipment for railway systems, but furthermore will be pleased to support you in selecting the suitable products. This service is a matter of course for us! 7

8 Earthing Components Phase clamps ARCUS phase clamps are suitable for connection to round and flat conductors, ball point and T-bolt connectors. All phase clamps are provided with a spindle shaft according to DIN Construction of phase clamps enables removal of foreign layers (soiling, corrosion) from contact areas. Simple and safe clamping to conductor by fastening with screw thread method. Phase Clamp Clamping Range Connection Bolt Lead Cross Section [mm²] DB Material Number Type Number Round Ø 5-35 mm M12 max Round Ø mm M12 max Flat up to 20 mm, round Ø 9-22 mm, T-bolts up to 20 mm max. 120 M12 Ball point connectors up to Ø 25 mm max Further models available upon request.

9 Earthing Components Type Number Material (contact parts): Strap: Copper alloy, tin-plated Pressure piece: Copper alloy, tin-plated Type Number Material (contact parts): Strap: Aluminium alloy Pressure piece: Aluminium alloy Type Number With test strip to determine absence of voltage Material (contact parts): Strap: Aluminium alloy Pressure piece: Aluminium alloy Test strip: Galvanised steel 9

10 Earthing Components Clamps for contact wires ARCUS clamps for contact wires are suitable for a number of figure-eight wires, round and double contact wires. All clamps for contact wires are provided with a test strip to determine absence of voltage and a catch device for use as installation aid. All clamps for contact wires are provided with a spindle shaft according to DIN Construction of clamps for contact wires enables removal of foreign layers (soiling, corrosion) from contact areas of contact wire. A disc spring package (not in type no ) secures a constant, high and vibration-proof contact force. Simple and safe installation on contact wire by screw thread method. A separate electric connection of the pressure piece secures optimum current tapping from contact wire. Clamps for Contact Wires Contact Wire Connection Bolt Lead Cross Section [mm²] DB Material Number Type Number Ri (DIN ); Ø 10.6 up to 13.2 mm M10 max Ri (DIN ); Ø 10.6 up to 13.2 mm M10 max Ri (DIN ); Ø 10.6 up to 13.2 mm M10 max Ri (DIN ); Ø 10.6 up to 13.2 mm M10 max Ri (DIN ); Ø 10.6 up to 13.2 mm M10 max Single and double contact wire SNCB M12 max Further models available upon request.

11 Earthing Components Type Number With rigid bayonet spindle Material (contact parts): Strap: Copper alloy, tin-plated Pressure piece: Copper alloy, tin-plated Test strip/catch device: Hot-dip galvanised steel Type Number With elongated (+5 mm) and rigid bayonet spindle Material (contact parts): Strap: Copper alloy, tin-plated Pressure piece: Copper alloy, tin-plated Test strip/catch device: Hot-dip galvanised steel Type Number With compact test strip and catch device Material (contact parts): Strap: Copper alloy, tin-plated Pressure piece: Copper alloy, tin-plated Test strip/catch device: Stainless steel Type Number With elongated and flexible bayonet spindle Material (contact parts): Strap: Copper alloy, tin-plated Pressure piece: Copper alloy, tin-plated Test strip/catch device: Hot-dip galvanised steel Type Number With rigid bayonet spindle and elongated cross pin Material (contact parts): Strap: Copper alloy, tin-plated Pressure piece: Copper alloy, tin-plated Test strip/catch device: Hot-dip galvanised stee Type Number Single and double contact wire SNCB Material (contact parts): Strap: Aluminium alloy, tin-plated Pressure piece: Aluminium alloy, tin-plated Test strip: Stainless steel Catch device: Hot-dip galvanised steel 11

12 Earthing Components Earthing clamps ARCUS earthing clamps are suitable for a multitude of pylon constructions. Clamp bodies are made of high-strength copper alloy or aluminium alloy. All earthing clamps are provided with conical top or serrated surface made of tempered material (except type no ) to cut through foreign layers (soiling, corrosion, varnish). Simple and safe installation by screw thread method. Earthing Clamp Clamping Range Connection Bolt Lead Cross Section [mm²] DB Material Number Type Number Flat up to 24 mm M12 max Flat up to 40 mm M12 max Flat up to 20 mm, round Ø 9-22 mm, T-bolts up to 20 mm max. 120 M12 Ball point connectors up to Ø 25 mm max Further models available upon request.

13 Earthing Components Type Number With hand screw for simple and safe installation, and anti-twist groove on cable lug connection. Material (contact parts): Contact plate: tempered steel, tin-plated Pressure piece: tempered steel, tin-plated Type Number With grooved circular top for optimum piercing through foreign layers. Material (contact parts): Grooved top: Stainless steel Centring tip: Stainless steel Type Number With plastic handle for simple and safe installation, and anti-twist groove on cable lug connection. Material (contact parts): Strap: Copper alloy, tin-plated Pressure piece: Copper alloy, tin-plated 13

14 Earthing Components Rail earthing clamps ARCUS rail earthing clamps are suitable for a number of different rail profiles. Based on the construction of the rail earthing clamps, foreign layers and especially corrosion are pierced or part-removed from rail foot or rail head, so that an optimum mechanic and electric contact is obtained. Simple and safe installation on rails. Rail Foot Earthing Clamp (Profile-Free Earthing) Rail Profile Connection Bolt Lead Cross Section [mm²] DB Material Number Type Number UIC 60 M12 max S 49, S 54, S 64, UIC 60 M12 max SNCB (50 T, UIC 60, A74/UIC 60A, 63 T) M12 max S 49, S 54, S 64, UIC 60 M12 max S 49, S 54, S 64, UIC 60 M12 max Rail Head Earthing Clamp (Non Profile-Free Earthing) Rail Profile SBB6 (UIC 60), SBB4 (similar to S 54), SBB1, SBB5 SBB6 (UIC 60), SBB4 (similar to S 54), SBB1, SBB5 Connection M10 (special cable connection) Ball point connector Ø 25 mm Lead Cross Section [mm²] DB Material Number Type Number max max Further models available upon request.

15 Earthing Components Rail foot earthing clamps (profile-free earthing) Type Number With undetachable ratchet for comfortable and safe installation. Material (contact parts): Centring tip: Steel, ceramic-plated Pressure piece: Steel, surface coated Type Number With hand screw for simple and safe installation. Material (contact parts): Centring tip: Steel, ceramic-plated Pressure piece: Steel, surface coated Type Number With undetachable ratchet for comfortable and safe installation, especially suitable for heavily corroded rails. Material (contact parts): Centring tip: Steel, ceramic-plated Pressure piece: Steel, surface coated Type Number With connection to ratchet 1/2 square-end. Material (contact parts): Centring tip: Steel, ceramic-plated Pressure piece: Steel, surface coated Type Number With hand grip, for distance rail to concrete of max. 20 mm. Material (contact parts): Centring tip: Steel, ceramic-plated Pressure piece: Steel, surface coated Rail head earthing clamps (non profile-free earthing) Type Number With hand screw for simple and safe installation. Material (contact parts): Top pressure piece: Copper alloy, tin-plated Bottom pressure piece: laminated fabric with glassfibres Type Number With hand screw for simple and safe installation, with ball point connector Ø 25 mm. Material (contact parts): Top pressure piece: Copper alloy, tin-plated Bottom pressure piece: laminated fabric with glassfibres 15

16 Earthing Components Earthing and short-circuiting cables All earthing cables meet the required tension test values of IEC d1 d2 Earthing cables are made of highly-flexible copper lead with PVC-coating. Transitions from cable lug to lead coating are enclosed by a stabilising, tenacious elastic transparent sleeve. This mechanic kinking protection guarantees a reliable sealing against moisture ingress. Transparency of insulation enables visibility of copper leads up to the copper cable lug barrel, so that damages of strands caused by ageing can be identified early. Carrying bag page 34 and following. Earthing and Short-Circuiting Cables Cable Length [mm] Lead Cross Section [mm²] Palm Hole Red Flags DB Material Number d1 [mm] d2 [mm] Type Number Further models available upon request.

17 Earthing Components Ball point connectors Safe usage on numerous established pylon constructions of electric railways. Ball point connectors made of high-strength copper, tinplated, nuts and washers made of galvanised steel Type Number DB Material Number Earthing bar made of copper with 2 ball point connectors Ø 25 mm, firmly connected to an earthing clamp for ball point connectors Ø 25 mm. This multiple earth connection takes up 2 one-polar short-circuiting cables. Type Number Earthing bar made of copper with 3 ball point connectors Ø 25 mm, firmly connected to an earthing clamp for ball point connectors Ø 25 mm Type Number DB Material Number Ball point connector Ø 25 mm, thread: M16x47 mm Material: Ball point connectors made of high-strength copper, tin-plated, nuts and spring washers made of galvanised steel. Type Number DB Material Number Ball point connector Ø 25 mm, thread: M16x27 mm Type Number DB Material Number Earthing plate with 2 ball point connectors Ø 25 mm Type Number DB Material Number Earthing plate with 1 ball point connector Ø 25 mm Palm hole: Ø 12.5 mm Further models available upon request. 17

18 Earthing Rods Telescopic earthing rods All extendable earthing rods are designed for the requirements of earthing and short-circuiting electric contact wires. They are used to guide one-polar devices to catenaries, feeders, and traction power lines. LT LG Depending on requirements on transport length, these earthing rods are available in 2- or 3-section versions. For better visibility in the track area, some of these earthing rods are provided with red marks on the lower rod part. Coupling heads are suitable to take up phase clamps (page 8) and clamps for contact wires (page 10) which have a spindle shaft to DIN The earthing rods are equipped with telescopic connections. This enables varied usage lengths until stop at full extension. Type nos and are provided with a hand protection disc instead of a black ring. Carrying bags, cases and wall holders, see page 34 and following. Telescopic Earthing Rods LG [mm] LT [mm] Coupling Head N-Parts DB Material Number Type Number Safety bayonet head Safety bayonet head with locking function Safety bayonet head with locking function Aluminium bayonet Aluminium bayonet Safety bayonet head with locking function Safety bayonet head with locking function Safety bayonet head with locking function Further models available upon request.

19 Earthing Rods Earthing rods with plug-in connections LT All earthing rods with plug-in connections are designed for the requirements of earthing and short-circuiting electric contact wires. They are used to guide one-polar devices to catenaries, feeders, and traction power lines. LG Due to short transport length especially suitable for traction vehicles, technical emergency services, and fire brigades. Depending on the total length required, these earthing rods consist of 5 or 7 parts. For better visibility in the track area, these earthing rods are provided with red marks on the lower rod part. Compact coupling heads are suitable to take up phase clamps (page 8) and clamps for contact wires (page 10) which have a spindle shaft to DIN These earthing rods are equipped with very robust couplings. Carrying bags, cases and wall holders, see page 34 and following. Plug-In Earthing Rods LG [mm] LT [mm] Bag Coupling Head N-Parts DB Material Number Type Number Safety bayonet head with locking function Safety bayonet head with locking function Safety bayonet head with locking function ) Safety bayonet head with locking function ) with cable decoiler on mid-section Further models available upon request. 19

20 Earthing Systems Earthing systems for contact wires (profile-free devices) Safe usage on numerous established pylon constructions of electric railways. Easy to maintain and repair. Warning flag or other colour markings for clear visibility of device. Carrying bags, cases and wall holders, see page 34 and following. Type Number SBB Number Telescopic earthing rod (3-section) with safety rod head and take-up devices for cable and earthing clamp Total length: 5770 mm; Transport length: 2320 mm Earthing and short-circuiting cable, 50 mm², mm long Clamp for contact wires Type Number (page 10) Earthing clamp Type Number (page 12) Suspension hook and cable guidance for installation on pylon Type Number (page 37) Warning flag for clear visibility of earthing device Device suitable for: Contact wire: Ri (DIN ); Ø mm Earth connection: Flat up to 24 mm 20 Further models available upon request.

21 Earthing Systems Earthing systems for contact wires (profile-free devices) Type Number DB Material Number Earthing and short-circuiting cables with 3 red flags, 50 mm², mm long Type Number (page 16) Clamp for contact wires Type Number (page 10) Rail foot earthing clamp Type Number (page 14) Suspension hook and cable guidance for installation on pylon Type Number (page 37) Device suitable for: Contact wire: Ri (DIN ); Ø mm Rail: S 49, S 54, S 64, UIC 60 Type Number DB Material Number Telescopic earthing rod (2-section) with safety rod head Type Number (page 18) Earthing and short-circuiting cables with 3 red flags, 50 mm², mm long Type Number (page 16) Clamp for contact wires Type Number (page 10) Rail foot earthing clamp Type Number (page 14) Suspension hook and cable guidance for installation on pylon Type Number (page 37) Device suitable for: Contact wire: Ri (DIN ); Ø mm Rail: S 49, S 54, S 64, UIC 60 Further models available upon request. 21

22 Earthing Systems Earthing systems for contact wires (non profile-free devices) Safe usage. Easy to maintain and repair. Warning flag or other coloured markings for clear visibility of device. Carrying bags, cases and wall holders, see page 34 and following. Type Number DB Material Number Due to favourable transport length especially suitable for traction vehicles, technical emergency services, and fire brigades. Pluggable earthing rod (5-part) with safety rod head and tubular bag Type Number (page 19) Earthing system Type Number (page 23) Device suitable for: Contact wire: Ri (DIN ); Ø mm Earth connection: Flat up to 24 mm 22 Further models available upon request.

23 Earthing Systems Earthing systems for contact wires (non profile-free devices) Type Number x Earthing and short-circuiting cables with 3 red flags, 50 mm², 8500 mm long Type Number (page 16) 2x Clamp for contact wires Type Number (page 10) 2x Rail foot earthing clamp Type Number (page 14) Carrying bag for cables Type Number (page 35) Device suitable for: Contact wire: Ri (DIN ); Ø mm Rail: S 49, S 54, S 64, UIC 60 Type Number Earthing and short-circuiting cable with 3 red flags, 50 mm², 8500 mm long Type Number (page 16) Clamp for contact wires Type Number (page 10) Rail foot earthing clamp Type Number (page 14) Device suitable for: Contact wire: Ri (DIN ); Ø mm Rail: S 49, S 54, S 64, UIC 60 Further models available upon request. 23

24 Earthing Systems Earthing systems for contact wires (non profile-free devices) Type Number DB Material Number Telescopic earthing rod (2-section) with safety rod head Type Number (page 18) Earthing system Type Number (page 23) Device suitable for: Contact wire: Ri (DIN ); Ø mm Rail: S 49, S 54, S 64, UIC 60 Type Number Pluggable earthing rod (2-part) with fixed phase clamp similar to Type Number (page 8) and take-up devices for cable and earthing clamp Total length: 4600 mm; Transport length: 2600 mm Earthing and short-circuiting cable, 95 mm², 4600 mm long Earthing and short-circuiting cable, 95 mm², 1500 mm long 2x Rail head earthing clamp Type Number (page 14) Warning flag for clear visibility of earthing device Device suitable for: Conductor: Round Ø mm Rail: SBB6 (UIC 60), SBB4 (similar to S 54), SBB1, SBB5 24 Further models available upon request.

25 Earthing Systems Earthing systems for contact wires (non profile-free devices) Type Number SBB Number Pluggable earthing rod (2-part) with fixed clamp for contact wire similar to Type Number (page 10) and take-up device for cable and earthing clamp Total length: 4600 mm; Transport length: 2600 mm Earthing and short-circuiting cable, 50 mm², 4600 mm long Earthing and short-circuiting cable, 50 mm², 1500 mm long 2x Rail head earthing clamp Type Number (page 14) Warning flag for clear visibility of earthing device Device suitable for: Contact wire: Ri (DIN ); Ø mm Rail: SBB6 (UIC 60), SBB4 (similar to S 54), SBB1, SBB5 Further models available upon request. 25

26 Earthing Systems Earthing systems for contact wires (non profile-free devices) Usage: Due to favourable transport length especially suitable for traction vehicles, technical emergency services, and fire brigades. Carrying bags, cases and wall holders, see page 34 and following. Type Number Telescopic earthing rod (3-section) with safety rod head Type Number (page 18) Earthing system Type Number (page 23) Device suitable for: Contact wire: Ri (DIN ); Ø mm Rail: S 49, S 54, S 64, UIC Further models available upon request.

27 Earthing Systems Earthing system for feeder lines Carrying bags, cases and wall holders, see page 34 and following. Type Number Earthing and short-circuiting cable, 50 mm², 4000 mm long, Type Number (page 16) Phase clamp Type Number (page 8) Earthing clamp Type Number (page 12) Device suitable for: Conductor: Ø 6-35 mm Earth connection: Ball point connector Ø 25 mm T-bolt up to 20 mm Flat up to 20 mm Round Ø 9-22 mm Further models available upon request. 27

28 Earthing Systems Earthing system for pylons at rail tracks Usage: Earthing device for pylons at rail tracks (potential equalisation). Carrying bags, cases and wall holders, see page 34 and following. Type Number Earthing and short-circuiting cable, 50 mm², 4000 mm long Type Number Rail foot earthing clamp Type Number (page 14) Earthing clamp Type Number (page 12) Device suitable for: Rail: S 49, S 54, S 64, UIC 60 Earth connection: Ball point connector Ø 25 mm T-bolt up to 20 mm Flat up to 20 mm Round Ø 9-22 mm 28 Further models available upon request.

29 Earthing Systems Earthing systems for construction machinery Usage: Protective earth for construction machinery. Carrying bag page 34 and following. Type Number DB Material Number Earthing and short-circuiting cable, 50 mm², mm long Type Number (page 16) Rail foot earthing clamp Type Number (page 14) Earthing clamp Type Number (page 12) Device suitable for: Rail: S 49, S 54, S 64, UIC 60 Earth connection: Ball point connector Ø 25 mm T-bolt up to 20 mm Flat up to 20 mm Round Ø 9-22 mm Type Number Earthing and short-circuiting cable, 50 mm², mm long Type Number (page 16) Rail foot earthing clamp Type Number (page 14) Earthing clamp Type Number (page 12) Device suitable for: Rail: S 49, S 54, S 64, UIC 60 Earth connection: Ball point connector Ø 25 mm T-bolt up to 20 mm Flat up to 20 mm Round Ø 9-22 mm Further models available upon request. 29

30 Bridging Devices for Rails Picture shows Usage: Earthing device for bridging running rails (potential equalisation). Type Number Earthing and short-circuiting cable, 95 mm², 1600 mm long 2x Rail foot earthing clamp Type Number (page 14) Carrying bags, cases and wall holders, see page 34 and following. Type Number Earthing and short-circuiting cable, 95 mm², mm long 2x Rail foot earthing clamp Type Number (page 14) Device suitable for: Rail: S 49, S 54, S 64, UIC 60 Device suitable for: Rail: S 49, S 54, S 64, UIC Further models available upon request.

31 ARCUSDETECT M - High Voltage Detector for Contact Wires and Feeder Lines According to VDE 0681 partp 6 Usage: This high voltage live line detector tests absence of voltage on catenaries with single-phase a.c. of Un=15 kv and nominal frequency of 16.7 Hz. Suitable for outdoor use. Audible and visual indication Self-test including test electrode Simple battery change Temperature range: -25 C up to +50 C Humidity: 20-96% LG LH LI LV Carrying bag included Type Overview DB Material Number ( ) DB Material Number ( ) U n [kv] f [Hz] Net system LG [mm] LV [mm] effectively single-side isolated 1-phase system LI [mm] LH [mm] Transport Length [mm] N-Parts Bag Type Number 15 16, , Further information can be found in our Technical Information Capacitive Voltage Detectors and Voltage Detections Systems. 31

32 ARCUSDETECT M - High Voltage Detector for Railway Networks Basically to IEC (frequency 16.7 Hz) (and following DIN VDE V ) Usage: This high voltage live line detector tests absence of voltage on railway networks with singlephase a.c. of Un=15 kv and nominal frequency of 16.7 Hz. Suitable for outdoor use. Visual indication Self-test including test electrode Simple battery change Temperature range: -25 C up to +50 C Humidity: 20-96% Threaded fork contact for overhead lines Transport eye for carabiner LO LH Li Ai Carrying bags, cases and wall holders, see page 34 and following. Type Overview DB Material Number U n [kv] f [Hz] Net system LO [mm] Ai [mm] Li [mm] LH [mm] Transport Length [mm] N-Parts Bag (1) Type Number 15 16, ) not included in the delivery effectively single-side isolated 1-phase system 32 Further information can be found in our Technical Information Capacitive Voltage Detectors and Voltage Detections Systems.

33 ARCUSDETECT M - High Voltage Detectors for Substations Basically to IEC (frequency 16.7 Hz) (and following DIN VDE V ) Usage: This high voltage live line detector tests absence of voltage in substations with nominal frequency of 16.7 Hz. Suitable for outdoor use. Audible and visual indication Self-test including test electrode Simple battery change Temperature range: -25 C up to +50 C Humidity: 20-96% LO LH Li Ai Carrying bags, cases and wall holders, see page 34 and following. Type Overview U n [kv] f [Hz] Net system Single voltage detectors LO [mm] Ai [mm] Li [mm] LH [mm] Transport Length [mm] N-Parts Bag (1) Type Number 15 16, , Voltage range detectors 10, , , ) not included in the delivery effectively single-side isolated 1-phase system Further information can be found in our Technical Information Capacitive Voltage Detectors and Voltage Detections Systems. 33

34 Accessories Carrying bags Tubular bags Design: Polyester, royal blue 2x belt strap black 1 shoulder strap Lid with zipper Inside with transparent pocket for instruction for use Dimensions [mm] Type Number Ø 150x820 long Ø 150x1020 long Ø 150x1100 long Ø 150x1220 long Ø 150x1320 long Ø 150x1420 long Ø 150x1520 long Ø 150x1620 long Ø 150x1720 long Tubular bags Design: Cotton cloth, olive coloured Anti-fouling, water-repellent 2x belt strap black 1 shoulder strap String closure Dimensions [mm] Type Number Ø 200x1800 long Ø 200x2200 long Ø 200x2400 long Further models available upon request.

35 Accessories Carrying bags Carrying bag Design: Tarpaulin, royal blue 1x belt strap black With belt closure Inside with transparent pocket for instruction for use Suitable for 2-part high voltage detectors H [mm] L [mm] Pockets Type Number Type Number Carrying bag for earthing cables Design: Tarpaulin, royal blue 2x belt strap black With zipper Inside with transparent pocket for instruction for use Dimensions [mm]: WxDxH: 420x120x Wrapping bag Design: Tarpaulin 1x belt strap black With belt closure Inside with transparent pocket for instruction for use H [mm] L [mm] Pockets Colour Type Number grey royal blue royal blue royal blue Further models available upon request. 35

36 Accessories Carrying cases Carrying case for high voltage detectors Basic version: Shell of plastic material with foamed inlay Outside Dimensions H [mm] W [mm] D [mm] Type Number Carrying case for high voltage detectors Robust model: Shell of rigid plastic material with aluminium frame and foamed inlays Outside Dimensions H [mm] W [mm] D [mm] Type Number

37 Accessories Suspension hooks (for profile-free earthing) Type Number For profile-free earthing of catenaries, a suspension hook is required. This way the earthing and short-circuiting cable is fixed at the pylon at a distance from the railtrack (see page 21). Type Number For profile-free earthing of catenaries, a suspension hook is required. This way the earthing rod is fixed at the pylon at a distance from the railtrack (see page 20). Stopper for earthing cable Type Number Suitable to stop suspension hook Type Number on profile-free earthing devices (e.g. Type Number and on page 21) The stopper can be mounted easily and fast. 37

38 Accessories Wall holders For storage of high voltage detectors, operating rods and earthing rods Easy and fast installation with 2 screws. Wall holders are made of very strong plastic material. Type Number For insulating rods with tube diameter Ø mm Type Number For insulating rods with tube diameter Ø mm Type Number For insulating rods with tube diameter Ø mm 38

39 Accessories Storage systems Storage brackets help to prevent material damage during storage of earthing and shortcircuiting device and earthing rods. To protect the highly flexible earthing cables, the contact areas of the bracket are rounded. Storage brackets are available in two sizes, and alternatively in plastic or sheet steel material. A clip made of spring steel takes up one earthing rod (for outside tube diameters of Ø mm). H W D 50 Bracket with clip for earthing rod H [mm] W [mm] D [mm] Material Maximum Load [kg] Type Number plastic steel, plastic-coated Bracket only (no clip) H [mm] W [mm] D [mm] Material Maximum Load [kg] Type Number plastic steel, plastic-coated

40 Earthing Devices for Underground Railway Systems Construction with current rail contact from bottom side Usage: These ARCUS short circuiting devices are suitable for earthing and short circuiting underground railtracks with voltages up to 1 kv. These devices are kept in trains, stored in train stations, but can also be found in fire brigade vehicles. Underground railway systems construction with current rail contact from top side Materials for construction with current rail contact from bottom side: Running rail contact: Aluminium alloy Current rail contact: Electrolytic copper Earthing cable: Copper lead, PVC-insulated Tension spring storage: Galvanised steel Jointing and fixing parts: Galvanised steel Frame: Synthetic tube, glassfibre-reinforced Materials for construction with current rail contact from top side: Running rail contact: Electrolytic copper Current rail contact: Electrolytic copper Earthing cable: Copper lead, PVC-insulated Tension spring storage: Galvanised steel Jointing and fixing parts: Galvanised steel Frame: Plates made of polyamide Standardizer - eigene Arbeit own work. CC BY-SA 3.0 Further information can be found in our Technical Information Short-Circuiting Device for Underground Railways. 40

41 Earthing Devices for Underground Railway Systems Construction for power supply from top side Construction for power supply from bottom side C B C Type A B Type B Selection of Types: Design B [mm] C [mm] Railtrack System Type Number Typ A Berlin, Germany Typ A Rotem, Korea Typ A Athen, Greece Typ B Hamburg, Germany Typ B Hamburg, Germany Typ B Rotterdam, the Netherlands Typ B Berlin, Germany Typ B Taipei, Taiwan Typ B Munich, Germany Typ B Munich, Germany Typ B Vienna, Austria Typ B Brussels, Belgium Typ B Prague, Czech Republic Typ B Amsterdam, the Netherlands Typ B Singapore Typ B Helsinki, Finland Typ B Mailand, Italy Typ B Rotem, Korea Typ B Bangkok, Thailand Typ B Berlin, Germany Typ B Bangalore, India Underground railway systems Further information can be found in our Technical Information Short-Circuiting Device for Underground Railways. 41

42 Clamps for Current Rails Usage: ARCUS current rail clamps are suitable for a number of current rail profiles, on the railtrack of underground train systems up to 1kV. The construction of current rail clamps enables piercing of foreign layers on the rail foot or rail head, especially aluminium oxide, or helps to partially remove foreign layers, in order to obtain an optimum mechanic and electric contact. Underground railway systems Material (contact parts): Strap: Aluminium alloy Pressure piece: Aluminium alloy Installation: Clamp is installed by means of fullyinsulated handle Current Rail Clamps Rail Profile Connection Bolt Type Number DIN Form A 5100 M Underground Railtrack Docklands (London) M Rail foot width max. 85 mm M Suburban Train Systems, Berlin M Further models available upon request.

43 Earthing System with Earthing Cable and Clamps Usage: To earth and short-circuit current and running rail. Carrying bags, cases and wall holders, see page 34 and following. Current rail Running rail Underground railway systems Type Number: Device suitable for: Current rail: DIN A5100 Running rail: S 49, S 54, S 64, UIC 60 Parts of device: Current rail clamp: Type Number (page 43) Earthing and short-circuiting cable: 95 mm², 1100 mm long, made of highly flexible copper with transparent coating Rail foot earthing clamp: Type Number page 14 Type Number: Device suitable for: Current rail and running rail: Suburban Train Systems, Berlin Parts of device: Current rail clamp: Type Number (page 42) Earthing and short-circuiting cable: 95 mm², 2000 mm long, made of highly flexible copper with transparent coating Rail foot earthing clamp: Type Number page 14 Further models available upon request. 43

44 Feeding Rod for Traction Current Usage: As all means of urban public transport, also tram vehicles have to be maintained, repaired or examined. Usually this happens in closed workshop halls, where all necessary work can be carried out independently from weather, under optimum conditions. In these workshops, tram vehicles can be inspected and maintained from all sides, also from underneath and on the top side. Some halls are also equipped with heavy-duty roof cranes, in order to lift complete tram vehicles. For safety reasons, in many cases it is impossible to install the contact wire for power supply in the entire workshop. Either the contact wire ends a few metres in front of the hall, or it continues for a short distance into the hall and ends there. Without contact wire it is neither possible to manouvre tram vehicles inside the hall, nor to test certain electric functions. One possible solution for this problem is to manouvre tram vehicles with haulers inside the hall, and to secure power supply for tests of certain functions by means of a power feeding conductor which is connected to the vehicle. Tram ARCUS has developed a system in cooperation with a number of transport companies. It provides the tram vehicle with power through its pantograph, in order to manouvre and test the tram inside the workshop hall. 44 Further information can be found in our Technical Information Feeder Rod for Tram Vehicle Power Supply.

45 Feeding Rod for Traction Current X 2 2 detail Y detail X Y Components 1) Microswitch - secures possibility of power supply to pantograph only after the feeder rod for traction current was safely connected to the pantograph of the tram vehicle. 2) Universal clamp - construction of clamp jaws enables removal of foreign layers (soiling, corrosion) from panthograph 3) Catch strip - helps to connect the universal clamp 4) Rod top part and rod lower part - insulating epoxy-resin tubes 5) Power feeder conductor - feeds the required operating current 6) Hand protection disc 7) Push-button switch - custom-built 8) Handgrip - by turning hand grip the universal clamp closes or opens (2) 9) Control cable - connects safety equipment in maintenance areas (prevention of faulty operations) Tram Feeding Rod for Traction Current Microswitch Item 1 Universal clamp Item 2 Catch strip Item 3 Rod top part/ rod lower part Item 4 Power feeder conductor Item 5 Hand protection disc Item 6 Push-button switch Item 7 Handgrip Item 8 Control cable Item 9 Type Number

46

47

48 Catalogues "Safety Equipment" Capacitive Voltage Detectors and Voltage Detection Systems Fully-Insulated and Part-Insulated Earthing and Short Circuiting Devices for Low Voltage Applications Safety Equipment for Railway Systems Phone General +49 (0) 89 / Fax General +49 (0) 89 / Fax Sales Department +49 (0) 89 / Internet info@arcus-schiffmann.com Seat of the Company Truderinger Str. 199 D Munich Layout: Marion Renz Edition: Subject to change without notice Copyright ARCUS Schiffmann