NDSC-34 MKI - Rescue Boat Davit
|
|
|
- Lawrence Wilkerson
- 5 years ago
- Views:
Transcription
1 NDSC-34 MKI - Rescue Boat Davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0048 Rev. Date: Rev. No: 3 Tel: Fax: mail@norsafe.com Enterprise No.: NO
2 1. REGULATIONS AND CERTIFICATION Applicable rules and regulations Certificate Other certificate In accordance with IMO/ SOLAS requirements, LSA Code and European Council Directive 2014/90/EU on Marine Equipment (MED) MED Class certificate or flag acceptance on request 2. DAVIT SPECIFICATION 2.1. GENERAL DAVIT Type Rescue Boat Davit Model NDSC-34 MKI Application Rescue boat & Life raft handling Drawing reference G , G , G , G Execution Hydraulic slewing arm davit Boarding position Inboard / Outboard on deck level Operating position From deck side and from inside the boat (Gravity lowering) Davit system weight 2800 kg, davit incl. winch (dry weight) Safe Working Load (SWL) 34 kn (max. 4.5 m slewing radius) Trim / list conditions 10 / 20 Max. lowering height 40 m (including 10 /20 trim/list condition) Operation temperature -20 C till +45 C (other range on request) Max. hoisting speed Hydraulically 18 m/min Max. lowering speed According to SOLAS regulation (S = H) Manual hoisting By manual hand-cranking Pivot bearing type Slewing bearing Wire sheaves Galvanized, equipped with ball bearings Installation 1 (one) deck welding point (reduced installation time) Deck reinforcement requirements See general arrangement drawing Davit system H / W / D See general arrangement drawing Deck space required See general arrangement drawing The Norsafe NDSC slewing davit system is especially designed for safe and efficient launching and retrieval of Norsafe Rescue Boats and life rafts. The davit system is designed for long time operation in a tough and corrosive marine/offshore environment and to fulfil all requirements as given in latest SOLAS/IMO requirements. The system will allow: - Hoisting and lowering of the fully loaded rescue boat up to 20 list and 10 trim. - Gravity lowering of the fully loaded boat up to 20 list and 10 trim, completely independent of any power supply. - Hoisting of the loaded rescue boat by electric motor. - Dead ship slewing of the rescue boat by the nitrogen accumulator installed on the davit arm. - Retrieval of the rescue boat by manual hoisting. - Manual slewing by hand pump. 2
3 The davit system has a hydraulically driven, mechanical slewing jib and an electric driven winch with single wire fall. Slewing and dead ship slewing functions are driven by a small hydraulic power pack. The hydraulic system is equipped with a stored power unit - which allows full operation of the davit in dead ship conditions. The davit is designed to achieve optimum performance in terms of safety and reliability, and minimal maintenance levels. All selected equipment is chosen and installed to ensure the lowest possible emission of sound and for good access for service and repair. A HPU is included, and is located inside of the davit pedestal. All internal hydraulic piping is properly done and completed on the entire davit system. A remote control for start/stop of el motor on HPU as well as hoisting and slewing control is also included. When the button is released, davit operation will cease immediately. A thermal overload relay in the starter cabinet protects the electrical motor against overheating in case of excessive loads. A safety valve is installed in the hydraulic power unit. This safety valve prevents the davit from slewing loads in excess of the Safe Working Load and protects the system and motor from being overloaded. The winch is fitted with a one-way clutch. In the event of power loss during hoisting, the brake will automatically activate and davit motion will stop. A centrifugal brake is located on the winch. The brake controls the speed of descent for the lifeboat. The brake is enclosed, and provides reliable operation in all climate conditions. Electrical limit switches are used to cut power to the winch, if the boat is hoisted above stowage height. Electrical limit switches will prevent the boat from being hoisted above its upmost position / stowed position. Electrical limit switches on the winch provide failsafe operation of the hand crank. For launching in dead ship conditions, stored power from accumulator and gravity lowering system in winch provides safe launching. Starter cabinet is mounted on HPU as standard. All electrical cables for davit control, included 42V AC to rescue boat when that is needed is installed and terminated by Norsafe. Only main power supply is required. 3
4 2.2. WINCH AND WIRE Type DW-34 winch Drawing reference DS Execution Electrical hoisting and lowering / Gravity lowering / Manually hoisting / Manually fast hoisting Brakes type Centrifugal brakes Wire rope type Galvanized, rotation resistant (certified item) Wire rope diameter, MBL and spec. Ø 18 mm, MBL 204 kn, 1960N/mm 2 Inner / outer wire end Secured to drum / Swaged eye Connection shackle in thimble Included (certified item) 2.3. ELECTRICAL Electric power supply Electrical cabinet Remote control Limit switch Power consumption Starting method Duty rating Motor space heating Electrical cabinet heating Wiring Cables type Transformer Emergency stop 440V/3ph/60Hz (other on request) IP56 IP56 IP kw (HPU); 18.0 kw (Winch) DOL - Direct on line S2-10 min Included, 40W Heat loss from 42V transformer Included, (only power supply cable required) Marine type, flame retardant halogen free Included, 440/42VAC (other on request) Yes, mushroom type 2.4 HYDRAULIC Type Independent integrated hydraulic system Oil flow 22.7 l/min (at 50Hz); 27.4 l/min (at 60Hz) Max. working pressure 230 bar Oil amount 47 l Motor type 132M-4 Hydraulic accumulators 1x Bladder type 50L (120 degree slewing angle) System fittings ISO (DIN 2353) bite type fittings Fittings and hose fittings Zinc chromate Cr(VI)-free, secured with Denso tape Tubes AISI 316L UV and weather protection Shielded from environmental exposure 4
5 2.5 PAINTING SYSTEM Blasting SA 2.5 Specification ISO / NORSOK M-501 System Jotun system 1-85 Coating Three (3) layers (other on request) Total dry film thickness 300 µm 2.6. DOCUMENTATION Layer 1 Barrier - 90 µm, Layer 2 Jotacote Universal Alu µm, Layer 3 Hardtop CA - 50 µm - RAL 7030 (Grey) Technical specification davit General arrangement drawing Hydraulic flow diagram HPU drawing Electrical wiring diagram Starter cabinet drawing Product certificate Lubrication oil chart Spareparts list Operation & Maintenance manual Installation manual Preservation & storage procedure 3. PACKING Format Packed for transport in a 20 ft standard container 4. OPTIONS Note: Some options influence davit weight and performance, some option combinations may be incompatible. Maximum SWL must not be exceeded. GENERAL DAVIT Spare parts for 2 years, 5 years or 10 years Combined rescue / raft davit function (maximum handling of rescue boat and 2 rafts) Rescue boat release hook Automatic release raft hook (including triangle plate) Combined raft-/rescue hook Increased accumulator capacity (increased stored power slewing angle, up to max.300 degree) Winterization / cold climate heating / canvas solutions Other painting system and final color Metallizing, Thermal spraying (extra corrosion protection of surface) Commissioning performed by Norsafe or Norsafe Service Partners Other options on request 5
6 ELECTRIC SYSTEM Voltage variation Protection box for remote control Ex-proof, Zone II 2 G Ex de IIB T3 (other on request) Star starting method Additional electric cabinet heater Alternative cabinet size / material / surface protection HYDRAULIC SYSTEM Stainless steel fittings and hose fittings Stainless steel HPU tank Alternative HPU size / material / surface protection HPU heater Increased accumulator capacity (increased stored power slewing angle, up to max.300 degree) DOCUMENTATION Factory acceptance test procedure Factory acceptance test report Inspection and test plan Shipping, handling and lifting procedure Packing & unpacking procedure Commissioning procedure TAG list Hydraulic flushing procedure Winch drawing Noise test report Hydraulic flushing report Weight and COG datasheet Weighing report/certificate Other drawings/documentation/procedures 6
7 5. POSSIBLE BOATS FITTING THIS DAVIT SYSTEM The below Norsafe boats fit the NDSC-34 davit systems. Norsafe Matrix-450 MKI Norsafe Midget-530 MKII Norsafe Mako-655 MKI Norsafe Midget-500 MKII Norsafe Merlin-615 MKI (Others on request) 6. YARD SUPPLY Transport Deck foundations / reinforcement Assembly, erection and welding to deck Wire routing on davit and termination All cables to starter cabinet and agreed interface Hydraulic oil filling Testing according to regulation after installation onboard Preservation and maintenance after davit arrived yard and installed Depending on contract 7
NDA-25 MKI - Rescue Boat Davit
NDA-25 MKI - Rescue Boat Davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0038 Rev. Date: 11.10.2016 Rev. No: 3 Tel: +47 37 05 85 00 Fax: +47 37 05 85
NDA-25B MKI Fast Rescue Boat Davit
NDA-25B MKI Fast Rescue Boat Davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0039 Rev. Date: 14.11.2016 Rev. No: 2 Tel: +47 37 05 85 00 Fax: +47 37 05
LH-140 MKIII Lifeboat davit
LH-140 MKIII Lifeboat davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail: mail@norsafe.com Enterprise No.: NO940411696 www.norsafe.com 1. REGULATIONS
E-150 MKI - Single Pivot Gravity Davit
E-150 MKI - Single Pivot Gravity Davit Norsafe Project No.: TBA Norsafe Doc. No.: TSD-0054 Rev. Date: 14.10.2016 Rev. No: 4 Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47
NRB-20 MKI Rescue boat davit
NRB-20 MKI Rescue boat davit Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail: mail@norsafe.com Enterprise No.: NO940411696 www.norsafe.com 1. REGULATIONS
Technical specification for LH-230 Lifeboat Davit
Technical specification for LH-23 Lifeboat Davit Issued for information PGO GNI GNI REV.: DATE: Reason for Issue / Description: Norsafe Project No.: Project Title: Made By: Checked By: Project Approve
Technical specification for NDA 40 NO Rescue Boat Davit
Technical specification for NDA 40 NO Rescue Boat Davit 1.06.014 Weight information added PGO ESO GNI 1 18.06.013 Re issued for construction PGO GNI GNI 0 Issued for construction PGO GNI GNI REV.: DATE:
Technical specification for NDC 40 NO Rescue Boat Davit
Technical specification for NDC 40 NO Rescue Boat Davit 8.06.203 Re issued for construction PGO GNI GNI 0 25.04.203 Issued for construction PGO GNI GNI REV.: DATE: Reason for Issue / Description: Project
Midget-530 MKII, Waterjet
Midget-530 MKII, Waterjet Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail: mail@norsafe.com Enterprise No.: NO940411696 www.norsafe.com 1. REGULATION AND
GES-21 MKI - Free Fall Lifeboat
GES-21 MKI - Free Fall Lifeboat Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0071 Rev. Date: 30.09.2016 Rev. No: 2 Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85
Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0013 Rev. Date: Rev. No: 1
MAXIMA-120 MKI Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0013 Rev. Date: 15.09.2016 Rev. No: 1 Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail: mail@norsafe.com
Technical Specification LH-200-NO R-002 Cantilever Davit
Technical Specification LH200NO R002 Cantilever Davit Issued for release GNI KNT GNI REV.: DTE: Reason for Issue / Description: Project Title: Made By: Checked By: pprove dby: Customer Document No.: Total
GES-45 MKI. Enterprise No.: NO Tel: Fax:
GES-45 MKI Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail: mail@norsafe.com Enterprise No.: NO940411696 www.norsafe.com 1. REGULATION AND CERTIFICATION
GES-52 MKI. Enterprise No.: NO Tel: Fax:
GES-52 MKI Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail: mail@norsafe.com Enterprise No.: NO940411696 www.norsafe.com 1. REGULATION AND CERTIFICATION
2.0 TECHNICAL SPECIFICATION:!
0 of 6 HYDRAMARIN 2.0 TECHNICAL SPECIFICATION: 2. OPERATION ENVIRONMENT: Area classification: Safe zone Description: Offshore/Marine environment, open deck Operation temperature range: -20 - + 45 degrees
Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0442 Rev. Date: Rev. No: 1
Munin-1200 Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0442 Rev. Date: 26.03.2018 Rev. No: 1 Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail: mail@norsafe.com
Marathon-900 RIB. Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0269 Rev. Date: Rev. No: 2
Marathon-900 RIB Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0269 Rev. Date: 20.03.2018 Rev. No: 2 Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail: mail@norsafe.com
Munin S-1200 open version
Munin S-1200 open version Norsafe Project No.: xxxxxxxxxxx Norsafe Doc. No.: TSB-0274 Rev. Date: 27.03.2018 Rev. No: 1 Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05
Marathon 900 RIB-D. Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0508 Rev. Date: Rev. No: 1
Marathon 900 RIB-D Norsafe Project No.: TBA Norsafe Doc. No.: TSB-0508 Rev. Date: 20.03.2018 Rev. No: 1 Norsafe AS P.O. Box 115 N-4852 Faervik, Norway Tel: +47 37 05 85 00 Fax: +47 37 05 85 01 E-mail:
HYTECH ENGINEERING & SERVICES
Products About us Hytech Engineering & Services specializes in the operations and maintenance, modifications, procurement, development, and manufacturing of customized hydraulic and automated products
Content. Chapter Remark Page. Company profile Gebuwin bv 1. Engineering 2.
Content Chapter Remark Page Company profile Gebuwin bv 1. Engineering 2. Worm gear winches WW250-500-1000-1500../D WW250-500-1000-1500../2D WW2000-3000-4000-5000../D WW2000-3000-4000-5000../2D WW2000-3000-4000-5000../D/FS
Crane systems. Marine Cranes
Crane systems Marine Cranes Foldable Knuckle Boom Range PK Marine cranes from Palfinger systems have everything needed for tough daily applications. Optimised synergy of function and design. All safety
EXPLOSION-PROOF ELECTRIC WIRE ROPE HOIST BWX
The BWX electric wire rope hoists are the best as versatility and features, matching requirements of hazardous area. One single lifting speed or two lifting speeds are got with the application of inverter
SH GROUP FACILITIES. Kuopiovej Svendborg. Denmark
SH GROUP FACILITIES Kuopiovej 20. 5700 Svendborg. Denmark. +45 6221 7810. sh@shgroup.dk www.shgroup.dk SH GROUP A/S - HEADQUATERS DENMARK SH Group head office administration, service, sales and engineering
FULLY HYDRAULIC TRUCK CRANE
CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Main Hoisting line winch speed Auxiliary winch Main Hoisting winch speed Auxiliary winch
1 TECHNICAL DESCRIPTION:
2 of 6 HYDRAMARIN OFFSHORE KNUCKLE JIB CRANE TYPE: HMC 3568 LKO 250-32 (750-20) (000-5)(500-0)(00-33) AHC TECHNICAL DESCRIPTION:. GENERAL INTRODUCTION: The HYDRAMARINE HMC 3568 LKO 250-32 (750-20) (000-5)(500-0)(00-33)
the strength of 70 years experience
the strength of 70 years experience For years Gebuwin has played an important part on the market of hoisting equipment, with hand driven winches taking pride of place. For these winches, we handle the
HYDRAULIC TRUCK CRANE GT-600EX CARRIER : TC section, 11.0 m 43.0 m DIMENSION Overall length. approx. 13,170 mm Overall width
HYDRAULIC TRUCK CRANE SPEC. SHEET NO. GT-6E-1-31/EX-2 GT-6EX CARRIER : TC-42-2 GENERAL DATA CRANE CAPACITY 6, kg at 3. m BOOM 5-section, 11. m 43. m DIMENSION Overall length approx. 13,17 mm Overall width
FAR FROM THE COASTS, CLOSE TO THE BEST CHOICE YOU EVER MADE
FAR FROM THE COASTS, CLOSE TO THE BEST CHOICE YOU EVER MADE Absolute expertise, absolute accuracy, absolute reliability. Nothing else. M.E.P. Pellegrini Marine Equipments proposes a complete fshore crane
CONTROL CONSOLES FAMOR S.A. UL. KASZUBSKA BYDGOSZCZ POLAND
CONTROL CONSOLES FAMOR S.A. UL. KASZUBSKA 25 85-048 BYDGOSZCZ POLAND tel. +48-52/366-82-02 fax +48-52/366-82-03 e-mail:marketing@famor.pl http://www.famor.pl CONTROL CONSOLES DESIGNATION In our consoles
OPERATION AND MAINTENANCE MANUAL FOR RELEASE MECHANISM
OPERATION AND MAINTENANCE MANUAL FOR RELEASE MECHANISM (MODEL : TALONⅡ 4.0, TALONⅡ 6.0, TALON 9.0 ) Revision 10 / September 23, 2014 (Document No. : H1000-90000) HLB C o., L t d. 272-12, Dangwol-ro, Onsan-Eup,
76,6 m 40,9 m. 16,5 t. 70,0 m 3,9 t ( 4,0 t) 2,0 m. 50,0 m 6,9 t ( 7,0 t) 40,0 m 9,2 t ( 8,3 t)
1 Schedule drawing 1.1 Schedule drawing 21,2 m 76,6 m 40,9 m 1,0 m 2,5 m 18,7 m 1,1 m 2,6 m 4,0 m 19,2 m - 24,6 m 16,5 t 1,9 m 7,7 m 75,0 m 3,2 t ( 3,3 t) 70,0 m 3,9 t ( 4,0 t) 2,0 m 60,0 m 5,2 t ( 5,3
Technical data Hydraulic lift crane LR 1300 W
Technical data Hydraulic lift crane LR 1300 W Dimensions Basic machine with undercarriage 6390 3000 10570 1475 1760 20 5160 3820 8520 9675 520 4260 1700 1200 00 20 7100 520 00 9 R6 8560 20365 Operating
FROM THE SEA TO THE LANDS. OUR WORKS DOCK TO SOLVE YOUR NEEDS
FROM THE SEA TO THE LANDS. OUR WORKS DOCK TO SOLVE YOUR NEEDS Absolute expertise, absolute accuracy, absolute reliability. Nothing else. Pellegrini s name became firmly established with Italian shipyards/owners
ReadyMoor Series II. ReadyMoor Series II Quick Release Hooks and Capstans. Efficient cost effective mooring solutions off the shelf. Ready to go.
Trelleborg MARINE SYSTEMS ReadyMoor Series II ReadyMoor Series II Quick Release Hooks and Capstans Trelleborg Marine Systems has developed a standardized series of Quick Release Hooks (QRHs) to meet a
Pillar and wall-mounted slewing jibs and cranes. Workplace efficiency improvement with the Demag crane range
Pillar and wall-mounted slewing jibs and cranes Workplace efficiency improvement with the Demag crane range System components and installations As a pioneer in overhead materials handling, Demag Cranes
Technical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
Technical data Hydraulic lift crane LR 1160
Technical data Hydraulic lift crane LR 1160 Dimensions Basic machine with undercarriage R 7700 9700 5120 3500 3000 2200 1620 3770 1500 7200 3625 1000 4800 575 8460 1610 6800 6800 1475 R 5900 15175 6600
Small centrifugal fans made of plastic
Small centrifugal fans made of plastic durable application-optimised wide range of variants 2 Small centrifugal fans made of plastic Index Small centrifugal fans made of plastic HF R 75-16 D and HF R 110-18
Hoists & Winches. :: Electric Chain Hoists 26 :: Manual Hoists 30 :: Pneumatic Hoists 31 :: Winches 32 :: Beam Trolleys 34
Hoists & Winches Lifting & Handling Equipment :: Electric Chain Hoists 26 :: Manual Hoists 30 :: Pneumatic Hoists 31 :: Winches 32 :: Beam Trolleys 34 Electric Chain Hoists Compact Electric Chain Hoists
Electric Wire Rope Hoists MH and MHM Types
Electric Wire Rope Hoists MH and MHM s 0 WIRE ROPE ELECTRIC HOISTS Lifting capacity from 2 up to 32 000. More than 2 000 000 wire rope electric hoists of the well known "T" series have been sold by Balkancarpodem
Y-fl'. MINISTRY OF TRANSPORT AND COMMUNICATIONS DEPARTMENT OF MARINE ADMINISTRATION
MINISTRY OF TRANSPORT AND COMMUNICATIONS DEPARTMENT OF MARINE ADMINISTRATION No-363/421, Corner of Merchant & Theinbyu Road, Botataung Township, Yangon, Myanmar E-mail : d gdma.mm@ gmail.com; dma.myan@smail.com
TADANO ROUGH TERRAIN CRANE : GR-700EX. (Left-hand steering) G E N E R A L D ATA
SPEC. SHEET No. GR-7E-1-214/EU-51 DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-7EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY BOOM 7, kg at 3. m 5-section, 11.5 m 44. m DIMENSION Overall
4 Remote I/O. Enclosures for Fieldstations Series 8126 (Customer-Specific)
4 Remote I/O Series 86 078E00 Series 86 enclosures of glass-fibre reinforced polyester resin or of high grade steel are used in larger control stations and control station combinations. Special sizes are
GENERAL SPECIFICATION. FRSQ 700 A 370 HP inboard FAST RESCUE BOAT
GENERAL SPECIFICATION FRSQ 700 A 370 HP inboard FAST RESCUE BOAT Pasteurdijk 8 3846 BS Hardewijk The Netherlands boats@palfinger.com Index. 1. Introduction... 3 1.1. Measurements... 3 Detailed description
TADANO TRUCK CRANE. Provisional Specifications GENERAL DATA. 4-section, 10.5 m 33.0 m
DATE July, 2006 TADANO TRUCK CRANE MODEL : TL-300E Provisional Specifications GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5 m 33.0 m DIMENSION MASS Overall length approx. 12,670 mm
6. Working radii are measured from centre of swing and under load.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 20 m main boom, consisting of A frame, boom foot (7 m), boom head (7 m), boom extension (6 m), 60.6 t basic counterweight,
Technical data Hydraulic crawler crane HS 895 HD
Technical data Hydraulic crawler crane HS 895 HD Dimensions Basic machine with undercarriage R 9760 3650 10000 5480 3675 2445 1810 3950 1610 1700 7945 9360 3975 1720 R 6360 1100 6800 620 17380 Operating
Crawler Crane LR
Crawler Crane LR 1130 EN LR 1002.03 Dimensions Basic machine with undercarriage R 6530 2970 85 6050 3040 1954 1530 3640 1250 6750 7970 3355 1360 1000 6350 440 1345 R 5700 13930 5310 Operating weight The
Ground bearing pressure 1.08 kg/cm 2. Main boom (No xx) max. length High reach (No xx and 1309.xx)
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 17 m main boom, consisting of A frame, boom foot (7 m), boom head (10 m), 50.9 t basic counterweight, 20 t carbody
Max. lifting capacity: 100 t Max. lifting height: Max. working radius: 60 m
Telescopic Crawler Crane Max. lifting capacity: 100 t Max. lifting height: 83 m Max. working radius: 60 m Telescopic Crawler Crane Outstanding off-road capabilities and maneuverability 2 A long telescopic
5. For max. wind speed please refer to lift chart in operator s cab or manual.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn including wire ropes (260 m and 495 m) and 20 m main boom, consisting of A frame, boom foot (10 m), boom head (7 m),
PRIDE / EXCELLENCE Vessel Specification
PRIDE / EXCELLENCE Vessel Specification Length 130 m Call sign: LAKF7 / LCEY Breadth 28 m IMO: 9431915 / 9455997 Draught 8.2 m DNV, 1A1, DYNPOS Depth to 1 st Deck 12.0 m AUTRO, E0, CLEAN Deck Space 2,000
Launch and Recovery Systems for ROV/Ts
Offshore, Advanced Load Handling Launch and Recovery Systems for ROV/Ts TECHNICAL INFORMATION Deck/skid-mounted overside LARS Overhead-mounted overside LARS Moonpool-based LARS 1 Operational profitability
View thousands of Crane Specifications on FreeCraneSpecs.com. Technical data Hydraulic lift crane LR 1250
Technical data Hydraulic lift crane LR 1250 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800
YSX40E All Electric Yard Crane Spreader
A Tradition of Innovation Product Information YSX40E All Electric Yard Crane Spreader 20 30 40 Load combinations with YSX40E Bromma telescopic spreader YSX40E for yard cranes is an all-electric mid-range
Deck equipment for MPSV offshore vessels
www.triplex.no Deck equipment for MPSV offshore vessels 2 www.triplex.no TRIPLEX, a MacGregor company, is a major supplier of cranes and handling equipment to Offshore-, Fishery and Research vessels. Quality
03 MORDEC MORDEC MORDEC MORDEC MORDEC 15 MORDEC 16 MORDEC 17 MORDEC
Cranes 1 Contents: Company Introduction...... Page 03 MORDEC Cranes.........Page 04-06 MORDEC Marine Deck Crane...Page 07-10 MORDEC Offshore Pedestal Crane...Page 11-12 MORDEC Offshore Lattice Boom Crane....Page
GMC MARITIME AS MARINE EQUIPMENT RENTAL CATALOGUE
GMC MARITIME AS MARINE EQUIPMENT RENTAL CATALOGUE 19.06.2018 Page 1 GMC Maritime can offer a wide range of rental equipment and operational personnel from our base located in Stavanger and other sites
Technical data Hydraulic lift crane LR 1300 LR 1300
Technical data Hydraulic lift crane LR 1300 LR 1300 Dimensions Basic machine with undercarriage R 9750 3600 10350 6930 3000 LR1300 2250 1600 5000 1465 1700 8500 9650 4260 1870 1200 8000 400 R 6980 Optional:
TADANO ROUGH TERRAIN CRANE : GR-550EX. (Left-hand steering) G E N E R A L D ATA
DATE June, 21 TADANO ROUGH TERRAIN CRANE MODEL : GR-55EX (Left-hand steering) G E N E R A L D ATA CRANE CAPACITY 55, kg at 3. m BOOM 5-section, 11.1 m - 42.m DIMENSION Overall length Overall width Overall
Technical data Hydraulic crawler crane HS 875 HD
Technical data Hydraulic crawler crane HS 875 HD Dimensions Basic machine with undercarriage R 5710 2580 8300 3500 2110 1300 1240 4020 1400 5330 2600 1000 530 6480 2240 4900 R 5520 14100 Operating weight
NYBORG AS N-6230 SYKKYLVEN, NORWAY TEL FAX
NYBORG AS N-6230 SYKKYLVEN, NORWAY TEL +47 70 25 40 80 - FAX +47 70 25 29 08 office@nyborgfan.com - www.nyborgfan.com OPERATION AND MAINTENANCE NYBORG CIRCULAR FIRE DAMPER TYPE BSS 500-400 R-LD Version
SPECIFICATION. CRANE Specification. CARRIER Specification
CRANE Specification Description Model KATO FULLY HYDRAULIC ALL TERRAIN CRANE KA-1300SL Maximum lifting capacity 130ton 2.5m Boom length 11.8m 52.0m (6 section) SL jib length 9.2m-26.6m ( section) Hoisting
B BASIC HEAT TREATMENT CONSOLE
Maritime Stress PO Box 2898, 30 Estates Road Dartmouth, NS, B2W 4Y2, Canada Toll Free: 1-877-468-1781 Phone: (902) 468-7873 Fax: (902) 468-2304 Website: E-mail: info@maritimestress.com OPERATION MANUAL
BADA HEAVY INDUSTRIES
THE LIFE MESSENGER Creating a better Technology & Second lifeline Creating a better Technology & Second lifeline www.badahi.co.kr #1002, Jinyoung-ri, Jinyoung-eup, Gimhae-city, Gyengsangnam-do, Rep.of
TELESCOPIC BOOM CRAWLER CRANE 45 TON CAPACITY
TELESCOPIC BOOM CRAWLER CRANE 9010 45 TON CAPACITY VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel
Ground bearing pressure 0.98 kg/cm 2. Main boom (No xx) max. length Fixed jib (No xx)
The operating weight includes the basic machine with HD under carriage, 2 main winches 250 kn including wire ropes (90 m) and 11 m main boom, consisting of A frame, boom foot (5.5 m) and boom head (5.5
FULLY HYDRAULIC TRUCK CRANE
FULLY HYDRAULIC TRUCK CRANE CRANE Description Model Specification Maximum rated lifting capacity length Fly jib length Maximum lifting height Hoisting line speed Hoisting hook speed Main winch Truck crane
DECK EQUIPMENT LAUNCH SYSTEM SALES BROCHURE
DECK EQUIPMENT LAUNCH SYSTEM SALES BROCHURE Last Updated: 18/05/2017 1 Contents LAUNCH SOLUTIONS FOR ROV S... 3 LAUNCH SOLUTIONS FOR TRENCHING ROV s... 4 LAUNCH SOLUTIONS FOR PLOUGHS... 5 A-FRAMES / GANTRY
2013 USA Norway HSE Conference. Houston, Texas November 12, 2013
2013 USA Norway HSE Conference Houston, Texas November 12, 2013 Herkules acquiring Noreq and USH Announced on June10th. Herkules new owner of both Noreq and Schat Harding HARDING More than 900 employees
4. MAINTENANCE MANUAL
4. MAINTENANCE MANUAL 4.1 INTRODUCTION The maintenance program has been developed by ORIENTAL in accordance to our supplier s own maintenance program for each component. Conforming to this maintenance
TADANO ROUGH TERRAIN CRANE. (Right-hand steering) GENERAL DATA. 6-section, 5.3 m m
DATE February, 2009 TADANO ROUGH TERRAIN CRANE MODEL : GR-120NL (Right-hand steering) GENERAL DATA CRANE CAPACITY BOOM 12,000 kg at 2.0 m 6-section, 5.3 m - 23.8 m DIMENSIONS Overall length approx. 7,540
LARS. Leif Løken Rolls-Royce Marine Deck Machinery Seismic and Subsea
LARS Leif Løken Rolls-Royce Marine Deck Machinery Seismic and Subsea 2010 Rolls-Royce plc The information in this document is the property of Rolls-Royce plc and may not be copied or communicated to a
Ground bearing pressure 1.14 kg/cm 2. Main boom (No xx) max. length High reach (1311.xx and 1008.xx) 83 m Luffing jib (No xx) max.
The operating weight includes the basic machine with crawlers, 2 main winches 120 kn and 14 m main boom, consisting of A frame, boom foot (5.5 m), boom head (8.5 m), 32.3 t basic counterweight, 15 t carbody
MARINE EQUIPMENT. marine equipment marine equipment 97
MARINE EQUIPMENT 96 marine equipment marine equipment 97 Powerpack Total weight (without wire) 2.280 mm 1.280 mm 1.863 mm 2.500 kg Diesel engine Number of cylinders 4 Power 71 kw RPM 1.800 Cooling Radiator
CM170 TELESCOPIC CRANE CONTENTS ///////////////////////////////////////////////////////////////////////////////////////// Crane Features...4 Boom Diagram...5 Load Chart: Main Boom & Jib...6 LMI Codes...7
ABS Guide for Certification of Lifting Appliances 2016: Focus on machinery
ABS Guide for Certification of Lifting Appliances 2016: Focus on machinery Cernusco sul Naviglio, Italy 19 May 2016 Marine & Offshore Meeting 2016 Guide for Certification of Lifting Appliances Lifting
HERCULES SIGN POST DIGGER DERRICK
Introduction UTV International has manufactured a line of tracked carriers since 1992. In 1996, we integrated our first digger derrick onto a tracked carrier. Since then we have been engaged in a continual
ROUGH TERRAIN CRANE SPECIFICATION. Engine. Type. Transmission. Axles. Suspension. Brake system. Steering. Tire size.
ROUGH TERRAIN CRANE CRANE Specifi cation Maximum lifting capacity 70ton 2.5m length (6 section) Fly jib length 8.3m-13.2m (2 section, offset 7 60 ) Maximum rated lifting height 45.5m () 58.6m (jib) Hoisting
Mobile crane LTM Max. lifting capacity: Max. lifting height: Max. working radius: 48 m. Courtesy of Crane.Market
Mobile crane Max. lifting capacity: 55 t Max. lifting height: 56 m Max. working radius: 48 m Mobile Crane Flexibel and economical 2 A long telescopic boom, high capacities, an extraordinary mobility as
Lifeboat - Freefall - Dry cargo DC (type JY-FN-4.9)
Lifeboat - Freefall - Dry cargo - 490 DC (type JY-FN-4.9) Specifications: Length: 4,90 (meters) Height: 3,10 (meters) Width: 2,25 (meters Max persons: 16 Weight boat: 2775 (kilogram) Weight davit system:
Polyester Lifting Slings
Est. 969 Polyester Lifting Slings FASTLIFT Endless Roundsling (ERS) Roundslings with seamless single cover and protected label WLL Colour Weight Rec. min Rec. min Standard size range available (tonnes)
GMK Product Guide
GMK5180-1 Product Guide ANSI B30.5 Imperial 85% Features 180 t (210 USt) capacity 64 m (210 ft) six-section main boom 11 m (59.1 ft) swingaway with jib and/or boom inserts. Maximum 34 m (111.6 ft) length
Centrifugal fan with highly efficient EC drive motor
Centrifugal fan with highly efficient EC drive motor simple and safe application and installation 2 Why HLU? 90 years of experience in the plastics processing market More than 10.000 m² production in Germany
Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)
Power Jib (Stationary on rubber) (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1 Notes for the
Technical data Hydraulic crawler crane HS 885 HD
Technical data Hydraulic crawler crane HS 885 HD Dimensions Basic machine with undercarriage R 6910 2850 8300 3500 2210 1420 4120 1400 1400 2725 5490 6750 2100 1000 4920 590 R 5520 15200 Operating weight
Technical data Hydraulic crawler crane HS 835 HD
Technical data Hydraulic crawler crane HS 835 HD Dimensions Basic machine with undercarriage 2860 7360 3000 1700 1120 3260 990 1200 2360 4710 5650 1220 700 4300 310 R 4050 11250 Operating weight The operating
SHIP CRANES / WIRES PROBLEMS AND THEIR PREVENTION. Presented by Captain Paul Walton Director, Marine Consultant, LOC Hong Kong
SHIP CRANES / WIRES PROBLEMS AND THEIR PREVENTION Presented by Captain Paul Walton Director, Marine Consultant, LOC Hong Kong INTRODUCTION Types of Crane Offshore / Marine Statutory Requirements LOLER
Crawler Crane LR 1200 LR
Crawler Crane LR 1200 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 4600 1500 7520 8700 3740 1830 1200 7000 520 1345 R 6200 19200 7600 1200 5800 narrow
Powerful, versatile and reliable. Planetary Plug-in Gearboxes by Liebherr
Powerful, versatile and reliable Planetary plug-in gearboxes by Liebherr PEG 1000 * PEG 1100 * PEG 1200 PEG 250 Liebherr has been developing, designing and manufacturing high-performance, versatile planetary
Crawler Crane LR 1250 LR
Crawler Crane LR 1250 EN LR 1004.02 Dimensions Basic machine with undercarriage R 8700 3500 9700 6050 3000 2150 1600 1345 4600 1500 7520 8700 3740 1830 1200 7000 520 R 6200 19200 7600 1200 5800 narrow
Pillar and wall-mounted slewing jibs and cranes. Workplace efficiency improvement with the Demag crane range
Pillar and wall-mounted slewing jibs and cranes Workplace efficiency improvement with the Demag crane range System components and installations As a pioneer in overhead materials handling, we have been
CARRIER : TC CRANE CAPACITY 30,000 kg at 3.0 m
CARRIER : TC-4230 GENERAL DATA CRANE CAPACITY 30,000 kg at 3.0 m BOOM 4-section, 10.5m 33.0m DIMENSION Overall length approx. 12,670 mm Overall width approx. 2,490 mm Overall height approx. 3,450 mm MASS
Table of Contents. Boom. Power Jib. Boom. (Stationary on rubber) Boom. (Pick & Carry) Searcher hook. (Option)
Boom Power Jib Boom (Stationary on rubber) Boom (Pick & Carry) Searcher hook (Option) Searcher hook (Stationary on rubber)(option) Searcher hook (Pick & Carry)(Option) Table of Contents SPECIFICATION 1
MODEL : GT-550EX EURO-2
DATE February, 2007 TADANO TRUCK CRANE MODEL : GT-550EX EURO-2 GENERAL DATA CRANE CAPACITY 55,000 kg at 3.0 m BOOM 5-section, 11.1 m 42.0 m DIMENSION MASS Overall length approx. 13,480 mm Overall width
77 Ton Tele-Boom Crawler Crane. mantiscranes.com
15010 77 Ton Tele-Boom Crawler Crane mantiscranes.com VERSATILE. POWERFUL. DEPENDABLE. Tadano Mantis cranes are engineered as VERSATILE, heavy-duty machines. We match massive steel fabrications with diesel
Wire rope accessories. 5. Wire rope accessories. Index
Wire rope accessories 5. Wire rope accessories 1 General 1.1 About Hendrik Veder Group 1.2 Trade names 1.3 Certified Quality 1.4 Certificates 1.5 Key suppliers & brands 1.6 Contact information 1.7 Locations
GTC t Telescopic Boom Crawler Crane GENERAL DATA CRANE SPECIFICATION SPECIFICATION SHEET NO. TMC-DI /16
GENERAL DATA CRANE CAPACITY 80t at 3.0m BOOM DIMENSION Overall Length Overall Width (tracks extended) Overall Width (tracks retracted) Overall Width (tracks removed) Overall Height (working) MASS Gross
HITACHI ELECTRIC CHAIN HOISTS
HITACHI ELECTRIC CHAIN HOISTS Hitachi s reputation for excellence in design, quality, reliability and performance has made this brand a global market leader. With over three decades of proven reliability