DATE SUPPLY OF TOOLS & EQUIPMENT TENDER NOTICE
|
|
- Constance Todd
- 5 years ago
- Views:
Transcription
1 DESCRIPTION NOTIFICATION NUMBER ISSUE DATE CLOSING DATE SUPPLY OF TOOLS & EQUIPMENT IGRUA/BS/TOOLS&EQUIP/12-13/014 21/11/ /12/2012 TENDER NOTICE Indira Gandhi Rashtriya Uran Akademi, Fursatganj Airfield, Raebareli, U.P, (IGRUA), a premier flying training institution under the Ministry of Civil Aviation, Government of India, invites SEALED TENDERS from Manufacturer or Authorized Dealer/Distributor for supply of following mentioned Aviation Standard Work Shop Tools/Equipment as per given specification:- S/N PART NUMBER DESCRIPTION UNIT SPEC./SIZE QTY. REQ. 1 AVIONICS-00 Power Supply Unit Variable No VARIABLE AVIONICS-00 Signal Generator No Min/Max Range AVIONICS-00 Signal Generator (UHF/VHF) No AVIONICS-00 Audio Frequency Oscillators No AVIONICS-00 Cathode Ray Oscilloscope No AVIONICS-00 Frequency Meters No AVIONICS-00 Millammeter Movin Coil voltohm No AVIONICS-00 Variac No AVIONICS-00 Digital Multimeter No AVIONICS-00 IC/Microprocessors No AVIONICS-00 Digital Voltmeter/ohmmeter/ammeter No AVIONICS-00 Logic Probe No AVIONICS-00 RLC Bridge No AVIONICS-00 Voltage Standing Wave Meters No AVIONICS-00 AC-DC Power Supply No 0-24V AVIONICS-00 Bonding Testers No AVIONICS-00 TRF Receiver No AVIONICS-00 Intermediate Frequency Amplifier No AVIONICS-00 Frequency Converter No AVIONICS-00 Superheterodyne Aligment No AVIONICS-00 Bffer Doubler Amplifire No AVIONICS-00 RF Amplifier No Bch. Fitting-00 Cutting Metal Power Hacksaws No Bch. Fitting-00 Bench Drilling Machine No 0-1" ch Bch. Fitting-00 Drill Grinding No Bch. Fitting-00 Thread Cutting with Taps&dies and scraping. No Bch. Fitting-00 Steel Rule No 18" Bch. Fitting-00 Dividers in and out No Bch. Fitting-00 Calipers No Bch. Fitting-00 Micrometers No 0-1" 1.00
2 31 Bch. Fitting-00 Vernier No 0-25 mm Bch. Fitting-00 Combination Set SET Bch. Fitting-00 Surface Plate No 2'x4' Bch. Fitting-00 Dial Test Indicator No.0001' Bch. Fitting-00 Forging Equipment No Bch. Fitting-00 Heat Teatment Equipment No Bch. Fitting-00 Forging and Hand Forging No Bch. Fitting-00 Chisels Diff Size SET Bch. Fitting-00 Punchs and Holders SET Bch. Fitting-00 Hardening and Termpering Equipment No Sheet Metal-00 Aluminium Alloy Cutting Machine No Sheet Metal-00 Aluminium Marking out,drilling,forming.bending. No Sheet Metal-00 Formiliarise shrinking and flashing. No Sheet Metal-00 Forming sheet metal by pressing and rolling. No Sheet Metal-00 Riveting hand tools No Sheet Metal-00 pneumatic Riveting Tools No Sheet Metal-00 pneumatic Hammer, blind reveting insp of rivet. No Sheet Metal-00 Removal of revets and use of oversized rivet. No Sheet Metal-00 Heat treatment of aluminium alloy rivets. No Sheet Metal-00 Arbor Press No Sheet Metal-00 Steel Rule graduated in fractions of inches&mm No Sheet Metal-00 Out side and inside calipers No Sheet Metal-00 Try square No Sheet Metal cm dividers No Sheet Metal-00 Scriber No Sheet Metal-00 Fitters Tools set Sheet Metal-00 Round-nose and side-cutter pliers No Sheet Metal cm long and screwdrivers No Sheet Metal-00 Hacksaw No Sheet Metal-00 File diff size round,squire,flat.tringular No 2each Sheet Metal-00 Hand Drill Machine 1/4" No Sheet Metal-00 Set of center punch and pin punch set Sheet Metal-00 Ball pen and cross pane hammer No cm flat chisel and a set of 64 Sheet Metal-00 small chisel set flat,cross cut&round nose Sheet Metal-00 Plastic or hide-face hammer No Sheet Metal-00 Sheet metal snip No Sheet Metal-00 Various size and typesos screw driver set Sheet Metal-00 Maual Lathe Machine No 6' Sheet Metal-00 Table Vice No 6" AIRFRAME-00 Power Granding wheel for tool No 1.00
3 sharping 71 AIRFRAME-00 Power Drilling Machine No AIRFRAME-00 Large Surface Table for precision marking-off No 4'x3' AIRFRAME-00 Power Hacksaw for cutting stoclmaterial No AIRFRAME-00 Sheet Met al Guillotine No AIRFRAME-00 Hydraulic lifting jacks SET AIRFRAME-00 Desk for manuals and notices No AIRFRAME-00 Display board for inspection worksheets No AIRFRAME-00 Apron type fire extiguisher trolley No AIRFRAME-00 Ground electrical power trolley No AIRFRAME-00 Work benches No 4'x8'x3' AIRFRAME-00 Ladders No Hight 5'x3' AIRFRAME-00 Mobile Lifting Equipment No AIRFRAME-00 Spray Guns No 1/2 lts cap AIRFRAME-00 Set of ndouble-ended,open ended & ring sp. set american,bsf,unified AIRFRAME-00 Set of sockets wrenchs with handles and accessory. SET inches&mm AIRFRAME-00 Milling Machine No AIRFRAME-00 Surface grinding machine No AIRFRAME-00 Buffing Machine No AIRFRAME-00 Lath Machine Manual No 6' AIRFRAME-00 Rockwell Harness Tester No AIRFRAME-00 Ground Power Unit (Make Electrone) No DC2800HV AIRFRAME-00 Brinnel Harness Tester No WELDING-00 Set of oxyacetylene welding equipment No WELDING-00 Electric arc welding equipment No WELDING-00 Eye face shield,goggles, No WELDING-00 Leather gloves No WELDING-00 Aprons SET WELDING-00 Electrodes,welding rods and fluxes pkt WELDING-00 Laying up tables No WELDING-00 Brushes and spatulas No WELDING-00 Scissors and cutters No WELDING-00 Sandes No WELDING-00 Measuring Cup No WELDING-00 Heat Lamp No WELDING-00 Pots and trays No WELDING-00 Inverters and converters No INST-00 Oitot Static Leak Tester No INST-00 Landing Compass No INST-00 Megger No INST-00 RPY Table No INST-00 Bellow Control Unit No INST-00 Lanier Flow Clean Air Bench No 1.00
4 TERMS & CONDITIONS: 1. The cost quoted should be CIF- IGRUA, Fursatganj (cost inclusive of CHA, insurance & freight etc.) 2. No curr ency fluctuation will be catered for, if Supply/Work Order is placed within the validity period of the quotation. 3. Authorization copy of Distributorship/Dealership of product manufacturer should be enclosed with tender. 4. Bidders are advised to submit following documents along with their bid: i) Company VAT Registration. ii) iii) PAN Card of Company. Service Tax Registration etc. 5. Penalty of 0.25% of the basic order value will be levied every day beyond expiry lead time period in normal condition. 6. Sale Tax /Service Tax, if any, may be indicated separately. Tax exemption certificate form D or Form 3D will not be issued. 7. Your quote must be valid for 180 days for our acceptance from the closing date of tender. 8. Either the Indian agent on behalf of foreign principal or the foreign principal directly could bid in a tender but not both. 9. In case where and Indian agent participates in a tender on behalf of one manufacturer, he is not be allowed to quote on behalf of another manufacturer along with first manufacturer in a subsequent/parallel tender for the same item. 10. IGRUA is not responsible for the quotation lost in transit or not received in time including postal delay. 11. IGRUA reserves the right either to accept or reject the offers. IGRUA s decision will be final and no objections about the tender will be entertained. 12. Quantity mentioned above of items/products may be increased or decreased at the time of placing order. 13. Following documents must be submitted in respect of items/products supplied by you or by your principal agency:- i. Product Catalog of Tools/Equipment. ii. Invoice, packing sheet, dispatch documents specifying details of transport and Airway Bill etc. 14. The last receipt date of your sealed quotation is 14/12/2012 by 14:30 Hrs. through Courier/Postal Services or by company s representative and the same will be opened at 15:30 Hrs. on the same day in Office/Department (Bonded Store, Airport Area). In the event of closer of our office for any reason the tender will be opened on next working day at the same time. 15. The sealed tender envelope must be super-scribing thereon: Tender No.: IGRUA/BS/TOOLS&EQUIP/12-13/014. Issue Date: 21/11/2012 Closing Date: 14/12/2012.
5 The sealed tender envelope and other query, if any should be addressed to following mentioned official: KRISHNENDU GUPTA CHIEF ENGINEER INDIRA GANDHI RASHTRIYA URAN AKADEMI FURSATGANJ AIRFIELD, DISTRICT - RAEBARELI Tel: , Fax: krish.igrua@gmail.com
Phone:
KERALA AGRICULTURAL UNIVERSITY AGRICULTURAL RESEARCH STATION MANNUTHY 68065. THRISSUR Phone: 0487-37076 Email : arsmannuthy@kau.in RE-TENDER NOTICE No. B/400/ dated 0/03/06 Sealed tenders are invited for
More informationUnit: (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI.
Trade: Fitter Unit: 1+1+1 (For 63 students) ALL TOOLS & Machineries are made of high quality with prescribed specification of Govt of India DGE&T and QCI. S.NO FITTER TOOL KIT QTY Rate/Item Amount 1 Rule
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Marine and Outdoor Power Equipment Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours
More informationRAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES BASAR Nirmal District, Telangana Ref: RGUKT-B/Proc/Elec,Maint/Q08/2018, dated
RAJIV GANDHI UNIVERSITY OF KNOWLEDGE TECHNOLOGIES BASAR Nirmal District, Telangana -504107 Ref: RGUKT-B/Proc/Elec,Maint/Q08/2018, dated. 17.12.2018 NOTICE INVITING QUOTATIONS Description : Supply of Electrical
More informationLab Specifications. Automotive 2 Wheeler Repair
Lab Specifications Automotive 2 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the
More informationAUTOMOTIVE MANUFACTURING
REDESIGNED MODULES FOR THE SECTOR OF AUTOMOTIVE MANUFACTURING UNDER MODULAR EMPLOYABLE SKILLS (MES) Redesigned in - 2014 By Government of India Directorate General of Employment & Training Ministry of
More informationAIRPORTS AUTHORITY OF INDIA OFFICE OF THE AIRPORT DIRECTOR ल. ग. ब. हव ई L G B I AIRPORT, GUWAHATI TECHNICAL DIRECTORATE क ट शन
AIRPORTS AUTHORITY OF INDIA OFFICE OF THE AIRPORT DIRECTOR ल. ग. ब. हव ई L G B I AIRPORT, GUWAHATI TECHNICAL DIRECTORATE क ट शन Notice inviting Quotation Document No.AAI/GHT/E&M-01(Tyres) क लए व हन -,
More informationFACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Motor Vehicle Mechanic Level (circle one)
FACILITY ACCREDITATION CHECKLIST R: 04/27/06 APPRENTICESHIP Designated Trade: Level 1 2 3 (circle one) Institution: Evaluator(s) / / Rating Code: Y = Yes* N = No* R = Required * * Please use a CHECKMARK
More informationRECOMMENDED TOOLS AND CHECKERS. Page RECOMMENDED TOOLS AND CHECKERS... 2
RECOMMENDED TOOLS AND CHECKERS Page RECOMMENDED TOOLS AND CHECKERS........... 2 4 1 09010-3C100 Hexagon Wrench Set (09013-6C100) ( Wrench 5 ) (09013-6C110) ( Wrench 6 ) (09013-6C120) ( Wrench 8 ) (09013-6C130)
More informationCENTRAL UNIVERSITY OF JHARKHAND, RANCHI
CENTRAL UNIVERSITY OF JHARKHAND, RANCHI (A Central University established by an Act of Parliament in 2009) Ref no. CUJ/ P&S/EE/266/24 Dated:23-04-24 Sealed quotations are invited for the article enclosed
More informationTENDER. Enq. No. IIITMK/ 0648/18 Date: 07/09/18 Due on:17/09/20183pm
TENDER Enq. No. IIITMK/ 0648/18 Date: 07/09/18 Due on:17/09/20183pm On behalf of INDIAN INSTITUTE OF INFORMATION TECHNOLOGY & MANAGEMENT KERALA (IIITMK), the Registrar invites offers for supply and laying
More informationINVITATION FOR TENDER FOR SUPPLY OF SOLAR PV SYSTEMS
INVITATION FOR TENDER FOR SUPPLY OF SOLAR PV SYSTEMS Sealed tender offers are invited in two separate sealed covers (Technical and Commercial offers) from eligible manufacturers/suppliers or their direct
More informationLab Specifications. Automotive 4 Wheeler Repair
Lab Specifications Automotive 4 Wheeler Repair An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 If we have to promote the
More informationOCCUPATIONAL TOOLS AND EQUIPMENT LIST
OCCUPATIONAL TOOLS AND EQUIPMENT LIST Motor Vehicle Body Repairer (Metal and Paint) Government of Newfoundland Labrador Department of Advanced Education and Skills December 2011 Preface This document is
More informationRef:CL/Mech./ Cal /BID-01(13-14) Date: 10 July 2013
Ref:CL/Mech./ Cal /BID-0(3-4) Date: 0 July 203 SUBJECT: Procurement of Calibration Services for the Equipments in Central Laboratory (Mechanical). Dear Sirs, Technical & Commercial Bids are invited for
More informationElectrician Construction
Lab Specifications Electrician Construction An initiative of Ministry of Skill Development & Entrepreneurship, Govt. of India and National Skill Development Corporation 02 Shri Narendra Modi Honourable
More informationGuidelines for Registration of Private / Transport Vehicles
Guidelines for Registration of Private / Transport Vehicles A vehicle Registration Certificate is an official document providing proof of registration of a motor vehicle. It is used primarily by the government
More informationTECHNICAL BID T 3627
TECHNICAL BID T 3627 Supply of Mechanical Measuring Instruments for TMD-II OF UKAI TPS. Due on At 3.30 P.M. (if Possible) EMD paid YES / NO EMD D. D. No. Date : OR SSI / NSIC Certification Number : Duly
More informationv.meku rfkk fudksckj iz kklu ANDAMAN & NICOBAR ADMINISTRATION
e-mail:dirtpt@ and.nic.in Ph: 03192-232150 MT/1-11/PS/WS-Tools/2013-14/10736 v.meku rfkk fudksckj iz kklu ANDAMAN & NICOBAR ADMINISTRATION ifjogu funs kky; DIRECTORATE OF TRANSPORT Port Blair dated the
More information/ Telefax : No: 1(2)2015-E/ Battery& Charger TVH/ Dated:
प रस र भ रत / PRASAR BHARATI (भ रत य ल क स व प रस रक / INDIA S PUBLIC SERVICE BROADCASTER) द रदर शन क न द र / DOORDARSHAN KENDRA ह दर ब द / HYDERABAD 500 013.. Email : sgeddh@yahoo.com / sgeddh@gmail.com
More informationGOVERNMENT ITI DHANUVACHAPURA
Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized Public Disclosure Authorized HEAVY MACHINERY 1 Milling machine (vertical)size no1 with standard accessories & the
More information2011 Cat Hand Tools and Shop Supplies
2011 Cat Hand Tools and Introduction................................................................................................................................ 1-1 Hand Tools Section Index...................................................................................................
More informationSupply of Batteries
Supply of Batteries 207-8 SUPPLY OF BATTERIES OF VARIOUS RATINGS E-PROCUREMENT (REVERSE AUCTION) NIT No: 07/ 207-8 Name of the work Supply of Batteries to our Branches / Offices /ATM Completion Time EMD
More informationINVITATION FOR QUOTATION. TEQIP-III/2018/ntst/Shopping/35
INVITATION FOR QUOTATION TEQIP-III/2018/ntst/Shopping/35 29-Dec-2018 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the
More informationMotor Cycle Mechanic 1
Motor Cycle Mechanic 1 Training Objective: Motor Cycle is a popular use in urban as well as rural areas throughout the country. This course aims at producing semi skilled workers who can carryout minor
More informationSPECIFICATIONS OF ITEMS ANNEXURE-1A Sr. No. Item specification Qty. (in nos.) 1 Computer chair with armrest Approximate Size: Width 64 cm Depth 64cm Height 81.0-93.5 cm Seat Height 42-54.5 as Godrej Model
More informationShow Month. Sound Equipment $ $ $ $ $ $ $ $ $ Special Instructions
Sound Equipment Price List and Information This Order Form and payment must be postmarked or email 15 days prior to show opening date to 2016sa qualify for Advance Rate. All orders must be submitted with
More informationSAKHALIN ENERGY INVESTMENT COMPANY LTD. INVITATION TO TENDER
SAKHALIN ENERGY INVESTMENT COMPANY LTD. INVITATION TO TENDER For the purchase of inch instrument. All goods being offered for tender are located at PMD Yasnoye, Sakhalin Region, Russian Federation. General
More informationD Piece 12 Point Standard Metric Socket Set. D Piece 6 Point Metric U-Joint Socket Set mm List Price: $ $120.
D004004 28 Piece 6 Point Standard SAE/Metric Socket Set SAE Standard: 3/16-9/16 Metric Standard: 4-15 mm 2, 6 Extensions Hand Driver U-Joint 45 Tooth Ratchet List Price: $170.74 $112.99 D004008 9 Piece
More informationCITY OF MOBILE. Purchasing Department and Package Delivery: Government Plaza 4th Floor, Room S Government St Mobile, Alabama 36644
Mailing Address: P. 0. Box 1948 Mobile, Alabama 36633 (251) 208-7 434 CITY OF MOBILE Purchasing Department and Package Delivery: Government Plaza 4th Floor, Room S-408 205 Government St Mobile, Alabama
More informationDETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) Name of Article. Fitting Shop (Workshop)
DETAILS OF EQUIPMENTS/TOOLS OF VARIOUS SHOPS IN WORKSHOP (MECHANICAL ENGG.) S.No. Name of Article 1 Bench Vice 2 V block 3 Spanner Set 4 File Flat 5 Hacksaw Frame 6 Combination Set 7 Center Punch 8 Dial
More informationAMULFED DAIRY A UNIT OF GUJARAT CO-OPERATIVE MILK MARKETING FEDERATION LIMITED PURCHASE ENQUIRY
PURCHASE ENQUIRY Inquiry No : AFD/PUR/PKS/ENQ/FB, Dated: May 18, 2018 Description Qty : Purchase Inquiry for Supply of Forklifts, Battery Operated Hand Pallet trucks & Hand Pallet trucks for AFD & PFP
More information2AZ-FE ENGINE CONTROL SYSTEM
PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM 2AZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench Engine coolant temperature sensor 2 PREPARATION 2AZ-FE ENGINE CONTROL SYSTEM RECOMMENDED
More informationHkkjrh; izca/k lalfkku dksf"kddksm
Hkkjrh; izca/k lalfkku dksf"kddksm vkbz- vkbz-,e- dksf"kddksm dseil (ih-vk-s), dksf"kddksm 673 570, dsjy INDIAN INSTITUTE OF MANAGEMENT, KOZHIKODE IIM Kozhikode Campus P.O. Kozhikode- 673 570 Phone: 0495
More information1NZ-FE ENGINE CONTROL SYSTEM
PREPARATION 1NZ-FE ENGINE CONTROL SYSTEM 1NZ-FE ENGINE CONTROL SYSTEM PREPARATION SST 1 09817-33190 Sensor Socket Wrench 2 PREPARATION 1NZ-FE ENGINE CONTROL SYSTEM RECOMMENDED TOOLS 09082-00040 TOYOTA
More informationPRICE BID T Supply of various Tools & Tackles for TPS Ukai.
GUJARAT STATE ELECTRICITY CORPORATION LIMITED ISO 900:008, ISO 00:00 and OHSAS 800:007 CERTIFIED THERM AL PO WE R ST A TION, U K AI U K A I D A M 9 8 0, D I S T R I C T : T A P I Phone : 0 -, Fax : 0-00
More informationMISCELLANEOUS WOOD CHISEL
MISCELLANEOUS WOOD CHISEL In hanger WOOD CHISEL SET - Grounded and lacquered blade - Hardened blade - Ergonomic bimaterial handle 74 0 3,0 74 3,8 744 4 3,9 74 3,99 748 4, 7 0 4,3 7 4,34 7 4,43 pieces -
More informationTHE ORIENTAL INSURANCE CO.LTD. REGIONAL OFFICE: IDA Building 4 th Floor, 7,Race Course Road, Indore (M.P.) REQUIREMENT
THE ORIENTAL INSURANCE CO.LTD. REGIONAL OFFICE: IDA Building 4 th Floor, 7,Race Course Road, Indore -452003 (M.P.) ANNEXURE -III REQUIREMENT OICL intends to procure reputed brand Exide or Amara Raja or
More informationTOOLS & EQUIPMENT. For More information:
TABLE OF CONTENTS Hand Tools...2-11, 16-21 Air Tools... 12-15 Material Handling...21 Abrasives... 22-24 Box Level 3 vials read level, plumb, and 45 Length Duty Level Measuring Tools 776001 24" 776002 48"
More informationTENDER DOCUMENT. for SUPPLY, INSTALLATION, TESTING AND COMMISSIONING OF KITCHEN EQUIPMENT AT. Single-Stage: Two-Envelope.
Vol II BoQ1 STATE INSTITUTE OF HOTEL MANAGEMENT AND CATERING TECHNOLOGY (JOINTLY SPONSORED BY GOVT. OF INDIA & GOVT. OF TAMILNADU) THUVAKUDI, TIRUCHIRAPPALLI- 620 015. TENDER DOCUMENT for SUPPLY, INSTALLATION,
More informationTENDER FOR DG SET. Tender for DG SET. POCKET-14, SECTOR-8, PHASE-1, DWARKA, NEW DELHI Website: TENDER DOCUMENTS FOR
Cost of the Tender Form - Rs.500/- (Rupees Five Hundred only) Tender Form No.MCI/TENDER DGSET/2018 Tender for DG SET MEDICAL COUNCIL OF INDIA POCKET-14, SECTOR-8, PHASE-1, DWARKA, NEW DELHI 110 077 Website:
More informationTender No:- MTL/PUR/213/Elect/ (K)/9. 2 NEW Moulded case Circuit Breaker with O/L & S/C No 02
Tender No:- MTL/PUR/213/Elect/2015-16 (K)/9 Date:-26/10/2016 Type Of Bid Bidding type Bid closing On Bid Opening On EMD : LIMITED TENDER : Single Bid : 18/11/2016 at 14.00 hrs.(ist) : : As per Annexure
More informationSupply of 63 kva DIESEL GENERATOR SET WITH AMF
No. NIQ/INKEL/2015-16/162 24 TH Nov 2015 NOTICE INVITING QUOTATION Sealed Quotations are invited for and on behalf of INKEL Limited, having its registered office at INKEL Centre, Off Vallathol junction,
More informationPROCEDURES ON IMPORTATION AND REGISTRATION OF A CLASSIC MOTORCYCLE/SCOOTER IN SINGAPORE
10 Sin Ming Drive Singapore 575701 Tel: 1800 - CALL LTA (1800-2255 582) Fax: (65) 6553 5329 PROCEDURES ON IMPORTATION AND REGISTRATION OF A CLASSIC MOTORCYCLE/SCOOTER IN SINGAPORE Content Page Registration
More informationCITY OF MOBILE. Purchasing Department and Package Delivery: Government Plaza 4th Floor, Room S Government St Mobile, Alabama 36644
ryped by: DATE 08/14/2017 Mailing Address: P. 0. Box 1948 Mobile, Alabama 36633 (251) 208-7 434 nm Buyer: 002 CITY OF MOBILE Purchasing Department and Package Delivery: Government Plaza 4th Floor, Room
More informationMONDAY, DECEMBER 14 TH, 2015 *** 1:00 P.M. EST *** WELCOME TO THE AUCTION SALE OF
MONDAY, DECEMBER 14 TH, 2015 *** 1:00 P.M. EST *** WELCOME TO THE AUCTION SALE OF EQUIPMENT REPAIR SHOP 126 BRADWICK DRIVE,CONCORD, ONTARIO CANADA, L4K 1K8 TERMS & CONDITIONS FINAL PAYMENT IN FULL IMMEDIATELY
More informationONLY use MLR, Ast, or MST
2 3 4 5 6 7 8 9 0 2 3 4 5 6 7 8 9 20 2 22 23 24 25 26 27 28 29 30 3 TRANSPORTATION CLUSTER AUTO SERVICE TECHNOLOGY EQUIPMENT LIST ONLY use MLR, Ast, or MST Estimated Cost Each Estimated Total Cost Automotive
More informationCCE RF CCE RR NSQF LEVEL-2. General Instructions to the Candidate : This Question Paper consists of 34 objective and subjective types of question.
Tear here TEAR HERE TO OPEN THE QUESTION PAPER CCE RF CCE RR SL. No. : TTTT 34 ] [ 8 Total No. of Questions : 34 ] [ Total No. of Printed Pages : 8 : 88-EK Code No. : 88-EK NSQF LEVEL-2 & Subject : Automobile
More informationSmall Tool Instruments and Data Management
Small Tool Instruments and Data Management Dial Gauge Stands Pages 268 272 Comparator Stands Pages 273 274 Joint Magnetic Stands Concentricity testers Pages 275 280 Angulometers, steel squares Pages 281
More informationTools Online Retailer Returns - TRACY - February 16
s Online Retailer Returns - TRACY - February 16 Auction Opens: Fri, Feb 9 12:09pm PT Auction Closes: Fri, Feb 16 10:00am PT TB7000 Wheel Barrow TB7033 TB7001 Wheel Barrow TB7034 TB7002 Wheel Barrow Tub
More informationTCIL SAUDI COMPANY LIMITED RIYADH, KSA P.O. BOX RIYADH-11673, KSA Tel: Fax:
TCIL SAUDI COMPANY LIMITED RIYADH, KSA P.O. BOX 93263 RIYADH-11673, KSA Tel: + 966 1 2378658 Fax: + 966 1 2378678 Email : tcilscl@nesma.net.sa TENDER ENQUIRY FOR PLANT AND MACHINERY INSURANCE POLICY OF
More information1 JULY ~ 30 AUGUST 2013 Micro - Tec
*All Prices Excl VAT* WINTER SPECIALS E&OE 1 JULY ~ 30 AUGUST 2013 KI-1312 R1 277.00 Sq. Dr Heavy Duty Composite Mini * Impact Wrench *Handle Exhaust with Muffler Sq. Dr: : 11000RPM : Max Torque: 60 NM
More informationSUPPLY OF HYDRAULIC AERIAL LADDER PLATFORM
Page 1 of 13 SUPPLY OF HYDRAULIC AERIAL LADDER PLATFORM Sr. Name of firm No 1 NK Fire and Safety GIDC phase 1,opp. Anand Tiles, Wadhwan Dist. Surendranagar Gujarat Tender clause ref./tender Terms/Specifications
More informationBerufsweltmeisterschaft Calgary - Canada 1. Sep- 6. Sep 2009
Page 1 of 14 WorldSkills Competition Berufsweltmeisterschaft 1. Sep- 6. 07 INFRASTRUCTURE CNC LIST Milling Concours Mondial des Metiers CNC Fraisage CNC Fräsen Position: Contact: Details: Email: Phone:
More information(ISO 9001 CERTIFIED)
(ISO 9001 CERTIFIED) TENDER ENQUIRY FOR PROCUREMENT OF BULLET PROOF JACKET To Subject: TENDER ENQUIRY NO. 04/LP/2018-19/BPJ-2000/WIL-dt. 11-10-2018. You are requested to submit your quotations for the
More informationRef. No: 01/Electric/KC/Pc/17 Date: 24/11/2017
KATWA COLLEGE (Affiliated to the UNIVERSITY OF BURDWAN) Principal s Office KATWA 713 130 BURDWAN Tel.: (03453) 255049 E-mail: katcoll2009@gmail.com Website: www.katwacollege.ac.in Ref. No: 01/Electric/KC/Pc/17
More informationNOTICE INVITING QUOTATIONS
MALAVIYA NATIONAL INSTITUTE OF TECHNOLOGY JAIPUR No. F5(4020)ST/MNIT/Estate/2017 Phone : 0141-2713312,2713352 M/s......... NOTICE INVITING QUOTATIONS 1 Fax No. : 0141-2529078 1. Registrar, MNIT, Jaipur
More informationD Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99
D004000 11 Piece 6 Point Standard SAE Socket Set 5/32"-9/16" List Price: $32.46 $21.99 D004008 9 Piece 12 Point Standard Metric Socket Set 4-12 mm List Price: $25.65 $16.99 $77.99 D004005 25 Piece 6 Point
More informationREGIONAL MANAGER (VADODARA REGION)
Tenders Quotation are invited to conduct electric audit of branches in Vadodara Region, Gujarat State Dena Bank intends to conduct electrical audit in our all 74 branches including Regional Office, Vadodara,
More informationThree (3) New Ford Fusion Sedans Bid No Notice to Bidders
CITY OF SAN LEANDRO INVITATION FOR BIDS SUBMIT BID TO: City of San Leandro Purchasing Department 835 East 14th Street San Leandro, CA 94577 FOR FURTHER INFORMATION CONTACT: Julie Jenkins Purchasing Agent
More informationSupplying the Products Needed to Help Industry Move
Supplying the Products Needed to Help Industry Move F A B R I C A T O R S ENTERTAINMENT ROCK, SAND & GRAVEL MANUFACTURING MUNICIPALITIES Supply AGRICULTURE CONSTRUCTION PLANT MAINTENANCE Serving Proudly
More informationINVITATION TO BID PURCHASING DEPARTMENT P. O. BOX E. CENTRAL AVENUE THIRD FLOOR VALDOSTA, GEORGIA 31601
INVITATION TO BID PURCHASING DEPARTMENT P. O. BOX 1125 216 E. CENTRAL AVENUE THIRD FLOOR VALDOSTA, GEORGIA 31601 BID # 21-17-18 FOR: (1) One Ton Super Duty Crew Cab Truck with 8 Bed (F-350) OPENING DATE:
More informationANNE ARUNDEL COUNTY, MARYLAND Annapolis, Maryland ADDENDUM NO. 4 June 8, 2017
ANNE ARUNDEL COUNTY, MARYLAND Annapolis, Maryland ADDENDUM NO. 4 June 8, 2017 TO ALL BIDDERS: Please see the following for the above-mentioned IFB: 1. Q: The Bid Response Form shows a column for estimated
More informationOFFICE OF SUPERINTENDENT DELAWARE COMMUNITY SCHOOL CORPORATION 9750 N CR 200 East Muncie, IN Phone: Fax:
OFFICE OF SUPERINTENDENT DELAWARE COMMUNITY SCHOOL CORPORATION 9750 N CR 200 East Muncie, IN 47303 Phone: 765-284-5074 Fax: 765-284-5259 Board of Education Trent Fox, President John Adams, Vice-President
More informationENGINE MECHANICAL PREPARATION SST mm Socket Wrench for 12 Pointed Head Union Nut Wrench 12mm PARTIAL ENGINE ASSY(1ZZ FE)
SST 025 021E001 0901138121 12 mm Socket Wrench for 12 Pointed Head CYLINDER BLOCK(1ZZFE) 0902338200 Union Nut Wrench 12mm 0903200100 Oil Pan Seal Cutter 0920101055 Valve Guide Bushing Remover & Replacer
More informationTender documents for supply, erection & commissioning of Plante Type Battery to 2x210 MW IB Thermal Power Station.
ORISSA POWER GENERATION CORPORATION LIMITED IB THERMAL POWER STATION AT/P.O: BANHARPALI, DIST: JHARSUGUDA, PIN: 768234 (ORISSA), INDIA GRAM: IB THERMAL, TEL: 06645-222209/222210, FAX: 06645-222209/54/30
More informationFile No. EL/EE/NAD/Tech/1-13/2018/822 Dated: 29/08/2018 OFFICE OF THE EXECUTIVE ENGINEER NORTH ANDAMAN DIVISION ELECTRICITY DEPARTMENT DIGLIPUR
OFFICE OF THE EXECUTIVE ENGINEER NORTH ANDAMAN DIVISION ELECTRICITY DEPARTMENT DIGLIPUR Unique No.* Name of Work Name of Department Tender No.* Complete Mechanical works, Electrical works, Body works,
More informationOpen Tender Enquiry OUTSOURCING OF PHOTOCOPY WORK AT SCOOTERS INDIA LIMITED SINGLE BID SYSTEM. SCOOTERS INDIA LIMITED Page 1
Open Tender Enquiry OUTSOURCING OF PHOTOCOPY WORK AT SCOOTERS INDIA LIMITED SINGLE BID SYSTEM SCOOTERS INDIA LIMITED Page 1 THIS PAGE INTENTIONALLY LEFT BLANK SCOOTERS INDIA LIMITED Page 2 SCOOTERS INDIA
More informationAir Operated 1:1 Oil Ratio Pump OP-11
INSTRUCTION MANUAL Air Operated 1:1 Oil Ratio Pump OP-11 Congratulations on purchase of this World Class Air Operated Oil Ratio Pump! S1221, Rev C World-class Industrial Oil Dispensing pumps with guaranteed
More informationINVITATION FOR QUOTATION. TEQIP-III/2018/uceo/Shopping/48
INVITATION FOR QUOTATION TEQIP-III/2018/uceo/Shopping/48 29-Dec-2018 To, Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for the
More informationDepartment of Community Medicine
KASTURBA HEALTH SOCIETY'S MAHATMA GANDHI INSTITUTE OF MEDICAL SCIENCES, P.O. SEVAGRAM, WARDHA (DISTT.) MAHARASHTRA STATE - 442 102 Specifications Department of Community Medicine 1) Four Wheeler Vehicle
More informationCAREFULLY READ THESE GUIDELINES BEFORE STARTING!
INSTRUCTIONS 910-73060 *910-73060* Street Stock Roll Cage Kit Installation Guidelines CAREFULLY READ THESE GUIDELINES BEFORE STARTING! These are the basic guidelines for the installation of a roll cage
More informationBIDDERS SHOULD SUBMIT THE DOWNLOADED DOCUMENTS, DULY FILLED, STAMPED AND SIGNED, AS PER THE INSTRUCTIONS GIVEN HEREUNDER.
Taluka: Thasra Dist : Kheda Pin: 388 239 Telephone No. 02699-235 522 Fax No. 02699-235 607 CHIEF ENGINEER (C&O), GSECL,, INVITES TENDERS FROM INTERESTED BIDDERS, FOR SUPPLY OF ABOVE MATERIAL. THE DETAILS
More informationNATIONAL CENTER FOR COMBUSTION RESEARCH AND DEVELOPMENT (NCCRD) INDIAN INSTITUTE OF TECHNOLOGY MADRAS CHENNAI , INDIA
Ref. No. ICS/11-12/013/DSTX/TSUN Date: 1 Sep. 2015 Due date: 22 Sep. 2015 Item name: COMBUSTION ANALYSIS SYSTEM 1. Quotations are invited in duplicate for the items shown overleaf (in Annexure I). The
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS Part# 22-7810 Jeep JK/JKU ARB Mounting Kit 2007-2018.5 For the most up to date instructions please visit www.updownair.com www.updownair.com 833 226 4863 IMPORTANT INFORMATION
More informationAUDI UK - Mandatory Workshop Equipment List - From March 31st 2012
From arch 31st 2012 : Diagnostic machines -1 per 3 techs (excluding apprentices), VAS 5051B or VAS 5052A / VAS 6150 plus a VAS 6356 Test Box Wing Front Protectors, Steering Wheel Seat Covers - 1 per 1
More informationAttention Exhibitors Electrical Service Installation Notice
Attention Exhibitors Electrical Service Installation Notice Pre ordering your services can save you time and money. Once you re on site, please be sure to check in with the Javits electrical foreman when
More informationINVITATION FOR QUOTATION. TEQIP-II/2015/GJ1G02/Shopping/M-EE-09
INVITATION FOR QUOTATION TEQIP-II/2015/GJ1G02/Shopping/M-EE-09 02-Dec-2015 Sub: Invitation for Quotations for supply of Goods Dear Sir, 1. You are invited to submit your most competitive quotation for
More informationValid until December 31, 2017 K17/EN/XX/0 TOOL CATALOGUE
Valid until December 3, 207 K7/EN/XX/0 TOOL CATALOGUE Table of contents Contents from page Tool trolley and work bench with assortment Tool trolleys and work bench Accessories VIGOR 000 Work Bench /Tool
More informationX1033 Crusader Holidays Ltd. MAIN WORKSHOP
MAIN WORKSHOP 1: CRYPTON 630 Brake Tester 1600/4000Kg with N/S & O/S Indicators CH3 System Pressure CH2 RH Brake Effort CH1 LH Brake Effort complete with Rolling Road Rollers in Pit & Pendant Control 1:
More informationINDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur , Uttar Pradesh, India Centre for Lasers and Photonics
INDIAN INSTITUTE OF TECHNOLOGY KANPUR Kanpur 208016, Uttar Pradesh, India Centre for Lasers and Photonics Enquiry no.: CELP/RV/EQP/MHR/2017/1 Enquiry date: 23/04/2018 Closing date: 17/05/2018 Sealed quotations
More informationStandard program. Tool cases. ...convincing solutions. Hard top tool cases, Leather tool cases
Standard program Tool cases Hard top tool cases, Leather tool cases...convincing solutions Assortment boxes, wallets, tool cases Metal tool boxes 5 compartments, complete black powder coating Tool case
More informationOne (1) New Ford F-150 Regular Cab XL Bid No Notice to Bidders
CITY OF SAN LEANDRO INVITATION FOR BIDS SUBMIT BID TO: City of San Leandro Purchasing Department 835 East 14th Street San Leandro, CA 94577 FOR FURTHER INFORMATION CONTACT: Julie Jenkins Purchasing Agent
More informationList of Machinery and Equipment for M.M.V.trade (Annexure A)
List of Machinery and Equipment for M.M.V.trade (Annexure A) S.NO Name and description of article Quantity (in Nos) 1. Steel rule 15 cm inch and metric 21-No s 2. Steel rule 30 cm inch and metric -do-
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS --1075 North Ave. Sanger, CA 93657-3539 local: 559-875-0222 fax: 559-876-2259 toll free: 800-445-3767-- 2505 Lowering Spindle Assembly Installation Instructions ½ TON SILVERADO
More informationRequest for Quotation
United Nations Development Programme Birlashgan Millatlar Tashkiloti Rivojlanish Dasturi Request for Quotation Company name and adress: Date: 14.06.2012 Referemce: RFQ/028/12 (Procurement of compactor
More informationCORPORATE DETAILS 1 NAME OF FIRM PMT HEALTHCARE PRIVATE LIMITED
CORPORATE DETAILS 1 NAME OF FIRM PMT HEALTHCARE PRIVATE LIMITED 2 ADDRESS PLOT NO 2, OPP. ULTRATECH CEMENT FACTORY, NR. TELEPHONE EXCHANGE, NARODA GIDC ROAD, NARODA, AHMEDABAD 382330. GUJARAT, INDIA. 3
More information$1795 $2350 $540 $1650 $2700 $1200 BONUS! BONUS! More than 3,000 tools within our range! 295PC TOOL KIT 262PC TOOL KIT 7 DRAWER ROLL CABINET
262PC TOOL KIT 295PC TOOL KIT 9 Drawer Tool Box with BBS High Density Foam Inserts Spanner Sets Assorted Pliers Screwdriver Sets Punch & Chisel Sets Hex Key Set. Hacksaw, Hammer Plus Much More ATK79BB
More information18SP631 MBE 4000 Oil Gallery Threaded Plug Installation
18SP631 MBE 4000 Oil Gallery Threaded Plug Installation KIT DESCRIPTION A new service kit (P/N: 23536501) is now available to install two threaded plugs in place of cup plugs in the rear oil gallery on
More informationACCREDITATION FACILITY AUDIT CHECKLIST
ACCREDITATION FACILITY AUDIT CHECKLIST Institution Name: Date: Designated Trade: Automotive Service Technician AC #: Contact: Location: Course Duration: of weeks: of hours total: of hours per day: Instructor(s)
More informationTENDER DOCUMENT BHARAT HEAVY ELECTRICALS LIMITED, HEEP, RANIPUR, HARIDWAR
TENDER DOCUMENT Retrofitting of 10 MT hand operated overhead crane by Electric Wire Rope Hoisting Trolley NIT No.: WEX/SP/COMP/CRANE/11-12 Dated: 07.01.2012 BHARAT HEAVY ELECTRICALS LIMITED, HEEP, RANIPUR,
More informationToyota Prius Interior Light Upgrade
Toyota Prius 2012- Interior Light Upgrade Part Number 00016-00095 Accesory Code: IL2 Conflicts Kit Contents Item # Quantity Reqd. Description 1 1 Y Adapter 2 1 Wire harness 3 1 Hardware Kit 4 2 White Light
More informationNON-SPARKING SAFETY TOOLS FOR USE IN ALL ATEX ZONES
SAFETY TOOLS FOR USE IN ALL ATEX ZONES www.gruposiccis.com TOOLS CONTENTS Page INTRODUCTION... 2 HAMMERS, AXES... 3-4 WRENCHES AND ADJUSTABLE WRENCHES... 5-11 SCREWDRIVERS... 12 PUNCHES, PINS... 13 CHISELS,
More informationSupply & Installation of Latest Version NX CAD Academic Software (NX9)
ISO 9001:2008 TENDER FOR Supply & Installation of Latest Version NX CAD Academic Software (NX9) Tender Inquiry No. NSIC/NTSC/CAD/CAM/CNC/UG- NX Software/051/15-16 NSIC- Technical Services Centre (A Government
More informationINDIAN INSTITUTE OF TECHNOLOGY, KANPUR DEPARTMENT OF ELECTRICAL ENGINEERING
To, Ref No: IIT/ EE/SMART CITY/INVERTER AND BATTERY SET/2015/02 INVITATION FOR QUOTATIONS FOR SUPPLY OF THE FOLLOWING ITEMS REQUIRED FOR SMART CITY PILOT PROJECT AT IIT KANPUR S.No. Brief Description of
More informationINVITATION TO BID PURCHASING DEPARTMENT P. O. BOX E. CENTRAL AVENUE THIRD FLOOR VALDOSTA, GEORGIA 31601
INVITATION TO BID PURCHASING DEPARTMENT P. O. BOX 1125 216 E. CENTRAL AVENUE THIRD FLOOR VALDOSTA, GEORGIA 31601 BID # 24-17-18 FOR: (1) Ford T-250 Transit Van or comparable OPENING DATE: March 13, 2018
More informationTotal duration of course = 3 Months (12 weeks) Total training hours = 400 hrs.
1 TRAINING OBJECTIVES: In order to reduce the unemployment and poverty in the society, the curriculum is designed to impart the technical knowledge and skill to those who are literate and.can not do the
More informationINVITATION TO BID FUEL PRODUCTS
INVITATION TO BID FUEL PRODUCTS Notice is hereby given that the Aberdeen School District is accepting fuel bids and propane bids for the following: 1. Regular, unleaded and diesel fuels for district buses
More informationMARCH APRIL MAY 2007
MARCH APRIL MAY 27 ON SALE 1/3/6 UNTIL 31/5/6 OR UNTIL SOLD GARDEN CART 3 Kg CAPACITY 12 X 6 X 245mm 2 PIECE HANDLE ATTACHS TO A RIDE ON MOWER 13 PNEUMATIC WHEELS AIRLESS SPRAY GUN 1 LT/65W/24VOLT SPRAYS
More informationREQUEST FOR QUOTATION (RFQ)
AGA KHAN TRUST FOR CULTUR AFGHANISTAN (AKTC-A) RQUST FOR QUOTATION (RFQ) ( Purchase & Supply Of Telescopic Lift) RQUSTR INFORMATION Issued Department: Procurement - ngineering Date: Total Amount with Tax
More information