920i. FlexWeigh Systems. Manufacturer-Approved DIRECT REPLACEMENT FOR FLEXWEIGH S DWM-IV
|
|
|
- Monica Townsend
- 6 years ago
- Views:
Transcription
1 920i FlexWeigh Systems Fillers/Batchers Wallmount stainless steel enclosure Application program 101, 102, 103, 104, 201, 202 Front panel switches E-Stop, Reset/Resume, Start Softkeys for presets, CN#, ID#, formula#, totals Accumulating subtotal & total registers Transmitted audit trail Digital I/O Board Relay rack and SSR relay outputs APPROVALS specifications Standard Switches 101/103/ E-Stop mushroom X X X X Reset/resume X X X X Start X X X X Discharge - X - X outputs Fast fill** X X X X X X Slow fill*** X X X X X X Fill complete* Opt Opt X X Opt Opt Zero tolerance Opt Opt - - Opt Opt Discharge - X X Refill - - X Refill complete - - Opt Slow cycle - - Opt X - - * Dispense for 103 and 104 ** Fast Fill Ingredient 1 201/202 *** Fast Fill Ingredient 2 201/ Basic Filler Place an empty container on the scale. Automatically fill the container to a preset weight. Remove the container from the scale. Replace it on the scale with an empty and repeat the process. 102 Automatic Fill, Automatic Discharge Place an empty container under the scale. Automatically fill the scale to a preset weight. Discharge the scale into the container. Remove the container from under the scale. Replace it under the scale with another empty container and repeat the process. 103 Loss-In-Weight Filler Dispense preset net weight quantities from the scale until either low level or less-than-preset gross weight is achieved. Then refill to high level. 104 Loss-In-Weight Filler Product supply containers are placed on the scale. Net weight quantities are dispensed from the containers until empty. When containers empty in the middle of a dispense cycle, the cycle is paused and allowed to resume where it left off when the empty containers are replaced on the scale with filled ones. 201 Four Ingredient Dual Speed or Eight Ingredient Single Speed Batcher Place empty container on scale, automatically fill multiple ingredients in a sequential order to preset formula weights. Remove the container, replace with empty and repeat 202 Four Ingredient Dual Speed or Eight Ingredient Single Speed With Discharge Fill tank or hopper with multiple ingredients in a sequential order then empty into a vessel below. 374 An ISO 9001 Registered Company 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.
2 920i FlexWeigh Systems Fillers/Batchers Part # Description EST. SHIP weight price i FlexWeigh Systems lb Consult i FlexWeigh Systems lb Consult i FlexWeigh Systems lb Consult i FlexWeigh Systems lb Consult 920i FlexWeigh Systems lb Consult 920i FlexWeigh Systems lb Consult Relays channel relay rack (4 slots) Consult channel output relay, VAC at 2A Consult channel output relay, VAC at 2A Consult Optional Switches Options/Accessories PART # DESCRIPTION PRICE i FlexWeigh Systems 101 manual Consult i FlexWeigh Systems 102 manual Consult i FlexWeigh Systems 103 manual Consult i FlexWeigh Systems 104 manual Consult 920i FlexWeigh Systems 201/202 Consult Switch PART # Legend PART # / Selector 3 position Manual / Off / Auto X X X X X Manual Ingredient Select X X Push-button Fill X X X X Discharge X X Dispense X Refill X Maintained/Off/Spring Return Fill On/-/Jog X X X X Fill Fast/-/Slow X X X X Discharge On/-/Jog X X Discharge Fast/-/Slow X X Dispense On/-/Jog X Dispense Fast/-/Slow X Refill On/-/Jog X Manual Feed X X Optional Front Panel Lights Lamp Legend 101/ Ready Green X X X Fill Complete Red X X X Filling Amber X Filling Fast Amber X Filling Slow Amber X Discharging Blue X X X Discharging Fast Blue X Discharging Slow Blue X Dispensing Amber X X Dispensing Fast Amber X X Dispensing Slow Amber X X Dispensing Complete Red X X Refilling Blue X Refill Complete Red X Low Supply Red X X Fill Time Alarm Red X X Feeding (1-4) Amber X X An ISO 9001 Registered Company 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices. 375
3 920i FlexWeigh Systems Bulkweighers Wall mount stainless steel enclosure Application program 107,108,109 Front panel switches E-Stop, Start/Resume, End Cycle, Ship/Recv (only 109) Softkeys for presets, ID1 and ID2 Accumulating weight streaming Fill and discharge sequence controls Fill and discharge gate monitoring Printer online checking Weigh and surge hopper overfill monitoring Transmitted audit trail Digital I/O Board Relay rack and SSR relay outputs options Pilot lights for error indication Manual override switches APPROVALS specifications Standard Switches E-Stop mushroom X X X Start/resume X X X End Cycle X X X Ship/Recv - - X outputs Fill Gate closed* X X X Discharge Gate closed* X X X Surge hopper not full* X X X Weigh hopper not full* X X X Printer online* X X X Slow cycle alarm OPT OPT OPT Gate alarm OPT OPT OPT Scale over fill alarm OPT OPT OPT Lower surge alarm OPT OPT OPT Printer alarm OPT OPT OPT Open fill gate X X X Open discharge gate X X X * Denotes input 107 Shipping Bulkweigher The 920i FlexWeigh 107 is designed for basic shipping-mode bulkweighing applications. In shipping mode, a scale is loaded and discharged repetitively until the accumulated weight meets the overall target value. 108 Receiving Bulkweigher The 920i FlexWeigh 108 is designed for basic receiving mode bulkweighing applications. In receiving mode, a scale is loaded and discharged until there is no more product to receive. To end the cycle the End Cycle button is pressed. 109 Ship/Receive Bulkweigher The 920i FlexWeigh 109 allows the user to select which mode of operation to use. This is done with a three-position locking key switch. 376 An ISO 9001 Registered Company 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.
4 920i FlexWeigh Systems Bulkweighers Part # Description EST. SHIP weight price Consult 920i FlexWeigh Systems lb Consult Consult 920i FlexWeigh Systems lb Consult Consult 920i FlexWeigh Systems lb Consult Options/Accessories PART # DESCRIPTION PRICE i FlexWeigh Systems 107/108/109 manual Consult Optional Switches Type Manual / Off / Auto 3 position key selector X X X Man Fill On/-/Jog X X Maintained/Off/Spring Return Man Disch On/-/Jog X X Optional Front Panel Lights Lamp 101/ Slow Cycle Red X X X Gate Fault Red X X X Scale Overfill Red X X X Surge Backup Red X X X Printer Red X X X An ISO 9001 Registered Company 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices. 377
5 920i FlexWeigh Systems Flow Rate Controllers Wall mount stainless steel enclosure Application program 105, 106, 205 Front panel switches E-Stop, Reset/Resume, Start Softkeys for presets, CN#, ID#, formula#, totals Accumulating subtotal & total registers Transmitted audit trail Digital I/O Board Relay rack and SSR relay outputs APPROVALS specifications Standard Switches E-Stop mushroom X X X Reset/resume X X X Start X X X Discharge - - X outputs Fast fill** X - X Slow fill*** X - X Fill complete* X - X Zero tolerance Opt - Opt Discharge X X X Refill - X - Refill complete - Opt -- Slow cycle Opt Opt Opt * Dispense for 105 and 106 ** Fast Fill Ingredient *** Fast Fill Ingredient Basic Flow-Rate Controller Dispense preset net weight quantities at preset flow rate values. 106 Loss-In-Weight with Flow-Rate Control and Automatic Refill Dispense preset net weigh quantities at preset flow rate values with automatic refill when gross weight drops below threshold. 205 Eight Ingredient Batcher with Flow-Rate Control Discharge Batch up to eight ingredients in sequential order to preset formula weights. Discharge to net quantities via preset flow- rate control. 378 An ISO 9001 Registered Company 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.
6 920i FlexWeigh Systems Flow Rate Controllers Part # Description EST. SHIP weight price Consult 920i FlexWeigh Systems lb Consult Consult 920i FlexWeigh Systems lb Consult Consult 920i FlexWeigh Systems lb Consult Relays channel relay rack (4 slots) Consult channel output relay, VAC at 2A Consult channel output relay, VAC at 2A Consult Options/Accessories PART # DESCRIPTION PRICE Consult 920i FlexWeigh Systems 105 manual Consult Consult 920i FlexWeigh Systems 106 manual Consult Consult 920i FlexWeigh Systems 205 manual Consult An ISO 9001 Registered Company 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices. 379
7 920i FlexWeigh Systems Hand Batching Stainless deep universal mount enclosure Application program 211 Soft keys for presets ID#, Formulas, Totals Accumulating Subtotal and Total Registers Switch for manual confirmation 20 ingredient database 100 formula database Audit treail data output Ingredient usage totals 211 Manual Batching System Prompts the user through manual weight additions based on a pre-entered formula Part # Description EST. SHIP weight price 920i Flexweigh Systems lb Consult 380 An ISO 9001 Registered Company 2014 Rice Lake Weighing Systems 01/14 Prices and specifications subject to change without notice. Visit ricelake.com for current prices.
CLS-420 Wired Version Cargo Lift Scale
CLS-420 Wired Version Cargo Lift Scale APPROVALS Standard Features Scale Carriage Compatible with Class II or III forklift carriage types New industry standard out of level NTEP tolerance at 7 degrees
CLS-420 Wired Version Cargo Lift Scale
CLS-420 Wired Version Cargo Lift Scale APPROVALS Standard Features Scale Carriage Compatible with Class II or III forklift carriage types New industry standard out of level NTEP tolerance at 7 degrees
CLS-920i Wired Version
Scales CLS-920i Wired Version Cargo Lift Scale APPROVALS Standard Features Scale Carriage Compatible with Class II or III forklift carriage types New industry standard out of level NTEP tolerance at 7
CD100 Series. Operators Manual SINGLE COLUMN CARD DISPENSER
CD100 Series SINGLE COLUMN CARD DISPENSER Operators Manual Contents 1 Specifications...1 2 Installation...2 2.1 Unpacking and inspection...2 2.2 Installation...2 2.3 Electrical Connections...2 2.4 Initial
LOSS-OF-WEIGHT _ Systems Installation and Operating Instructions
Contents: GENERAL DESCRIPTION INSTALLATION MAINTENANCE DISASSEMBLY ASSEMBLY ENGINEERING DATA Load Cells Weigh Instruments Measuring Accuracy BATCH CONTROL CONTINUOUS CONTROL GENERAL DESCRIPTION When a
3200NT Timer Service Manual
Service Manual Valve Serial Number Valve Position 1-LEAd 2-LAg 3-LAg 4-LAg IMPORTANT: Fill in pertinent information on page 3 for future reference. Table of Contents Job Specifications Sheet.....................................................................
TURBO Continuous Feed Mobile Fiber Dispenser System
Installation, Operation, and Maintenance Instructions version1.2 17JUL12 Page 1 The TURBO C Mobile Fiber Dispenser is a self-contained, continuous feed, loss-in-weight fiber dispensing system. It is primarily
On-board Weighing. Table of Contents. Precision Loads. Semi Trailer Kits... O-2 Precision Loads. Straight Truck Kits... O-4 Precision Loads
Table of Contents Semi Trailer Kits... O-2 Straight Truck Kits... O-4 Components... O-5 - Tractor/Trailer & Half Systems Semi Trailer Kits Complete Tractor/Trailer Air-Ride Kits Single transducer kit for
Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:
SECTION 6 Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION: 70 Application: IDEM Universal Gate Boxes (UGB-KLT) provide high level RFID coded interlocking and machine control
TRITON ERROR CODES ERROR CODE MODEL SERIES DESCRIPTION RESOLUTION
0 8100, 9100, 9600, 9610, 9615, 9640, No errors 9650, 9700, 9710, 9705, 9750, RL5000 (SDD),RL5000 (TDM), RT2000, 9800, MAKO, SuperScrip 1 9615 Unsolicited note channel 1 2 9615 Unsolicited note channel
VOLUMETRIC BLENDING SYSTEM OPERATION MANUAL
VOLUMETRIC BLENDING SYSTEM OPERATION MANUAL 12285 E. MAIN ST. MARSHALL, IL 62441 PHONE: 217-826-6352 FAX: 217-826-8551 WEB SITE: www.yargus.com 1 OPENING SCREEN The OPENING SCREEN is the screen that the
Sentinel Enteral Feeding Pump. Model: S-1000-SI. Operating Manual
Sentinel Enteral Feeding Pump Model: S-1000-SI Operating Manual CONTENTS 1. Introduction.. 2 2. Control Panel 5 3. Operating Instructions.. 6 4. Indicators and Alarms.. 9 5. Maintenance.. 10 6. Troubleshooting
Protection Systems. 3-Way Directional Ball Valve P/Ns: X and X. A UTC Fire & Security Company FEATURES
Effective: April 2007 Fenwal Phoenix 3-Way Directional Ball Valve P/Ns: 93-118325-00X and 93-118327-00X TM R Protection ystems A UTC Fire & ecurity Company F-93-120 FEATURE For use with Fenwal Phoenix
MODEL 10LH SPECIFICATION
MODEL 10LH SPECIFICATION 1.0 General Specifications There will be furnished one (1) only Grind Hog TM Model 10LH Comminutor as manufactured by G.E.T. Industries, Inc. Rotation shall be in a clockwise (standard)
Protection Systems. 3-Way Directional Valve P/N: XX-00X. A UTC Fire & Security Company FEATURES
Effective: Nov. 2010 Fenwal Phoenix Directional Valve P/N: 93-2200XX-00X TM R Protection ystems A UTC Fire & ecurity Company F-93-121 FEATURE For use with Fenwal Phoenix ystems Cost-Effective Option for
PART NO CP-DOOR FRONT PANEL WINDOW PART NO CP-DOOR FRONT PANEL SECOND WINDOW PART NO CP-DOOR LOCK PART NO. 5026
5010 CP-DOOR FRONT PANEL WINDOW 5015 CP-DOOR FRONT PANEL SECOND WINDOW 5025 CP-DOOR LOCK 5026 CP-DOOR LOCKING CYLINDER 5027 CP MOUNTING BRACKET (PACKET OF 4) 5030 OBSOLETE CP-DOOR PUSH-BUTTON GREEN (HEAD
USER MANUAL FOR AUTOMATIC A/C CHARGING STATIONS
USER MANUAL FOR AUTOMATIC A/C CHARGING STATIONS Nano Nano 2 Nano Hybrid ITECH Creative Technology INDEX 1 INTRODUCTION... 2 1.1 Safety instructions... 2 2 EQUIPMENT... 2 3 USE... 4 3.1 Control panel...
Available Hydra-Handler Options
Available Hydra-Handler Options Centurion: Lift, Travel, Proportional Control PLC controlled hydraulic valves which allow for faster lift, smoother start and stop, easier feathering of the controls, and
Power Switching Principles
Power Switching Principles What Is An SCR Power Controller? An SCR, or thyristor, is a semiconductor device which switches AC power ON and OFF. It is used to control the electrical power delivered to heating
PIPING TO HAZARD PIPING TO HAZARD AGENT SOURCE AGENT SOURCE TOP VIEW TOP VIEW
Kidde Engineered Fire uppression ystem Designed for use with 3M Novec 1230 Fire Protection Fluid 3-Way Directional Ball Valve Data heet Effective:March 2005 K-45-9070 FEATURE For use with Kidde Engineered
Flo-Way. Measure Granular or Powdered Material. Stand Alone or Connect to Other Devices for Blending. Used by Successful Producers World-Wide
Flo-Way R Solids Impact Flow Meter Measure Granular or Powdered Material Stand Alone or Connect to Other Devices for Blending Used by Successful Producers World-Wide Visit our website: www.beltwayscales.com
INSTALLATION INSTRUCTIONS FOR SYMCOM'S MODEL 777-HVR-SP ELECTRONIC OVERLOAD RELAY
CONNECTIONS INSTALLATION INSTRUCTIONS FOR SYMCOM'S MODEL 777-HVR-SP ELECTRONIC OVERLOAD RELAY BE SURE POWER IS DISCONNECTED PRIOR TO INSTALLATION!! FOLLOW NATIONAL, STATE AND LOCAL CODES! READ THESE INSTRUCTIONS
COMPACTOR & RAM ASSEMBLY
P1 P2 COMPACTOR & RAM ASSEMBLY FOR MODELS - ALL 5/02 Item Part Number Part Description Qty. 1 64--129 1--1/2 STD. Flat Washer 10 2 9121--1--8 Cylinder Pin, Base 1 3 60--608 1/4 DIA. x 2--1/2 Roll Pin --
PRESSURE GOVERNOR, ENGINE MONITORING, AND MASTER PRESSURE DISPLAY MODEL DDA100
PRESSURE GOVERNOR, ENGINE MONITORING, AND MASTER PRESSURE DISPLAY MODEL DDA100 1 CONTENTS Table of Contents CONTENTS... 2 INTRODUCTION... 4 Overview... 4 Features... 4 GENERAL DESCRIPTION... 5 2 List of
Model 7400 OPERATOR MANUAL
Model 7400 OPERATOR MANUAL DORAN SCALES, INC. 1315 PARAMOUNT PKWY. BATAVIA, IL 60510 1-800-262-6844 FAX: (630) 879-0073 http://www.doranscales.com MANUAL REVISION: 1.0 MAN0198 10/3/2005 INTRODUCTION Introducing
System Background and Operation
Pty Limited 1/48 Racecourse Road RUTHERFORD NSW 2320 Telephone: (02) 4932 0111 Facsimile: (02) 4932 0222 E-mail:hyden@hydeneng.com.au ABN: 17 129 010 902 ENVIROSPRAY Manual Manual Number: 06500976A Manual
Iron Gate Feed Pump Manual
Iron Gate Feed Pump Manual Installation and Operating Instructions Iron Gate Iron Filter System Manufactured by: R.E Prescott Co., Inc. 10 Railroad Avenue Exeter, New Hampshire 03833 Phone: (603) 772 4321
Indicating. 1. General. A. Fuel Quantity. B. Fuel Flow
Indicating GENERAL 28-40: INDICATING. General A. Fuel Quantity A dual reading fuel quantity indicator is displayed in the Fuel Qty block of the ENGINE page along calibrated vertical bars. The fuel quantity
AIR CLEANERS Model MC 3000 OWNER S MANUAL CAUTION Read complete instructions before operating. Please file for future reference.
AIR CLEANERS Model MC 3000 OWNER S MANUAL CAUTION Read complete instructions before operating. Please file for future reference. MODEL MC 3000 SPECIFICATION Input Volts: 208-230/430 VAC, 60Hz, 3 Phase
Overview. References TEST SPECIFICATION FORT WORTH, TEXAS TROTTER CONTROLS REPORT X TS-0005 A MODEL ORDER TITLE BY CHK D. Tests
Rev A, 5/26/2009 1 26 Overview This document describes the use of the Maintenance System. This test is a built in diagnostic feature of the GEN II System and provides maintenance personnel with a diagnostic
Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION:
SECTION 6 Universal Gate Box with Safety Interlocking TYPE: UGB-KLT FEATURES & APPLICATION: 78 Application: IDEM Universal Gate Boxes (UGB-KLT) provide high level RFID coded interlocking and machine control
TRAVEL CORDSET AND WALL STATION TEST REPORT
GENERAL MOTORS TRAVEL CORDSET AND WALL STATION TEST REPORT REVISION 4 EVSE Model: Click here to enter text. Serial Number: Click here to enter text. Test Engineer: Click here to enter text. Date: Click
Powerterm L120C Single Output PSU/Battery Chargers Model C2199A-1 (12V/8A) or Model C2199A-2 (24V/6A)
A Complete solution for small battery-backed dc instrument power systems. DATASHEET Supply 12Vdc 8A or 24Vdc 6A loads Ideal for RTU s, dataloggers, remote field instrumentation, alarm systems, etc. where
FT-10 Network Digital I/O Module Kits and
Instruction Sheet 10-2004 FT-10 Network Digital I/O Module Kits 541 0771 and 541 0772 PURPOSE OF KIT The Digital I/O Module (DIM) makes provisions for a group of relay contact outputs and discrete inputs
BD SERIES BLENDERS Batch Weigh Blenders
Temperature Control Process Cooling Material Handling Size Reduction BD SERIES BLENDERS Batch Weigh Blenders Compact Innovative Capable Heavy-duty modular construction with exclusive diamond design slide
SV-1200 Feeder. Manual
SV-1200 Feeder Manual 2018 Streamfeeder - BW Integrated Systems. All rights reserved. No part of this publication may be reproduced, photocopied, stored on a retrieval system, or transmitted without the
Water and Chemical Batching. Precision Measurement for Ready-Mix and Concrete Batch Plants. Concrete Meter Overview
Water and Chemical Batching. Precision Measurement for Ready-Mix and Concrete Batch Plants. Concrete Meter Overview Every drop counts. Measure and precisely control the amount of water and chemical additives
SYMBOL LEGEND DANGER WARNING NOTE THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN
SYMBOL LEGEND DANGER THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN WARNING THIS WARNS THAT MATERIALS MAY BE DAMAGED IF APPROPRIATE PRECAUTIONS ARE NOT
3200ET TIMER. Service Manual. IMPORTANT: Fill in pertinent information on page 2 for future reference.
3200ET TIMER Service Manual IMPORTANT: Fill in pertinent information on page 2 for future reference. Installation And Start-Up Procedures Timer Programming Water Hardness System Capacity Regeneration Time
VC-4820 Programmable DC-DC Converter with Battery Charger function USER'S MANUAL
1. INTRODUCTION VC-4820 Programmable DC-DC Converter with Battery Charger function USER'S MANUAL This MCU controlled Step Down DC-DC Converter has a digitally adjustable output in 0.2V increments. This
Discrete Control Logic. 1. Pneumatic circuits. - Low forces - Discrete, fixed travel distances - Rotational or reciprocating motion
Discrete Control Logic 1. Pneumatic circuits - Low forces - Discrete, fixed travel distances - Rotational or reciprocating motion Main components: compressor, valves, cylinders Pneumatic components: cylinders
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS FOR MODELS - ALL 8/01 Item PartNumber Part Description Qty. 1 9017--104--35 Stop 2 2 62--108 3/8NC x 1 GD5 Cap Screw 2 3 62--425 3/8NC x 3/4 GD8 Hex Washer Thread Forming Screw 8
Model FMBC3000 Series Operating Instructions. Drum Pump Flow Meter
Model FMBC3000 Series Operating Instructions Drum Pump Flow Meter Table of Contents Safety... 1 Introduction... 1 Specificatons... 1 Features... 1 Section 1 - Installation... 2 Section 2 - Operation...
VS1PFB 230V, 50/60 Hz, 3-Phase
Farm Duty Unit Handling Brake 200 & 575 Volt Pump and Fan Bypass AC Drive 7.5 thru 40 Hp 7.5 thru 125 Hp & Controls 230 VAC 460 VAC 3 Phase - 50/60 Hz 3 Phase - 50/60 Hz Applications: Pump and Fan AC Drive
MANUAL Operating Manual
1500SuperSax Super SILO Sack Silo MANUAL Operating Manual Silo Specifications Silo Weight (empty) 4,500 Lbs. Silo Size 170 Cubic Feet Silo Capacity 15,000 Lbs. (7 1/2 tons) Dimensions 9 H X 8-6 W X 14
Models CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - 13C MAY FORM Page. Section - Q3
Models 94422 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" MAY - 2004 FORM 403467 Section - Q3 Page - 13C 9.00" (229 mm) 13.75" (350 mm) 0.35" (9mm) Mounting Holes 4.76" (121 mm) 9.84" (250 mm) Do not use
Loadcell Tension Control
CORTEX INDUSTRIAL SYSTEM CONTROLLER Loadcell Tension Control Instruction Manual Model CORTEX-D00 Table of Contents 1. General Description... 2 2. Specifications... 3 2.1 Electrical... 3 2.2 Physical...
Model CHASSIS LUBE ELECTRIC GREASE PUMP Series "C"
Model 94222 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" Indicates change MAY - 2004 FORM 403466 Section - Q3 Page - 12B 7.75" (197 mm) 12.6" (321 mm) 0.35" (9 mm) Mounting Holes 4.85" (123 mm) 8.85" (225
READ ME! IMPORTANT WARNING! ENG. Auxiliary 80l Fuel Tank Toyota Hilux DC 2005-Current
Auxiliary 80l Fuel Tank Toyota Hilux DC 2005-Current ENG FTTH011 READ ME! Thank you for purchasing a Front Runner Fual Tank. Before you start, take a moment to familiarize yourself with the Fitting Instructions
This specification describes the minimum requirements for a hoist maintenance safeguard (HMS) system for mine hoists.
/2.0 PURPOSE This specification describes the minimum requirements for a hoist maintenance safeguard (HMS) system for mine hoists. The HMS system is a means of preventing hoist operation or movement to
Models CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - Q3. MAY FORM Section
Models 94822 CHASSIS LUBE ELECTRIC GREASE PUMP Series "C" - Q3 MAY - 2004 FORM 403468 Section Page - 14B 13.00" (330 mm) 17.72" (450 mm).35" (9 mm) Mounting Holes 4.72" (120 mm) 9.84" (250 mm) Figure 1
Syntron Pneumatic Vibrators
Pneumatic Vibrators Syntron Pneumatic Vibrators Syntron Material Handling offers two types of Syntron Pneumatic Vibrators turbine and piston. Turbine models feature rotary action designed to keep noise
LINEAR ACTUATOR MODULE Page 5-1. Table Of Contents
LINEAR ACTUATOR MODULE Page 5-1 Table Of Contents Section Description Page # 5. Linear Actuator Module... 5-2 5.1 Description... 5-2 5.2 Operation... 5-2 5.2.1 Sensors... 5-3 5.2.1.1 Linear Sensor... 5-3
TS-E TURBO STEAM ELECTRIC COUNTERTOP CONVECTION STEAMER PARTS AND SERVICE MANUAL
TS-E TURBO STEAM ELECTRIC COUNTERTOP CONVECTION STEAMER PARTS AND SERVICE MANUAL EFFECTIVE JUNE 12, 2017 Superseding All Previous Parts Lists. The Company reserves the right to make substitution in the
UPS. MEGALINE UPS MODULAR SINGLE-PHASE from 1250 to VA THE GLOBAL SPECIALIST IN ELECTRAL AND DIGITAL BUILDING INFRASTRUCTURES
UPS MEGALINE UPS MODULAR SINGLE-PHASE from 1250 to 10000 THE GLOBAL SPECIALIST IN ELECTRAL AND DIGITAL BUILDING INFRASTRUCTURES Modular UPS redundant and upgradable up to 10k with perfomance and functions
Installation and Operations Manual
Installation and Operations Manual SEI 150/48-SEL-XXX DC-UPS SEI Incorporated 5115 Pegasus Court, Suite Q Frederick, Md 21704 Phone 301-694-9601 Fax 301-694-9608 Email Info@seipower.com Web http://www.seipower.com
TECHNICAL MANUAL OPERATION INSTRUCTIONS CONCRETE - MOBILE MIXER BODY M919, MODEL 8CM-24/F NSN
TECHNICAL MANUAL OPERATION INSTRUCTIONS CONCRETE - MOBILE MIXER BODY M919, MODEL 8CM-24/F NSN 3895-01-028-4391 DAFFIN MOBILE PRODUCTS DIVISION OF BARBER-GREENE COMPANY (MANUAL PREPARED BY AM GENERAL CORPORATION)
GWM GROSS WEIGH BAGGING SCALE
GWM GROSS WEIGH BAGGING SCALE The GWM Gross Weigh Mechanical Bagging Scale is designed for handling 20 lb. (10 kg.) through 110 lb. (50 kg.) weighments at a rate of 5-6 bags per minute and with an accuracy
INSTALLATION, OPERATION & MAINTENANCE SERIES ABC11B-120-XX BATTERY CHARGERS
MANUAL NUMBER: 64073 REV: 2 DATE: October 3, 2006 INSTALLATION, OPERATION & MAINTENANCE SERIES ABC11B-120-XX BATTERY CHARGERS AMERICAN BATTERY CHARGING, INC. P.O. BOX 17040 28 MAPLE AVENUE SMITHFIELD,
SAC SERIES CONTENTS TRIPLE-INTERVAL HIGH PRECISION COUNTING SCALE OPERATION MANUAL 1. INSTALLATION 2. SPECIFICATIONS
CONTENTS SAC SERIES TRIPLE-INTERVAL HIGH PRECISION COUNTING SCALE 1. INSTALLATION 2. SPECIFICATIONS 2.1 GENERAL SPECIFICATIONS 2.2 MINIMUM PIECES, WEIGHT APPLIED & SAMPLE SIZE WEIGHT SPECIFICATIONS OPERATION
Document: PRODSPEC-140 Revision: G DCN No Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger
Document: PRODSPEC-140 Revision: G DCN No. 106512 Date: October 1, 2014 Product: 10-amp EnerGenius NRG Battery Charger 1. GENERAL DESCRIPTION 1.1 General Description Fully regulated, constant voltage,
CENTRIFEEDER ELECTRONICS
CENTRIFEEDER ELECTRONICS FOR USE WITH CENTRIFEEDER with Integrated Vibratory Control REV 08/13 ADDENDUM VERSION 6.22 SOFTWARE Copyright 2011 Eastern Instrument Laboratories, Inc. All Rights Reserved. TABLE
INDUSTRIAL GRADE WATER SOFTENERS LWTS INDUSTRIAL SERIES
INDUSTRIAL GRADE WATER SOFTENERS LWTS INDUSTRIAL SERIES 150,000 TO 900,000 GRAIN CAPACITY (Single, Twin Alternating, Triple or Quadruple Demand Systems) 1 P age Industrial Performance and Proven Reliability
Silo Specifications. Silo Description
1500 SuperSax 1500 SuperSax Silo Silo Operating Manual Silo Specifications Silo Weight (empty) 4,500 Lbs. Silo Size 170 Cubic Feet Silo Capacity 15,000 Lbs. (7 1/2 tons) Dimensions 9 H X 8-6 W X 14 L Discharge
Working Dimensions. Closed Dimensions. Length 1.62 m Width 0.78 m Height 1.85 m Weight 342 kgs. Power Source
Working Dimensions Maximum Working Height 5.10 m Maximum Platform Height 3.10 m Platform Dimensions 1.52 x 0.75 m Working Footprint 1.62 x 0.78 m Safe Working Load 250 kgs No. Persons 1 Maximum Manual
Contact Details: Mail Id:
Product Brochure Contact Details: +91 8308839755 Mail Id: savikenterprises@yahoo.co.in Contents Solid State Relay... - 3 - Thyristor Heater/Power Controllers... - 6 - Emergency Alarm System... - 9 - Thyristor
Quick Setup Guide for IntelliAg Model YP40 20 Air Pro
STEP 1: Pre-Programming Preparation: The Quick Guide assumes the Virtual Terminal, Master Switch, Working Set Master, Working Set Member, and all sensors have been connected and properly installed. Reference
RAPIDMIX 400CW. Length of Machine (19.5m) Length when erected Width of Machine 9-10 (3.00 m) Width Same
Machinery Manufacturers to the Concrete Industry RAPIDMIX 400CW The Rapidmix 400CW has been designed to be totally mobile and completely self-contained with its own power source. It is also completely
OPERATIONAL MANUAL EMBC-8025 INTELLIGENT BATTERY CHARGER. Version 1.5
OPERATIONAL MANUAL EMBC-8025 INTELLIGENT BATTERY CHARGER Version 1.5 1 Product Overview EMBC-8025 is an intelligent switching mode battery charger with float maintenance. It is designed to offer maximum
Operating and Service Manual
Operating and Service Manual TELFAFILL Split Wall (SW) Version 1.5b Operating and Service Manual AB TELFA, Box 12030, S-402 41 GÖTEBORG, SWEDEN Tel. +46-31-775 19 50 Fax +46-31-42 61 98 info@telfa.se www.telfa.se
Model 8000XL OPERATOR MANUAL
Model 8000XL OPERATOR MANUAL DORAN SCALES, INC. 1315 PARAMOUNT PKWY. BATAVIA, IL 60510 1-800-262-6844 FAX: (630) 879-0073 http://www.doranscales.com MANUAL REVISION: 1.0 MAN0191 10/3/2005 INTRODUCTION
Octave Water Meter Installation Manual
Octave Water Meter Installation Manual 1.0 Notes For proper flow measurements, the OCTAVE s measuring tube should be completely full at all times. Non-wetted sensors show loss of signal. Though this will
3600 PRINTER APPLICATOR MAINTENANCE & SERVICE MANUAL (REVISION b5.x)
1318 QUAKER CIRCLE PO BOX 589 SALEM, OHIO 44460 PHONE: 330-332-1800 FAX: 330-332-2144 www.ctmlabelingsystems.com Designers And Manufacturers Of Pressure Sensitive Labeling Equipment And Custom Product
PREPOINT CHAMFER GRINDER MODEL Section 1. Set up and operation
PREPOINT CHAMFER GRINDER MODEL 6-94 Set up and operation Section 1 1. Installation of the proper size collet. This machine used a 5-C style collet. This can be changed by loosening of he set screw located
RAPIDMIX 600C CHASSIS
Machinery Manufacturers to the Concrete Industry RAPIDMIX 600C The Rapid Mix 600C has been designed to be totally mobile and completely self-contained with its own power source. It is also completely self
Hazardous Factory Sealed Control Devices
Hazardous Factory Sealed Control Devices Description Page No. Application/Selection 428, 429 Dimensions 40 Manual Motor Starting Switches & Enclosures EDS Series 440, 44 Pilot Lights EFS Series 45 Pilot
ANSI Z50.1. Safety Standards
ANSI Z50.1. Safety Standards 5. Dry Ingredient Handling Equipment 5.1 General Requirements 5.1.1 Whenever a dry ingredient handling system is of such size that the beginning of its operation is remote
Application Engineering Europe
Date of last update: Feb-12 Ref: D7.8.4/0112-0212/E Application Engineering Europe CORESENSE DIAGNOSTICS FOR STREAM REFRIGERATION COMPRESSORS 1/17 1 Introduction CoreSense is an ingredient brand name for
CONTENTS TABLE OF CONTENTS... 1 INTRODUCTION... 2 SEC 1 - SPECIFICATIONS... 3 SEC 2 - DESCRIPTION... 5 SEC 3 - OPERATING INSTRUCTIONS...
CONTENTS SUBJECT PAGE TABLE OF CONTENTS... 1 INTRODUCTION... 2 SEC 1 - SPECIFICATIONS... 3 SEC 2 - DESCRIPTION... 5 SEC 3 - OPERATING INSTRUCTIONS... 8 SEC 4 - BATTERY CHARGING NOTES... 9 SEC 5 - VERIFICATION
UL 489/CSA C22.2 No. 5 Listed C60 Circuit Breakers 1.22 [31.1] 1.77 [45.1] 4.86 [123.4] Clearance 1.77 [45]
![UL 489/CSA C22.2 No. 5 Listed C60 Circuit Breakers 1.22 [31.1] 1.77 [45.1] 4.86 [123.4] Clearance 1.77 [45]](/thumbs/87/96339038.jpg "UL 489/CSA C22.2 No. 5 Listed C60 Circuit Breakers 1.22 [31.1] 1.77 [45.1] 4.86 [123.4] Clearance 1.77 [45]")
Multi 9 System Catalog UL 489/CSA C22.2 No. 5 Listed C60 Circuit Breakers Figure 46: UL 489/CSA C22.2 No.5 Listed C60 240 Vac Circuit Breaker with Box Lug Terminals Figure 47: UL 489/CSA C22.2 No.5 Listed
Ride and Handling Optimization
Page 1 of 6 Published: Feb 23, 2009 Ride and Handling Optimization COMPONENT LOCATION Item Part Number Description 1 Terrain Response rotary control OVERVIEW The Terrain Response system allows the driver
Main Fire Pump Engagement. Shifting Into Pump 2006 / 2007 KME
Main Fire Pump Engagement Shifting Into Pump 2006 / 2007 KME 1 Battery Switch Ensure battery switch is turned on to BOTH. 2 Ensure Maxi (Parking) Brake Set Maxi (Parking) Brake must be set or the Pump
Section of 14. Ice and Rain Protection
Ice & Rain Protection 1 of 14 WINDSCREEN WIPERS General The aircraft is fitted with two windscreen wipers, one on each pilots side windscreen, which are controlled by a 3-position (FAST, SLOW and MANUAL)
INDUSTRIAL GRADE WATER SOFTENERS LWTSF INDUSTRIAL SERIES
INDUSTRIAL GRADE WATER SOFTENERS LWTSF INDUSTRIAL SERIES 150,000 TO 1,100,000 GRAINS CAPACITY (Single, Twin, Triple or Quadruple Demand Systems Available) 1 P age Industrial Performance and Proven Reliability
OVERVIEW OF CONTROLS
π H-5819, H-5820 H-5821, H-5822 DELUXE COUNTING SCALE 1-800-295-5510 uline.com OVERVIEW OF CONTROLS DISPLAY DEFINITIONS # NAME DESCRIPTION 1 DISPLAY 2 1 3 STABLE 4 RECHARGE PAGE 1 OF 8 Displays the total
CONTAINER GUIDE WELDMENTS
CONTAINER GUIDE WELDMENTS FOR MODELS - ALL FRONT LOAD CONTAINERS 4/98 1 9110--39--0 L.H. Container Guide Weldment 1 2 9110--38--0 R.H. Container Guide Weldment 1 3 9110--56--1 Instruction Sheet (Not Shown)
SYMBOL LEGEND DANGER WARNING NOTE THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN
SYMBOL LEGEND DANGER THIS INDICATES DANGER TO THE LIFE AND HEALTH OF THE USER IS APPROPRIATE PRECAUTIONS ARE NOT TAKEN WARNING THIS WARNS THAT MATERIALS MAY BE DAMAGED IF APPROPRIATE PRECAUTIONS ARE NOT
PUSHBUTTON UNITS & INDICATOR LIGHTS CLASS 52 - WATERTIGHT / OILTIGHT - 30 MM HEAVY DUTY CUSTOM SELECTOR SWITCH DESIGNS
CLASS - WATERTIGHT / OILTIGHT - 30 MM HEAVY DUTY CUSTOM SELECTOR SWITCH DESIGNS Assembled Non-Illuminated Selector Switches: - Determine Contact Block and Location. - Select Block Suffix. Example: J =
GUARD-LITE SERIES EMERGENCY UNIT EQUIPMENT
GUARD-LITE SERIES EMERGENCY UNIT EQUIPMENT Service Questions Call: 910-259-1131 IMPORTANT SAFEGUARDS CLASS I DIV 2 HAZARDOUS LOCATION GROUPS A, B, C, AND D ZONE 2 GROUPS IIC, IIB AND IIA CLASS II DIV 2
ECET 211 Electric Machines & Controls Lecture 4-1 Motor Control Devices: Lecture 4 Motor Control Devices
ECET 211 Electric Machines & Controls Lecture 4-1 Motor Control Devices: Part 1. Manually Operated Switch Part 2. Mechanically Operated Switch Text Book: Electric Motors and Control Systems, by Frank D.
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits
II Technical Target. HF/PFC 1.5KW Lithium Battery Charger
HF/PFC 1.5KW Lithium Battery Charger Models Size(mm):348(L) 180(W) 140(H) N.W. (kg):6.33 HF/PFC On-board Charger (Lithium Battery Charger) I Product Summary & Application Scopes The charger is applicable
Dispenser Communication Error Codes for units containing the DeLaRue SDD-1700 feeders only
53 31.1.1 Dispenser Communication Error Codes for units containing the DeLaRue SDD-1700 feeders only 001 No acknowledgment received. 002 Command transmit time-out. 003 Command response receive time-out.
Fanuc Robots with Device Net
Fanuc Robots with Device Net JDS402 Robot Programming 1 INGERSOLL-RAND 2004 ALL RIGHTS RESERVED Table of Contents Page Description 3. 1K Systems overview 12. 1K System Dispense Head Checking Procedure
3000VA 120/208/230VAC
User s Manual English Smart-UPS 2200VA 120/230VAC 3000VA 120/208/230VAC 2U Rack Mount Uninterruptible Power Supply 990-1352 12/02 Introduction The APC Uninterruptible Power Supply (UPS) is designed to
GRANULES AGGLOMERATE PRODUCTION PLANT
MAGMA MACCHINE srl OFFER FOR: MR C02 GRANULES AGGLOMERATE PRODUCTION PLANT INCLUDED OF: Support plant structure Dosing and pouring system for prepolymer Activation system for adhesive with water Mixer
AUTOMATIC TRANSMISSION (5AT)
(5AT) GENERAL 1. General To improve the dynamic performance and fuel efficiency of the vehicle, a new 5-speed automatic transmission is developed. The features of this new automatic transmission are as
1.5KW HF/PFC Lithium Battery Charger. 2KW HF/PFC Lithium Battery Charger
1.5KW HF/PFC Lithium Battery Charger Size (mm):348(l) 180(W) 140(H) TCCH-H35-40 34.6V 40A TCCH-H51-33 51.1V 33A TCCH-H65-25 65V 25A TCCH-H90-20 89.8V 20A TCCH-H104-16 104V 16A TCCH-H114-14 114V 14A TCCH-H130-12
Municipal Water System Level Control
9-6st Avenue NE, # Arlington, Washington 98 (60) -88 HERRIN DESIGN & FAX: -69 MANUFACTURING HerrinMfg@aol.com Municipal Water System Level Control 6 Well Control No remote sensors No telephone lines No
COVER PLATES & ROLLERS
COVER PLATES & ROLLERS 9035-10 Revised 8/95 FOR MODELS - ALL 3/98 Item Part Number Part Description Qty. 1 9035--1--10 Top Cover Plate 1 2 62--425 3/8NC x 3/4 Hex Washer Thread Cutting Screw 8 3 62--544