UPS. MEGALINE UPS MODULAR SINGLE-PHASE from 1250 to VA THE GLOBAL SPECIALIST IN ELECTRAL AND DIGITAL BUILDING INFRASTRUCTURES

Transcription

1 UPS MEGALINE UPS MODULAR SINGLE-PHASE from 1250 to THE GLOBAL SPECIALIST IN ELECTRAL AND DIGITAL BUILDING INFRASTRUCTURES

2 Modular UPS redundant and upgradable up to 10k with perfomance and functions at the top of their category MEGALINE modular single-phase They are available in three formats: - single cabinet; - double cabinet; - 19 inch rack. All models have a microprocessor control card that can be configured on the display, by modules ed by 1250 each, and by battery kits that contain no. 3x9Ah batteries. The single cabinet and 19 inch rack models issue a from 1250 to 5000, they can house a maximum of 4 boards and 4 battery kits. Additional batteries can be stored in specific cabinets, which can be easily connected thanks to an upgrading pre-setting. The range is completed with products made of two cabinets; the first cabinet can house up to 8 modules, each up to 1250, reaching a maximum of 10k. In the second cabinet it is possible to insert up to 10 battery kits and an additional battery charger. Other battery cabinets identical to the one supplied can be added in order to further upgrade. 2

3 MEGALINE Long table single and double cabinet version Model Power: Single Double Model Power: Rack no. cabinet and dimensions x H x D (mm) Codes (6U) (6U) (6U) (6U) (6U) (6U + 3U) (6U + 2x3U) (6U) (6U + 3U) (6U + 2x3U) (6U + 3x3U) (x2) (6U + 3U) (6U + 2x3U) (6U + 3x3U) (6U + 4x3U) (x2) NOTE: values, expressed in minutes, are measured during optimal operating conditions. no. cabinet and dimensions x H x D (mm) 6U= 483 x 266 x 582 3U= 483 x 133x 584 Codes x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570)* x (270 x 475 x 570)* x (270 x 475 x 570) x (270 x 475 x 570) x (270 x 475 x 570)* x (270 x 475 x 570)* x (270 x 475 x 570) x (270 x 475 x 570)* x (270 x 475 x 570)* x (270 x 475 x 570)* (x2) x (270 x 475 x 570) x (270 x 475 x 570)* x (270 x 475 x 570)* x (270 x 475 x 570)* (x2) x (270 x 475 x 570)* x (270 x 475 x 570)* x (270 x 475 x 570)* (x2) x (270 x 475 x 570)* (x2) * The configuration requires the use a Y cable (the number of cables required is equal to n cabinet -2) MEGALINE RACK Table of long uptimes 3.UPS.LEGRAND.COM

4 MEGALINE Modular single-phase UPS with double conversion VFI Pack. Item Single - without batteries Double - without batteries Pack. Item Single (German Standard) eight , Double eight Single (French standard) eight , Single (British standard) eight , Battery expansions with 1 kb with 2 kb with 3 kb with 4 kb with 5 kb with 6 kb with 7 kb with 8 kb with 9 kb with 10 kb Battery expansion with battery charger with 1 kb with battery charger with 2 kb with battery charger with 3 kb with battery charger with 4 kb with battery charger with 5 kb with battery charger with 6 kb with battery charger with 7 kb with battery charger with 8 kb with battery charger with 9 kb with battery charger with 10 kb with battery charger Accessories Power module (P 1250) up-grade single cabinet (kb MegaLine/1) up-grade double cabinet (kb MegaLine/2) Empty battery cabinets Y cable for connecting second additional battery cabinet Kit with battery cabinet extension for tower configuration (PL MegaLine cable) Manual bypass for single cabinet (BP/1) Manual bypass for double cabinet (BP/2) Additional battery charger (CB 36) Relay interface kit NOTE: values, expressed in minutes, are measured during optimal operating conditions. 4

5 MEGALINE Modular single-phase UPS with double conversion VFI Item Single CABINET Double CABINET General Features () () Max expandability () Max expandability () Technology On-line double conversion (VFI-SS-111) UPS architecture Modular, Expandable, N+X Redundant with 1250 boards in a single cabinet Input Input nominal voltage 230 V Input voltage range 184 V 264 V at 100% of the load Minimum network operating voltage 100 V at 50% of the load THD Input current 3% Input Power Factor 0.99 from 20% of the load Input frequency 50 Hz / 60 Hz ± 2% autosensing Output Output voltage 230 V ± 1% Output frequency 50 Hz / 60 Hz synchronised THD Output voltage 1% with non-linear load aveform Sinusoidal Crest Factor 3,5 : 1 Performance when connected to the mains 92% at 100% of the load Allowed overload 300% for 1 sec. 200% for 5 sec. 150% for 30 sec. (min) 13 expandability Yes Equipment Bypass Static and Electromechanical, automatic and internally synchronised (due to overload or operating fault). Signals and Alarms Large 4-line alphanumeric display, multi-colour status indicator, audio signal Communication Ports no.1 RS 232 port, no.2 logical gates UPS Communicator Software Can be downloaded free of charge (after requesting the activation code) Electronic protections against overloads, short-circuits and excessive battery discharge. Operation stops when the ends. In-rush current limiter at start-up. Protections Sensor to connect the neutral cable correctly. Back-feed protection (electrical safety insulation of the input plug during battery-based operation). EPO contact (complete shutdown in the event of an emergency) IN/OUT mains connection Standard German / Clamp connector with universal multiple socket outlet (Italian/German standard) Mechanical features Net weight 23, ,5+57, ,5+72, Dimensions (H x x D) (mm) 475 x 270 x x 475 x 270 x 570 Installed boards Free expansion slots Installed battery kits Free expansion slots Environmental conditions Operating temperature ( C) 0 40 Degree of protection IP21 Relative humidity (%) non-condensing Noise level at 1 m (dba) 40 Certifications Standards EN , EN , EN arranty Standard arranty 2-year warranty.ups.legrand.com 5

6 MEGALINE RACK Modular single-phase UPS with double conversion VFI ide input voltage and frequency range - Operational frequency at 50 or 60 Hz with auto-recognition - Frequency conversion 50 in - 60 out or vice versa - Extension of the input frequency range for operation with -supply units - Operation in eco mode (energy savings) - Operation in load waiting mode (on demand protection) - Adjustable output voltage in 1 volt steps from the front panel - Low noise level - Internal and external temperature measurement - Fan control based on temperature and load - Pre-set for emergency remote shut-off Pack. Item RACK (German standard) eight , RACK (French standard) eight , RACK (British standard) eight , Pack. Item expansion KB additional Expansion Battery expansions for UPS Rack Rack with 1 kb Rack with 2 kb Rack with 3 kb Rack with 4 kb Rack with 1 kb with battery charger Rack with 2 kb with battery charger Rack with 3 kb with battery charger Rack with 4 kb with battery charger Accessories Power module (P 1250) Empty battery rack cabinets Manual bypass for single cabinet (BP/1) Additional battery charger (CB 36) Relay interface kit Extendable Rack Guides Kit 6U NOTE: values, expressed in minutes, are measured during optimal operating conditions. 6

7 MEGALINE RACK Modular single-phase UPS with double conversion VFI Item General Features () () Max expandability () 5000 Max expandability () 3500 Input Technology UPS architecture Input nominal voltage Input voltage range Minimum network operating voltage On-line double conversion (VFI-SS-111) Modular, Expandable, N+X Redundant with 1250 boards in a single cabinet 230 V 184 V 264 V at 100% of the load 100 V at 50% of the load THD Input current 3% Input Power Factor Input frequency 0.99 from 20% of the load 50 Hz / 60 Hz ± 2% autosensing Output Output voltage 230 V ± 1% Output frequency THD Output voltage aveform 50 Hz / 60 Hz synchronised 1% with non-linear load Sinusoidal Crest Factor 3,5 : 1 Performance when connected to the mains Allowed overload 92% at 100% of the load 300% for 1 sec. 200% for 5 sec. 150% for 30 sec. (min) 13 expandability Yes Equipment Mechanical features Bypass Signals and Alarms Communication Ports UPS Communicator Software Protections IN/OUT mains connection Static and Electromechanical, automatic and internally synchronised (due to overload or operating fault) Large 4-line alphanumeric display, multi-colour status indicator, acoustic signal no.1 RS 232 port, no.2 logical gates Can be downloaded free of charge (after requesting the activation code) Electronic protections against overloads, short-circuits and excessive battery discharge. Operation stops when the ends. In-rush current limiter at start-up. Sensor to connect the neutral cable correctly. Back-feed protection (electrical safety insulation of the input plug during battery-based operation). EPO contact (complete shutdown in the event of an emergency) Standard German / Clamp connector with universal multiple socket outlet (Italian/German standard) Net weight 23, Dimensions (H x x D) (mm) 266 x 483 x 582 Installed boards Free expansion slots Installed battery kits Free expansion slots Environmental conditions Operating temperature ( C) 0 40 Degree of protection Relative humidity (%) IP non-condensing Noise level at 1 m (dba) 40 Certifications Standards EN , EN , EN arranty Standard arranty 2-year warranty 7.UPS.LEGRAND.COM

8 orld Headquarters and International Department Limoges Cedex - France : + 33 (0) Fax : + 33 (0) AD-EXLG/UPS-ME12B/GB - 10/2012