nak feeding and transporting technique
|
|
- Alfred Craig
- 6 years ago
- Views:
Transcription
1 Helix feeder KWF The nak-vibration feeders operate with compensation of vibration forces, that means the vibration forces are balanced inside the appliance. The compensation of vibration forces results from the principle of counter vibration.. e measurements: mm a b c d e f g h k m n KWF ,5 154, x xM8 M KWF ,5 229, x xM8 M KWF ,5 267, x xM8 M e KWF 300 / 400 / 500 Direction of rotation optional right or left power supply (V/Hz) 230/50 oder 115/60 standard color of drive RAL 3002 (Sonderlackierung auf Anfrage) protection IP 31 control optional RG 1, RG 2, RG-3 (nicht im Lieferumfang) Properties and advantages of the compensation of vibratory forces: - vibration forces are balanced in the basic appliance - reduction of transmission of vibratory forces - defined and fixed interfaces toward assembly facility through compensation of torque in the linear feeder - flexible adjustment to specific feeding problems by variation of feeding-specific parameters like spring angle and rigidity of spring - omission of heavy countermasses results in lower weight of basic appliances and saving of energy - consequent modular-design principle in segmental construction 115 V 230V helix feeder drive KWF ,- 1110,- helix feeder drive KWF ,- 1290,- helix feeder drive KWF ,- 1960,- special lacquer finish 1 piece per piece 140,- special lacquer finish from 5 pcs per piece 55,- Reinraumklasse on request 2
2 n c e c nak Helix feeder KWF a a b b e d d k h KWF 200 KWF 250 e measurements: mm a b c d e g h k m n KWF x120 3x xM6 M10 3x120 KWF x120 3x xM6 M12 3x120 ee KWF 200 / 250 Direction of rotation optional right or left power supply (V/Hz) 230/50 oder 115/60 standard color of drive RAL 3002 (special varnish by request) protection IP 31 control optional RG 1, RG 2, RG-3 (not in scope of supply) 115 V 230V helix feeder drive KWF ,- 990,- helix feeder drive KWF ,- 1050,- special lacquer finish 1 piece per piece 140,- special lacquer finish from 5 pcs per piece 55,- Reinraumklasse on request 3
3 Helix feeder Complete substructure for KWF b 9 ) (4x h2 12 b 12 form measurements: mm size a b c h2 h3 KWF , ab 65 KWF , ab 65 KWF ab 65 a 60 h3 11 KWF 400/500 has double pillars with distance 60 mm and double pillar support h2 h3 Complete substructure for KWF ,- 305,- Complete substructure for KWF ,- 480,- Complete substructure for KWF ,- 530,- 4
4 e nak Helix feeder AWF Ø c f Ø d g e AWF 150 AWF 200 AWF 250 AWF 300 AWF 400 c d meassurements (mm) e f M6 M6 M8 M8 M8 g M10 M10 M10 M10 M10 sense of rotation optional right or left power supply (V/Hz) 230/50 oder 115/60 standard color of drive RAL 3002 (special varnish by request) protection IP 31 control device optional RG1, RG2, RG3 (not in scope of supply) Our helix feeders are two-masses vibration systems and operate according to the micro-throw-principle. 115 V 230V helix feeder drive AWF ,- 435,- helix feeder drive AWF ,- 510,- helix feeder drive AWF ,- 665,- helix feeder drive AWF ,- 785,- helix feeder drive AWF ,- 930,- helix feeder drive AWF 400V reinforced construction 1170,- 1090,- special varnish 1 piece per piece 140,- special varnish from 5 pcs per piece 55,- 5
5 Feeding bowls PT without helix Construction form 1 D1 S H D3 D2 Construction form 2 D1 All feeding bowls can be obtained in polyamid or aluminum. Polyamid is subject to less wear and causes significantly less noise than aluminum. Feeding bowls of polyamid are especially suitable for tempered and sharpedged parts. H S D3 D2 form 1 size D1 D2 D3 H W S PT H PT H PT H PT H PT H PT H PT H form 2 size D1 D2 D3 H W S PT H PT H PT H PT H PT H PT H PT H filling volume in dm³ ca. size form 1 form 2 PT 100 0,05 0,06 PT 150 0,17 0,21 PT 200 0,33 0,41 PT 250 0,70 0,82 PT 300 1,24 1,40 PT 400 3,55 4,00 PT 500 5,00 7,00 Feeding bowls PT (Polyamid) 65,- Feeding bowls PT (Polyamid) 107,- Feeding bowls PT (Polyamid) 215,- Feeding bowls PT (Polyamid) 330,- Feeding bowls PT (Polyamid) 395,- Feeding bowls PT (Polyamid) 488,- Feeding bowls PT (Polyamid) 65,- Feeding bowls PT (Polyamid) 107,- Feeding bowls PT (Polyamid) 215,- Feeding bowls PT (Polyamid) 330,- Feeding bowls PT (Polyamid) 395,- Feeding bowls PT (Polyamid) 488,- Feeding bowls PT (Polyamid) 710,- Feeding bowls PT (Polyamid) 710,- Feeding bowls in Aluminium on request Feeding bowls in Edelstahl on request Execution Plastic with FDA approval the same price w. Polyamid 6
6 Feeding bowls PT with standard helix Construction form 1 with slot helix 45 A 12 S B H All feeding bowls can be obtained in polyamid or aluminum. Polyamid is subject to less wear and causes significantly less noise than aluminum. Feeding bowls of polyamid are especially suitable for tempered and sharpedged parts. Construction form 1 with prismatic helix Bauform 1 Baugröße S B H A PT PT PT PT Construction form 2 with slot helix 45 A 12 S B H form 1 size S T B A PT PT PT PT Construction form 2 with prismatic helix form 2 size S T B A PT PT PT PT PT form 2 size S B H A PT PT PT PT PT Feeding bowls PT m. Nutwendel (Polyamid) 775,- Feeding bowls PT m. Nutwendel (Polyamid) 775,- Feeding bowls PT m. Nutwendel (Polyamid) 935,- Feeding bowls PT m. Nutwendel (Polyamid) 1225,- Feeding bowls PT m. Nutwendel (Polyamid) 775,- Feeding bowls PT m. Nutwendel (Polyamid) 775,- Feeding bowls PT m. Nutwendel (Polyamid) 935,- Feeding bowls PT m. Nutwendel (Polyamid) 1225,- Feeding bowls PT m. Nutwendel (Polyamid) 1655,- Feeding bowls PT m. Prismenwendel (Polyamid) 865,- Feeding bowls PT m. Prismenwendel (Polyamid) 865,- Feeding bowls PT m. Prismenwendel (Polyamid) 1065,- Feeding bowls PT m. Prismenwendel (Polyamid) 1425,- Feeding bowls PT m. Prismenwendel (Polyamid) 865,- Feeding bowls PT m. Prismenwendel (Polyamid) 865,- Feeding bowls PT m. Prismenwendel (Polyamid) 1065,- Feeding bowls PT m. Prismenwendel (Polyamid) 1425,- Feeding bowls PT m. Prismenwendel (Polyamid) 1890,- Feeding bowls in Aluminium on request 7
7 Feeding bowls PT with standard helix Construction form 2 with flat helix All feeding bowls can be obtained in polyamid or aluminum. Polyamid is subject to less wear and causes significantly less noise than aluminum. Feeding bowls of polyamid are especially suitable for tempered and sharpedged parts. Construction form 1 with radial helix 15 form 1 size S B A PT PT PT PT Construction form 2 with flat helix S A t R form 1 size S R t A PT PT PT ,5 11 PT ,5 15 Construction form 1 with radial helix 15 t S A R form 2 size S R t A PT PT PT ,5 11 PT ,5 15 PT , form 2 size S B A PT PT PT ,5 12 PT ,5 12 PT Feeding bowls PT w. flat helix (Polyamid) 650,- Feeding bowls PT w. flat helix (Polyamid) 650,- Feeding bowls PT w. flat helix (Polyamid) 770,- Feeding bowls PT w. flat helix (Polyamid) 980,- Feeding bowls PT w. flat helix (Polyamid) 650,- Feeding bowls PT w. flat helix (Polyamid) 650,- Feeding bowls PT w. flat helix (Polyamid) 770,- Feeding bowls PT w. flat helix (Polyamid) 1010,- Feeding bowls PT w. flat helix (Polyamid) 1345,- Feeding bowls PT w. radial helix (Polyamid) 650,- Feeding bowls PT w. radial helix (Polyamid) 650,- Feeding bowls PT w. radial helix (Polyamid) 770,- Feeding bowls PT w. radial helix (Polyamid) 1010,- Feeding bowls PT w. radial helix (Polyamid) 650,- Feeding bowls PT w. radial helix (Polyamid) 650,- Feeding bowls PT w. radial helix (Polyamid) 770,- Feeding bowls PT w. radial helix (Polyamid) 1010,- Feeding bowls PT w. radial helix (Polyamid) 1345,- Feeding bowls in Aluminium on request 8
8 g e nak Reinraumklasse KWF / KLF e a b c d e f g KWF , x 10 2x 9 10 KWF , ,5 3x 10 2x 9 30 KWF , x 10 2x 9 30 b a c h f b g g f d a c e d e a b c d e f g h KLF ,7 38 4,2 6,2 KLF 2 / 2, ,2 6,2 helix feeder drive KWF 300 RK ,- helix feeder drive KWF 400 RK ,- helix feeder drive KWF 500 RK ,- linear feeder KLF1 RK ,- linear feeder KLF2 RK ,- linear feeder KLF2,5 RK ,- 9
9 Linear feeder KLF 1, KLF 2, KLF 2,5 The linear feeders KLF are based upon a novel construction and operation principle, that eliminates not only the vibration forces but also the vibrational-torsional and tipping momentums in the appliance itself. By that means simplified user conditions and extended operational limits are created. - fixed countermasses and fixed rail weights - no trial run when assembling feeder rails - no mass balancing necessary - reduced vibratory transmission to the base - cessation of tipping and torsional momentums e a b c d e f g h k l m n o rail weight ± 50g KLF , ,6 50 6, , kg KLF , , kg KLF 2, , , ,5 kg 115 V 230V linear feeder KLF 1 410,- 380,- linear feeder KLF 2 470,- 410,- linear feeder KLF 2,5 570,- 515,- Reinraumklasse on request on request 10
10 Linear feeder LF 70 Support spring UF 70 e voltage V frequency Hz Current consumption A LF ,08 LF ,045 linear feeder LF 70 Ø4.2 (2x) 115 V 230V linear feeder LF ,- 260,- Support spring UF 70 60,- 60,- 11
11 71 nak Bunker / Substructure KLF1 KLF1 221,20 87,80 KLF2,5 371,20 87, M4 (mittig) h (200) (50 ) KS Aufbauplatte KLF KF Complete substructure for KLF 1 / KLF 2 / KLF 2,5 - optional pillar height from mm bunker (1 liter) KLF1 580,- bunker (1 liter) KLF2 620,- bunker (1 liter) KLF2,5 720,- Substructure kpl. for KLF 1 / KLF 2 / KLF 2,5 260,- 12
12 Control devices RG RG-1 RG-2 e RG 1 RG 2 RG-3 linear feeder helix feeder light barrier (24 V) initiator (24 V) smoothstart working voltage 230V/50Hz working voltage 115V/60Hz frequency 25 / 50 Hz 25 / 50 Hz Hz optical coupler input invertible RG-1/2 male socket M8 x 1 for control input M16x1,5 connection cable vibration feeder M16x1,5 for power supply fastening bores RG-3 5 With nak-controlers you can exactly set - combined with a light barrier or an initiator - the feeding performance and the buffer capacities of helix and linear feeders. The elctronic controlers of the model line RG are employed for the infinitely variable regulation of inductive charges like helix feeders, linear feeders and bunkers and operate according to the phase angle principle. RG-3 78 membrane keyboard female socket for vibration feeder SPS-port M12x1, 4-poles M12x1,5 dummy plug power supply M12x1,5 dummy plug The adjustment of the feeding performance is obtained by the adjusting of the magnetic potential through the set-value-potentiometer, that is built into the caselid. The control curve of the set-value-voltage can be limited with 2 trim-pots, so that always the complete rotation angle of the set-value-potentiometer can be exploited. F 50.0 WERT MENÜ Prog. EIN ANTRIEB AUS 200 fastening bores 6 Control inputs permit the switching-on or switchingoff of the appliance by other systems, that offer a switched voltage of +24 DC (e.g. a SPS). This input operates internally on the ignition impulses. Should the appliance start, the ignition impulses are run up by the boosting-time-ramp. Should the appliance stop, the ignition impulses are driven back by the flyback-time-ramp. By way of 2 jumpers on the board this function can be inverted V 230V Control devices RG-1 165,- 155,- Control devices RG-2 265,- 260,- Control devices RG-3 505,- 490,- 6 13
13 Stand SF Bedplate with borescheme for für KWF 300/400/500 e D (mm) KWF KWF KWF SF-A SF-B SF-C SF-D e Adjustable height min. max SF-A SF-B SF-C SF-D Floorstand SF with threaded column and fourfold foot transport with lifting cart possible stand SF-A 805,- stand SF-B 830,- stand SF-C 860,- stand SF-D 915,- special color from 1 piece 140,- / Stk. pecial color from 5 piece 55,- / Stk. bedplate with borescheme for KWF ,- bedplate with borescheme for KWF ,- bedplate with borescheme for KWF ,- 14
14 D nak Sword feeder / feeder band sword feeder B A C A B C D The sword feeder is appropriate for feeding parts carefully, e.g. Varnished screws. feeder band L L speed feeder bad FB 500 standard 4-36 m/min. feeder band FB 750 standard 4-36 m/min. feeder band FB 1000 standard 4-36 m/min. feeder band L= ,- feeder band L= ,- feeder band L= ,- feeder band FB=40mm with control 1350,- feeder band FB=80mm with control 1450,- sword feeder on request 15
15 nak Control device for feeder band RFB1 Electronic control device for operating 24 V DC - motors. Electronic control device for infinitely variable regulation of 24 V DC - motors with permanent magnetic field. Compact housing, with integrated power transformer for generating the motor voltage. The devices make available over internally adjustable voltage limits Umin and Umax an adjustable voltage limit. The motor voltage can be adjusted on the potentiometer, that is built into the frontplate, from 0 to 100 percent. The hook-up of the device is realized by a fast-connected power cable, the hook-up of the motor is realized over a M12 socket. e RFB1 input voltage 110 / 230 V, +6%/-10%, 50/60 Hz output voltage V output current 2:00 AM desired value target potentiometer environmental temp C measurements (LxBxH) mm 205x93x162 protection IP control device RFB1 390,-
16 Centrifuge Aussenring Drehscheibe Ø V 42W n=90 24V 42W n=90 The nak centrifuge is predestined for the feeding of small and micro parts; determined by the maximal air gap of 0,2 mm between turntable and outer ring. e measurements motor nominal voltage rated speed wattage rating rotational direction D H AH ZF control device RG ZF 400 Permanenterregter DC-Motor 230 V 165 U/min. 90 W links /rechts 230 V For the control of centrifuge 2 RG ZF 400 are necessary. centrifuge ZF ,- control device RG ZF ,- 17
17 Feeding station Bunker Fill level control Feeding rail with slideable cover Separator Jam control Linear feeder Substructure linear feeder Feeding bowl Helix feeder feeding station on request 18
Bowl feeder WV401-1 / Translation of operating and installation instructions
Bowl feeder WV401-1 / 402-1 Translation of operating and installation instructions Copyright by Afag GmbH This operation instruction applies to: Bowl feeder WV401-1 Bowl feeder WV402-1 Type 230 V / 50
More informationVersion 2016 / 07 Stator All-In-One
Mechanical Installation F1iS/F2iS, F1i/F2i, FLFM1iS, FLFM1eS Version 2016 / 07 Stator All-In-One Mechanical Installation F1iS/F2iS, F1i/F2i, FLFM1iS, FLFM1eS Konrad-Zuse-Str. 3 52477 Alsdorf T +49 (0)
More informationROSTA Tensioning Motorbases Type MB. self-adjusting maintenance-free overload-proof non-slip dampen harmful vibrations extend belt drive
Technology ROSTA Tensioning Type MB for Belt Drives The ROSTA elastic tensioning motorbase type MB, with the rubber suspension unit as swivel mounting, compensates continuously for all stretching, hopping,
More informationBowl feeder BF20 / BF25 / BF30 BF35 / BF40 / BF50
Bowl feeder BF20 / BF25 / BF30 BF35 / BF40 / BF50 Translation of operating and installation instructions Copyright by Afag GmbH This operation instruction applies to: Type Order number BF20 BF25 BF30 BF35
More informationElectronic Temperature Sensor ETS 300
Description: The ETS 300 is a compact electronic temperature sensor with digital display. Two different models are available for optimum adaptation to particular applications. The ETS 300 with built-in
More informationFascination Movement. Yesterday. Today. Tomorrow.
Feeding Fascination Movement. Yesterday. Today. Tomorrow. Feeding technology components & systems Feeding technology components Linear feeders Bowl feeder drives Feeding bowls Refilling units Control devices
More informationROSTA MOTORBASES ROSTA. Self-Tensioning Motor Mount for Belt Drives. without slippage self-adjusting maintenance-free
MOTORBASES Self-Tensioning Motor Mount for Belt Drives without slippage self-adjusting maintenance-free Technology Tensioning Motorbase Type MB for Belt Drives The elastic tensioning motorbase type MB,
More informationHigh Performance Thermal-Magnetic Circuit Breakers 410/520/
High Performance Thermal-Magnetic Circuit Breakers 0/0/30-... Description Single, double and three pole high performance thermal-magnetic circuit breakers with tease-free, trip-free, snap action mechanism
More informationSwivel Unit. elektrical
Swivel Unit elektrical Table of contents Swivel Units elektrical Order No. Swivel angle Torque Page [ ] [Nm] Product Information 6 DEF60 min. 30 - max. 330 1,6 10 Order No. Swivel angle Torque max. Page
More informationMore Precision. mainsensor Magneto-inductive displacement sensor
More Precision mainsensor Magneto-inductive displacement sensor mainsensor Magneto-inductive sensors for non-contact linear displacement measurement Measuring principle mainsensor is based on an innovative
More informationSeries 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm
CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the
More informationBowl Feeder BF10 / BF15 Translation of operating and installation instructions
Bowl Feeder BF10 / BF15 Translation of operating and installation instructions Copyright by Afag GmbH This operation instruction applies to: Bowl feeder right 12 Bowl feeder left 12 Type Order number BF10
More informationBelt bunker BB-TB60 Filling weight up to maximum 90kg
Contents Designation Page 1. Belt bunker BB-TB60 - general information 3 2. Specifications: 4 3. Accessories for belt bunker 5 3.1. Fill level checks 5 3.2. BSN level control 9 3.3. Dosing panel 10 3.4.
More informationMINIATURE METAL BELLOWS COUPLINGS
VERSATILE AND PRECISE. Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800) 426-5480 www.cmafh.com MINIATURE METAL BELLOWS COUPLINS SERIES MK 0.05 10 Nm THE
More informationMELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
More informationTELESCOPIC CYLINDERS ø mm Series RT
TELESCOPIC CYLINDERS 25 63 mm Series RT The overall dimensions are one of the most imporant aspects: in comparison with a traditional ISO cylinder of the same a reduction in size of approx. 45% (with a
More informationRKPowerlift telescope
RKPowerlift telescope Two-stage lifting column Multi-stage lifting column - RKPowerlift telescope The RKPowerlift with optimised installation height/stroke ratio Fixing 9Adaptor 9 plate with 4x M8 holes
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationGSM. Modular Design. Versions of the series. Type GSM. Gripper type P Z W R. Size. {} AS IS without O.D. clamping I.D. clamping
GSM s Modular Design Versions of the series Type GSM Gripper type P Z W R Size 32 40 50 64 30 38 45 16 20 25 32 40 16 20 25 32 40 Gripping force safety device {} AS IS without O.D. clamping I.D. clamping
More informationMELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c
MELT PRESSURE TRANSMITTERS K7 SERIES PERFORMANCE LEVEL c Voltage output The K7 Performance Level c series of Gefran are pressure transmitters for using in high temperature environment. The main characteristic
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationROSTA Tensioning Motorbases Type MB. self-adjusting maintenance-free overload-proof non-slip dampen harmful vibrations extend belt drive
83 Technology ROSTA Tensioning Motorbase Type MB for Belt Drives The ROSTA elastic tensioning motorbase type MB, with the rubber suspension unit as swivel mounting, compensates continuously for all stretching,
More informationLab Electrical Power Engineering I
INSTITUT FÜR ELEKTRISCHE MASCHINEN RHEINISCH-WESTFÄLISCHE TECHNISCHE HOCHSCHULE AACHEN Lab Electrical Power Engineering I Test 3: Induction machine with squirrel cage rotor and slip ring rotor 1 Experiment
More informationSeries 7000 Torque Sensor for PTO-shafts
Properties PTO (Power Take-Off) shaft with integrated torque and angle measurement Non-contact measurement system, high robustness Special for PTO shafts 1 ¾ und 1 3/8 Plug & Play solution, no additional
More informationDoors and fittings. Doors and fittings Aluminum Framing Hinge profile (p. 8-3) Hinge (p. 8-4) Hinge, plastic (p. 8-5)
Doors and fittings Aluminum Framing.0-1 Doors and fittings 1 4 Hinge profile (p. -) Hinge (p. -4) Hinge, plastic (p. -) Hinge, aluminum (p. -) 1 LIFTOFF hinge (p. -) Hinge, removable (p. -) Hinge, adjustable
More informationFascinating Movement. Yesterday. Today. Tomorrow.
Feeding Fascinating Movement. Yesterday. Today. Tomorrow. Feeding technology components & systems Feeding technology components Linear feeders Bowl feeder drives Feeding bowls Refilling units Control devices
More informationLinear feeder HLF07-M / 12-M / 25-M
Linear feeder HLF07-M / 12-M / 25-M Translation of operating and installation instructions Copyright by Afag GmbH This operation instruction applies to: Linear feeder Linear feeder Linear feeder Type HLF07
More informationSeries 32 compact magnetic cylinders 1/ Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 100 mm
Series 32 compact magnetic cylinders Single and double-acting, non-rotating ø 20, 25, 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 2287»» Compact design»» Wide range of models available in different
More informationVERSION 1 / Basic cylinder T Double push tandem R Through rod F Hollow through rod. VERSION 2 D Double acting S Single acting front spring
Compact cylinders to AFNOR NF E49-004- DESCRIPTION Cylinders series BU are available from Ø 20 to Ø 00 and, complying with AFNOR NF E49-004-, they re interchangeable also without using anchorages. Besides
More informationSeries 31 compact cylinders 1/
Series 3 compact cylinders Double and single-acting, double-acting non-rotating, magnetic ø2, 6, 20, 25 mm ø 32, 40, 50, 63, 80, 00 mm UNITOP The compact dimensions allow Series 3 single and double-acting
More informationApplication Coding Cable diameter Color Part No. Std. Pack Part No. Std. Pack. Female connector. gray black gray black gray black green
Connectors Connector for cables of Ø 6 10 and 10 14 mm With spring clamp connections for rigid cables of 0.5 2.5 mm 2, f fine-stranded cables of 0.5 1.5 mm 2 with ferrules, stranded cables of 0.75 1.5
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationElbtalwerk GmbH. Universität Karlsruhe Elektrotechnisches Institut. Switched Reluctance Motor. Compact High-torque Electric Motor. Current.
Elbtalwerk GmbH Switched Reluctance Motor Compact High-torque Electric Motor Current B1 Winding A1 D4 C1 C4 Pole D1 Rotation B4 A2 Rotor tooth Shaft A4 B2 Field line D3 C2 C3 D2 Stator A3 B3 Cooling air
More informationMagnetic Overcurrent Circuit Breaker
Magnetic Overcurrent Circuit Breaker 808-... Description ngle pole miniaturised magnetic circuit breakers with unique highspeed operating mechanism and push/pull on/off manual actuation. Fitted with electrically
More informationChapter 5: Flow Valves
Catalogue HY11-300/UK Contents Chapter : Flow Valves Series Description Size Mounting Page Parker Standard DIN / ISO 1/4 3/8 1/2 3/4 1 06 10 16 Throttle valves, manual adjustment MVI -2 NS -4 FS With free
More informationIridium lighting the road ahead
Lighting Iridium ing the road ahead Iridium /454 Iridium is a family of road-ing luminaires designed for three main applications residential areas and minor roads, major roads and motorways. Its modularity
More informationSMI SERIES MOTORS WITH INTEGRATED INVERTER
SERIES MOTORS WITH INTEGRATED INVERTER Series series is made up of three-phase asynchronous electric motors with integrated frequency inverter.power range is between 0,37 kw and 4 kw, while motor axis
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationZF Friedrichshafen AG Special Driveline Technology. Hysteresis brakes Hysteresis clutches Electronic control unit
ZF Friedrichshafen G Special Driveline Technology Hysteresis brakes Hysteresis clutches Electronic control unit 2 ZF-Servoplan CG Compact Gearbox ZF-Duoplan 2K Two-speed Gearboxes ZF-Ecolift Elevator Gearboxes
More informationIndustrial luminaires
Industrial luminaires acciaio When rapidity is money......you install 4 fittings in the time of 1 Industrial luminaires T5 and T8 Material: body: in zinc steel painted color: gray Degree of protection:
More informationTemposonics. G-Series Analog Redundant. Magnetostrictive Position Sensors. Redundancy for enhanced safety
Temposonics Magnetostrictive Position Sensors m SENSORS G-Series Redundant Temposonics GT2 and GT3 Measuring length 25-1500 mm Redundancy for enhanced safety Up to 3 totally separated, independent measuring
More informationInverter control of low speed Linear Induction Motors
Inverter control of low speed Linear Induction Motors Stephen Colyer, Jeff Proverbs, Alan Foster Force Engineering Ltd, Old Station Close, Shepshed, UK Tel: +44(0)1509 506 025 Fax: +44(0)1509 505 433 e-mail:
More informationCompact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287
Compact Cylinders ADN/AEN/ADNGF Inch Series, Based on ISO 21287 Compact cylinders for maximum productivity in confined spaces, combining innovative technology, high performance and reduced installation
More informationTECHNICAL CHARACTERISTICS
2 or 3-stage telescopic pneumatic cylinder Considering its high technological contents, this cylinder series represents without doubt the product with the highest degree of technical research and evolution
More informationFlexible Couplings RUPEX Series
Flexible Couplings RUPEX Series /2 Overview /2 Benefits /2 Application /2 Design /4 Function /4 Technical data /6 Type RWN hub material grey cast iron /6 Selection and ordering data / Type RWS hub material
More informationACT-74. Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø mm. Actuators DC/9 / /
Actuators Short stroke cylinders DC/91000/M, DC/93000/M Single acting Ø 12... 63 mm One third the basic length of a corresponding ISO/VDMA model Low friction, long life seal design Fully non-corrodible
More informationZX6 INTRODUCTION ZX6 HOIST 2 : 1 4 : 1. Rope Reeving. Speeds 4/1.3 m/min 5/1.6 m/min 6/2 m/min 8/2.6 m/min. Lift 6.5m 10m 15m
ZX HOIST ZX6 INTRODUCTION ZX6 HOIST The ZX6 Model is available with 4 gearbox ratio s, 3 drum lengths & 2 different reeving arrangements. These options combine to provide a comprehensive range of hoists
More informationPressure Boosting Systems
Contents KF Series Introduction of products Feature Booster System Max.8 inverters & 8 pumps installation in a system and multi inverter controlling system by PCU807 micro processer controller Application
More informationProximity switches and switch brackets
Proximity switches and switch brackets MGE.0 - Proximity switches and switch brackets 5 7 SH /S (p. -) SH /U (p. -) SH /S, SH /ST (p. -) SH /S-H (p. -5) 9 SH /U (p. -) SH /U-H (p. -7) Proximity switch
More informationFlat cylinders EZH/DZF/DZH
Flat cylinders EZH/DZF/DZH Extremely flat design Protected against torsion thanks to special piston shape Compact assembly with block mounting Wide variety of mounting options 2017/10 Subject to change
More informationAccessories smart additions for efficiency and intelligent performance
smart additions for efficiency and intelligent performance Metal bellows couplings Perfectionists you can count on Metal bellows couplings are designed for the highest requirements in servo drive technology.
More informationLinear Feeders. Drive Units Feeding Profiles Stands Accessories. Rhein-Nadel Automation GmbH
COMPONENTS Linear eeders Drive Units eeding Profiles Stands Accessories Rhein-Nadel Automation mbh Welcome to RNA ermany your market leader in the field of feeding technology! Rhein-Nadel Automation mbh
More informationTemposonics. M-Series Analog. Magnetostrictive Position Sensors. Temposonics MH Measuring length mm SENSORS
Temposonics Magnetostrictive Position Sensors m SENSORS M-Series Temposonics MH Measuring length 50-2500 mm Compact Sensor for Mobile Hydraulics Linear, Absolute Measurement in Hydraulic Cylinders Contactless
More informationIndustrial luminaires
Industrial luminaires Acciaio 112 Leader BS 101 114 Leader BS 103 3G 115 Leader BS 111 116 Leader BS 113 117 Leader 21-01, 21-04 118 BS100, BS110 119 Tores 23-01 120 Castor 25-05 121 Lumino 26-91 122 Leo
More informationMKT 240 (E3) - Environmental simulation chamber for complex temperature profiles in the low temperature range
Environmental test chambers MKT 240 (E3) - Environmental simulation chamber for complex temperature profiles in the low temperature range The MKT test chambers meet all requirements for testing under extreme
More informationBowl feeder BF20 / BF25 / BF30 BF35 / BF40 / BF50
Bowl feeder BF20 / BF25 / BF30 BF35 / BF40 / BF50 Translation of original operating instruction Copyright by Afag GmbH This operation instruction applies to: Type Order number BF20 BF25 BF30 BF35 BF40
More informationUCC Series Co-Axial Drive Pneuma-Hydraulic
UCC Series Co-Axial Drive Pneuma-Hydraulic 40mm - 200mm bore sizes Features Co-Axial Drives (UCC) consist of two integral elements; a pneumatic drive unit to provide power and an integrated, closed circuit
More informationBowl Feeder BF10 / BF15 Translation of original operating instruction
Bowl Feeder BF10 / BF15 Translation of original operating instruction Copyright by Afag GmbH This operation instruction applies to: Bowl feeder right 12 Bowl feeder left 12 Type Order number BF10 BF15
More information2. COMPACT CYLINDERS series STRONG (RS, RQ)
2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic
More informationHighest Precision: SPL Series
Highest Precision: SPL Series GAM can. Just ask! If you don t see exactly what you need, let us know. We can modify the SPL Series gearboxes to meet your needs. Page 3 provides a list of commonly requested
More informationpartial statement 106 TITUS www.efb-elektronik.de 19 Networking cabinet TITUS S (Standard)... 108-109 19 Networking cabinet TITUS E (Enhanced)...110-111 19 Networking cabinet TITUS V (pre-assembled)...
More informationCompact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm
Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple
More informationDTK. OEM Pelton Wheel Flow Sensor
OEM Pelton Wheel Flow Sensor measuring monitoring analyzing DTK Measuring Range: 0.8...9.5 to 6...90 GPH Water Measures Clear or Opaque Liquids Stainless Steel Body Pelton Wheel Design Requires No Inlet
More informationLinear guides MGE 13.2 Linear guides
13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for
More informationProduct Information. Universal rotary unit ERS
Product Information ERS ERS Compact. Flexible. Fast. ERS Electrical rotary unit with torque motor and angle of rotation > 360 as well as the pneumatic holding brake and rotary feed-through options, and
More informationELECTRIC MACHINES EUROLAB 0.3 kw
index SINGLE-PHASE MOTORS SPLIT-PHASE MOTOR DL 30130 CAPACITOR MOTOR DL 30140 UNIVERSAL MOTOR DL 30150 REPULSION MOTOR DL 30170 THREE PHASE ASYNCHRONOUS MOTORS SQUIRREL CAGE THREE PHASE ASYNCHRONOUS MOTOR
More informationAluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm
> Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the
More informationExample: L80B10 > h means that not more than 10% of the luminaires fall below 80% of the luminous flux after h.
NEW 02 Meaning of life service specifications Lx, By, Cz, LxFy LxBy Lx By LxBy stands for rated life time as well as nominal life time of a LED. Value Lx, with x in %, indicates how many percent of the
More informationOperating instructions. Linear feeder SLL 175 SLL 400 SLL 800 SLL 804 SLF 1000
Operating instructions Linear feeder SLL 175 SLL 400 SLL 800 SLL 804 SLF 1000 BA Rhein-Nadel Automation GmbH Rhein - Nadel Automation GmbH 1 19.03.2014 Table of content 1 Technical data page 3 2 Safety
More informationAUTOMATIC CHARGER AL AL12/15 FI
AUTOMATIC CHARGER AL The charger AL 12/15 FI was designed especially for small installations. It is based on the technique of automatic charger series AL combined with a shore power connection unit. This
More informationKEB-sähkömagneettiset jarrut ja kytkimet
Solutions for power transmission KEB-sähkömagneettiset jarrut ja kytkimet www.konaflex.fi MAGNET TECHNOLOGY EN KEB AUTOMATION KG All our efforts are directed towards the development, production and application
More informationAluminium tube and profile
> Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,
More informationT 3965 EN Type 3965 Solenoid Valve Island To control pneumatic actuators
T 365 EN Type 365 Solenoid Valve Island To control pneumatic actuators Application The Type 365 Solenoid Valve Island is a compact solution for the central control of pneumatic actuators in chemical and
More informationMotion without compromise
Toothed belt and spindle axes ELGA Clean, protected, strong Motion without compromise Highlights Protected: insensitive to harsh ambient conditions Clean: virtually no particle emissions for use in cleanrooms
More informationCylinders Series 61 - Aluminium profile
CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to
More informationHydrostatic. Overview 192 VEGABAR series VEGAWELL Accessory 200. Hydrostatic VEGABAR series 60 and VEGAWELL
Hydrostatic Overview 192 VEGABAR series 60 194 VEGAWELL 52 198 Accessory 200 Hydrostatic VEGABAR series 60 and VEGAWELL 191 Hydrostatic Level and pressure measurements Measuring principle The pressure
More informationELECTRIC VIBRATORS SPV & SPC
ELECTRIC VIBRATORS FOR INDUSTRY SPV & SPC SERIES 1 THE PRODUCT The Newest Design in the World: a range of Electric Vibrator Motors designed and built by vibration engineers and specialists, incorporating
More informationOscillating Mountings
Type HS for hanging screens H B F E HS 7 38 D A HS 45 50 HS 50- Z C G M L M L M L Art. o. Type Load capacity Gmin. G [] A unloaded A* load B unloaded B* load C D E F H L M Weight [kg] 07 311 001 HS 7 500
More informationRoller guide actuators - SQ ZST
Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple
More informationDRAFT 1400HP 1000HP 100HP. Reduced Voltage Solid State Starters. Softstarters SOFT. PF Controller PCS Controller PDS Controller V 1...
100HP 400HP 700HP 1000HP 1400HP PCS Softstarter Controller IN-rail mountable microprocessor controller for 3-phase motors up to 480A (3...85A din-rail mountable) Provides three different starting modes
More informationDie changing technique
Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers
More informationParticle Filter Box Model FKF
Particle Filter Box Model FKF Ferdinand Schad KG Steigstraße 25-27 D-78600 Kolbingen Telephone +49 (0) 74 63-980 - 0 Fax +49 (0) 74 63-980 - 200 info@schako.de www.schako.de Contents Description...3 Construction...
More informationThermal Overcurrent Circuit Breaker 3120-F...
Thermal Overcurrent Circuit Breaker -F... Description An extremely versatile range of rocker switch/thermal circuit breakers (S-type TO CBE to EN 694 with trip free mechanism) offering the choice of single
More informationSeries 63 ISO cylinders
Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More
More informationVoltage Output MELT PRESSURE TRANSMITTERS IN SERIES TECHNICAL SPECIFICATIONS
MELT PRESSURE TRANSMITTERS IN SERIES Voltage Output The IMPACT series of Gefran, are pressure transmitters, without transmission fluid, for using in High temperature environment (350 C). Medium pressure
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationRKPowerlift. Two-stage lifting column
RKPowerlift Two-stage lifting column Two-stage lifting column - RKPowerlift The power pack for high bending moments Fixing 99Tapped hole for simple mounting classic design technic design wave design Fixing
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationLAUDA Integral. Process thermostats for professional external thermostating across a wide temperature range from -90 up to 320 C
LAUDA Integral Process thermostats for professional external thermostating across a wide temperature range from -9 up to C Application examples Process technology Process engineering Production Research
More information1.4 SCT Temperature sensor
1.4 SCT-150-14-00 Temperature sensor Pressure-proof up to 630 bar Compact construction Rugged steel housing Simple installation -50 C to +125 C 0/4...20 ma Compact construction and high pressure resistance
More informationSemi-rotary drives DRQ
Features 40 100 mm 16 32 mm Rotating and swivelling The linear movement of the cylinder is converted into rotational movement by a backlash-compensating gear unit. Precision is increased by backlashfree
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationTransformers for Low-voltage Halogen Incandescent Lamps
Transformers for Low-voltage Halogen Incandescent Lamps Independent electronic converters 10 14 With DLI interface 14 Electronic built-in converters 15 17 Potentiometer and dimmers 18 Electromagnetic safety
More informationACME SCREW LINEAR ACTUATOR OVERALL DIMENSIONS. Motor cable length 0.3 m. T [mm]
ACME SCREW LINEAR ACTUATOR ATL 02 Stroke Actuator with DC motor La =Lc + Stroke Lc T OVERALL DIMENSIONS Rear bracket SP Pin Actuator with or 3-phase motor Capacitor Stroke end reed switches FCM Motor cable
More informationтел.: +375(1771) e mail: Fuel level sensors eurosens Dominator
тел.: +375(1771)7 13 00 e mail: office@mechatronics.by Fuel level sensors eurosens Dominator Application The devices are used in vehicle tanks and stationary capacities for fuel level measurement. The
More informationAluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%
CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,
More informationPRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS.
PRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS. TABLE OF CONTENTS 3 Compact Hydraulic 4 Product Features 4 Features and Benefits 5 How to Order 6
More informationProportional pressure reducing valve, pilot operated
Proportional pressure reducing valve, pilot operated Type DRE and DREE Sizes 10 and 25 1) Component series 6X Maximum operating pressure Maximum flow Table of contents Content 315 bar 300 l/min Page Features
More informationThermal-Magnetic Circuit Breaker M1-..
Thermal-Magnetic Circuit Breaker 30-...-M-.. Description Single or two pole rocker switch/thermal-magnetic circuit breaker with trip-free mechanism (S-type TM CBE to EN 34). The addition of a magnetic
More information