Hydrostatic. Overview 192 VEGABAR series VEGAWELL Accessory 200. Hydrostatic VEGABAR series 60 and VEGAWELL

Size: px

Start display at page:

Download "Hydrostatic. Overview 192 VEGABAR series VEGAWELL Accessory 200. Hydrostatic VEGABAR series 60 and VEGAWELL"

Clifford Murphy
5 years ago
Views:

Hydrostatic Overview 192 VEGABAR series 60 194 VEGAWELL 52

1 Hydrostatic Overview 192 VEGABAR series VEGAWELL Accessory 200 Hydrostatic VEGABAR series 60 and VEGAWELL 191

2 Hydrostatic Level and pressure measurements Measuring principle The pressure measuring cell converting the pressure into an electrical signal is the heart of the pressure transmitter. This pressure-dependent signal is converted by the integrated electronics into a standardised output signal. Different measuring cells are used to detect the pressure. The ceramic cells characterise by an excellent long-term stability and high overload resistance. The metal METEC measuring cell enables fully welded versions and covers even higher measuring ranges. VEGABAR series 60 For all industries The VEGABAR series 60 covers all requirements on suspension pressure transmitters. Excellent accuracy, overload resistance, temperature resistance and corrosion resistance are the main points which must be met. In conjunction with application-optimised housing versions and electronics, these suspension pressure transmitters are the ideal solution for use in harsh environment. Especially the front-flush, abrasion-resistant CERTEC measuring cell with its double seal system offers high reliability. VEGAWELL For gauge measurements The suspension pressure transmitters are designed for gauge measurements in water/waster applications. Different versions in combination with different cable materials offer all necessary options. 192 Hydrostatic VEGABAR series 60 and VEGAWELL

3 Overview VEGABAR 66 VEGABAR 67 Measuring cell CERTEC METEC Sensor diameter 32 mm 40 mm Measuring range mh 2 O mh 2 O Deviation in characteristics 0.1 % 0.1 % Permanent product temperature C C VEGAWELL 52 Measuring cell CERTEC Sensor diameter Measuring range from 22 mm mh 2 O Deviation in characteristics 0.1 %, 0.2 % Permanent product temperature C Hydrostatic VEGABAR series 60 and VEGAWELL 193

4 VEGABAR 66 Suspension pressure transmitter with CERTEC measuring cell Application area The VEGABAR 66 is a suspension pressure transmitter for level measurement in wells, basins and open vessels. For use in closed vessels with superimposed pressure, the instrument is available with absolute pressure measuring ranges. Advantages Dry, ceramic-capacitive sensor element Casted cable component with inner capillaries Deviation < 0.1 % High overload resistance Self-cleaning effect by front-flushness Function Sensor element is the CERTEC measuring cell with front-flush, abrasion resistant ceramic diaphragm. The hydrostatic pressure of the medium or the process pressure causes a capacitance change in the measuring cell via the diaphragm. This change is converted into an appropriate output signal and outputted as measured value. The CERTEC measuring cell is also equipped with a temperature sensor. The temperature value can be displayed via the indicating and adjustment module or processed via the signal output. SW 30 mm (1.18") SW 46 mm (1.81") 1 Version with suspension cable and threaded fitting unassembled G1½ A 2 Threaded version G1½ A, suspension cable 3 Threaded version G1½ A, connection tube L L 38,5 mm (1.52") 14 mm (0.55") 22 mm (0.87") G1½ A ø 8 mm (0.32") ø 29 mm (1.14") ø 32 mm (1.26") You will find further process fittings and options under You will find further drawings and tables under You will find mounting accessory and welded sockets in chapter "Accessory" 194 Hydrostatic VEGABAR 66

5 Approval XX without... XM Ship approval... CX ATEX II 1G, 1/2G, 2G Ex ia IIC T6... CA ATEX II 1G, 1/2G, 2G Ex ia IIC T6 + WHG... CM ATEX II 1G, 1/2G, 2G Ex ia IIC T6 + Ship approval... CI Zone 0, 0/1, 1 Ex ia IIC T6... DX ATEX II 1/2G, 2G Ex d ia IIC T6... DI Zone 0, 0/1, 1 Ex d ia IIC T6... GX ATEX II 1/2D,2D Ex td IP66 T..... Version / Process temperature E Suspension cable PE sensor diameter 32 mm / C... F Suspension cable PUR sensor diameter 32 mm / C... G Suspension cable FEP sensor diameter 32 mm/ C... H Connection tube 316L sensor diameter 32 mm/ C... Process fitting / Material XX without... AA Straining clamp / GA Thread G1½A (DIN3852-A) PN60 / 316L... GB Thread 1½NPT (ASME B1.20.1) PN60 / 316L... FB Flange DN50PN40 C, DIN 2501 / 316L... Transmitter protection X without... P PE-plastic coating... Seal measuring cell 1 FKM (VP2/A)... 2 FFKM (Kalrez 6375)... 3 EPDM (A+P 75.5/KW75F)... Pressure / Measuring range A rel. / bar (0...10kPa)... B rel. / bar (0...20kPa)... C rel. / bar (0...40kPa)... D rel. / bar ( kPa)... E rel. / bar ( kPa)... F rel. / bar ( kPa)... G rel. / bar ( kPa)... H rel. / bar ( kPa)... 1 abs. / bar ( kPa)... 2 abs. / bar ( kPa)... 3 abs. / bar ( kPa)... 4 abs. / bar ( kPa)... 5 abs. / bar ( kPa)... Electronics H mA/HART... P Profibus PA... F Foundation Fieldbus... Housing / Protection K Plastic / IP66/IP67... A Aluminium / IP66/IP67... D Aluminium double chamber / IP66/IP StSt (electropolished) 316L / IP66/IP67... T Cable outlet / IP 68, ext. housing plastic / IP R Plastic 2-chamber / IP66/IP67... Cable entry / Plug connection M M20x1.5 / without... N ½NPT / without... Indicating/adjustment module (PLICSCOM) X Without... A mounted... BR66. Total length in m PE cable ( mm) per 100 mm FEP cable ( mm) per 100 mm PUR cable ( mm) per 100 mm Tube 316L ( mm) per 100 mm Hydrostatic VEGABAR

VEGABAR 67 Suspension pressure transmitter with METEC Application area VEGABAR 67 is a suspension pressure transmitter for level measurement in wells, basins and open vessels.

6 VEGABAR 67 Suspension pressure transmitter with METEC Application area VEGABAR 67 is a suspension pressure transmitter for level measurement in wells, basins and open vessels. For use in closed vessels with superimposed pressure, the instrument is available with absolute pressure measuring ranges. Advantages Casted cable component with inner capillaries Deviation < 0.1 % High overload resistance Self-cleaning effect by front-flushness Function Measuring unit is the METEC measuring cell. It consists of the ceramic-capacitive CERTEC measuring cell and a special, temperature-compensated chemical seal system. The hydrostatic pressure of the medium or the process pressure causes a capacitance change in the measuring cell via the process diaphragm and the isolating liquid. This change is converted into an appropriate output signal. The CERTEC measuring cell is also equipped with a temperature sensor. The temperature value can be displayed via the indicating and adjustment module or processed via the signal output. SW 30 mm (1.18") SW 46 mm (1.81") G1½ A 1 Version with suspension cable and threaded fitting unassembled G1½ A 2 Threaded version G1½ A, suspension cable 3 Threaded version G1½ A, connection tube L L 38,5 mm (1.52") 14 mm (0.55") 22 mm (0.87") G1½ A ø 29 mm (1.14") ø 8 mm (0.32") ø 8 mm (0.32") ø 40 mm (1.58") 163 mm (6.42") 163 mm (6.42") You will find further process fittings and options under You will find further drawings and tables under You will find mounting accessory and welded sockets in chapter "Accessory" 196 Hydrostatic VEGABAR 67

7 Approval XX without... XM Ship approval... CX ATEX II 1G, 1/2G, 2G Ex ia IIC T6... CA ATEX II 1G, 1/2G, 2G Ex ia IIC T6 + WHG... CM ATEX II 1G, 1/2G, 2G Ex ia IIC T6 + Ship approval... CI Zone 0, 0/1, 1 Ex ia IIC T6... DX ATEX II 1/2G, 2G Ex d ia IIC T6... DI Zone 0, 0/1, 1 Ex d ia IIC T6... GX ATEX II 1/2D,2D Ex td IP66 T..... Version / Process temperature B Suspension cable FEP / C... D Connection tube 316L / C... Process fitting / Material XX without... AA Straining clamp / GA Thread G1½A (DIN3852-A) PN60 / 316L... GB Thread 1½NPT (ASME B1.20.1) PN60 / 316L... FB Flange DN50PN40 C, DIN 2501 / 316L... Pressure / Measuring range A rel. / bar (0...10kPa)... B rel. / bar (0...20kPa)... C rel. / bar (0...40kPa)... D rel. / bar ( kPa)... E rel. / bar ( kPa)... F rel. / bar ( kPa)... G rel. / bar ( kPa)... H rel. / bar ( kPa)... 1 abs. / bar ( kPa)... 2 abs. / bar ( kPa)... 3 abs. / bar ( kPa)... 4 abs. / bar ( kPa)... 5 abs. / bar ( kPa)... Electronics H mA/HART... P Profibus PA... F Foundation Fieldbus... Housing / Protection K Plastic / IP66/IP67... A Aluminium / IP66/IP67... D Aluminium double chamber / IP66/IP StSt (electropolished) 316L / IP66/IP67... T Cable outlet / IP 68, ext. housing plastic / IP R Plastic 2-chamber / IP66/IP67... Cable entry / Plug connection M M20x1.5 / without... N ½NPT / without... Indicating/adjustment module (PLICSCOM) X Without... A mounted... BR67. Total length L in m FEP cable ( mm) per 100 mm Tube 316L ( mm) per 100 mm Hydrostatic VEGABAR

8 VEGAWELL 52 Suspension pressure transmitter for continuous level measurement of liquids Application area VEGAWELL 52 is suitable for continuous level measurement of liquids in water/waste water, deep wells and in the shipbuilding industry. Advantages Dry, ceramic-capacitive CERTEC measuring cell High abrasion and overload resistance Integrated overvoltage protection Long-term stability Function The ceramic CERTEC measuring cell is the heart of VEGAWELL 52. The hydrostatic pressure of the liquid column causes a capacitance change in the measuring cell via the ceramic diaphragm. This change is converted into a standardised 4 20 ma signal. The complete measuring cell consists of high purity ceramic and characterises apart from the excellent long-term stability by a very high overload resistance. 48mm (1.89") 1 Version with straining clamp 175 mm (6.89") 38,5 mm (1.52") 14 mm (0.55") SW 30 mm (1.18") G1½ A 2 Version with threaded fitting, unassembled G1½ A, for deep wells 3 Standard version ø 8 mm (0.32") 228 mm (8.98") ø 22 mm (0.87") 227 mm (8.94") ø 32 mm (1.26") 216 mm (8.5") ø 32 mm (1.26") You will find further process fittings and options under You will find further drawings and tables under You will find mounting accessory and welded sockets in chapter "Accessory" 198 Hydrostatic VEGAWELL 52

9 Approval XX without... XM Ship approval... AX ATEX II 1G, 2G Ex ia IIC T6... AM ATEX II 1G, 2G Ex ia IIC T6 + Ship approval... AI IEC Ex ia IIC T6... Fastening / Material X4 without... A4 Straining clamp / (304)... GC Threaded fitting, unassembled G1A (ISO228-1) PN3 / 316L... GA Threaded fitting, unassembled G1½A (ISO228-1)PN3 / 316L... NP Threaded fitting, unass. G1½A (ISO228-1) PN0.2 / PVDF... GK Thread G1½A (ISO228-1)PN3 / 316L with PBT hous.;m20x GV Thread G1½A(ISO228-1)PN3/316Lw.hous.StSt (prec.casting)... Version / Process temperature A Suspension cable PE / C... D Suspension cable PUR / C... B Suspension cable FEP / C... Length K 6 m suspension cable PE... L 12 m suspension cable PE... M 27 m suspension cable PE... T individually selectable length (PE/PUR/FEP)... Transmitter material / Diameter D Duplex / 32mm... V 316L / 22 mm... K Duplex with PE coating / 35mm... P PVDF / 44 mm... Seal measuring cell 1 FKM (VP2/A)... 3 EPDM (A+P 75.5/KW75F)... P FFKM (Perlast G75S)... Measuring range A rel. / bar ( kpa)... B rel. / bar ( kpa)... C rel. / bar ( kpa)... D rel. / bar ( kpa)... E rel. / bar ( kpa)... F rel. / bar ( kpa)... G rel. / bar ( kpa)... 2 abs bar ( kPa)... 3 abs bar ( kPa)... Electronics C mA... D mA/HART + PT100 4-wire... Deviation in characteristic % %... Transmitter options X without... V for deep wells... WL52. Total length in m PE ( mm) per 100 mm FEP ( mm) per 100 mm PUR ( mm) per 100 mm Hydrostatic VEGAWELL

VEGABOX 02 Breather housing with ventilation filter Application area The VEGABOX 02 is used for electrical connection and ventilation of the suspension pressure transmitters, e.g. VEGAWELL 52.

the suspension pressure transmitter VEGAWELL 52 is carried out. An optional temperature transmitter module enables the conversion of the PT100 signals into a 4 20 ma/hart signal. Approval XX without.

10 VEGABOX 02 Breather housing with ventilation filter Application area The VEGABOX 02 is used for electrical connection and ventilation of the suspension pressure transmitters, e.g. VEGAWELL 52. Advantages Can be used for all pressure transmitters High resistance plastic housing Wall or rail mounting Protection IP 66 Function Via the filter element in the housing, a precise ventilation of the suspension pressure transmitter VEGAWELL 52 is carried out. An optional temperature transmitter module enables the conversion of the PT100 signals into a 4 20 ma/hart signal. Approval XX without... CX ATEX II 1G, 2G Ex ia IIC T6... CI Zone 0 Ex ia IIC T6... Function A Pressure compensation... C Pressure compensation and temp. transmitter mA/HART... Protective cover X without... W with... BOX mm (1.50") ø 5 mm (0.20") 72 mm (2.84") 135 mm (5.32") 118 mm (4.65") 108 mm (4.25") 85 mm (3.35") Standard version M20x1,5 100 mm (3.94") 72 mm (2.84") 139 mm (5.47") 130 mm (5.12") With protective cover 200 Hydrostatic VEGABOX 02

Measuring instrument holder for wall/tube mounting The measuring instrument holder is used for mounting pressure transmitters VEGABAR series 50 as well as suspension pressure transmitters VEGAWELL.

11 Measuring instrument holder for wall/tube mounting The measuring instrument holder is used for mounting pressure transmitters VEGABAR series 50 as well as suspension pressure transmitters VEGAWELL. The adaptation to different instrument diameters is enabled via an attached reduction piece. The material used is 316L. Version D for VEGABAR series 50; VEGAWELL Ø 22, 32, mm... E for VEGABAR series 50; VEGAWELL Ø 33, 36, 44 mm... BARMONT. 90 mm (3.54") 70 mm (2.76") 1 Adaptable diameter from mm R 32 mm (1.26") 113 mm (4.45") M6 172 mm (6.77") 1 Hydrostatic Accessory 201

Straining clamp Suitable for VEGABAR series 60 and VEGAWELL Material 27

12 Welded sleeve VEGABAR 66/67 for process fitting GA Thread G1½A... Outer dimensions Q 69x19mm... Seal X without... Material V 316L... Certificate / Standard B C 3.1-Certificate/Mat.... X without... ESMBR66. Straining clamp Suitable for VEGABAR series 60 and VEGAWELL Material Stainless steel 316L Closing screw Version / Material GA Threaded fitting G1½A PN3 / 316L... GB Threaded fitting 1½NPT PN3 / 316L... WLVSCHR. 202 Hydrostatic Accessory

Hydrostatic. Continuous level measurement. Overview Page 186 VEGABAR series 60 Page 188 VEGAWELL 52 Page 192 Accessory Page 194.

Hydrostatic. Continuous level measurement. Overview Page 186 VEGABAR series 60 Page 188 VEGAWELL 52 Page 192 Accessory Page 194. Hydrostatic Continuous level measurement Pressure Overview Page 186 VEGABAR series 60 Page 188 VEGAWELL 52 Page 192 Accessory Page 194 185 Hydrostatic Level and pressure measurement Measuring principle