Pallet Size Dolly. User manual. 1 Corporate presentation May 2013

Transcription

1 Pallet Size Dolly User manual 1 Corporate presentation May 2013

2 Overview Product Model versions & add-ons Fields of application The Milkrun train Tow Bar function and connecting dollies Strap devices Manual handling & handle Forklift handling Maximum load and stacking Transport safety Safety equipment & defective products Instructions for Use and Cleaning the Lean products Contact details 2 Corporate presentation May 2013

3 Product short description Dimensions: 1225 x 800 mm Dimensions: 1225 x 1000 mm Features o 2 fixed and 2 swivelling wheels with brake o Hideable towing bar o Ergonomic handle o Multipurpose deck o Anti-slip surface 3 Corporate presentation May 2013

4 Fields of application The lean pallet size dolly can be used widely in internal and external logistics. The dollies are designed to be used as a multipurpose load carrier. For example it can carry standard pallets, such as EURO size (1225 x 800 mm model) and ISO size (1225 x 1000 mm model), also KLT s (crates), metal cages or collapsible boxes, which they have been designed for. In case of uncertainty, please contact the supplier. The dollies can be operated by hand as one unit or connected as a milk-run train towed with a suitable tow-tractor or forklift. 5 Corporate presentation May 2013

5 The Milkrun train Max. load per Dolly: 1000 kg Max. load to be pulled in the train: 3,400 kg Max. speed of the train : 6 km/h Max. length of the milkrun train: 3-4 Dollies Examples of length and max. load of the milkrun train: o 3 Pallet Size Dollies loaded with 1000 kg each = 3000 kg in the train evenly distributed load o 3 Pallet Size Dollies loaded with 1000 kg each x800 Lean Dolly loaded with 400 kg = 3400 kg in the train evenly distributed load Important! Parameters such as the condition of the floors, aisle-width, length of milkrun route, etc have a significant impact on the design of the milkrun train. Be also aware about maximum pulling capacity of the towing tractor. Therefore, we strongly recommend that K. Hartwall is consulted and thorough tests are carried out in order to make sure that the safety aspect is properly taken care off. 6 Corporate presentation May 2013

6 Tow bar function and connecting the dollies 7 Corporate presentation May 2013

7 Strap devices Dolly has two automatic strapping devices Strap could be pulled out when handle is pushed to inside Use extra strap if device s strap is not long enough Connect metal hooks to dolly chassis holes Take loose off by pressing red button of the device Tighten up strap by using handle Release strap using handle and take loose strap back to device by pressing red button Make sure that strap is fully back to device and place extra strap inside of the dolly chassis for example 8 Corporate presentation May 2013

8 Manual handling & handle Use swinging handle if load is high. DANGER! Do not put fingers between moving handle and fixed handle Always use swivel wheel brake when parked. Apply brake by pressing down pedal and release by lifting pedal up or pusing at its upper pedal forward. 9 Corporate presentation May 2013

9 Forklift handling Take special care when lifting dolly, loading or unloading pallet size dollies! Always lift the dolly that forks will cover fully underneath surface. Make sure that load on top is evenly distributed. 10 Corporate presentation May 2013

10 Maximum load and stacking Max. load per dolly: 1,000 kg In the warehouse max. 6 empty dollies Note that dollies are not stackable when loaded! Swivel wheels must be turned inside direction 11 Corporate presentation May 2013

11 Transport safety ALWAYS SECURE LOAD PROPER WAY! Wheeled units should be secured by using combination of both lashing and blocking. However if the unit is enclosed on all sides by either the framework of the carrying vehicle of other units, it may be transported without being lashed, but it should still be subject to blocking. Note that dolly strap devices are designed for secure load on dolly itself only. We recommend the loaded dollies always to be stored on a flat surface at the warehouse. The truck should always park on flat surface for loading/unloading. 12 Corporate presentation May 2013

12 Safety equipment & defective products It is recommended to wear gloves and safety shoes when handling the dollies. The first action is to mark the defective/damaged products right away and put them aside. A defective tray, box, crate, dolly or pallet should not be in use because it is very difficult and dangerous to handle. Please send us pictures of the defective products and explanations to contactkhw@k-hartwall.com 13 Corporate presentation May 2013

13 Instructions for Use and Cleaning the Lean products Regular cleaning and washing of Dollies will ensure proper operation and long life span of the load carriers. However, the cleaning and washing must be done carefully to maintain the corrosion resistance of the electroplating. Washing can be done with water or high pressure spray: water temperature max. +50 C water pressure max. 5,0 bar time exposed to water injection/spray max. 90 seconds ensure adequate air ventilation to dry the load carriers after washing When using additional detergents: ph-value of the detergent max. 10 concentration of the detergent max. 0,5 2,0% rinse the load carriers properly from detergents with pure water always confirm first the suitability on the detergent supplier information 14 Corporate presentation May 2013