EJC B12-B20 / EJC

Transcription

1 Powerful, low-maintenance AC drive motor Proportional hydraulic controls allow for precise placement of loads Lift heights up to 17 feet with excellent residual capacities Easily maneuvered in tight and confined spaces EJC B12-B20 / EJC Electric Walkie Straddle And Fork-Over Stackers (2,600-4,400 lbs.) The electric walkie stackers feature high residual capacity and are designed for medium- to heavy-duty, multi-level stacking applications. The strong, thick steel frame chassis and solid steel baselegs provide unmatched durability and strength for years of dependable use. When combined with standard caster wheels, the well-engineered design ensures excellent stability and high residual lift capacities up to 210 inches. Equipped with a powerful, 1.6 kw drive motor, the stacker can travel up to 3.6 mph even with a full load, while the impressive 3 kw hydraulic motor effortlessly lifts rated loads to their full lift heights. The long, low-mounted control handle maximizes the distance between the operator and the chassis, reducing the amount of effort to maneuver the truck. The control handle is side-mounted, providing improved visibility of the load from the operating position. These walkie stackers are also equipped with proportional hydraulics as a standard feature, allowing fragile goods to be precisely stacked and deposited gently on the floor or in racking. The operator can control all hydraulic functions with the multi-function control handle without having to reach to the chassis.

2 Technical Data Characteristics Weights Wheels, Chassis Dimensions Performance Motors 1.1 Manufacturer Jungheinrich 1.2 Model EJC B Drive electric 1.4 Type walkie straddle stacker 1.5 Load capacity / rated load Q lbs kg 2,600 1, Load center distance c in mm Wheelbase y in mm , Service weight including battery (see line 6.5) lbs kg 2,350 1, Axle loading loaded, front / rear lbs kg 1,745 / 3, / 1, Axle loading unloaded, front / rear lbs kg 1,610 / / Tires PU (polyurethane) 3.2 Tire size, drive in mm 9.1 x x Tire size, load in mm 3.3 x x 75 Tire size, caster in mm 4.9 x x Wheels number, drive / caster / load 1 / 1 / Overall lowered height (OAL) h 1 in mm 77 1, Free-lift h 2 in mm Maximum fork height (MFH) h 3 in mm , Overall extended height (OAE) h 4 in mm 165 4, Handle height in drive position, minimum / maximum h 14 in mm 33.5 / / 1, Lowered fork height h 13 in mm Overall length, to tip of baseleg in mm , Overall length l 1 in mm 77 1) 2) 1) 2) 1, Length to fork face, headlength l 2 in mm ) 805 1) Overall baseleg width b 1 in mm 43.3 / 50 / ,100 / 1,270 / 1, Fork dimensions, thickness / width s / e in mm 1.6 / / 100 Overall chassis width b 2 in mm Fork carriage width b 3 in mm Width across forks, minimum / maximum b 5 in mm 12.4 / / 706 Baseleg opening width (BLO) b 4 in mm 35.4 / 42.1 / / 1,070 / 1, Ground clearance, under mast (loaded) m 1 in mm Ground clearance, center of wheelbase m 2 in mm Aisle width for right angle stack Ast in mm 4.35 Turning radius Wa in mm 61 1, Travel speed, loaded / unloaded mph km/h 3.6 / / Lift speed, loaded / unloaded ft / min km/h 25.5 / / Lowering speed, loaded / unloaded ft / min m / s 84.6 / / Maximum gradeability, loaded / unloaded % 8 / Service brake electro magnetic 6.1 Drive motor (rating S 2 60 minutes) hp / kw 1.3 / Lift motor rating at S 3 15% hp / kw 2.7 / Battery voltage, maximum capacity (at 6 hour rate) V / Ah 24 / Battery weight, minimum / maximum lbs kg 523 / / 263 1) Using 77 OAL simplex mast, other masts may change value. 2) Using 41 long forks. This specification sheet only provides technical values for the standard truck. Non-standard tires, different masts, additional equipment, etc., could produce other values. Rights reserved for technical changes and improvements.

3 as of: 04/2017 Jungheinrich Jungheinrich Jungheinrich EJC B14 EJC B16 EJC B20 electric electric electric walkie straddle stacker walkie straddle stacker walkie straddle stacker 3,000 1,400 3,500 1,600 4,400 2, , , ,409 2,527 1,146 2,527 1,146 2,280 1,034 1,785 / 3, / 1,724 1,817 / 4, / 1,918 1,940 / 5, / 2,442 1,660 / / 393 1,660 / / 393 1,874 / 1, / 472 PU (polyurethane) PU (polyurethane) PU (polyurethane) 9.1 x x x x x x x x x x x x x x x x x x 57 1 / 1 / 4 1 / 1 / 4 1 / 1 / , , , , , , , , , / / 1, / / 1, / / 1, , , , ) 2) 2,060 1) 2) ) 2) 2,060 1) 2) ) 2) 1) 2) 2, ) 910 1) ) 910 1) ) 910 1) 43.3 / 50 / ,100 / 1,270 / 1, / 50 / ,100 / 1,270 / 1, / 50 / ,100 / 1,270 / 1, / / / / / / / / / / / / / 42.1 / / 1,070 / 1, / 42.1 / / 1,070 / 1, / 42.1 / / 1,070 / 1, Please contact your local Jungheinrich dealer for information , , , / / / / / / / / / / / / / / / / / / / 16 7 / 16 5 / 16 electro magnetic electro magnetic electro magnetic 2.1 / / / / / / / / / / / / / / / 302

4 Technical Data Characteristics Weights Wheels, Chassis 1.1 Manufacturer Jungheinrich 1.2 Model EJC Drive electric 1.4 Type walkie fork-over stacker 1.5 Load capacity / rated load Q lbs kg 3,000 1, Load center distance c in mm Wheelbase y in mm 50 1, Service weight including battery (see line 6.5) lbs kg 2,390 1, Axle loading loaded, front / rear lbs kg 1,755 / 3, / 1, Axle loading unloaded, front / rear lbs kg 1,659 / / Tires PU (polyurethane) 3.2 Tire size, drive in mm 9.1 x x Tire size, load in mm 3.3 x x 110 Tire size, caster in mm 4.9 x x Wheels number, drive / caster / load 1 / 1 / Overall lowered height (OAL) h 1 in mm 77 1, Free-lift h 2 in mm Maximum fork height (MFH) h 3 in mm , Overall extended height (OAE) h 4 in mm 156 3, Handle height in drive position, minimum / maximum h 14 in mm 33.5 / / 1, Lowered fork height h 13 in mm Overall length, to tip of baseleg in mm N/A N/A 4.19 Overall length l 1 in mm ) 1,908 1) Dimensions Performance Motors 4.20 Length to fork face, headlength l 2 in mm ) 758 1) Overall baseleg width b 1 in mm N/A N/A 4.22 Fork dimensions, thickness / width s / e in mm 2.2 / / 185 Overall chassis width b 2 in mm Fork carriage width b 3 in mm N/A N/A 4.25 Width across forks, minimum / maximum b 5 in mm Baseleg opening width (BLO) b 4 in mm Ground clearance, under mast (loaded) m 1 in mm Ground clearance, center of wheelbase m 2 in mm Aisle width for right angle stack Ast in mm 4.35 Turning radius Wa in mm 59 1, Travel speed, loaded / unloaded mph km/h 3.6 / / Lift speed, loaded / unloaded ft / min km/h 31.5 / / Lowering speed, loaded / unloaded ft / min m / s 72.8 / / Maximum gradeability, loaded / unloaded % 8 / Service brake electro magnetic 6.1 Drive motor (rating S 2 60 minutes) hp / kw 2.1 / Lift motor rating at S 3 15% hp / kw 4.0 / Battery voltage, maximum capacity (at 6 hour rate) V / Ah 24 / Battery weight, minimum / maximum lbs kg 536 / / 336 1) Using 77 OAL simplex mast, other masts may change value. 2) Using 41 long forks. This specification sheet only provides technical values for the standard truck. Non-standard tires, different masts, additional equipment, etc., could produce other values. Rights reserved for technical changes and improvements.

5 as of: 04/2017 Jungheinrich Jungheinrich EJC 216 EJC 220 electric electric walkie fork-over stacker walkie fork-over stacker 3,500 1,600 4,400 2, , ,357 2,400 1,089 2,400 1,089 1,920 / 3, / 1,679 1,920 / 3, / 1,679 1,667 / / 333 1,667 / / 333 PU (polyurethane) PU (polyurethane) 9.1 x x x x x x x x x x x x 54 1 / 1 / 2 1 / 1 / , , , , , , / / 1, / / 1, N/A N/A N/A N/A ) 1,908 1) ) 1,988 1) ) 758 1) 33 1) 838 1) N/A N/A N/A N/A 2.2 / / / / N/A N/A N/A N/A N/A N/A N/A N/A , , / / / / / / / / / / / / / 16 5 / 16 electro magnetic electro magnetic 2.1 / / / / / / / 288

6 EJC B12-B20 / EJC EJC B12-B20 l x c Q h4 h3 h h2 s l2 y l1 EJC 214/216 Ast Wa 31.5 e b5 b4 b11 b1 b10 EJC 214/216 l6 a 2 a 2 EJC c h4 h1 c h4 h14 max. h3 Q h1 h3 Q h14 max. h h min. l x l x min. s s h2 170 m l2 l y Wa h13 m22 y l1 l1 h2 h13 l6 Wa l6 e b1 b10 b11 b5 b12 e b11 b5 b12 b1 b10 a/2 a/2 Ast a/2 a/2 Ast

7

8 The Jungheinrich Advantage Powerful operation and durable construction The electric walkie stackers feature solid steel chassis components and powerful motors to provide years of dependable service. The powerful, 1.6 kw AC drive motor ensures the maximum speed of 3.6 mph is maintained, even with a full load. An impressive, 3 kw hydraulic motor provides fast lifting speeds of up to 31.5 ft./min. with a full load. Manufactured with a rugged chassis and a rigid mast, the forklift is suitable for the lifting of heavy loads and applications requiring high productivity. Stable and customizable The EJC B12 EJC B20 lift trucks are fitted with a Class II fork carriage and optional adjustable baselegs, allowing the forklift to be easily adapted to different loads and applications. This style of stacker is suitable for straddling a pallet. The EJC 214 EJC 220 lift trucks are fitted with fixed forks resting over the baselegs, yielding a narrower, more maneuverable chassis. This style of stacker is suitable for an open-bottom-type pallet. The electric walkie stackers also provide excellent travel stability due to the forklift s standard caster wheels, which maintain direct contact with the floor at all times. Long operating times The battery compartment accepts a 24-volt industrial battery. Battery changing is carried out through overhead battery extraction. Convenient storage areas Pen tray, cup holder and clipboard are incorporated into the top of the chassis. Secure, ergonomic operation Operator security and ergonomic control features were important to the design process. All operating functions, including carriage lift and lower activation, are controlled through the multi-function control handle without having to reach to the chassis. As a result, the operator can fully concentrate on the stacking and retrieval of pallets. Precise lifting and lowering of fragile loads is achieved through proportional hydraulics. Long, low-mounted handle design keeps the operator a secure distance from the lift truck during normal operation and provides additional leverage for ease of steering. Low operating noise. The standard load backrest helps secure loose loads. Large, red emergency cut-off switch enables quick, intuitive shutdown of the forklift in case of emergency. Controlled travel The Jungheinrich electronic impulse control (speedcontrol) facilitates smooth travel with adjustments for virtually every application. Desired travel speed is maintained in various situations, including ramps and inclines. The forklift s maximum programmed travel speed (up to 3.6 mph) is possible when traveling with or without a load. Individually-adjustable travel parameters (acceleration, minimum/ maximum speed) ensure optimum adjustment to virtually every application. Load bearing caster wheel provides excellent stability on flat or uneven floors. Available options Two- and three-stage masts with lift heights up to 210 inches. Cold storage package for refrigeration and freezer applications. Keyless PIN code input for secure truck activation (CanCode). Battery discharge indicator with hour meter and service code display (CanDis). Parts when you need them Jungheinrich s Parts Fast or Parts Free Guarantee ensures next-business-day delivery by 5:00 p.m. of all Jungheinrich parts in the United States, or they re free, including freight. For customers in Canada and Mexico, the guarantee ensures shipping of parts within 24 hours from the time the order was placed by the dealer. See your local Jungheinrich dealer for program details. * Programs may be subject to change without notice and may vary by region. Please ask your local Jungheinrich dealer for complete terms and conditions. JEHN / Jungheinrich. All rights reserved. All registered trademarks are the property of their respective owners, including Jungheinrich and its logos. Some products may be shown with optional equipment JH-FORKS