9 (229) 22 (559) or 24 (610) or 27 (686) 10 Lowered in (mm) 10 No Load %
|
|
- Marvin Bruce
- 5 years ago
- Views:
Transcription
1 8HBW30 MAIN VEHICLE SPECIFICATIONS 1 Manufacturer 2 Model 3 Load Capacity lb (kg) 4 Power Type 5 Operator Position 6 Tire Type Drive/Load 7 Wheels Front/Rear 8 Fork Width 9 Overall Fork Width 9 (229) 22 (559) or 24 (610) or 27 (686) 10 Lowered 3.25 (83) Fork Height 11 Raised 9.25 (235) 12 Fork Lift 6 (152) 13 Fork Length (A) 32 (813) 36 (914) 42 (1067) 48 (1220) 60 (1524) 14 Overall Width 32.5 (826) 15 Overall Length (B) 63.7 (1618) 67.7 (1720) 73.7 (1872) 79.7 (2024) 91.7 (2329) 16 (C) Lowered 46.5 (1181) 50.5 (1283) 56.5 (1435) 62.5 (1588) 74.5 (1892) 17 Wheelbase (D) Raised 45.8 (1163) 45.8(1163) 51.8 (1316) 57.8 (1468) 69.8 (1773) 18 Turning Radius (E) 51.4 (1306) 55.4 (1407) 61.4 (1560) 67.4 (1712) 79.4 (2017) 19 Gross Weight Without Battery lb (kg) 1000 (454) 1014 (460) 1036 (470) 1058 (480) 1108 (503) 20 Full Load mph (km/h) 3.7 (6.0) Travel Speed 21 No Load mph (km/h) 3.7 (6.0) 22 Gradeability Full Load % 10 No Load % Head Length 32.1 (815) 24 Power Unit Height 31.4 (798) 25 Overall Height 56.7 (1440) Distance from Control Handle to Floor (Lowered Position) Distance from Bumper to Center of Drive Tire 31.2 (792) 9.6 (244) 28 Bumper Underclearance 4.75 (121) 29 Bumper Height 9.75 (248) 30 Number Front/Rear 1/2 31 Drive (Front) 12 x 4.75 (305 x 121) Tires 32 Size (Dia x Width) Load (Rear) 3.25 x 5.91 (83 x 150) 33 Stabilizers Steel 34 Amps Max AH Standard 510 Optional Voltage V 36 Connector/Color 37 Connector Cable Location 38 Battery Connector Cable Length 39 Compartment Dimensions: Length 31.5 (800) 1) 40 Width Standard 9.20 (234) Optional (341) 41 Weight Max lb (kg) Standard 1056 (480) Optional 1500 (680) 42 Min lb (kg) Standard 490 (220) Optional 490 (222) (A) (B) (C) (D) (E) See Dimensional Drawings. NOTE: Exterior dimensions have been given for a standard model with a 9.20 in (234 mm) wide battery compartment. 1) Length = in (794 mm) when equipped with optional battery compartment rollers. TOYOTA 8HBW (2725) Battery Walkie Rubber/Polyurethane 1 (Drive) / 2 (Load) 24 SB-175/Gray B 18 (457) III-B-1
2 DIMENSIONAL DRAWING 8HBW30 8HBW30 Unit: Need Top View Aisle Requirements - Right Angle Stacking 8HBW30 FORK LENGTH PALLET LENGTH PALLET WIDTH 30 (762) 32 (813) 36 (914) 40 (1016) 42 (1067) 44 (1118) 48 (1220) 32 (813) 32 (813) 65.2 (1656) 65.2 (1656) 65.2 (1656) 65.2 (1656) 65.2 (1656) 65.2 (1656) 65.2 (1656) 36 (914) 36 (914) 69.2 (1758) 69.2 (1758) 69.2 (1758) 69.2 (1758) 69.2 (1758) 69.2 (1758) 69.2 (1758) 42 (1067) 42 (1067) 75.2 (1910) 75.2 (1910) 75.2 (1910) 75.2 (1910) 75.2 (1910) 75.2 (1910) 75.2 (1910) 48 (1220) 48 (1220) 81.2 (2063) 81.2 (2063) 81.2 (2063) 81.2 (2063) 81.2 (2063) 81.2 (2063) 81.2 (2063) 60 (1524) 60 (1524) 93.2 (2367) 93.2 (2367) 93.2 (2367) 93.2 (2367) 93.2 (2367) 93.2 (2367) 93.2 (2367) Minimum Aisle Width for Right Angle Stacking Includes 4 in (102 mm) clearance on each side of load Add a minimum of 12 in (305 mm) for easy maneuvering III-B-2
3 8HBE30 MAIN VEHICLE SPECIFICATIONS 1 Manufacturer 2 Model 3 Load Capacity lb (kg) 4 Power Type 5 Operator Position 6 Tire Type Drive/Caster/Load 7 Wheels Front/Rear 8 Fork Width 9 Overall Fork Width Rubber/Polyurethane/Polyurethane 1 (Drive), 2 (Heavy-Duty Casters) / 2 (Load) 9 (229) 10 (254) 22 (559) or 24 (610) or 27 (686) (575) or 24.5 (622) or 27.5 (699) 10 Lowered 3.25 (83) Fork Height 11 Raised 9.25 (235) 12 Fork Lift 6 (152) 13 Fork Length (A) 36 (914) 42 (1067) 48 (1220) 60 (1524) 84 (2134) 1) 93 (2362) 1) 96 (2438) 1) 103 (2616) 14 Overall Width 36 (914) 15 Overall Length (B) 78.4 (1991) 84.4 (2144) 90.4 (2296) (2600) (3222) (3474) (3525) (3703) 16 (C) Lowered 54.8 (1392) 60.8 (1544) 66.8 (1697) 78.8 (2002) 87.6 (2225) 87.6 (2225) 87.6 (2225) 94.6 (2403) 17 Wheelbase (D) Raised 50.1 (1273) 56.1 (1425) 62.1 (1577) 74.1 (1882) 82.9 (2106) 82.9 (2106) 82.9 (2106) 89.9 (2283) 18 Turning Radius (E) 65.8 (1671) 71.7 (1821) 77.5 (1969) 89.4 (2271) 98.9 (2512) 98.9 (2512) 98.9 (2512) (2687) 19 Gross Weight Without Battery lb (kg) 1190 (540) 1212 (550) 1234 (560) 1284 (582) 1360 (617) 1400 (635) 1410 (640) 1440 (653) 20 Full Load mph (km/h) 6.2 (10.0) Travel Speed 21 No Load mph (km/h) 8.8 (14.2) 22 Gradeability Full Load % 10 No Load % Head Length 42.8 (1088) 43.3 (1100) 24 Power Unit Height 31.4 (798) 25 Overall Height 56.7 (1440) 26 Operator's Platform Height (260) Distance from Control Handle to Floor (Lowered Position) Distance from Bumper to Center of Drive Tire 37.7 (958) 16.1 (409) 29 Bumper Underclearance 4.50 (114) 30 Bumper Height 10.0 (254) 31 Number Front/Rear 3 / 2 32 Drive (Front) 12 x 4.75 (305 x 121) Tires 33 Size (Dia x Width) Caster (Front) 3 x 3.5 (76 x 89) 34 Load (Rear) 3.25 x 5.91 (83 x 150) 35 Amps Max AH Voltage V Connector/Color SB-175/Gray 38 Connector Cable Location B Battery 39 Connector Cable Length 18 (457) 40 Compartment Dimen Length 31.5 (800) 4) 41 Width (341) 42 Weight Max lb (kg) 1500 (680) 43 Min lb (kg) 490 (222) (A) (B) (C) (D) (E) See Dimensional Drawings. 1) Forks are designed to handle two 48 in x 40 in (1220 mm x 1016 mm) pallets. 2) 48 in (1220 mm) load backrest extension is standard. 3) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. 4) Length = in (794 mm) when equipped with optional battery compartment rollers. TOYOTA 8HBE (2725) Battery End Control Walkie/Rider 1) 2) 3) III-B-3
4 DIMENSIONAL DRAWING 8HBE30 8HBE30 Unit: Aisle Requirements - Right Angle Stacking 8HBE30 FORK LENGTH PALLET LENGTH PALLET WIDTH 30 (762) 32 (813) 36 (914) 40 (1016) 42 (1067) 44 (1118) 48 (1220) 36 (914) 36 (914) 73.4 (1864) 73.4 (1864) 73.4 (1864) 73.4 (1864) 73.4 (1864) 73.4 (1864) 73.4 (1864) 42 (1067) 42 (1067) 79.4 (2017) 79.4 (2017) 79.4 (2017) 79.4 (2017) 79.4 (2017) 79.4 (2017) 79.4 (2017) 48 (1220) 48 (1220) 85.4 (2169) 85.4 (2169) 85.4 (2169) 85.4 (2169) 85.4 (2169) 85.4 (2169) 85.4 (2169) 60 (1524) 60 (1524) 97.4 (2474) 97.4 (2474) 97.4 (2474) 97.4 (2474) 97.4 (2474) 97.4 (2474) 97.4 (2474) 84 (2134) 1) 2x 48 (2x 1220) (3302) (3297) (3292) (3284) (3279) (3277) (3269) 93 (2362) 2) 2x 48 (2x 1220) (3536) (3531) (3526) (3520) (3515) (3513) (3508) 96 (2438) 3) 2x 48 (2x 1220) (3615) (3612) (3607) (3602) (3599) (3594) (3589) 103 (2616) 4) 5) 2x 48 (2x 1220) (3792) (3790) (3785) (3780) (3777) (3772) (3767) Minimum Aisle Width for Right Angle Stacking Includes 4 in (102 mm) clearance on each side of load Add a minimum of 12 in (305 mm) for easy maneuvering 1) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 12 in (305 mm) of pallet overhanging the forks. 2) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 3 in (77 mm) of pallet overhanging the forks. 3) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face. 4) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 7 in (178 mm) of load overhang. 5) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. III-B-4
5 8HBE40 MAIN VEHICLE SPECIFICATIONS 1 Manufacturer 2 Model 3 Load Capacity lb (kg) 4 Power Type 5 Operator Position 6 Tire Type Drive/Caster/Load 7 Wheels Front/Rear 8 Fork Width 9 Overall Fork Width 10 Lowered Fork Height 11 Raised 12 Fork Lift 6 (152) 13 Fork Length (A) 84 (2134) 1) 2) 93 (2362) 1) 2) 96 (2438) 1) 2) 103 (2616) 1) 2) 3) 115 (2921) 2) 4) 6) 8) 144 (3658) 2) 5) 6) 8) 144 (3658) 14 Overall Width 36 (914) 15 Overall Length (B) (3222) (3474) (3525) (3703) (4033) (4745) (4745) 16 (C) Lowered 87.6 (2225) 87.6 (2225) 87.6 (2225) 94.6 (2403) (3043) (3444) (2921) Wheelbase 17 (D) Raised 82.9 (2106) 82.9 (2106) 82.9 (2106) 89.9 (2283) (2924) (3325) (2801) 18 Turning Radius (E) 98.9 (2512) 98.9 (2512) 98.9 (2512) (2687) (3325) (3731) (3210) 19 Gross Weight Without Battery lb (kg) 1570 (712) 1610 (730) 1620 (735) 1650 (748) 1770 (803) 1870 (848) 1870 (848) 20 Full Load mph (km/h) Travel Speed 21 No Load mph (km/h) 22 Gradeability Full Load % No Load % 23 Head Length 24 Power Unit Height 25 Overall Height 26 Operator's Platform Height Distance from Control Handle to Floor (Lowered Position) Distance from Bumper to Center of Drive Tire 29 Bumper Underclearance 30 Bumper Height 31 Number Front/Rear 32 Drive (Front) Tires 33 Size (Dia x Width) Caster (Front) 34 Load (Rear) 35 Amps Max AH 36 Voltage V 37 Connector/Color 38 Connector Cable Location 39 Battery Connector Cable Length 40 Compartment Dimensions: Length 41 Width 42 Weight Max lb (kg) 43 Min lb (kg) (A) (B) (C) (D) (E) See Dimensional Drawings. 1) Forks are designed to handle two 48 in x 40 in (1220 mm x 1016 mm) pallets. 2) 48 in (1220 mm) load backrest extension is standard. 3) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. 4) Forks are designed to handle three 40 in x 48 in (1016 mm x 1220 mm) pallets. 5) Forks are designed to handle three 48 in x 40 in (1220 mm x 1016 mm) pallets. 6) Tandem dual load wheels [3.25 in x 2 in (82.6 mm x 51 mm)] are standard. 7) Length = in (794 mm) when equipped with optional battery compartment rollers. 8) Load wheels drop into first slot of third pallet. 9) Load wheels drop into second slot of second pallet. TOYOTA 8HBE (3632) Battery End Control Walkie/Rider Rubber/Polyurethane/Polyurethane 1 (Drive), 2 (Heavy-Duty Casters) / 2 (Load) 10 (254) 27.5 (699) 3.25 (83) 9.25 (235) 6.2 (10.0) 8.8 (14.2) (1100) 31.4 (798) 56.7 (1440) (260) 37.7 (958) 16.1 (409) 4.5 (114) 10.0 (254) 3 / 2 12 x 4.75 (305 x 121) 3 x 3.5 (76 x 89) 3.25 x 5.91 (83 x 150) SB-175/Gray B 18 (457) 31.5 (800) 7) (341) 1500 (680) 490 (222) 2) 5) 6) 9) III-B-5
6 DIMENSIONAL DRAWING 8HBE40 8HBE40 Unit: Aisle Requirements - Right Angle Stacking 8HBE40 FORK LENGTH PALLET LENGTH PALLET WIDTH 30 (762) 32 (813) 36 (914) 40 (1016) 42 (1067) 44 (1118) 48 (1220) 84 (2134) 1) 2x 48 (2x 1220) (3302) (3297) (3292) (3284) (3279) (3277) (3269) 93 (2362) 2) 2x 48 (2x 1220) (3536) (3531) (3526) (3520) (3515) (3513) (3508) 96 (2438) 3) 2x 48 (2x 1220) (3615) (3612) (3607) (3602) (3599) (3594) (3589) 103 (2616) 4) 5) 2x 48 (2x 1220) (3792) (3790) (3785) (3780) (3777) (3772) (3767) 115 (2921) 6) 8) 9) 3x 40 (2x 1220) (4072) (4067) (4056) (4046) (4041) (4036) (4028) 144 (3658) 7) 8) 9) 3x 48 (2x 1220) (4834) (4831) (4826) (4821) (4818) (4813) (4808) 144 (3658) 7) 8) 10) 3x 48 (2x 1220) (4851) (4849) (4846) (4841) (4841) (4839) (4834) Minimum Aisle Width for Right Angle Stacking Includes 4 in (102 mm) clearance on each side of load Add a minimum of 12 in (305 mm) for easy maneuvering 1) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 12 in (305 mm) of pallet overhanging the forks. 2) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 3 in (77 mm) of pallet overhanging the forks. 3) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face. 4) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 7 in (178 mm) of load overhang. 5) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. 6) For three 40 in x 48 in (1016 mm x 1220 mm) pallets entered on the 48 in (1220 mm) face, with a total of 5 in (127 mm) of pallet overhanging the forks. 7) For three 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face. 8) Tandem dual load wheels [3.25 in x 2 in (82.6 mm x 51 mm)] are standard. 9) Load wheel drops into first slot of third pallet 10) Load wheel drops into second slot of second pallet III-B-6
7 8HBC30 MAIN VEHICLE SPECIFICATIONS 1 Manufacturer 2 Model 3 Load Capacity lb (kg) 4 Power Type 5 Operator Position 6 Tire Type Drive/Caster/Load 7 Wheels Front/Rear 8 Fork Width 9 Overall Fork Width Rubber/Polyurethane/Polyurethane 1 (Drive), 2 (Heavy-Duty Casters) / 2 (Load) 9 (229) 10 (254) 22 (559) or 24 (610) or 27 (686) (575) or 24.5 (622) or 27.5 (699) 10 Lowered 3.25 (83) Fork Height 11 Raised 9.25 (235) 12 Fork Lift 6 (152) 13 Fork Length (A) 36 (914) 1) 42 (1067) 1) 48 (1220) 1) 60 (1524) 1) 84 (2134) 1) 2) 93 (2362) 1) 2) 96 (2438) 1) 2) 1) 2) 3) 103 (2616) 14 Overall Width 32.5 (826) 15 Overall Length (B) 90.3 (2294) 96.3 (2446) (2598) (2903) (3524) (3721) (3778) (3956) 16 (C) Lowered 72.8 (1849) 78.8 (2002) 84.8 (2154) 96.8 (2459) (2672) (2672) (2672) (2850) 17 Wheelbase (D) Raised 68.1 (1730) 74.1 (1882) 80.1 (2035) 92.1 (2339) (2553) (2553) (2553) (2731) 18 Turning Radius (E) 74.7 (1897) 80.6 (2047) 86.5 (2197) 98.3 (2497) (2708) (2708) (2708) (2883) 19 Gross Weight Without Battery lb (kg) 1280 (581) 1300 (590) 1320 (599) 1370 (621) 1730 (785) 1770 (803) 1780 (807) 1805 (819) 20 Full Load mph (km/h) 6.2 (10.0) Travel Speed 21 No Load mph (km/h) 8.8 (14.2) 22 Gradeability Full Load % 10 No Load % Head Length 54.6 (1387) 24 Power Unit Height (798) Position (1422) 25 Overall Height (Handle) Position (1346) Position (1265) 26 Lowered 4 (102) Operator's Platform Height 27 Raised 10 (254) 28 Operator's Platform Depth (438) 29 Distance from Bumper to Center of Drive Tire 9.9 (251) 30 Bumper Underclearance 4.75 (121) 31 Bumper Height 9.75 (248) 32 Number Front/Rear 3 / 2 33 Drive (Front) 10 x 4.75 (254 x 121) 34 Tires Size (Dia x Width) Caster (Front) 35 Load (Rear) 36 Amps Max AH 37 Voltage V 38 Connector/Color 39 Connector Cable Location 40 Battery Connector Cable Length 41 Compartment Dimensions Length 42 Width 43 Weight Max lb (kg) 44 Min lb (kg) (A) (B) (C) (D) (E) See Dimensional Drawings. 1) 48 in (1220 mm) load backrest extension is standard. 2) Forks are designed to handle two 48 in (1220 mm) long pallets. 3) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. 4) Length = in (794 mm) when equipped with optional battery compartment rollers. TOYOTA 8HBC (2725) Battery Center Control Rider 3 x 3.5 (76 x 89) 3.25 x 5.91 (83 x 150) SB-175/Gray B 18 (457) 31.5 (800) 4) (341) 1500 (680) 490 (222) III-B-7
8 DIMENSIONAL DRAWING 8HBC30 8HBC30 Unit: 8HBC30 FORK LENGTH PALLET LENGTH Aisle Requirements - Right Angle Stacking PALLET WIDTH 30 (762) 32 (813) 36 (914) 40 (1016) 42 (1067) 44 (1118) 48 (1220) 36 (914) 36 (914) 79.8 (2027) 79.8 (2027) 79.8 (2027) 79.8 (2027) 79.8 (2027) 79.8 (2027) 79.8 (2027) 42 (1067) 42 (1067) 85.8 (2179) 85.8 (2179) 85.8 (2179) 85.8 (2179) 85.8 (2179) 85.8 (2179) 85.8 (2179) 48 (1220) 48 (1220) 98.8 (2510) 98.8 (2510) 98.8 (2510) 98.8 (2510) 98.8 (2510) 98.8 (2510) 98.8 (2510) 60 (1524) 60 (1524) (2814) (2814) (2814) (2814) (2814) (2814) (2814) 84 (2134) 1) 2x 48 (2x 1220) (3627) (3622) (3614) (3607) (3602) (3597) (3589) 93 (2362) 2) 2x 48 (2x 1220) (3874) (3871) (3866) (3858) (3856) (3853) (3846) 96 (2438) 3) 2x 48 (2x 1220) (3955) (3952) (3947) (3940) (3937) (3934) (3929) 103 (2616) 4) 5) 2x 48 (2x 1220) (3955) ( (3947) (3940) (3937) (3934) (3929) Minimum Aisle Width for Right Angle Stacking Includes 4 in (102 mm) clearance on each side of load Add a minimum of 12 in (305 mm) for easy maneuvering 1) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 12 in (305 mm) of pallet overhanging the forks. 2) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 3 in (77 mm) of pallet overhanging the forks. 3) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face. 4) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 7 in (178 mm) of load overhang. 5) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. III-B-8
9 8HBC40 MAIN VEHICLE SPECIFICATIONS 1 Manufacturer 2 Model 3 Load Capacity lb (kg) 4 Power Type 5 Operator Position 6 Tire Type Drive/Caster/Load 7 Wheels Front/Rear 8 Fork Width 9 Overall Fork Width Battery Center Control Rider Rubber/Polyurethane/Polyurethane 1 (Drive), 2 (Heavy-Duty Casters) / 2 (Load) 10 (254) 27.5 (699) 10 Lowered 3.25 (83) Fork Height 11 Raised 9.25 (235) 12 Fork Lift 6 (152) 13 Fork Length (A) 84 (2134) 1) 2) 93 (2362) 1) 2) 96 (2438) 1) 2) 1) 2) 3) 103 (2616) 14 Overall Width 32.5 (826) 15 Overall Length (B) (3524) (3721) (3778) (3956) 16 (C) Lowered (2672) (2672) (2672) (2850) 17 Wheelbase (D) Raised (2553) (2553) (2553) (2731) 18 Turning Radius (E) (2708) (2708) (2708) (2883) 19 Gross Weight Without Battery lb (kg) 1940 (880) 1980 (898) 1990 (903) 2015 (914) 20 Full Load mph (km/h) 6.2 (10.0) 21 Travel Speed No Load mph (km/h) 8.8 (14.2) 22 Gradeability Full Load % 8 No Load % Head Length 54.6 (1387) 24 Power Unit Height (798) Position (1422) 25 Overall Height (Handle) Position (1346) Position (1265) 26 Lowered 4.0 (102) Operator's Platform Height 27 Raised 11.5 (292) 28 Operator's Platform Depth (438) 29 Distance from Bumper to Center of Drive Tire 9.9 (251) 30 Bumper Underclearance 4.75 (121) 31 Bumper Height 9.75 (248) 32 Number Front/Rear 3 / 2 33 Drive (Front) 10 x 4.75 (254 x 121) Tires 34 Size (Dia x Width) Caster (Front) 3 x 3.5 (76 x 89) 35 Load (Rear) 3.25 x 5.91 (83 x 150) 36 Amps Max AH Voltage V Connector/Color SB-175/Gray 39 Connector Cable Location B 40 Battery Connector Cable Length 18 (457) 41 Compartment Dimensions: Length 31.5 (800) 4) 42 Width (341) 43 Weight Max lb (kg) 1500 (680) 44 Min lb (kg) 490 (222) (A) (B) (C) (D) (E) See Dimensional Drawings. 1) 48 in (1220 mm) load backrest extension is standard. 2) Forks are designed to handle two 48 in (1220 mm) long pallets. 3) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. 4) Length = in (794 mm) when equipped with optional battery compartment rollers. TOYOTA 8HBC (3632) III-B-9
10 DIMENSIONAL DRAWING 8HBC40 8HBC40 Unit: Aisle Requirements - Right Angle Stacking 8HBC40 FORK LENGTH PALLET LENGTH PALLET WIDTH 30 (762) 32 (813) 36 (914) 40 (1016) 42 (1067) 44 (1118) 48 (1220) 84 (2134) 1) 2x 48 (2x 1220) (3627) (3622) (3614) (3607) (3602) (3597) (3589) 93 (2362) 2) 2x 48 (2x 1220) (3874) (3871) (3866) (3858) (3856) (3853) (3846) 96 (2438) 3) 2x 48 (2x 1220) (3955) (3952) (3947) (3940) (3937) (3934) (3929) 103 (2616) 4) 5) 2x 48 (2x 1220) (3955) ( (3947) (3940) (3937) (3934) (3929) Minimum Aisle Width for Right Angle Stacking Includes 4 in (102 mm) clearance on each side of load Add a minimum of 12 in (305 mm) for easy maneuvering 1) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 12 in (305 mm) of pallet overhanging the forks. 2) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 3 in (77 mm) of pallet overhanging the forks. 3) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face. 4) For two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face, with a total of 7 in (178 mm) of load overhang. 5) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. III-B-10
11 8TB50 MAIN VEHICLE SPECIFICATIONS 1 Manufacturer 2 Model 3 Load Capacity lb (kg) 4 Power Type 5 Operator Position 6 Tire Type Drive/Caster/Load 7 Wheels Front/Rear 8 Overall Width 9 Overall Length 10 Wheelbase 11 Turning Radius 12 Gross Weight Without Battery lb (kg) (949) (1200) 1190 (540) 13 Full Load mph (km/h) 5.8 (9.3) Travel Speed 14 No Load mph (km/h) 8.8 (14.2) 15 Continuous lb (kg) 250 (114) 1) Draw Bar Pull 16 Maximum lb (kg) 750 (341) 1) 17 Power Unit Height 31.4 (798) Position (1422) 18 Overall Height (Handle) Position (1346) Position (1285) 19 Operator's Platform Height 8.3 (211) 20 Operator's Platform Depth 15.8 (401) 21 Distance from Bumper to Center of Drive Tire 9.9 (251) 22 Bumper Underclearance 4.75 (121) 23 Bumper Height 9.75 (248) 24 Number Front/Rear 3 / 2 25 Drive (Front) 10 x 4.75 (254 x 121) Tires 26 Size (Dia x Width) Caster (Front) 3 x 3.5 (76 x 89) 27 Rear 6 x 3.25 (152 x 82) 28 Amps Max AH Voltage V Connector/Color SB-175/Gray 31 Connector Cable Location B 32 Battery Connector Cable Length 18 (457) 33 Compartment Dimensions: Length (806) 2) 34 Width (341) 35 Weight Max lb (kg) 1500 (680) 36 Min lb (kg) 965 (435) 1) Coupler height at 12 in. (305 mm) 2) Length = in (794 mm) when equipped with optional battery compartment rollers. TOYOTA 8TB50 10,000 (4540) Battery Center Control Rider-Tow Tractor Rubber/Polyurethane/Polyurethane 1 (Drive), 2 (Heavy-Duty Casters) / 2 (Rear Wheels) 32.5 (826) (1353) III-B-11
12 DIMENSIONAL DRAWING 8TB50 8TB50 Unit: III-B-12
13 8HBW30, 8HBE30.40, 8HBC30.40, 8TB50 8HBW30 8HBE HBC TB50 STANDARD EQUIPMENT CHART Standard for this model Item 8HBW30 8HBE30 8HBC30 8HBE40 8HBC40 8TB50 PERFORMANCE AC Drive System - With Thermal Protection and Current Limiting 24-Volt Electrical System 6 in (152 mm) Lift Fault Code Memory with Hour Meter Reading Regenerative Braking Programmable Performance Adjustable Maximum Speed Adjustable Acceleration Adjustable Creep Speed On/Off Key Switch Lift Limit Switch Multiple Hour Meter Indicator Battery Discharge Indicator with Lift Interrupt Battery Discharge Indicator Fused Control and Power Circuits Hydraulic Overload Protecton Valve Dual 1.25 in (32 mm) Diameter Lift Cylinders Drive-Thru Freezer Curtain Feature DURABILITY Controller Area Network (CAN-bus) Communications Welded Construction with Reinforced Heavy-Duty Bumper Power-Coat Paint Finish Box Rail Fork Construction Steel Gussets Reinforced Rider Platform Steel Bulkhead Wrappers Forged Rectangular Steel Tension Rods Heavy-Duty Bushings and Pins Solid Trail Fork Casting Tapered Fork Tips with Pallet Entry Slides Four-Point Lift Linkage High-Strength Polymer Service Cover Rubber Drive Tire (Fiberglass Reinforced) Rubber Drive Tire Polyurethane Load Wheels with Steel Hubs Polyurethane Load Wheels with Aluminum Hubs (Cooler Running) Polyurethane Rear Wheels Hall-Effect Switches Axle Weldment Rubber Suspension System Load Backrest Extension - 48 in (1220 mm) H [1] [1] ERGONOMICS Multifunction Control Handle with Ergonomically Angled Hand Grips and Wrap-Around Hand Guard Dual Thumb Wheels with Twist Grips for Directional Control and Travel Speed Intuitively Positioned Lift/Lower and Horn Buttons (Horn Button on 8TB50 Only) Adjustable Height Control Handle (3-Position); Dual Hand Brake Levers Curvilinear Hand Rail with Push Buttons for Lift, Lower, Horn and High-Speed Functions Low-Effort Control Handle High-Speed, Interlock Button Soft-Cushioned Rider Platform Bubble-Cushioned Operator Floor Mat, Padded Backrest and Knee Pad Walk-Through Operator Compartment Low Platform Step Height Axle Weldment Rubber Suspension System 1) Also standard on 8HBE30 with 103 in (2616 mm) fork lengths. III-B-13
14 8HBW30, 8HBE30.40, 8HBC30.40, 8TB50 8HBW30 8HBE HBC TB50 STANDARD EQUIPMENT CHART (CON'T) Standard for this model Item 8HBW30 8HBE30 8HBC30 8HBE40 8HBC40 8TB50 SERVICEABILITY AC Drive Motor (No Brushes or Commutator) One-Piece, Lightweight Service Access Cover Lubrication Package for Pivot Points (Grease Fittings) Error Indicator with Self-Diagnostics SAFETY Stability Hand Rail with Lift, Lower, Horn and High-Speed Functions Wrap-Around Hand Guard Spring-Loaded Control Handle Runaway Protection Control Handle with Dual Brake Levers and Parking Brake Directional Reverse Switch on Control Handle Side Stabilizer Steel Bars Polyurethane Torsion Block Stabilizing Casters - 3 in dia x 3.5 in (76 mm dia x 89 mm) Electronic Horn BODY Battery Compartment in L x in W (800 mm L x 341 mm W) [2] Battery Compartment in L x in W (806 mm L x 341 mm W) [2] SB-175 Gray Battery Connector 2) Battery Compartment Length is in (794 mm) when equipped with optional battery compartment rollers. III-B-14
15 8HBW30, 8HBE30.40, 8HBC30.40, 8TB50 OPTIONS AVAILABLE CHART Option Available Item Option Code 8HBW30 8HBE30 8HBC30 8HBE40 8HBC40 8TB50 LOAD HANDLING Load Backrest Extension - 48" H 1) 8059 Standard Standard Standard 8060 Load Backrest Extension - 60" H Load Backrest Extension - 72" H 8096 LIGHTS, INDICATORS, SAFETY & MISC. Electronic Travel Alarm (Forward & Reverse) 8091 Controller Splash Guard 8098 Keyless On/Off switch 8099 Electronic Touch-Pad, Keyless Entry System with Password Protection 8100 Power Hook-Up for On-Board Terminal (24v, 2 amp) 2) 8102 Power Hook-Up for On-Board Terminal (24v, 10 amp) 2) 8103 BODY Storage Tray with Clipboard, Load Backrest Mounted 3) 4) 8066 Storage Tray with Clipboard, Battery Compartment Mounted 3) 8067 Coast Control with Jog Buttons 8069 Pallet Entry/Exit Rollers 5) 8070 Turtle Speed (3-Position Key Switch) 8081 Jog Buttons with Turtle Speed (3-Position Key Switch) 8082 Steel Bumper Skirt (2.25" Underclearance) 8083 Automatic Coupler Tow Hitch 6) 8088 Pin & Clevis Tow Hitch 7) 8089 Storage Tray with Clipboard and Stretch Wrap Holder, Load Backrest Mounted 3) 4) 8104 Rubber Front Bumper Skirt 8109 Dual Stretch Wrap Holder, Load Backrest Mounted 8110 Rubber Block Suspension System 8111 Tow Tractor 42" Hitch 8112 BATTERY ACCESSORIES Battery Compartment Rollers with Dual Side Gates 8) 8018 Battery Side Gate Interlock Switches 9) " Battery Retaining Wall Height 10) 8084 Battery Compartment " W 8092 Standard Standard Standard Standard Standard WHEELS AND TIRES Polyurethane Drive Tire 11) 8080 Non-Marking Rubber Drive Tire 11) 8068 Heavy Duty Load Wheels (Vulkollan) 12) 8062 Polyurethane Load Wheels with Aluminum Hubs (Cooler Running) 12) 8076 Standard Standard Tandem Dual Load Wheels (3.25" x 2") 12)13) 8077 Single Load Wheels (Green Dyalon A) 12) 8078 Load Wheel Debrie Deversion Device 5) 8101 Center Groved Polyurethane Drive Tire 11) 8105 Diamond Grove Polyurethane Drive Tire 11) 8106 Razor Siped Polyurethane Drive Tire 11) 8107 Spring-Loaded Stabilizing Casters 8108 Load Wheels, Durometer SPECIAL MODELS Cold Storage Conditioning 14) 8022 Lubrication Package for Pivot Points (Grease Fittings) 8055 Standard Standard Standard Standard Standard Standard Special Paint Color, Complete Truck 8064 UL-Approved Model: Type E 15) 8086 UL-Approved Model: Type EE 15)16) 8087 Factory Preprogrammed Maximum Travel Speed - 5 MPH ) Also standard on model 8HBE30 equipped with 103 in (2616 mm) long forks. 2) Not available with option codes 8086, ) For model 8HBW30, this option requires ordering option code in (341 mm) wide battery compartment. 4) For models 8HBW30 and 8HBE30 (with fork length 36" - 96") this option requires ordering either option code 8059, 8060 or ) For models 8HBE30 and 8HBC30, available on single length pallet forks only. 6) Not available with option code ) Not available with option code ) Roller height is 8.1 in. (206 mm). 9) Requires option code Battery Compartment Rollers. 10) Standard Battery Retaining Wall Height is 25" (635 mm). 11) Not available in combination with any other drive tire option. 12) Not available in combination with any other load wheel option. 13) Four load wheels per fork. Standard on model 8HBE40 equipped with 115 in (2921 mm) or 144 in (3658 mm) long forks. 14) For models 8HBE30 and 8HBE40, when option code 8022 is ordered the standard soft-cushioned rider platform will be replaced with a non-skid rider platform. 15) Not available with option codes 8102, ) This option cannot be ordered in combination with option code 8022 and III-B-15 Rev. July 2007
16 8HBW30, 8HBE30.40, 8HBC30.40, 8TB50 FORKS - OPTION CODES Fork Size 8HBW30 8HBE30 8HBC30 8HBE40 8HBC40 32" x 27" TSDR 36" x 27" ) 42" x 27" ) 48" x 27" ) 60" x 27" ) 84" x 27" ) 5) ) 2) 5) ) 2) 5) 1) 2) 5) " x 27" ) 5) ) 2) 5) ) 2) 5) 1) 2) 5) " x 27" ) 5) ) 2) 5) ) 2) 5) 1) 2) 5) " x 27" ) 2) 3) 5) ) 2) 3) 5) ) 2) 3) 5) 1) 2) 3) 5) " x 27" 2) 5) 6) 8) 9) 11) " x 27" 2) 5) 7) 8) 9) 11) " x 27" 2) 5) 7) 8) 10) 11) " x 24" " x 24" ) 42" x 24" ) 48" x 24" ) 60" x 24" ) 84" x 24" ) 5) 1) 2) 5) " x 24" ) 5) 1) 4) " x 24" ) 5) 1) 2) 5) " x 24" ) 2) 5) 1) 4) " x 22" " x 22" ) 42" x 22" ) 48" x 22" ) 60" x 22" ) 84" x 22" ) 4) 1) 2) 4) " x 22" ) 4) 1) 3) " x 22" ) 4) 1) 2) 4) " x 22" ) 2) 4) 1) 3) ) Forks are designed to handle two 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face. 2) 48 in (1220 mm) load backrest extension is standard. 3) These forks have 7 in (178 mm) longer wheelbase to allow for load overhang and proper load wheel drop. 4) For fork lengths over 60" (1524 mm), the overall fork width is in (16 mm) greater and the clearance between the forks is reduced by in (10 mm). 5) For fork lengths over 60" (1524 mm), the overall fork width is 0.5 in (13 mm) greater and the clearance between the forks is reduced by 0.5 in (13 mm). 6) Forks are designed to handle three 40 in x 48 in (1016 mm x 1220 mm) pallets entered on the 48 in (1220 mm) face. 7) Forks are designed to handle three 48 in x 40 in (1220 mm x 1016 mm) pallets entered on the 40 in (1016 mm) face. 8) Dual tandem load wheels [3.25 in x 2 in (82.6 mm x 51 mm)] are standard. 9) Load wheels drop into first slot of third pallet. 10) Load wheels drop into second slot of second pallet. 11) Heavy-duty spring loaded casters are standard on trucks with fork lengths over 104 in (2642 mm). III-B-16
17 8HBW30, 8HBE30.40, 8HBC30.40, 8TB50 ENVIRONMENTAL CONDITIONING Cold Storage Conditioning (Option Code 8022) The cold storage conditioning specification is designed for continuos operation in temperatures from 32 F (0 C) to -20 F (-29 C). Included Model Sealed Wire Harness Connectors Silicone Gel at Component Connections Heater in Control Handle Heater in Handrail Control Box Rubber Boot Over Key-Switch Transmission Gear Oil Changed [1] Hydraulic Oil Changed [1] Lubrication Package (Grease Fittings) 8HBW30 N/A Standard 8HBE30.40 Standard 8HBC30.40 N/A Standard 8TB50 N/A N/A Standard [1] Oil must be changed by the Toyota Dealership. III-B-17
18 8HBW30, 8HBE30.40, 8HBC30.40, 8TB50 BATTERY AND BATTERY COMPARTMENT SPECIFICATIONS MODEL VOLTS (V) BATTERY COMPARTMENT LENGTH WIDTH TYPE BATTERY CONNECTOR COLOR MINIMUM LENGTH MINIMUM BATTERY Weight [1] lb (kg) MAXIMUM BATTERY Weight lb (kg) MAXIMUM AMP HOUR CAPACITY (6-hour ratings) 8HBW (800) [2] 9.20 (234) SB175 GRAY 18 (457) B 490 (220) 1056 (480) (800) [2] (341) SB175 GRAY 18 (457) B 490 (220) 1500 (680) 750 8HBE (800) [2] (341) SB175 GRAY 18 (457) B 490 (220) 1500 (680) 750 8HBE (800) [2] (341) SB175 GRAY 18 (457) B 490 (220) 1500 (680) 750 8HBC (800) [2] (341) SB175 GRAY 18 (457) B 490 (220) 1500 (680) 750 8HBC (800) [2] (341) SB175 GRAY 18 (457) B 490 (220) 1500 (680) 750 8TB (800) [2] (341) SB175 GRAY 18 (457) B 965 (435) 1500 (680) 750 POS [1] The 'minimum battery weight' indicated is the lightest battery required to satisfy stability requirements of the lift truck. [2] Length = in (794 mm) when equipped with optional battery compartment rollers. B C A D III-B-18
TAKE A LOAD OFF 6000 lb. Capacity Regenerative Braking
LARGE ELECTRIC WALKIE PALLET JACK TAKE A LOAD OFF 6000 lb. Capacity Regenerative Braking Ergonomic Multifunction Control Handle Galvanized Option CLASS 3 ELECTRIC PALLET JACKS/STACKERS/TOW TRACTORS ToyotaForklift.com
More information7HBW23 MAIN VEHICLE SPECIFICATIONS
MAIN VEHICLE SPECIFICATIONS 1 Manufacturer TOYOTA 2 Model 7HBW23 3 Load Capacity lb (kg) 4500 (2040) 4 Power Type Battery 5 Operator Position Walkie 6 Tire Type Front/Rear Rubber/Polyurethane 7 Wheels
More informationPALLET TRUCKS 8HBW30, 8HBE30.40, 8HBC30.40 & 8TB50 ELECTRIC
PALLET TRUCKS 8HBW30, 8HBE30.40, 8HBC30.40 & 8TB50 ELECTRIC Performance AC drive system offers fast response to operating commands, precise power control, compact components and provides high productivity
More informationREACH TRUCK REACH NEW HEIGHTS
REACH TRUCK REACH NEW HEIGHTS 2500 4500 LBS. SPECIFICATIONS 9BRU18-23 9BDRU13-15 CLASS 2 ELECTRIC MOTOR NARROW AISLE ToyotaForklift.com 02 REACH TRUCK CAPACITY 2500 4500 LBS. WHEELBASE 57 67 IN. LOAD CENTER
More informationWALKIE STACKER REACH NEW HEIGHTS
WALKIE STACKER REACH NEW HEIGHTS 2000 2500 LBS. SPECIFICATIONS 8BWS10-13 CLASS 3 ELECTRIC PALLET JACKS/STACKERS/TOW TRACTORS ToyotaForklift.com WALKIE STACKER CAPACITY 2000 2500 LBS. BASE LEG INSIDE DIMENSION
More information7-SERIES ORDER PICKER REACH NEW HEIGHTS
7-SERIES ORDER PICKER REACH NEW HEIGHTS SPECIFICATIONS 3000 LBS. CLASS 2 ELECTRIC MOTOR NARROW AISLE ToyotaForklift.com 7-SERIES ORDER PICKER CAPACITY 3000 LBS. MAXIMUM FORK HEIGHT 240 IN. LOAD CENTER
More information8410 END RIDER PALLET TRUCK
8410 END RIDER PALLET TRUCK SPECIFICATION SHEET ALL-DUTY PALLET TRUCK DESIGNED TO MOVE YOU FORWARD With the Raymond 8000 Series pallet truck, performance goes beyond just the basic components. With Raymond,
More informationETR-X Technical Data Electric Center Ride Tow Tractor ETR-X
ETR-X Technical Data Electric Center Ride Tow Tractor ETR-X Technical Data Misc. Motor Performance Dimensions Tires/chassis Weights Description 1.1 Manufacturer STILL 1.2 Manufacturer s type designation
More informationEVERYDAY HIGH H PERFORMER
INDUSTRIAL WALKIE STACKER EVERYDAY HIGH H PERFORMER 2200 lb. Capacity Up to 189 in. Lift Height High-Visibility Mast Navigates 7 8 ft. Aisles UL-Approved Model Type E FPO NEEDS RETOUCHING CLASS 3 ELECTRIC
More informationEVERYDAY HIGH PERFORMER
INDUSTRIAL WALKIE STACKER EVERYDAY HIGH PERFORMER 2200 lb. Capacity Up to 189 in. Lift Height High-Visibility Mast Navigates 7 8 ft. Aisles UL-Approved Model Type E FPO NEEDS RETOUCHING 6BWS11-20 CLASS
More informationORDER PICKER SPECIFICATIONS 3000 LBS. CLASS 8BPUE15 8BPU15 8BPUH15
ORDER PICKER 3000 LBS. SPECIFICATIONS 8BPUE15 8BPU15 8BPUH15 CLASS 2 ELECTRIC MOTOR NARROW AISLE ToyotaForklift.com ORDER PICKER CAPACITY 3000 LBS. MAXIMUM FORK HEIGHT 241 IN. - 390 IN. LOAD CENTER 24
More information6-SERIES ORDER PICKER
6-SERIES ORDER PICKER 3000 LBS. REACH NEW HEIGHTS SPECIFICATIONS CLASS 2 ELECTRIC MOTOR NARROW AISLE ToyotaForklift.com 6-SERIES ORDER PICKER CAPACITY 3000 LBS. MAXIMUM FORK HEIGHT 204 IN. LOAD CENTER
More informationB60-80Z HD SERIES TECHNICAL GUIDE
B0-80Z HD SERIES TECHNICAL GUIDE WWW.HYSTER.COM 21 Double and Triple Pallet Forks 7 B0-80Z HD DIMENSIONS 8 1 Reference Item 33 15 13 1.0 (25) Between Loads 21 Double and Triple Pallet Forks 7 8 1 Reference
More informationEFFICIENCY, WITHIN REACH
WALKIE REACH TRUCK EFFICIENCY, IN REACH lb. Capacity Programmable Drive System Up to 189 in. Lift Height Fits 8 ft. Aisles High-Visibility Mast UL-Approved Model Type E CLASS 3 ELECTRIC PALLET JACKS/STACKERS/TOW
More informationHIGH-CAPACITY ELECTRIC CUSHION
HIGH-CAPACITY ELECTRIC CUSHION 15000 40000 LBS. SPECIFICATIONS THDE1500-4000-24 THDE3000-4000-30 CLASS 1 ELECTRIC MOTOR RIDERS ToyotaForklift.com HIGH-CAPACITY ELECTRIC CUSHION CAPACITY 15000 40000 LBS.
More information7 - S E R I E S E L E C T R I C
7 - S E R I E S E L E C T R I C CUSHION & PNEUMATIC TIRE 3, 0 0 0 4, O 0 0 L B S S P E C I F I C A T I O N S 3,000 4,000 lbs Features SAFETY Active Control (AMC) Forward tilt angle controller Rear tilt
More information7-SERIES ELECTRIC DOUBLE REACH AND STRADDLE TRUCKS SPECIFICATIONS
7-SERIES ELECTRIC S I N G L E R E A C H, DOUBLE REACH AND STRADDLE TRUCKS 3, 0 0 0 5, 0 0 0 L B S SPECIFICATIONS 3,000 5,000 lbs Standard PERFORMANCE 36V (available on ALL models) 24V (available on 7BRU18
More informationMPB-VG. MOTORIZED HAND LOW LIFT PALLET 4,500 lbs
MPB-VG MOTORIZED HAND LOW LIFT PALLET 4,500 lbs Yale motorized hand trucks combine the latest in state-of-the-art technology and ergonomics making Yale the leader for walkie applications. Controls The
More information4 - WHEEL ELECTRIC 7FBCU CUSHION TIRE. 3,000 to 6,500 lbs. 1,360 to 2,948 kg SPECIFICATIONS
4 - WHEEL ELECTRIC 7FBCU CUSHION TIRE 3,000 to 6,500 lbs. 1,360 to 2,948 kg SPECIFICATIONS 3,000 to 6,500 lbs. 1,360 to 2,948 kg Equipment SAFETY System of Active Stability (SAS) Active control rear stabilizer
More information7-SERIES ELECTRIC SPECIFICATIONS
7-SERIES ELECTRIC C U S H I O N T I R E 8 0 0 0 1 2, O 0 0 L B S SPECIFICATIONS 8000 12,000 lbs Features SAFETY System of Active Stability (SAS) Active control rear stabilizer Active mast function controller
More informationWP 3000 SERIES. Specifications Walkie Pallet Truck
WP 3000 SERIES Specifications Walkie Pallet Truck C WP 3000 Series Walkie Pallet Truck 27.9" 25.8" 16 (708 mm) (655 mm) 6.7" (170 mm) 15 [WP 3035 & WP 3045] 6.1" (155 mm) 6.7" (170 mm) [WP 3030 & WP 3040]
More informationMPR-VG. ENCLOSED END RIDER 8,000 10,000 lbs
MPR-VG ENCLOSED END RIDER 8,000 10,000 lbs Yale enclosed end riders incorporate the latest state-of-theart technology and ergonomic design, making Yale a leader in transport and cross-docking applications.
More informationMPE VH. End Rider Forklift Trucks. 6,000 / 8,000 lbs.
MPE060-080VH End Rider Forklift Trucks 6,000 / 8,000 lbs. Designed for versatility with various fork lengths capable of carrying single, double and triple pallet loads Innovative Smart technology helps
More informationTechnical Guide. Walkie Low Lift Pallet
Technical Guide Walkie Low Lift Pallet W45Z HD DIMENSIONS 15 13c 7 20 8 13a 1.0 (25mm) 14 70.0 10.0 10.0 50.7 (1289) 6 35.1 (893) 12a 5.12 (130) 8.43 (214) 3.46 (88) 6.57 (167) 21 10 12b 3.25 (83) 11 W45Z
More informationSpecifications. WT 3000 Series. Rider Pallet Truck WT 3000
C Specifications WT 00 Series Rider Pallet Truck WT 00 Series C WT 00 Series Rider Pallet Truck WT 20-2.0 foldable platform mechanical steering a 459 240 520 4.20 WT 40-2.0 foldable platform electronic
More informationES 4000 SERIES. Specifications Walkie Fork Over Stacker
ES 4000 SERIES Specifications Walkie Fork Over Stacker C ES 4000 Series Walkie Fork Over Stacker 28 21 BRAKE BRAKE OVERIDE 18 DRIVE 20 BRAKE 19 23 54" (1371 mm) 6 1.57" (40 mm) 3.54" (90 mm) 1.2" (30 mm)
More informationCORE ELECTRIC REACH NEW HEIGHTS
CORE ELECTRIC REACH NEW HEIGHTS 3000 6500 LBS. SPECIFICATIONS 7FBCU15-18 8FBCU20-32 8FBCU20-25-COMP 8FBCHU25 CLASS 1 ELECTRIC MOTOR RIDERS ToyotaForklift.com 02 CORE ELECTRIC CAPACITY 3000 6500 LBS. 131.5
More information80V ELECTRIC PNEUMATIC
80V ELECTRIC PNEUMATIC 4000 7000 LBS. REACH NEW HEIGHTS SPECIFICATIONS 8FBMKT25-30 8FBMT20-35 CLASS 1 ELECTRIC MOTOR RIDERS ToyotaForklift.com 80V ELECTRIC PNEUMATIC CAPACITY 4000 7000 LBS. WHEELBASE 62
More informationST 3000 SERIES. Specifications Stackers
ST 3000 SERIES Specifications Stackers C ST 3000 Series Stackers 34 35 30 30 33 17 34 38 36" (914 mm) 28 17.2" (437 mm) BRAKE 21 23 DRIVE BRAKE OVERRIDE 18 20 BRAKE 19 42.4% 4"(102 mm) 1.57" (40 mm) 12.8%
More informationHeavy Duty Pallet Trucks Capacity 6000 and 8000 lbs.
Designed & Built In The US Linde Material Handling North merica Corporation Heavy Duty Pallet Trucks Capacity 6000 and 8000 lbs. W 27/6 and WR 27/6 SRIS 1101 Design: Maximum operator comfort and productivity
More informationSX 3000 SERIES. Specifications Stackers
SX 3000 SERIES Stackers C SX 3000-30 Model Stackers 34 35 30 30 33 17 34 38.3" (1201 mm) BRAKE 28 20" (508 mm) 21 BRAKE OVERRIDE 18 23 DRIVE 20 BRAKE 19 4" (102 mm).4% 1.57" (40 mm) 11.9% 2" (51 mm) 2.36"
More informationHIGH-CAPACITY LARGE IC CUSHION
HIGH-CAPACITY LARGE IC CUSHION 25000 100000 LBS. SPECIFICATIONS T HDC2500-3500-24 T HDC2500-5000-30 T HDC3000-5500-36 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY LARGE
More informationThe new definition of dependability.
8000 Series Pallet Trucks The new definition of dependability. Due to continuous product improvement, specifications are subject to change without notice or obligation. Raymond, Above. And beyond., ACR
More information6-SERIES ELECTRIC ORDER PICKER
S O L U T I O N S / A T W O R K 6-SERIES ELECTRIC ORDER PICKER 3 0 0 0 l b 3000 lb Standard & Optional Features PERFORMANCE 24V Electrical System Toyota Advanced Control System (TACS) with metal oxide
More informationDT 3000 SERIES. Specifications Double Stacker
DT 3000 SERIES Specifications DT 3040-2.0 without platform mechanical steering 4.5 4.4 4.9 1.6 Q 4.2 125 170 140 29 89 1.9 4.35 4.21 4.25 4.22 1.8 4.20 4.22 4.19 4.34 DT 3040-2.0 foldable platform mechanical
More informationHyster E45-65Z Lift Truck Dimensions
Hyster E45-65Z Lift Truck Dimensions 16 4.0 (102) 36 19 16 EQUAL INTERSECTING RIGHT ANGLE AISLE WITH 42" (1 067) WIDE LOAD AND 32" (813) LONG LOAD. 65.2" (1 656) 65.9" (1 674) 67.1" (1 704) 69.1" (1 755)
More information7700 and 7720 DEEP-REACH TRUCK
7700 and 7720 DEEP-REACH TRUCK SPECIFICATION SHEET INNOVATION. DESIGN. PERFORMANCE. The 7000 Series Reach-Fork design starts with an innovative suspension system that creates superior load stability at
More informationMPB040-E Motorized Hand Low Lift Pallet Trucks
MPB040-E Motorized Hand Low Lift Pallet Trucks 2515-2 4,000 lbs Yale motorized hand trucks combine the latest in state-of-the-art technology and ergonomics making Yale the leader for walkie applications.
More informationCORE IC CUSHION REACH NEW HEIGHTS
CORE IC CUSHION REACH NEW HEIGHTS 3000 6500 LBS. SPECIFICATIONS 8FGCU15-32 8FGCSU20 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com CORE IC CUSHION CAPACITY 3000 6500 LBS. WHEELBASE
More informationWP 3000 SERIES. Specifications Pedestrian Pallet Truck
C WP 3000 SERIES Specifications Pedestrian Pallet Truck C WP 3000 Series Pedestrian Pallet Truck WP 3010 override drive 1.6 Q 4.9 1.8 159 1.9 125 86 4.22a 4.35 4.22 4.21 4.25 4.20 4.22 100 4.19 4.33 /
More informationSRX Series. Single & Double Reach Trucks. 36 Volt AC-Powered 3,500 & 4,500 lbs. Capacities I Single Reach 3,000 lbs. Capacity I Double Reach
R SRX Series Single & Double Reach Trucks 36 Volt AC-Powered 3,500 & 4,500 lbs. Capacities I Single Reach 3,000 lbs. Capacity I Double Reach S P E C I F I C A T I O N S MAIN TRUCK SPECIFICATIONS 1 UniCarriers
More informationSRX Series. Single & Double Reach Trucks. 36 Volt AC-Powered 3,500 & 4,500 lbs. Capacities I Single Reach 3,000 lbs. Capacity I Double Reach
R SRX Series Single & Double Reach Trucks 36 Volt AC-Powered 3,500 & 4,500 lbs. Capacities I Single Reach 3,000 lbs. Capacity I Double Reach S P E C I F I C A T I O N S MAIN TRUCK SPECIFICATIONS BATTERY
More informationHIGH-CAPACITY IC CUSHION
HIGH-CAPACITY IC CUSHION 18000 22000 LBS. SPECIFICATIONS THDC1800-2200B-24 THDC1800-36 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY IC CUSHION CAPACITY 18000 22000 LBS.
More informationET 4000 SERIES. Specifications Rider Stacker with Initial Lift
C ET 4000 SERIES Specifications Rider Stacker with Initial Lift C ET 4000 Series Rider Stacker with Initial Lift * battery roll out height, initial lift lowered ET 4000 Series Specifications Misc. Motors
More informationSpecifications. PC 4500 Series. Center Control Pallet Truck PC Series
C Specifications PC 4500 Series Center Control Pallet Truck PC 4500 Series C PC 4500 Series Center Control Pallet Truck Manual Steering Option Electronic Power Steering Standard 27.5" Standard 22.5" Optional
More informationSERVICE MANUAL. Pallet Trucks
SERVICE MANUAL Pallet Trucks 8HBW30 40,001 and up 8HBE30 40,001 and up 8HBE40 40,001 and up 8HBC30 40,001 and up 8HBC40 40,001 and up 8TB50 40,001 and up 00700-CL398-13 Issued: 6 May 2013 2013 by Toyota
More informationElectric Reach Trucks HYUNDAI HEAVY INDUSTRIES
Electric Reach Trucks HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed reach trucks provide every operator
More informationPR 4500 SERIES. Specifications Rider Pallet Truck
PR 4500 SERIES Specifications Rider Pallet Truck C Rider Pallet Truck 9.12" (230 mm) 9" (230 mm) 7.3" (185 mm) 11 10" (255 mm) 38" (965 mm) 16 15 10" (255 mm) 23.3" 84", 132" 32.6" 93", 141" 35.3" 96",
More informationET 4000 SERIES. Specifications Rider Stacker
C ET 4000 SERIES Specifications Rider Stacker C ET 4000 Series Rider Stacker 4.5 4.22 4.4 4.2 4.3 Q 1.6 1055 4.9 4.8 90 30 1.9 128* 270 456 4.19 4.35 4.24 4.25 3.7 520 3.6 4.21 100 4.22 100 1.8 4.20 4.34
More informationMPE060 MPE080. Truck shown with optional equipment. Rider/Walkie Pallet Trucks 6,000-8,000 lbs.
MPE060 MPE080 OPTIONAL POWER ASSIST STEERING Truck shown with optional equipment Rider/Walkie Pallet Trucks 6,000-8,000 lbs. MPE060/MPE080 As a leader in materials handling, Yale offers so much more than
More informationSHR 5500 SERIES. Specifications Heavy-Duty Walkie Reach Stacker
SHR 5500 SERIES Specifications Heavy-Duty Walkie Reach Stacker C SHR 5500 Series Heavy-Duty Walkie Reach Stacker 80 4.13" (105 mm) 4" (102 mm) 36" (915 mm) 32" 8" (815 mm) (204 mm) 16 15 4.13" (105 mm)
More informationLARGE IC CUSHION REACH NEW HEIGHTS
LARGE IC CUSHION REACH NEW HEIGHTS 8000 15500 LBS. SPECIFICATIONS 8FGC35U-70U CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com LARGE IC CUSHION CAPACITY 8000 15500 LBS. WHEELBASE 61.8
More informationWALKIE/RIDER MOTORIZED HAND PALLET TRUCK
WALKIE/RIDER MOTORIZED HAND PALLET TRUCK the hyster advantage PRoDUCTIVITY DEPENDABILITY ECONOMICS The Hyster B60Z AC truck is the simplest way to boost your productivity. It is easy to operate, has minimal
More informationWalkie/Rider Motorized Hand Pallet Truck. B80Z AC Series
Walkie/Rider Motorized Hand Pallet Truck B80Z AC Series 2 THE HYSTER ADVANTAGE Productivity: Why work harder when you can work smarter? The B80Z AC hand pallet truck helps you do just that with features
More informationSpecifications. GPC 3000 Series. Low Level Order Picker GPC Series
C Specifications GPC 3000 Series Low Level Order Picker GPC 3000 Series C GPC 3000 Series Low Level Order Picker GPC 3020, 3040 and 3060 Rear Work Assist accessory tube Load backrest Backrest grab bar
More informationN30-40ZRS/ZDRS SERIES TECHNICAL GUIDE
N30-40ZRS/ZDRS SERIES TECHNICAL GUIDE WWW.HYSTER.COM 24 5.0 (127) x 3.9 (99) N35-40ZRS2 DIMENSIONS Chassis 42.8" (1087) O.H.G. Width 42.1 (1070) 3.9 (100) 30.0 (762) 14.2 (360) 24 5.0 (127) x 3.9 (99)
More informationWalkie/Rider Motorized Hand Pallet Truck. B80Z AC Series
Walkie/Rider Motorized Hand Pallet Truck B80Z AC Series 2 THE HYSTER ADVANTAGE Productivity: Why work harder when you can work smarter? The B80Z AC hand pallet truck helps you do just that with features
More informationWalkie/Rider Motorized Hand Pallet Truck. B60Z AC Series
Walkie/Rider Motorized Hand Pallet Truck B60Z AC Series 2 THE HYSTER ADVANTAGE PRODUCTIVITY: The Hyster B60Z AC is the simplest way to boost your productivity. It is easy to operate, has minimal service
More informationES 4000 SERIES. Specifications Pedestrian Stacker with Initial Lift
C ES 4000 SERIES Specifications Pedestrian Stacker with Initial Lift C ES 4000 Series Pedestrian Stacker with Initial Lift brake brake override drive brake * battery roll out height, initial lift lowered
More informationEJC B12-B20 / EJC
Powerful, low-maintenance AC drive motor Proportional hydraulic controls allow for precise placement of loads Lift heights up to 17 feet with excellent residual capacities Easily maneuvered in tight and
More informationCORE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU15-32 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE
CORE IC PNEUMATIC 3000 6500 LBS. REACH NEW HEIGHTS SPECIFICATIONS 8FGU15-32 8FDU15-32 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com CORE IC PNEUMATIC CAPACITY 3000 6500 LBS. MAXIMUM
More informationTechnical Data for 15/18/20/23BRP-9 I1 General Information
Technical Data for 15/18/20/23BRP-9 I1 General Information 1 Manufacturer 2 Model Manufacturer s Designation 3 Load Capacity * (1) Max. 4 Load Center Fork Face to Load CG 5 Power Unit 9 Operator 7 Tire
More informationBIG ON PULL lb. Towing Capacity mph Travel Speed Without Load 48-Volt AC Drive System
MID TOW TRACTOR BIG ON PULL 8800 13200 lb. Towing Capacity 8.4 11.2 mph Travel Speed Without Load 48-Volt AC Drive System Tight Turning Radius Stand-Up & Sit-Down Models CBT4-6 CBTY4 CLASS 6 ELECTRIC AND
More informationPOWRWORKERS PWD30/40 SE HWD30/40 SE. Walkie & Walkie/Rider Pallet Trucks Electric 24 Volt PWD/HWD30 SE PWD/HWD40 SE
POWRWORKERS Walkie & Walkie/Rider Pallet Trucks Electric 24 Volt PWD/HWD30 SE PWD/HWD40 SE 6,000 lbs 2725 kg 8,000 lbs 3635 kg PWD30/40 SE HWD30/40 SE CLARK THE FORKLIFT North America Germany Korea w w
More information*Photo may include optional equipment. 15/18/20BT-7 AC. FORKLIFT TRUCKS Environment Friendly
*Photo may include optional equipment. 15/18/20BT7 AC FORKLIFT TRUCKS Environment Friendly The New AC Control BT Series Designed with a durable frame and built to offer excellent stability and a smooth
More informationE30-40XN SERIES TECHNICAL GUIDE
E30-40XN SERIES TECHNICAL GUIDE WWW.HYSTER.COM E30-40XN DIMENSIONS 48 29 31 84 40 19 0 30 11 11 17 1 47 48 23 24 18.5 30 18 25 28 27 2 (length) Circled dimensions correspond to the line numbers on the
More informationGPC 3000 SERIES. Lifting Fork. Specifications Low Level Order Picker
C GPC 3000 SERIES Lifting Fork Specifications Low Level Order Picker C GPC 3000 Series Low Level Order Picker GPC 3045 Load backrest Backrest grab bar 4.22 2370 1200 1155 90 1415 1586 86 440 3.7 1025 160
More informationPE 4500 SERIES. Specifications End Control Pallet Truck
PE 4500 SERIES Specifications End Control Pallet Truck C PE 4500 Series End Control Pallet Truck Option 1 37.06" (940 mm) Option 2 33.75" (855 mm) 9" (228 mm) 90 36" (915 mm) 9.12" (232 mm) 16 7.3" (185
More informationE30-40HSD3 SERIES TECHNICAL GUIDE
E30-40HSD3 SERIES TECHNICAL GUIDE WWW.HYSTER.COM E30-40HSD 3 DIMENSIONS Front Leg Width Canopy Width 25.8" (656) 41.3" (1050) Rear Leg Offset 3.4" (85.8) 7 11 10 Std. 88 (2231) Opt. 83 (2108) Std. 78.3
More informationN30-45ZR 2 /ZDR 2 SERIES TECHNICAL GUIDE
N30-45ZR 2 /ZDR 2 SERIES TECHNICAL GUIDE WWW.HYSTER.COM N35-45ZR 2 DIMENSIONS 3.9 (100) 24 4.6 (117) 5.0" (127) x 2.9" (74) 4.3 (109) 6.0 (152) x 3.9 (99) Chassis 42.8" (1087) O.H.G. Width 42.1 (1070)
More informationNR-DB/NDR-DB. REACH TRUCKS 3,000 3,500 4,000 lbs
NR-DB/NDR-DB REACH TRUCKS 3,000 3,500 4,000 lbs Yale NR/NDR-DB reach trucks combine the latest technology with improved performance to effectively meet the demands of high density warehousing. Operator's
More informationRPXB Series. power. Walkie/Rider Pallet Truck Models 6,000 & 8,000 LB. CAPACITIES 24-VOLT MODELS USING AC TECHNOLOGY
RPXB Series Walkie/Rider Pallet Truck Models 6,000 & 8,000 LB. CAPACITIES 24-VOLT MODELS USING AC TECHNOLOGY power Performance. Comfort. Value. Every detail of Barrett Industrial Trucks series of AC-powered
More informationRD 5700 SERIES. Specifications Narrow-Aisle Reach Truck
RD 5700 SERIES Specifications Narrow-Aisle Reach Truck C RD 5700 Series Narrow-Aisle Reach Truck 4" (102 mm) 42" (1065mm) 9" (230 mm) 4" (102 mm) 20 1.8" (45 mm) Standard third post 4.1" (105 mm) Optional
More informationSRX Platinum Series. 3,000/3,500/4,500 lb. Capacities. Rider Reach, Rider Double Reach / AC-Powered Models
SRX Platinum Series Rider Reach, Rider Double Reach / AC-Powered Models 3,000/3,500/4,500 lb. Capacities SRX Platinum Series Mast Specifications SRX35N THREE STAGE Mast Type (Full Free) Mast OHG Maximum
More informationES 4000 SERIES. Specifications Pedestrian Stacker
C ES 4000 SERIES Specifications Pedestrian Stacker C ES 4000 Series Pedestrian Stacker brake brake override drive brake * battery roll out height ES 4000 Series Specifications Misc. Motors Performance
More informationRR 5700 SERIES. Specifications Narrow-Aisle Reach Truck
RR 5700 SERIES Specifications Narrow-Aisle Reach Truck Narrow-Aisle Reach Truck 4" (102 mm) 42" (1065mm) 9" ( 230 mm) 20 4" (102 mm) *5.5" (140 mm) 1.8" (45 mm) Standard third post 4.1" (105 mm) Optional
More informationTugger 10,000lb(4,500kg) Towing Capacity BWT45S-7 Center Control Rider 6,500lb(3,000kg) Capacity BWC33S-7
www.doosanlift.com Tugger 10,000lb(4,500kg) Towing Capacity BWT45S-7 Center Control Rider 6,500lb(3,000kg) Capacity BWC33S-7 Cultivating People Doosan s leadership course, Doosan Leadership Institute (DLI),
More information15/18/20BT-7 AC FORKLIFT TRUCKS Environmentally - Friendly
Dimension Specification Identification 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 8 1. 9 Manufacturer Manufacturer's type designation Drive : electric(battery or mains),diesel, petrol,fuel gas, manual Type of operation
More informationCenter Control Rider 6,500lb(3,000kg) Capacity BWC33S-7 Tugger 10,000lb(4,500kg) Towing Capacity BWT45S-7
www.doosanlift.com Center Control Rider 6,500lb(3,000kg) Capacity BWC33S-7 Tugger 10,000lb(4,500kg) Towing Capacity BWT45S-7 Cultivating People Doosan s leadership course, Doosan Leadership Institute (DLI),
More informationHIGH-CAPACITY ADJUSTABLE WHEELBASE
HIGH-CAPACITY ADJUSTABLE WHEELBASE 15000 80000 LBS. SPECIFICATIONS T HDA15/25 T HDA25/35 T HDA40/60 T HDA60/80 CLASS 4 INTERNAL COMBUSTION ENGINE CUSHION TIRE ToyotaForklift.com HIGH-CAPACITY ADJUSTABLE
More informationRC 5500 SERIES. Specifications Stand-Up Rider Lift Truck
RC 5500 SERIES Stand-Up Rider Lift Truck Stand-Up Rider Lift Truck 4" (100 mm) 42" (1065 mm) 8" (205 mm) 33" (840 mm) 21 48" (1220 mm) 88" (2235 mm) Standard - 79.4" (2015 mm) Head Clearance 84.5" (2145
More informationLARGE IC PNEUMATIC SPECIFICATIONS LBS. REACH NEW HEIGHTS CLASS 8FGU FDU60-80 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE
LARGE IC PNEUMATIC 13500 17500 LBS. REACH NEW HEIGHTS SPECIFICATIONS 8FGU60-80 8FDU60-80 CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMATIC TIRE ToyotaForklift.com LARGE IC PNEUMATIC CAPACITY 13500 17500 LBS.
More informationHyster Company s low level materials handling equipment comes full-circle with the evolutionary W65Z Walkie Pallet Truck.
Hyster Company s low level materials handling equipment comes full-circle with the evolutionary W65Z Walkie Pallet Truck. The many benefits of Hyster Company s heritage are clearly revealed in the well
More informationNR-DA/NDR-DA Reach Trucks
NR-DA/NDR-DA Trucks 3,000 3,500 4,000 lbs Yale NR/NDR-DA reach trucks combine the latest technology with improved performance to effectively meet the demands of high density warehousing. Operator's compartment
More informationSpecifications. RR 5200 Series. Narrow-Aisle Reach Truck RR Series
C Specifications RR 5200 Series Narrow-Aisle Reach Truck RR 5200 Series C RR 5200 Series Narrow-Aisle Reach Truck 4" 42" 8" w/side shift 12" w/o side shift 20 4" 5.5" 35/40-5.5" 45-6" 4.25" 27" w/side
More informationGPC 3000 SERIES. Specifications Low Level Order Picker
GPC 3000 SERIES Specifications Low Level Order Picker C GPC 3000 Series Low Level Order Picker GPC 3060 Rear Work Assist Accessory Tube Load Backrest Backrest Grab Bar 45.7" (1160 mm) 48.2" (1225 mm) 40.4"
More informationAC_new_en :07 Pagina 1. Photo may include optional equipment. 35/40/45/50B-7 AC. FORKLIFT TRUCKS Environmental - Friendly
3540457AC_new_en 3002008 11:07 Pagina 1 Photo may include optional equipment. 35/40/45/50B7 AC FORKLIFT TRUCKS Environmental Friendly 3540457AC_new_en 3002008 10:43 Pagina 2 New Criterion of Forklift Trucks
More informationTHINK INSIDE THE BOX
LARGE IC CUSHION BOX CAR SPECIAL THINK INSIDE THE BOX 8000 12000 lb. Capacity Mast Height Under 90 in. Vertically Extended Counterweight 20% More Fuel Efficient 8FGC35U-55U-BCS CLASS 4 INTERNAL COMBUSTION
More informationEngineered for performance.
TC 3000 SERIES Engineered for performance. When your material flow depends on a tow truck, there is no better choice than the reliable and durable TC 3000 Series designed from the ground up to deliver
More informationST 3000 SX 3000 Series. Specifications ST/SX 3000 Series Pedestrian Powered Stacker
ST 3000 SX 3000 Series Specifications ST/SX 3000 Series Pedestrian Powered Stacker ST 3000 SERIES STACKER 712 4.25 4.26 4.21 810 4.35 4.22 437 Drive Zone Brake Override 4.4 4.5 4.3 4.2 4.9 675 42.4% 40
More informationHEAVY-DUTY GROUND SUPPORT
LARGE TOW TRACTOR HEAVY-DUTY GROUND SUPPORT 44100 55100 lb. Towing Capacity 15.6 17.5 mph Travel Speed Without Load 80-Volt AC Drive System Tight Turning Radius 2TE15 2TE18 CLASS 6 ELECTRIC AND INTERNAL
More informationMID IC PNEUMATIC REACH NEW HEIGHTS
MID IC PNEUMIC REACH NEW HEIGHTS 8000 11000 LBS. SPECIFICIONS 8FG35U-50U 8FD35U-50U CLASS 5 INTERNAL COMBUSTION ENGINE PNEUMIC TIRE ToyotaForklift.com MID IC PNEUMIC CAPACITY 8000 11000 LBS. MAXIMUM FORK
More information3,000 6,000 LB CAPACITY ELECTRIC WALKIES
3,000 6,000 LB CAPACITY ELECTRIC WALKIES Quality Reliability Customer Service, MODEL RATED CAPACITY VOLTAGE TRAVEL SPEED BATTERY FORK WIDTH MAX FORK (LBS) LOADED /EMPTY COMPARTMENT* HEIGHT WP3000 3,000
More informationSpecifications. SHR 5500 Series. Heavy-Duty Walkie Reach Stacker SHR Series
C Specifications SHR 5500 Series Heavy-Duty Walkie Reach Stacker SHR 5500 Series C SHR 5500 Series Heavy-Duty Walkie Reach Stacker 80 4.13" 4" 36" 8" 32" 16 15 4.13" 5.5" (1) o 10.5" x 4" 4.13" (2) o 4"
More informationB60Z AC SERIES WALKIE/RIDER MOTORIZED HAND PALLET TRUCK
B60Z AC SERIES WALKIE/RIDER MOTORIZED HAND PALLET TRUCK WWW.HYSTER.COM NEED TO MOVE MORE LOADS WITH LESS EFFORT? The B60Z AC series of hand pallet trucks helps you work smarter with exceptional maneuverability
More informationHYUNDAI 20B-7 ELECTRIC SEATED 2, ,440 3,300 4,724/576 1,513/1,787. SE 200/ x6-8 2x/ ,780
Dimension Specification Identification 1. 1 1. 2 1. 3 1. 4 1. 5 1. 6 1. 8 1. 9 Manufacturer Manufacturer's type designation Drive : electric(battery or mains),diesel, petrol,fuel gas, manual Type of operation
More informationSTRONG PARTNERS. TOUGH TRUCKS. TM. Technical Guide. Counterbalanced Electric, Cushion Tire
STRONG PARTNERS. TOUGH TRUCKS. TM Technical Guide Counterbalanced Electric, Cushion Tire E80-120XN DIMENSIONS 29 48 30 19 40 10 b11 10 C 30 11 11 17 SIP 16 6º 23 48 6 100 * 18 49 24 25 28 ** 26 27 (length)
More informationToyota is the number one selling lift truck in the United States.
15665.new 3/9/04 8:21 PM Page 1 Thanks to advanced technology such as the Transistor Control System with MOSFET and a world renowned production system, Toyota lift trucks are known for their quality, dependability
More informationMPC 3000 SERIES. Specifications Order Picker with Mast
MPC 3000 SERIES Specifications Order Picker with C MPC 3000 Series Order Picker with OHG only on lift heights of 70" or more 34 30 32 33 20 6.3" (160 mm) 5.1" (130 mm) 2" (50 mm) 2.4" (61 mm) 20.3" (515
More informationWLX Series. Electric Walkie Pallet Truck. 24 Volt AC-Powered 4,500 lbs. Capacity
R WLX Series Electric Walkie Pallet Truck 24 Volt AC-Powered 4,500 lbs. Capacity R R WLX Series Applications Assembled in Marengo, IL and designed from the ground up based on end-user input, the WLX Series
More information