Motor doesn t assist

Transcription

1 Motor doesn t assist Put the console onto diagstic mode (see procedures) Does the motor odometer work? Verify connections that goes towards the motor See procedures Display in diagstic mode Does the motor odometer works? Select the max assist (level 4). Test the system See procedures Display in diagstic mode While the person is pedaling verify the strength gage (max value 25) Change the cabling and test the motor wheel Non Does the motor odometer work? Call us to fill a nconformity form Return the motor wheel for Return the motor for Return the defective cabling End Call us to fill a n Call us to fill a n

2 Motor gives strikes Verify all connections that goes to the motor Is the battery fully charged? (voltage > 26v) Fully charge the battery and re-test Is any connection damaged? Put the console in diagstic mode (see procedure) See procedure in diagstic mode display Change defective cabling Put it on maximum assist ( level 4) Is the problem solved? Verify the battery voltage See diagstic mode display Is the voltage < 20v Return the battery for Return the motor for Call us to fill a n Call us to fill a n Fin

3 FULL THROTTLE Put the console in diagstic mode (see procedures) See procedure in diagstic mode display Select the maximum assist level (4) and try the bicycle Check if the gage signal goes down to 0 when you stop pedaling Return the motor for Call us to fill a n Does the motor turn full throttle? It is intermittent

4 Console does t display properly See user guide Verify the console contrast: chro +/- Is the display problem fixed? Is the console cracked? Return the console for or replacement Press every button and check display Return the console for or replacement Is the display fixed?

5 System does t turn on Is the battery connected on the bike? Does it turn on? Unplug the battery and put it back again Return motor for Replace the console and test the system again Does it work w? Does it turn on? Return the original console for Is the battery db7 connector is decentered or damaged? Replace the cabling and test the system again Return the battery AND cabling for oui Put ather battery and test the system Does it turn on? Return cabling for Return battery for Does it turn on? n Put the original battery on the bike and unplug the motor connections

6 Battery does t accept any charge, the light does t turn on (for Ni-MH batteries only) Verify if the charger is well connected (wall and battery) Is the charger working? See procedures in diagstic mode display Check the battery voltage Is the voltage < 5v? Return battery for Check the thermistor value Call us with the value

7 Console does t show battery status Is the battery frame displayed? Does the system turn on and off rmally with the MODE button? 01 Check the battery voltage See procedure in diagstic mode display Is the voltage < 24v? Call us to fill a n Return the battery for Fully charge the battery and recheck Check for voltage value Call us to fill a n Return console for Does the console show full charge? Is the voltage > or = to 27,5v? Fully charge the battery and recheck Does the console show full charge? Calibrate the battery by pressing on MODE for 20 seconds Does the console show full charge? Charge the battery with ather charger Return the battery for Does the console show full charge? Is the voltage > or = to 27,5v?

8 01 Take the battery off the slider and put it back Is the battery frame displayed? Check the console black connector (COMM) Is the battery frame displayed? Replace console Is the battery frame displayed? Replace cabling Return battery for Call us to fill a n Is the battery frame displayed? n