English/Chinese/Japanese /Korean iscan-ii FORD V3.01 / V2.03 / V1.05 English/Chinese
|
|
- Abraham Hill
- 6 years ago
- Views:
Transcription
1 Back to Main Trade Show AAAE 2011 Australian Auto Aftermarket Expo May 12 - May 14, 2011 Melbourne Exhibition Centre, Australia Booth Number: F14F Automechanika Middle East 2011 June 7 - June 9, 2011 Dubai International Conventional and Exhibition Centre, Dubai, UAE We look forward to greeting you there! iscan-ii / D91 Latest Versions (March, 2011) iscan-ii TOYOTA V4.00 English/Chinese/Japanese iscan-ii CHRYSLER V4.00 English/Chinese iscan-ii KIA V3.02 English/Chinese IMS2-MB ADD-ON V4.04 English/Chinese iscan-ii BMW V4.00 English/Chinese/Japanese /Korean iscan-ii FORD V3.01 / V2.03 / V1.05 English/Chinese iscan-ii VASS V4.00 / V3.01SJP1 / V2.02SP3 / V1.06SP3 English/Chinese/Japanese iscan-ii IMS2-BMW V3.00 English/Chinese iscan-ii IMS2-TYT(US ModelOnly) V1.04 English/Chinese iscan-ii IMS2-MB V4.02 English/Chinese/Japanese D91-VASS V7.01SP1 / V6.02SP3 / V6.52SP3 English/Chinese/Japanese VeDiS Yearly Update Project (YUP) Software Software releases monthly for D91-EURO PRO YUP 2011 / D91-ASIAN PRO YUP YUP customers, please get the updates from website.
2 Technical Guidance BMW: Register Battery Replacement Register battery replacement BMW after model E65, it is essential to register the battery replacement after replacing or disconnecting the battery. The main function is to inform the power management that the battery has been replaced. The engine ecu has the record of the specification of the equipped battery. So, it is necessary to program the battery capacity and battery type (AGM). If it fails to do the registration, the vehicle electrical system will still be programmed to the old battery and may not provide the battery with enough charging power to operate the car. Functions of battery replacement registration 1. Record the kilometer of the existing battery 2. Clear the present saved values (charging status, battery voltage, current, and temperature...) 3. Initialise the setting of power management Battery capacity and battery model: Battery capacity: it can be found on the sticker of the battery Battery type: AGM battery can be recoginzed from its black shell BMW: Equipment Fuction Setup of F-Series Models (Car window intialise, Sliding/tilting sunroof initialise, Boot lid initialization, and Normalization longitudinal seat ) Items to be initialised The timing to be initialised Items to be learned. Not initialised 1. After programming FRM 1. Normalization: upper end position 1. Activation of power window is abnormal Power window 2. After disconnecting the power supply 2. Characteristic curve learning: the characteristic curve of opening and closing the electric current 2. No one-touch and anti-pinch function 3. After repairing / replacing the concerned units 3. One-touch and anti-pinch function 1. After programming SHD 1. Normalizaion: end positon of sliding sunroof 1. Activation of sliding sunroof is abnormal Sliding sunroof 2. After disconnecting the power supply 2. One-touch and anti-pinch function 2. No one-touch and anti-pinch function 3. After repairing / replacing the concerned units Boot lid After repairing / replacing the concerned units (boot lid lifter control unit) End positon of boot lid (manual button) Opening angle of boot lid is abnormal Seat 1. After disconnecting the power supply 2. After repairing / replacing the 1. Normalizaion: end positon of seat 2. Adjustment: force limit of seat Activation of seat is abnormal
3 concerned units (seat control unit) Example 1: Year 2010, BMW F10 523I, register battery replacement Example 2: Year 2010, BMW F02 740LI, equipment function setup Procedures on iscan-ii: Example 1: Year 2010, BMW 523I, Register battery change 1. Select Vehicle Diagnostic -> select EUROPEAN 1 2 MENU Vehicle Diagnostic 1 Vehicle Diagnostic 2 Component Test System (External Modules) 3 IMS 2 (Interface Module Simulation System) 10 OBD-II Standard Compliant iscan-ii(v2.01)usen 20 SETUP 1 [ASIAN] 2 [EUROPEAN] 3 [USA] 2. Select BMW Diag software 3 4 EUROPEAN 1 [BMW GT2] 2 [VASS] 3 [OPEL] 4 [FRENCH PKG] 5 MB iscan-ii(v4.00)usen 6 PORSCHE iscan-ii(v3.02sp1)usen 7 VOLVO iscan-ii(v3.01)usen BMW GT2 1 BMW Diag iscan-ii(v4.00)usen 2 BMW CODING iscan-ii(v3.03)usen 3 BMW SSS iscan-ii(v3.02)usen 4 MINI iscan-ii(v3.01)usen 3. Select Equipment Function Setup, then select Register battery change 5 6 System 1 1 Series 2 3 Series 3 5 Series Function Service 1 Car window initialise 2 Sliding/tilting sunroof initialise
4 4 6 Series 5 7 Series 6 8 Series 7 X Series 8 Z Series 77 Equipment Function Setup 88 Service Reset 99 Coding/Programming 100 Flat Tire Monitor 3 Register battery change 4 Steering angle 5 AFS initialization/ 6 Boot lid initialization 7 Normalization, longitudinal seat 4. Select F01/F02/F03/F04/F07/F10/F11/F18, then select Display history of battery replacement 7 8 Battery 1 E60/E63/E87/E90 2 E65 3 E70/E71 4 F01/F02/F03/F04/F07/F10 F11/F18 1 Display history of battery replacement 2 Register battery replacement 5. Please check the battrey capacity and the last battery replacement 9 Attention!! Note! If another battery capacity or another battery was retrofitted recently, the new battery capacity is only displayed correctly in the diagnosis ater a terminal change. Note! The history of the last battery change is deleted during programming by in the engine electronics (DME or DDE). 10 Display history (1/1) Currently registered battery capacity 90 Ah Last battery replacement Second last battery replacement 0 km 0 km Press EXIT to break 6. Select Register battery replacement Display history of battery Register battery (1/2) The battery replacement is entered in the DME/DDE in the next test
5 replacement 2 Register battery replacement step! The engine does not have to be running and terminal 15 ON Attention! The entry cannot be cancelled! Currently registered battery capacity 90 Ah 7. If the battery replacement is same capacity, select Enter battery replacement: same capacity. The battery replacement has been successfully registered DME/DDE Register battery (2/2) 1 Enter battery replacement: same capacity 2 Enter battery replacement: higher/lower capacity 3 Enter battery replacement: replacement for AGM battery 4 Cancel complete!! Battery replacement successfully registered in DME/DDE. The following is now entered in DME/DDE: Last battery replacement: 0 km Second last battery replacement: 0 km Press EXIT to break Example 2: Year 2010, BMW F02 740LI, equipment function setup Car window initialise 1. Select BMW Diag software, select Equipment Function Setup 15 BMW GT2 1 BMW Diag iscan-ii(v4.00)usen 2 BMW CODING iscan-ii(v3.03)usen 3 BMW SSS iscan-ii(v3.02)usen 4 MINI iscan-ii(v3.01)usen 16 System 1 1 Series 2 3 Series 3 5 Series 4 6 Series 5 7 Series 6 8 Series 7 X Series 8 Z Series 77 Equipment Function Setup 88 Service Reset 99 Coding/Programming 100 Flat Tire Monitor 2. Select Car window initialise, select F01/F02/F03/F04/F07/F10/F11/F
6 Function Service Initialise Service 1 Car window initialise 2 Sliding/tilting sunroof initialise 3 Register battery change 4 Steering angle 5 AFS initialization/ 6 Boot lid initialization 7 Normalization, longitudinal seat 1 E60/E63 2 E65 3 E70/E71 4 E87/E90 5 F01/F02/F03/F04/F07/F10 F11/F18 3. Follow the messages shown on the screen Message!! (1/2) Message!! (2/2) You can initialise the power windows as follows using the diagnostics procedure. Connect the battery charger to the vehicle before performing the initialisation. Close all vehicle doors. The relevant power window is activated during initialisation. The power window will be denormalised and subsequently reinitialised. 4. Select the door to be initialised Select the window Lift 1 Driver's door 2 Front passenger door 3 Driver's and front passenger door 4 Driver's side, rear 5 Passenger's side, rear 6 Driver's passenger side, rear 7 End test module Attention!! Do you want to start the initialization of the driver's door power window regulator? Prompt: The window is being opened and closed 1 Yes 2 No 5. During the initialisation procedure, the door window will be opened and closed
7 Adjustment!! The initialisation procedure has started. The window will be denormalised and subsequently reinitialised. The driver's door window will be opened and closed. CHECK!! Once the initialisation procedure is complete, check whether you can open and close the driver's door window in automatic mode without a fault occurring (toll function). Sliding/tilting sunroof initialise 6. Select Sliding/tilting sunroof initialise, and select F01/F02/F03/F04/F07/F10/F11/F Function Service Initialise Service 1 Car window initialise 2 Sliding/tilting sunroof initialise 3 Register battery change 4 Steering angle 5 AFS initialization/ 6 Boot lid initialization 7 Normalization, longitudinal seat 1 E60/E63 2 E65 3 E70/E71 4 E87/E90 5 F01/F02/F03/F04/F07/F10 F11/F18 7. Select Perform initialisation, then switch terminal 15 and terminal R off and on Select Note! Important: This function is used to learn the slide/tilt sunroof. 1 Perform initialisation 2 End service function Switch terminal 15 and terminal R off and on again! Otherwise, initialisation may not be carried out correctly. 8. Sliding/tilting sunroof initialisation was finished successfully
8 Teach-in precedure... Initialisation was finished successfully without faults. Boot lid initialiization 9. Select Boot lid initialization, then select F01/F02/F04/F Function Service Initialise Service 1 Car window initialise 2 Sliding/tilting sunroof initialise 3 Register battery change 4 Steering angle 5 AFS initialization/ 6 Boot lid initialization 7 Normalization, longitudinal seat 1 F01/F02/F04/F Follow the instructions shown on screen to proceed Note! This service function should be carried out after replacing one or both boot lid lift drive units. Control unit boot lid lift is reset to delivery status in the next test step. Note! Close boot lid! Use button to operate the boot id. The boot lid is reinitialised. The initialisation status is output in the next test step. 11. The initialisation status will change from Not initialised to Initialisation OK status status Note: use button to operate the Note: use button to operate the
9 boot id. Initialisation status: Not initialised boot id. Initialisation status: Initialisation OK Normalization, longitudinal seat 12. Select Normalization, longitudinal seat, then select F01/F02/F04/F07/F10/F Function Service Seat calibration 1 Car window initialise 2 Sliding/tilting sunroof initialise 3 Register battery change 4 Steering angle 5 AFS initialization/ 6 Boot lid initialization 7 Normalization, longitudinal seat 1 F01/F02/F04/F07/F10/F Select the seat to be normalized. 39 Seat calibration 1 Normalization, driver's side 2 Normalization, passenger's side (if fitted) 3 Normalization, driver's side, rear (if fitted) 4 Normalization, passenger's side rear (if fitted) 40 Attention (1/2) Information of seat calibration: -Only carry out seat standardisation on a fault-free system -Make sure that the vehicle voltage is >10.5V -Adjustment travel must be unimpeded -Do not operate the switch for front and rear seat -There is no fault memory monitoring during the procedure 14. Select Start calibration Attention! (2/2) Important: The anti-trap 1 Start calibration
10 mechanism is not active during the process for limiting excess force! 2 End service function 15. The status of adaptation will change from No adaptation to Adaptation OK Message!! Status of adaptation run of excess force limitation: -Adaptation of excess force limitation, forward No adaptation -Adaptation of excess force limitation, back No adaptation Message!! Status of adaptation run of excess force limitation: -Adaptation of excess force limitation, forward Adaptation OK -Adaptation of excess force limitation, back Adaptation OK 16. If the value of data stream and seat are okay, select Calibration and successful Message!! 1 Calibration and successful 2 Calibration and not successful Calibration and finished. Press EXIT to break 17. If the value of data stream and seat are not okay, select Carlibration and not successful, and check if SMFA module has been reprogrammed Calibration and successful 2 Calibration and Has the SMFA-driver's side seat module already been reprogrammed?
11 not successful 1 Yes 2 No 18. Select Yes, replace SMFA-driver's side seat module. Select No, reprogram SMFA-driver's side seat module Message!! Message!! Replace following component: SMFA-driver's side seat module Press EXIT to break Reprogram SMFA-driver's side seat module Press EXIT to break
1. Normalization: upper end position. 2. Characteristic curve learning: the characteristic curve of opening and closing the electric current
Technical Guidance BMW: Register Battery Replacement Register battery replacement BMW after model E65, it is essential to register the battery replacement after replacing or disconnecting the battery.
More informationBack to Main. Trade Show
Back to Main Trade Show Automechanika Frankfurt 2010 September 14 - September 19, 2010 Messe Frankfurt GmbH -- Ludwig-Erhard-Anlage 1, 60327 Frankfurt am Main Hall & Booth Number: Hall 9.0 E92 AAPEX 2010
More informationBack to Main. Trade Show. AUTO MAINTENANCE+REPAIR 2009 Feb. 25th - 28th, 2009 New China International Exhibition Center, Beijing Booth No: 2258
Back to Main Trade Show AUTO MAINTENANCE+REPAIR 2009 Feb. 25th - 28th, 2009 New China International Exhibition Center, Beijing Booth No: 2258 I) AMPA 2009 Taipei Int'l Auto Parts & Accessories April 14th
More information2017 Automechanika Dubai EXHIBITION DATES MAY 07 - MAY 09, 2017 Dubai International Convention and Exhibition Centre Booth Number: SA-C51
Download PDF Exhibition 2017 Automechanika Dubai EXHIBITION DATES MAY 07 - MAY 09, 2017 Dubai International Convention and Exhibition Centre Booth Number: SA-C51 2017 Automechanika Birmingham EXHIBITION
More informationBack to Main. Trade Show
Back to Main Trade Show The 9th International Auto Aftermarket Expo 2010 (JAPAN) March 18 - March 20, 2010 Tokyo Big Sight, West Hall 1 Booth No. 1093 The 53th Auto Maintenance & Repair Expo 2010 (CHINA)
More informationTrade Show. Latest Versions (May, 2012)
Trade Show Automechanika Messe Frankfurt 2012 Sep. 11 - Sep 16, 2012 Messe Frankfurt GmbH Fair Ground, Germany Booth Number: coming soon AAPEX 2012 October 30 - November 1, 2012 Sands EXPO Center, Las
More information2017 Automechanika Kuala Lumpur EXHIBITION DATES MARCH 23 - MARCH 25, 2017 Kuala Lumpur Convention Centre Booth Number: 1J01
Download PDF Exhibition 2017 Automechanika Kuala Lumpur EXHIBITION DATES MARCH 23 - MARCH 25, 2017 Kuala Lumpur Convention Centre Booth Number: 1J01 AMR 2017 EXHIBITION DATES MARCH 30 - APRIL 02, 2017
More informationiscan-ii New Generation Scanner, Big Colorful Screen, Total Diagnostic Solution
Back to Main Trade Shows Exhibited at Taipei AMPA Show in April Frankfurt 2008 Leading International Trade Fair for the Automotive Industry Sep 16 - Sep 21, 2008 Germany Booth No. Hall 9.1 A10 Welcome
More information2017 Automechanika Kuala Lumpur EXHIBITION DATES MARCH 23 - MARCH 25, 2017 Kuala Lumpur Convention Centre Booth Number: 1J01
Download PDF Exhibition 2017 Automechanika Kuala Lumpur EXHIBITION DATES MARCH 23 - MARCH 25, 2017 Kuala Lumpur Convention Centre Booth Number: 1J01 AMR 2017 EXHIBITION DATES MARCH 30 - APRIL 02, 2017
More informationAMR 2016 EXHIBITION DATES:MARCH 03 MARCH 06, 2016 New China International Exhibition Center (NCIEC), Beijing, China Booth Number: E2A21
Trade Show AMR 2016 EXHIBITI DATES:MARCH 03 MARCH 06, 2016 New China International Exhibition Center (NCIEC), Beijing, China Booth Number: E2A21 2016 TAIPEI AMPA 2016 TAIPEI AMPA EXHIBITI DATES:APRIL 06
More informationAAPEX 2017 EXHIBITION DATES OCTOBER 31 - NOVEMBER 02, 2017 Sands EXPO Center, Las Vegas, NV, USA Booth Number : 668
Download PDF Exhibition AAPEX 2017 EXHIBITION DATES OCTOBER 31 - NOVEMBER 02, 2017 Sands EXPO Center, Las Vegas, NV, USA Booth Number : 668 2017 Automechanika Shanghai EXHIBITION DATES NOVEMBER 29 - DECEMBER
More informationLatest Versions (July, 2013)
Latest Versions (July, 013) Software Version Language Release date BMW ENCODING DATABASE 013.06 013/6/5 BMW F-CIP 013.06 USEN/TWCH 013/6/5 BMW PROGRAMMING 013.06/01.1SP1 USEN/TWCH 013/6/5 CHRYSLER 013.05/01.1SP1
More informationTrade Show. Latest Versions (September, 2012)
Trade Show Automechanika Messe Frankfurt 2012 Sep. 11 - Sep 16, 2012 Messe Frankfurt GmbH Fair Ground, Germany Hall 9.2 Booth No. G19 AAPEX 2012 October 30 - November 1, 2012 Sands EXPO Center, Las Vegas,
More informationHolden VZ 3.6L ECU & Powertrain Interface Module Linking Instructions
Holden VZ 3.6L 2004-2006 ECU & Powertrain Interface Module Linking Instructions Contents Page In Brief PIM Replacement, ECM Replacement 2 VZ 3.6L System Overview 3 PIM Functions 4 PIM Location 4 ECM Functions
More informationES910 BMW SCANNER USER S MANUAL BMW MINI Rolls-Royce
www.autophix.com ES910 BMW SCANNER USER S MANUAL BMW MINI Rolls-Royce Table of Contents SAFETY PRECAUTIONS ABOUT ES910 1. Coverage 2. Other Features & Benefits 3. Includes 4. Appearance and Key Descriptions
More informationTechnical Service Information Bulletin
Technical Service Information Bulletin August 4, 2003 Title: Models: 02 03 ES 300 & 04 05 ES 330 REVISION NOTICE: April 1, 2005: 2004 2005 model year ES 330 vehicles have been added to Applicable Vehicles.
More informationINDEX. 2. Using the Scan Tool Tool Description Specifications Accessories Include Product Troubleshooting...
INDEX 1.Safety Precautions and Warnings...3 2. Using the Scan Tool...5 2.1 Tool Description... 5 2.2 Specifications... 6 2.3 Accessories Include... 6 2.4 Product Troubleshooting... 7 3. Software Function...9
More informationMINI Function list V10.41
Notes: MINI Function list V10.41 Functions marked with is fully supported and already exited in former software version. * Functions marked with * is fully supported and newly added in current software
More informationPERFORMANCE UPGRADE? I CHOOSE RACECHIP!
SIMPLY FASTER. PERFORMANCE UPGRADE? I CHOOSE RACECHIP! Nick Heidfeld has been brand ambassador for RaceChip Chiptuning since April 2017. He currently races in Formula E and was one of the most successful
More informationNanoDiag SMALL YET POWERFUL! TOTAL DIAGNOSIS QUICK AND SIMPLE PROFESSIONAL REDUCED SIZE
NanoDiag NanoDiag SMALL YET POWERFUL! TOTAL DIAGNOSIS QUICK AND SIMPLE PROFESSIONAL Vehicle repair workshops are confronted every day with more and more vehicles containing sophisticated electronic technology
More informationSAFETY PRECAUTIONS Warning: Read and understand all instructions in this manual. Use appropriate personal safety equipment including hearing and eye p
SAFETY PRECAUTIONS Warning: Read and understand all instructions in this manual. Use appropriate personal safety equipment including hearing and eye protections when using the scanner in or near the vehicle
More informationTechnical Service BULLETIN
Technical Service BULLETIN November 23, 2005 Title: Models: 03 & EG062-05 ENGINE Introduction Under certain driving conditions, some 2003 model year and vehicles equipped with a 2AZ FE engine may exhibit
More informationTable of Contents 1. INTRODUCTION GENERAL INFORMATION-ABOUT OBDII/EOBD PRODUCT DESCRIPTIONS OPERATIONS...11
Table of Contents 1. INTRODUCTION...1 2. GENERAL INFORMATION-ABOUT OBDII/EOBD...1 2.1 ON-BOARD DIAGNOSTICS (OBD) II...1 2.2 DIAGNOSTIC TROUBLE CODES (DTCS)...2 2.3 LOCATION OF THE DATA LINK CONNECTOR (DLC)...3
More information1. SAFETY PRECAUTIONS AND WARNINGS GENERAL INFORMATION...
Table of Contents 1. SAFETY PRECAUTIONS AND WARNINGS... 4 2. GENERAL INFORMATION... 5 2.1 ON-BOARD DIAGNOSTICS (OBD) II... 5 2.2 DIAGNOSTIC TROUBLE CODES (DTCS)... 5 2.3 LOCATION OF DATA LINK CONNECTOR
More informationService Training. Audi open sky sunroof systems. Self-Study Programme 378
Service Training Audi open sky sunroof systems Self-Study Programme 378 Contents Audi A2 roof Glass roof panels - explosion drawing................................... 5 Glass roof panel 2 closed...............................................
More informationAbrites Diagnostics for Peugeot/ Citroën User Manual abrites.com
abrites.com 1 List of Revisions Date 19.Oct.2010 Chapter ALL 22. Oct.2010 1 Description First version of the document. Revision 1.0 Added information for 25-to-25 pin adapter 1.1 Clear Fault log 1.1 2.2.3
More informationTechnical Information
Technical Service 2/14 ENU WE02 9 WE02 - Re-programming Instrument Cluster (Workshop Campaign) Important Note: CRITICAL WARNING - THIS CAMPAIGN INCLUDES STEPS WHERE SEVERAL CONTROL UNITS IN THE VEHICLE
More informationINDEX. 1.Safety Precautions and Warnings...3
INDEX 1.Safety Precautions and Warnings...3 2. General Information...5 2.1 On-Board Diagnostics (OBD) II... 5 2.2 Diagnostic Trouble Codes (DTCs)... 6 2.3 Location of the Data Link Connector (DLC)...7
More informationTOYOTA / LEXUS / SCION OBDII / 17-pin / 23-pin, CAN / non-can protocol, Diagnosis / Live Data / Work Support / Activation / Adaptation
TOYOTA / LEXUS / SCION 1991 2011 OBDII / 17-pin / 23-pin, CAN / non-can protocol, Diagnosis / Live Data / Work Support / Activation / Adaptation Version: V4.01 Date: March, 2011 OBD-II for TOYOTA / LEXUS
More information1st to 2nd Gear Upshift Shudder
T-SB-0089-2 June 5, 202 Service Category Drivetrain Section Automatic Transmission/Transaxle Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 200 202 Drive Type(s):, Engine(s): GR Transmission(s):
More informationTitle: TCM CALIBRATION UPDATE: M.I.L. ON DTC P2716 Models: 07 Camry (2GR -FE, 6 -Speed A/T)
Technical Service BULLETIN December 12, 2006 Title: TCM CALIBRATION UPDATE: M.I.L. ON DTC P2716 Models: 07 Camry (2GR -FE, 6 -Speed A/T) TSB REVISION NOTICE: S January 12, 2007: Production Change has been
More informationSmart Sensor Pro+ User Guide
Smart Sensor Pro+ User Guide Important Information FCC Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful
More informationImportant instructions
Operation manual Please read this manual, before starting the unit. It contains important notes on commissioning and handling. Keep these instructions for future reference. Be careful even if you pass
More informationMI6 overview - for Mini vehicles
MI6 Version Specifications MI6 overview - for Mini vehicles Since 1988, N.V. ADS Carsoft International, develops alternatives to factory diagnostic systems. The Carsoft MI6 package developed and manufactured
More informationSPD DEVICE USER MANUAL V1.2.
USER MANUAL V1.2 contact@sedox.com www.sedox-performance.com 1. Introduction Congratulations! With your new Sedox SPD Device you can now easily reprogram your car in a few minutes. Sedox SPD Device is
More informationKEYLESS ENTRY SYSTEM & TIRE PRESSURE MONITOR ACCESSORIES & EQUIPMENT General Motors Corp. - Remote Keyless Entry System
KEYLESS ENTRY SYSTEM & TIRE PRESSURE MONITOR 1998 ACCESSORIES & EQUIPMENT General Motors Corp. - Remote Keyless Entry System DESCRIPTION Remote Keyless Entry (RKE) system is controlled by Remote Function
More informationThe Complete TPMS Solution. Universal TPMS Sensors and Programming Tool. Pre-programmed Direct-Fit TPMS Sensors
The Complete TPMS Solution Universal TPMS Sensors and Programming Tool Accessories Pre-programmed Direct-Fit TPMS Sensors Training TPMS ZONE Our TPMS Zone website has been created as a comprehensive library
More informationREV F2.0. User's Manual. Hydraulic ABS (HABS) Hydraulic Power Brake (HPB) Page 1 of 28
REV F2.0 User's Manual Hydraulic ABS (HABS) Hydraulic Power Brake (HPB) Page 1 of 28 Table of Contents INTRODUCTION...4 Starting TOOLBOX Software... 5 MAIN MENU...6 System Setup... 6 Language... 7 Select
More informationMIL "ON" DTC P2195, P0138, and/or P0031
T-SB-0065-10 February 5, 2010 Service Category Engine/Hybrid System Section Engine Control Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2009 Corolla Engine(s): 2ZR Transmission(s):
More informationTitle: M.I.L. ON DTC P3191, P3190, AND/OR P0A0F Models:
Technical Service BULLETIN October 18, 2004 Title: M.I.L. ON DTC P3191, P3190, AND/OR P0A0F Models: 04-05 Prius EG047-04 ENGINE TSB REVISION NOTICE: S February 22, 2005: Applicable Vehicles has been updated
More informationOperation Method for Tire Sensor Calibration of 2014 Fiat Freemont
Page 1 of 12 Operation Method for Tire Sensor Calibration of 2014 Fiat Freemont Product model Date Number X-431 series 20161110 Applicable vehicle model: Fiat Freemont model Function Description: This
More informationOBDCheck VP39 OBDII/EOBD SCAN TOOL. User Manual. The Best Solution to Read & Erase Trouble Codes for OBD II Compliant Vehicles.
OBDCheck VP39 OBDII/EOBD SCAN TOOL User Manual The Best Solution to Read & Erase Trouble Codes for OBD II Compliant Vehicles. Table of Contents 1. Safety Precautions and Warnings...1 2. General Information
More informationAUTOBOSS V30 ELITE hand-held diagnostic tool developed for the European market - the true all-in-one scan tool.
AUTOBOSS V30 ELITE hand-held diagnostic tool developed for the European market - the true all-in-one scan tool. OEM COVERAGE FOR EUROPEAN/ASIAN/US VEHICLES Feature LARGE VGA COLOUR TOUCH SCREEN Software
More informationIf you ever have any questions, please contact our support team: cobbtuning.com/support
P. 1 HOW IT WORKS Welcome to the quick start guide for your new Accessport! This guide will give you a brief overview of how to use your device. Please visit cobbtuning.com/apsupport for the complete instruction
More informationConnection. 1. Diagnostic socket 2. Adaptor 3. Main cable 4. PC-MAX main unit 5. PC 6. Wireless adaptor
PC MAX Wireless VCI Connection 1. Diagnostic socket 2. Adaptor 3. Main cable 4. PC-MAX main unit 5. PC 6. Wireless adaptor PC-MAX offers --Over 40 makes, 1,000 vehicle system coverage, --including CANbus
More informationTHE witech SOFTWARE VERSION MUST BE AT **15.02** OR HIGHER TO PERFORM THIS PROCEDURE.
NUMBER: GROUP: 21-030-14 REV. A Transmission and Transfer Case DATE: October 24, 2014 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication
More informationEPAS Desktop Pro Software User Manual
Software User Manual Issue 1.10 Contents 1 Introduction 4 1.1 What is EPAS Desktop Pro? 4 1.2 About This Manual 4 1.3 Typographical Conventions 5 1.4 Getting Technical Support 5 2 Getting Started 6 2.1
More informationTHE DRBIII FLASH FILES FOR THIS BULLETIN ARE AVAILABLE ON DealerCONNECT.
NUMBER: GROUP: 18-006-04 REV. B Vehicle Performance DATE: September 13, 2004 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication
More informationOwners Manual for TPMS plus GPS
To ensure correct operation and service please read these instructions before installing and operating the TPMS feature of the TPMS/GPS unit. Owners Manual for TPMS plus GPS TABLE OF CONTENTS TIRE PRESSURE
More informationUser s Manual XOB15091 OBD II / EOBD CODE READER. All Rights Reserved. Warranty and Service
5. Warranty and Service 5.1 Limited One Year Warranty The manufacturer/supplier warranty provided to customers for this product will be free from all defects in materials and workmanship for a period of
More informationAlternative Fuel Engine Control Unit
1999 Chevrolet/Geo Cavalier (CNG) Alternative Fuel Engine Control Unit Table 1: AF ECU Function Parameters The (AF ECU) controls alternative fuel engine operation. The control unit monitors various engine
More informationLAUNCH Diagnostic Product Market Report
Product model Date Number: X-431 series 20161110 X-431 Actual Measurement: Operation Method for Tire Sensor Calibration of 2014 Fiat Freemont Applicable vehicle model Fiat Freemont model Function Description
More information2006 MINI Cooper ACCESSORIES & EQUIPMENT Audio, Navigation & Anti-Theft Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S
Fig. 1: Locating Radio Receiver Retaining Screws 2006 MINI Cooper 2002-05 ACCESSORIES & EQUIPMENT Audio, Navigation & Anti-Theft Systems - Repair Instructions - Cooper (1.6L) R50/W10 & Cooper S MONO RADIO
More informationI30 MIL "ON" WITH DTC P0420 STORED - THREE WAY CATALYST FUNCTION
Classification: Reference: Date: EC00-025b ITB00-054b June 7, 2004 2000-2001 I30 MIL "ON" WITH DTC P0420 STORED - THREE WAY CATALYST FUNCTION IMPORTANT: THIS BULLETIN HAS BEEN REVISED. The Service Information
More informationIf you ever have any questions, please contact our support team: cobbtuning.com/support
P. 1 HOW IT WORKS Welcome to the quick start guide for your new Accessport! This guide will give you a brief overview of how to use your device. Please visit cobbtuning.com/apsupport for the complete instruction
More informationTechnical Service BULLETIN
Technical Service BULLETIN April 6, 2007 Title: Models: 04 & EG07-07 ENGINE Introduction Under certain driving conditions, some 2004 model year and vehicles may exhibit a M.I.L. ON condition with DTC P033
More informationdated December SUBJECT BMW Maintenance Program: 12-Volt Battery Replacement Measure MODEL
SI B61 30 14 General Electrical Systems January 2015 Technical Service This Service Information bulletin supersedes SI B61 30 14 dated December 2014. designates changes to this revision SUBJECT BMW Maintenance
More informationTPMS Relearn Procedure - Chysler/Dodge/Jeep/RAM Applications Required Tools
TPMS Relearn Procedure - Chysler/Dodge/Jeep/RAM Applications Required Tools NONE Preparation Review all data in your owner's manual pertaining to the TPMS System Installation NOTE: This Step should be
More informationOBDII/EOBD Heavy truck Diagnostic tool. User manual. 2.8 Color display
OBDII/EOBD Heavy truck Diagnostic tool User manual 2.8 Color display Table of Contents 1. Safety Precautions and Warnings... 3 2. General Information... 4 2.1 About DTC... 4 2.2 J1708/J1587/J1939... 4
More informationMaxiscan CAN OBDII/EOBD
Maxiscan MS309 User's Manual CAN OBD 2 CODE READER Maxiscan Maxiscan CAN OBDII/EOBD Table of Contents 1. 2. 3. 4. 5. Safety Precautions and Warnings General Information 2.1 On-Board Diagnostics(OBD) II
More informationService Bulletin Immobilizer System (Type 6) (Supersedes , dated February 20, 2009; see REVISION SUMMARY) February 22, 2013
Service Bulletin 06-033 Applies To: 2007-09 MDX ALL 2007-12 RDX ALL February 22, 2013 Immobilizer System (Type 6) (Supersedes 06-033, dated February 20, 2009; see REVISION SUMMARY) REVISION SUMMARY This
More informationTechnical Service BULLETIN
Technical Service BULLETIN December 4, 2003 Title: Models: 03 4Runner BR005-03 BRAKES Introduction Some 2003 model year 4Runner vehicles may experience a VSC light ON condition and DTC C1203 in the Skid
More informationTIRE PRESSURE AND MONITORING SYSTEMS (DIAGNOSTICS)
TIRE PRESSURE AND MONITORING SYSTEMS (DIAGNOSTICS) Basic Diagnostic Procedure 1. Basic Diagnostic Procedure A: PROCEDURE CAUTION: Remove foreign matter (dust, water, oil etc.) from the tire pressure monitoring
More informationIssue 2.0 December EPAS Midi User Manual EPAS35
Issue 2.0 December 2017 EPAS Midi EPAS35 CONTENTS 1 Introduction 4 1.1 What is EPAS Desktop Pro? 4 1.2 About This Manual 4 1.3 Typographical Conventions 5 1.4 Getting Technical Support 5 2 Getting Started
More information2004 Honda Element EX DTC P2647: ROCKER ARM OIL PRESSURE SWITCH (VTEC OIL PRESSURE SWITCH) CIRCUIT HIGH VOLTAGE
DTC P2647: ROCKER ARM OIL PRESSURE SWITCH (VTEC OIL PRESSURE SWITCH) CIRCUIT HIGH VOLTAGE NOTE: Before you troubleshoot, record all freeze data and any on-board snapshot, and review the general troubleshooting
More informationTHE DRBIII FLASH FILES FOR THIS BULLETIN ARE AVAILABLE ON DealerCONNECT.
NUMBER: 18-042-14 GROUP: Vehicle Performance DATE: July 30, 2014 This bulletin is supplied as technical information only and is not an authorization for repair. No part of this publication may be reproduced,
More informationCARSOFT BMW MINI Ultimate Home V12 SPECIFICATIONS August 14, 2012 Release Specifications
CARSOFT BMW Ultimate Home V12 SPECIFICATIONS August 14, 2012 Release Specifications Carsoft International www.carsoftsales.com bmwhome@carsoftsales.com Tel: 32/19.54.54.29 Intro: Since 1988, Carsoft has
More informationMIL "ON" DTC P2195, P0138, and/or P0031
T-SB-0066-10 February 5, 2010 Service Category Engine/Hybrid System Section Engine Control Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2010 Corolla Engine(s): 2ZR Transmission(s):
More informationTable of Contents. 5. Warranty and Service...29
Table of Contents 1. Safety Precautions and Warnings...2 2. General Information 2.1 On-Board-Diagnostics (OBD) II......3 2.2 Diagnostic Trouble Codes (DTCs) 3 2.3 Location of the Data Link Connector (DLC)
More informationUltrascan OBDCAN PLUS
Ultrascan OBDCAN PLUS Table of Contents 1.Safety Precautions and Warnings 01 2. General Information 2.1 On-Board Diagnostics OBDII 2.2 Diagnostic Trouble Codes ( DTCs ) 2.3 Location of the Data Link Connector
More informationTOMORROW S TECHNOLOGY FOR TODAY S TECHNICIANS. Web:
TOMORROW S TECHNOLOGY FOR TODAY S TECHNICIANS Autel Product Range Code Readers AL301: OBD II & Can Code Reader FIRST GENERATION OF CODE READER DIAGNOSTICS Autelopens our range with the AL301 which is not
More informationTechnical Service BULLETIN
Technical Service BULLETIN February 8, 2005 Title: Models: 04 05 Camry (V6) EG009-05 ENGINE Introduction Under certain driving conditions, some 2004 and 2005 model year Camry vehicles may exhibit a M.I.L.
More informationDirector P. O. Box 1904 Service Engineering Operations Dearborn, Michigan Ford Customer Service Division
Michael A. Berardi Ford Motor Company Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan 48121 Ford Customer Service Division TO: All U.S. Ford and Lincoln Dealers August 26, 2014
More informationBMW Pass-Thru. Autologic 2016
BMW Pass-Thru Autologic 2016 Disclaimer This information is provided as a guide only and subject to change by the vehicle manufacturer. Autologic cannot be held responsible for any errors regarding manufacturer
More informationALTIMA; MIL ON P1273 (QR25 ENGINE) MAY BE CAUSED BY THE REAR O2 SENSOR
Classification: Reference: Date: EC05-016a NTB06-039a May 17, 2006 2004 2005 ALTIMA; MIL ON P1273 (QR25 ENGINE) MAY BE CAUSED BY THE REAR O2 SENSOR This bulletin has been amended. The Claims Information
More informationTechnical Service BULLETIN
Technical Service BULLETIN November 20, 2002 Title: Models: 01 02 Prius EG021-02 ENGINE Introduction Under certain driving conditions, some Prius vehicles may exhibit a Master, Hybrid and M.I.L. Warning
More informationTECHNICAL SERVICE BULLETIN
GROUP ENG MODEL 2015MY K900 (KH) NUMBER DATE 141 (REV 1, 04/25/2014) April 2014 TECHNICAL SERVICE BULLETIN This bulletin has been revised to include additional information. New/revised sections of this
More informationMODEL MVX-2011 TANK MOUNT SPEEDOMETER/TACHOMETER
MODEL MVX-2011 TANK MOUNT SPEEDOMETER/TACHOMETER Wiring Diagram The MVX-2011 gauges will work on 2011-up Softail models with 5 gauges or 2012-up Dyna models with 5 gauges. It is a direct plug in on these
More informationNOTE: THESE PROCEDURES ARE THE SAME AS BEING IN THE SERVICE MODE. NOTE: ONCE THE UNIT IS POWERED DOWN THE VALUES FOR C4 WILL BE GONE.
SERVICE CODES There are only two service codes that are accessible in a Users Mode. These are C4 (Unbalance Compensation) and C12 (Display Counter Indication). To access these service code in Users Mode
More informationQuick Start Guide Evinrude/Johnson Outboard Engines
Thank you for purchasing Candoopro! Please read the following information before using the system for the first time. If you have any questions about the use of the system, please contact us at Sales@candoopro.com,
More informationHuf Group. Your Preferred Partner for Tire Pressure Monitoring Systems
IntelliSens App Interactive Guide For Android & ios devices Revision 2.0 17.10.2016 Overview Function flow... 3 HC1000... 4 First Steps... 5 How to Read a Sensor... 7 How to Program a Sensor... 10 Program
More informationMINI V12.10 Diagnostics List(Note:For reference only)
Menu Special Driver Menu DME Digital Motor Electronics Special 1. Adaptations 2.DME/DDE-EWS adjustment 3.CO adjustment 4.Smooth running measurement 5.Tank Leakage System Check 6.Secondary Air System Check
More informationMINI V10.20 Diagnostics List(Note:For reference only)
MINI R50/R52/ R53 Driver Chassis DME Digital Motor Electronics EGS Transmission control EWS (Elec. immobilize system) ABS Antilock brake LEW (Steering angle sensor) RDC (Tyre pressure control) EHPS (Electrically
More informationAbnormal Noise when Brake Pedal Released
T-SB-0363-10 December 22, 2010 Service Category Brake Section Brake Control/Dynamic Control System Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2010 2011 Prius Introduction Some 2010
More informationHuf Group. Your Preferred Partner for Tire Pressure Monitoring Systems. IntelliSens App
IntelliSens App For Android & ios devices Revision 2.0 17.10.2016 Overview Function flow... 3 HC1000... 4 First Steps... 5 How to Read a Sensor... 7 How to Program a Sensor... 10 Program a Single Universal
More information2009 Corolla, Matrix Drive Type(s): 2WD Engine(s): 2ZR VDS(s): BL40E, BU40E, KU40E
T-SB-0175-09 Rev1 June 11, 2009 Service Category Engine/Hybrid System Section Engine Control Market USA Applicability YEAR(S) MODEL(S) ADDITIONAL INFORMATION 2009 Corolla, Drive Type(s): 2WD Engine(s):
More informationPass-Through & J2534 Guide
Pass-Through & J2534 Guide J2534 and Pass-Through J2534 is a set of SAE standards that specify a messaging protocol for standardised vehicle communication interfaces (VCIs). These VCIs such as the Autologic
More informationTHE witech SOFTWARE LEVEL MUST BE AT RELEASE **15.04** OR HIGHER TO PERFORM THIS PROCEDURE.
2014 RAM 3500 HD 6.7L Eng Big Horn FLASH: 6.7L DIAGNOSTIC AND SYSTEM IMPROVEMENTS TECHNICAL SERVICE BULLETIN Reference Number(s): 18-045-15, Date of Issue: May 20, 2015 CHRYSLER: 2014 Ram 2500 Pick Up
More informationMINI V10.90 Diagnostics List(Note:For reference only)
Actuation Special Others Driver DME Digital Motor Electronics 1. Adaptations 2.DME/DDE EWS adjustment 3.CO adjustment 4.Smooth running measurement 5.Tank Leakage System Check 6.Secondary Air System Check
More informationDIAGNOSIS AND TESTING
204-04-1 Wheels and Tires 204-04-1 DIAGNOSIS AND TESTING Tire Pressure Monitoring System Special Tool(s) Vehicle Communication Module (VCM) and Integrated Diagnostic System (IDS) software with appropriate
More informationEncore Release Notes
Encore Release Notes Version 1.3.0.20 Overview: The new version 1.3.0.20 contains a major coverage release. Also provided are selected highlights of new features, fixed defects reported by technician,
More informationCARSOFT BMW MINI Ultimate Home V8.0 SPECIFICATIONS August 22, 2009 Release Specifications
CARSOFT BMW Ultimate Home V8.0 SPECIFICATIONS August 22, 2009 Release Specifications Carsoft International www.carsoftsales.com bmw80@carsoftsales.com Tel: 32/19.54.54.29 Intro: Since 1988, Carsoft has
More informationX500 USER MANUAL 1. RUNNING EVIRONMENT SOFTWARE INSTALLATION SOFTWARE ACTIVATION AND DOWNLOAD SOFTWARE INTRODUCTION...
X500 USER MANUAL 1. RUNNING EVIRONMENT... 2 1.1 HARDWARE EVIRONMENT... 2 1.2 SOFTWARE EVIRONMENT... 2 2. SOFTWARE INSTALLATION... 2 2.1 CLIENT DOWNLOADING... 2 2.2 CLIENT SETUP... 2 3. SOFTWARE ACTIVATION
More informationCannondale Diagnostic Tool Manual
Cannondale Diagnostic Tool Manual For vehicles (ATV & Motorcycles) equipped with the MC1000 Engine Management System Software CD P/N 971-5001983 Data Cable P/N 971-5001984 POTENTIAL HAZARD Running the
More information2006 Porsche Cayenne SUSPENSION Level Control - Diagnostics - 9pa_Cayenne. Level Control - Diagnostics - 9pa_Cayenne
LEVEL CONTROL INTRODUCTION 2003-08 SUSPENSION Level Control - Diagnostics - 9pa_Cayenne NOTE: NOTE: The basic equipment of the Cayenne includes the level control module. The PASM function (Porsche Active
More informationVolvo SCR testing module
Volvo SCR testing module Brief module description We design this module to test the Volvo SCR system (subsequently SCR) and its components. Using this module, you can test different SCR components, such
More informationFixed Right First Time. Volvo Technicians, Service and Parts Managers
Tech-Net Notes Fixed Right First Time Volvo Technicians, Service and Parts Managers NO: 25-19 DATE: 6-30-2004 MODEL: 960-S/V90/850/S70/V70/C70 M. YEAR: 1996-1998 SUBJECT: Establishing Readiness for OBD
More informationSolarity with InfoTech Software Solarity, powered by Genisys technology, is a powerful 4-channel scope with the functionality required to analyze the most sophisticated vehicles. InfoTech Software provides
More informationFUNCTION SELECTION. Check the Trouble Code SCAN-100. Preceding Work: Perform the Entering Diagnosis Procedures
29 FUNCTION SELECTION Check the Trouble Code Preceding Work: Perform the Entering Diagnosis Procedures 1. Select 1] TROUBLE CODE and press ENTER in FUNCTION SELECTION screen. 2. The DIAGNOSTIC TROUBLE
More information2001 Dodge Durango ACCESSORIES & EQUIPMENT' 'Anti-Theft Systems - Dakota & Durango 2001 ACCESSORIES & EQUIPMENT
DESCRIPTION VEHICLE THEFT SECURITY SYSTEM 2001 ACCESSORIES & EQUIPMENT Anti-Theft Systems - Dakota & Durango Vehicle Theft Security System (VTSS) provides perimeter protection against unauthorized use
More information