Latest Versions (July, 2013)

Transcription

1 Latest Versions (July, 013) Software Version Language Release date BMW ENCODING DATABASE /6/5 BMW F-CIP USEN/TWCH 013/6/5 BMW PROGRAMMING /01.1SP1 USEN/TWCH 013/6/5 CHRYSLER /01.1SP1 USEN/TWCH 013/5/30 CITROEN USEN/TWCH/JPJP 013/5/9 DAIHATSU 01.1/011.1SP1 USEN/TWCH/JPJP 013/5/30 FUSO 01.1/011.1SP1 USEN/TWCH 013/5/9 GM /01.1 USEN/TWCH 013/5/30 HOLDEN USEN 013/5/7 HONDA USEN/TWCH/JPJP 013/5/9 IMS BMW V4.03 USEN/TWCH 013/6/5 IMS-BMW-(ICOM) V.04 USEN/TWCH 013/5/30 IMS- V /5/30 FORD/LANDROVER/JAGUAR IMS-VIDA V1.00 USEN/TWCH/JPJP 013/6/5 ISUZU /01.1SP1 USEN/TWCH 013/5/30 J534-VIDA V1.00 USEN/TWCH/JPJP 013/6/5 MB /01.1SP USEN/TWCH/JPJP 013/6/7 OPEL-BR /01.1SP1 USEN 013/5/30 OPEL-TW /01.1SP1 TWCH 013/5/30 OPEL-UK /01.1SP1 USEN 013/5/30 PERODUA 01.1SP1/011.1SP3 USEN 013/5/30 PEUGEOT USEN/TWCH/JPJP 013/5/9 PORSCHE /01.1 USEN/TWCH/JPJP 013/6/5 PROTON /01.1/011.1SP3 USEN/TWCH 013/5/9 RENAULT 01.1SP1/011.1SP USEN/TWCH/JPJP 013/5/30 SUZUKI 01.1SP1/011.1SP3 USEN/TWCH/JPJP 013/6/5 TOYOTA 01.1/011.1SP1 USEN/TWCH/JPJP 013/5/1 VeDiS-II System V.04 USEN/TWCH/JPJP 013/6/0 VM- IMS-BMW 004C3 013/6/5 VM-IMS- 004E5 013/5/30 FORD/LANDROVER/JAGUAR VM-IMS-VIDA 00B1 013/6/5 VOLVO /013.1SP1 USEN/TWCH/JPJP 013/5/30 iscan-ii CHRYSLER V6.01 USEN/TWCH/JPJP 013/5/30

2 iscan-ii CITROEN V6.00/5.03/4.04 USEN/TWCH/JPJP/MXSP 013/5/9 iscan-ii DAIHATSU V5.01/4.0 USEN/TWCH/JPJP 013/5/30 iscan-ii FORD V4.0SP1 USEN/TWCH 013/6/5 iscan-ii HOLDEN V6.01 USEN 013/5/7 iscan-ii IMS BMW V4.03 USEN/TWCH 013/5/30 iscan-ii IMS- V4.06 USEN/TWCH 013/5/30 FORD/LANDROVER/JAGUAR iscan-ii ISUZU V6.01 USEN/TWCH 013/5/30 iscan-ii OPEL-BR V6.01 BREN 013/5/30 iscan-ii OPEL-TW V6.01 TWCH 013/5/30 iscan-ii OPEL-UK V6.01 UKEN 013/5/30 iscan-ii PERODUA V5.0/4.03 USEN 013/5/30 iscan-ii PEUGEOT V6.00/5.03/4.04 USEN/TWCH/JPJP/MXSP 013/5/9 iscan-ii PORSCHE V6.00/5.0 USEN/TWCH/JPJP 013/6/5 iscan-ii PROTON V6.00/5.03/4.05 USEN/TWCH 013/5/9 iscan-ii RENAULT V5.0/4.03 USEN/TWCH/JPJP 013/5/30 iscan-ii SUZUKI V5.0/4.05 USEN/TWCH/JPJP 013/6/5 iscan-ii System V.04 USEN/TWCH/JPJP 013/6/0 iscan-ii TOYOTA V5.08/4.09 USEN/TWCH/JPJP 013/5/1 Yearly Update Project (YUP) Software Software release monthly for: iscan-iiwt /VeDiS-II EURO PRO YUP 013 iscan-iiwt /VeDiS-II ASIAN PRO YUP 013 Please get the updates from website. Technical Guidance Honda ECM/PCM Idle Learn A. You ll need to run this procedure when: (1) Replacing ECM/PCM () Resetting PCM (included clear fault code) (3) Disconnecting or replacing battery (4) Replacing or cleaning the throttle body and Idle motor ***See Notes on the proper way to clean the Throttle body*** (5) When the main power of engine or transmission is disassembled, such as fuse, control relay components and etc. B. Related functions: (1) ECU reset: when replace broken ECU, please execute ECM/PCM ECU reset to clear fault code and correct data. () TP Position Check: this test confirms if the TP learning value is within limits. The learning value depends on carbon accumulation around the throttle body and stored in the ECM/PCM. If it exceeds the limit, reset it and clean the throttle body at the same time. After ECU reset and TP position check, then Engine ECU will be in Idle learn status. (3) Idle learn: The idle learn procedure must be done so the ECM/PCM can learn the engine idle characteristics.

3 (4) Idle learn status: before idle learn, the status shows not complete. During idle learn, the status shows learning and radiator fan running intermittently. The learning process will be interrupted while fan is running and re-learn will resume when fan stops running. Let the engine idle until the idle learn procedure is complete. C. Idle learn procedure: ECU reset TP Position Check Idle learn check data stream How to perform this function utilizing iscan-ii wt: 1. Select Vehicle Diagnostic -> ASIAN 1 Main Menu 1 Vehicle Diagnostic Component Test System (External Modules) 3 IMS(Interface Module Simulation System) 80 OBD- II Standard Compliant Diagnostics 8 DOL Mode (Diagnostic On-Line) Vehicle Diagnostic 1 AMERICAN EUROPEAN 3 ASIAN. Select JAPAN -> HONDA 3 4 ASIAN 1 KOREA JAPAN 3 MALAYSIA 4 AUSTRALIA JAPAN 1 MAZDA DAIHATSU 01.0 USEN 3 HONDA USEN 4 AURA USEN 5 ISUZU USEN 6 MITSUBISHI USEN 3. Select Individual System Search -> Power Train System

4 5 6 HONDA Individual System Search 1 Whole System Search Individual System Search 3 Quick Service 1 Power Train System Chassis System 3 Body System 4 Air Conditioning System 5 Information and Communication System 4. Select 7 8 Power Train System Version Verification 1 A/T 3 IMMOBILIZER KEYS SETTING 4 IMA 5 ACC 6 CMBS 7 I-SHIFT 8 DIESEL 9 SCS SERVICE CAN EE0E Press Enter to continue 1. ECU reset Select Adaptation -> ECU reset 1 1 System Information Read Fault Code 3 Clear Fault Code 4 Data Stream 5 Activation 6 Adaptation 7 Coding/Software Download 8 Waveform Adaptation 1 ECU reset Learning Information The idle may be erratic after the ECU reset. 3 4

5 ECU reset Done = CAUTION = 1.Fault code will be lost..after the ECU is reset, the idle may be erratic. If it happens, executing idle learn. Press ENTER to reset ECU Done reset. If the idle is erratic, let the vehicle idle for ten minutes at normal operating temperature. Press ENTER to continue After ECU reset, please follow step by step and press ENTER to continue. 5 System Check Please turn ignite, remove the key and wait for more than 30 seconds. Then ignite ON, wait about 30 seconds, reconnect to the ECU, check the fault codes of the system. Make sure the fault codes are cleared. The road test is necessary for some situation. Press Enter to continue. TP Position Check Select Activation -> ETCS TEST 1 1 System Information Read Fault Code 3 Clear Fault Code 4 Data Stream 5 Activation 6 Adaptation 7 Coding/Software Download 8 Waveform ACTIVATION 1 VTEC TEST ETCS TEST 3 One injector 4 Fuel Pump off 5 A/C Clutch Please select TP Position Check Information before ETCS TEST.

6 3 ETCS Test 1 ETCS TEST ETCS TEST Information 3 TP Position Check 4 TP Position Check Information 4 TP Position Check Information This test confirms if the TP learning value is within limits. The learning value depends on carbon accumulation around the throttle body and stored in the ECM/PCM. If it exceeds the limit, reset it and clean the throttle body at the same time. Please check throttle body before TP Position Check (reset). If throttle body is dirty, please clean the throttle body at the same time when reset the TP learning value. 5 6 ETCS Test TP Position Check 1 ETCS TEST ETCS TEST Information 3 TP Position Check 4 TP Position Check Information Scanner will reset the TP learning value. Need to clean the throttle body at the same time if reset the TP learning value. Press Enter to continue Press ENTER to reset the TP learning value and do Idle learn once finish reset the TP learning value. 7 8 TP Position Check Do you wish to reset the TP learning value? Press Enter to reset Press Exit to quit TP learning value has been cleared. NOTICE Clean the throttle body. Refer to the Service Manual. If not, some problems may occur. Press Enter to quit 3. Idle learn Select Adaptation -> Learning Information

7 1 1 System Information Read Fault Code 3 Clear Fault Code 4 Data Stream 5 Activation 6 Adaptation 7 Coding/Software Download 8 Waveform ACTIVATION 1 ECU reset Learning Information Please select when to execute idle learn and confirm if need to do Idle learn 3 4 Learning Information Idle Learn Information 1 CRANK PATTERN LEARN IDLE LEARN 1 when to execute idle learn how to execute idle learn 5 6 When to execute Idle Learn Idle Learn Information 1. Replace ECM/PCM. Reset PCM 3. Update PCM 4. Replace or clean the throttle body 5. When the engine or transmission is disassembled 1 when to execute idle learn how to execute idle learn Once finished Idle learn, please check data stream for Idle learn status. 7 8 How to execute Idle Learn How to execute Idle Learn

8 1. Make sure all electrical items (A/C, audio, lights, etc.) are off. Reset the PCM 3. Turn the ignition switch ON(II), and wait for secs 4. Start the engine. Hold the engine speed at 3000 rpm without load (in Park or Neutral) until the radiator fan comes on, or until the engine coolant reaches 194 (90 ) 5. Let the engine idle for about 10 mins with the throttle fully closed 6. Verify on the datalist that the idle learn procedure is complete NOTE: If the radiator fan comes on, do not include its running in the 10 mins. 4. Check Idle learn status Please select data stream and check Idle learn status 1 1 System Information Read Fault Code 3 Clear Fault Code 4 Data Stream 5 Activation 6 Adaptation 7 Coding/Software Download 8 Waveform Data Stream(5/8) DRIVE DIST 0 M PNP SWITCH P/N PSP SWITCH A/T R SWITCH IG1 LEVEL HIGH OIL PRESSURE SWITCH ON ELD 4.19 A MOUNT CTRL SOL Idle learn Not Comp 3 4 Data Stream (5/8) DRIVE DIST 0 M PNP SWITCH P/N PSP SWITCH A/T R SWITCH IG1 LEVEL HIGH OIL PRESSURE SWITCH ON Data Stream(5/8) DRIVE DIST 0 M PNP SWITCH P/N PSP SWITCH A/T R SWITCH IG1 LEVEL HIGH OIL PRESSURE SWITCH ON

9 ELD 4.19 A MOUNT CTRL SOL Idle learn Learing ELD 4.19 A MOUNT CTRL SOL Idle learn Complete **** To properly clean an electronic throttle body you must use the proper cleaner. Have someone depress the accelerator pedal while the key is in the off position and engine is not running. This will open the throttle electronically instead of manually. By opening the throttle body manually you run the risk of damaging it. Once the throttle is open you may clean the inside gently removing any carbon buildup, grease or dirt that may be affecting the throttle body s performance.****