A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 Original Germania ProTime II HerringBone

Size: px

Start display at page:

Download "A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 Original Germania ProTime II HerringBone"

Harvey Haynes
5 years ago
Views:

1 A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 12 Original Germania ProTime II HerringBone Key Features: Rapid Exit - Automatic Indexing - All-Stainless - 45" Cow-to-Cow Distance Parlor will be 53" wide (4" wider than the original Germania) to accommodate 1,800 +lbs cows This parlor should milk from 90 cows per hour with one milker, 120 cows with two Website Parlor # 124-GPT-II Formal Proposal # All-Stainless Dbl. 8 ProTime II with Legacy 9,000 Arm TakeOffs installed at Bruce Siltberg's Dairy near Dresser, WI June 2010 Page 1 of 30

2 Qty Units Description Cost to End-user 24 Stalls HERITAGE Pro Time II RumpRails - 40" - All- Stainless Remanufactured $ 6,857 4 Entrance & Exit Gates 2 1/2 x 2 1/2 x 11ga stainless tubing $ 2, Stalls 5" x 15" Overhead Channel - Stainless $ 1,875 Page 2 of 30

24 Stalls Rapid-Exit Brisket Bars - Remanufactured All-Stainless Brisket Bars Designed for Automatic Indexing $ 9,286 2 Groups Rapid-Exit Lift Group - With: - 5" x 42" lift cylinder - (3) stainless

3 24 Stalls Rapid-Exit Brisket Bars - Remanufactured All-Stainless Brisket Bars Designed for Automatic Indexing $ 9,286 2 Groups Rapid-Exit Lift Group - With: - 5" x 42" lift cylinder - (3) stainless cables - (3) stainless cable retainers and - (4) new pulleys $ 4,286 2 Groups Rapid Exit Control Panel $ 1,429 6 Units Stainless Brisket Bar Posts with Swing Arms $ 7,286 (Cow Platforms to be 53" wide with 10" Indexing System for 1,800+ lbs cows) Page 3 of 30

Cylinders for Auto Indexing - (4) 8-Button Cow Traffic Control Station $ 6,429

4 1 Group Automated Cow Traffic Controls - New! - (4) 3" x 10" stainless Entrance & Exit Gate Cylinders - (6) 3" x 10" stainless Cylinders for Auto Indexing - (4) 8-Button Cow Traffic Control Station $ 6,429 Cow Traffic Controls at last stall on either side of parlor. Stainless cylinders operate Entrance & Exit Gate Page 4 of 30

24 Stalls 0 Stalls All-Stainless Gutter and

All-in-one welded unit Note - Grates will be

$ 10,313 Stainless Gutter, Curbing and Grates

For utmost Cow Comfort we chose 3/4" x 3/4"

Instead, Galvanized Grates with only 1/4" wide

Gutters formed by the local Contractor (and for

5 24 Stalls 0 Stalls All-Stainless Gutter and Curbing - New! All-in-one welded unit Note - Grates will be Original Germania - galvanized! $ 10,313 Stainless Gutter, Curbing and Grates are all one welded unit. For utmost Cow Comfort we chose 3/4" x 3/4" bars, the widest in the industry, bar none. Instead, Galvanized Grates with only 1/4" wide bars are industry standard, as are concrete Gutters formed by the local Contractor (and for which you pay extra) Stainless Curbing only - no Gutter no Grates - New! All-in-one welded structure, part of Module Base $ - Page 5 of 30

Original Germania Heavy Duty All-Air Operated Crowd Gate 1 28 ft x 90 ft - Starts

top and bottom of Holding Pen - 7" instead of 6" diam.

Welds very straight over 6 ft Span/Distance between Vertical Posts - Does not

Germania-Style Crowd Gate; Air-Powered Gear Motor - no electric controls

6 Original Germania Heavy Duty All-Air Operated Crowd Gate 1 28 ft x 90 ft - Starts automatically with 'Brisket Bar Up' - stops after 50 sec - Stops automatically at top and bottom of Holding Pen - 7" instead of 6" diam. wheels $ 14, ft C-4 x 6.5 lbs Crowd Gate Channel - New! Welds very straight over 6 ft Span/Distance between Vertical Posts - Does not require any other re-enforcement or support; cold galvanized $ 3,429 Heavy Duty, Germania-Style Crowd Gate; Air-Powered Gear Motor - no electric controls what-so-ever. Lifts anywhere in Holding Pen and returns overhead cows to rear of pen. Air Motor shuts off automatically, both in front and back. Page 6 of 30

0 ft 0 ft Holding Pen Fence, galvanized with 3" verticals @ 5 ft on center per 20 ft section

7 0 ft 0 ft Holding Pen Fence, galvanized with 3" 5 ft on center per 20 ft section of fence; (4) 1 1/2" Pipe 12" o/c Normally, your Contractor provides the Holding Pen Fences. We'll provide them if he doesn't want to or $74/ft les $ - 2 x 10 ft V-Lane Fences from H.P. into $74/ft less 15% $ - Three Crowd Gate Control Stations: Cost include with Crowd Gate Left: Main Control station in back of parlor; Center: Remote Controls in back of Holding Pen Right: Two extra buttons in front of parlor to Page 7 of 30 reduce walking

8 24 Units Original Germania Legacy 9000 All-Stainless Arm TakeOffs - Remanufactured Remanufactured but with high percentage of new parts All-Air controlled, All-stainless construction with spring-loaded clutch assembly for the Arm $ 47,829 Page 8 of 30

Germania Top Outlet Claw - Remanufactured 24 Units - Air Forks - 06

$ 9,747 Germania's Top Outlet Claw hangs well balanced on the arm

At Germania we developed this claw in 1978, the original Top-Outlet

9 Germania Top Outlet Claw - Remanufactured 24 Units - Air Forks - 06 Shells - 60" Milk Hose - Silicone - 108" Pulsation Hose - Short air tubes - Liners of your choice: Brand & Model - Strangko Pulsators All Rubber Goods are new! $ 9,747 Germania's Top Outlet Claw hangs well balanced on the arm for milking and equally so in the rest position. At Germania we developed this claw in 1978, the original Top-Outlet Claw, and have made it in its original form ever since. New in All-Silicone instead of black Rubber. except inflations Page 9 of 30

10 24 Stalls 3 Units Pulsation System - New! - 3" PVC Pulsation line with hoses, fittings & wiring harness - 3" PVC FreshAir line with fittings & hoses - (4) FreshAir Filters - (2) 3" PVC Cross-Overs in front & back $ 2,229 (Pulsators included with Claw-Clusters) 16-Unit Strangko Pulsation Controllers (one of which will be new) Electrician provides 120 volt receptacle nearby - bid separately! $ 2,357 3rd Controller serves as Standby - pre-wired for instant changeover. No tools required. Page 10 of 30

11 0 Stall Equiv. 0 Unit HERITAGE CIP-Receiver Combination Group - New! This group combines the (2) traditional Receiver Groups and the CIP System into a single pre-assembled aggregate - pre-plumbed, pre-wired and palletized $ - 26" diam. x 24/34" Receiver - which is also the Wash Vat for the CIP Cycle (Nominal Capacity of 80 gl. - Dbl. 12 estimated to use 60 gl/cycle, 180 gl total) - AW-style Moisture Trap with 3" Vac inlet & 3" U-bend, Slide Valve, SST Gauge '- (1) 4" x 33" Sock Milk Filters with 2" side outlet, installed at 45 dgr angle - 1 1/2 hp Milk Pump with Variable Speed Drive - (2) LLC Probes (Float-style) for milk and water levels - 1 1/4" Input Group with hot and cold water valves + (3) chemical inputs Water supply lines to this group needs to be at least 1 1/4" diameter. Otherwise takes too long to fill Receiver 2" Ball Check Valve at pump with air blow-out of Rest Milk '- HERITAGE Model 12.5 Pipe Line Washer - (3) peristaltic chemical pumps deliver detergent, acid and sanitizer automatically - All MAC Interface Valves and Relays Electrician supplies: or 430 volt three phase to this Group Plumber s upplies: - Hot & Cold water to the input group and Water to the Plate Cooler Group includes an extra 1 1/2 hp Milk Pump, prewired with water-tight twist lock plugs for instant change-over, no tools required Group also includes a stand-by Frequency Controller - similarly pre-wired with shielded cable - 4,500 lbs/hr Dual Pass Plate Cooler (2" inlet and outlet, must handle 130 gl of CIP Solution) $ Page 11 of 30

12 HERITAGE CIP-Receiver Combination Groups The new HERITAGE CIP - Receiver Combination Group - installed at the Steve Paul Dairy, Whitewater, WIS, April 2010 This Group replaces the existing (2) Receiver Groups and the CIP System But need to discuss where this group might be located Page 12 of 30

13 1 Group Conventional Receiver Groups - Remanufactured $ 2,143 1 Group Germania CIP System - Remanufactured Including: 140 Gl vertical covered Wash Sink 1.5 hp Pressure Pump Two Air Injectors 1 1/4" Hot and Cold Water Input Group (3) Peristaltic Pumps for chemicals (3) 2" Drains $ 7,143 CIP System will be controlled by a new HERITAGE Pipe Line 1 Washer $ 3,500 Page 13 of 30

14 0 Units Fold-Up CIP Cup Holders Do not need Rubber Cups (To be discussed ) $ - 24 Units Traditional CIP Cup Holders $ Units Air-Powered CIP Cup Holders Just push a button - Now you see them - then you don't; all 32 at once $ - Page 14 of 30

15 3" Lo-Line 24 Stalls Single Loop, double slope line, connecting to the existing 3" lines $ 2,914 2" CIP Lines 24 Stalls From the Wash Sink to the back of the Parlor $ 857 2" Discharge line 80 ft from CIP-Receiver Group to Milk Tank. Includes special adapters at Tank and Safety Switches. $ 2,857 PipeLine patches to close inlet holes both of the 3" LoLine and 0 Units the 2" CIP Line (15 out of 48) $ - 0 Units 3/4" Pipeline Inlets for both 3" and 2" Lines $ - Page 15 of 30

16 Compressed Air System - New! 1 Group - (1) 7.5 hp Atlas-Copco Screw Compressor with Twin-Tower Drier, dries air to minus 10 dgr $ 13,125 Electrician provides 230 Volt 3-phase to this group 10 hp Atlas Copco Srew Compressor & 80 gl storage tank for dry air 1 Group Small Air Prep Group - APP-S - New! Page 16 of 30 Includes 1/2" copper lines & fittings to all stations of parlor $ 1,279

0 Units 60 ft 15 Hp Vacuum System with Lobe-Style Pump Need to

!! Gardner-Denver/Sutor-Built Pump $ - - Includes Frequency

with Cow ID: shielded cable, none metallic enclosure, filtered

17 0 Units 60 ft 15 Hp Vacuum System with Lobe-Style Pump Need to discuss!!! Gardner-Denver/Sutor-Built Pump $ - - Includes Frequency Controllers/Variable Speed Drive designed for 'No Interference' with Cow ID: shielded cable, none metallic enclosure, filtered input, etc., i.e. AfiMilk compatible 6" PVC Header Lines with 3" fittings to Pulsation and 4" adaptors to the CIP / Receiver Group $ 1,714 Electrician provides 430 volt 3 phase to this Group 6" Header Line supplies CIP Receiver Group and Pulsation System Page 17 of 30

1 Group On-Farm Spare Parts Kit (Contains only new parts) Includes all essential parts for at least (1) year of operation (2) sensors, a retract cylinder, at least (1) of each air valves, etc.

18 1 Group On-Farm Spare Parts Kit (Contains only new parts) Includes all essential parts for at least (1) year of operation (2) sensors, a retract cylinder, at least (1) of each air valves, etc. $ 6,429 2 x 5-ft Stainless Curb Extensions in Front 11 ft from Exit Gate to Breezeway Wall. Prevents manure from running into the pit; Includes concrete guard. $ Pcs Double Compartment Sink - New! $ 643 Accessories Group - New! 1 Group Hand Wash Sink, Filter Sock Holder with (1) box of Filters, SST paper towel holder, Soap Dispenser, Hose Rack for garden hose in Milk House, etc. $ 679 Pit Mats for 8 ft wide x 60 ft long pit floor (Mat-Tec Mats) 0 squ ft Page 18 of 30 Color of your choice - Blue, Green, Red or White $ -

120 ft with solid Brass Firehose Nozzles $ 1,371 30 ft

19 1 Unit Stainless Pit Steps - 4 steps, 30" wide - New! $ 857 (2) 60 ft 1 1/4" Wash-Down Hose for Cow Platforms 120 ft with solid Brass Firehose Nozzles $ 1, ft (1) x 30 ft 1" Clean-up hoses for the pit $ 214 Page 19 of 30

5" square stainless tubing - 10- ft + 3 ft long,

20 2 Unit Stainless Breezeway Fence - New! with (2) 3ft 'Side Wings' - Made from 2.5" x 2.5" square stainless tubing ft + 3 ft long, with - (2) Horizontals and - (4) 3 ft Verticals $ 2,939 Page 20 of 30

12 -Stall Stainless Modular Platforms - New!

be 34" - if you are comfortable with a 38" working height. To be discussed!

tubing and usually 53" wide x 50.6 ft long for the typical dbl. 12.

21 12 -Stall Stainless Modular Platforms - New! 2 Units The structural bases of the Modules; Height of your concrete cow platform should be 34" - if you are comfortable with a 38" working height. To be discussed! $ 3,974 We build our parlor modules on platforms, a frame work made form 2" x 4" steel tubing and usually 53" wide x 50.6 ft long for the typical dbl. 12. Normally, we slide the Modules into place on this steel frame work, pushed by a Skid Loader. Parlors up to dbl. 12 come on two trucks, all larger ones need four. Page 21 of 30

22 2 Trucks Summary Page Sub-Total Materials $ 183,771 Less: 15% Dairy-Direct Discount $ (27,566) Parlor Materials after Discount $ 156,206 Pre-Installation Labor and Supplies provided by TechForAg at it's factory to convert the above materials into a Ready-To-Milk Modular Parlor (calculated at 10% of materials) $ 18,377 Freight $650/Truck to anywhere in the State of Wisconsin $ 1,300 On-Site Installation Labor, Supplies & Expenses (Two Installers for 10 days plus one Installers for two days follow-up and Start-up of milking) $ 14,520 Grand Total Parlor with Freight & Installation $ 190,403 Per Stall $ 7,933 Page 22 of 30

23 11 Optionally Available 10ft Sections Overhead Channel instead of 6" x 4" Support Structure - New! $ 11,393 Page 23 of 30

24 Afi 'Essential' Milk Meter System - New! 24 Units Afimilk New Style Milk Meters with: Afi Essential Key Boards Butterfat Samplers Water-tight Connection Boxes $ 42,343 0 Units Afi Individual Stall Antennas $ - 0 Unit Switch Box for Antennas (Collects wires from up to 16 antennas and forwards signals to Ideal Controller) $ - 0 Unit Ideal Controller (Supports 48 antennas or three Switch Boxes) $ - 0 Unit Communications Card (To be insstalled in a dedicated Computer; Communicates with up to 64 Meters; Computer not included) $ - 3 Units Transformers $ 1,041 1 Unit Afi Dairy Software $ 2, Groups MAC Valve, Inlet Ellbow, Vacuum ShutOff Valve, 7/8" Pipe Line Inlet $ 4,065 1 Set Wires, Hoses, Conduit and fittings $ 1,786 Sub Total Materials $ 52,192 Page 24 of 30

25 Pre-assembly / Pre-installation in the Factory $ 6,263 Freight N/C GrandTotal I $ 58,456 On-Site Installation, two Technician, two days $ 1,100 Afi Specialist Training & Travel Expenses $ 1,500 Grand Total II $ 61,056 Per Stall $ 1,908 ID Tags, incl. Straps and Wedges $ 89 Page 25 of 30

26 Afi 'Essential' Computerized Dairy Management System - New! 24 Units Afimilk New Style Milk Meters with: Afi Essential Key Boards Butterfat Samplers Water-tight Connection Boxes $ 42, Units Afi Individual Stall Antennas $ 15,943 2 Unit Switch Box for Antennas (Collects wires from up to 16 antennas and forwards signals to Ideal Controller) $ 3,746 1 Unit Ideal Controller (Supports 48 antennas or three Switch Boxes) $ 3,146 1 Unit Communications Card (To be insstalled in a dedicated Computer; Communicates with up to 64 Meters; Computer not included) $ 2,377 3 Units Transformers $ 1,041 1 Unit Afi Dairy Software $ 2, Groups MAC Valve, Inlet Ellbow, Vacuum ShutOff Valve, 7/8" Pipe Line Inlet $ 4,065 1 Set Wires, Hoses, Conduit and fittings $ 1,786 Sub Total Materials $ 77,404 Page 26 of 30

27 Pre-assembly / Pre-installation in the Factory $ 11,611 Freight N/C GrandTotal I $ 89,014 On-Site Installation, two Technician, four days $ 4,400 Afi Specialist Training & Travel Expenses $ 2,500 Grand Total II $ 95,914 Per Stall $ 2,997 ID Tags, incl. Straps and Wedges $ 89 Page 27 of 30

28 24 Stalls 1" Kraiburn Rubber Mats (Made in Germany) - New! For the (2) Modular Cow Platforms $ 3,780 Plus Freight and Installation Page 28 of 30

29 24 Stalls Germania Back Flush System, incl.. - Stainless Turn -Valves - (2) 14 gl.vacuum Sweep Tanks with (2) two-way Valves each - (2) Power Manifolds with (2) two-way Valves each - (2) Control Boxes, one per side - (1) All-Stainless Iodine Injection Group with B-13 LiquiMatic Pump $ 26,229 - (4) Milk-Sweep Relays - 1 1/2" stainless BF lines below curb Plumber supplies - Cold water to the Iodine Injection Group. - The PVC lines from the Iodine Injection Group to the (6) 2-way valves of the (2) Power Manifolds Bid separately! Includes Freight and Installation Page 29 of 30

30 Terms - I If production at TFA starts several months in the future 1) 15% down at signing of contract 2) 35% on start of production 3) 45% on delivery of parlor to the dairy 4) 5% on Start-up of Milking 4) $1,000 Rebate for prompt payment Terms - II If production at TFA starts more or less immdiately 1) 35% at signing of contract, plus 2) 25% six weeks later 2) 35% on delievery of parlor to the dairy 3) 5% on start-up of milking 4) $1,000 Rebate for prompt payment Page 30 of 30

(Picture of Parlor Stalls not available at this time) This parlor should milk from 160 cows to 220 cows per hour with two milkers

(Picture of Parlor Stalls not available at this time) This parlor should milk from 160 cows to 220 cows per hour with two milkers A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 22 DeLaval/lue Diamond Parallel Key Features: Rapid Exit - Automatic Indexing - 28" Cow-to-Cow Distance This parlor should milk from 160 cows to 220