(Picture of Parlor Stalls not available at this time) This parlor should milk from 160 cows to 220 cows per hour with two milkers

Size: px

Start display at page:

Download "(Picture of Parlor Stalls not available at this time) This parlor should milk from 160 cows to 220 cows per hour with two milkers"

Martha Higgins
5 years ago
Views:

1 A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 22 DeLaval/lue Diamond Parallel Key Features: Rapid Exit - Automatic Indexing - 28" Cow-to-Cow Distance This parlor should milk from 160 cows to 220 cows per hour with two milkers Prepared For: Website Parlor # 125Preliminary Proposal # (Picture of Parlor Stalls not available at this time) Qty Units Description Cost to End-user 44 Stalls Blue Diamond dbl. 22 Butt-Plate Assemblies - 28" Remanufactured $ 18,857 2 Entrance Gates $ Stalls 5" x 15" Overhead Channel - Stainless $ - 44 Stalls Rapid-Exit GEGI Front Ends - Remanufactured Designed for Automatic Indexing $ 13,829 8 Groups Rapid-Exit Lift Group $ 5,143 8 Groups Cow Traffic Control Points $ 4, Stalls Stainless Curbing - New! $ 6,286 Page 1 of 28

2 Heavy Duty All-Air Operated Crowd Gate - New! Cold Galvanized - Starts automatically with 'Rapid Exit Open' - stops after 30 sec - Stops automatically at top and bottom of Holding Pen - 7" instead of 6" diam. wheels - Without Manure Scraper $ 21, ft C-4 x 6.5 lbs Crowd Gate Channel - New! Welds very straight over 6 ft Span/Distance between Vertical Posts - Does not require any other re-enforcement or support; cold galvanized $ 3,429 Heavy Duty, Germania-Style Crowd Gate; Air-Powered Gear Motor - no electric controls what-so-ever. Lifts anywhere in Holding Pen and returns overhead cows to rear of pen. Air Motor shuts off automatically, both in front and back. Page 2 of 28

0 ft 0 ft Holding Pen Fence, galvanized with 3" verticals @ 5 ft on center per 20 ft section

3 0 ft 0 ft Holding Pen Fence, galvanized with 3" 5 ft on center per 20 ft section of fence; (4) 1 1/2" Pipe 12" o/c Normally, your Contractor provides the Holding Pen Fences. We'll provide them if he doesn't want to or $74/ft les $ - 2 x 10 ft V-Lane Fences from H.P. into $74/ft less 15% $ - Three Crowd Gate Control Stations: Cost include with Crowd Gate Left: Main Control station in back of parlor; Center: Remote Controls in back of Holding Pen Right: Two extra buttons in front of parlor to Page 3 of 28 reduce walking

4 44 Units Original Germania Stainless Model C TakeOffs - Remanufactured Remanufactured but with high percentage of new parts All-Air controlled, All-stainless construction $ 43,686 Page 4 of 28

5 44 Units Germania Top Outlet Claw - Remanufactured - Air Forks - 06 Shells - 60" Milk Hose - Silicone - 108" Pulsation Hose - Short air tubes - Liners of your choice: Brand & Model - Delatron Pulsators All Rubber Goods are New! $ 21,641 New in All-Silicone Rubber. except inflations Page 5 of 28

6 44 Stalls 4 Units Pulsation System - New! - 4" PVC Pulsation line with hoses, fittings & wiring harness - 4" PVC FreshAir line with fittings & hoses - (6) FreshAir Filters - (2) 3" PVC Cross-Overs in front & back $ 4,086 (Pulsators included with Claw-Clusters) 80-Unit Delatron Pulsation Controllers (one of which will be new) Electrician provides 120 volt receptacle nearby - bid separately! $ 3,143 4th Controller serves as Standby - pre-wired for instant changeover. No tools required. Page 6 of 28

7 0 Stall Equiv. 0 Unit HERITAGE CIP-Receiver Combination Group - New! This group combines the (2) traditional Receiver Groups and the CIP System into a single pre-assembled aggregate - pre-plumbed, pre-wired and palletized $ - 26" diam. x 24/34" Receiver - which is also the Wash Vat for the CIP Cycle (Nominal Capacity of 80 gl. - Dbl. 12 estimated to use 60 gl/cycle, 180 gl total) - AW-style Moisture Trap with 3" Vac inlet & 3" U-bend, Slide Valve, SST Gauge '- (1) 4" x 33" Sock Milk Filters with 2" side outlet, installed at 45 dgr angle - 1 1/2 hp Milk Pump with Variable Speed Drive - (2) LLC Probes (Float-style) for milk and water levels - 1 1/4" Input Group with hot and cold water valves + (3) chemical inputs Water supply lines to this group needs to be at least 1 1/4" diameter. Otherwise takes too long to fill Receiver 2" Ball Check Valve at pump with air blow-out of Rest Milk '- HERITAGE Model 12.5 Pipe Line Washer - (3) peristaltic chemical pumps deliver detergent, acid and sanitizer automatically - All MAC Interface Valves and Relays Electrician supplies: or 430 volt three phase to this Group Plumber s upplies: - Hot & Cold water to the input group and Water to the Plate Cooler Group includes an extra 1 1/2 hp Milk Pump, prewired with water-tight twist lock plugs for instant change-over, no tools required Group also includes a stand-by Frequency Controller - similarly pre-wired with shielded cable - 4,500 lbs/hr Dual Pass Plate Cooler (2" inlet and outlet, must handle 130 gl of CIP Solution) $ Page 7 of 28

8 HERITAGE CIP-Receiver Combination Groups The new HERITAGE CIP - Receiver Combination Group - installed at the Steve Paul Dairy, Whitewater, WIS, April 2010 This Group replaces the existing (2) Receiver Groups and the CIP System But need to discuss where this group might be located Page 8 of 28

9 2 Group Conventional Receiver Groups - Remanufactured (1) 4" x 33" Sock Filter each 4" Vacuum Supply and Moisture Trap $ 9,143 1 Group Germania CIP System - Remanufactured Including: 140 Gl vertical covered Wash Sink 2 hp Pressure Pump- New! Two Air Injectors - New! 1 1/4" Hot and Cold Water Input Group - New! (3) Peristaltic Pumps for chemicals - New! (3) 2" Drains $ 8,571 CIP System will be controlled by a New 1 HERITAGE Pipe Line Washer $ 5,000 Page 9 of 28

10 0 Units Traditional CIP Cup Holders $ - 44 Units Fold-Up CIP Cup Holders Do not need Rubber Cups (To be discussed ) $ 12,257 0 Units Air-Powered CIP Cup Holders Just push a button - Now you see them - then you don't; all 32 at once $ - Page 10 of 28

11 3" Lo-Line 44 Stalls Double Loop, double slope line $ 5,343 2" CIP Lines 44 Stalls From the Wash Sink to the back of the Parlor $ 1, /2" - 2" Discharge line 90 ft from Receiver Group to Milk Tank. Includes 2" Y where (2) 1 1/2" lines join; also includes special adapters at Tank and Safety Switches. $ 3,214 PipeLine patches to close inlet holes both of the 3" LoLine and 0 Units the 2" CIP Line (15 out of 48) $ - 0 Units 3/4" Pipeline Inlets for both 3" and 2" Lines $ - Page 11 of 28

12 Compressed Air System - New! 1 Group - (1) 10 hp Atlas-Copco Screw Compressor with Twin-Tower Drier, dries air to minus 10 dgr $ 15,250 Electrician provides 230 Volt 3-phase to this group 10 hp Atlas Copco Srew Compressor & 80 gl storage tank for dry air 1 Group Small Air Prep Group - APP-S - New! Page 12 of 28 Includes 1/2" copper lines & fittings to all stations of parlor $ 1,994

1 Unit 20 Hp Sutor-Built Lobes-Style Blower Pump $ 17,143 - Includes

1 Unit 20 Hp DeLaval 86 Vacuum System - Remanufactured!

4" adaptors to the CIP / Receiver Group $ 2,571 Electrician provides

13 1 Unit 20 Hp Sutor-Built Lobes-Style Blower Pump $ 17,143 - Includes Frequency Controller/Variable Speed Drive - New! 1 Unit 20 Hp DeLaval 86 Vacuum System - Remanufactured! $ 5, ft 6" PVC Header Lines with 3" fittings to Pulsation and 4" adaptors to the CIP / Receiver Group $ 2,571 Electrician provides 430 volt 3 phase to this Group 6" Header Line supplies CIP Receiver Group and Pulsation System Page 13 of 28

1 Group On-Farm Spare Parts Kit (Contains only new parts) Includes all essential parts for at least (1) year of operation (2) sensors, a retract cylinder, at least (1) of each air valves, etc.

14 1 Group On-Farm Spare Parts Kit (Contains only new parts) Includes all essential parts for at least (1) year of operation (2) sensors, a retract cylinder, at least (1) of each air valves, etc. $ 6,429 4 x 2.5-ft Stainless Curb Extensions in Front 10 ft from Exit Gate to Breezeway Wall. Prevents manure from running into the pit; Includes concrete guard. $ Pcs Double Compartment Sink - New! $ 786 Accessories Group - New! 1 Group Hand Wash Sink, Filter Sock Holder with (1) box of Filters, SST paper towel holder, Soap Dispenser, Hose Rack for garden hose in Milk House, etc. $ 821 Pit Mats for 8 ft wide x 60 ft long pit floor (Mat-Tec Mats) 0 squ ft Page 14 of 28 Color of your choice - Blue, Green, Red or White $ -

180 ft with solid Brass Firehose Nozzles $ 2,057 90 ft

15 1 Unit Stainless Pit Steps - 4 steps, 30" wide - New! $ 857 (2) 90 ft 1 1/4" Wash-Down Hose for Cow Platforms 180 ft with solid Brass Firehose Nozzles $ 2, ft (2) x 45 ft 1" Clean-up hoses for the pit $ 643 Page 15 of 28

5" square stainless tubing - 10- ft + 3 ft long,

16 2 Unit Stainless Breezeway Fence - New! with (2) 3ft 'Side Wings' - Made from 2.5" x 2.5" square stainless tubing ft + 3 ft long, with - (2) Horizontals and - (4) 3 ft Verticals $ 2,939 Page 16 of 28

22 -Stall All-Stainless Modular Platforms - New!

be 34" - if you are comfortable with a 38" working height. To be discussed!

tubing and usually 53" wide x 50.6 ft long for the typical dbl. 12.

17 22 -Stall All-Stainless Modular Platforms - New! 2 Units The structural bases of the Modules; Height of your concrete cow platform should be 34" - if you are comfortable with a 38" working height. To be discussed! $ 8,286 We build our parlor modules on platforms, a frame work made form 2" x 4" steel tubing and usually 53" wide x 50.6 ft long for the typical dbl. 12. Normally, we slide the Modules into place on this steel frame work, pushed by a Skid Loader. Parlors up to dbl. 12 come on two trucks, all larger ones need four. Page 17 of 28

18 Summary Page Sub-Total Materials $ 256,986 Less: 15% Dairy-Direct Discount $ (38,548) Parlor Materials after Discount $ 218,438 Pre-Installation Labor and Supplies provided by TechForAg at it's factory to convert the above materials into a Ready-To-Milk Modular Parlor (calculated at 10% of materials) $ 25,699 0 Trucks Freight $550/Truck $ - On-Site Installation Labor, Supplies & Expenses (Two Installers for 10 days plus one Installers for five days follow-up and Start-up of milking) $ 16,500 Grand Total Parlor with Freight & Installation $ 260,637 Per Stall $ 5,924 Page 18 of 28

19 Optionally Available Afi 'Essential' Milk Meter System - New! 44 Units Afimilk New Style Milk Meters with: Afi Essential Key Boards Butterfat Samplers Water-tight Connection Boxes $ 77,629 0 Units Afi Individual Stall Antennas $ - 0 Unit Switch Box for Antennas (Collects wires from up to 16 antennas and forwards signals to Ideal Controller) $ - 0 Unit Ideal Controller (Supports 48 antennas or three Switch Boxes) $ - 0 Unit Communications Card (To be insstalled in a dedicated Computer; Communicates with up to 64 Meters; Computer not included) $ - 6 Units Transformers $ 2,083 1 Unit Afi Dairy Software $ 2, Groups MAC Valve, Inlet Ellbow, Vacuum ShutOff Valve, 7/8" Pipe Line Inlet $ 7, Stalls Wires, Hoses, Conduit and fittings $ 4,714 Page 19 of 28 Sub Total Materials $ 94,836

20 Pre-assembly / Pre-installation in the Factory $ 11,380 Freight N/C GrandTotal I $ 106,216 On-Site Installation, two Technician, two days $ 1,100 Afi Specialist Training & Travel Expenses $ 1,500 Grand Total II $ 108,816 Per Stall $ 2,473 ID Tags, incl. Straps and Wedges $ 89 Page 20 of 28

21 Afi 'Essential' Computerized Dairy Management System - New! 44 Units Afimilk New Style Milk Meters with: Afi Essential Key Boards Butterfat Samplers Water-tight Connection Boxes $ 77, Units Afi Individual Stall Antennas $ 29,229 3 Unit Switch Box for Antennas (Collects wires from up to 16 antennas and forwards signals to Ideal Controller) $ 5,619 1 Unit Ideal Controller (Supports 48 antennas or three Switch Boxes) $ 3,146 1 Unit Communications Card (To be insstalled in a dedicated Computer; Communicates with up to 64 Meters; Computer not included) $ 2,377 6 Units Transformers $ 2,083 1 Unit Afi Dairy Software $ 2, Groups MAC Valve, Inlet Ellbow, Vacuum ShutOff Valve, 7/8" Pipe Line Inlet $ 7, Stalls Wires, Hoses, Conduit and fittings $ 4,714 Sub Total Materials $ 135,206 Page 21 of 28

22 Pre-assembly / Pre-installation in the Factory $ 20,281 Freight N/C GrandTotal I $ 155,487 On-Site Installation, two Technician, four days $ 4,400 Afi Specialist Training & Travel Expenses $ 2,500 Grand Total II $ 162,387 Per Stall $ 3,691 ID Tags, incl. Straps and Wedges $ 89 Page 22 of 28

23 44 Stalls 1" Kraiburn Rubber Mats (Made in Germany) - New! For the (2) Modular Cow Platforms $ 6,930 Plus Freight and Installation Page 23 of 28

24 44 Stalls Germania Back Flush System, incl.. - Stainless Turn -Valves - (2) 14 gl.vacuum Sweep Tanks with (2) two-way Valves each - (2) Power Manifolds with (2) two-way Valves each - (2) Control Boxes, one per side - (1) All-Stainless Iodine Injection Group with B-13 LiquiMatic Pump $ 48,086 - (4) Milk-Sweep Relays - 1 1/2" stainless BF lines below curb Plumber supplies - Cold water to the Iodine Injection Group. - The PVC lines from the Iodine Injection Group to the (6) 2-way valves of the (2) Power Manifolds Bid separately! Includes Freight and Installation Page 24 of 28

25 Terms - I If production at TFA starts several months in the future 1) 15% down at signing of contract 2) 35% on start of production 3) 45% on delivery of parlor to the dairy 4) 5% on Start-up of Milking 4) $1,000 Rebate for prompt payment Terms - II If production at TFA starts more or less immdiately 1) 35% at signing of contract, plus 2) 25% six weeks later 2) 35% on delievery of parlor to the dairy 3) 5% on start-up of milking 4) $1,000 Rebate for prompt payment Page 25 of 28

A TechForAg 'Ready-To-Milk' Modular Parlor. Model: Dbl. 12 Original Germania ProTime II HerringBone

A TechForAg 'Ready-To-Milk' Modular Parlor Model: Dbl. 12 Original Germania ProTime II HerringBone Key Features: Rapid Exit - Automatic Indexing - All-Stainless - 45" Cow-to-Cow Distance Parlor will be