Linear Full Electric 916LE / 925LE / 932LE / 942LE / 932XE / 942XE / 955LE / 963LE / 980LE. Tube benders

Transcription

1 Linear Full Electric 916LE / 925LE / 932LE / 942LE / 932XE / 942XE / 955LE / 963LE / 980LE Tube benders

2 Linear Full Electric 916LE / 925LE / 932LE / 942LE / 932XE / 942XE The 916LE, 925LE, 932LE, 942LE, 932XE and 942XE series of CNC tube benders offer multiple, fully automatic bending cycles with high accuracy and productivity using a small bending head that allows for the creation of tight part shapes in a single cycle, even for tubes that normally require two-way bending. The bending head allows the simultaneous use of multiple types of tooling, including different radii, compound clamps, and variable radius dies. The head can be manually arranged for either clockwise or counterclockwise bending, and the machines are pre-configured to be easily integrated into working cells. All nine axes are driven by electric motors with digital Elect Motion technology and controlled by the Siemens 840 Dsl CNC. This provides high quality energy conservation and low to zero setup scrap. An intuitive interface on the color LCD screen, three-dimensional graphics software, and User ISO Interface (UII) allows simulation and optimization of the bending cycle. Their high production speed, ability to integrate special devices, and capability to create bends with a radius of less than 0.8D, or push with variable radius bends (optional), make these machines ideal for applications found in the automotive, aerospace, air conditioning, and furniture industries. Technical details 916LE 925LE 932LE 942LE 932XE 942XE Max. tube diameter [mm] 16 x 2 25 x 3 32 x 2 42 x 2 32 x 2 42 x 2 Max. bending radius [mm] Max. length of tube [mm] 1500 / / 2900 / 3400 / / / 2050 Max. bending speed [ /sec] Bending Resolution [ ] ± 0.05 ± 0.05 ± 0.05 ± 0.05 ± 0.05 ± 0.05 Max. speed of Y axis [m/min] Res. of Y axis [mm] ± 0.05 ± 0.05 ± 0.05 ± 0.05 ± 0.05 ± 0.05 Power [kw] Weight [kg] Overall dimensions [mm]

3

4 Linear Full Electric 955LE The 955LE CNC tube bender offers high levels of accuracy and productivity. It can perform multiple, fully automatic bending cycles using a small bending head that allows for the creation of tight part shapes in a single cycle, even for tubes that normally require two-way bending. The bending head allows the simultaneous use of multiple types of tooling, including different radii, compound clamps, and variable radius dies. The head can be manually indexed for either clockwise or counterclockwise bending. An optional Tangent Boost device is available to axially push tubes during the bending process in the pressure die slide/wiper die zone to minimize waste by reducing required cut lengths. Crippa 955LE machines are pre-configured to be easily integrated into working cells. All nine axes are driven by electric motors with digital Full Electric technology and controlled by the Siemens 840 Dsl CNC; there are no hydraulics. This provides high quality energy conservation and low to zero setup scrap. An intuitive interface on the 19 color LCD screen, three-dimensional graphics software, and User ISO Interface (UII) allows simulation and optimization of the bending cycle. Its high production speed, ability to integrate special devices, and capability to create bends with a radius of less than 0.8D, or push with variable radius bends (optional), make this machine ideal for applications found in the automotive, aerospace, urban design and shipbuilding industries. Technical details 955LE Max. tube diameter [mm] 55 x 2.5 Max. bending radius [mm] 250 Max. length of tube [mm] / 2400 Max. bending speed [ /sec] 150 Bending Resolution [ ] ± 0.05 Max. speed of Y axis [m/min] 75 Res. of Y axis [mm] ± 0.05 Power [kw] 20 Weight [kg] 4000 Overall dimensions [mm] 1625 / 1800 / 4500

5

6 Linear Full Electric 963LE / 980LE The 963LE and 980LE series of CNC tube benders offer high levels of accuracy and productivity. They can perform multiple, fully automatic bending cycles using a small bending head that allows for the creation of tight part shapes in a single cycle, even for tubes that normally require two-way bending. The bending head allows the simultaneous use of multiple types of tooling, including different radii, compound clamps, and variable radius dies. The head can be manually configured for either clockwise or counterclockwise bending. An optional Tangent Boost device is available to axially push tubes during the bending process in the pressure die slide/wiper die zone to minimize scrap by reducing required cut lengths. Crippa 963LE and 980LE machines are pre-configured to be easily integrated into working cells. All nine axes are driven by electric motors with digital Full Electric technology and controlled by the Siemens 840 Dsl CNC; there are no hydraulics. This provides high quality energy conservation and low to zero setup scrap. An intuitive interface on the 19 color LCD screen, three-dimensional graphics software, and User ISO Interface (UII) allows simulation and optimization of the bending cycle. Their high production speed, ability to integrate special devices, and capability to create bends with a radius of less than 0.8D, or push with variable radius bends (optional), make these machines ideal for applications found in the automotive, aerospace, urban design and shipbuilding industries. Technical details 963LE 980LE Max. tube diameter [mm] 63 x 3 80 x 2 Max. bending radius [mm] Max. length of tube [mm] 2500 / / 4150 Max. bending speed [ /sec] Bending Resolution [ ] ± 0.05 ± 0.05 Max. speed of Y axis [m/min] 56,7 56,7 Res. of Y axis [mm] ± 0.05 ± 0.05 Power [kw] Weight [kg] Overall dimensions [mm] 1650 / 1810 / / 1810 / 5580

7

8 CRIPPA S.p.A. HEADQUARTERS Via M. Buonarroti, Arosio (CO) Italy ph. (+39) info@crippa.it web CRIPPA USA LLC 65 N River Lane, Suite 209 Geneva, Il ph info@crippa.us web Machine data is provided for informational purposes only and should not be considered definitive. Crippa SpA reserves the right to make any alterations to improve the machines from a technical and/or economical standpoint. Full or partial reproduction of this document or any of its content is strictly prohibited.