Telescopic pillar. For infant care CPMB. Benefits. Standards

Transcription

1 Telescopic pillar For infant care CPB Universal power supply Plug and play Soft start and stop control Low noise level Cable through pillar Grounding continuity IEC :2005 (3rd edition)

2 For infant care CPB Telescopic pillars Suitable operating devices drawing External power supply 2 V DC EHA1-13N10N-000 STL01-GW1000-X190 STK01-SW3000-X100 STK01-UW3000-X100 ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ,5 ±1 19,5 ±1 Hand switch Foot switch Desk switch box ains cable Detacheable mains cord Stroke ±2 Connecting diagrams 2 V DC V AC L - PE Operating device N PE Operating device Retracted length ±2 Stroke ±1 125 ±1 Technical data Unit Rated push load (with self locking) N Rated pull load N Bending moment (dynamic) Nm up to 115 1) up to 250 1) up to 250 1) Speed (full load to no load) mm/s 1 to to to 15 Telescopic pillar version # of section 2-section 2-section 2-section Stroke mm 230 to to to 00 Retracted length mm S+160 S+160 S+160 Static Load (ax) in push way N Static bending moment (ax) Nm Voltage (rated) V AC 50/60 Hz AC 50/60 Hz 2 DC Input current (rated) A 1,5 1,6 5 Duty cycle: intermittent operation on/off 1 min./9 min. 1 min./9 min. 1 min./9 min. Ambient temperature C +10 to to to +0 Type of protection IP Protection class I I Type of control electrical electrical electrical Noise level (ax) db(a) Weight kg 8 to 11 9 to 12 8 to 11 Stand by power (ax) W 1 to 2.1 2) 1 to 2.1 2) 1) For details, see offset load diagrams 2) The lowest value when powered with the lowest voltage 2

3 Telescopic pillars For infant care CPB Offset load diagram Load [N] Offset load diagram and Load [N] Speed-load diagram Speed [mm/s] Ideal range Overload range Ideal range Overload range Underload range Underload range Load distance from the center of the pillar [mm] Offset load at full extension in the best axis Load distance from the center of the pillar [mm] Offset load at full extension in the best axis Load [N] ore flexibility with Series CPB design options Built-in with outer tube on top ore hygienic and easy-to-clean design Built-in with outer tube on bottom ore aesthetic design otor orientation B otor orientation A otor orientation A otor orientation B Connections and fastening RJ 5 LAN location 121 ( 6) 133 ( 6) ains power connection (Terminal block) ains power connection (Terminal block) RJ 5 LAN location RJ5 Operating device location! IPORTANT 6-8 Nm 6-11 mm Pillar must be attached on plane and rigid surface by screws 6 with a depth of 6 to 11 mm in the pillar. The total length of the screw must be adjusted to the height of the fixture. Screw 6 property class 8.8 3

4 For infant care CPB Inlet socket box Telescopic pillars Hand Foot Desk ains cables Detacheable mains cords Technical data IEC inlet mains power socket with retainer 1 RJ5 for operating device 1 RJ5 for LAN 2 replacable fuses 8 A Plate with holes as the plates of the pillar CPB Can be fastened on inner and outer tube 205, Outlet socket box Hand Foot Desk Detacheable mains cords EHA1-13N10N-000 STL01-GW1000-X190 STK01-SW3000-X100 STK01-UW3000-X100 EHA1-13N10N-000 STL01-GW1000-X190 STK01-SW3000-X100 STK01-UW3000-X100 ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ultifunction plug and play accessory Detachable mains power cord Replaceable fuses LAN Connector Easy to use Cord strain relief Designation Order N ains cables ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ultifunction plug and play accessory 3 IEC outlet sockets Replaceable fuses Integrated mounting plate LAN Connector Easy to use Technical data 3 IEC mains power outlet sockets 1 RJ5 for operating device 1 RJ5 for LAN 2 replacable fuses 8 A Integrated mounting plate with holes 9 mm diameter screws to fasten on pillar CPB Can be fastened on inner and outer tube Designation Order N

5 Telescopic pillars ounting plate For infant care CPB ains cable and detacheable mains cord ZPL Easy to use Technical data Can be fastened on inner and outer tube ounting plate with holes 9 mm diameter Designation Order N ZPL ains cable Detacheable mains cord ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA ZKA Easy to use Identification by a product label ains cable and detachable mains cord Ordering key Description Designation Order N ains cable straight 2,5 m, Schuko : Germany, France,. ZKA ains cable straight 2,5 m, Typ-L : Italy ZKA ains cable straight 2,5 m, British standard : UK ZKA ains cable straight 2,5 m, NEA : USA, Japan, ZKA ains cable straight 2,5 m, SEV : Switzerland ZKA ains cable straight 2,5 m, AS 3112 : PRC, Australia ZKA Detachable mains cord straight 2,5 m, Schuko : Germany, France,. ZKA Detachable mains cord straight 2,5 m, Typ-L : Italy ZKA Detachable mains cord straight 2,5 m, British standard : UK ZKA Detachable mains cord straight 2,5 m, NEA : USA, Japan, ZKA Detachable mains cord straight 2,5 m, SEV : Switzerland ZKA Detachable mains cord straight 2,5 m, AS 3112 : PRC, Australia ZKA

6 For infant care CPB Desk switch STK Telescopic pillars Easy and precise Stylish design Tactile buttons with finger guide 2 colors LED for power and feedback status STK01-SW3000-X100 STK01-UW3000-X100 66,7 12,3 20, ,8 6 8 Designation L mm 10,5,2 38 STK01-SW3000-X STK01-UW3000-X See page 7 for technical data and ordering key 17 L 7 Hand switch EHA Robust ergonomic design Tactile buttons Easy mountable fastening hook 2 colors LED for power and feedback status EHA1-13N10N Ø See page 7 for technical data and ordering key 6

7 Telescopic pillars Foot switch STL For infant care CPB Easy and precise Ergonomic design STL01-GW1000-X Position Ø 7, Position Switches Technical data Unit EHA STL STK ax. operating channels n Operating power V DC/mA 5/20 5/20 5/20 Type of protection IP 67 x2 Color Grey Grey and anthracite Grey Indicator LED 2 colors for power and feedback status LED 2 colors for power and feedback status Plug RJ5 RJ5 RJ5 Hook with hook Symbols with arrows up/down with arrows up/down with arrows up/down Switches Ordering key Description Designation Order N Desk switch with LED, cable 0,5 m STK01-SW3000-X Desk switch with LED, cable 1,0 m STK01-UW3000-X Hand switch with LED and arrows, coiled cable 1,3 m EHA1-13N10N Foot switch, coiled cable 1,3 m STL01-GW1000-X

8 Seals echatronics Bearings and units Services Lubrication systems The Power of Knowledge Engineering Combining products, people, and applicationspecific knowledge, SKF delivers innovative solutions to equipment manufacturers and production facilities in every major industry worldwide. Having expert ise in multiple competence areas supports SKF Life Cycle anagement, a proven approach to improv ing equipment reliability, optimizing operational and energy efficiency and reducing total cost of ownership. These competence areas include bearings and units, seals, lubrication systems, mecha tronics, and a wide range of services, from 3-D computer modelling to cloud-based condition monitoring and asset management services. SKF s global footprint provides SKF customers with uniform quality standards and worldwide product availability. Our local presence provides direct access to the experience, knowledge and ingenuity of SKF people. SKF BeyondZero is more than our climate strategy for a sustainable environment: it is our mantra; a way of thinking, innovating and acting. For us, SKF BeyondZero means that we will reduce the negative environmental impact from our own operations and at the same time, increase the positive environmental contri bution by offering our customers the SKF BeyondZero portfolio of products and services with enhanced envir onmental performance characteristics. For inclusion in the SKF BeyondZero portfolio, a product, service or solution must deliver significant environmental benefits without serious envir onmental trade-offs. The CPB telescopic pillars are included in the SKF BeyondZero portfolio because they cut power consumption by 72%, compared to standard SKF and competitor s pillars over a ten-year service life, reducing standby power losses. Telescopic pillar Ordering key For accessories, see pages, 5, 6 and 7 Type C P B Voltage V AC 50/60 Hz 1 2 V DC 2 Load: Push (N) Only for AC version Tube set 2-section 2 Stroke length (mm) 200 Only for DC version Other per 10 mm from 200 mm or 230 mm for AC version up to 00 mm otor orientation* otor in inner tube otor in outer tube A B Operating device orientation Operating device socket as the motor Operating device socket at both sides A B *Pillar can be placed with outer tube on the top or bottom (please refer to page 3) SKF is a registered trademark of the SKF Group. SKF Group 201 The contents of this publication are the copyright of the publisher and may not be reproduced (even extracts) unless prior written permission is granted. Every care has been taken to ensure the accuracy of the information contained in this publication but no liability can be accepted for any loss or damage whether direct, indirect or consequential arising out of the use of the information contained herein. PUB T/P EN December 201 This publication supersedes publication PUB T/P EN. skf.com