1. Housings - Server, Patch and Co-location racks (VARICON) Housings - LANRack (VARICON) Housings - Wall enclosures (VARICON) 87

Transcription

1

2

3 Contents 1. Housings - Server, Patch and Co-location racks (VARICON) 3 2. Housings - LANRack (VARICON) Housings - Wall enclosures (VARICON) Cooling (VARICONDITION) Monitoring (VARICONTROL) Power distribution (VARICONPOWER) 119

4

5 CATALOGUE 2014 Housings - Server, Patch and Co-location racks (VARICON) Pre-assembled Components Cable management Airflow optimisation components Accessories Housings - Server, Patch and Co-location racks (VARICON)

6 1 Pre-assembled Server racks 600 mm wide A distinction is made between stand-alone racks and baying racks. Removable side panels are supplied with the stand-alone racks. Instead of side panels, linking sets are supplied with the baying racks. 4 Specifications Available in RAL colours 9011 (black) and 7047 (grey). Fitted with 80%-perforated front and rear doors. The doors are right-hung and fitted with a two-point Fix-easy swivel handle with an EK-333 cylinder lock. There are three recesses in the top of the rack which are fitted with two protective plates and a cable bushing brush set. The rack is fitted with four universal 19-inch profiles. These profiles are fitted 80 mm from the front of the rack and at 740 mm intervals as standard. The racks are supplied with 20 cage nuts and 20 decorative screws. The racks are fully grounded. The load-bearing capacity of the racks with a width of 600 mm is 1500 kg. Application Compact server rack with a high load-bearing capacity on a small surface area. Depth: 1000 mm Width: 600 mm Unit Height U mm Colour Door front and rear side Description Part. no RAL % perforated Stand-alone incl. side panels VME206010S RAL % perforated Baying type incl. baying kit VME206010C RAL % perforated Stand-alone incl. side panels VME206010SB RAL % perforated Baying type incl. baying kit VME206010CB RAL % perforated Stand-alone incl. side panels VME226010S RAL % perforated Baying type incl. baying kit VME226010C RAL % perforated Stand-alone incl. side panels VME226010SB RAL % perforated Baying type incl. baying kit VME226010CB RAL % perforated Stand-alone incl. side panels VME246010S RAL % perforated Baying type incl. baying kit VME246010C RAL % perforated Stand-alone incl. side panels VME246010SB RAL % perforated Baying type incl. baying kit VME246010CB

7 Housings - Server, Patch and Co-location racks (VARICON) Patch and server racks 800 mm wide A distinction is made between stand-alone racks and baying racks. Removable side panels are supplied with the stand-alone racks. Instead of side panels, linking sets are supplied with the baying racks. Specifications Available in RAL colours 9011 (black) and 7047 (grey). Racks which are 1000 mm deep or more are fitted with 80%-perforated front and rear doors. Racks which are 800 mm deep are fitted with a clear glass front door and a false rear door. The doors are right-hung and fitted with a two-point Fix-easy swivel handle with an EK-333 cylinder lock. There are three or four recesses in the top of the rack which are fitted with two or three protective plates and a cable bushing brush set. The racks are fitted with four universal 19-inch profiles. These profiles are fitted 80 mm from the front of the rack and at 740 mm intervals as standard. In the case of the 800 mm-deep racks, the profiles nearest to the back are mounted at 87.5 mm. The racks are supplied with 20 cage nuts and 20 decorative screws. The racks are fully grounded. The load-bearing capacity of the 800 mm wide racks is 1000 kg (racks with 800 mm depth) or 1500 kg (racks with 1000 and 1200 mm depth). Accessory packs are available for these patch and server racks. 5 Application The 800 mm wide racks are very well suited for use with patching, network and server equipment. Width: 800 mm Unit Height Depth Door front and U mm mm Colour rear side Description Part. no RAL 7047 Clear glass - metal Stand-alone, side panels VME138080S RAL 9011 Clear glass - metal Stand-alone, side panels VME138080SB RAL % perforated Stand-alone, side panels VME138010S RAL % perforated Stand-alone, side panels VME138010SB RAL 7047 Clear glass - metal Stand-alone, side panels VME208080S RAL 7047 Clear glass - metal Baying type, baying kit VME208080C RAL 9011 Clear glass - metal Stand-alone, side panels VME208080SB RAL 9011 Clear glass - metal Baying type, baying kit VME208080CB RAL % perforated Stand-alone, side panels VME208010S RAL % perforated Baying type, baying kit VME208010C RAL % perforated Stand-alone, side panels VME208010SB RAL % perforated Baying type, baying kit VME208010CB RAL % perforated Stand-alone, side panels VME208012S RAL % perforated Baying type, baying kit VME208012C Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

8 1 Unit Height Depth Door front and 6 U mm mm Colour rear side Description Part. no RAL % perforated Stand-alone, side panels VME208012SB RAL % perforated Baying type, baying kit VME208012CB RAL 7047 Clear glass - metal Stand-alone, side panels VME228080S RAL 7047 Clear glass - metal Baying type, baying kit VME228080C RAL 9011 Clear glass - metal Stand-alone, side panels VME228080SB RAL 9011 Clear glass - metal Baying type, baying kit VME228080CB RAL % perforated Stand-alone, side panels VME228010S RAL % perforated Baying type, baying kit VME228010C RAL % perforated Stand-alone, side panels VME228010SB RAL % perforated Baying type, baying kit VME228010CB RAL % perforated Stand-alone, side panels VME228012S RAL % perforated Baying type, baying kit VME228012C RAL % perforated Stand-alone, side panels VME228012SB RAL % perforated Baying type, baying kit VME228012CB RAL % perforated Stand-alone, side panels VME248010S RAL % perforated Baying type, baying kit VME248010C RAL % perforated Stand-alone, side panels VME248010SB RAL % perforated Baying type, baying kit VME248010CB RAL % perforated Stand-alone, side panels VME248012S RAL % perforated Baying type, baying kit VME248012C RAL % perforated Stand-alone, side panels VME248012SB RAL % perforated Baying type, baying kit VME248012CB

9 Housings - Server, Patch and Co-location racks (VARICON) Express accessory packs The accessory packs have been put together specifically for guiding network cables in 800 mm wide patch and server racks. Packs have been put together based on the amount of cabling and its type (copper/ glass). A distinction is made between the "Basic" and "Plus" packs. The "Plus" packs also provide for the feeding of active network equipment. The packs are not mounted on the racks at the factory. "Copper Basic" accessory packs The following products are included in this pack: 4 (25U) or 6 (41/46U) shunting couplings (85 mm wide x 165 mm deep), 1 x 200 mm cable tray, 20 pieces of Velcro and 100 M5 cage nuts with decorative screws. "Copper Plus" accessory packs The following products are included in this pack: 8 (25U) or 12 (41/46U) shunting couplings (85 mm wide x 165 mm deep), 2 x 300 mm cable trays, 40 pieces of Velcro, 100 M5 cage nuts with decorative screws, 1 cable bushing brush set for in the top of the cabinet and 1 horizontal 19- inch power strip. It depends on the country what the connections are. In the UK there are 7 BS 1363 outlets and the input connector is BS, in BE- FR there are 9 UTE outlets and the input connector is UTE and in NL-BE there are 9 Schuko outlets and the input connector is SCHUKO/ UTE. 7 "Fiber Basic" accessory packs The following products are included in this pack: 2 cable guide profiles (whole height of the rack) with 10 cable guides, 1 x 200 mm cable tray, 20 pieces of Velcro and 100 M5 cage nuts with decorative screws. "Fiber Plus" accessory packs The following products are included in this pack: 2 cable guide profiles (whole height of the rack) with 10 cable guides, 2 x 300 mm cable trays, 40 pieces of Velcro, 100 M5 cage nuts with decorative screws, 1 cable bushing brush set for in the top of the cabinet and 1 horizontal 19-inch power strip. It depends on the country what the connections are. In the UK there are 7 BS 1363 outlets and the input connector is BS, in BE-FR there are 9 UTE outlets and the input connector is UTE and in NL-BE there are 9 Schuko outlets and the input connector is SCHUKO/ UTE. Unit Height Description U mm Part. no. "Copper Basic" accessory package VMA0104 "Copper Basic" accessory package VMA0106 "Copper Basic" accessory package VMA0107 "Copper Plus" accessory package (PDU NL - BE) VMA0114 "Copper Plus" accessory package (PDU BE - FR) VMA0124 "Copper Plus" accessory package (PDU UK) VMA0134 "Copper Plus" accessory package (PDU NL - BE) VMA0116 "Copper Plus" accessory package (PDU BE - FR) VMA0126 "Copper Plus" accessory package (PDU UK) VMA0136 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

10 1 8 Unit Height Description U mm Part. no. "Copper Plus" accessory package (PDU NL - BE) VMA0117 "Copper Plus" accessory package (PDU BE - FR) VMA0127 "Copper Plus" accessory package (PDU UK) VMA0137 "Fiber Basic" accessory package VMA0204 "Fiber Basic" accessory package VMA0206 "Fiber Basic" accessory package VMA0207 "Fiber Plus" accessory package (PDU NL - BE) VMA0214 "Fiber Plus" accessory package (PDU BE - FR) VMA0224 "Fiber Plus" accessory package (PDU UK) VMA0234 "Fiber Plus" accessory package (PDU NL - BE) VMA0216 "Fiber Plus" accessory package (PDU BE - FR) VMA0226 "Fiber Plus" accessory package (PDU UK) VMA0236 "Fiber Plus" accessory package (PDU NL - BE) VMA0217 "Fiber Plus" accessory package (PDU BE - FR) VMA0227 "Fiber Plus" accessory package (PDU UK) VMA0237 What s in the box: Products including mounting materials

11 Housings - Server, Patch and Co-location racks (VARICON) Co-Location cabinets Minkels compartmented co-location cabinets are an ideal means of housing several end-clients in the same cabinet, while ensuring they are safely segregated. You have the choice of 2 or 4-compartment cabinets. Minkels co-location cabinets also comprise two compartments (2x 2U) for the datacenter owner, in which monitoring solutions and power strips, etc., can be installed. Each compartment in the 4-compartment cabinet is 10 U, while in the 2- compartment cabinet each is 20 U. The compartments are completely segregated by means of a fixed platform, while each has its own shielded data & power cable duct. In the event that the datacenter owner no longer requires segregated compartments, then the colocation cabinet can be converted into a cabinet without compartments. The co-location cabinet can also be converted from a 2-compartment to a 4-compartment cabinet and vice versa. Furthermore, the 80% perforated doors ensure that your equipment receives an ample supply of cooling air. The cabinets have a loadbearing capacity of 1500 kg. There are three or four slots in the top of the co-location cabinet, in which you can fit various insert modules. Side panels are not supplied as standard, as the co-location cabinets are very often linked together. Side panels can naturally be ordered separately for a stand-alone cabinet or one to be placed at the end of a row. The co-location cabinet is supplied as standard without a swivel handle grip. Various locking systems are available and can be ordered separately. 9 Unit Height Width Depth U mm mm mm Colour Description Part. no RAL sections (2x20U) MCL RAL sections (4x10U) MCL RAL sections (2x20U) MCL RAL sections (4x10U) MCL RAL sections (2x20U) MCL RAL sections (4x10U) MCL RAL sections (2x20U) MCL RAL sections (4x10U) MCL RAL sections (2x20U) MCL RAL sections (4x10U) MCL RAL sections (2x20U) MCL RAL sections (4x10U) MCL RAL sections (2x20U) MCL RAL sections (4x10U) MCL RAL sections (2x20U) MCL RAL sections (4x10U) MCL Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

12 1 Integration rack Minkels Integration Racks are ideal for prefabrication of the ITequipment. The system allows IT-equipment to be built-in, cabled and tested before it s being shipped to the customer location. Using the Minkels integration rack reduces on-site installation time significantly. Features: Colour: RAL 9011 (black) High Dynamic load: 1000 kg High Static Load: 1500 kg Heavy Duty casters for transportation Heavy Duty 19"-interior, adjustable and including number strips. 10 Support open en closed loop cooling Open loop configurations: Front and back door are equipped with 80% perforated doors and swivel handles Closed loop configuration: Front and back door are equipped with glass doors and swivel handles Cable Management Cable Trays (2 x 200 mm wide) for vertical cable management. Compatible with standard cable ducts (page 40) Airflow Management Side Skirt with 3 x Ø60 mm cutouts (both sides) Other Side panels are supplied as an accessory Racks are fully grounded Integration with other Minkels products: VariCondition - Row Based Cooling (Page 103) Next Generation Cold Corridor (Page 102) VariconPower PDU s (page 120) Application 800 mm integration rack for prefabrication of IT-equipment Width: 800 mm Depth Height Unit 19" - dist. front mm mm U Airflow (mm) 19" - pitch (mm) Part. no Open loop 62,5 740 MIR CB Open loop MIR CB Open loop 62,5 740 MIR CB Open loop MIR CB Open loop 62,5 740 MIR CB Open loop MIR CB

13 Housings - Server, Patch and Co-location racks (VARICON) Depth Height Unit 19" - dist. front mm mm U Airflow (mm) 19" - pitch (mm) Part. no Closed loop MIR CB Open loop 62,5 740 MIR CB Open loop MIR CB Closed loop MIR CB Integration rack accessories The Minkels Integration racks can be equipped with a variety of accessories. Cable Management: Cable tie strips for compact cable bundling, especially in combination with closed loop cooling. Cable management panels for vertical cable management in open loop configurations. The panels are equipped with 6 shunting eyes. 11 Other: The Minkels integration racks are compatible with the standard Varicon- M side panels. Minkels integration racks can be bayed using the standard Varicon-M baying kits. Description Side panel mm x 41U/73ME (d x h) RAL 9011 Side panel mm x 41U/73ME (d x h) RAL 9011 Side panel mm x 46U/81ME (d x h) RAL 9011 Side panel mm x 46U/81ME (d x h) RAL 9011 Cable Tie Strip - 41U - RAL 9011 Cable Tie Strip - 46U - RAL 9011 Cable management panel incl. 6x shunting eye - 41U - RAL 9011 Cable management panel incl. 6x shunting eye - 46U - RAL 9011 Baying kit external Baying kit internal Set for internal and external baying Part. no. MSP0306B MSP0406B MSP0307B MSP0407B MIR0101 MIR0110 MIR0201 MIR0210 MFM0052 MFM0053 MFM0054 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

14 12 1

15 Housings - Server, Patch and Co-location racks (VARICON) Components Frames The variable construction (frame-plus concept) guaranties a high stability and strength. The fully earthed frame makes it possible to build a cabinet for both the active as passive network solutions. The frame as standard comes with a base height of 25 mm. The option of a 100 mm base will raise the cabinet by a further 75 mm higher than stated in the table. Frame material: Aluminium Finishing frame: Powder coated 13 Width mm Width mm Frame height Depth U mm mm Colour Part. no. Part. no RAL 7047 VMF RAL 7047 VMF RAL 7047 VMF RAL 7047 VMF RAL 7047 VMF RAL 7047 VMF RAL 7047 VMF VMF RAL 7047 VMF VMF RAL VMF138080B RAL 7047 VMF VMF RAL 7047 VMF VMF RAL VMF B RAL 7047 VMF VMF RAL 7047 VMF VMF RAL 7047 VMF VMF RAL 7047 VMF VMF RAL VMF208080B RAL 7047 VMF VMF RAL 7047 VMF VMF RAL 9011 VMF B VMF B Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

16 1 Width mm Width mm Frame height Depth U mm mm Colour Part. no. Part. no RAL 7047 VMF VMF RAL 9011 VMF B VMF B RAL 7047 VMF VMF RAL 7047 VMF VMF RAL VMF228080B RAL 7047 VMF VMF RAL 7047 VMF VMF RAL 9011 VMF B VMF B RAL 7047 VMF VMF RAL 9011 VMF B VMF B RAL 7047 VMF VMF RAL 9011 VMF B VMF B RAL 7047 VMF VMF RAL 9011 VMF B VMF B What s in the box: 1 frame Adjustable base legs Adjustable base legs are supplied for levelling the cabinet. The maximum for 4 pieces is 1000 kg and for 6 pieces 1500 kg. Material: Plastic Height mm Maximum weight (kg) Pieces Part. no kg 4 MSM kg (additional) 2 (additional) MSM1002 What s in the box: Adjustable base legs incl. mounting material

17 Housings - Server, Patch and Co-location racks (VARICON) Extended base legs If more space for ventilation or cable entry is required, base legs can be selected. Base legs are supplied with adjustable feet and can be used with plinths. Quantity is 4. The cabinet will be 75 mm higher than the standard frame. Finishing: Galvanised Colour: Material: Thickness: Sendzimir Sheet metal 2.0 mm Height Maximum weight mm kg Part. no MSM2001 What s in the box: 4 base legs, mounted, incl. mounting material Castors 15 If the cabinet is equipped with castors it is very easy to move the cabinet from one location to the other. A set of castors is available with or without brakes. The maximum weight illustrated is per set. Construction height: 100 mm Maximum weight: Housing material: Wheel material: 400 kg Steel Plastic Type Part. no. 4 castors without brakes MSM castors with brakes, 2 castors without brakes MSM3002 What s in the box: 4 castors incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

18 1 Plinths 25 mm front/rear Plinths are available in a perforated or blank version. Ventilated front/ rear plinth with a height of 25 mm create an optimal airflow in the cabinet. Plinths are secured to the base by means of a click -system and cover the adjustable feet. Width mm type Colour Part. no. 600 Blank RAL 7047 MSM Blank RAL 9011 MSM1101B 600 Perforated RAL 7047 MSM Perforated RAL 9011 MSM1102B 800 Blank RAL 7047 MSM Blank RAL 9011 MSM1201B 800 Perforated RAL 7047 MSM Perforated RAL 9011 MSM1202B What s in the box: 1 plinth Plinths 25 mm side Blank plinths to cover the base legs and to support the side panel. They are secured to the base with screws. Depth mm Colour Part. no. 600 RAL 7047 MSM RAL 7047 MSM RAL 9011 MSM1203B 900 RAL 7047 MSM RAL 7047 MSM RAL 9011 MSM1403B 1200 RAL 7047 MSM RAL 9011 MSM1503B What s in the box: 1 plinth incl. fasteners

19 Housings - Server, Patch and Co-location racks (VARICON) Plinths 100 mm front/rear Plinths are available in a perforated and blank version. The ventilated plinth is used to create an optimal airflow in the cabinet. To prevent dust, an optional filter set can be used. The filter set also fits the 100 mm side plinths. Plinths are secured to the base legs with screws. Width mm type Colour Part. no. 600 Blank RAL 7047 MSM Blank RAL 9011 MSM2101B 600 Perforated RAL 7047 MSM Perforated RAL 9011 MSM2102B 600 Filter set MSM Blank RAL 7047 MSM Blank RAL 9011 MSM2201B 800 Perforated RAL 7047 MSM Perforated RAL 9011 MSM2202B Filter set MSM2302 What s in the box: 1 plinth incl. fasteners Side plinths 100 mm Plinths to cover the base legs and to support the side panel. They are secured to the base with screws. Depth mm type Colour Part. no. 600 Blank RAL 7047 MSM Blank RAL 7047 MSM Blank RAL 9011 MSM2203B 900 Blank RAL 7047 MSM Blank RAL 7047 MSM Blank RAL 9011 MSM2503B 1200 Blank RAL 7047 MSM Blank RAL 9011 MSM2603B What s in the box: 1 plinth incl. fasteners Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

20 1 Plinths front/rear (in combination with castors) Plinths can be used in combination with castors and are secured to the base by means of a so-called click-system. type: Blank Width mm Part. no. 600 MSM MSM3201 What s in the box: 1 plinth Side plinths (in combination with castors) 18 Plinths can be used in combination with castors and are secured to the base by using screws. Depth mm Part. no. 600 MSM MSM MSM MSM3403 What s in the box: 1 plinth incl. mounting material Floor fixing set The floor fixing set will secure the frame to several floor types. If a computer floor is being used, we recommend a direct attachment to a lower floor, this is possible by using a length of stud. The stud is not included in this set. Sockle height mm Part. no. 25 MSM MSM4101 What s in the box: 2 Z-profiles with integrated nuts, incl. mounting material

21 Housings - Server, Patch and Co-location racks (VARICON) Base plates Base plates are available in blank versions or with three cut outs. The cut outs are modular and will accept cable entry brush, ventilation plate, blank plate or ventilation unit. With the 800 mm width cabinets it is possible to use a blank plate or cable entry brush at the right and left of the bottom plate. Thickness: 1.5 mm Cut-out depth: Cut-out width: 122 mm 405 mm Depth Bottom plate width mm Cut-out # cut-outs Colour Part. no. 600/ Cut-outs 3 RAL 7047 MBM / Blank 0 RAL 7047 MBM / Cut-outs 3 RAL 7047 MBM / Cut-outs 3 RAL 9011 MBM0101B 600/ Blank 0 RAL 7047 MBM / Cut-outs 3 RAL 7047 MBM / Blank 0 RAL 7047 MBM / Cut-outs 3 RAL 7047 MBM / Cut-outs 3 RAL 9011 MBM0103B 600/ Blank 0 RAL 7047 MBM / Cut-outs 3 RAL 7047 MBM / Cut-outs 3 RAL 9011 MBM0104B 600/ Blank 0 RAL 7047 MBM0114 What s in the box: 1 bottom plate incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

22 1 Base plates left / right, (800 mm width) In the 800 mm version there is a base plate and room for options as shown in the table below. Location: Left/right Depth type Location mm Colour Part. no. Blank Left/right 600 RAL 7047 MBM0120 Blank Left/right 800 RAL 7047 MBM0121 Blank Left/right 800 RAL 9011 MBM0121B 20 Blank Left/right 900 RAL 7047 MBM0122 Blank Left/right 1000 RAL 7047 MBM0123 Blank Left/right 1000 RAL 9011 MBM0123B Blank Left/right 1200 RAL 7047 MBM0124 Blank Left/right 1200 RAL 9011 MBM0124B Brush Left/right 600 Black MBM0130 Brush Left/right 800 Black MBM0131 Brush Left/right 900 Black MBM0132 Brush Left/right 1000 Black MBM0133 Brush Left/right 1200 Black MBM0134 Stiffener profile Left/right 1200 RAL 7047 MBM0044 What s in the box: The blank, brush and cable pull relief are delivered as single pieces. The stiffener profiles are delivered per 2 incl. mounting material

23 Housings - Server, Patch and Co-location racks (VARICON) Top blank The top features 3 or 4 cut-outs which can be fitted with various inserts for cable-entry and/or ventilation. Cut outs are spread from front to rear in the 600 mm wide tops, or from left to right in 800 mm wide tops. This type has no ventilation slots. A top with ventilation slots are available on request. Material: Steel Finishing: Description: Powder coated blank Width Depth Cut out Cut out layout mm mm pcs Colour Part. no Front - rear RAL 7047 MRF Front - rear RAL 7047 MRF Front - rear RAL 7047 MRF Front - rear RAL 7047 MRF Front - rear RAL 9011 MRF0027B Left - right RAL 7047 MRF Left - right RAL 9011 MRF0031B Front - rear RAL 7047 MRF Front - rear RAL 9011 MRF0030B Left - right RAL 7047 MRF Left - right RAL 9011 MRF0032B Left - right RAL 7047 MRF Left - right RAL 7047 MRF Left - right RAL 9011 MRF0120B Left - right RAL 7047 MRF Left - right RAL 7047 MRF Left - right RAL 9011 MRF0028B Left - right RAL 7047 MRF Left - right RAL 9011 MRF0029B What s in the box: 1 top incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

24 1 Insert modules Depending on the situation, you can choose optional modules for base or top cut-outs. Description Technical data Part. no. Fan unit with IEC connection, incl cabling RAL 7047 Fan unit with IEC connection, incl cabling RAL 9011 Flow under normal load conditions 340 m³/h Flow under normal load conditions 340 m³/h MCS1004 MCS1004B 22 Cover plate RAL x 427 mm MBM1001 Cover plate RAL x 427 mm MBM1001B Ventilation plate 58% perforated RAL 7047 Perorated surface 300 cm² MBM1008 Ventilation plate 58% perforated RAL 9011 Perorated surface 300 cm² MBM1008B Set of cable entry brushes max opening 153 x 427 mm MBM1003 Fan unit incl. 2 fans and wiring RAL VAC m³/h - 48dB - 44Watt MBM1004 Fan unit incl. 2 fans and wiring RAL VAC m³/h - 48dB - 44Watt MBM1004B What s in the box: single pieces incl. mounting material (if needed) Thermostat The thermostat measures the heat in the cabinet continuously and switches the fan unit MBM1004(B) on and off to maintain the desired temperature. Material Colour Technical data Part. no. Plastic White 0-60 C, max. 6A/250 VAC MCC0300 What s in the box: 1 thermostat, cable included, 1 mounting bracket, self-adhesive

25 Housings - Server, Patch and Co-location racks (VARICON) Thermostate The thermostat can be used together with the following fans: Triple fan unit MCS1004(B) Double fan unit TRI.VE MWE roof panel with built-in double fan unit MWEFP425, MWEFP525 and MWEFP625 The thermostat ensures that the fan is turned on at the temperature setting you select. Material Colour Technical data Part. no. Plastic Grey 0-60 C, max 6A/250 VAC MWETF02 Plastic Grey 0-60 C, max 6A/250 VAC MWETF01 What s in the box: 1 thermostat, cable included 23 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

26 1 Solid doors Solid steel door, hinged right. A lock for the swivel handle is ordered separately. Hinges are included. Material: Sheet metal Finishing: Powder coated Width mm Width mm 24 Unit U Colour Part. no. Part. no. 12 RAL 7047 MFD RAL 7047 MFD RAL 7047 MFD RAL 7047 MFD0004 MFD RAL 7047 MFD0005 MFD RAL 7047 MFD0006 MFD RAL 9011 MFD0006B MFD0106B 46 RAL 7047 MFD0007 MFD RAL 9011 MFD0007B MFD0107B What s in the box: 1 door, hinges included (up to and including 25 HE are 2 hinges necessary, over 25 HE are 3 hinges necessary) incl. mounting material

27 Housings - Server, Patch and Co-location racks (VARICON) Doors 80% ventilated The sheet metal door has a perforation surface of 80%. This perforation rate guarantees an optimal air flow. The 600 mm wide door has a perforation width of ± 450 mm. The 800 mm wide door has a perforation width of ± 585 mm. Doors are hinged right as standard. A lock for the swivel handle is ordered separately. Hinges are included. Material: Sheet metal Finishing: Powder coated Width mm Width mm Unit U Colour Part. no. Part. no RAL 7047 MFD7004 MFD RAL 9011 MFD7104B 41 RAL 7047 MFD7006 MFD RAL 9011 MFD7006B MFD7106B 46 RAL 7047 MFD7007 MFD RAL 9011 MFD7007B MFD7107B 50 RAL 7047 MFD7008 MFD RAL 9011 MFD7008B MFD7108B What s in the box: 1 door, hinges included (up to and including 25 HE are 2 hinges necessary, over 25 HE are 3 hinges necessary) incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

28 1 Glazed doors (clear) Steel frame with clear safety glass panel. Doors are hinged right as standard. A lock for the swivel handle is ordered separately. Hinges are included. Material: Sheet metal Finishing: Powder coated Width mm Width mm 26 Unit U Colour Part. no. Part. no. 12 RAL 7047 MFD RAL 7047 MFD RAL 7047 MFD RAL 7047 MFD1004 MFD RAL 7047 MFD1005 MFD RAL 7047 MFD1006 MFD RAL 9011 MFD1006B MFD1106B 46 RAL 7047 MFD1007 MFD RAL 9011 MFD1007B MFD1107B What s in the box: 1 door, hinges included (up to and including 25 HE are 2 hinges necessary, over 25 HE are 3 hinges necessary) incl. mounting material

29 Housings - Server, Patch and Co-location racks (VARICON) Double doors blank Two-leaf steel plate door, blank type. The double door provides easy access to the cabinet, with a minimum turning circle. In that way the room in the cabinet is maximised. A lock for the swivel handle is ordered separately. Hinges are included. Material: Sheet metal Finishing: Powder coated Colour: RAL 7047 Width mm Unit 800 U Colour Part. no RAL 7047 MDD RAL 7047 MDD0107 What s in the box: 1 door, consists of a left and right turning part, 6 hinges, incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

30 1 Double doors 80% ventilated Two-leaf steel plate door, 80% ventilated to create airflow to or from your equipment. The double door provides easy access to the cabinet, with a minimum turning circle. A lock for the swivel handle is ordered separately. Hinges are included. Material: Sheet metal Finishing: Powder coated Width mm Width mm 28 Unit U Colour Part. no. Part. no. 41 RAL 7047 MDD7006 MDD RAL 9011 MDD7006B MDD7106B 46 RAL 7047 MDD7007 MDD RAL 9011 MDD7007B MDD7107B 50 RAL 7047 MDD7008 MDD RAL 9011 MDD7008B MDD7108B What s in the box: 1 door, consists of a left and right turning part, 6 hinges, incl. mounting material

31 Housings - Server, Patch and Co-location racks (VARICON) Double doors glass (grey tinted) Two-leaf steel glass door, the glass is grey tinted. The double glass door provides easy access to the cabinet, with a minimum opening radius, it enlarges the amount of space and enables optimal use of your computer room or patch room. A lock for the swivel handle is ordered separately. Hinges are included. Material: Sheet metal Finishing: Powder coated Colour: RAL 7047 Width mm Unit 800 U Colour Part. no RAL 7047 MDD RAL 7047 MDD1117 What s in the box: 1 door, consists of a left and right turning part, 6 hinges, incl. mounting material Rear panels Square 6 locks enable the panels to be removed quickly. The rear panel is manufactured blank to assist venting through the top panel. Material: Sheet metal Finishing: Powder coated Colour: RAL 7047 Width mm Width mm Unit U Part. no. Part. no. 12 MRP MRP MRP MRP0004 MRP MRP0005 MRP MRP0006 MRP MRP0007 MRP0107 What s in the box: 1 panel, 2 locks square 6 mm (12-25HE), 4 locks square 6mm (37-46HE) Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

32 1 Optional seals The optional rubber door seals can be used at the left or right side. It provides an optimal climate in your cabinet, reduces sound and reduces the amount of dust in the cabinet. Material: Rubber Colour: Black Unit U Part. no. 12 MFR MFR MFR MFR MFR MFR MFR0007 What s in the box: 1 rubber sealing, self-adhesive Extension kit With this extension kit you can increase your cabinet depth by multiples of 100 mm. This kit is easy to mount and the cabinet becomes 100 mm wider. The kit can be mounted to the front or rear. Existing doors can be fitted to the extension kit itself. In this manner your Varicon-M cabinet is future proof. 19-inch profiles can be placed in the extension kit. The standard base will fit into the extension kit. The extension kit in the colour RAL 9011 is available at request. Maximum weight: 425 kg Frame height Width U mm Colour Part. no RAL 7047 VMF RAL 7047 VMF RAL 7047 VMF RAL 7047 VMF What s in the box: 1 extension kit incl. mounting material and mounting instructions

33 Housings - Server, Patch and Co-location racks (VARICON) Locking systems Locking system for front and rear doors. Different types are available. In the picture you ll see from left to right the following locks: cylinder, swivel handle and swivel handle with combination lock. When ordering the swivel handle, note that the cylinder should be ordered separately. (Except the swivel handle with combination lock). Unique cylinder locks are available for combination locks. Price and delivery period are at request. Door Single door Door Double door Lock type # locking points Unit Part. no. Part. no. Swivel handle Fix Easy 2-points 12 and 16 Co-location, 4 doors Swivel handle Fix Easy 2-points 21 and 25 Co-location, 2 doors MLK0501 MLK Swivel handle Fix Easy 2-points 37, 41, 46 and 50 MLK0503 Swivel handle Fix Easy 2-points 41 MLK1306 Swivel handle Fix Easy 2-points 46 MLK1307 Swivel handle Fix Easy 2-points 50 MLK1308 Cylinder Fix Easy 2-points 12 and 16 MLK0521 Cylinder Fix Easy 2-points 21 and 25 MLK0522 Cylinder Fix Easy 2-points 37, 41, 46 and 50 MLK0523 Swivel handle Fix Easy with combination lock Swivel handle Fix Easy with combination lock Swivel handle Fix Easy with combination lock Swivel handle Fix Easy with combination lock Swivel handle Fix Easy with combination lock Swivel handle Fix Easy with combination lock 2-points 12 and 16 MLK points 21 and 25 MLK points 37, 41, 46 and 50 MLK points 41 MLK points 46 MLK points 50 MLK1328 What s in the box: single pieces incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

34 1 Cylinders for swivel handles Cylinder choice for swivel handle grip. Description Blank Cylinder lock - EK-333 Wilka cylinder Part. no. MLK9001 MLK9003 MLK9004 What s in the box: 1 lock, 2 keys (if needed), incl. mounting material Side panels Side panels are manufactured blank. Square 6 locks ensure that the side panel can be removed quickly. A side plinth is necessary when mounting a side panel. 32 Depth mm Depth mm Depth mm Depth mm Depth mm Unit U Colour Part. no. Part. no. Part. no. Part. no. Part. no. 12 RAL 7047 MSP0001 MSP RAL 7047 MSP0002 MSP RAL 7047 MSP0003 MSP RAL 7047 MSP0004 MSP0104 MSP0204 MSP RAL 9011 MSP0104B MSP0304B 37 RAL 7047 MSP0005 MSP RAL 7047 MSP0006 MSP0106 MSP0206 MSP0306 MSP RAL 9011 MSP0106B MSP0306B MSP0406B 46 RAL 7047 MSP0007 MSP0107 MSP0207 MSP0307 MSP RAL 9011 MSP0107B MSP0307B MSP0407B 50 RAL 7047 MSP0308 MSP RAL 9011 MSP0308B MSP0408B What s in the box: 1 panel, 2 locks, square 6 mm (12-25U), 4 locks square 6 mm (37-50U)

35 Housings - Server, Patch and Co-location racks (VARICON) Divider panel There are two versions divider panels, blank divider panels and divider panels with three cable entry holes. The cable entry holes are 60 mm and filled with rubber cable grommets. The divider panel will be installed with 6 screws. There is no side plinth necessary for mounting the divider panel. Material: Sheet metal Finishing: Sendzimir Depth Unit Unit (Metric) mm U ME With cable entry holes Part. no no MTP yes MTP no MTP yes MTP no MTP yes MTP no MTP yes MTP no MTP yes MTP no MTP yes MTP1408 What s in the box: 1x divider panel incl. mounting material Cylinder lock The cylinder lock replaces the square lock. The cylinder lock gives extra security to the side panels. When the cabinet is 37 HE or higher, use four cylinder locks, when the cabinet is lower two. Description simple cylinder lock Part. no. MSP0199 What s in the box: 1 cylinder and 2 keys Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

36 1 Internal locking mechanism Side panels can only be locked and unlocked from the inside with this internal locking mechanism, it prevents unauthorised access to the cabinet. When the cabinet is 37 U or higher use two locks, when lower use one. Depth mm Location Part. no. 600 Left MSA Right MSA Left MSA Right MSA Left MSA Right MSA What s in the box: 1 internal locking mechanism incl. mounting material 19-inch profiles The 19-inch profiles are supplied with a hole configuration at the front and side to enable mounting equipment and accessories. The aluminium extrusion guarantees a high strength. Another advantage for mounting from the inside of the cabinet is quick change and easy adjustment. Material: Aluminium Finishing: Chromatized Unit U Description Part. no. 12 Flat profiles MPR Flat profiles MPR Flat profiles MPR Flat profiles MPR Flat profiles MPR Flat profiles MPR Flat profiles MPR Flat profiles MPR0608 What s in the box: 2 19-inch profiles and 4 brackets incl. mounting material

37 Housings - Server, Patch and Co-location racks (VARICON) Metric profiles For mounting metric equipment and/or accessories you can choose metric profiles which have to be mounted on mounting depth posts (at least 4). Metric profiles are provided with punched holes. The load-bearing capacity of metric profiles (4 pieces) is 450 kg. Material: Steel Finishing: Galvanised Unit (Metric) ME Part. no. 73 MPR MPR1007 What s in the box: 2 profiles incl. mounting material Number strips 35 The number strip is used to indicate the heights. Description Number strip for 19-inch profile 46U Number strip for metric profile 81ME Number strip for 19-inch profile 50U Part. no. MPR0060 MPR0061 MPR0062 What s in the box: 1 number strip Support spacer 100 mm Spacer for mounting metric profiles in a 800 mm wide cabinet. The number of support spacers depends on the number of mounting depth posts. Material: Sheet metal Finishing: Galvanised Width mm Part. no. 100 MPR0050 What s in the box: 1 support spacer incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

38 1 Depth posts t/b 800 mm (w) Set of 2 or 4 depth posts to help assembly and adjustment of the 19-inch profiles. The depth posts are mounted on the top and bottom window. Depth posts are suitable for large servers. Location: Depth Material: Finishing: Sheet metal Galvanised Depth Location mm Description Part. no. Depth Depth posts MPR0160 Depth Depth posts MPR0190 Depth Depth posts MPR Depth Depth posts MPR0191 Depth Depth posts MPR0162 Depth Depth posts MPR0192 Depth Depth posts MPR0163 Depth Depth posts MPR0193 Depth Depth posts MPR0164 Depth Depth posts MPR0194 What s in the box: 2 or 4 depth posts incl. mounting material

39 Housings - Server, Patch and Co-location racks (VARICON) Top mounting brackets incl. 19-inch profiles A set of 2 19-inch profiles and 2 top mounting brackets. The top mounting brackets guarantee optimal cable entry from the top. The set is suitable for cabinets 800mm wide. When ordering this set, you should also order a set of two deep posts for the lower frame. Material 19-inch profiles: Aluminium Finishing 19-inch profiles: Chrome plated Material top mounting brackets: Steel Finishing top mounting brackets: Blue passivated Height mm Description Part. no. Set with 4 top mounting brackets MPR Flat profiles MPR Flat profiles MPR Flat profiles MPR Flat profiles MPR Flat profiles MPR0708 What s in the box: 2 profiles incl. 2 top mounting brackets and mounting material Depth posts for divided 19-inch mm (w) Set of 4 depth posts to support the 19-inch profiles in 800 mm wide cabinets. Because of their design and bearing ability (450 kilo) they are suitable to support the 19-inch profiles. Location: Left/right Material: Finishing: Sheet metal Galvanised Depth Location mm Description Part. no. Left/right depth posts MPR1170 Left/right depth posts MPR1171 Left/right depth posts MPR1172 Left/right depth posts MPR1173 Left/right depth posts MPR1174 What s in the box: 4 depth posts side-mounted, 4 support spacers left, 4 support spacers right, incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

40 1 Depth posts for divided 19-inch mm (w) Set of 4 depth posts to help the 19-inch profiles to split a 600 mm cabinet. Maximum load bearing with this solution is 450 kg. Location: Left/right Material: Finishing: Sheet metal Galvanised Depth Location mm Description Part. no. Left/right depth posts MPR0170 Left/right depth posts MPR0171 Left/right depth posts MPR0172 Left/right depth posts MPR0173 What s in the box: 4 depth posts incl. mounting material 38 Stability posts 19-inch The stability posts are secured to the 19-inch profiles, they provide added strength and support when heavy equipment is to be used. As a rule the stability posts are mounted in the middle of the cabinet (in height direction). Material: Sheet metal Finishing: Galvanised Width mm Width mm Depth mm Part. no. Part. no. 600 MPR0140 MPR MPR0141 MPR MPR0142 MPR MPR0143 MPR MPR0144 MPR1144 What s in the box: 2 x stability posts, 4 brackets, incl. mounting material. The 800 mm stability posts are delivered with 4 support spacers

41 Housings - Server, Patch and Co-location racks (VARICON) Mounting depth posts Mounting depth posts can be used to mount metric profiles and/or accessories. For metric profiles, at least 4 posts and 4 support spacers (MPR0050) are necessary. Material: Sheet metal Finishing: Galvanised Depth mm Part. no. 600 MPR MPR MPR MPR MPR0154 What s in the box: 1 mounting depth post incl. mounting material 39 Mounting width posts By mounting a width post between the mounting depth posts, a horizontal connection can be created for example for cable guidance. Material: Sheet metal Finishing: Galvanised Width mm Part. no. 600 MPR MPR0101 What s in the box: 1 mounting width post incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

42 1 Cable management Cable ducts 40 The cable ducts are available in two versions: A narrow cable duct on the rear of the cabinet and a broad one across the middle of the cabinet. The narrow cable duct is fitted to the cabinet s rear cable entry, which can be used to feed through limited numbers of cables, with which to connect the servers for instance. The broad cable duct is fitted to the cabinet s middle cable entry, which means that it can be used to feed through large numbers of cables to the left and/or right of the cabinet, as required in patch cabinets. The broad cable duct is also equipped with a partition, which enables the segregation of fiber optic and copper cables from one another. The position of the partition is adjustable. In the case of particularly large cabinets, the two systems - one narrow and one broad duct - can be combined to effectively create a three compartment unit. This enables the adequate segregation of fiber optic, copper and power cables from one another. The cable ducts are fitted with waterfalls to create the appropriate bend radius for the cables. This facilitates the process of feeding the cables in smoothly, while also holding them close to the sides of the cabinet, so that the equipment remains easily accessible. The cable ducts are available in the colours RAL 7047 and RAL Material: Steel Finishing: Height: Depth narrow cable tray: Depth broad cable tray: Powder coated 120 mm 200 mm 600 mm Capacity mm Width (cabinet) Colour Position on the top Description Part. no mm RAL 7047 Rear Narrow cable duct with dual cable entry mm RAL 9011 Rear Narrow cable duct with dual cable entry mm RAL 7047 Rear Narrow cable duct with dual cable entry mm RAL 9011 Rear Narrow cable duct with dual cable entry MCM0300 MCM0300B MCM0301 MCM0301B mm RAL 7047 Partition cable duct small MCM mm RAL 9011 Partition cable duct small MCM0410B mm RAL 7047 Partition cable duct small MCM mm RAL 9011 Partition cable duct small MCM0412B mm RAL 7047 Middle Broad cable duct with adjustable partition and dual cable entry MCM0302

43 Housings - Server, Patch and Co-location racks (VARICON) Capacity mm Width (cabinet) Colour Position on the top Description Part. no mm RAL 9011 Middle Broad cable duct with adjustable partition and dual cable entry mm RAL 7047 Middle Broad cable duct with adjustable partition and dual cable entry mm RAL 9011 Middle Broad cable duct with adjustable partition and dual cable entry MCM0302B MCM0303 MCM0303B What s in the box: 1 narrow cable duct incl. mounting material or 1 broad cable duct incl. mounting material and partition Lids and end plates for cable ducts The cable ducts can also be fitted with lids. These are attached directly to the cable ducts. The lids provide added protection, while also preventing the intrusion of dust. The ends of a row of cable ducts can be sealed off by fitting end plates. The lids and end plates are already cut to size, and are available in the colours RAL 7047 and RAL Material: Steel 41 Finishing: Depth narrow cable tray: Depth broad cable tray: Powder coated 200 mm 600 mm Capacity mm Width (cabinet) Colour Description Part. no mm RAL 7047 Lid for narrow cable duct MCM mm RAL 9011 Lid for narrow cable duct MCM0310B mm RAL 7047 Lid for narrow cable duct MCM mm RAL 9011 Lid for narrow cable duct MCM0311B en 800 mm RAL 7047 End plate for narrow cable duct MCM en 800 mm RAL 9011 End plate for narrow cable duct MCM0320B mm RAL 7047 Lid for broad cable duct MCM mm RAL 9011 Lid for broad cable duct MCM0312B mm RAL 7047 Lid for broad cable duct MCM mm RAL 9011 Lid for broad cable duct MCM0313B en 800 mm RAL 7047 End plate for broad cable duct MCM en 800 mm RAL 9011 End plate for broad cable duct MCM0321B What s in the box: incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

44 1 Cable duct for VariCondition-H2O and VariCondition-DX If VariCondition-H2O and VariCondition-DX are integrated between a row of cabinets (in-row cooling), then the cable ducts can be laid over the tops of the cooling units. The cable ducts are available in two versions: a narrow cable duct and a broad one. The cable ducts are available in RAL colours 7047 and Material: Steel Finishing: Height: Depth narrow cable tray: Depth broad cable tray: Powder coated 120 mm 200 mm 600 mm Width mm Colour Description Part. no. 200 RAL 7047 Narrow cable duct (200 mm) for VariCondition-H2O and VariCondition-DX MCM RAL 9011 Narrow cable duct (200 mm) for VariCondition-H2O and VariCondition-DX MCM0316B RAL 7047 Broad cable duct for VariCondition-H2O and VariCondition-DX with adjustable partition and dual cable entry 600 RAL 9011 Broad cable duct for VariCondition-H2O and VariCondition-DX with adjustable partition and dual cable entry MCM0317 MCM0317B What s in the box: 1 narrow cable duct incl. mounting material or 1 broad cable duct incl. mounting material and partition Lids for cable ducts for VariCondition-H2O and -DX Lids are available for the cable ducts for VariCondition-H2O and VariCondition-DX. The lids are directly attached to the cable ducts, providing added protection and shielding the cables from dust. Material: Steel Finishing: Depth narrow cable tray: Depth broad cable tray: Powder coated 200 mm 600 mm Width mm Colour Part. no. 200 RAL 7047 MCM RAL 9011 MCM0318B 600 RAL 7047 MCM RAL 9011 MCM0319B What s in the box: incl. mounting material

45 Housings - Server, Patch and Co-location racks (VARICON) Cable bridges Cable bridges can be use for traversing hot or cold aisles. The cable bridge is compatible with both narrow and broad cable ducts, and can also be used in combination with a Cold Corridor. Cable bridges are available in three sizes for traversing aisles measuring between 990 mm and 1750 mm, between 1235 mm and 2000 mm and between 2000 mm and 3700 mm (from cable duct to cable duct). The cable bridges are fitted with a telescopic system so that they can be adjusted to bridge the distance between one cable duct and another without needing to be sawn to size. The cable bridges can be installed at various distances along the aisle. Cable bridges can be used for reducing the number of branches from the main source, or for achieving interconnectivity within the Cold Corridor, for instance. Several bridges may used, depending on the required capacity, or to segregate different cables. The cable bridges are available in the RAL colours 7047 and Material: Steel Finishing: Height: Capacity: Powder coated 120 mm 150 mm 43 Colour Part. no. RAL mm to 1750 mm MCM0306 RAL mm to 2000 mm MCM0307 RAL mm to 3700 mm MCM0308 RAL mm to 1750 mm MCM0306B RAL mm to 2000 mm MCM0307B RAL mm to 3700 mm MCM0308B What s in the box: cover with mounting materials Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

46 1 Lids for cable bridges The cable bridges can be fitted with covers. The covers are directly attached to the cable bridges, providing added protection and shielding the cables from dust. The covers can overlap each other. This allows several covers to be used, ensuring that the cable bridge is adequately protected. The covers are available in the RAL colours 7047 and Material: Steel Finishing: Capacity: Powder coated 150 mm length Colour mm Part. no. RAL MCM0323 RAL MCM0322 RAL MCM0323B 44 RAL MCM0322B What s in the box: incl. mounting material

47 Housings - Server, Patch and Co-location racks (VARICON) Mounting bracket including cable guides These cable guides are ideal for swift and efficient cabling. A cable guide is 87 mm long, and can be detached without the use of tools. Cabling per 1U is also available. The bend radius is highly suitable for fiber optics. There is space for 24 cables per 1 U. Flame class: UL94-V0 Halogen-free Description Material Colour Part. no. 6U mounting bracket for 19-inch profile incl. 6 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 10 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 10 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 10 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 38 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 76 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 10 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 43 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 86 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 47 cable guides Polyamide RAL 5015 MCM U mounting bracket for 19-inch profile incl. 94 cable guides Polyamide RAL 5015 MCM Cable guides (ordered separately) Polyamide RAL 5015 MCM2009 What s in the box: Mounting bracket, cable guides including fixing materials Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

48 1 Cable cleats The cable cleats ensure optimum cabling efficiency. Cable cleats are 75 mm long. The cable cleats can be clicked onto each other (length of 2 units: 150 mm / length of 3 units: 225 mm). The maximum bearing capacity of three cable cleats mounted on top of each other is 15 kg if the weight is distributed evenly. The 60 mm diameter is particularly suitable for glass fiber cables. Flame class: UL94-V0 Description Material Colour Part. no. 2 cleats including 2U mounting plate RAL 7047 Polyamide RAL 5015 MCM cleats including 2U mounting plate RAL 9011 Polyamide RAL 5015 MCM2010B 1 cleat (can be ordered separately) Polyamide RAL 5015 MCM What s in the box: 2U mounting plate including cleats and fixing materials Mounting bracket (4x) for the cable cleat + 4x cable cleat The cable cleats are used to make cabling as efficient as possible. Positioning the cable cleats alongside the 19-inch profile allows the cables to be guided in an optimum fashion. The mounting brackets can be attached to the 19-inch profile at any height. The cable cleats can be clicked onto each other (length of 2 units: 150 mm / length of 3 units: 225 mm). Material: Steel Finishing: Unit: Powder coated 1 U Description Mounting bracket (4x) for the cable cleat + 4x cable cleat Part. no. MCM2020 What s in the box: 4 x 1U mounting brackets and 4 x cable cleats with mounting materials

49 Housings - Server, Patch and Co-location racks (VARICON) Shunting eye horizontal The shunting eye for front mounting 1HE 40 x 86 mm (w x d) is used for cable management and can be mounted on 19-inch profiles. Width: 40 mm Depth: 86 mm Description Part. no. 1 U - 1 piece MCM U pieces MCM1002 What s in the box: incl. mounting material Shunting eye horizontal The shunting eye is used for cable management. The shunting eye can be mounted on the 19-inch profiles as well as on the height posts of the frame. Width: 84 mm 47 Depth: 86 mm Description Part. no. 2 U - 1 piece MCM U pieces MCM1004 What s in the box: incl. mounting material Shunting eye vertical The shunting eye for front mounting vertical 45 x 74 mm (w x d) is used for cable management and can be mounted on 19-inch profiles. Width: 45 mm Depth: 74 mm Description vertical - 1 piece vertical pieces Part. no. MCM0001 MCM1001 What s in the box: incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

50 1 Shunting eye vertical The shunting eye for side mounting 19-inch x 154 mm (w x d) is used for cable management and can be mounted on 19-inch profiles. Width: 110 mm Depth: 154 mm Description mounting on 19-inch - 1 piece mounting on 19-inch pieces Part. no. MCM0007 MCM1007 What s in the box: incl. mounting material Shunting eye vertical 48 The shunting eye is used for cable management. The shunting eye can be mounted on the height posts of the frame. Width: 85 mm Depth: 165 mm Description mounting on frame post - 1 piece mounting on frame post pieces Part. no. MCM0008 MCM1008 What s in the box: incl. mounting material Shunting eye vertical The shunting eye is used for cable management. The shunting eye can be mounted on the height posts of the frame. Width: 130 mm Depth: 120 mm Description mounting on frame post - 1 piece mounting on frame post pieces Part. no. MCM0009 MCM1009 What s in the box: incl. mounting material

51 Housings - Server, Patch and Co-location racks (VARICON) Shunting eye vertical The shunting eye is used for cable management. The shunting eye can be mounted on the height posts of the frame. Width: 77 mm Depth: 100 mm Description mounting on frame post - 1 piece mounting on frame post pieces Part. no. MCM0010 MCM1010 Cable guidance fiber optics Cable guidance with a controlled bend radius and a cable pull relief which meets the requirements of fiber optics. The cable guidance is RAL 9010 coloured. 49 Width Description mm Part. no. Left 86 MCM0023 Right 86 MCM0024 What s in the box: 1 cable guidance fiber optics incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

52 1 Cable trays, sinked The cable tray creates various possibilities for vertical cable management in the cabinet. Cables can be attached to the cable tray over the full height of the cabinet. Cable tray is mounted on the top and bottom frame. Material: Sheet metal Finishing: Galvanised Unit Width U mm Part. no MCM MCM MCM MCM MCM MCM MCM MCM0138 What s in the box: 1 cable tray incl. mounting material Cable trunks The cable trunk is made from grey PVC and can be mounted to the depth posts. Trunk contains lid and break-out options on the side for flexibel cable management. Material: PVC Colour: Grey Height Width Depth mm mm mm Part. no MCM MCM MCM MCM0053 What s in the box: 1 cable trunk incl. mounting material

53 Housings - Server, Patch and Co-location racks (VARICON) Cable trunk front - back telescopic A telescopic cable trunk can be used for guiding cables from front to rear. For airflow optimisation, in combination with side skirts, cable entry foam can be used. (MCS5004 RAL 7047, MCS5004B RAL 9011) The cable tray can be extended from 550 until 800 mm. Cable tray dimensions: 43 x 43 mm Material cable tray: Sheet metal Finishing: Sendzimir Material cable guidance: Plastic (Noryl; halogen free) Colour: Blue Variable depth mm Part. no. MCM0028 What s in the box: Cable tray including mounting material Shunting comb with 4 or 5 teeth 51 The shunting comb allows easy routing of cables. The rings are available in metal and plastic. Material: Sheet metal Finishing: Powder coated Description Colour Part. no. with 4 metal rings, 2 x 1/2 HE RAL 7047 MCM0011 with 4 metal rings, 2 x 1/2 HE RAL 9011 MCM0011B with 5 synthetic teeth, 1 x 1U RAL 9011 MCM0013 What s in the box: 1 shunting comb incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

54 1 Velcro tapes Velcro tapes to bundle cables and for fitting cables on various cable trays quickly and securely. Description Roll - length 10 m / width 16 mm Part. no. FDH1610 What s in the box: 10 meter velcro 52 Cable overlength cassette Cable overlength cassette for easy and effective cable management. Material: Sheet metal Colour: RAL 9011 Unit: 2 U Unit Material Colour U Part. no. Sheet metal RAL MCM1111 What s in the box: 1 cable overlength cassette incl. mounting material

55 Housings - Server, Patch and Co-location racks (VARICON) 53 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

56 1 Airflow optimisation components Airflow optimisation package With a view to catering to the varying requirements of our customer base, we currently have a range of three airflow optimisation kits available: Basic, Standard en Plus. Airflow optimisation solution utilises depth of the 19 rack Basic Metal mm Standard Metal and foam mm Plus Metal, foam and foil mm The airflow optimisation kits cannot be retrofitted. However, they can be configured in a rack using our Sales Configurator. Our sales department can provide you with further information. 54 Unit Width Air flow optimisation U mm Colour Part. no. Basic RAL 7047 MCS0906 Basic RAL 9011 MCS0906B Basic RAL 7047 MCS0916 Basic RAL 9011 MCS0916B Basic RAL 7047 MCS0907 Basic RAL 9011 MCS0907B Basic RAL 7047 MCS0917 Basic RAL 9011 MCS0917B Basic RAL 7047 MCS0908 Basic RAL 9011 MCS0908B Basic RAL 7047 MCS0918 Basic RAL 9011 MCS0918B Standard RAL 7047 MCS0926 Standard RAL 9011 MCS0926B Standard RAL 7047 MCS0936 Standard RAL 9011 MCS0936B Standard RAL 7047 MCS0927 Standard RAL 9011 MCS0927B Standard RAL 7047 MCS0937 Standard RAL 9011 MCS0937B Standard RAL 7047 MCS0928 Standard RAL 9011 MCS0928B Standard RAL 7047 MCS0938 Standard RAL 9011 MCS0938B

57 Housings - Server, Patch and Co-location racks (VARICON) Unit Width Air flow optimisation U mm Colour Part. no. Plus RAL 7047 MCS0946 Plus RAL 9011 MCS0946B Plus RAL 7047 MCS0956 Plus RAL 9011 MCS0956B Plus RAL 7047 MCS0947 Plus RAL 9011 MCS0947B Plus RAL 7047 MCS0957 Plus RAL 9011 MCS0957B Plus RAL 7047 MCS0948 Plus RAL 9011 MCS0948B Plus RAL 7047 MCS0958 Plus RAL 9011 MCS0958B What s in the box: Side skirts, Side skirts side panels, top and bottom plate and all other products for airflow optimisation including mounting material. 55 Switching & routing inlet duct For the 1U and 2U switches Minkels developed an inlet duct. The equipment will be installed at the rear of the rack and will get the cold air from the front of the rack (Cold Aisle). This makes it possible that the cables will be at the rear of the rack and the product will get enough cold air to be cooled down. Installation in the rack is easy. The 1U version can be extended from 210 until 300 mm. The 2U version can be extended from 350 until 500 mm. Unit Width 19-inch Variable depth U Airflow equipment Part. no. yes mm 1 Back to front MRS0001 yes mm 2 Back to front MRS0002 What s in the box: Inlet duct including mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

58 1 Minkels Fix Easy front panel When developing the front panel, emphasis was put on quick and easy installation, which now takes no time at all. Special plastic fasteners ensure the front panel is fixed between the 19-inch profiles, no tools required! The front panels are available in RAL 7047 and RAL Material: Steel Thickness: 19-inch: Finishing: 1.0 mm Yes Powder coated Unit U Description Colour Part. no. 1 1 Front panel RAL 7047 MFE Front panel RAL 9011 MFE0101B Front panel RAL 7047 MFE Front panel RAL 9011 MFE0102B 3 1 Front panel RAL 7047 MFE Front panel RAL 9011 MFE0103B 6 1 Front panel RAL 7047 MFE Front panel RAL 9011 MFE0104B 9 1 Front panel RAL 7047 MFE Front panel RAL 9011 MFE0105B What s in the box: 1 front panel incl. plastic fasteners

59 Housings - Server, Patch and Co-location racks (VARICON) Minkels Fix Easy front panels (set of 4 or 6) When developing the front panel, emphasis was put on quick and easy installation, which now takes no time at all. Special plastic fasteners ensure the front panel is fixed between the 19-inch profiles, no tools required! The front panels are available in RAL 7047 and RAL The set contains 4 or 6 front panels including plastic fasteners. Material: Steel Thickness: 19-inch: Finishing: 1.0 mm Yes Powder coated Unit U Description Colour Part. no. 1 Set of 6 front panels RAL 7047 MFE Set of 6 front panels RAL 9011 MFE0111B 57 2 Set of 6 front panels RAL 7047 MFE Set of 6 front panels RAL 9011 MFE0112B 3 Set of 6 front panels RAL 7047 MFE Set of 6 front panels RAL 9011 MFE0113B 6 Set of 4 front panels RAL 7047 MFE Set of 4 front panels RAL 9011 MFE0114B What s in the box: 4 or 6 front panels incl. plastic fasteners Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

60 1 Minkels Fix Easy front panels (mix) When developing the front panel, emphasis was put on quick and easy installation, which now takes no time at all. Special plastic fasteners ensure the front panel is fixed between the 19-inch profiles, no tools required! The front panels are available in RAL 7047 and RAL The mix contains: 24 panels 1U = 24U 24 panels 2U = 48U 24 panels 3U = 72U 16 panels 6U = 96U In total 240 U Material: Steel 19-inch: Finishing: Yes Powder coated 58 Description Colour Part. no. Mix of front panels (240 U in total) RAL 7047 MFE1120 Mix of front panels (240 U in total) RAL 9011 MFE1120B What s in the box: The mix contains different front panels incl. plastic fasteners Plastic front panel The plastic front panel serves to seal off the 19-inch area so that it is airtight. The front panel have been specially designed to make installation easy and to form an airtight 19-inch seal. The front panel is easy to mount between the 19-inch profiles. No materials are needed for securing the front panel. Air tight accessories enable energy savings by preventing air leakage. Material: ABS (UL94-V0) Colour: RAL 9005 Description Plastic front panel Part. no. MFE1105 What s in the box: 25 1U plastic front panels incl. mounting material The plastic front panel is available from 1 September 2012

61 Housings - Server, Patch and Co-location racks (VARICON) Side skirts The side skirts are mounted in 600 mm and 800 mm wide cabinets next to the 19-inch profiles. They prevent the cold air from leaking along the 19-inch profiles. The side skirts could be blind or contains 3 x 2 HE 19- inch cut outs. In all the side skirts for 800 mm width rack rubber cable grommets are placed at the top and bottom of each side skirt. The front panels are not included and have to be ordered separately, for example the Minkels plastic front panels MFE1105. Unit U Colour Description Cut-outs Part. no. 41 RAL 7047 Suitable for 800 mm wide cabinets Blank MCS RAL 7047 Suitable for 800 mm wide cabinets 3x 2U 19-inch MCS RAL 9011 Suitable for 800 mm wide cabinets Blank MCS0206B 41 RAL 9011 Suitable for 800 mm wide cabinets 3x 2U 19-inch MCS0006B 41 Sendzimir Suitable for 600 mm wide cabinets Blank MCS RAL 7047 Suitable for 800 mm wide cabinets Blank MCS RAL 7047 Suitable for 800 mm wide cabinets 3x 2U 19-inch MCS RAL 9011 Suitable for 800 mm wide cabinets Blank MCS0207B 46 RAL 9011 Suitable for 800 mm wide cabinets 3x 2U 19-inch MCS0007B 46 Sendzimir Suitable for 600 mm wide cabinets Blank MCS RAL 7047 Suitable for 800 mm wide cabinets Blank MCS RAL 7047 Suitable for 800 mm wide cabinets 3x 2U 19-inch MCS RAL 9011 Suitable for 800 mm wide cabinets Blank MCS0208B 50 RAL 9011 Suitable for 800 mm wide cabinets 3x 2U 19-inch MCS0008B 50 Sendzimir Suitable for 600 mm wide cabinets Blank MCS0108 What s in the box: One set contains 2 side skirts incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

62 1 Side skirt side panels The side skirt side panels are used in combination with the side skirts and prevent cold air from leaking to the side of the cabinet. The panels are mounted perpendicular to the side skirts. Unit Depth Air flow optimisation package U mm Colour Part. no. Basic RAL 7047 MCS0116 Basic RAL 9011 MCS0116B Basic RAL 7047 MCS Basic RAL 9011 MCS0316B Basic RAL 7047 MCS0117 Basic RAL 9011 MCS0117B Basic RAL 7047 MCS0317 Basic RAL 9011 MCS0317B Basic RAL 7047 MCS0118 Basic RAL 9011 MCS0118B Basic RAL 7047 MCS0318 Basic RAL 9011 MCS0318B Standard RAL 7047 MCS0136 Standard RAL 9011 MCS0136B Standard RAL 7047 MCS0137 Standard RAL 9011 MCS0137B Standard RAL 7047 MCS0138 Standard RAL 9011 MCS0138B Plus RAL 7047 MCS0126 Plus RAL 9011 MCS0126B Plus RAL 7047 MCS0026 Plus RAL 9011 MCS0026B Plus RAL 7047 MCS0127 Plus RAL 9011 MCS0127B Plus RAL 7047 MCS0027 Plus RAL 9011 MCS0027B Plus RAL 7047 MCS0128 Plus RAL 9011 MCS0128B Plus RAL 7047 MCS0028

63 Housings - Server, Patch and Co-location racks (VARICON) Unit Depth Air flow optimisation package U mm Colour Part. no. Plus RAL 9011 MCS0028B What s in the box: One set contains a side skirt side panel incl. mounting material Side skirt seal kit The side skirt seal kit is used to seal the gap between the side skirts in case of bayed cabinets. This will prevent cold air from leaking to the back side of the cabinet. The side skirt seal kit is available in 46 U. In case you would like to use the kit in smaller cabinets, please note that it is possible to cut the kit to the right size. The side skirt seal kit exists of fire retardant foam (UL94). 61 Unit U Material Colour Part. no. 46 Rubber Grey MCS0011 What s in the box: 1 vertical seal strip, 1 horizontal seal strip Heat baffle The heat baffle is used to guide the incoming cold air, which enters from the raised floor, to the front of the cabinet. Therefore, all cold air will be used to cool the equipment and can not leak away. The heat baffle is adjustable in height between 3 and 6 U. Technical data Description Colour Part. no. Scalable between 1-16 kw Adjustable between 3-6 U RAL 7047 MCS2001 Scalable between 1-16 kw Adjustable between 3-6 U RAL 9011 MCS2001B What s in the box: 1 heat baffle incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

64 1 Cable entry plates mounted in the side skirts The cable entry plates are mounted in the 2U x 19-inch cut outs in the side skirts and are used for air tight cable entry. The accessories that incorporate foam are extra air tight. Air tight accessories enable energy savings by preventing air leakage. The airtight front panel can also be used to cover cut outs. Unit U Colour Description Part. no. 2 RAL 7047 Cable entry plate MCS RAL U Cable entry foam 1U Front panel MCS RAL 7047 Cable entry foam MCS RAL 7047 Front panel in side skirt MCS RAL 9011 Cable entry plate MCS5002B 62 2 RAL U Cable entry foam 1U Front panel MCS5005B 2 RAL 9011 Cable entry foam MCS5004B 2 RAL 9011 Front panel in side skirt MCS5001B What s in the box: incl. mounting material Cable entry plates between the 19-inch profiles These cable entry plates are suitable for feeding through cables. The cable entry plates are mounted between the 19-inch profiles. The accessories that incorporate foam are extra air tight. Air tight accessories enable energy savings by preventing air leakage. Unit U Colour Description Part. no. 1 RAL 7047 Cable entry foam MCS RAL 9011 Cable entry foam MCS5006B 2 RAL 7047 Cable entry plate MCS RAL 9011 Cable entry plate MCS5002B What s in the box: incl. mounting material

65 Housings - Server, Patch and Co-location racks (VARICON) Accessories How to choose the right shelf for a rack? Does the rack have No Only full-size shelves can be used. FULL-SIZE SHELVES For example: Yes Will the shelf be supported by four No 63 Yes FOUR-POINT SHELVES For example: Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

66 1 Minkels Fix Easy shelves This shelf has a variable depth, so installation no longer depends on the distance between the 19"-profiles. When developing the shelf, emphasis was put on quick and easy installation, which now takes no time at all. Special plastic clips ensure the shelf is fixed on the 19"-profiles, no tools required! An extra set of 4 fixation clips is available, part. no is MFE0020. Weight capacity is based on a maximum rail extension of 150 mm. Shelves with a depth of 650 mm or more will also be available in black RAL Depth Maximum weight mm Construction depth kg Useable space Colour Part. no. White MFE x 250 RAL 7047 MFE x 350 RAL 7047 MFE x 500 RAL 7047 MFE x 500 RAL 9011 MFE0003B x 650 RAL 7047 MFE x 650 RAL 9011 MFE0004B What s in the box: 1 shelf, 2 guiding rails, 4 fixation clips

67 Housings - Server, Patch and Co-location racks (VARICON) Variable shelves Variable shelf, which means the depth of the shelf does not have to be equal to the distance between the 19-inch profiles. The shelf is attached to the 19-inch profiles. The maximum weight is valid in case of equal weight distribution. Construction space: 12 mm Material: Finishing: Steel Powder coated Colour: RAL 7047 Depth Maximum weight mm Construction depth kg Useable space Part. no x 250 MPL X 350 MPL X 500 MPL x 700 MPL What s in the box: 1 shelf, 2 mounting rails, incl. mounting material Variable shelves 19-inch 100 kg Maximum perforated variable shelf, with a maximum weight of 100 kilo. Variable means the depth of the shelf does not have to be equal to the distance between the first and last 19-inch profiles. The shelf is attached to the 19-inch profiles. The maximum weight is valid in case of equal weight distribution. Construction space: 25 mm Maximum weight: Material: Finishing: 100 kg Steel Powder coated Depth mm Construction depth Useable space Colour Part. no x 700 RAL 7047 MPL x 700 RAL 9011 MPL0014B x 800 RAL 7047 MPL x 800 RAL 9011 MPL0015B What s in the box: 1 shelf, 2 mounting rails, incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

68 1 Variable telescopic shelves A perforated shelf mounted on telescopic rails slides out smoothly, which makes it easy to use. The shelf is attached to the 19-inch profiles. The maximum weight is valid in case of equal weight distribution. Construction space: 55 mm Material: Finishing: Steel Powder coated Colour: RAL 7047 Depth Maximum weight Retractable length mm Construction depth kg Useable space mm Part. no x MPL x MPL x MPL What s in the box: 1 telescopic shelf incl. mounting rails and mounting material Cantilever shelves Semi floating perforated shelf of 2 U that can be mounted on the 19 inch profiles. The maximum weight is valid in case of equal weight distribution. Maximum weight: 12 kg Material: Finishing: Steel Powder coated Depth Unit mm U Description Colour Part. no Half floating 2 U RAL 7047 MPL Half floating 2 U RAL 9011 MPL0312B Half floating 2 U RAL 7047 MPL0312 What s in the box: 1 cantilever shelf incl. mounting material

69 Housings - Server, Patch and Co-location racks (VARICON) Full size shelves Perforated full size shelf which optimally uses the width and depth of the cabinet. Attached to the height posts or mounting posts. The maximum weight is valid in case of equal weight distribution. Maximum weight: 75 kg Description: Material: Finishing: fixed mounted Steel Powder coated Colour: RAL 7047 Width Depth mm mm Useable space Part. no x 500 MPL x 700 MPL x 500 MPL x 700 MPL What s in the box: 1 shelf, 4 mounting brackets, incl. mounting material Cable guide for telescopic shelf Plastic cable guiding of synthetic material for telescopic shelfs to avoid damage to the cables during the movement of the shelf. Retractable length mm Part. no. 700 MPA0003 What s in the box: 1 cable guide for telescopic shelf, 1 height post bracket, 1 depth post bracket, 1 corner bracket Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

70 1 Cage nuts Caged nuts for mounting applications. They can be mounted in the holes in the front and back of the 19 inch profiles. Material: Steel Finishing: Galvanised Diameter Description Part. no. M5 Cage nuts M5 - (20 pieces) MFM0001 M5 Cage nuts M5 - (100 pieces) MFM0002 M6 Cage nuts M6 - (20 pieces) MFM0003 M6 Cage nuts M6 - (100 pieces) MFM What s in the box: When you order 100 cage nuts you also receive a cage nut mounting tool Decorative screws with washer The decorative screws with cross head and black plastic ring can be used with cage nuts for mounting at the front and side of the 19-inch profiles. Diameter Description Part. no. M5 X 16 Decorative screws with washer (black) M5 - (20 pieces) MFM0010 M5 X 16 Decorative screws with washer (black) M5 - (100 pieces) MFM0011 M6 X 16 Decorative screws with washer (black) M6 - (20 pieces) MFM0012 M6 X 16 Decorative screws with washer (black) M6 - (100 pieces) MFM0013

71 Housings - Server, Patch and Co-location racks (VARICON) Baying kit The baying kit is used to connect two cabinets. Different combinations of internal baying bushes and external baying plates are available. The external baying plate can be mounted outside at the height profiles and is invisible when the door is closed. At least 2 connection points should be used in front and back. From 41 HE we advise 3 sets at the front and 3 sets at the back. Diameter: M4 Description Colour Part. no. Set for internal and external baying RAL 7047 MFM0050 Set for internal and external baying RAL 9011 MFM0054 Baying set external RAL 7047 MFM0051 Baying kit external RAL 9011 MFM0052 Baying kit internal Blue MFM0053 What s in the box: The sets MFM0050 and MFM0054 contain 1 baying bush and 1 baying plate incl. mounting materials. The set MFM0051 and MFM0052 contain 1 baying plate incl. mounting materials. The set MFM0053 contains 1 internal baying bush incl. mounting material 69 Mounting brackets universal (set of 4) The universal mounting-brackets can, among other things, be used to mount accessories. Finishing Galvanised Part. no. MCE0410 What s in the box: 4 brackets incl. mounting material Potential equalising rail The potential equalising rail is 200 mm long, has 1 wire terminal of mm² and 10 wire terminals of 2,5-25 mm² of galvanised sinked steel. The potential equalising rail can be mounted on the depth posts as well as the below window. length mm Part. no. 200 MER0003 What s in the box: 1 rail incl. mounting materials Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

72 1 Earth rails copper The grounding strip (20x5mm) is made from copper and can be fitted to the mounting depth posts, 19-inch profiles and frames vertically. Material: Copper Finishing: None Part. no. 41 MER MER0107 What s in the box: 1 rail, 1 wrist band earth point, 1 earthing cable, incl. mounting material and mounting manual Earthing cables (set) 70 Set of grounding cables, consisting of 6 grounding cables: 3 x 200 mm and 3 x 400 mm, supplied with a M-5 lug on both ends for mounting to pre-determined grounding points in the cabinet. Material Colour Part. no. Copper Yellow/green MER0001 What s in the box: 3 earthing cables 200 mm, 3 earthing cables 400 mm, incl. mounting material Document holder The document holder allows documents to be stored in a variety of places in the cabinet. The document holder can easily be mounted by using double sided tape. Material: Polystyrol Colour: Grey Part. no. MDH0001 What s in the box: 1 document holder, self-adhesive

73 Housings - Server, Patch and Co-location racks (VARICON) Lighting set The lighting set can be mounted on 19-inch as well as on the bottom or top frame, without loss of rack space. Description with outlet - 19-inch x 41 mm - 14 Watt - 230VAC CE - ENEC - TÜV 19-inch x 30 mm - 14 Watt - 230VAC CE - ENEC - TÜV Part. no. MLS0001 MLS0002 What s in the box: 1 lighting set with socket and cable, 1 mounting bracket, incl. mounting material 71 Door switch for lighting set Door switch for lighting set. Switch can be mounted on the bottom or top frame as well as the height post. Part. no. MLS0005 What s in the box: 1 door switch with cable, 1 mounting bracket, incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

74 1 Mounting air closure plate The mounting air closure plate makes it possible for a TFT screen (max. 17 inch) to be mounted in a 19-inch area of a cabinet. Suspension is made possible using a square slot measuring 4 x 75 mm and 4 x 100 mm. The mounting air closure plate provides airtight partitioning. The screen s cables are fed towards the back of the plate. Air tight accessories enable energy savings by preventing air leakage. Material: Steel Finishing: Unit: Powder coated 8 U Colour: RAL 9011 Unit U Description Part. no inch mounting air closure plate for max. 17-inch TFT monitor MPM What s in the box: 8U mounting plate with mounting materials Corner guide rails Variable corner guide rails with variable fixing that uses only 1U mounting space. Variable fixing means the depth of the corner guide rail does not have to be equal to the depth between the 19-inch profiles. The edge is 40 mm which supports network equipment. Material: Sheet metal Finishing: Maximum weight: Galvanised 100 kg Construction depth Part. no MPR MPR MPR0313 What s in the box: 1 corner guide rail left and 1 corner guide rail right incl. mounting material

75 Housings - Server, Patch and Co-location racks (VARICON) Wall mounting A set of brackets to attach your Varicon-M cabinet to the wall, the brackets support the top and bottom of the frame. Suitable for cabinets higher than 21 U or 37 ME. Template included. Width mm Part. no. MRW0001 What s in the box: 2 brackets incl. mounting material for the cabinet 73 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

76 74 1

77 CATALOGUE 2014 Housings - LANRack (VARICON) Pre-assembled Components Cable management Airflow optimisation Accessories Housings - LANRack (VARICON)

78 2 Pre-assembled Rack - stand alone The stand alone rack is 800 mm wide, 800 mm deep and 42 HE high. The rack exists of a steel basic frame with levelling feet. Demountable side panels are included. The base & roof have two cut-outs. The rack is provided with four universal 19-inch profiles. The front door contains clear glass, hinges right and is provided with a swivel handle Fix Easy with blind stop. The back door is blind. 76 Width Depth Unit mm mm U Description Part. no Stand-alone MLR2111 Baying rack The baying rack is 800 mm wide, 800 mm deep and 42 HE high. The rack exists of a steel basic frame with levelling feet. Side panels and baying kits are not included but can be ordered separately (side panel MLR3411, baying kit MLR4201). The rack is provided with four universal 19-inch profiles. The base & roof have two cut-outs. The front door contains clear glass, hinges right and is provided with a swivel handle Fix Easy with blind stop. The back door is blind. Width Depth Unit mm mm U Description Part. no Baying rack MLR1111

79 Housings - LANRack (VARICON) Open frame The steel basic frame is provided with four 19-inch profiles and will be delivered with levelling feet. The frame is 542 mm wide, 740 mm deep and 42 HE high. The compact frame can easily be moved through each door. Width Depth Unit mm mm U Description Part. no Open frame MLR Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

80 78 2

81 Housings - LANRack (VARICON) Components Blind door Steel door without perforation. The door will be delivered with mounting brackets, hinges and a swivel handle Fix Easy with blind stop. Width mm Unit 800 U Colour Part. no. 42 RAL 7047 MLR3211 What s in the box: 1 door with hinges, mounting brackets and a swivel handle Fix Easy 79 Door glass clear Steel frame with clear safety glass panel. The door will be delivered with mounting brackets, hinges and a swivel handle Fix Easy with blind stop. Width mm Unit 800 U Colour Part. no. 42 RAL 7047 MLR3311 What s in the box: 1 door with hinges, mounting brackets and a swivel handle Fix Easy Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

82 2 Side panel The blind side panels are fast and easily removable by means of a square 6 lock. A mounting bracket is included. Depth mm Unit 800 U Colour Part. no. 42 RAL 7047 MLR3411 What s in the box: 1 panel with square 6 lock and a mounting bracket. 80 Top Top with four press-out recesses. The top can be used in combination with cable feed-through and ventilation. Material: Steel Finishing: Powder coated Width Depth cut out mm mm pcs Colour Part. no RAL 7047 MLR3112 What s in the box: 1 top incl. mounting material

83 Housings - LANRack (VARICON) Cable management Shunting eye horizontal The shunting eye for front mounting 1HE 30 x 86 mm (w x d) is used for cable management and can be mounted on 19-inch profiles. Width: 30 mm Depth: 86 mm Description Part. no. 1 U - 1 piece MCM U pieces MCM1002 What s in the box: incl. mounting material 81 Shunting eye horizontal The shunting eye is used for cable management. The shunting eye can be mounted on the 19-inch profiles as well as on the height posts of the frame. Width: Depth: 84 mm 86 mm Description Part. no. 2 U - 1 piece MCM U pieces MCM1004 What s in the box: incl. mounting material Shunting eye vertical The shunting eye for side mounting 19-inch x 154 mm (w x d) is used for cable management and can be mounted on 19-inch profiles. Width: 110 mm Depth: 154 mm Description mounting on 19-inch - 1 piece mounting on 19-inch pieces Part. no. MCM0007 MCM1007 What s in the box: incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

84 2 Shunting eye vertical The shunting eye for front mounting vertical 35 x 64 mm (w x d) is used for cable management and can be mounted on 19-inch profiles. Width: 35 mm Depth: 64 mm Description vertical - 1 piece vertical pieces Part. no. MCM0001 MCM1001 What s in the box: incl. mounting material Cable tray 82 Cable trays are used for vertical cable management. The cable tray can be mounted easily to the vertical frame post. Material: Sheet metal Finishing: Galvanised Unit Width U mm Part. no MLR4301 What s in the box: 1 cable tray incl. mounting material Cable entry brush Brush for cable entry. The brush will be assembled between the plate/ roof and the side panel. Description Technical data Part. no. Cable entry brush 800 mm deep MLR4501 What s in the box: 1 cable entry brush incl. mounting material

85 Housings - LANRack (VARICON) Cable entry brush Brush for cable entry. The brush can be mounted in the base plate or roof. Description Technical data Part. no. Set of cable entry brushes max opening 153 x 427 mm MBM1003 What s in the box: 1 cable entry brush incl. mounting material 83 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

86 2 Airflow optimisation Fan unit incl. 2 fans and wiring This fan unit is provided with two fans. The fan unit should be fixed in the base/roof plate. Description Technical data Colour Part. no. Fan unit incl. 2 fans and wiring RAL VAC - 310m³/h - 48dB - 44Watt RAL 9011 MBM1004B 84 Fan unit including 2 fans and wiring RAL VAC - 320m³/h - 48dB - 44Watt RAL 9011 MBM1007B What s in the box: 1 fan unit incl. mounting material Fan-unit with IEC connectors The fan unit contains three axial fans. The maximum flow is 480 m³/h, under normal load this will be over 300m³/h. All connections are of the IEC-320 C13 type. The fan units can be daisy chained using a standard cable with IEC-320 C13 / C14 connectors. All cables are included in the set. Optional, with the thermostat MWETF01 you can switch this fan unit automatically. What s in the box: 1 fan unit, 1 power cable, 1 extension cable incl. mounting material

87 Housings - LANRack (VARICON) Accessories Baying kit Baying kits are needed to bay racks. Description MLR4201 is suitable for baying racks (MLR1111) MLR4202 is suitable for baying open frames (MLR0111) MLR4203 is suitable for baying to Varicon-M racks Part. no. MLR4201 MLR4202 MLR What s in the box: Baying kit MLR4201 contains 4 baying plates. Baying kit MLR4202 contains 4 strips. Baying kit MLR4203 contains 2 baying plates. All baying kits will be delivered incl. mounting material Earthing cables (set) Earthing cables are used for grounding doors and panels. Material Colour Part. no. Copper Yellow/green MLR4401 What s in the box: 4 earthing cables 200 mm incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

88 2 Cover plate Plate to cover up the bottom or top of the cabinet. The cover plate can be mounted in the base plate or roof. Description Technical data Part. no. Cover plate RAL x 427 mm MBM1001B What s in the box: 1 cover plate incl. mounting material Corner guide rail The corner guide rail supports your network equipment. 86 Depth mm Material Finishing Part. no. 300 Sheet metal Galvanised MLR4101 What s in the box: Set of 2 corner guide rails, incl. mounting material

89 CATALOGUE 2014 Housings - Wall enclosures (VARICON) MWE Duopac Tripac Housings - Wall enclosures (VARICON)

90 3 MWE MWE enclosure The basic frame is built-up of a wall-mounting plate with integrated cable strain, four depth profiles, two cable-entry plates (base and top) and a set of 19-inch profiles. The assembly consists of two equal top and base panels with ventilation slots to the rear, two equal side panels and a safety glass door with a EK-333 cylinder lock with grip. Colour: RAL 7047 Description: Finishing: Maximum weight: Glass door Powder coated 100 kg Unit Height Width Depth Weight 88 U mm mm mm Construction depth kg Part. no MWE06425G MWE06525G MWE09525G MWE09625G MWE12525G MWE12625G MWE15525G MWE15625G MWE21625G What s in the box: 1 back panel, 4 depth posts, 2 cable entry plates, 2 19 profiles, 2 top and bottom plates, 2 side panels, 1 glass door and 1 assembly set

91 Housings - Wall enclosures (VARICON) Ventilated metal doors The ventilated metal door ensures that the MWE enclosure is visually partitioned off. The door should be earthed using the earth cable supplied. Width: 600 mm Material: Finishing: Sheet metal Powder coated Colour: RAL 7047 Width Unit U 600 mm Part. no. 6 MWEMD06 9 MWEMD09 12 MWEMD12 15 MWEMD15 21 MWEMD21 89 What s in the box: 1 sheet metal door, 1 earthing cable, incl. mounting material Glazed doors Glass panel door with clear glass for the MWE enclosure. Width: 600 mm Unit U Part. no. 6 MWEGD06 9 MWEGD09 12 MWEGD12 15 MWEGD15 21 MWEGD21 What s in the box: 1 glazed door incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

92 3 Top plate with fan unit A fan unit can replace the blank plates in the top of the enclosure to assist cooling. Depth mm Part. no. 425 MWEFP425 MWEFP-425-UK 525 MWEFP525 MWEFP-525-UK 625 MWEFP625 MWEFP-625-UK What s in the box: 1 plate with 2 fan-units, incl. mounting material inch profiles Profiles are used for the assembly of 19-inch components. They are adjustable in depth per 50 mm. It is possible to adjust the entire 19-inch compartment in depth without moving the equipment. Profiles are provided with a pitch of ½ U, to assemble accessories at the side. Material: Sheet metal Finishing: Galvanised Unit U Description Part. no. 6 Flat profiles MWEPR06 9 Flat profiles MWEPR09 12 Flat profiles MWEPR12 15 Flat profiles MWEPR15 21 Flat profiles MWEPR21 What s in the box: 2 profiles incl. mounting material

93 Housings - Wall enclosures (VARICON) Shunting eye The shunting eye for front mounting vertical 35 x 64 mm (w x d) is used for cable management and can be mounted on 19-inch profiles. Width: 35 mm Depth: 64 mm Description vertical - 1 piece Part. no. MCM0001 What s in the box: 1 shunting eye incl. mounting material Shunting eye The shunting eye for front mounting 1HE 30 x 86 mm (w x d) is used for cable management and can be mounted on 19-inch profiles. Width: 30 mm Depth: 86 mm 91 Description Part. no. 1 U - 1 piece MCM0002 What s in the box: 1 shunting eye incl. mounting material Shunting comb with 4 teeth The shunting comb allows easy routing of cables. Material: Sheet metal Finishing: Powder coated Description Colour Part. no. with 4 metal rings, 2 x 1/2 HE RAL 7047 MCM0011 with 4 metal rings, 2 x 1/2 HE RAL 9011 MCM0011B What s in the box: 1 shunting comb incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

94 3 Cable entry brush For dust-free separate cable entry, instead of cable entry plates at the bottom and/or top. Suitable for the MWE enclosure. Description Material Part. no. Entry opening 360 mm Nylon MWECB01 What s in the box: 1 cable entry brush incl. mounting material Shelves 92 Several perforated shelves are available for safe equipment installation. The shelves are attached to the 19-inch profiles. The cantilever types will be mounted to the front (standard) profiles only. The variable and the telescopic shelves have to be attached to the rear side on 19-inch profiles. An additional set of 19-inch profiles are required for the variable and the telescopic shelves. Material: Sheet metal Finishing: Powder coated Colour: RAL 7047 Depth Construction space Maximum weight mm Construction depth mm kg Description Part. no Half floating 2 U MPL Variable MPL Half floating 2 U MPL Variable MPL0011 What s in the box: 1 shelve incl. mounting material

95 Housings - Wall enclosures (VARICON) Corner guide rails The corner guide rail (set of 2) supports heavy 19-inch equipment. They are assembled at the side of the 19-inch profiles, and take up no rack space. Material: Sheet metal Colour: Sendzimir Unit Maximum weight U kg Description Part. no Corner guide rail MWECS01 What s in the box: 1 corner guide rail left, 1 corner guide rail right, incl. mounting material 93 Thermostat The thermostat can be used together with the following fans: Triple fan unit MCS1004(B) Double fan unit TRI.VE MWE roof panel with built-in double fan unit MWEFP425, MWEFP525 and MWEFP625 The thermostat ensures that the fan is turned on at the temperature setting you select. Description Thermostate Thermostat Part. no. MWETF01 MWETF02 What s in the box: 1 thermostat, cable included Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

96 3 Power strip A compact power socket of top quality. Available in both SCHUKO and UTE. Delivered including mounting material, for easy assembling against the back wall of your MWE. Cable length is 1,5 metre. UK versions available upon request. Outlets Input connector Rack position Technical details Part. no. SCHUKO (6) SCHUKO 19-inch (1U) MWEPS01 UTE (6) UTE 19-inch (1U) MWEPS02 MWEPS10 94 What s in the box: 1 power socket, 2 mounting brackets, incl. mounting material Mounting material The screws are designed for the use in your MWE wall enclosure. The kit quantity is for one enclosure. The plastic click fasteners can be used to assemble a power strip against the rear side. For this you need four fasteners. Caged nuts for mounting applications. They can be mounted in the holes in the front and back of the 19-inch profiles. Material Description Part. no. Plastic Click fasteners for power strip mounting MWETN01 Plastic Decorative screws with washer (black) M5 - (20 pieces) MFM0010 Plastic Decorative screws with washer (black) M6 - (20 pieces) MFM0012 Steel Plate screws - (22 pieces) MWEXS01 Steel Cage nuts M5 - (20 pieces) MFM0001 Steel Cage nuts M6 - (20 pieces) MFM0003

97 Housings - Wall enclosures (VARICON) Duopac Duopac enclosure The Duopac is built with one set of 19-inch profiles, mounted in the front part of the enclosure. The enclosure has rubber-damping feet to provide stabile and scratch-free standing. The top is ventilated. The quick fit snap locking on the side panels allows easy removal and fitting. Mounting material for wall fastening is not included. Colour: RAL 7047 Description: Finishing: Door with grey tinted safety glass Powder coated Unit Height Width Depth Weight U mm mm mm kg Part. no DUO DUO DUO What s in the box: complete mounted enclosure with 2 keys Adjustable base legs Adjustable base legs for uneven surfaces. Material: Plastic Height mm Maximum weight (kg) Pieces Part. no kg 4 MSM1001 What s in the box: 4 adjustable base legs, incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

98 3 19-inch profiles Extra profiles can be ordered, among other things for the installation of a server or a shelf. One set consists of two profiles. Material: Sheet metal Unit U Description Part. no. 3 Flat profiles DUO.PR Flat profiles DUO.PR Flat profiles DUO.PR What s in the box: 2 profiles incl. mounting material Shelves 96 Several perforated shelves are available for safe equipment installation. The shelves are attached to the 19-inch profiles. The cantilever types will be mounted to the front (standard) profiles only. The variable shelves are attached to the rear side on 19-inch profiles as well. An extra set of 19-inch profiles are required for the variable shelves. Material: Sheet metal Finishing: Powder coated Colour: RAL 7047 Depth Construction space Maximum weight mm Construction depth mm kg Description Part. no Half floating 2 U MPL Variable MPL Half floating 2 U MPL Variable MPL0011 What s in the box: 1 shelve incl. mounting materials

99 Housings - Wall enclosures (VARICON) Tripac Tripac wall enclosure The Tripac is approved to IP Sealing Specification. The Tripac is provided with a set of 19-inch profiles, and two mounting profiles on the wall mounting plate. The cable can enter from either the top or bottom of the enclosure. A cylinder lock secures the front door. Inside the centre segment the lock can be opened. Colour: RAL 7047 Finishing: Description: Powder coated Glass door grey tinted Unit Height Width Depth Weight U mm mm mm kg Part. no TRI TRI TRI What s in the box: complete mounted enclosure with 2 keys EK inch profiles Extra profiles can be ordered, among other things for the installation of a server or a shelf. One set consists of two profiles. Material: Sheet metal Unit U Description Part. no. 9 Flat profiles TRI.PR Flat profiles TRI.PR Flat profiles TRI.PR Flat profiles TRI.PR What s in the box: 2 profiles incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

100 3 Shelves Several perforated shelves are available for safe equipment installation. The shelves are attached to the 19-inch profiles. The cantilever types will be mounted at the front (standard) profiles only. The variable shelves have to be attached at the rear side on 19-inch profiles as well. An additional set of 19-inch profiles are required for the variable shelves. Material: Sheet metal Finishing: Powder coated Colour: RAL 7047 Depth Construction space Maximum weight mm Construction depth mm kg Description Part. no Half floating 2 U MPL Variable MPL Half floating 2 U MPL Variable MPL Variable telescopic MPL0111 What s in the box: 1 shelve incl. mounting material Insert module It is possible to use the following insert modules in your Duopac or Tripac enclosure. Please note if modules are used, the enclosure will not conform to IP Sealing Specification. Description Technical data Part. no. Cable entry brushes (set) Max. entry opening 360 x 50 mm TRI.KA Ventilation plate TRI.VP What s in the box: single pieces incl. mounting material

101 Housings - Wall enclosures (VARICON) Fan unit This fan unit can be mounted in your Tripac wall enclosure. Optional, with the thermostat MWETF01 you can switch this fan unit automatically. Description Technical data Part. no. Fan unit 230VAC / 50 Hz - 110mA - 23 db - 12 Watt TRI.VE What s in the box: 1 fan unit incl. mounting material 99 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

102 100 3

103 CATALOGUE 2014 Cooling (VARICONDITION) Cooling solutions Cooling (VARICONDITION)

104 4 Cooling solutions 102

105 Cooling (VARICONDITION) 103 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

106 104 4

107 CATALOGUE 2014 Monitoring (VARICONTROL) VariControl-L: Rack Access Control VariControl-S: Environmental Monitoring System VariControl-C Power Monitoring VariControl Energy Monitoring Monitoring (VARICONTROL)

108 5 VariControl-L: Rack Access Control 106

109 Monitoring (VARICONTROL) VariControl-L: Rack Access Control VARICONTROL-L BASIC To be integrated with: Building surveillance systems Security systems Basic handles can be managed by an external port VARICONTROL-L HID-DIRECT Each handle is given an IP address Each handle is connected directly to the Ethernet Network. Easy cabling High security: few components and connections Suitable for multiple rows of cabinets and insulated cabinets throughout the building Simple installation VARICONTROL-L HID-485 Only the gateway is given an IP address, the handles are identified by an ID code on a RS-485 bus Up to 32 handles per gateway The BUS cables run between cabinets Very cost-efficient if the cabinets are placed in a central area Easy installation 107 VariControl-L VariControl-L VariControl-L Basic HID-Direct HID-485 Door Single door Single door 12U / 16U / Co-Location cabinets 4 sections 21U / 25U / Co-Location cabinets 2 sections MEL4001 MEL4101 MEL4201 MEL4002 MEL4102 MEL4202 Single door 37U / 41U / 46U / 50U MEL4003 MEL4103 MEL4203 Double door 41U MEL4004 MEL4104 MEL4204 Double door 46U MEL4005 MEL4105 MEL4205 Double door 50U MEL4006 MEL4106 MEL4206 What s in the box: power supply (C14), internal cabling incl. mounting material. Excl. inter rack cabling. Delivery time to be advised Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

110 5 VariControl-L accessories Minkels supplies the Varicontrol-L HID rack access control with the Varicontrol-L HID Admin Suite, a software solution to manage the administration of intelligent Varicontrol-L HID rack security solutions. The software solution is installed on a central server and can communicate with all locks and equipment over the network. Users, the authorisation policy, handles, HID cards and peripheral equipment can be configured and managed via the software solution from a central location. Delivery time to be advised 108 Description VariControl-L Administration Suite management software VariControl-L Desktop Reader with IP-port VariControl-L HID proximity card VariControl-L Battery pack for external power of the HID swivel handle (EU) VariControl-L Battery pack for external power of the HID swivel handle (UK) VariControl-S magnetic door switch VariControl-L HID-485, Gateway VariControl-L HID-485, Gateway configuration cable VariControl-L HID, configurations cable - serial Part. no. MEL0120 MEL0121 MEL0115 MEL0118 MEL0119 MRM0128 MEL0122 MEL0114 MEL0111

111 Monitoring (VARICONTROL) VariControl-S: Environmental Monitoring System 109 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

112 5 Position Standard Pro Sensor Autosense yes yes Sensor Notification Wizard no yes alerts yes yes SNMP version 1 yes yes SNMP Version 2c and 3 no yes SNMP Traps yes yes VariControl-S Specifications 110 SMS alerts yes (i.c.w. an external to third party SMS gateway) HTTPS (SSL) no yes Skype call alerts no yes yes (i..c.w. GSM modem) Telephone alerts no yes (i.c.w. GSM modem) Keep alive yes yes Keep alive trap yes yes Network Time Protocol (NTP) yes yes Photo Log no yes Audio log no yes Floor plans no yes Password security yes yes Guest login no yes Advanced log filter no yes Modbus no yes Multilanguage web interface no yes Specific Pro sensors Standard Pro Daisy chain temperature sensor no yes Extension controllers no yes USB GPRS modem no yes Universal USB camera no yes Pan/Tilt USB camera dome no yes 8 ports dry contact sensor no yes Virtual sensors no yes (80)

113 Monitoring (VARICONTROL) Controllers Various controllers are available depending on the number of measuring points and type of sensors required. Additionally, the Pro version offers an even higher management function for increased control of your IT surroundings. Dry- Sensor contact Camera Extension Description Pro ports ports ports ports Part. no. VariControl-S controller with 2 sensor ports (incl. 1 temperature sensor) VariControl-S controller with 4 sensor ports VariControl-S controller with 8 sensor ports VariControl-S Pro controller with 8 sensor ports and 2 extension ports VariControl-S Pro controller with 8 sensor ports, 4 USB camera ports and 2 extension ports VariControl-S controller with 8 sensor ports and 20 dry contact ports VariControl-S Pro controller with 8 sensor ports, 20 dry contact ports and 2 extension ports VariControl-S controller with 8 sensor ports and 60 dry contact ports VariControl-S Pro controller with 8 sensor ports, 60 dry contact ports and 2 extension ports VariControl-S extension controller with 16 dry contact ports - The extension controller only works when used with a controller with extension ports VariControl-S extension controller with 8 sensor ports - only works when used with a controller with extension ports GPRS modemfor text message alerts (only with Pro controller) 2 ¹ MRM ¹ MRM ¹ MRM0010 yes 8 ² 2 MRM0010LS yes 8 ² 4 2 MRM0011L 8 20 MRM0020 yes MRM0020LS 8 60 MRM0030 yes MRM0030LS 16 MRM ¹ MRM0041 ¹ MRM ¹ Dry contacts available through sensor port adapter (MRM0132) ² Dry contacts available through 8 port dry contact sensor (MRM0124) What s in the box: incl. mounting material. Delivery time to be advised Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

114 5 Environmental sensors Environmental sensors measure the environment of the IT equipment and are connected to the VariControl-S controllers. 112 Description VariControl-S temperature sensor with a fixed cable (1 m) VariControl-S temperature sensor with a fixed cable (2.5 m) VariControl-S temperature sensor VariControl-S temperature sensor (daisy chain to a maximum of 8 sensors) - only works when used with a pro controller VariControl-S humidity and temperature sensor VariControl-S air flow sensor Part. no. MRM0101 MRM0102 MRM0118 MRM0122 MRM0117 MRM0109 What s in the box: incl. mounting material. Delivery time to be advised

115 Monitoring (VARICONTROL) Security sensors The security sensors monitor access to the data centre or the alarm status of the equipment. Description VariControl-S dry-contact sensor (adaptor) VariControl-S dry contact sensor with 8 ports (only in combination with the Pro controller) VariControl-S magnetic door switch VariControl-S motion detector VariControl-S smoke alarm VariControl-S siren & flashing light VariControl-S universal camera (USB) VariControl-S dome camera with pan/tilt controls (USB) VariControl-S water leak detector with a fixed cable (4.5 m) VariControl-S water leak detector with a fixed cable (33 m) VariControl-S water leak detection loop (3.3 m) VariControl-S water leak detection loop extension (3.3 m). Part. no. MRM0132 MRM0124 MRM0128 MRM0110 MRM0111 MRM0119 MRM0130 MRM0131 MRM0105 MRM0125 MRM0127 MRM What s in the box: incl. mounting material. Delivery time to be advised Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

116 5 Other sensors These sensors can be used for various applications, such as for turning fan units on and off, or for integrating external sensors. Description VariControl-S AC volt detector VariControl-S sensor controlled relay VariControl-S 4-20mA signal converter Part. no. MRM0112 MRM0114 MRM What s in the box: incl. mounting material. Delivery time to be advised

117 Monitoring (VARICONTROL) VariControl-C Power Monitoring 115 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

118 5 VariControl Energy Monitoring 116

119 Monitoring (VARICONTROL) 117 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

120 118 5

121 Power distribution (VARICONPOWER) VariconPower PDU - Basic Rack PDU VariconPower PDU - Metered Rack PDU VariconPower PDU - Monitored (Remote) and Monitored & Switched Rack PDU VariconPower UPS CATALOGUE 2014 Power distribution (VARICONPOWER)

122 6 VariconPower PDU - Basic Rack PDU 120

123 Power distribution (VARICONPOWER) Aluminium power strips SCHUKO - 1 Phase, up to 16A The power strips (SCHUKO), input and output connector, are made of aluminum. English versions available upon request. The power strips are approved for 16 ampere. Outlets Input connector Rack position Technical details Part. no. SCHUKO (4) SCHUKO/UTE Vertical MPS0001 SCHUKO (8) SCHUKO/UTE 19-inch (1U) Switch MPS0401 SCHUKO (9) SCHUKO/UTE 19-inch (1U) and vertical MPS0402 SCHUKO (12) SCHUKO/UTE Vertical Excess-volt protection MPS0203 SCHUKO (13) SCHUKO/UTE Vertical MPS0004 SCHUKO (19) SCHUKO/UTE Vertical MPS What s in the box: 1 power strip, 2 mounting sets, cable length 3m (SCHUKO/UTE) Aluminium power strips UTE - 1 Phase, up to 16A The power strips (UTE), input and output connector, are made of aluminum. The power strips are approved for 16 ampere. Outlets Input connector Rack position Technical details Part. no. UTE (4) SCHUKO/UTE Vertical MPS1001 UTE (9) SCHUKO/UTE 19-inch (1U) and vertical MPS1402 UTE (12) SCHUKO/UTE Vertical Excess-volt protection MPS1203 UTE (13) SCHUKO/UTE Vertical MPS1004 UTE (19) SCHUKO/UTE Vertical MPS1005 What s in the box: 1 power strip, 2 mounting sets, cable length 3m (SCHUKO/UTE) Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

124 6 Power strips aluminium IEC Phase, up to 16A The IEC-320 power strip has C13 output connectors (optional 10 ampere fused). 3 Meter cable length with C14 or CEE form (230V-16A) connector is included. Outlets Input connector Rack position Technical details Part. no. C13 (8) C14 19-inch (1U) and vertical 1x fine fuse (max. 10A) MPS5004 C13 (12) CEE 19-inch (1U) and vertical MPS5014 C13 (12) C14 Vertical 1x fine fuse (max. 10A) MPS5002 C13 (16) C14 Vertical 1x fine fuse (max. 10A) MPS C13 (18) CEE Vertical MPS5013 C13 (18), C19 (4) CEE Vertical MPS5015 What s in the box: 1 power strip, 2 mounting sets, cable length 3m. Power strips aluminium BS Phase, up to 13A The power strips are made of aluminium and meet the BS 1363 specifications. The power strips are approved for 13 ampere. Outlets Input connector Rack position Part. no. BS 1363 (7) BS inch (1U) MPS4003 BS 1363 (13) BS 1363 Vertical MPS4001 What s in the box: 1 power strip, 2 mounting sets, cable length 3m

125 Power distribution (VARICONPOWER) Power strips aluminium - 1 Phase, up to 32A The compact aluminium IEC-320 power strips are fitted with C13 and C19 output connectors and are supplied with a 3-metre cable with a CEE single-phase 32 amp connector. The power strips are available in different versions. Outlets Input connector Rack position Technical details Part. no. C13 (18) CEE Vertical 2x MCB (16A per branch) MPS7001 C13 (24) CEE Vertical 2x MCB (16A per branch) MPS7003 C13 (20), C19 (4) CEE Vertical 2x MCB (16A per branch) MPS7004 What s in the box: 1 power strip, 2 mounting sets, cable length 3m. 123 Power strips aluminium - 3 Phase, up to 16A The compact aluminium IEC-320 power strips are fitted with C13 and C19 output connectors and are supplied with a 3-metre cable with a CEE three-phase 16 amp connector. The power strips are available in different versions. Outlets Input connector Rack position Part. no. C13 (18), C19 (6) CEE Vertical MPS8001 C13 (12) CEE Vertical MPS8002 What s in the box: 1 power strip, 2 mounting sets, cable length 3m. Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

126 6 Power strips aluminium - 3 Phase, up to 32A The compact aluminium IEC-320 power strips are fitted with C13 and C19 output connectors and are supplied with a 3-metre cable with a CEE three-phase 32 amp connector. The power strips are available in different versions. Outlets Input connector Rack position Technical details Part. no. C13 (24), C19 (6) CEE Vertical 6x MCB (2 per phase, 16A per branch) MPS9002 What s in the box: 1 power strip, 2 mounting sets, cable length 3m. 124 Mounting set for aluminium power strip Mounting set for vertical installation of the power strip on the 19-inch profiles. Description Mounting set for mounting one aluminium power strip. Mounting set for mounting two aluminium power strips next to each other. Part. no. MPS0097 MPS0099 What s in the box: 1 mounting set incl. mounting material Mounting set for aluminium power strip These mounting sets are developed to mount power strips in situations where there is minimum space available. With the MPS0095 it is possible to mount 1 power strip and with the MPS0096 it is possible to mount 2 power strips behind the height posts of the bayed cabinet. Description Mounting set for 1 aluminium power strip Mounting set for 2 aluminium power strips Part. no. MPS0095 MPS0096 What s in the box: 1 mounting set consists of 2 brackets to mount the power strip incl. mounting material

127 Power distribution (VARICONPOWER) Plastic power strips SCHUKO The power strips (SCHUKO), input and output connector, are made of synthetic material. The power strips are approved for 16 ampere. Outlets Input connector Rack position Technical details Part. no. SCHUKO (6) SCHUKO Vertical Excess-volt protection MPS2202 SCHUKO (6) SCHUKO 19-inch (1U) and vertical MPS2301 SCHUKO (9) SCHUKO Vertical MPS2003 SCHUKO (12) SCHUKO Vertical MPS2004 What s in the box: 1 power strip, cable length 3m (SCHUKO/UTE), 2 mounting sets MPS0098, incl. mounting material 125 Plastic power strips UTE The power strips (UTE), input and output connector, are made of synthetic material. The power strips are approved for 16 ampere. Outlets Input connector Rack position Technical details Part. no. UTE (6) UTE 19-inch (1U) MPS3301 UTE (9) UTE Vertical MPS3003 UTE (12) UTE Vertical MPS3004 What s in the box: 1 power strip, cable length 3m (SCHUKO/UTE), 2 mounting sets MPS0098, incl. mounting material Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

128 6 Mounting set for plastic power sockets The mounting set enables you to mount the plastic power strip to the height post at any interval. Description Mounting set to mount one plastic power strip Part. no. MPS0098 What s in the box: 2 brackets incl. mounting material 126

129 Power distribution (VARICONPOWER) VariconPower PDU - Metered Rack PDU Metered Rack PDU The Metered PDU is a product version that has all the options of a Basic PDU. On top of that it has a display built in, with which it is possible to read out live the inlet current of a server rack. This product version doesn t have the full range of intelligent functionalities. For example, a Metered PDU will provide a snapshot and not an overview over time. Also, it is not possible with this version to have remote access and proactively manage the PDU. Metered PDU s however could be part of a first step in the creation of (energy) efficiency awareness within an organization and the need for an energy efficient server room design. As with the other product versions customization is always an option. Rack 127 Outlets Input connector position Technical details Part. no. C13 (18), C19 (4) CEE Vertical Single-phase, 16 amp - Ampère meter MPS5115 C13 (20), C19 (4) CEE Vertical Single-phase, 32 amp - 2x MCB (16A per branch), Ampère meter MPS7104 C13 (18), C19 (6) CEE Vertical Three-phase, 16 amp - Ampère meter MPS8101 C13 (24), C19 (6) CEE Vertical Three-phase, 32 amp - 6x MCB (2 per phase, 16A per branch), Ampère meter - limited to 46U and higher racks MPS9102 What s in the box: 1 power strip, 2 mounting sets, cable length 3m. Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

130 6 VariconPower PDU - Monitored (Remote) and Monitored & Switched Rack PDU 128

131 Power distribution (VARICONPOWER) VariconPower UPS 129 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

132 130 6

133 CATALOGUE 2014 Index Index

134 A Description Article no. Page Accessory package copper basic, 1300 mm/25u/45me: 4 shunting couplings VMA Accessory package copper basic, 2000 mm/41u/73me: 6 shunting couplings VMA Accessory package copper basic, 2200 mm/46u/81me: 6 shunting couplings VMA Accessory package copper plus, 1300 mm/25u/45me, 8 shunting couplings VMA Accessory package copper plus, 1300 mm/25u/45me: 8 shunting couplings VMA Accessory package copper plus, 1300 mm/25u/45me: 8 shunting couplings VMA Accessory package copper plus, 2000 mm/41u/73me: 12 shunting couplings VMA Accessory package copper plus, 2000 mm/41u/73me: 12 shunting couplings VMA Accessory package copper plus, 2000 mm/41u/73me: 12 shunting couplings VMA Accessory package copper plus, 2200 mm/46u/81me: 12 shunting couplings VMA Accessory package copper plus, 2200 mm/46u/81me: 12 shunting couplings VMA Accessory package copper plus, 2200 mm/46u/81me: 12 shunting couplings VMA Accessory package fiber basic, 1300 mm/25u/45me: 2 cable guide profiles VMA Accessory package fiber basic, 2000 mm/41u/73me: 2 cable guide profiles VMA Accessory package fiber basic, 2200 mm/46u/81me: 2 cable guide profiles VMA Accessory package fiber plus, 1300 mm/25u/45me: 2 cable guide profiles VMA Accessory package fiber plus, 1300 mm/25u/45me: 2 cable guide profiles VMA Accessory package fiber plus, 1300 mm/25u/45me: 2 cable guide profiles VMA Accessory package fiber plus, 2000 mm/41u/73me: 2 cable guide profiles VMA Accessory package fiber plus, 2000 mm/41u/73me: 2 cable guide profiles VMA Accessory package fiber plus, 2000 mm/41u/73me: 2 cable guide profiles VMA Accessory package fiber plus, 2200 mm/46u/81me: 2 cable guide profiles VMA Accessory package fiber plus, 2200 mm/46u/81me: 2 cable guide profiles VMA Accessory package fiber plus, 2200 mm/46u/81me: 2 cable guide profiles VMA Airflow optimization package Basic, for 41U/2000 mm x 600 mm cabinets RAL 7047 MCS Airflow optimization package Basic, for 41U/2000 mm x 600 mm cabinets RAL 9011 MCS0906B 54 Airflow optimization package Basic, for 41U/2000 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Basic, for 41U/2000 mm x 800 mm cabinets RAL 9011 MCS0916B 54 Airflow optimization package Basic, for 46U/2200 mm x 600 mm cabinets RAL 7047 MCS Airflow optimization package Basic, for 46U/2200 mm x 600 mm cabinets RAL 9011 MCS0907B 54 Airflow optimization package Basic, for 46U/2200 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Basic, for 46U/2200 mm x 800 mm cabinets RAL 9011 MCS0917B 54 Airflow optimization package Basic, for 50U/2400 mm x 600 mm cabinets RAL 7047 MCS Airflow optimization package Basic, for 50U/2400 mm x 600 mm cabinets RAL 9011 MCS0908B 54 Airflow optimization package Basic, for 50U/2400 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Basic, for 50U/2400 mm x 800 mm cabinets RAL 9011 MCS0918B 54 Airflow optimization package Plus, for 41U/2000 mm x 600 mm cabinets RAL 7047 MCS Airflow optimization package Plus, for 41U/2000 mm x 600 mm cabinets RAL 9011 MCS0946B 54 Airflow optimization package Plus, for 41U/2000 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Plus, for 41U/2000 mm x 800 mm cabinets RAL 9011 MCS0956B 54 Airflow optimization package Plus, for 46U/2200 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Plus, for 46U/2200 mm x 800 mm cabinets RAL 9011 MCS0957B 54 Airflow optimization package Plus, for 50U/2400 mm x 600 mm cabinets RAL 7047 MCS Airflow optimization package Plus, for 50U/2400 mm x 600 mm cabinets RAL 9011 MCS0948B 54 Airflow optimization package Plus, for 50U/2400 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Plus, for 50U/2400 mm x 800 mm cabinets RAL 9011 MCS0958B 54 Airflow optimization package Standard, for 41U/2000 mm x 600 mm cabinets RAL 7047 MCS Airflow optimization package Standard, for 41U/2000 mm x 600 mm cabinets RAL 9011 MCS0926B 54 Airflow optimization package Standard, for 41U/2000 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Standard, for 41U/2000 mm x 800 mm cabinets RAL 9011 MCS0936B 54 Airflow optimization package Standard, for 46U/2200 mm x 600 mm cabinets RAL 7047 MCS Airflow optimization package Standard, for 46U/2200 mm x 600 mm cabinets RAL 9011 MCS0927B 54 Airflow optimization package Standard, for 46U/2200 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Standard, for 46U/2200 mm x 800 mm cabinets RAL 9011 MCS0937B 54 Airflow optimization package Standard, for 50U/2400 mm x 600 mm cabinets RAL 7047 MCS Airflow optimization package Standard, for 50U/2400 mm x 600 mm cabinets RAL 9011 MCS0928B 54 Airflow optimization package Standard, for 50U/2400 mm x 800 mm cabinets RAL 7047 MCS Airflow optimization package Standard, for 50U/2400 mm x 800 mm cabinets RAL 9011 MCS0938B 54 B Base legs 25 mm 1500 kg, adjustable, set of 2 pieces MSM Base legs, adjustable, set of 4 MSM , 95

135 Index Description Article no. Page Base legs, extended, set of mm (h) MSM Base plate middle blank mm (d) RAL 7047 MBM Base plate middle blank mm (d) RAL 7047 MBM Base plate middle blank mm (d) RAL 7047 MBM Base plate middle blank mm (d) RAL 7047 MBM Base plate middle blank mm (d) RAL 7047 MBM Base plate middle with 3 cut-outs mm (d) RAL 7047 MBM Base plate middle with 3 cut-outs mm (d) RAL 9011 MBM0103B 19 Base plate middle with 3 cut-outs mm (d) RAL 7047 MBM Base plate middle with 3 cut-outs mm (d) RAL 9011 MBM0104B 19 Base plate middle with 3 cut-outs mm (d) RAL 7047 MBM Base plate middle with 3 cut-outs mm (d) RAL 7047 MBM Base plate middle with 3 cut-outs mm (d) RAL 9011 MBM0101B 19 Base plate middle with 3 cut-outs mm (d) RAL 7047 MBM Baying kit MLR external, LANRack-LANRack baying MLR Baying kit MLR external, LANRack-Varicon-M baying MLR Baying kit MLR external, open frame-open frame baying MLR Baying set RAL 7047 MFM Baying set RAL 9011 MFM , 69 Baying set external RAL 7047 MFM Baying set external RAL 9011 MFM , 69 Baying set internal MFM , 69 Blank part for base plate mm (d) RAL 7047 MBM Blank part for base plate mm (d) RAL 9011 MBM0123B 20 Blank part for base plate mm (d) RAL 7047 MBM Blank part for base plate mm (d) RAL 9011 MBM0124B 20 Blank part for base plate mm (d) RAL 7047 MBM Blank part for base plate mm (d) RAL 7047 MBM Blank part for base plate mm (d) RAL 9011 MBM0121B 20 Blank part for base plate mm (d) RAL 9011 MFE0003B 64 Blank part for base plate mm (d) RAL 7047 MBM Broad cable duct (600 mm) with partition for 600 mm wide cabinet, RAL 7047 MCM Broad cable duct (600 mm) with partition for 600 mm wide cabinet, RAL 9011 MCM0302B 40 Broad cable duct (600 mm) with partition for 800 mm wide cabinet, RAL 7047 MCM Broad cable duct (600 mm) with partition for 800 mm wide cabinet, RAL 9011 MCM0303B 40 Broad cable duct (600 mm) with partition for VariCondition H2O/DX, RAL 7047 MCM Broad cable duct (600 mm) with partition for VariCondition H2O/DX, RAL 9011 MCM0317B 42 Brushes for base plate mm (d) MBM Brushes for base plate mm (d) MBM Brushes for base plate mm (d) MBM Brushes for base plate mm (d) MBM Brushes for base plate mm (d) MBM C Cabinet, co-location 2 sect x 1000 x 2200 mm/46u (w x d x h) RAL 7047 MCL Cabinet, co-location 2 sect x 1000 x 2200 mm/46u (w x d x h) RAL 9011 MCL Cabinet, co-location 2 sect x 1200 x 2200 mm/46u (w x d x h) RAL 7047 MCL Cabinet, co-location 2 sect x 1200 x 2200 mm/46u (w x d x h) RAL 9011 MCL Cabinet, co-location 2 sect x 1000 x 2200 mm/46u (w x d x h) RAL 7047 MCL Cabinet, co-location 2 sect x 1000 x 2200 mm/46u (w x d x h) RAL 9011 MCL Cabinet, co-location 2 sect x 1200 x 2200 mm/46u (w x d x h) RAL 7047 MCL Cabinet, co-location 2 sect x 1200 x 2200 mm/46u (w x d x h) RAL 9011 MCL Cabinet, co-location 4 sect x 1000 x 2200 mm/46u (w x d x h) RAL 7047 MCL Cabinet, co-location 4 sect x 1000 x 2200 mm/46u (w x d x h) RAL 9011 MCL Cabinet, co-location 4 sect x 1200 x 2200 mm/46u (w x d x h) RAL 7047 MCL Cabinet, co-location 4 sect x 1200 x 2200 mm/46u (w x d x h) RAL 9011 MCL Cabinet, co-location 4 sect x 1000 x 2200 mm/46u (w x d x h) RAL 7047 MCL Cabinet, co-location 4 sect x 1000 x 2200 mm/46u (w x d x h) RAL 9011 MCL Cabinet, co-location 4 sect x 1200 x 2200 mm/46u (w x d x h) RAL 7047 MCL Cabinet, co-location 4 sect x 1200 x 2200 mm/46u (w x d x h) RAL 9011 MCL Cabinet, server, pre-ass x 1000 x 2000 mm/41u (w x d x h) RAL 7047 VME206010C 4 Cabinet, server, pre-ass x 1000 x 2000 mm/41u (w x d x h) RAL 7047 VME206010S 4 Cabinet, server, pre-ass x 1000 x 2000 mm/41u (w x d x h) RAL 9011 VME206010CB 4 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

136 Description Article no. Page Cabinet, server, pre-ass x 1000 x 2000 mm/41u (w x d x h) RAL 9011 VME206010SB 4 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 7047 VME226010C 4 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 7047 VME226010S 4 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 9011 VME226010CB 4 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 9011 VME226010SB 4 Cabinet, server, pre-ass x 1000 x 2400 mm/50u (w x d x h) RAL 7047 VME246010C 4 Cabinet, server, pre-ass x 1000 x 2400 mm/50u (w x d x h) RAL 7047 VME246010S 4 Cabinet, server, pre-ass x 1000 x 2400 mm/50u (w x d x h) RAL 9011 VME246010CB 4 Cabinet, server, pre-ass x 1000 x 2400 mm/50u (w x d x h) RAL 9011 VME246010SB 4 Cabinet, server, pre-ass x 1000 x 1300 mm/25u (w x d x h) RAL 7047 VME138010S 5 Cabinet, server, pre-ass x 1000 x 1300 mm/25u (w x d x h) RAL 7047 VME138080S 5 Cabinet, server, pre-ass x 1000 x 1300 mm/25u (w x d x h) RAL 9011 VME138010SB 5 Cabinet, server, pre-ass x 1000 x 2000 mm/41u (w x d x h) RAL 7047 VME208010C 5 Cabinet, server, pre-ass x 1000 x 2000 mm/41u (w x d x h) RAL 7047 VME208010S 5 Cabinet, server, pre-ass x 1000 x 2000 mm/41u (w x d x h) RAL 9011 VME208010CB 5 Cabinet, server, pre-ass x 1000 x 2000 mm/41u (w x d x h) RAL 9011 VME208010SB 5 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 7047 VME228010C 5 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 7047 VME228010S 5 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 7047 VME248010C 5 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 9011 VME228010CB 5 Cabinet, server, pre-ass x 1000 x 2200 mm/46u (w x d x h) RAL 9011 VME228010SB 5 Cabinet, server, pre-ass x 1000 x 2400 mm/50u (w x d x h) RAL 7047 VME248010S 5 Cabinet, server, pre-ass x 1000 x 2400 mm/50u (w x d x h) RAL 9011 VME248010CB 5 Cabinet, server, pre-ass x 1000 x 2400 mm/50u (w x d x h) RAL 9011 VME248010SB 5 Cabinet, server, pre-ass x 1200 x 2000 mm/41u (w x d x h) RAL 7047 VME208012S 5 Cabinet, server, pre-ass x 1200 x 2000 mm/41u (w x d x h) RAL 9011 VME208012CB 5 Cabinet, server, pre-ass x 1200 x 2000 mm/41u (w x d x h) RAL 9011 VME208012SB 5 Cabinet, server, pre-ass x 1200 x 2200 mm/46u (w x d x h) RAL 7047 VME228012C 5 Cabinet, server, pre-ass x 1200 x 2200 mm/46u (w x d x h) RAL 7047 VME228012S 5 Cabinet, server, pre-ass x 1200 x 2200 mm/46u (w x d x h) RAL 9011 VME228012CB 5 Cabinet, server, pre-ass x 1200 x 2200 mm/46u (w x d x h) RAL 9011 VME228012SB 5 Cabinet, server, pre-ass x 1200 x 2400 mm/50u (w x d x h) RAL 7047 VME248012S 5 Cabinet, server, pre-ass x 1200 x 2400 mm/50u (w x d x h) RAL 9011 VME248012CB 5 Cabinet, server, pre-ass x 1200 x 2400 mm/50u (w x d x h) RAL 9011 VME248012SB 5 Cabinet, server, pre-ass x 800 x 1300 mm/25u (w x d x h) RAL 9011 VME138080SB 5 Cabinet, server, pre-ass x 800 x 2000 mm/41u (w x d x h) RAL 7047 VME208012C 5 Cabinet, server, pre-ass x 800 x 2000 mm/41u (w x d x h) RAL 7047 VME208080C 5 Cabinet, server, pre-ass x 800 x 2000 mm/41u (w x d x h) RAL 7047 VME208080S 5 Cabinet, server, pre-ass x 800 x 2000 mm/41u (w x d x h) RAL 9011 VME208080CB 5 Cabinet, server, pre-ass x 800 x 2000 mm/41u (w x d x h) RAL 9011 VME208080SB 5 Cabinet, server, pre-ass x 800 x 2200 mm/46u (w x d x h) RAL 7047 VME228080C 5 Cabinet, server, pre-ass x 800 x 2200 mm/46u (w x d x h) RAL 7047 VME228080S 5 Cabinet, server, pre-ass x 800 x 2200 mm/46u (w x d x h) RAL 9011 VME228080CB 5 Cabinet, server, pre-ass x 800 x 2200 mm/46u (w x d x h) RAL 9011 VME228080SB 5 Cabinet, server, pre-ass x 800 x 2400 mm/50u (w x d x h) RAL 7047 VME248012C 5 Cable Management Panel incl. 6x shunting eye - 46U - RAL 9011 MIR Cable Tie Strip - 46HE - RAL 9011 MIR Cable cleat, diameter 60 mm x 75 mm MCM Cable entry brush MBM , 83 Cable entry brush for base plate mm MLR Cable entry brushes for Duopac and Tripac TRI.KA Cable entry foam - 19-inch x 1U RAL 7047 MCS Cable entry foam - 19-inch x 1U RAL 9011 MCS5006B 62 Cable entry foam - 19-inch x 2U RAL 7047 MCS Cable entry foam - 19-inch x 2U RAL 9011 MCS5004B 62 Cable entry foam 19-inch x 1U - front panel 19-inch x 1U RAL 7047 MCS Cable entry foam 19-inch x 1U - front panel 19-inch x 1U RAL 9011 MCS5005B 62 Cable entry plate - 19-inch x 1,5 mm x 2U (l x d x h) RAL 7047 MCS , 62 Cable entry plate - 19-inch x 1,5 mm x 2U (l x d x h) RAL 9011 MCS5002B 62, 62 Cable guide with controlled bend radius left MCM Cable guide with controlled bend radius right MCM Cable guides 10x and mounting bracket 25U MCM Cable guides 10x and mounting bracket 41U MCM Cable guides 10x and mounting bracket 46U MCM

137 Index Description Article no. Page Cable guides 10x, 50U mounting profile MCM Cable guides 20x MCM Cable guides 38x, 41U mounting profile MCM Cable guides 43x, 46U mounting profile MCM Cable guides 47x, 50U mounting profile MCM Cable guides 6x and mounting bracket 6U MCM Cable guides 76x, 41U mounting profile MCM Cable guides 86x, 46U mounting profile MCM Cable guides 94x, 50U mounting profile MCM Cable overlength cassette - 19" MCM Cable tray sendzimir MLR mm x 42HE MLR Cable tray sinked mm x 25U (w x h) MCM Cable tray sinked mm x 41U (w x h) MCM Cable tray sinked mm x 46U (w x h) MCM Cable tray sinked mm x 50U (w x h) MCM Cable tray sinked mm x 25U (w x h) MCM Cable tray sinked mm x 41U (w x h) MCM Cable tray sinked mm x 46U (w x h) MCM Cable tray sinked mm x 50U (w x h) MCM Cable trunk x 65 x 2000 mm (w x d x h) MCM Cable trunk x 65 x 2000 mm (w x d x h) MCM Cable trunk - 44 x 45 x 2000 mm (w x d x h) MCM Cable trunk - 86 x 65 x 2000 mm (w x d x h) MCM Cable trunk front - back telescopic mm MCM Cage nut M5 - (100 pieces) MFM Cage nut M5 - (20 pieces) MFM , 94 Cage nut M6 - (100 pieces) MFM Cage nut M6 - (20 pieces) MFM , 94 Castors, set of 2 castors with brakes and 2 castors without brakes MSM Castors, set of 4 castors without brakes MSM Cleats (2) including 2U mounting plate RAL 7047 MCM Cleats (2) including 2U mounting plate RAL 9011 MCM2010B 46 Click fasteners for power strip mounting MWETN01 94 Corner guide rails 1U (set) - build-in mm MPR Corner guide rails 1U (set) - build-in mm MPR Corner guide rails 1U (set) - build-in mm MPR Corner guide rails MLR 1 HE, 2 pieces mm MLR Cover plate RAL 7047 MBM Cover plate RAL 9011 MBM1001B 22, 86 Cylinder lock MSP Cylinder, 2-points Fix Easy lock MLK Cylinder, 2-points Fix Easy lock MLK Cylinder, 2-points Fix Easy lock MLK D Depth post for divided 19-inch x 1000 mm (w x d) MPR Depth post for divided 19-inch x 600 mm (w x d) MPR Depth post for divided 19-inch x 800 mm (w x d) MPR Depth post for divided 19-inch x 900 mm (w x d) MPR Depth post for divided 19-inch x 1000 mm (w x d) MPR Depth post for divided 19-inch x 1200 mm (w x d) MPR Depth post for divided 19-inch x 600 mm (w x d) MPR Depth post for divided 19-inch x 800 mm (w x d) MPR Depth post for divided 19-inch x 900 mm (w x d) MPR Depth post frame for 19-inch profiles (2x) (2x) mm (d) MPR Depth post frame for 19-inch profiles (2x) mm (d) MPR Depth post frame for 19-inch profiles (2x) mm (d) MPR Depth post frame for 19-inch profiles (2x) mm (d) MPR Depth post frame for 19-inch profiles (2x) mm (d) MPR Depth post frame for 19-inch profiles mm (d) MPR Depth post frame for 19-inch profiles mm (d) MPR Depth post frame for 19-inch profiles mm (d) MPR Depth post frame for 19-inch profiles mm (d) MPR Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

138 Description Article no. Page Depth post frame for 19-inch profiles mm (d) MPR Divider panel mm x 41U/73ME (d x h) Sendzimir MTP Divider panel mm x 46U/81ME (d x h) Sendzimir MTP Divider panel mm x 50U/89ME (d x h) Sendzimir MTP Divider panel mm x 41U/73ME (d x h) Sendzimir MTP Divider panel mm x 46U/81ME (d x h) Sendzimir MTP Divider panel mm x 50U/89ME (d x h) Sendzimir MTP Divider panel with 3x cable entry hole 60 mm mm x 41U/73ME (d x h) Sendzimi MTP Divider panel with 3x cable entry hole 60 mm mm x 46U/81ME (d x h) Sendzimi MTP Divider panel with 3x cable entry hole 60 mm mm x 50U/89ME (d x h) Sendzimi MTP Divider panel with 3x cable entry hole 60 mm mm x 41U/73ME (d x h) Sendzimi MTP Divider panel with 3x cable entry hole 60 mm mm x 46U/81ME (d x h) Sendzimi MTP Divider panel with 3x cable entry hole 60 mm mm x 50U/89ME (d x h) Sendzimi MTP Document holder, A4-size, installation space 30 mm MDH Door MLR, single, blind x 42HE (w x h) MLR Door MLR, single, glass x 42HE (w x h) MLR Door seal, rubber - 12U/21ME MFR Door seal, rubber - 16U/29ME MFR Door seal, rubber - 21U/37ME MFR Door seal, rubber - 25U/45ME MFR Door seal, rubber - 37U/65ME MFR Door seal, rubber - 41U/73ME MFR Door seal, rubber - 46U/81ME MFR Door switch MLS Door, 80% ventilated mm x 25U/45ME (w x h) RAL 7047 MFD Door, 80% ventilated mm x 41U/73ME (w x h) RAL 7047 MFD Door, 80% ventilated mm x 41U/73ME (w x h) RAL 9011 MFD7006B 25 Door, 80% ventilated mm x 46U/81ME (w x h) RAL 7047 MFD Door, 80% ventilated mm x 46U/81ME (w x h) RAL 9011 MFD7007B 25 Door, 80% ventilated mm x 50U/89ME (w x h) RAL 7047 MFD Door, 80% ventilated mm x 50U/89ME (w x h) RAL 9011 MFD7008B 25 Door, 80% ventilated mm x 25U/45ME (w x h) RAL 7047 MFD Door, 80% ventilated mm x 25U/45ME (w x h) RAL 9011 MFD7104B 25 Door, 80% ventilated mm x 41U/73ME (w x h) RAL 7047 MFD Door, 80% ventilated mm x 41U/73ME (w x h) RAL 9011 MFD7106B 25 Door, 80% ventilated mm x 46U/81ME (w x h) RAL 7047 MFD Door, 80% ventilated mm x 46U/81ME (w x h) RAL 9011 MFD7107B 25 Door, 80% ventilated mm x 50U/89ME (w x h) RAL 7047 MFD Door, 80% ventilated mm x 50U/89ME (w x h) RAL 9011 MFD7108B 25 Door, blank mm x 12U/21ME (w x h) RAL 7047 MFD Door, blank mm x 16U/29ME (w x h) RAL 7047 MFD Door, blank mm x 21U/37ME (w x h) RAL 7047 MFD Door, blank mm x 25U/45ME (w x h) RAL 7047 MFD Door, blank mm x 37U/65ME (w x h) RAL 7047 MFD Door, blank mm x 41U/73ME (w x h) RAL 7047 MFD Door, blank mm x 41U/73ME (w x h) RAL 9011 MFD0006B 24 Door, blank mm x 46U/81ME (w x h) RAL 7047 MFD Door, blank mm x 46U/81ME (w x h) RAL 9011 MFD0007B 24 Door, blank mm x 25U/45ME (w x h) RAL 7047 MFD Door, blank mm x 37U/65ME (w x h) RAL 7047 MFD Door, blank mm x 41U/73ME (w x h) RAL 7047 MFD Door, blank mm x 41U/73ME (w x h) RAL 9011 MFD0106B 24 Door, blank mm x 46U/81ME (w x h) RAL 7047 MFD Door, blank mm x 46U/81ME (w x h) RAL 9011 MFD0107B 24 Door, double, 80% ventilated mm x 41U/73ME (w x h) RAL 7047 MDD Door, double, 80% ventilated mm x 41U/73ME (w x h) RAL 9011 MDD7006B 28 Door, double, 80% ventilated mm x 46U/81ME (w x h) RAL 7047 MDD Door, double, 80% ventilated mm x 46U/81ME (w x h) RAL 9011 MDD7007B 28 Door, double, 80% ventilated mm x 50U/89ME (w x h) RAL 7047 MDD Door, double, 80% ventilated mm x 50U/89ME (w x h) RAL 9011 MDD7008B 28 Door, double, 80% ventilated mm x 41U/73ME (w x h) RAL 7047 MDD Door, double, 80% ventilated mm x 41U/73ME (w x h) RAL 9011 MDD7106B 28 Door, double, 80% ventilated mm x 46U/81ME (w x h) RAL 7047 MDD Door, double, 80% ventilated mm x 46U/81ME (w x h) RAL 9011 MDD7107B 28

139 Index Description Article no. Page Door, double, 80% ventilated mm x 50U/89ME (w x h) RAL 7047 MDD Door, double, 80% ventilated mm x 50U/89ME (w x h) RAL 9011 MDD7108B 28 Door, double, blank mm x 41U/73ME (w x h) RAL 7047 MDD Door, double, blank mm x 46U/81ME (w x h) RAL 7047 MDD Door, double, glass grey tinted mm x 41U/73ME (w x h) RAL 7047 MDD Door, double, glass grey tinted mm x 46U/81ME (w x h) RAL 7047 MDD Door, glass clear mm x 12U/21ME (w x h) RAL 7047 MFD Door, glass clear mm x 16U/29ME (w x h) RAL 7047 MFD Door, glass clear mm x 21U/37ME (w x h) RAL 7047 MFD Door, glass clear mm x 25U/45ME (w x h) RAL 7047 MFD Door, glass clear mm x 37U/65ME (w x h) RAL 7047 MFD Door, glass clear mm x 41U/73ME (w x h) RAL 7047 MFD Door, glass clear mm x 41U/73ME (w x h) RAL 9011 MFD1006B 26 Door, glass clear mm x 46U/81ME (w x h) RAL 7047 MFD Door, glass clear mm x 46U/81ME (w x h) RAL 9011 MFD1007B 26 Door, glass clear mm x 25U/45ME (w x h) RAL 7047 MFD Door, glass clear mm x 37U/65ME (w x h) RAL 7047 MFD Door, glass clear mm x 41U/73ME (w x h) RAL 7047 MFD Door, glass clear mm x 41U/73ME (w x h) RAL 9011 MFD1106B 26 Door, glass clear mm x 46U/81ME (w x h) RAL 7047 MFD Door, glass clear mm x 46U/81ME (w x h) RAL 9011 MFD1107B 26 Duopac, 19-inch profiles, set of 2-3U (h) DUO.PR Duopac, 19-inch profiles, set of 2-6U (h) DUO.PR Duopac, 19-inch profiles, set of 2-9U (h) DUO.PR Duopac, enclosure x 450 x 207 mm/3u (w x d x h) DUO Duopac, enclosure x 450 x 343 mm/6u (w x d x h) DUO Duopac, enclosure x 450 x 516 mm/9u (w x d x h) DUO E Earthing, cable set Varicon-LAN-Rack MLR Earthing, earthing cables - 3x 200 mm and 3x 400 mm MER Earthing, earthrail copper - 20 x 5 x 1800 mm/73me (w x d x h) MER Earthing, earthrail copper - 20 x 5 x 2000 mm/81me (w x d x h) MER Earthing, potential equalising rail MER End plate for broad cable duct RAL 7047 MCM End plate for broad cable duct RAL 9011 MCM0321B 41 End plate for narrow cable duct RAL 7047 MCM End plate for narrow cable duct RAL 9011 MCM0320B 41 Extension kit, 100 mm, for frame 41U/73MU mm (w) RAL 7047 VMF Extension kit, 100 mm, for frame 41U/73MU mm (w) RAL 7047 VMF Extension kit, 100 mm, for frame 46U/81MU mm (w) RAL 7047 VMF Extension kit, 100 mm, for frame 46U/81MU mm (w) RAL 7047 VMF F Fan unit with IEC connection, incl cabling RAL 7047 MCS Fan unit with IEC connection, incl cabling RAL 9011 MCS1004B 22, 84 Filter set for plinths mm (w) MSM Filter set for plinths mm (w) MSM Flat profiles, 19-inch, set of 2-12U/21ME (h) MPR Flat profiles, 19-inch, set of 2-16U/29ME (h) MPR Flat profiles, 19-inch, set of 2-21U/37ME (h) MPR Flat profiles, 19-inch, set of 2-25U/45ME (h) MPR Flat profiles, 19-inch, set of 2-25U/45ME (h) with angle brackets on top MPR Flat profiles, 19-inch, set of 2-37U/65ME (h) MPR Flat profiles, 19-inch, set of 2-37U/65ME (h) with angle brackets on top MPR Flat profiles, 19-inch, set of 2-41U/73ME (h) MPR Flat profiles, 19-inch, set of 2-41U/73ME (h) with angle brackets on top MPR Flat profiles, 19-inch, set of 2-46U/81ME (h) MPR Flat profiles, 19-inch, set of 2-46U/81ME (h) with angle brackets on top MPR Flat profiles, 19-inch, set of 2-50U/89ME (h) MPR Flat profiles, 19-inch, set of 2-50U/89ME (h) with angle brackets on top MPR Floor fixation set, 100 mm - 1 point MSM Floor fixation set- 1 point MSM Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

140 Description Article no. Page Frame x 1000 x 1300 mm/25u/45me (w x d x h) RAL 7047 VMF Frame x 1000 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 1000 x 2000 mm/41u/73me (w x d x h) RAL 9011 VMF B 13 Frame x 1000 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 1000 x 2200 mm/46u/81me (w x d x h) RAL 9011 VMF B 13 Frame x 1000 x 2400 mm/50u/89me (w x d x h) RAL 7047 VMF Frame x 1000 x 2400 mm/50u/89me (w x d x h) RAL 9011 VMF B 13 Frame x 1200 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 1200 x 2000 mm/41u/73me (w x d x h) RAL 9011 VMF B 13 Frame x 1200 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 1200 x 2200 mm/46u/81me (w x d x h) RAL 9011 VMF B 13 Frame x 1200 x 2400 mm/50u/89me (w x d x h) RAL 7047 VMF Frame x 1200 x 2400 mm/50u/89me (w x d x h) RAL 9011 VMF B 13 Frame x 600 x 1100 mm/21u/37me (w x d x h) RAL 7047 VMF Frame x 600 x 1300 mm/25u/45me (w x d x h) RAL 7047 VMF Frame x 600 x 1800 mm/37u/65me (w x d x h) RAL 7047 VMF Frame x 600 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 600 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 600 x 700 mm/12u/21me (w x d x h) RAL 7047 VMF Frame x 600 x 900 mm/16u/29me (w x d x h) RAL 7047 VMF Frame x 800 x 1100 mm/21u/37me (w x d x h) RAL 7047 VMF Frame x 800 x 1300 mm/25u/45me (w x d x h) RAL 7047 VMF Frame x 800 x 1800 mm/37u/65me (w x d x h) RAL 7047 VMF Frame x 800 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 800 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 800 x 700 mm/12u/21me (w x d x h) RAL 7047 VMF Frame x 800 x 900 mm/16u/29me (w x d x h) RAL 7047 VMF Frame x 900 x 1300 mm/25u/45me (w x d x h) RAL 7047 VMF Frame x 900 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 900 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 1000 x 1300 mm/25u/45me (w x d x h) RAL 7047 VMF Frame x 1000 x 1300 mm/25u/45me (w x d x h) RAL 9011 VMF B 13 Frame x 1000 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 1000 x 2000 mm/41u/73me (w x d x h) RAL 9011 VMF B 13 Frame x 1000 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 1000 x 2200 mm/46u/81me (w x d x h) RAL 9011 VMF B 13 Frame x 1000 x 2400 mm/50u/89me (w x d x h) RAL 7047 VMF Frame x 1000 x 2400 mm/50u/89me (w x d x h) RAL 9011 VMF B 13 Frame x 1200 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 1200 x 2000 mm /41U/73ME (w x d x h) RAL 9011 VMF B 13 Frame x 1200 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 1200 x 2200 mm/46u/81me (w x d x h) RAL 9011 VMF B 13 Frame x 1200 x 2400 mm/50u/89me (w x d x h) RAL 7047 VMF Frame x 1200 x 2400 mm/50u/89me (w x d x h) RAL 7047 VMF B 13 Frame x 600 x 1300 mm/25u/45me (w x d x h) RAL 7047 VMF Frame x 600 x 1800 mm/37u/65me (w x d x h) RAL 7047 VMF Frame x 600 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 600 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 800 x 1300 mm/25u/45me (w x d x h) RAL 7047 VMF Frame x 800 x 1300 mm/25u/45me (w x d x h) RAL 9011 VMF138080B 13 Frame x 800 x 1800 mm/37u/65me (w x d x h) RAL 7047 VMF Frame x 800 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 800 x 2000 mm/41u/73me (w x d x h) RAL 9011 VMF208080B 13 Frame x 800 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Frame x 800 x 2200 mm/46u/81me (w x d x h) RAL 9011 VMF228080B 13 Frame x 900 x 1300 mm/25u/45me (w x d x h) RAL 7047 VMF Frame x 900 x 2000 mm/41u/73me (w x d x h) RAL 7047 VMF Frame x 900 x 2200 mm/46u/81me (w x d x h) RAL 7047 VMF Front panel, MFE - 19-inch x 1 mm x 1U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 1U (w x d x h) RAL 9011 MFE0101B 56 Front panel, MFE - 19-inch x 1 mm x 2U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 2U (w x d x h) RAL 9011 MFE0102B 56 Front panel, MFE - 19-inch x 1 mm x 3U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 3U (w x d x h) RAL 9011 MFE0103B 56

141 Index Description Article no. Page Front panel, MFE - 19-inch x 1 mm x 6U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 6U (w x d x h) RAL 9011 MFE0104B 56 Front panel, MFE - 19-inch x 1 mm x 6U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 6U (w x d x h) RAL 9011 MFE0114B 57 Front panel, MFE - 19-inch x 1 mm x 9U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 9U (w x d x h) RAL 9011 MFE0105B 56 Front panel, MFE - 19-inch x 1 mm x 1U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 1U (w x d x h) RAL 9011 MFE0111B 57 Front panel, MFE - 19-inch x 1 mm x 2U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 2U (w x d x h) RAL 9011 MFE0112B 57 Front panel, MFE - 19-inch x 1 mm x 3U (w x d x h) RAL 7047 MFE Front panel, MFE - 19-inch x 1 mm x 3U (w x d x h) RAL 9011 MFE0113B 57 H Heat baffle RAL 7047 MCS Heat baffle RAL 9011 MCS2001B 61 I Inlet duct 1U front to back, telescopic mm Sendzimir MRS Inlet duct 2U front to back, telescopic mm Sendzimir MRS Insert module base / top, fan unit MBM Insert module base / top, fan unit, RAL 9011 MBM1004B 22, 84 L Lid for broad cable duct (600 mm) for 600 mm wide cabinet, RAL 7047 MCM Lid for broad cable duct (600 mm) for 600 mm wide cabinet, RAL 9011 MCM0312B 41 Lid for broad cable duct (600 mm) for 800 mm wide cabinet, RAL 7047 MCM Lid for broad cable duct (600 mm) for 800 mm wide cabinet, RAL 9011 MCM0313B 41 Lid for broad cable duct (600 mm) for VariCondition H2O/DX, RAL 7047 MCM Lid for broad cable duct (600 mm) for VariCondition H2O/DX, RAL 9011 MCM0319B 42 Lid for cable bridge (150 mm wide) mm, RAL 7047 MCM Lid for cable bridge (150 mm wide) mm, RAL 9011 MCM0323B 44 Lid for cable bridge (150 mm wide) mm, RAL 7047 MCM Lid for cable bridge (150 mm wide) mm, RAL 9011 MCM0322B 44 Lid for narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 7047 MCM Lid for narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 9011 MCM0310B 41 Lid for narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 7047 MCM Lid for narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 9011 MCM0311B 41 Lid for narrow cable duct (200 mm) for VariCondition H2O/DX, RAL 7047 MCM Lid for narrow cable duct (200 mm) for VariCondition H2O/DX, RAL 9011 MCM0318B 42 Lighting set, 19-inch x410 mm (w x h) MLS Lighting set, 19-inch x 30 mm (w x h) MLS Lock, blind stop for swivel handle MLK Lock, for swivel handle, EK-333 MLK Lock, wilka lock for swivel handle MLK Locking mechanism internal left mm (d) MSA Locking mechanism internal left mm (d) MSA Locking mechanism internal left mm (d) MSA Locking mechanism internal right mm (d) MSA Locking mechanism internal right mm (d) MSA Locking mechanism internal right mm (d) MSA M Mounting-air closure plate 19-inch for max. 17 TFT monitor, RAL 9011, 8U MPM MWE door glass clear 12 U MWEGD12 89 MWE door glass clear 15 U MWEGD15 89 MWE door glass clear 21 U MWEGD21 89 MWE door glass clear 6 U MWEGD06 89 MWE door glass clear 9 U MWEGD09 89 MWE, 19-inch profiles, set of 2-12U (h) MWEPR12 90 MWE, 19-inch profiles, set of 2-15U (h) MWEPR15 90 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

142 Description Article no. Page MWE, 19-inch profiles, set of 2-21U (h) MWEPR21 90 MWE, 19-inch profiles, set of 2-6U (h) MWEPR06 90 MWE, 19-inch profiles, set of 2-9U (h) MWEPR09 90 MWE, cable entry brush MWECB01 92 MWE, corner guide rails, set of 2-1U (h) MWECS01 93 MWE, door, metal, powder coated - 12U (h) MWEMD12 89 MWE, door, metal, powder coated - 15U (h) MWEMD15 89 MWE, door, metal, powder coated - 21U (h) MWEMD21 89 MWE, door, metal, powder coated - 6U (h) MWEMD06 89 MWE, door, metal, powder coated - 9U (h) MWEMD09 89 MWE, mounting set for power strip MWEPS10 94 MWE, power strip, Schuko, 6 outlets MWEPS01 94 MWE, power strip, UTE, 6 outlets MWEPS02 94 MWE, thermostate MWETF01 23, 93 MWE, thermostate MWETF02 23, 93 MWE, top plate with fan unit mm (d) MWEFP MWE, top plate with fan unit mm (d) MWEFP MWE, top plate with fan unit mm (d) MWEFP MWE, wall enclosure x 425 x 342 mm/6he (w x d x h) MWE06425G 88 MWE, wall enclosure x 525 x 342 mm/6he (w x d x h) MWE06525G 88 MWE, wall enclosure x 525 x 476 mm/9he (w x d x h) MWE09525G 88 MWE, wall enclosure x 525 x 609 mm/12he (w x d x h) MWE12525G 88 MWE, wall enclosure x 525 x 742 mm/15he (w x d x h) MWE15525G 88 MWE, wall enclosure x 625 x 1009 mm/21he (w x d x h) MWE21625G 88 MWE, wall enclosure x 625 x 476 mm/9he (w x d x h) MWE09625G 88 MWE, wall enclosure x 625 x 609 mm/12he (w x d x h) MWE12625G 88 MWE, wall enclosure x 625 x 742 mm/15he (w x d x h) MWE15625G 88 Minkels 1U front panel, plastic RAL9005, 25 pieces MFE Minkels Integration Rack x 800 x 1000 mm (h x w x d) - RAL OL150 MIR CB 10 Minkels Integration Rack x 800 x 1000 mm (h x w x d) - RAL OL62.5 MIR CB 10 Minkels Integration Rack x 800 x 1200 mm (h x w x d) - RAL OL150 MIR CB 10 Minkels Integration Rack x 800 x 1200 mm (h x w x d) - RAL OL250 MIR CB 10 Minkels Integration Rack x 800 x 1200 mm (h x w x d) - RAL OL62.5 MIR CB 10 Minkels Integration Rack x 800 x 1000 mm (h x w x d) - RAL OL150 MIR CB 10 Minkels Integration Rack x 800 x 1000 mm (h x w x d) - RAL OL62.5 MIR CB 10 Minkels Integration Rack x 800 x 1000 mm (h x w x d) - RAL OL62.5 MIR CB 10 Minkels Integration Rack x 800 x 1200 mm (h x w x d) - RAL OL150 MIR CB 10 Minkels Integration Rack x 800 x 1200 mm (h x w x d) - RAL OL250 MIR CB 10 Mix of frontpanels, 240 U in total RAL 7047 MFE Mix of frontpanels, 240 U in total RAL 9011 MFE1120B 58 Mounting bracket (4x) for the cable cleat + 4x cable cleat MCM Mounting depth post mm (d) MPR Mounting depth post mm (d) MPR Mounting depth post mm (d) MPR Mounting depth post mm (d) MPR Mounting depth post mm (d) MPR Mounting material, plate screws, 22 pieces MWEXS01 94 Mounting set for two power strips besides each other MPS Mounting width post mm (w) MPR Mounting width post mm (w) MPR Mounting-brackets universal (set of 4) MCE N Narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 7047 MCM Narrow cable duct (200 mm) for 600 mm wide cabinet, RAL 9011 MCM0300B 40 Narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 7047 MCM Narrow cable duct (200 mm) for 800 mm wide cabinet, RAL 9011 MCM0301B 40 Narrow cable duct (200 mm) for VariCondition H2O/DX, RAL 7047 MCM Narrow cable duct (200 mm) for VariCondition H2O/DX, RAL 9011 MCM0316B 42 P Partition cable duct small (200 mm) for 600 mm wide cabinet, RAL 7047 MCM Partition cable duct small (200 mm) for 600 mm wide cabinet, RAL 9011 MCM0410B 40

143 Index Description Article no. Page Partition cable duct small (200 mm) for 800 mm wide cabinet, RAL 7047 MCM Partition cable duct small (200 mm) for 800 mm wide cabinet, RAL 9011 MCM0412B 40 Plinth 100 mm front/rear, blank mm (w) RAL 7047 MSM Plinth 100 mm front/rear, blank mm (w) RAL 9011 MSM2101B 17 Plinth 100 mm front/rear, blank mm (w) RAL 7047 MSM Plinth 100 mm front/rear, blank mm (w) RAL 9011 MSM2201B 17 Plinth 100 mm front/rear, perforated mm (w) RAL 7047 MSM Plinth 100 mm front/rear, perforated mm (w) RAL 9011 MSM2102B 17 Plinth 100 mm front/rear, perforated mm (w) RAL 7047 MSM Plinth 100 mm front/rear, perforated mm (w) RAL 9011 MSM2202B 17 Plinth 100 mm side, blank mm (d) MSM Plinth 100 mm side, blank mm (d) RAL 9011 MSM2503B 17 Plinth 100 mm side, blank mm (d) RAL 7047 MSM Plinth 100 mm side, blank mm (d) RAL 9011 MSM2603B 17 Plinth 100 mm side, blank mm (d) RAL 7047 MSM Plinth 100 mm side, blank mm (d) RAL 7047 MSM Plinth 100 mm side, blank mm (d) RAL 9011 MSM2203B 17 Plinth 100 mm side, blank mm (d) MSM Plinth 25 mm front/rear, blank mm (w) RAL 7047 MSM Plinth 25 mm front/rear, blank mm (w) RAL 9011 MSM1101B 16 Plinth 25 mm front/rear, blank mm (w) AG2RAL 9011 MSM1201B 16 Plinth 25 mm front/rear, blank mm (w) RAL 7047 MSM Plinth 25 mm front/rear, perforated mm (w) RAL 7047 MSM Plinth 25 mm front/rear, perforated mm (w) RAL 9011 MSM1102B 16 Plinth 25 mm front/rear, perforated mm (w) RAL 7047 MSM Plinth 25 mm front/rear, perforated mm (w) RAL 9011 MSM1202B 16 Plinth 25 mm side, blank mm (d) RAL 7047 MSM Plinth 25 mm side, blank mm (d) RAL 9011 MSM1403B 16 Plinth 25 mm side, blank mm (d) RAL 7047 MSM Plinth 25 mm side, blank mm (d) RAL 9011 MSM1503B 16 Plinth 25 mm side, blank mm (d) RAL 7047 MSM Plinth 25 mm side, blank mm (d) RAL 7047 MSM Plinth 25 mm side, blank mm (d) RAL 9011 MSM1203B 16 Plinth 25 mm side, blank mm (d) RAL 7047 MSM Plinth front/rear (in combination with castors) mm (w) RAL 7047 MSM Plinth front/rear (in combination with castors) mm (w) RAL 7047 MSM Plinth side (in combination with castors) mm (d) RAL 7047 MSM Plinth side (in combination with castors) mm (d) RAL 7047 MSM Plinth side (in combination with castors) mm (d) RAL 7047 MSM Plinth side (in combination with castors) mm (d) RAL 7047 MSM Power strip aluminium Mounting set compact double MPS Power strip aluminium, 1-phase, 16A, 12xC13 MPS Power strip aluminium, 1-phase, 16A, 12xC13 - CEE form input MPS Power strip aluminium, 1-phase, 16A, 16xC13 MPS Power strip aluminium, 1-phase, 16A, 18xC13 MPS Power strip aluminium, 1-phase, 16A, 18xC13 and 4xC19 MPS Power strip aluminium, 1-phase, 16A, 18xC13 and 4xC19, current meter MPS Power strip aluminium, 1-phase, 16A, 8xC13 MPS Power strip aluminium, 1-phase, 32A, 24xC13 MPS Power strip aluminium, 1-phase, 32A, 8xC13 MPS Power strip aluminium, 13 sockets MPS Power strip aluminium, 19-inch mounting, 7 sockets MPS Power strip aluminium, 3-phase, 16A, 12xC13 MPS Power strip aluminium, 3-phase, 16A, 18xC13 and 6xC19 MPS Power strip aluminium, 3-phase, 16A, 18xC13 and 6xC19, current meter MPS Power strip aluminium, SCHUKO, 13 sockets MPS Power strip aluminium, SCHUKO, 19 sockets MPS Power strip aluminium, SCHUKO, 19-inch and vertical mounting, 9 sockets MPS Power strip aluminium, SCHUKO, 4 sockets MPS Power strip aluminium, SCHUKO, excess-volt protection filter, 12 sockets MPS Power strip aluminium, SCHUKO, with switch, 19-inch mounting, 8 sockets MPS Power strip aluminium, UTE, 13 sockets MPS Power strip aluminium, UTE, 19 sockets MPS Power strip aluminium, UTE, 19-inch mounting, 9 sockets MPS Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

144 Description Article no. Page Power strip aluminium, UTE, 4 sockets MPS Power strip aluminium, UTE, excess-volt protection filter, 12 sockets MPS Power strip aluminium, mounting set MPS Power strip aluminium, mounting set compact MPS Power strip plastic, SCHUKO, 12 sockets MPS Power strip plastic, SCHUKO, 19-inch mounting, 6 sockets MPS Power strip plastic, SCHUKO, 9 sockets MPS Power strip plastic, SCHUKO, with overvoltage fuse filter, 6 sockets MPS Power strip plastic, UTE, 12 sockets MPS Power strip plastic, UTE, 19-inch mounting, 6 sockets MPS Power strip plastic, UTE, 9 sockets MPS Power strip plastic, mounting set MPS Profiles, metric, set of 2-73ME (h) - Max. 450 kg MPR Profiles, metric, set of 2-81ME (h) - Max. 450 kg MPR Profiles, number strip for 19-inch profile 46U (h) MPR Profiles, number strip for 19-inch profile 50U (h) MPR Profiles, number strip for metric profile 81ME (h) MPR R Rack, MLR - base frame, 542 x 740 x 2000 mm 42HE (b x d x h) MLR Rack, MLR - baying rack, 800 x 800 x 2000 mm 42HE (b x d x h) MLR Rack, MLR - stand alone rack, 800 x 800 x 2000 mm 42HE (b x d x h) MLR Rear panel mm x 12U/21ME (w x h) RAL 7047 MRP Rear panel mm x 16U/29ME (w x h) RAL 7047 MRP Rear panel mm x 21U/37ME (w x h) RAL 7047 MRP Rear panel mm x 25U/45ME (w x h) RAL 7047 MRP Rear panel mm x 37U/65ME (w x h) RAL 7047 MRP Rear panel mm x 41U/73ME (w x h) RAL 7047 MRP Rear panel mm x 46U/81ME (w x h) RAL 7047 MRP Rear panel mm x 25U/45ME (w x h) RAL 7047 MRP Rear panel mm x 37U/65ME (w x h) RAL 7047 MRP Rear panel mm x 41U/73ME (w x h) RAL 7047 MRP Rear panel mm x 46U/81ME (w x h) RAL 7047 MRP S Screws, decorative, with washer (black) M5 - (100 pieces) MFM Screws, decorative, with washer (black) M5 - (20 pieces) MFM , 94 Screws, decorative, with washer (black) M6 - (100 pieces) MFM Screws, decorative, with washer (black) M6 - (20 pieces) MFM , 94 Shelf, MFE - 19-inch x 250 x 18,5 mm (w x d x h) RAL 7047 MFE Shelf, MFE - 19-inch x 350 x 18,5 mm (w x d x h) RAL 7047 MFE Shelf, MFE - 19-inch x 500 x 18,5 mm (w x d x h) RAL 7047 MFE Shelf, MFE - 19-inch x 650 x 18,5 mm (w x d x h) RAL 7047 MFE Shelf, MFE - 19-inch x 650 x 18,5 mm (w x d x h) RAL 9011 MFE0004B 64 Shelf, MFE - fixing clips, set of 4 pieces MFE Shelf, cable guide for telescopic shelf MPA Shelf, cantilever - 19-inch x 250 mm x 2U (w x d x h) RAL 7047 MPL , 92, 96, 98 Shelf, cantilever - 19-inch x 350 mm x 2U (w x d x h) RAL 7047 MPL , 92, 96, 98 Shelf, cantilever - 19-inch x 350 mm x 2U (w x d x h) RAL 9011 MPL0312B 66 Shelf, full size fixed x 600 mm (w x d) RAL 7047 MPL Shelf, full size fixed x 800 mm (w x d) RAL 7047 MPL Shelf, full size fixed x 600 mm (w x d) RAL 7047 MPL Shelf, full size fixed x 800 mm (w x d) RAL 7047 MPL Shelf, telescopic - 19-inch x 350 x 55 mm (w x d x h) RAL 7047 MPL , 98 Shelf, telescopic - 19-inch x 500 x 55 mm (w x d x h) RAL 7047 MPL Shelf, telescopic - 19-inch x 700 x 55 mm (w x d x h) RAL 7047 MPL Shelf, variable - 19-inch x 250 x 12 mm (w x d x h) RAL 7047 MPL , 92, 96, 98 Shelf, variable - 19-inch x 350 x 12 mm (w x d x h) RAL 7047 MPL , 92, 96, 98 Shelf, variable - 19-inch x 500 x 12 mm (w x d x h) RAL 7047 MPL

145 Index Description Article no. Page Shelf, variable - 19-inch x 700 x 12 mm (w x d x h) RAL 7047 MPL Shelf, variable 100 kg - 19-inch x 700 x 25 mm (w x d x h) RAL 7047 MPL Shelf, variable 100 kg - 19-inch x 700 x 25 mm (w x d x h) RAL 9011 MPL0014B 65 Shelf, variable 100 kg - 19-inch x 800 x 25 mm (w x d x h) RAL 7047 MPL Shelf, variable 100 kg - 19-inch x 800 x 25 mm (w x d x h) RAL 9011 MPL0015B 65 Shunting comb with 4 teeth, 19-inch RAL 7047 MCM , 91 Shunting comb with 4 teeth, 19-inch RAL 9011 MCM0011B 51, 91 Shunting comb with 5 synthetic teeth MCM Shunting eye horizontal, front mounting 1U - 40 x 86 mm (w x d) MCM , 81, 91 Shunting eye horizontal, front mounting 1U - 40 x 86 mm (w x d) MCM , 81 Shunting eye horizontal, front mounting 2U - 84 x 86 mm (b x d) MCM , 81 Shunting eye horizontal, front mounting 2U - 84 x 86 mm (b x d) MCM , 81 Shunting eye vertical, side mounting 19-inch x 154 mm (w x d) MCM , 81 Shunting eye vertical, side mounting 19-inch x 154 mm (w x d) MCM , 81 Shunting eye vertical, side mounting height post - 45 x 74 mm (w x d) MCM , 82, 91 Shunting eye vertical, side mounting height post - 45 x 74 mm (w x d) MCM , 82 Shunting eye vertical, side mounting height post - 85 x 165 mm (w x d) MCM Shunting eye vertical, side mounting height post - 85 x 165 mm (w x d) MCM Shunting eye vertical, side mounting height post x 120 mm (w x d) MCM Side panel mm x 25U/45ME (d x h) RAL 7047 MSP Side panel mm x 25U/45ME (d x h) RAL 9011 MSP0304B 32 Side panel mm x 41U/73ME (d x h) RAL 7047 MSP Side panel mm x 41U/73ME (d x h) RAL 9011 MSP0306B 11, 32 Side panel mm x 46U/81ME (d x h) RAL 7047 MSP Side panel mm x 46U/81ME (d x h) RAL 9011 MSP0307B 11, 32 Side panel mm x 50U/89ME (d x h) RAL 7047 MSP Side panel mm x 50U/89ME (d x h) RAL 9011 MSP0308B 32 Side panel mm x 41U/73ME (d x h) RAL 7047 MSP Side panel mm x 41U/73ME (d x h) RAL 9011 MSP0406B 11, 32 Side panel mm x 46U/81ME (d x h) RAL 7047 MSP Side panel mm x 46U/81ME (d x h) RAL 9011 MSP0407B 11, 32 Side panel mm x 50U/89ME (d x h) RAL 7047 MSP Side panel mm x 50U/89ME (d x h) RAL 9011 MSP0408B 32 Side panel mm x 12U/21ME (d x h) RAL 7047 MSP Side panel mm x 16U/29ME (d x h) RAL 7047 MSP Side panel mm x 21U/37ME (d x h) RAL 7047 MSP Side panel mm x 25U/45ME (d x h) RAL 7047 MSP Side panel mm x 37U/65ME (d x h) RAL 7047 MSP Side panel mm x 41U/73ME (d x h) RAL 7047 MSP Side panel mm x 46U/81ME (d x h) RAL 7047 MSP Side panel mm x 12U/21ME (d x h) RAL 7047 MSP Side panel mm x 16U/29ME (d x h) RAL 7047 MSP Side panel mm x 21U/37ME (d x h) RAL 7047 MSP Side panel mm x 25U/45ME (d x h) RAL 7047 MSP Side panel mm x 25U/45ME (d x h) RAL 9011 MSP0104B 32 Side panel mm x 37U/65ME (d x h) RAL 7047 MSP Side panel mm x 41U/73ME (d x h) RAL 7047 MSP Side panel mm x 41U/73ME (d x h) RAL 9011 MSP0106B 32 Side panel mm x 46U/81ME (d x h) RAL 7047 MSP Side panel mm x 46U/81ME (d x h) RAL 9011 MSP0107B 32 Side panel mm x 25U/45ME (d x h) RAL 7047 MSP Side panel mm x 41U/73ME (d x h) RAL 7047 MSP Side panel mm x 46U/81ME (d x h) RAL 7047 MSP Side panel MLR, 800 mm x 42HE (d x h) MLR Side skirt seal kit - rubber -UL94 MCS Side skirt side panel 150 mm deep with foil, for cabinets 41U/2000 mm RAL 7047 MCS Side skirt side panel 150 mm deep with foil, for cabinets 41U/2000 mm RAL 9011 MCS0126B 60 Side skirt side panel 150 mm deep with foil, for cabinets 46U/2200 mm RAL 7047 MCS Side skirt side panel 150 mm deep with foil, for cabinets 46U/2200 mm RAL 9011 MCS0127B 60 Side skirt side panel 150 mm deep with foil, for cabinets 50U/2400 mm RAL 7047 MCS Side skirt side panel 150 mm deep with foil, for cabinets 50U/2400 mm RAL 9011 MCS0128B 60 Side skirt side panel 150 mm deep, for cabinets 41U/2000 mm RAL 7047 MCS Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

146 Description Article no. Page Side skirt side panel 150 mm deep, for cabinets 41U/2000 mm RAL 9011 MCS0116B 60 Side skirt side panel 150 mm deep, for cabinets 46U/2200 mm RAL 7047 MCS Side skirt side panel 150 mm deep, for cabinets 46U/2200 mm RAL 9011 MCS0117B 60 Side skirt side panel 150 mm deep, for cabinets 50U/2400 mm RAL 7047 MCS Side skirt side panel 150 mm deep, for cabinets 50U/2400 mm RAL 9011 MCS0118B 60 Side skirt side panel 300 mm mm deep with foil, for cabinets 41U/2000 mm RAL 7047 MCS Side skirt side panel 300 mm deep with foil, for cabinets 41U/2000 mm RAL 9011 MCS0026B 60 Side skirt side panel 300 mm deep with foil, for cabinets 46U/2200 mm RAL 7047 MCS Side skirt side panel 300 mm deep with foil, for cabinets 46U/2200 mm RAL 9011 MCS0027B 60 Side skirt side panel 300 mm deep with foil, for cabinets 50U/2400 mm RAL 7047 MCS Side skirt side panel 300 mm deep with foil, for cabinets 50U/2400 mm RAL 9011 MCS0028B 60 Side skirt side panel fewer holes 150 mm deep, for cabinets 41U/2000 mm RAL 7047 MCS Side skirt side panel fewer holes 150 mm deep, for cabinets 41U/2000 mm RAL 9011 MCS0136B 60 Side skirt side panel fewer holes 150 mm deep, for cabinets 46U/2200 mm RAL 7047 MCS Side skirt side panel fewer holes 150 mm deep, for cabinets 46U/2200 mm RAL 9011 MCS0137B 60 Side skirt side panel fewer holes 150 mm deep, for cabinets 50U/2400 mm RAL 7047 MCS Side skirt side panel fewer holes 150 mm deep, for cabinets 50U/2400 mm RAL 7047 MCS0138B 60 Side skirts blind with cable entry holes round 60 mm, 41U/2000 mmx800 mm RAL 7047 MCS Side skirts blind with cable entry holes round 60 mm, 41U/2000 mmx800 mm RAL 9011 MCS0206B 59 Side skirts blind with cable entry holes round 60 mm, 46U/2200 mmx800 mm RAL 7047 MCS Side skirts blind with cable entry holes round 60 mm, 46U/2200 mmx800 mm RAL 9011 MCS0207B 59 Side skirts blind with cable entry holes round 60 mm, 50U/2400 mmx800 mm RAL 7047 MCS Side skirts blind with cable entry holes round 60 mm, 50U/2400 mmx800 mm RAL 9011 MCS0208B 59 Side skirts, 19-inch - for 41U x 800 mm cabinets RAL 7047 MCS Side skirts, 19-inch - for 41U x 800 mm cabinets RAL 9011 MCS0006B 59 Side skirts, 19-inch - for 46U x 800 mm cabinets RAL 7047 MCS Side skirts, 19-inch - for 46U x 800 mm cabinets RAL 9011 MCS0007B 59 Side skirts, 19-inch - for 50U x 800 mm cabinets RAL 7047 MCS Side skirts, 19-inch - for 50U x 800 mm cabinets RAL 9011 MCS0008B 59 Side skirts, on behalf of 41U/2000 mm x 600 mm cabinets Sendzimir MCS Side skirts, on behalf of 46U/2200 mm x 600 mm cabinets Sendzimir MCS Side skirts, on behalf of 50U/2400 mm x 600 mm cabinets Sendzimir MCS Stability posts 19-inch x 1000 mm (w x d) MPR Stability posts 19-inch x 1200 mm (w x d) MPR Stability posts 19-inch x 600 mm (w x d) MPR Stability posts 19-inch x 800 mm (w x d) MPR Stability posts 19-inch x 900 mm (w x d) MPR Stability posts 19-inch x 1000 mm (w x d) MPR Stability posts 19-inch x 1200 mm (w x d) MPR Stability posts 19-inch x 600 mm (w x d) MPR Stability posts 19-inch x 800 mm (w x d) MPR Stability posts 19-inch x 900 mm (w x d) MPR Stiffener profile for base plate mm MBM Support spacer 100 mm MPR Swivel handle, 2-points Fix Easy lock MLK Swivel handle, 2-points Fix Easy lock MLK Swivel handle, 2-points Fix Easy lock MLK Swivel handle, 2-points Fix Easy lock, double door MLK Swivel handle, 2-points Fix Easy lock, double door MLK Swivel handle, 2-points Fix Easy lock, double door MLK Swivel handle, 2-points Fix Easy lock, with combination lock MLK Swivel handle, 2-points Fix Easy lock, with combination lock MLK Swivel handle, 2-points Fix Easy lock, with combination lock MLK Swivel handle, 2-points Fix Easy lock, with combination lock, double door MLK Swivel handle, 2-points Fix Easy lock, with combination lock, double door MLK Swivel handle, 2-points Fix Easy lock, with combination lock, double door MLK T Telescopic cable bridge mm (150 mm width), RAL 7047 MCM Telescopic cable bridge mm (150 mm width), RAL 9011 MCM0307B 43 Telescopic cable bridge mm (150 mm width), RAL 7047 MCM Telescopic cable bridge mm (150 mm width), RAL 9011 MCM0308B 43 Telescopic cable bridge mm (150 mm width), RAL 7047 MCM

147 Index Description Article no. Page Telescopic cable bridge mm (150 mm width), RAL 9011 MCM0306B 43 Thermostat for fan-units MCC Top mounting brackets 19-inch Set of 4 pieces MPR Top, 4 cut-outs, MLR x 800 mm mm MLR Top, blank, 3 cut-outs F/R x 1000 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs F/R x 1000 mm (w x d) RAL 9011 MRF0027B 21 Top, blank, 3 cut-outs L/R x 1000 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs L/R x 1000 mm (w x d) RAL 9011 MRF0031B 22 Top, blank, 3 cut-outs F/R x 1200 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs F/R x 1200 mm (w x d) RAL 9011 MRF0030B 21 Top, blank, 3 cut-outs L/R x 1200 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs L/R x 1200 mm (w x d) RAL 9011 MRF0032B 22 Top, blank, 3 cut-outs F/R x 600 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs F/R x 800 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs F/R x 900 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs L/R x 600 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs L/R x 800 mm (w x d) RAL 7047 MRF Top, blank, 3 cut-outs L/R x 800 mm (w x d) RAL 9011 MRF0120B 21 Top, blank, 4 cut-outs L/R x 1000 mm (w x d) RAL 7047 MRF Top, blank, 4 cut-outs L/R x 1000 mm (w x d) RAL 9011 MRF0028B 21 Top, blank, 4 cut-outs L/R x 1200 mm (w x d) RAL 7047 MRF Top, blank, 4 cut-outs L/R x 1200 mm (w x d) RAL 9011 MRF0029B 21 Top, blank, 4 cut-outs L/R x 900 mm (w x d) RAL 7047 MRF Tripac, 19-inch profiles, set of 2-15U (h) TRI.PR Tripac, 19-inch profiles, set of 2-21U (h) TRI.PR Tripac, 19-inch profiles, set of 2-21U (h) TRI.VP Tripac, 19-inch profiles, set of 2-9U (h) TRI.PR Tripac, fan unit with IEC connection TRI.VE Tripac, wall enclosure x 500 x 1011 mm/21he (w x d x h) TRI Tripac, wall enclosure x 500 x 478 mm/9he (w x d x h) TRI Tripac, wall enclosure x 500 x 744 mm/15he (w x d x h) TRI V VariControl-L Administration Suite management software MEL VariControl-L Basic swivel handle - 2 points 41HE (h), double door MEL VariControl-L Basic swivel handle - 2 points 46HE (h), double door MEL VariControl-L Basic swivel handle - 2 points 50HE (h), double door MEL VariControl-L Basic swivel handle, 2-points Fix Easy lock MEL VariControl-L Basic swivel handle, 2-points Fix Easy lock MEL VariControl-L Basic swivel handle, 2-points Fix Easy lock MEL VariControl-L Battery pack for external power of the HID swivel handle MEL VariControl-L Battery pack for external power of the HID swivel handle MEL VariControl-L Desktop Reader with IP-port MEL VariControl-L HID proximity card MEL VariControl-L HID, configurations cable - serial MEL VariControl-L HID-485 swivel handle - 2 points 41HE (h), double door MEL VariControl-L HID-485 swivel handle - 2 points 46HE (h), double door MEL VariControl-L HID-485 swivel handle - 2 points 50HE (h), double door MEL VariControl-L HID-485 swivel handle, 2-points Fix Easy lock MEL VariControl-L HID-485 swivel handle, 2-points Fix Easy lock MEL VariControl-L HID-485, Gateway V3 MEL VariControl-L HID-485, Gateway V3 configuration cable MEL VariControl-L HID-Direct swivel handle - 2 points 41HE (h), double door MEL VariControl-L HID-Direct swivel handle - 2 points 46HE (h), double door MEL VariControl-L HID-Direct swivel handle - 2 points 50HE (h), double door MEL VariControl-L HID-Direct swivel handle, 2-points Fix Easy lock MEL VariControl-L HID-Direct swivel handle, 2-points Fix Easy lock MEL VariControl-L HID-Direct swivel handle, 2-points Fix Easy lock MEL VariControl-L HID-Direct swivel handle, 2-points Fix Easy lock MEL VariControl-S 4-20mA converter MRM VariControl-S AC-voltage detector MRM VariControl-S GPRS modem for text message alerts (only with Pro controller) MRM VariControl-S Pro controller with 8 sensor-, 20 dry-contact- and 2 extensionport MRM0020LS 111 Minkels catalogue Benelux, English. Subject to change without notice. Contact our Sales Department for additional information.

148 Description Article no. Page VariControl-S Pro controller with 8 sensor-, 4 Camera- and 2 extensionports MRM0011L 111 VariControl-S Pro controller with 8 sensor-, 60 dry-contact- and 2 extensionport MRM0030LS 111 VariControl-S Pro controller with 8 sensor-, and 2 extensionports MRM0010LS 111 VariControl-S airflow sensor MRM VariControl-S controller with 2 sensorports (incl. 1 temperature sensor) MRM VariControl-S controller with 4 sensorports MRM VariControl-S controller with 8 sensor-, 20 dry-contact ports MRM VariControl-S controller with 8 sensor-, 60 dry-contact ports MRM VariControl-S controller with 8 sensorports MRM VariControl-S dry-contact sensor (adaptor) MRM VariControl-S dry-contact sensor with 8 ports (only with Pro controller) MRM VariControl-S humidity and temperature sensor MRM VariControl-S magnetic door switch MRM , 113 VariControl-S motion detector (PIR) MRM VariControl-S rope water leakage detector (3.3 m.) MRM VariControl-S rope water leakage detector extension (3.3 m.) MRM VariControl-S sensor controlled relay MRM VariControl-S siren & strobe light MRM VariControl-S smoke detector MRM VariControl-S temperature sensor MRM VariControl-S temperature sensor (daisy chainable till 8 sensors, only with Pro MRM VariControl-S temperature sensor with fixed cable (1 m.) MRM VariControl-S temperature sensor with fixed cable (2.5 m.) MRM VariControl-S universal camera (USB) MRM VariControl-S water leakage detector with fixed cable (33 m.) MRM VariControl-S water leakage detector with fixed cable (4.5 m.) MRM Varicontrol-S dome camera with pan/tilt control (USB) MRM Varicontrol-S extension controller with 16 dry-contact ports MRM Varicontrol-S extension controller with 8 sensorports MRM Velcro, roll - length 10m / width 16 mm FDH Ventilation plate 58% perforated RAL 7047 MBM Ventilation plate 58% perforated RAL 9011 MBM1008B 22 W Wall mounting mm (w) MRW

149