Belt Catalogue.

Transcription

1 Belt Catalogue

2 WRAP RAW EDGE COGED RIBBED / POLY V TIMING X set WRAP CONSTRUCTION CLASSICAL SECTION 8 Z A B 20 C 25 D E WEDGE SECTION SPZ 8.0 SPA SPB SPC 18.0 NARROW SECTION 3V V V (Degree) LIGHT DUTY SINGLE V Standard DIN IS 2494, BS 3790, ISO 4184 IS 2494, BS 3790, ISO 4184 IS 2494, BS 3790, ISO 4184 DIN IS 2494, BS 3790, ISO 4184 DIN IS 2494, BS 3790, ISO 4184 IS 2494 BS 3790 BS 3790 BS 3790 DIN 7753 BS 3790 RMA IP RMA IP RMA IP Application: Industrial drives such as pumps, generators, ballmills, crushers, compressors etc. Note: Intermediate sizes are available upon request DuraBand HXS BANDED 1 Pulley Dia " 9.5" " 16" 31.5" 31" 57" 44.5" 90" 5mm 576mm 1000mm 53mm 1861mm 19.5" " Mfg. 174" " mm 9110mm 16824mm 97mm 943mm 160" Belt Factor to to to L RMA IP " 177" L RMA IP " 359" L RMA IP " 242" Oil resistant & antistatic Maximum Belt linear speed (Classical section: up to m/sec, Wedge: up to 42 m/sec, Narrow: up to 45 m/sec) Temperature range: 18ºC to +80ºC ATEX certified FRAS Belts are also available (Degree) Pitch (Reference Standards: ISO 5290, ISO 5291, BS 3790) HZ " 174" HA " 255" HB " 370" HC " HD " HE " HSPZ mm 9080 mm HSPA mm 4515 mm HSPB mm 9331 mm HSPC mm 943 mm H3V " 180" H5V " 663" H8V " 905" Note: B, C, D, E, SPC & 8V section Belts in single and banded constructions can be supplied up to 1000" or 250 mm Enhanced power transmission capacity up to 25% sser number of Belts required as compared to multiple singlebelt drive High adhesion strength between tie band and the Belts Eliminates chances of mismatch in length as observed in multiple singlebelt drive Temperature range: 18ºC to +80ºC Antistatic, oil and heat resistant ATEX certified FRAS Belts are also available Manufactured through singlestagecuring process Application: Vertical shaft drives, agricultural drives, stone crushers, compressors, generator sets etc.

3 SPECIAL CONSTRUCTION B (17x14) B (17x16) A (x) 37 x 25 B (17x17) C (x20) B (17x) B (17x) C (x25) 37(37x25) D (32x) ECHELON XS VOYAGER XS For tiles industry 20 x " PTU B 37.0 TEXTURA XS CERAMICA XS EXTRACTOR XS (PTO) (PTHC) (PT6) 2 (PT7) Pattern Height (Degrees) For medical equipment.5" Temperature range: 18ºC to +80ºC Longer service life Excellent adhesion between top profile and the Belt Application specific Belts Designed for applications where power transmission and conveying of material is done simultaneously For foodgrain & ceramic industry 85" 85" 48" 356" 161" For ceramic and general industries 42" " 85" 66" 73" For ceramic industry 357" 356" 320" For carrot harvesting machines, horticultural industry " 142" 375" WRAP RAW EDGE COGED RIBBED / POLY V TIMING MUSCLE XS3 HIGH POWER, MAINTENANCEFREE SPZ SPA SPB SPC 3V 5V 8V 5 mm 576 mm 1000 mm 1861 mm 19.5" 47" 100" Mfg. 00 mm 9110 mm mm 943 mm 160" 657" 905" Designation Extremely high power rating up to 50% more than regular belt High efficiency up to 98% Maintenance free Extended service life & less machine downtime Antistatic complies with ISO 18 Superior oil & heat resistance REACH & RoHS compliant, provides an ecofriendly system Extended temperature range from 25 C to +100 C Note: PIXMuscleXS3 Belts in all other popular Wrap Belt sections and in Banded construction can be made available upon request. Application: Wire rope manufacturing industry, steel industry, power plants, textile industry, pharmaceutical Industry, food processing units 2

4 WRAP FRAS FIRE RESISTANT, ANTISTATIC FRAS XS Product : s: 8, Z, A, B, 20, C, 25, D, E, SPZ, SPA, SPB, 19, SPC, 3V, 5V, 8V RAW EDGE COGED RIBBED / POLY V FRAS HXS BANDED Product : s: HA, HB, HC, HD, HE, HZ, HSPZ, HSPA, HSPB, HSPC, H3V, H5V, H8V Ensures high level of protection against fire hazards Fire resistance test result of flame & glow time period is lesser than the desired 5 seconds, maximum time as per BS 3790 standard ATEX values for electrical resistance are approximately 1015 times more stringent than ISO 18, leading to a more safer drive (Value for PIX SPB section Belt observed 0.1 MÙ against 2 MÙ, maximum value of the ISO 18 standard) Resistance to emit inflammable substances while in operation Damagefree and crack resistance properties to ensure smooth operation Longer service life Dimensional stability Antistatic, oil and heat resistant Temperature range: 18?C to +80?C Application: Coal mines, fire prone areas, petrochemical installations etc. TIMING GALLANT HEAVY DUTY, HIGH POWER GALLANT XS Product : s: A, B, C, SPA, SPB, SPC, 5V, 8V GALLANT HXS BANDED Product : s: HA, HB, HC, HSPA, HSPB, HSPC, H5V, H8V Enhanced power transmission capacity Up to % in PIXGallant single Belts Up to 55% in PIXGallantHXS Banded Belts Especially treated outer tough cover reduces sidewall wear and withstands to sudden shear forces at peak loads Designed to exhibit excellent durability, strength, abrasion and wear resistance Unique performance under heavy shocks and impulse loads Low heat generation even at very high speed Best solution for compact drives as lesser number of Belts is required One single branding that combines all the major features and fit for any robust application Operating temperature range: 25 C to +100 C Application: Forestrywood cutter. Mining: Surface miner, stacker, excavators, reclaimers Construction Stone crushers, jaw crushers, cone crushers. : Ballmills, pumps, VRM 3

5 IGLOO X set VS LOW TEMPERATURE IGLOO XS Product : s: Z, A, B, C, SPZ, SPA, SPB, SPC, 3V, 5V, 8V IGLOO HXS BANDED Product : s: HZ, HA, HB, HC, HSPZ, HSPA, HSPB, HSPC, H3V, H5V, H8V Excellent performance while operating in extremely low ambient temperatures of up to 45ºC Temperature range: 45ºC to +80ºC Longer service life Improved crack resistance properties to ensure smooth operation in low temperature applications Application: Cooling tunnels, cold storage for conveying purpose, low ambient temperature drives etc. GreenPower XS (Nonstandard sizes) x11 15x9 19x11 21x9 x16 x12 33x 38x23 x20 68x24 VARIABLE SPEED (Reference Standards: ISO 3410:1989 / BS 3733: 1974) 17x8 25x / HI 32x15 / HJ 38x18 / HK 45x20 / HL 51x20 / HM 55x 60x25 HALOGEN FREE Trouble free and efficient performance without any harmful emissions Ecofriendly Belts REACH and RoHS compliant Smoothrunning operation Halogenfree Helps maintain pollution free environment Temperature range: 18ºC to +80ºC Product : All Classical, Wedge & Narrow Belts (Degrees) Excellent transverse rigidity and flexibility to prevent bucking at minimum diameter settings where Belt stress is more Firm gripping action in the contact areas; provide positive traction for precise, immediate response Higher power transmission than regular Belts Longer servicelife Facilitates smooth running without excessive vibrations Specific Beltdesign for maximum longitudinal flexibility Temperature range: 18ºC to +80ºC Application: Variable speed pulley drives requiring exact speed control and maximum range of speed changes. They are ideal for recreational equipment, agricultural applications and machine tools. 4 WRAP RAW EDGE COGED RIBBED / POLY V TIMING

6 WRAP RAW EDGE COGED RIBBED / POLY V TIMING HARVESTER AGRICULTURAL HARVESTER HARVESTER B (17x11) 19x11 20x12.5 x11 C (x14) x16 25x16 25x x12 32x15 38x18 x20 45x20 50x20 55x 60x25 68x HARVESTER AGF FLAT 70Fx4 80Fx4 Fx6 50Fx6 75Fx6 80Fx6 95Fx6 100Fx6 114Fx6 120Fx6 125Fx6 127Fx6 5Fx6 1Fx6 150Fx Note: Intermediate sizes are available upon request. Specially designed for application with outside idlers Highly flexible, suitable for small pulley diameters Higher power transmission than regular Belts Excellent performance under variable load conditions Temperature range: 18ºC to +80ºC (Degree) " 41.6" 31.4" 62" 31" 68" 57" 42.5" 37.4" 43.7" 56 68" 60" 71" 72" 73" 100" 68" 68" 110" 39" 106" 77" 106" 85" 106" 106" 68" 106" 106" 106" 106" 155" 354" 258" 354" 0" 3" 358" 259" 345" 374" 259" 259" 356" 252" 252" 80" 352" 3" 315" 352" 317" 317" 252" 317" " 317" Designation DUO DOUBLE SIDED AA BB CC 25 DD Duo XS HEXAGONAL (Degree) Pulley Dia " " 73" 88" " Designation NCC DUO XSN WRAP DOUBLE SIDED NOTCHED Absolutely flexible Transmit power from both the sides This special construction allows Belt to be used in serpentinedrive" system, such as rice mills, textile mills Temperature range: 18ºC to +80ºC

7 ENFORCER XS B C wnmaster XS 16.7mm mm RICE HARVESTER Higher power transmission capacity in comparison to regular belts Good mechanical strength Lowest elongation and slippage sser belt deformation, longer service life Reduced number of belts Antistatic, oil and heat resistant Suitable for applications comprising of high shock loads which is caused due to sudden start / stop of the machine Temperature range: 25 C to +100 C Application: Rice harvesters VALIANT XS B C 16.7mm mm 9.65mm 11.0mm Mfg LAWN MOWER (Degree) 3L L L Note: Intermediate sizes and OEM parts are available upon request. High tensile strength, nonextensibility, high resistance to shock loads High resistance to wear and tear, reduced slippage while clutching Able to withstand high level of reverse flexing High resistance to oil, heat and cracking Temperature range: 18ºC to +80ºC Application: wn & garden machinery RICE HARVESTER 9.65mm 11.0mm Mfg Higher power transmission capacity in comparison to regular belts Good mechanical strength Crack & damage free in high temperature applications Antistatic, oil and heat resistant Suitable for applications where reverse idlers have to be used Extended temperature range: 25 C to +100 C Application: Rice harvesters WRAP RAW EDGE COGED RIBBED / POLY V TIMING DryCover DRY COVER DryCover XS Product : s: A, B, C, D, SPZ, SPA, SPB, SPC, 3V, 5V, 8V, 3L, 4L, 5L DryCover HXS BANDED Product : s: HA, HB, HC, HD, HSPZ, HSPA, HSPB, HSPC, H3V, H5V, H8V Suitable for drives having clutch applications Designed for applications where contamination is not accepted Available in polyester and Kevlarcord constructions Available in different colours blue, green, brown, red, black & white Temperature range: 18ºC to +80ºC : Entire range of wrapped Belts (Classical, Wedge, Narrow & ght Duty) Single, Banded and Varispeed Application: Chemical, pharmaceuticals, food industry etc 6

8 WRAP RAW EDGE COGED X tra RAW EDGE COGGED CLASSICAL SECTION ZX AX BX CX DX WEDGE SECTION XPZ 8.0 XPA XPB 14.0 XPC 18.0 (Degree) 38 Standard IS 2494, BS 3790, ISO 4184 IS 2494, BS 3790, ISO 4184 IS 2494, BS 3790, ISO 4184 IS 2494, BS 3790, ISO 4184 IS 2494, BS 3790, ISO 4184 BS 3790 BS 3790 BS 3790 BS 3790 Pulley Dia mm 600 mm 600 mm 600 mm mm 5100 mm 5100 mm 5100 mm Belt Factor to to to RIBBED / POLY V TIMING NARROW SECTION 3VX VX VX LIGHT DUTY SINGLE V 2LX LX LX LX RMA IP RMA IP RMA IP RMA IP 23 RMA IP 23 RMA IP 23 RMA IP 23 Oil resistant & antistatic Maximum Belt linear speed (Classical section: up to m/sec, Wedge: up to 42 m/sec, Narrow: up to 45 m/sec) Higher power transmission capacity than Wrapped Belts Superior transverse stiffness & high wear resistance Suitable for drives with small pulley diameters, high ambient temperature & speed Temperature range: 25ºC to +100ºC ATEX certified FRAS Belts are also available Application: General engineering, all industrial Belts drives " " 118" 118" 118" Note: These sizes are indicative & denote minimum & maximum range. Intermediate sizes are available upon request. DuraBand XR HAX HBX HCX HXPZ HXPA HXPB HXPC H3VX H5VX BANDED (Degree) 7 Pitch (Reference Standards: ISO 5290, ISO 5291, BS 3790) 600 mm 600 mm 600 mm 600 mm 5080 mm 5080 mm 5080 mm 5080 mm Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes please contact us at info@pixtrans.com. Enhanced power transmission capacity up to 25% sser number of Belts required as compared to multiple singlebelt drive High adhesion strength between tie band and the Belts Eliminates chances of mismatch in length as observed in multiple singlebelt drive Antistatic, oil and heat resistant ATEX certified FRAS Belts are also available Temperature range: 25ºC to +100ºC Manufactured through singlestagecuring process Application: Best suited for drives with severe vibrations, vertical shaft drives, Vflat drives, agricultural drives, stone crushers, heavy duty compressors, generator sets, pumps, cold forging machines & mining equipment.

9 ATEX Certified MUSCLE XR3 XPZ XPA XPB XPC 3VX 5VX HIGH POWER, MAINTENANCEFREE Exceptionally high power rating up to % more than conventional standard Vbelt High transmission efficiency up to 98% providing optimum output Maintenance free property of the belt ensures less machine downtime and an extended service life Complies with ISO 18 having antistatic property Temperature range from 35 C to +1 C allows the belt to perform even at increasing ambient temperatures Space saving potential sser number of belts required REACH & RoHS compliant provides an ecofriendly system High dimensional stability offering the best wedging effect between the belt and the pulley flanges Increased performance due to the engineered belt design Smooth running operation Minimal belt tension loss Application: Wire rope manufacturing industry, steel industry, power plants, textile industry, pharmaceutical Industry, food processing units FRAS XR FIRE RESISTANT ANTISTATIC Product : s: ZX, AX, BX, CX, XPZ, XPA, XPB, XPC, 3VX, 5VX, 8VX Conforms to: II 2GD c IIB X (Test report no. IB034934) ATEX Temperature range: 25 C to +100 C Ensures high level of protection against fire hazards Fire resistance test results of flame & glow time period is lower than the desired 5 seconds, maximum time as per BS 3790 standard ATEX values for electrical resistance are approximately 1015 times more stringent than ISO 18, leading to a more safer drive Resistance to emit inflammable substances while in operation Damage free and crack resistance properties to ensure smooth operation Longer service life Dimensional stability Antistatic, oil and heat resistant Applications: Coal mines, fire prone areas, petrochemical installations etc. DUO DOUBLE SIDED Duo XV 85.0 Mfg DOUBLE COG VARIABLE SPEED Designation (Degree) to.0 to Pulley Dia WRAP RAW EDGE COGED RIBBED / POLY V TIMING AAX BBX Duo XR HEXAGONAL DOUBLE COG 14.0 º º Absolutely flexible Transmit power from both sides This special construction allows belt to be used in Serpentinedrive" system e.g. rice mills Temperature range: 25ºC to +100ºC RAW EDGE PLAIN & LAMINATED X tra XP RAW EDGE PLAIN X tra XL RAW EDGE LAMINATED Standards, Dimensions & Product range: Same as Raw Edge Cogged Belts, given on page no. 7 8

10 WRAP RAW EDGE COGED X tra XV VARIABLE SPEED (Reference Standards: RMA IP 25/1991) VA/14V VA/19V 37VA/23V VA/19V 46VA/29V 51VA/32V VA/25V 51VA/32V 70VA/44V 64VA/V 70VA/44V 76VA/48V (Degree) Pitch Belt Factor to to to RIBBED / POLY V (Reference Standards: ISO 3410:1989 (E) / ASAE S2114) HG HH HI HJ HK HL HM HN HO TIMING Nonstandard sections 0 to to.00 to Note: Raw Edge Plain & Raw Edge minted Belts can be made on request. These sizes are indicative & denote minimum & maximum range. For intermediate sizes please contact us at info@pixtrans.com. Excellent transverse rigidity and flexibility to prevent bucking at minimum diameter settings where Belt stress is more Firmgrippingaction in the contact areas provide positive traction for precise, immediate response Higher power transmission than regular Belts Longer servicelife Facilitates smooth running without excessive vibrations Specific Beltdesign for maximum longitudinal flexibility Temperature range: 25ºC to +100ºC Application: Variable speed pulley drives requiring exact speed control and maximum range of speed changes. They are suitable for recreational equipment, agricultural applications and machine tools. HARVESTER XV AGRICULTURAL Product : s: VA/14V, VA/19V, 37VA/23V, VA/19V, 46VA/29V, 51VA/32V, VA/25V, 51VA/32V, 70VA/44V, 64VA/V, 70VA/44V, 76VA/48V, HG, HH, HI, HJ, HK, HL, HM, HN, HO Specially designed for application with outside idlers More flexible, suitable for small pulley diameters Higher power transmission than regular Belts Excellent performance under variable load conditions Temperature range: 25ºC to +100ºC WhiteKnight SNOWMOBILE Excellent performance under high horsepower load Kevlarcord construction for longer life Can withstand temperature up to ºC to +100ºC Reduced slippage Available in single side & double side cog profile Product range: HD / HDX / XDX Series 9

11 ASYMMETRA ASYMMETRIC PowerTex XV2 á TEXTILE MACHINERY X62xIK1745 X70xIK1700 X70xIK1800 X70xIK1810 Note: Other sizes are available on request. 2 2 Designation â Designed to meet high power transmission requirement for textile spinning mills of up to 60 kw Developed for spinning mills to operate at spindle with very high speed of up to RPM Higher power transmission capacity Excellent performance & customer satisfaction by giving energy saving solutions in textile spinning application Temperature range: 25ºC to +100ºC Torque converter systems High lateralrigidity & tough Longer life Excellent shock absorbing capacity Temperature range: 25ºC to +100ºC Application: Golfcart, snowmobiles, minibikes, material handling & industrial equipment TITAN XR BX CX RICE HARVESTER mm mm 11.0mm 14.0mm Mfg Higher power transmission capacity in comparison to regular belts High efficiency up to 98% Suitable for heavy duty, high speed applications Maintenance free Extended service life & less machine downtime Antistatic, complies with ISO 18 Oil and heat resistant Drives with very small pulley diameters Temperature range: 25 C to +1 C Application: Rice harvesters WRAP RAW EDGE COGED RIBBED / POLY V TIMING DOMINATOR XR RICE HARVESTER BX CX 16.5mm mm mm 11.0mm Mfg. Extremely high power transmission capacity Highest tensile strength Lowest elongation and slippage Suitable for higher speeds Drives with very small pulley diameters Better performance in applications comprising of high shock loads Greater lateral rigidity & longitudinal flexibility Antistatic, oil and heat resistant Temperature range: 25 C to +100 C Application: Rice harvesters

12 WRAP RAW EDGE COGED RIBBED / POLY V TIMING ATEX Certified X ceed RIBBED / POLY V (Reference Standards: RMA IP, ISO ) Rib Pitch No. of Ribs Pulley Dia. Possible PH PJ PK PL PM to to to to to Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes please contact us at info@pixtrans.com. Oil resistant & antistatic High power transmission capacity Temperature range: 25ºC to +100ºC Maximum Belt linear speed up to 50 m/sec Highly flexible, noise free & smooth running Can be used for speed ratios up to 1: ATEX certified FRAS Belts are also available Application: Compact drives with high speed ratios, drives requiring minimum maintenance, drives in a noise sensitive environment, for serpentine drives and drives with reverse bend idlers like household appliances, work tools, machine tools etc. FRAS XC THERMAL XC DUO XC Product : s: PJ, PK, PL HIGH TEMPERATURE Temperature range: 35ºC to +1ºC High temperature resistant Longer service life Crack & damage free in high temperature applications DOUBLE SIDED Product : s: DPK: 2 to ribs DPL: 2 to 11 ribs FIRE RESISTANT ANTISTATIC Product : s: PJ, PK, PL, PM Fire resistant, antistatic, electrical resistance values are most stringent than ISO 18, fulfills requirement according to pren 4645:2003 & ISO 9563:1990, ATEX certified Temperature range: 25ºC to +100ºC Applications: Coal mines, fire prone areas, petrochemical installations etc. : DPK : 1195 mm to 3105 mm DPL : 1200 mm to 3105 mm Temperature range: 25ºC to +100ºC Note: Besides 11 ribs, DPL section Belt can be provided with ribs for the range 1500 mm to 00 mm Application: High speed engines, serpentine drives, textile machineries etc. ELASTO XC ELASTICATED RIBBED / POLY V : EL PJ : 2 to 20 ribs : 280mm to mm Belt with elastic properties Temperature range: 25ºC to +100ºC Application: Washing machine & dryers. 11

13 Shore hardness: 45 (Red Colour) Shore hardness: 50 (Coral Colour) Coat XC PACKAGING MACHINERY Profile top rubber, specific to applications Facilitates excellent cushioning coupled with extra elasticity Excellent flexibility to prevent cracks or tearing Optimum friction suitable for providing proper support to contact material Vulcanized as a single piece to ensure excellent adhesion Abrasion resistant Longer life profile thickness: 1.5mm, 3mm, 6mm, 8mm & 10mm Temperature : 18ºC to +80ºC Product : s: PJ: up to ribs PK: up to 24 ribs PL: up to 18 ribs : PJ : 700 mm to 2000 mm PK : 700 mm to 2000 mm PL : 700 mm to 2000 mm Application: FFS (Formfill & seal) machine, bakery, paper & printing, soaps & cosmetics, cabledrawing, plastic tube drawing, bottling plants etc Note: 1. Belt selection should strictly be done on the basis of temperature, top coat hardness & application 2. Availability of a particular size in product range to be cross checked before placing the order X act TIMING / SYNCHRONOUS X act CT CLASSICAL TIMING Tooth Belt Belt label description: Pitch Height 270 XL XL 025 MXL MXL to 1771MXL XXL Pitch Belt XXL to 219XXL (Tooth pitch XL XL to 2128XL mm) 0.25 L L to 2700L Maximum sleeve width is available up to 450 mm H H to 2720H XH XXH XH to 75XH 625XXH to 2000XXH (Standard: BS 4548, ISO 150, ISO 5296, DIN 7721) X act STD STD TIMING Belt label description: S 2M STD S 2M 60 to STD S 2M 3700 STD 150 S 5M 650 S 3M STD S 3M 120 to STD S 3M 6510 STD 150 S 5M 650 S 5M STD S 5M 150 to STD S 5M 00 Belt Pitch S 8M STD S 8M 376 to STD S 8M 66 (Tooth pitch 15 mm 5.0 mm) 650 mm S 14M STD S 14M 714 to STD S 14M 5012 Maximum sleeve width is available up to (Standard: BS 4548, ISO 150, 5296, DIN 7721) 450 mm X act HTD HTD TIMING Belt label description: 2M M to 750 2M 3M M to M 800 8M 5M M to M 800 8M 8M M to M Pitch Belt (Tooth pitch 14M M to M 800 mm 8.0 mm) mm (Standard: BS 4548, ISO 150, 5296, DIN 7721) Maximum sleeve width is available up to 450 mm High efficiency due to positive engagement between Belt teeth and pulley grooves Maintenancefree, no retensioning & high tension required Fibre glass cord provides strength, excellent flex life & high resistance to elongation Exact power transmission Low noise level & longer service life Improved stress distribution Temperature range: 25ºC to +80ºC Application: Suitable for drives demanding exact power transmission such as robotic machines, textile machinery, CNC machines, electronic equipment such as printers, scanners, currency counting machines etc. Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes please contact us at info@pixtrans.com. 12 WRAP RAW EDGE COGED RIBBED / POLY V TIMING

14 WRAP RAW EDGE COGED RIBBED / POLY V TIMING DUO XT DAXL DAL DAH DA3M DA5M DA8M DA14M DAS5M DAS8M Pitch DOUBLE SIDED TIMING Tooth Height Belt Power transmission from both sides Highly flexible Free from maintenance Extended stability, durability, strength and life Temperature range: 25ºC to +80ºC 200 DAXL to 580 DAXL 187 DAL to 660 DAL 200 DAH to 2720 DAH 501 DA3M to 11 DA3M 0 DA5M to 2050 DA5M 512 DA8M to 40 DA8M 10 DA14M to 6860 DA14M 410 DAS5M to 1420 DAS5M 512 DAS8M to 66 DAS8M Application: For serpentine drives like in textile, paper packaging & printing industries, handheld power tools, postage handling, food processors, office equipment, money handling, medical diagnostic, ticket dispensers, robotics, vending machines and vacuum cleaners. Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes, please contact us at info@pixtrans.com. X pedient XT T5 AT5 T10 AT10 Pitch Tooth Height POLYURETHANE Belt T5120 to T51955 AT55 to AT52000 T10250 to T1033 AT10250 to AT Note: These sizes are indicative & denote minimum & maximum range. For Intermediate sizes please contact us at info@pixtrans.com Polyurethane timing Belts are highly flexible with longitudinal toughness to ensure perfect tooth meshing No dustgeneration or flaking while running clean Belt Homogeneous throughout its crosssection by virtue of thermoset moulding process Superior wear and abrasion resistance High resistance to oil, fat and grease Excellent resistance to ageing, hydrolysis, UV and ozone Low vibration and reduced noise level Good resistance to most acids and alkalis Operating temperature range: ºC to +80ºC (up to +110ºC for a short period) Application: Office automation equipment and vending machines, machine tools and pumps, textile machines, paper making machines and printing machinery, medical equipment, optical instruments, food processing equipment, packaging machinery, robotics and plotters. BRUTE XT HIGH POWER 5M 8M 14M S5M S8M Pitch Tooth Height Belt M to 50 5M 424 8M to 40 8M M to M S5M 375 to S5M 2525 S8M 376 to S8M 2848 Enhanced power rating up to 50% more than regular Timing Belts High performance Belts for higher loads & high speeds drives Quiet performance Highly flexible and provides dimensional stability Increased operational efficiency and Belt life Compact, lower operational costs Maintenancefree Temp. : 25ºC to +100ºC Application: Food processing, packaging, paper machines, printing machines, robotic equipment, conveyors, office equipment, medical equipment.

15 Shore hardness: 55 (Magenta Colour) Shore hardness: 70 (Black Colour) Coat XT PACKAGING MACHINERY Profile top rubber, specific to applications Excellent cushioning coupled with extra elasticity Excellent flexibility prevents cracking or tearing Optimum friction suitable for providing proper support to contact material Vulcanized as a single piece to ensure excellent adhesion Belts are designed with abrasion resistance properties Longer life Temperature : 18ºC to +80ºC Product : L, H & 14M sections : L : 5 mm to 2000 mm, H : 5 mm to 2000 mm & 14M : 966 mm to 1960 mm Application: FFS (Formfill & seal) machine, bakery, paper & printing, soaps & cosmetics, cabledrawing, plastic tube drawing, bottling plants etc. s: L & H Profile Min Max Note: 1. Belt selection should strictly be done on the basis of temperature, top coat hardness & application. 2. Availability of particular size in product range to be cross checked before placing an order BRAWN XT Combines the advantages of Synchronous and Poly VBelts Transverse teeth for positive engagement on one side and longitudinal ribs for nonsynchronous frictional transmission on other side. Suitable for multishaft transmission with reversed rotary directions of pulleys Antistatic, oil and heat resistant Noisefree transmission Operating temperature range 25ºC to +100ºC Standard: PIX Proprietary POLY+TIMING Reference standards: RMA / MPTA IP, BS 4548, ISO 150 Application: Flour & rice mills, foodgrain industries WRAP RAW EDGE COGED RIBBED / POLY V TIMING : 8M & S8M timing sizes with PK & PL Poly section. Other sizes are available on request. VANQUISH HEAVY EARTHMOVING MACHINERY High modulus and stabilised stiff polyester cord Polychloroprene based compound for antistatic properties Fibre reinforced based compound for improved transverse stiffness Oil and heat resistant, capable to withstand high ambient temperature Recommended to be used on small pulley diameter and high speed Capable to perform in extremely dusty environment Capable to withstand shock loads, normally encountered in heavy duty applications Also available in Kevlarcord construction Product : Wrap Construction Belts: SPZ, SPA, SPB, SPC, 3V, 5V, 8V, Raw Edge Cogged Belts: XPZ, XPA, XPB, XPC, 3VX, 5VX, MX, TX, ZX, AX, BX, CX, X11A, XA, X15A, X17A, X20A, X23A, AVX10, AVX Ribbed / Poly VBelts: PK Available in Kevlarand maintenancefree cord constructions on request Application: Bulldozers, military engineering vehicles, excavators, backhoe loaders, harvester, construction & mining trucks, loaders, forklift trucks, underground mining equipment, dump trucks etc. 14

16 WRAP RAW EDGE COGED RIBBED / POLY V TIMING 9.5 / AV / AV WRAP FORCE (Degree) Excellent performance Abrasion resistant and offers smooth running Made up of high tensile polyester cord which enables maximum power transmission ss deformation Minimum elongation Temperature range: 18ºC to +80ºC Conforms to BS AU 150b, SAE J 6, JASO E 107 FORCE RAW EDGE COGGED X9.5 / AVX10 X12.5 / AVX X10A X11A XA X15A X17A X20A FORCE TIMING FORCE RIBBED ZA ZB ZH PR PRM PRP YU Pitch Tooth Height (Degree) 38 Belt Designation Rib Pitch Pulley Dia. Designation PK * Available in high temperature EPDM construction also Trapezoid faced ribs on a fibre reinforced rubber matrix for higher power transmission offering good resistance to wear and tear, facilitating quiet running Reduced vibrations, shock absorber, low stretch and an excellent behaviour under heavy load conditions Extremely flexible, capable to work on small pulley diameters and serpentine drives Oil and heat resistant, longer service life, suitable for HEMM applications Conforms to ISO 9981, 9982, RMA IP standards Temperature range: 25ºC to +100ºC * Available in high temperature HSN construction also. Trapezoidal tooth design for sections ZA, ZB and curvilinear tooth design for other sections Precisely formed and accurately spaced teeth ensure smooth engagement with pulley grooves Fibre glass tensile cords provide strength, excellent flex life and high resistance to elongation Durable backing protects against environmental pollution and friction wear Tough nylon surface protects the tooth surface Conforms to ISO 9010 / JASO E 105 Temperature range: 25ºC to +100ºC Designation * Available in high temperature EPDM construction also Best suited for nextgeneration high speed engines Cogged profile offers higher flexibility Offers higher power transmission on smaller pulley diameters Engineered and chemically treated modulus & low stretch tensile cords for higher loads without stretch Compounded for better grip and lateral rigidity Excellent resistant to oil and heat Suitable for HEMM (Heavy earthmoving machinery) applications Conforms to BS AU 150b, SAE J 6, JASO E 107 Temperature range: 25ºC to +100ºC 88 ZA, 104 ZA, 111 ZA 7 ZB 89 ZH, 97 ZH, 129 ZH, 8 ZH, 153 ZH 1 PR 97 PRM, 123 PRM, 124 PRM 177 PRP, 185 PRP 101 YU, 106 YU, 107 YU, 109 YU, 115 YU

17 DIGITAL TENSION METER PIX Digital version of tension meter is used to correct the tension factor in a drive, thus helping the users' to attain the optimum Belt tension. This equipment works on frequency measurement phenomenon. PULLEY GAUGES PIX Pulley Gauges are specially designed for checking the profiles of the grooves of various conventional and dual section pulleys. LASER GUIDED PULLEY ALIGNMENT INSTRUMENT Robust and highly effective maintenance tool, used to correct the misalignment of pulleys in a drive, to help the user to obtain the maximum service life of the Belt. ANALOG TENSION TESTER Manual tool meant for correcting or retensioning the drive with adequate reliability. BELT PROFILE GAUGE Used for checking the Belt profile, angle for Wrapped Belts of all the sections. LENGTH MEASURE Used for checking the length where size on the Belt is not clearly visible. Available in conventional, dual and flat pulley constructions. WRAP RAW EDGE COGED RIBBED / POLY V TIMING DRIVE DESIGN SOFTWARE Software for designing the drive / drive solutions for Wrap, Raw edge cogged Belts, Poly VBelts & Timing Belts KIT Belt display kit for sales team. Comprises of 14 Belts of various types. Features Belts for various application based on the requirement. MAINTENANCE CHART BELT STAND Tabletop metallic Belt display rack, can hold up to 60 Belts. Dimensions : 1200 (l)x450(b)x500(h) 16 Comprises of maintenance tips which helps in maintaining healthy condition of the drive.

18 WRAP WRAPPED / RAW EDGE COGGED RAW EDGE COGED 8 5 Z / ZX 6 A / AX 8 32 B / BX C / CX D / DX RIBBED / POLY V CLASSICAL SECTION 10 SPZ / XPZ 8 SPA / XPA SPB / XPB SPC / XPC E V / 3VX V / 5VX V / 8VX 23 TIMING WEDGE SECTION 10 NARROW SECTION HZ HA / HAX 19.0 HB / HBX 25.5 HC / HCX 37.0 HD HSPZ / HXPZ HSPA / HXPA HSPB / HXPB HSPC / HXPC BANDED H3V / H3VX H5V / H5VX H8V 25 LIGHT DUTY / LAWNMASTER LX 3L / 3LX 4L / 4LX 5L / 5LX 17

19 HEXAGONAL TIMING : CLASSICAL SECTION AA MXL XL H BB 14 DD CC XXL L 25.5 XH RIBBED / POLY V STD SECTION PH PJ 2.00 S 2M 5.00 S 5M DAXL 3.56 PK S 14M S 3M 8.00 S 8M PL DOUBLE SIDED TIMING DAL 9.4 PM WRAP RAW EDGE COGED RIBBED / POLY V TIMING HTD SECTION M SECTION XXH M SECTION DAH 5.00 DA5M DA3M 8.00 DA8M M SECTION M SECTION DA14M DAS 5M M SECTION DAS 8M

20 PIX Belt Catalogue / Oct 2015 / 2000