Transcription

1 V-Belts Super HC Molded Notch PowerBand V-Belts by Gates The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Construction Wrapped construction. Polychloroprene compound. Flex-Weave cover provides greater flexibility. Flex-Bonded tensile cords. Static conductive to ISO 1813 or RMA IP Non-self igniting. Concave sidewalls straighten out in the pulley grooves to give full grip and better contact with the sides of the pulleys. Arched top prevents dishing and distortion of the tensile section, thus uniformly distributing the tension on the cords. Features/Advantages Meets RMA oil and heat resistant standards and static conductivity standards. The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive. Notches molded into the belt during manufacturing make this belt well suited for drives with smaller diameter sheaves. Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and absorbtion of bending stress without cord deterioration. Markets/Applications Recommended for multiple V-belt drives exposed to pulsating or heavy shock loads which can make belts whip, turn over or jump off the drive. Product No. Series VX Section 3VX PowerBand Belts are available up to 22 strands. Belts in stock at Bob Dean Supply, Inc. are single strand unless otherwise noted. Size Belt O.C. Lbs. Per Strand Part No. 3VX VX VX VX B0613 3VX B0614 3VX B0615 3VX B0616 3VX B0617 3VX B0618 3VX B0619 3VX B0620 Size Belt O.C. Lbs. Per Strand Part No. 3VX B0621 3VX B0622 3VX B0623 3VX B0624 3VX B0625 3VX B0626 3VX B0627 3VX B0628 3VX B0629 3VX B0630 3VX B0631 Size Belt O.C. Lbs. Per Strand Part No. 3VX B0632 3VX B0633 3VX B0634 3VX B0635 3VX B0636 3VX B0637 3VX B0638 3VX B0640 3VX B0641 Product No. Series VX Section 5VX PowerBand Belts are available up to 13 strands. Belts in stock at Bob Dean Supply, Inc. are single strand unless otherwise noted. Size Belt O.C. Lbs. Per Strand Part No. 5VX450 B0662 5VX B0642 5VX B0643 5VX B0644 5VX580 B0677 5VX590 B0676 5VX B0685 5VX B0645 5VX650 B0660 5VX B0647 5VX690 5VX B0646 5VX B0648 5VX B0649 5VX B0650 Size Belt O.C. Lbs. Per Strand Part No. 5VX B0651 5VX B0652 5VX B0653 5VX B0654 5VX B0655 5VX B0656 5VX B0657 5VX B0658 5VX B0659 5VX B0672 5VX B0661 5VX VX B0663 5VX B0664 5VX

2 V-Belts Product No. Series V Section 8V PowerBand Belts are available up to 11 strands. Belts in stock at Bob Dean Supply, Inc. are single strand unless noted. Size Belt O.C. Lbs. Per Strand Part No. 8V B0692 8V V V V V V B0696 8V V V V V Size Belt O.C. Lbs. Per Strand Part No. 8V B0690 8V B0697 8V B0695 8V V B0694 8V B0702 8V V V V V B0698 8V B0700 Size Belt O.C. Lbs. Per Strand Part No. 8V B0701 8V B0704 8V V V V V Hi-Power II V-Belts by Gates The classical section V-belt, that performs better than any other classical belt on heavy-duty industrial drives. Featuring a composite, multi-purpose construction, these belts resist oil and heat, ozone, sunlight, weather, and aging. Features/Advantages Gates Curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear, and increased belt life. Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. The Flex-Weave Cover is a patented fabric construction for longer cover life, providing extended proptection to the belt core from oil, dirt and heat. Meets RMA oil and heat resistant standards. Meets RMA static conductivity requirements. Construction Wrapped construction. Rounded bottom corners relieve internal stress and offer high resistance to corner wear. Flex-Weave polychloroprene impregated cover provides greater flexibility. Flex-Bonded tensile cords. Static conductive to RMA IP Non-self igniting. Concave sidewalls straighten out to the exact shape of the groove, ensuring uniform contact. Arched top prevents dishing and distortion of the tensile section, uniformly distributing the tension on the cords. Markets/Applications Suitable for all industrial applications, including v-flat drives. Identification Durable orange marking indicating type and dimensions. Note Gates Hi-Power belts are available in A, B, C, D and E cross sections. 193

3 V-Belts Hi-Power II V-Belts by Gates (continued) Product No. Series A Section A Lbs B0001 A A B0002 A B0083 A B0084 A B0003 A A B0085 A B0004 A B0005 A B0006 A B0007 A B0008 A B0009 A B0010 A B0011 A B0012 A B0086 A B0013 A B0014 A B0015 A B0016 A B0017 A B0018 A B0019 A B0020 A Lbs B0021 A B0022 A B0023 A B0024 A B0025 A B0026 A B0027 A B0028 A B0029 A B0030 A B0031 A B0032 A B0033 A B0034 A B0035 A B0036 A B0037 A B0038 A B0039 A B0040 A B0041 A B0042 A B0043 A B0044 A B0045 A B0046 A Lbs B0047 A B0048 A B0049 A B0050 A B0051 A B0052 A B0053 A B0054 A B0055 A B0056 A B0057 A B0058 A B0059 A B0060 A B0061 A B0062 A B0063 A B0064 A B0065 A B0066 A B0067 A B0068 A B0069 A B0070 A A B0071 A Lbs - A A B0072 A A B0073 A A A A B0074 A B0075 A A A Lbs - A A A A B0076 A A A B0077 A A A A A Lbs B0078 A A B0079 A A A A A A A B0081 A B0082 A

4 V-Belts Product No. Series B Section B Lbs B0164 B B B0366 B B B0215 B B B0217 B B0177 B B0087 B B B0088 B B0175 B B0089 B B0090 B B0091 B B0092 B B0093 B B0094 B B0095 B B0096 B B0097 B B0098 B B0099 B B0100 B B0101 B B0102 B B0103 B B0104 B B0106 B B0107 B B0108 B B0109 B B0110 B B0111 B B0112 B B0113 B B0114 B B0115 B B0116 B B0117 B B0118 B B0119 B B0120 B B0121 B B0122 B B0123 B B0124 B B0125 B B0126 B B0127 B B0128 B B0129 B B0130 B B0131 B B0132 B B0133 B B0134 B B0135 B B0136 B B0137 B B0138 B B0139 B B0140 B B0141 B B0142 B B0143 B B0144 B B0145 B B0146 B B0147 B B0148 B B0149 B B0150 B B0151 B B0152 B B B B B B B0153 B B B B B0154 B B B B0225 B B0155 B B B0229 B B B0156 B B B B0157 B B B B B0158 B B B B B0159 B B B B0160 B B B B B0161 B B B B B0162 B B B B B B B0163 B B B B B0226 B B B B0165 B B B B0166 B B B B B B B B B B B B B0168 B B B B B B B

5 V-Belts Hi-Power II V-Belts by Gates (continued) Product No. Series B Section (continued) B B B0169 B B B B B B B0170 B B B B B B B B0171 B B B B B B B0172 B B B0173 B B B0174 B B B B B B B B B B B B B Product No. Series C Section C Lbs - C C C C C B0179 C C C C B0223 C C C C C B0180 C C C C C C C C B0181 C C C C B0182 C C C B0183 C C C C C B0184 C C C C B0185 C C B0178 C C B0186 C C C C C C B0187 C C C C B0188 C C C C C B0189 C C C C B0190 C C C B0191 C C B0192 C C C C B0193 C C C C B0194 C C C C C C B0195 C C C C C C C C B0196 C C C C B0197 C C C C

6 V-Belts Product No. Series C Section (continued) C C C B0198 C C B0199 C C C C C C C B0200 C C C B0201 C C C C C C B0202 C C C C C C B0203 C C C C C B0204 C C C C B0205 C C C C B0206 C C B0207 C C C C C C C B0209 C C C B0211 C C B0213 C B0218 C B0214 Product No. Series D Section D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D D E E E E E E E E E E E E E E Fort Myers Branch Clewiston Branch 2624 Hanson Street 1310 Evercane Road Fort Myers, FL Clewiston, FL (800) (800) (239) (863) (239) Fax (863) Fax sales@bobdeansupply.com sales@bobdeansupply.com Check item availability and make secure online purchases with Bob Dean Supply s ecatalog at 197

7 V-Belts Hi-Power II PowerBand V-Belts by Gates The PowerBand construction allows multiple belts to function as a single unit, with even load distribution and each strand fitting securely in the sheave groove. Features/Advantages The Tie Band assures high lateral rigidity, guiding the belt in a straight line and preventing it from coming off the drive. Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and absorbtion of bending stress without cord deterioration. Concave Sidewalls provide proper cord support and full contact with the sheave-groove for equal loading and uniform wear. Reliability and efficiency. Meets RMA oil & heat resistant standards,static conductivity requirements. Construction Wrapped construction. Concave sidewalls straighten out to the exact shape of the groove, ensuring uniform contact. Rounded bottom corners relieve internal stress and offer high resistance to corner wear. Flex-Weave polychloroprene impregated cover provides greater flexibility. Flex-Bonded tensile cords. Static conductive to RMA IP Non-self igniting. Arched top prevents dishing and distortion of the tensile section, uniformly distributing the tension on the cords. Markets/Applications Recommended for drives where single belts vibrate, turn over or jump off the drive. Identification Durable orange marking indicating type and dimensions. Note Gates Hi-Power II PowerBand belts are available in A, B, C, and D cross sections. Product No. Series A Section A section PowerBand Belts are available up to 20 strands. A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A A

8 V-Belts Product No. Series B Section B section PowerBand Belts are available up to 16 strands. B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B B Fort Myers Branch Clewiston Branch 2624 Hanson Street 1310 Evercane Road Fort Myers, FL Clewiston, FL (800) (800) (239) (863) (239) Fax (863) Fax sales@bobdeansupply.com sales@bobdeansupply.com Check item availability and make secure online purchases with Bob Dean Supply s ecatalog at 199

9 V-Belts Hi-Power II PowerBand V-Belts by Gates (continued) Product No. Series C Section C section PowerBand Belts are available up to 12 strands. C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C C Product No. Series D Section D section PowerBand Belts are available up to 7 strands in sizes up to and including 180 ; Available up to 8 strands for belts longer than 180. D D D D D D D D D D D D D D D D D D D D D D D Fort Myers Branch Clewiston Branch 2624 Hanson Street 1310 Evercane Road Fort Myers, FL Clewiston, FL (800) (800) (239) (863) (239) Fax (863) Fax sales@bobdeansupply.com sales@bobdeansupply.com Check item availability and make secure online purchases with Bob Dean Supply s ecatalog at 200

10 V-Belts Tri-Power V-Belts by Gates Constructed with Gates proprietary construction, this belt has a superior combination of flex and load carrying capacity, as well as less stretch resulting in less maintenance. Features/Advantages Notched molded into the belt during manufacturing make this belt well suited for drives with smaller diameter sheaves. Belt Edge is machined for even sheave groove contact resulting in less slip and wear. Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorbtion of bending stress without cord deterioration. Meets RMA oil and heat resistant standards,static conductivity requirements. Markets/Applications Suitable for all industrial applications, particularly where small or subminimal sheave diameters are required. Note Tri-Power belts are available in AX, BX and CX sizes. Product No. Series AX Section AX AX AX AX AX AX B0255 AX B0245 AX B0246 AX B0247 AX B0249 AX B0250 AX B0251 AX B0252 AX B0254 AX B0253 AX AX B0257 AX B0256 AX AX AX AX B0259 AX B0260 AX B0261 AX B0262 AX B0263 AX B0272 AX B0273 AX B0275 AX B0265 AX B0266 AX B0276 AX B0277 AX B0279 AX B0280 AX AX B0281 AX B0282 AX B0283 AX B0270 AX B0284 AX B0286 AX B0293 AX B0271 AX AX AX AX AX AX AX AX AX AX B0274 AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX AX

11 V-Belts Tri-Power V-Belts by Gates (continued) Product No. Series BX Section BX BX BX BX BX B0278 BX BX BX BX BX BX B0291 BX B0356 BX B0357 BX B0358 BX B0292 BX B0359 BX B0360 BX B0361 BX B0287 BX B0338 BX B0290 BX B0289 BX B0294 BX B0318 BX B0285 BX B0319 BX B0288 BX B0320 BX B0296 BX B0321 BX B0325 BX B0295 BX B0298 BX B0326 BX B0328 BX B0297 Product No. Series CX Section Size Belt O.C. Lbs. Each CX CX CX CX CX CX CX CX CX CX CX CX BX B0301 BX B0300 BX B0299 BX B0329 BX B0302 BX B0330 BX B0304 BX B0331 BX B0305 BX B0307 BX B0332 BX B0306 BX B0333 BX B0334 BX B0335 BX B0310 BX B0303 BX B0308 BX B0309 BX B0311 BX B0313 BX B0312 BX B0315 BX B0314 BX B0316 BX B0317 BX B0342 BX B0343 BX B0344 BX B0345 BX B0322 BX B0323 BX BX BX BX Size Belt O.C. Lbs. Each CX CX CX CX CX CX CX CX CX CX CX CX BX BX BX BX BX BX B0324 BX BX BX BX BX BX BX BX BX B0327 BX BX BX BX BX BX BX BX BX BX BX BX BX BX BX BX BX BX Size Belt O.C. Lbs. Each CX CX CX CX CX CX CX CX CX CX CX CX CX

12 V-Belts Truflex Light Duty V-Belts by Gates Truflex gives optimum service on fractional horsepower V belt drives including back idler applications.truflex belts feature superior length stability for minimal take-up requirements. Features Gates curves provide proper cord support and full contact with the sheave-groove for uniform loading, uniform wear and increased belt life. Flex-Bonded Cords are strongly bonded to the body of the belt resulting in equal load distribution and the absorption of bending stress without cord deterioration. The Flex-Weave Cover is a patented construction for longer cover life, providing extended protection to the core of the belt from oil, dirt and heat. Meets RMA oil and heat resistant standards and RMA static conductivity requirements. Advantages Thanks to its thin profile, Truflex is recommended for smaller diameter drives. Ideal for back idler applications. Extremely flexible. Smooth, quiet operation. Economical drives. Superior length stability. Markets/Applications Suitable for all industrial light duty applications, usually using fractional horsepower (FHP) motors, such as powered cultivators, lawn mowers, electrical household appliances and HVAC equipment. Identification - Durable molded label indicating size and type. Note - Truflex belts are offered in cross sections 2L (0), 3L (1), 4L (2), 5L (3). Product No. Series or 2L Section Size Belt O.C. Lbs. Each 2L L L L L L L L L Size Belt O.C. Lbs. Each 2L L L L L L L L L Size Belt O.C. Lbs. Each 2L L L L L L L Fort Myers Branch Clewiston Branch 2624 Hanson Street 1310 Evercane Road Fort Myers, FL Clewiston, FL (800) (800) (239) (863) (239) Fax (863) Fax sales@bobdeansupply.com sales@bobdeansupply.com Check item availability and make secure online purchases with Bob Dean Supply s ecatalog at 203

13 V-Belts Truflex V-Belts by Gates (continued) Product No. Series OR 3L Section 3L B0395 3L L L L L B0396 3L L B0402 3L B0403 3L B0404 3L B0405 3L B0406 3L B0407 3L B0408 3L L B0409 3L L B0410 3L L B0411 3L L B0412 3L L B0413 3L L B0414 3L B0415 3L B0416 3L B0417 3L B0418 3L L B0419 3L B0420 3L B0421 3L B0422 3L B0423 3L B0424 3L B0425 3L L B0426 3L B0427 3L B0428 3L B0429 3L B0430 3L B0431 3L B0432 3L B0433 3L L B0435 3L B0436 3L B0437 3L B0438 3L B0439 3L B0440 3L L L B0443 3L L L L L L L L L L L L L L L Product No. Series OR 4L Section 4L L L B0448 4L B0449 4L L L B0451 4L B0452 4L L B0453 4L B0454 4L L B0455 4L B0457 4L L B0458 4L B0459 4L L B0460 4L L B L L B0462 4L B0463 4L L B0464 4L L B0465 4L L L B0466 4L L B0467 4L B0468 4L B0469 4L B0470 4L B0471 4L B0472 4L L B0473 4L B0474 4L B0475 4L B0476 4L B0477 4L B0478 4L B0479 4L L B0480 4L B0481 4L B0482 4L B0483 4L L B0485 4L B0486 4L B0487 4L B0488 4L B0489 4L L B0491 4L B0492 4L B0493 4L L B0495

14 V-Belts Product No. Series OR 4L Section (continued) 4L L L L B0499 4L L L B0502 4L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L Product No. Series OR 5L Section 5L L L L L L L L L L L L B0543 5L L L L B0546 5L L B0548 5L B0549 5L L B0551 5L B0552 5L B0553 5L B0554 5L B0555 5L B0556 5L B0557 5L B0558 5L B0559 5L L B0561 5L B0562 5L B0563 5L B0564 5L B0565 5L B0566 5L B0567 5L B0568 5L B0569 5L L L L B0573 5L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L L

15 V-Belts Predator Powerband V-Belts by Gates Specifically designed for aggressive applications, this extra heavy-duty belt construction provides extraordinary high impact strength, capacity, and wear resistance. This is the best belt on the market today for extra tough and high horsepower applications. Predator belts are well suited as replacement belts for applications exposed to pulsating loads or heavy shock loads, such as mining, agriculture, wood processing, oil field equipment, heavy construction and sand/ gravel operations. Features Aramid Tensile Cords combine limited stretch with extraordinary strength and durability that is pound-for-pound stronger than steel Bareback Cover resists debris and allows the belt to slip under extreme shock load conditions, reducing heat buildup and prolonging belt life Multiple layer Tie Band provides excellent lateral rigidity to prevent belts from turning over or from coming off the drive Gates Curves provide proper cord support and full contact with the sheave-groove for equal loading, uniform wear, and increased belt life Meets RMA oil and heat resistant standards Note - The part number is constructed by placing the number of strands required, followed by a slash ( / ) in front of the belt size. For example 5/8VP3000 represents an 8VP3000 with 5 strands. Product No. Series Section CP Product No. Series Section 5VP Product No. Series Section 8VP Model Belt O.C. Lbs. Each 3/CP /CP /CP Product No. Series Section 3VP Model Belt O.C. Lbs. Each 3VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP Model Belt O.C. Lbs. Each 5VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP Model Belt O.C. Lbs. Each 8VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP VP

16 V-Belt Selection V-Belt Selection Guide Super HC Super HC Molded Notch PowerBand Predator PowerBand Super HC PowerBand Poly Chain GT Carbon Long-Length Poly Chain GT 2 Belting Poly Chain GT Belts - 8M Short Length Poly Chain HTD Super HC Molded Notch Hi-Power II Hi-Power II PowerBand Tri-Power Poly Chain GT Belts - 5M PowerGrip GT 2 Belts - 8M and 14M PowerGrip GT 2 Twin Power Belts - 8M and 14M PowerGrip GT 2 Belts - 2MR and 3MR Truflex V-Belts Predator Single Hi-Power II Dubl-V Belts Metric Power V-Belts PowerGrip GT 2 Belts - 5MR PowerGrip GT 2 Twin Power - 3MR and 5MR Long-Length PowerGrip GT 2 Belting PowerGrip HTD Belts Power Curve PowerBack BladeRunner Round Endless Belts PowerGrip HTD Twin Power Belts Long-Length PowerGrip HTD Belting PowerGrip Timing Belts PowerGrip Twin Power Timing Belts Micro-V Belts PowerRated V-Belts Polyflex Belts Polyflex JB Belts Long-Length PowerGrip Timing Belts PowerGrip GT TruMotion Belts PowerGrip HTD TruMotion Belts PowerGrip Timing TruMotion Belts Multi-Speed Belts Tubewinder Belts Powercord Belts Speed Flex Belts Cotton Cleaner Belts Curve Saw Poly Chain GT 2 Belts Eliminator Belts Synchro-Power Polyurethane Blue Belts Carry Band Belts Nu-T-Link Easy Splice V-Belting Synchro-Power Polyurethane Twin-Power Blue Belts Fort Myers Branch Clewiston Branch 2624 Hanson Street 1310 Evercane Road Fort Myers, FL Clewiston, FL (800) (800) (239) (863) (239) Fax (863) Fax sales@bobdeansupply.com sales@bobdeansupply.com Check item availability and make secure online purchases with Bob Dean Supply s ecatalog at 207