FRICTIon DRIVES. CRE Plus cogged raw edge belt. Classic V belt. Power Plus wrapped wedge belt. SynChRonouS DRIVES Classical

Size: px

Start display at page:

Download "FRICTIon DRIVES. CRE Plus cogged raw edge belt. Classic V belt. Power Plus wrapped wedge belt. SynChRonouS DRIVES Classical"

Edith Golden
5 years ago
Views:

FRICTIon DRIVES Classic V belt Power Plus wrapped wedge belt CRE Plus cogged raw edge belt Ideal for high ratio or small pulley drives, the Fenner Classic V belt has a specially

'PB ' (Precision Build) technology Accuracy and stability of length 'One Shot' tensioning - no matching necessary Complete range of lengths and sections Built using advanced

'PB ' (Precision Build) technology Accuracy and stability of length 'One Shot' tensioning - no matching necessary Meets highest industry standards for static conductivity and

htd timing belt high torque drive belt Torque Drive Plus 3 premium belt Fenner Classical Timing s are the original square toothed belts.

Wide range of belts and Taper Lock TM pulleys Built to ISO standards - interchangeable world-wide Efficient and economical Fenner HTD timing belts are the first generation of

With their associated Taper Lock TM pulleys, they form cost-effective drives for medium duty applications.

1 FRICTIon DRIVES Classic V belt Power Plus wrapped wedge belt CRE Plus cogged raw edge belt Ideal for high ratio or small pulley drives, the Fenner Classic V belt has a specially treated jacket to give superior anti-static, heat and oil resistant properties. 'PB ' (Precision Build) technology Accuracy and stability of length 'One Shot' tensioning - no matching necessary Complete range of lengths and sections Built using advanced technology, Fenner Power Plus achieves economic performance by use of low elongation polyester cords and abrasion resistant impregnated jacket fabric. 'PB ' (Precision Build) technology Accuracy and stability of length 'One Shot' tensioning - no matching necessary Meets highest industry standards for static conductivity and nonignition properties Heat and oil resistant ISO & RMA sections Fenner CRE Plus excels in the high ratio applications used in today's compact drive envelopes, by combining flexibility with structural stability. All the advantages of Power Plus as well as: Special compounds used to improve flexibility and strength Higher running efficiency than wrapped belts SynChRonouS DRIVES Classical htd timing belt high torque drive belt Torque Drive Plus 3 premium belt Fenner Classical Timing s are the original square toothed belts. In conjunction with their associated pulleys Classical belts provide an economic solution for light drive applications. Wide range of belts and Taper Lock TM pulleys Built to ISO standards - interchangeable world-wide Efficient and economical Fenner HTD timing belts are the first generation of metric 'curvilinear' tooth form synchronous belts for 'High Torque Drives'. With their associated Taper Lock TM pulleys, they form cost-effective drives for medium duty applications. All metric drive system - to ISO standards Curvilinear tooth form improves stress distribution for higher tooth strength More compact drive than Classical timing belt drives TM Full range of Taper Lock pulleys in 5, & mm pitch The state of the art Fenner Torque Drive Plus 3 (TDP3) works with standard HTD pulleys to provide the ultimate combination of power capacity, low noise and high accuracy in a belt drive. The highest power rating in the range Enhanced compounding and glassfibre cord excel in highly dynamic applications Ultra compact and cost effective Polyamide facing layer reduces noise and extends life Quiet operation, even at high speeds Replaces HTD belts to extend life and increase load capability

Quattro Plus premium CRE belt PowerTwist Plus link belting Concord banded belt This CRE belt transmits up to 4 times the power of conventional V belts.

Ideal problem solving belt 4x power transmission 'One Shot' tensioning - no matching necessary Meets industry standards for static conductivity and non-ignition properties High

00 Torque Drive Plus 3 is only available in & mm pitches Classical Timing XL 5.1 ( 1 /5") 2.30 1.27 L 9.5 ( 3 /") 3.50 1.91 h 12.7 ( 1 /2 " ) 4.00 2.29 Xh.2 ( 7 /").40.

Made to any length in seconds Available in standard (Z, A, B, C), & double sections (AA, BB etc) Highly resistant to heat, water, oil, chemicals etc Use with Fenner ISO

applications Ideal for problematic drives. The advantages or Fenner wedge belts are combined with a neoprene/ fabric band to form a single belt.

2 Quattro Plus premium CRE belt PowerTwist Plus link belting Concord banded belt This CRE belt transmits up to 4 times the power of conventional V belts. The increase in cross sectional rigidity provided by fibre-reinforced polychloroprene contributes significantly to the performance advantages. Ideal problem solving belt 4x power transmission 'One Shot' tensioning - no matching necessary Meets industry standards for static conductivity and non-ignition properties High efficiency for low running costs SynChRonouS DRIVES htd and TDp3 (MXp) Pitch Total Tooth height height 5M M/MXP M/MXP Torque Drive Plus 3 is only available in & mm pitches Classical Timing XL 5.1 ( 1 /5") L 9.5 ( 3 /") h 12.7 ( 1 /2 " ) Xh.2 ( 7 /") The state of the art solution for emergency replacement and fitment into inaccessible locations. Made to any length in seconds Available in standard (Z, A, B, C), & double sections (AA, BB etc) Highly resistant to heat, water, oil, chemicals etc Use with Fenner ISO standard Taper Lock TM pulleys, optionally with RMA pulleys Easy to install, rivet-less construction, no tools necessary Standard or optional soft back, for conveying applications Ideal for problematic drives. The advantages or Fenner wedge belts are combined with a neoprene/ fabric band to form a single belt. Solves problems due to; Vibrations Large centre distance Vertical shafts Can be supplied to suit either Fenner ISO standard Taper Lock TM pulleys, or RMA standard pulleys. The CoMpLeTe Range - Sections and pitches (dims in mm) FRICTIon DRIVES Classic V-belt Width Depth Z A B C D power plus SPZ SPA SPB SPC 1 V/Delta CRe plus/quattro plus XPZ/QXPZ XPA/QXPA XPB/QXPB QXPC 1 synchronous Friction

3 Section : 3 Friction Drives Fenner Ultra PLUS & Ultra PLUS 150 PB Wedge s ISO 4 DIN 7753 BS RMA IP In addition to their precision-built qualities, Fenner Ultra PLUS wedge belts have superior anti-static and oil-resistant properties. All Fenner Ultra PLUS and Ultra PLUS 150 wedge belts are static conductive to the ISO 1 standard and conform to the anti-static specifications of the American Petroleum Institute (API) for similar belts. They will not readily self-ignite under severe slip/stall conditions, subject to maximum surface temperature limitations Designation SPZ Designation SPZ SP A SPZ SP Designation SPZ A SPB SP A SPB A SPC Designation SPB SPB SPC SPC V SPC Designation V SPZ SPA SPB USPB SPC USPC Metric Imperial 3V Metric Imperial 3V Metric Imperial 5V Metric Imperial 5V V V Z/ Z/ A/ - Z/ 950 A/ Z/ B/ 2000 A/ B/ 1950 A/ C/ - B/ 4000 B/ C/ - C/ D/ C/ 300 D/32 D QXPZ 2 QXPZ QXPA - 90 QXPB QXPC QXPZ QXPA QXPZ QXPA QXPB QXPA QXPB QXPC QXPB QXPC QXPC SPZ 2 - SP A SPB SPC V Designation V Metric Imperial V Z/ A/ B/ C/ 130 D/ Section dimensions in millimetres. Italic type denotes not held in stock at all locations. Bold type denotes standrad sizes in ISO Metric designations show pitch length in mm. Imperial designations show effective length in 1/ inches Note: The ISO 4 standard now refers to datum lengths, which are essentially the same as pitch lengths QXPZ QXPA QXPB QXPC 3

4 Friction Drives Section : 3 Fenner CRE PLUS, Quattro PLUS CRE Wedge s ISO 4 DIN 7753 BS 3790 Z/ Z/ Z/ A/ A/ Fenner cogged raw edge wedge belts are precision built for excellent length matching. They are manufactured from high quality polymer and textile materials for superior heat and oil resistance. All Fenner CRE PLUS and Quattro PLUS cogged raw edge wedge belts are static conductive limitations. A/ B/ B/ B/ C/ C/ C/ to the ISO 1 standard and conform 32 to the anti-static specifications of the American Petroleum Institute (API) for similar belts. They will not ignite under 20 severe 20 slip/ 20 stall conditions, subject to maximum surface temperature D/32 D/32 D/32 QXPZ QXPZ QXPZ QXPZ QXPA QXPA QXPA QXPB QXPB QXPB QXPC QXPC QXPC Designation Designation Designation Designation XPZ QXPZ XPA QXPA XPB QXPB XPC QXPC PRODUCT CODES digit for standard vee-belts Digits Product Group 20 Ultra PLUS CRE PLUS Ultra PLUS Quattro PLUS Digit Section Letter (USP, SP, XP, QXP) Z, A, B, C, Digits 5 to : D (V) Length 0 then first three of 4-figure lengths or, first 4 of 5-figure 0 lengths 230 For example: 24 Ultra PLUS SPB200 is coded B Quattro PLUS QXPZ 1250 is coded 29Z DATA FOR ALL WEDGE BELTS Metric belt designation denotes pitch length in mm. SPZ: Lo = Lp + mm SPA: Lo = Lp + 1mm SPB: Lo = Lp + mm SPC: Lo = Lp + 30mm Lp = Pitch length Lo = Outside length PITCH LENGTH Lp = Li + mm (Inside length) Section Wrapped CRE Quattro PLUS Ultra PLUS 150 SPZ SPA SPB SPC V MASS PER UNIT LENGTH kg/m Section Wrapped CRE Quattro PLUS Ultra PLUS 150 SPZ SPA SPB SPC V WORKING TEMPERATURES Fenner Ultra PLUS and CRE PLUS wedge belts perform satisfactorily within the temperature range -40 to +70 C Quattro PLUS temperature range -40 to +0 C Ultra PLUS 150 temperature range -40 to +0 C Metric designations are pitch lengths in mm. Imperial belt designation denotes approximate effective length in tenths of an inch in accordance with RMA standards. Note: The ISO 4 standard now refers to datum lengths, which are essentially the same as pitch lengths. For similar cross sections, other designations include SPZ, Alpha, 3V & 9N SPB, Beta, 5V & 15N V, Delta, & 25N SPZ, SPA, SPB & SPC belt designations shown in heavier type identify standard sizes in ISO 4. lengths in italic type are available but not ex stock in all locations. Consult your Authorised Distributor for non-listed belt lengths. FEN01/12 FEN01/ : Drive Design & Maintenance Manual 37

5 Fenner Poly-F Plus PB Spacesaver Wedge s Poly-F-Plus PB belts are ' Precision Built' and subject to precise length control and no need for matching of belts. The unique 'HSS' process of Heat Stretching and Length stabilizing ensures that belts retain the tension and stay matched. Poly-F-Plus PB belts require only one shot tensioning. Space saver Wedge overcome difficulties like shaft overhang, larger Guards and Pulleys and thus enhances Bearing life. Fenner has the unique distinction of being the only company in India to be accredited with API certification. SPZ SPZ SPA SPZ30 SPZ70 SPZ7 SPZ750 SPZ70 SPZ00 SPZ25 SPZ50 SPZ900 SPZ940 SPZ950 SPZ00 SPZ SPZ0 SPZ0 SPZ20 SPZ10 SPZ0 SPZ1200 SPZ1250 SPZ1270 SPZ20 SPZ40 SPZ4 SPZ5 SPZ00 SPZ20 SPZ70 SPZ1500 SPZ1520 SPZ150 SPZ00 SPZ50 SPZ00 SPZ100 SPZ150 SPZ1900 SPZ2000 SPZ2030 SPZ2120 "For all unlisted sizes please consult Fenner" SPZ20 SPZ40 SPZ0 SPZ230 SPZ24 SPZ2500 SPZ2540 SPZ250 SPZ20 SPZ200 SPZ240 SPZ3000 SPZ3150 SPZ30 SPZ3350 SPZ3550 SPA SPA00 SPA25 SPA50 SPA75 SPA900 SPA950 SPA975 SPA00 SPA30 SPA0 SPA90 SPA20 SPA50 SPA0 SPA10 SPA1250 SPA120 SPA20 SPA0 SPA00 SPA50 SPA57 SPA1500 SPA1550 SPA00 SPA50 SPA00 SPA50 SPA100 SPA150 SPA1900 SPA1925 SPA1950 SPA2000 SPA200 SPA2120 SPA210 SPA40 SPA0 SPA2300 SPA230 SPA2430 SPA2500 SPA250 SPA250 SPA2720 SPA200 SPA2900 SPA3000 SPA3150 SPA3350 SPA3550 SPA3750 SPA4040 SPA4250 SPA4500

6 Fenner Poly-F Plus PB SPB1250 SPB20 SPB40 SPB00 SPB1500 SPB1550 SPB00 SPB00 SPB100 SPB1900 SPB2000 SPB2020 SPB2120 SPB2150 SPB40 SPB0 SPB230 SPB24 SPB2500 SPB2530 SPB250 SPB20 SPB200 SPB240 SPB3000 SPB3150 SPB30 SPB3350 SPB3550 SPB3750 SPB300 SPB4000 SPB400 SPB4250 SPB43 SPB4500 SPB450 SPB4750 SPB420 SPB5000 SPB5070 SPB5300 SPB530 SPB500 SPB50 SPB000 SPB300 SPB340 SPB700 SPB70 SPB7500 SPB000 SPC2000 SPC2120 SPC40 SPC230 SPC2500 SPC250 SPC200 SPC3000 SPC3150 SPC3350 SPC3550 SPC3750 SPC4000 SPC4250 SPC4500 SPC4750 SPC5000 SPC5300 SPC540 SPC500 SPC000 SPC300 SPC700 SPC70 SPC7500 SPC000 SPC500 SPC9000 SPC9500 SPC000 SPC00 SPC200 SPC00 SPC SPC SPB Wedge s "For all unlisted sizes please consult Fenner" Delta/V/25N Section (25x23mm) Designation Effective Outside Length RMA (Imperial) V-00 V-0 V-20 V-0 V-1250 V-20 V-00 V-1500 V-00 V-00 V-100 V-1900 V-2000 V-2120 V-40 V-230 V-2500 V-2550 V-250 V-200 V-3000 V-3150 V-3350 V-3550 V-3750 V-4000 V-4250 V-4500 V-4750 V-5000 Delta (Metric) 25N N N N N N N N-3 25N N N N N N N N N N-40 25N N-70 25N N N N N N-0 25N-00 25N N N RMA (Inches) Delta (mm)

BELT DRIVES BELT DRIVES. the mark of engineering excellence

BELT DRIVES BELT DRIVES. the mark of engineering excellence BELT DRIVES BELT DRIVES TS PULLEYS CHAINS SPROCKETS SHAFT FIXINGS COUPLINGS GEARED DRIVES BELTS PULLEYS CHAINS SPROCKETS SHAFT FIXINGS COUPLINGS the mark of engineering excellence the mark of engineering