AN ISO/TS 16949:2002, ISO & OHSAS Co.

Size: px

Start display at page:

Download "AN ISO/TS 16949:2002, ISO & OHSAS Co."

James Carpenter
6 years ago
Views:

1 I N D U S T R I A L V B E L T S AN ISO/TS 16949:2, ISO 1 & OHSAS Co.

WRAP BELTS 8 Z A B 20 C 25 D E X set Classical Belts 20.0 25.0 32.0 3 5.0 6.0 11.0 19.0 23.

4184 IS 2494 imum 50 71 112 160 180 250 355 500 35.0 9.50 35.5 31.0 57.0 44.5 90.0 2.0 195.0 0.0 65 375.0 65 655.0 662.

0 1 DIN 7753 imum 63 90 1 180 224 5 576 9 21 50 4953 9144 16764 9601 16789 3V 5V 8V X set 9.7 15.8 25.4 Narrow Belts 23.

0 Hexagonal Belts IS 1, ISO 5289 IS 1, ISO 5289 IS 1, ISO 5289 RMA IP 21, IS 1, ISO 5289 imum 80 125 224 43 73 89 0 660

5 12.0 20.0 25.0 15.9 19.0 25.5 37.0 44.5.3 12.0 15.0 19.0 25.5.3.5 28.

2 WRAP BELTS 8 Z A B 20 C 25 D E X set Classical Belts DIN 2215 IS 2494,, ISO 4184 IS 2494,, ISO 4184 IS 2494,, ISO 4184 DIN 2215 IS 2494,, ISO 4184 DIN 2215 IS 2494,, ISO 4184 IS 2494 imum X set Wedge Belts SPZ SPA SPB 19 SPC DIN 7753 imum V 5V 8V X set Narrow Belts 23.0 RMA IP 22 RMA IP 22 RMA IP 22 imum AA BB CC 25 X set DS 25.0 Hexagonal Belts IS 1, ISO 5289 IS 1, ISO 5289 IS 1, ISO 5289 RMA IP 21, IS 1, ISO 5289 imum Le HA HB HC HD HE HZ HSPZ HSPA HSPB HSPC H3V H5V H8V X set MB Banded Belts ISO 5291 ISO 5291 ISO 5291 ISO 5291 PIX PIX ISO 5290 ISO 5290 ISO 5290 imum pulley diameter 80 de 1 de 2 de 370 de 520 de 55 de 67 dp 0 dp 160 dp 224 dp 67 de 180 de 3 de mm 9042 mm 914 mm 5000 mm 78 mm 9144 mm 2235 mm mm

RAW EDGE BELTS X tra Raw Edge Moulded Cogged Classical Belts ZX

imum 63 90 1 23 22 21 21 XPZ XPA XPB XPC X tra Raw Edge Moulded

0 RMA IP 22 RMA IP 22 RMA IP 22 imum 56 112 254 24 24 98 202 203

HXPA HXPB HXPC H3VX H5VX HAVX- HAVX-13 9.7 15.8 12.0 20.0 15.9 19.

5" 600 mm 600 mm Conforms to ISO 5291,, ISO 5290 & DIN 7753 s.

3 RAW EDGE BELTS X tra Raw Edge Moulded Cogged Classical Belts ZX AX BX CX Conforms to IS 2494,, ISO 4184 standards. imum XPZ XPA XPB XPC X tra Raw Edge Moulded Cogged Wedge Belts 1 imum VX 5VX 8VX X tra Raw Edge Moulded Cogged Narrow V-Belts 23.0 RMA IP 22 RMA IP 22 RMA IP 22 imum X tra MB Raw Edge Moulded Cogged Banded Belts HAX HBX HCX HXPZ HXPA HXPB HXPC H3VX H5VX HAVX- HAVX " 23.5" 23.5" 600 mm 600 mm 600 mm 600 mm 23.5" 23.5" 600 mm 600 mm Conforms to ISO 5291,, ISO 5290 & DIN 7753 s. " " " 5080 mm 5080 mm 5080 mm 5080 mm " " 5080 mm 5080 mm X tra Raw Edge Plain Belts X tra Raw Edge minated Belts s, & Product : Same as that of Raw Edge Moulded Cogged Belts s, & Product : Same as that of Raw Edge Moulded Cogged Belts 2

VARIABLE SPEED BELTS x8 25x13 32x15 x18 45x20 51x20 58x25 64x25 X set VS (deg) 34 34 800 80 11 1500 1524 1816 19 19 12 9068 89 9093 9525 9525 6604 6604 Conforms to ISO 34:1989 standards.

22V-A22/1422V 22 8 22 V-A22/1922V 22 37V-A22/2322V 37 11 22 V-A/19V 11 46V-A/29V 46 13 51V-A/32V 51 13 V-A/25V 15 51V-A/32V 51 16 70V-A/44V 70 18 64V-A/V 64 18 70V-A/44V 70 18 76V-A/48V 76 19

4 VARIABLE SPEED BELTS x8 25x13 32x15 x18 45x20 51x20 58x25 64x25 X set VS (deg) Conforms to ISO 34:1989 standards. 13x11 15x9 19x11 21x9 22x16 x12 33x22 x23 x20 68x24 X set VS Non-standard sizes (deg) X tra VS (Nominal) (Nominal) 22V-A22/1422V V-A22/1922V 22 37V-A22/2322V V-A/19V 11 46V-A/29V V-A/32V V-A/25V 15 51V-A/32V V-A/44V V-A/V V-A/44V V-A/48V Conforms to RMA IP 25/1991 s. X tra VS (Nominal) (Nominal) HG HH HI HJ HK HL HM HN HO Conforms to ISO 34 (E) / IS : s. X tra VS (Nominal) HI HJ HK HL HM Conforms to BS 3733:1974 s. (Nominal) X tra VS 5.00 (REC / REP) 0 (REC / REP) 9.00 (REC / REP) 0 (REC / REP) (REC / REP) (REC / REP) 0 (REC / REP) 0 (REC / REP) (REC / REP) 0 (REC / REP) 0 (REC / REP) (REC / REP) (REC / REP) (REC / REP) To.00 (REC) To 0 (REP) imum Non-standard sizes imum 86 Note: These belts can be manufactured with following dimensions - : 5 mm - 82 mm :

SPECIAL CONSTRUCTION BELTS X set HP High Power Belts X tra HP High Power Belts PIX High Power Belts Series: Available in entire range of PIX Wrapped and Raw Edge Belts.

5 SPECIAL CONSTRUCTION BELTS X set HP High Power Belts X tra HP High Power Belts PIX High Power Belts Series: Available in entire range of PIX Wrapped and Raw Edge Belts. Construction & A composite layer with higher modulus across the belt section and with good flexibility along the belt circumference provides good support to High Modulus - Low Shrinkage (HMLS) tension member and thereby enhancing the power rating of the belt by 20% to % compared to the corresponding section of a standard V-Belt. v The number of belts in a matched set of a multiple-belt-drive gets reduced. v The belt life is improved significantly. v The HMLS tension member minimises the belt stretch, improving the machine-up time. Aramid / Kevlar Cord Belts PIX Aramid / Kevlar Cord Belts Series: Available in entire range of PIX wrapped & raw edge belts. PIX Aramid cord belts are suitable for highly specialised applications under stringent operations, such as drives where take-up allowance is not provided and there are restrictions on the drive width. v Aramid is an organic polyaramide fibre that is manufactured using complex chemical processes. v Aramid is used as tension member because of its high tensile strength. X set DC Dry Cover Belts PIX Dry Cover Belts Series: Entire range of PIX wrap belts. PIX Dry cover belts are suitable for drives having clutch applications, such as lawn mowers and chemical industries where contamination is not acceptable. v These belts are usually manufactured in blue colour and can also be supplied in green, brown, red, black & white colours. v Can be made available in Polyester or Aramid cord. X tra DS Double Cog Belts PIX Double Cog Belts v Extremely flexible. v Prevents buckling. v Can be used on smaller pulleys. v Offers better heat dissipation. v Have outstanding transverse stiffness. v Exhibit high power transmission capability. PIX FRAS Belts FRAS V-Belts X set MF (Fire Resistant & Series: Available in entire range. Maintenance Free Belts Anti-Static) PIX FRAS V-belts are suitable for fire hazardous drives where working environment such as coal mines & sensitive petrochemical installations require V-belts having fire resistant properties in addition to normal antistatic properties. These belts are also certified by ATEX. Confoms to: II 2GD c IIB X (Test report no. IB ) - ATEX PIX Maintenance Free Belts v Reduced pulley groove wear due to optimized cover fabric. v Improved smooth running behavior, low vibration and strong power rating. v High shock load absorption capacity. v No re-tensioning required. v Just Fit & forget. Asymmetric Belts Tw Th á â PIX Asymmetric Belts Tw Th á â º 18º 18º 18º 18º 2º 2º 2º 2º 2º Asymmetric belts finds application in torque converter systems. They are generally used in high performance golf-kart, snowmobiles, minibikes, material handling and Industrial equipment. ght Duty Single V-Belts Series (deg) (inches) 3L L L Fractional Horse Power Belts (FHP/M) Series (deg) (inches) Series (deg) (inches) 2LX LX LX LX These belts are mainly used on Fractional Horse Power motors installed mainly in domestic appliances. These belts are used for a smaller sized machines, installed in the household appliances and are available in three different sections to meet the varying requirements. These are always used in single belt drives

14 16 13 25 Height of Pattern 3 5 5 5 85 inch 85 inch 48

Honey Comb Belts Height of Pattern (Inch) (Inch) B (x) C

(Honey comb) pattern can be provided up to 12 mm on request.

(x21) C (22x25) X set PT-6 22 Application: Ceramic tiles

22 21 25 Height of Pattern 11 15 11 (Inch) 85 66 42 73

Application: Horticulture 25 Height of Pattern 7 7 64 mm

6 PROFILE TOP BELTS B (x14) B (x16) A (13x13) 37 x 25 X set PT Application: Food grain industry Height of Pattern inch 85 inch 48 inch 64 mm 658 inch 658 inch 257 inch mm X set PT-HC Honey Comb Belts Height of Pattern (Inch) (Inch) B (x) C (22x20) Note: imum height of PT-HC (Honey comb) pattern can be provided up to 12 mm on request. Application: Tile & general industries B (x22) B (x) B (x21) C (22x25) X set PT-6 22 Application: Ceramic tiles industry Height of Pattern (Inch) (Inch) X set PT-7 37(37x25) 37 D (32x) 32 Application: Horticulture industry. 25 Height of Pattern mm 142 inch 8890 mm 633 inch X set PT-2TP Height of Pattern 3HSPB mm 9144 mm Application: Steel plate cleaning system. Corporate Office 5

RIBBED BELTS (RMA/MPTA IP-) X ceed Industrial

Effective 5080 5080 5080 5080 5080 X ceed DS

of Ribs DPK DPL Effective 2 to 13 2 to 11 1195

Abrasion & Flex cracking resistance is very

7 RIBBED BELTS (RMA/MPTA IP-) X ceed Industrial Belts Belt Rib PH PJ PK PL PM Pulley Diameter Effective X ceed DS Double Sided Poly Belts No. of Ribs DPK DPL Effective 2 to 13 2 to X ceed EL Elasticated Belt (PJ) EL npj Effective No. of Ribs 2 to Note: n = no. of ribs X ceed EPDM Poly Belts Working Temperature up to 1ºC. Abrasion & Flex cracking resistance is very high. Longer service life as compared to regular belts. Good dimensional stability. Higher power transmission. Applications: Automobiles, High Speed Engines. State-of-the-art Bazargaon Plant 6

Tooth Height B 1.27 1.91 2.29 Conforms to BS 4548 s. Belt C 2. 3.60 4.

8 TIMING / SYNCHRONOUS BELTS v Trapezoidal tooth profile. v High efficiency due to positive engagement between belt teeth and pulley grooves. v No re-tensioning required. v Free from maintenance. v No high tension required. Belt : Nylon Facing Polychloroprene Backing Fibre Glass Cords Polychloroprene Teeth 270 XL XL (Tooth pitch mm) 025 Belt Width 0.25 XL L H Tooth Height B Conforms to BS 4548 s. Belt C C B Product : 1 XL 1 XL 150 XL 160 XL 0 XL 180 XL 190 XL XL 2 XL 220 XL 2 XL 2 XL 250 XL 0 XL 270 XL 276 XL XL 0 XL 3 XL 412 XL 450 XL XL L 150 L 180 L 187 L 203 L 2 L 225 L 2 L 255 L 270 L 285 L 0 L 322 L 3 L 345 L 7 L 390 L 420 L 450 L 480 L 5 L 525 L 5 L 600 L 6 L 720 L L H 2 H 255 H 270 H H 285 H 0 H 320 H 3 H 3 H 350 H 0 H 370 H 375 H 390 H 0 H 4 H 420 H 4 H 450 H H H 470 H 480 H 490 H 5 H 520 H 5 H 560 H 570 H 600 H 6 H 650 H 660 H 670 H H 725 H 7 H 750 H 770 H 800 H H H 820 H 850 H 900 H 950 H 00 H 50 H 10 H 1120 H 11 H 1150 H 1 H 1250 H 1325 H 1350 H H 1450 H 1600 H 1 H H Note : imum sleeve width is available up to 450 mm 7 6 6

9 TIMING / SYNCHRONOUS BELTS v Curvilinear tooth profile for improved stress distribution. v Reduced tooth jump due to deeper tooth design. v High efficiency due to positive engagement between belt teeth and the pulley grooves. v No re-tensioning required. v Free from maintenance. v Increased power transmission capacity. v No high tension required. Polychloroprene Backing Fibre Glass Cords Polychloroprene Teeth Nylon Facing Belt : 800 8M mm 8M (Tooth pitch mm) Belt Width mm 5M 8M 14M Tooth Height B Belt C Conforms to ISO 150 Std./ PIX s. C B Product : 5M 3 5M M M M M M M M M 7 5 5M M M M M M M M M M M 134 5M 1 7 5M M M M 160 5M 8 5M M M M M M M M M M M M M 50 5M M M M M M M M M M M M 420 8M 424 8M M M M M M M M M M M 0 8 8M M M M M M M 125 8M M M M 1 8M M M M M M 163 8M 0 8M M M M M M M M M M M 2 0 8M M M M M M M M M M M M M 85 14M 90 14M M M M M M M M M M M M M M M M M M M M 275 Note : imum sleeve width is available up to 450 mm 68

10 TIMING / SYNCHRONOUS BELTS v Modified curvilinear tooth design. v Modified & accurately spaced teeth ensure optimum entry/exit. v imum noise level. v Fiber glass tensile cords provide strength, excellent flex life and high resistance to elongation. v Durable backing protects against environmental pollution, friction & wear. v Tough nylon facing protects tooth surface. Belt : STD 150 S 5M 650 STD 150 Belt Top Width 15 mm S 5M (Tooth pitch 5.0 mm) mm S 5M S 8M Tooth Height B Belt C Conforms to ISO 150 / PIX s. Product : STD S 5M 375 STD S 5M 0 STD S 5M 500 STD S 5M 520 STD S 5M 575 STD S 5M 600 STD S 5M 625 STD S 5M 650 STD S 5M 675 STD S 5M 750 STD S 5M 800 STD S 5M 8 STD S 5M 850 STD S 5M 00 STD S 5M 50 STD S 5M 1195 STD S 5M 1270 STD S 5M 2525 S 5M STD S 8M 376 STD S 8M 4 STD S 8M 480 STD S 8M 520 STD S 8M 560 STD S 8M 584 STD S 8M 600 STD S 8M 632 STD S 8M 656 STD S 8M 712 STD S 8M 720 STD S 8M 760 STD S 8M 800 STD S 8M 824 STD S 8M 8 STD S 8M 848 STD S 8M 880 STD S 8M 896 STD S 8M 944 STD S 8M 960 STD S 8M 00 STD S 8M 32 S 8M STD S 8M STD S 8M 56 STD S 8M 72 STD S 8M 1120 STD S 8M 1 STD S 8M 1248 STD S 8M 1256 STD S 8M 1 STD S 8M 14 STD S 8M 1320 STD S 8M 1344 STD S 8M 1352 STD S 8M STD S 8M STD S 8M 1424 STD S 8M 14 STD S 8M 1680 STD S 8M 28 STD S 8M 1800 STD S 8M 1912 STD S 8M 0 STD S 8M 20 STD S 8M 00 S 8M Note : imum sleeve width is available up to 450 mm 89

v High power rating compared to respective regular synchronous belts.

v Less noise, no maintenance or equipment downtime.

mm 5M (Tooth pitch 5.0 mm) 20 Belt Width 20 mm Tooth Height B Belt C 5M 5.00 2.06 3.

450 mm PIX TIMING - POLY BELTS High efficiency due to positive drive. Fixed speed ratios.

Low maintenance with wide variety of power transmission capacities and drive speeds.

Application: PIX TIMING POLY BELT is a double-sided power transmission belt most popularly used in

11 TIMING / SYNCHRONOUS BELTS v Specially designed curvilinear tooth profile. v Reduced tooth jump due to higher teeth shear resistance. v High power rating compared to respective regular synchronous belts. v Less backlash, long life, excellent abrasion resistance. v Less noise, no maintenance or equipment downtime. Belt : Polychloroprene Backing Nylon Facing Fibre Glass Cords Polychloroprene Teeth 0 HP 5M 20 HP0 0 mm 5M (Tooth pitch 5.0 mm) 20 Belt Width 20 mm Tooth Height B Belt C 5M Conforms to PIX Product : HP 5M Size HP 5M HP 0 5M 60 Note : imum sleeve width is available up to 450 mm PIX TIMING - POLY BELTS High efficiency due to positive drive. Fixed speed ratios. No re-tensioning after installation. Low maintenance with wide variety of power transmission capacities and drive speeds. Operating temperature range -ºC to +120ºC. Application: PIX TIMING POLY BELT is a double-sided power transmission belt most popularly used in flour & rice mill, rolling mills, fruit mill industries and special industrial machines. Applicable for positive engagement, multi-pulley drives with requirement of transmitting higher power at greater speed ratios. ACCESSORIES Belt Accessories: PIX Drive Design Software Measure Digital Tension Meter Tension Tester Pulley Gauges Product Kit Abbreviations : Inside length, Le: Effective length, : length, : Outside length, : imum, : imum, Deg: Degree 8

CORPORATE OFFICE & WORKS PIX TRANSMISSIONS LIMITED J-7, M.I.D.C. Hingna Road Nagpur - 4 016. Maharashtra. India Ph.: +91-(0)-74 237729, 2501-4 Fax : +91-(0)-74 2505/6 E-mail : info@pixtrans.

With an emphasis on innovation & technology, PIX also counts some of the largest OEM s among its millions of satisfied customers worldwide.

S O U T H A M E R I C A PIX SOUTH AMERICA LIMITED Rua Felix Guilhem, 971 pa - Sao Paulo - SP CEP: 05069-000, Brazil Ph.: +55 11 11-9000 Fax : +55 11 11-61 E-mail : info@pixsam.com Web Site : www.

, Northern Ireland G E R M A N Y G m b H PIX GERMANY GmbH Nikolaus - Otto-Str. 2 Borchen 3 Germany Ph.: +49-(0)-5251 878 6003 Fax : +49-(0)-5251 878 6009 E-mail : info@pixgermany.com Web Site : www.

pixflexequip.com HYDRAULICS PIX MIDDLE EAST FZC P.O. Box No. 545, Technology Park Unit 16-1&2, RAK Free Trade Zone Ras Al Khaimah, U.A.E. Tel.: +971 7 2446 Fax: +971 7 24447 E-mail:info@pixme.

12 CORPORATE OFFICE & WORKS PIX TRANSMISSIONS LIMITED J-7, M.I.D.C. Hingna Road Nagpur Maharashtra. India Ph.: +91-(0) , Fax : +91-(0) /6 info@pixtrans.com Web Site : Subsidiary Offices PIX EUROPE LIMITED Unit 24, Farthing Road Industrial Estate Sproughton, Ipswich IP1 5AP United Kingdom Tel.: +44-(0) Fax : +44-(0) /14 info@pixeuro.com Web Site : Profile PIX is the world s fastest growing Belts & Hose Co., supplying their products to over 75 countries across the globe. This Indian multinational company is ISO/TS 16949:9, ISO 1, ISO certified with quality ranking among the best in the world. With an emphasis on innovation & technology, PIX also counts some of the largest OEM s among its millions of satisfied customers worldwide. The exceptionally good quality is complemented with the most extensive product range & backed with service of the highest standard. S O U T H A M E R I C A PIX SOUTH AMERICA LIMITED Rua Felix Guilhem, 971 pa - Sao Paulo - SP CEP: , Brazil Ph.: Fax : info@pixsam.com Web Site : PIX Europe mited, U. K. PIX Germany GmbH, Germany PIX South America Ltd., Brazil, South America PIX Flexequip Hydraulics Ltd., Northern Ireland G E R M A N Y G m b H PIX GERMANY GmbH Nikolaus - Otto-Str. 2 Borchen 3 Germany Ph.: +49-(0) Fax : +49-(0) info@pixgermany.com Web Site : HYDRAULICS PIX-FLEXEQUIP HYDRAULICS LIMITED Altona Road, sburn Co. Antrim Northern Ireland BT27 5QB Ph.: +44 (0) Fax:+44 (0) info@pixflexequip.com Web Site : HYDRAULICS PIX MIDDLE EAST FZC P.O. Box No. 545, Technology Park Unit 16-1&2, RAK Free Trade Zone Ras Al Khaimah, U.A.E. Tel.: Fax: info@pixme.ae Web Site: HYDR AULICS & TRANSMISSIONS ( H A N G Z H O U ) LT D PIX HYDRAULICS & TRANSMISSIONS (HANGZHOU) LTD. JinXing Industrial Park, West Wen Yi Road, Yu Hang, Hangzhou 3006, China Tel.: Fax: info@pixqcs.com Web Site: ST FZC PIX MIDDLE EA F REE TRADE ZONE, P. O. Bo x No. 559, RAK I TES RAS AL KHAIMA, UNITED ARAB EMRA Telefax.: PIX Middle East FZC, UAE Authorised Local Dealer PIX Hydraulics & Transmissions (Hangzhou) Ltd., China Other Products: Automotive Belts Hydraulic Hoses Spiral Hoses Hose Assemblies End Fittings PIX Industrial Belt Catalogue / October 20 /1500 PIX-FLEXEQUIP HYDRAULICS LIMITED Unit B1, Ty Verlon Industrial Estate Cardiff Road, Barry, South Glamorgan, Wales. CF63 2BE Tel.: +44 (0) / Fax : +44 (0) info@pixflexequip.com Web Site :

CONTENTS RIBBED BELTS

CONTENTS RIBBED BELTS CONTENTS V-BELTS & CUT EDGE BELTS Profile Index 1-3 Cross Sectional View 4 Product Range 5-7 Classical V-s 8-12 Wedge V-s 13-17 Narrow V-s 18-20 Hexagonal s 21-22 Banded s 23-28 Cut Edge Cogged s 29-32