Document 503 a. Lijst Liste - List
|
|
- Calvin Summers
- 6 years ago
- Views:
Transcription
1 Document 03 a OCI, Labs Revision Lijst Liste - List Keuringsinstellingen (OCI), Laboratoria (Labs) Organismes de contrôle (OCI), Laboratoires (Labs) Control Bodies (OCI), Laboratories (Labs) Producten Produits - Products Betonstaal Acier pour béton armé Concrete reinforcement Voorspanstaal Acier pour précontrainte Prestressing steel Verdeling Distribution Distribution Bewerking Façonnage Cutting, Bending and Welding Bouwstaal Acier de construction Structural Steel Lichtmasten Candélabres d éclairage public Lighting columns Verticale verkeerstekens Signalisation routière verticale Vertical road traffic signs Oplegtoestellen Appuis structuraux Structural bearings HR bouten Boulons à haute résistance HS Bolts Groep e OCAB asbl OCBS vzw Avenue Arianelaan, B-00 BRUSSELS Phone : Fax : ocab@ocab-ocbs.com Website : OCAB/OCBS
2 OCI SERVICE PUBLIC DE WALLONIE Direction des Structures en béton Rue Côte d'or 3 B LIEGE OCI VLAAMSE OVERHEID Departement Mobiliteit en Openbare Werken Afdeling Betonstructuren (ABS) Vliegtuiglaan B GENT : 04/ : 04/ d43@met.wallonie.be : 0/33 74 : 0/ betonstructuren@vlaanderen.be Groep- e INFRABEL Direction Infrastructure Directie Infrastructuur Afdeling Division I-I33 Sectie/Section 64 Rue Barastraat, 0 B BRUSSEL - BRUXELLES : 0/ 3.8 : 0/ olivier.david@infrabel.be SECO Arlenstraat 3 - Rue d'arlon 3 B BRUXELLES - BRUSSEL SERVICE PUBLIC DE WALLONIE Direction des Structures Métalliques Rue Côte d'or 3 B LIEGE VLAAMSE OVERHEID Departement Mobiliteit en Openbare Werken Afdeling Metaalstructuren (AMS) Crutzenstraat B -300 HASSELT : 0/38 : 0/38 6 b.van_geluwe@seco.be d.van_rossem@seco.be j.bellemans@seco.be : 04/ : 04/ d4@met.wallonie.be : 0/ : 0/ metaalstructuren@vlaanderen.be , doc 03-3 a 0-03.doc, Page of
3 Labs N Labs CEPESI Boulevard Roullier 6000 CHARLEROI CRM Avenue du Bois Saint-Jean 4000 LIEGE SNCB-Holding Laboratoire Place Princesse Elisabethplein BRUXELLES-BRUSSEL LABORATORIA DE NAYER Jan de Nayerlaan SINT KATELIJNE WAVER UG Laboratorium MAGNEL Technologiepark Zwijnaarde 04 0 GENT OCB Lieven Bauwensstraat 800 BRUGGE UCL - GENIE CIVIL Bâtiment Vinci, Place du Levant 348 LOUVAIN-LA-NEUVE ULg Dpt. Mécan. des Matér. & Structures Chemin des Chevreuils (B/8) 4000 LIEGE UG Laboratorium Soete Sint-Pietersnieuwstraat Gent : 07/3 7 : 07/ cepesi@cepesi.be (BELAC : 00-Test)* : 04/36..6 : 04/ fourneaux@rdmetal.ulg.ac.be (BELAC : 67-Test)* : 0/ : 0/ annelies.stevens@b-holding.be (BELAC : 07-Test)* : 0/3 33 : 0/3 e.de.meyer@labodenayer.be (BELAC : 04-Test)* : 0/64 3 : 0/ labo.magnel@ugent.be (BELAC : 0-Test)* : 00/ : 00/3 ocb@chemiphar.com (BELAC : 047-Test)* : 00/47-3 : 00/47 7 secretaire@gce.ucl.ac.be (BELAC : 3-Test)* : 04/366 3 : 04/ c.marquet@ulg.ac.be (MCI-MVI)* :0/ : 0/64 3 Patrick.DeBaets@UGent.be (MCI-MVI)* * Carefully consult the scope of accreditation to: Groep e , doc 03-3 a 0-03.doc, Page 3 of
4 3 Tests Groep e Tests Labs - 4 Tensile test NBN EN ISO 630-/ EN Bend test NBN EN ISO Rebend test NBN EN ISO Axial load fatigue test NBN EN ISO Chemical analysis NBN EN ISO Measurement geometrical characteristics Determination relative rib/indentation area Determination deviation nominal mass NBN EN ISO NBN EN ISO NBN EN ISO Tensile test NBN EN ISO Bend test on welded intersection Determination weld shear force NBN EN ISO NBN EN ISO Axial load fatigue test NBN EN ISO Chemical analysis NBN EN ISO Measurement geometrical characteristic of fabric NBN EN ISO Tensile test NBN EN ISO Bend test NBN EN ISO Reverse bend test NBN EN ISO Isothermal stress relax test NBN EN ISO Axial load fatigue test NBN EN ISO Stress corrosion test solution thiocyanate NBN EN ISO Deflected tensile test NBN EN ISO Chemical analysis NBN EN ISO , doc 03-3 a 0-03.doc, Page 4 of
5 Groep e Tests Labs 3 Measurement geometrical characteristic. NBN EN ISO Determination relative rib area NBN EN ISO Determination deviation nominal mass/m NBN EN ISO Tensile test NBN EN Charpy test NBN EN Bend and torsion test 8 30 Tensile test, ISO 37 Tensile test from bearing Tear resistance, ISO 34. Compression set, ISO 8 Accelerated ageing, ISO 88 Hardness, ISO 48 Ozone resistance, ISO 43- Testing of elastomeric bearings Shear stiffness Shear bond Compression stiffness Repeated loading PTFE/elastomer shear bond test Tensile test, Stress under proof load Proof load test, Strength under wedge loading, Wedge loading test EN ISO 88- Impact strength Impact test EN 004- Stress under proof load Proof load test, Hardness Hardness test EN 088- Hardness Hardness test EN ISO 607- NBN EN NBN EN NBN EN NBN EN , doc 03-3 a 0-03.doc, Page of
DEUTSCHE NORM DIN EN 10080
DEUTSCHE NORM DIN EN 10080 August 2005 { ICS 77.140.15; 77.140.60; 77.140.65 Supersedes DIN V ENV 10080, August 1995 edition, parts of DIN 488-1, September 1984 edition, DIN 488-2, DIN 488-4 and DIN 488-6,
More informationISO 3996 INTERNATIONAL STANDARD. Road vehicles - Brake hose assemblies for hydraulic braking Systems used with non-petroleum-base brake fluid
INTERNATIONAL STANDARD ISO 3996 Third edition 1995-02-01 Road vehicles - Brake hose assemblies for hydraulic braking Systems used with non-petroleum-base brake fluid Vkhicules routiers - Flexibles pour
More informationAnnex to the Accreditation Certificate D-PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D-PL-17453-01-00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 03.07.2017 to 02.07.2022 Holder of certificate: SPIE
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 7641 First edition 2012-11-15 Road vehicles Trailers up to 3,5 t Calculation of the mechanical strength of steel drawbars Véhicules routiers Remorques jusqu à 3,5 t Calcul de
More informationPTV TECHNICAL PRESCRIPTIONS. ELASTOMERIC SEALS: Part 1: Vulcanized Rubber FOR. Impartial institute for the monitoring of construction products
PTV 8681-1 TECHNICAL PRESCRIPTIONS TECHNICAL PRESCRIPTIONS FOR ELASTOMERIC SEALS: Part 1: Vulcanized Rubber COPRO vzw Version 1.0 dated 2017-10-17 Impartial institute for the monitoring of construction
More informationSEVENTH EDITION HOT ROLLED AND STRUCTURAL STEEL PRODUCTS
SEVENTH EDITION HOT ROLLED AND STRUCTURAL STEEL PRODUCTS HOT ROLLED AND STRUCTURAL STEEL PRODUCTS CONTENTS INTRODUCTION 1 TEST CERTIFICATES AND 2 CERTIFICATES OF COMPLIANCE BUILD WITH STANDARDS AND ACRS
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Vladimir Juarez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Vladimir Juarez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2016 Certificate Number: 2692.01 In recognition
More informationPractice Note on the Sourcing of Threaded Rod Used for Foundation Bolts
MATERIALS Practice Note on the Sourcing of Threaded Rod Used for Foundation Bolts Authors: Kevin Cowie, Alistair Fussell Affiliation: Steel Construction New Zealand Inc. Date: 20 th February 2018 Ref.:
More informationDEUTSCHE NORM June 2006 DIN EN { ICS ; Supersedes DIN EN : See start of validity
DEUTSCHE NORM June 2006 DIN EN 14399-4 { ICS 21.060.10; 21.060.20 Supersedes DIN EN 14399-4:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 4: System HV Hexagon
More informationShaft Design. Dr. Mostafa Rostom A. Atia Associate Prof.
Shaft Design Dr. Mostafa Rostom A. Atia Associate Prof. 1 Loading modes A shaft is a rotating member, usually of circular cross section, used to transmit power or motion. It provides the axis of rotation,
More informationLocking Assemblies for use with bending loads
EN 03 2011 Locking Assemblies for use with bending loads Partner for performance www.ringfeder.com A Global Presence For You The RINGFEDER POWER TRANSMISSION GMBH was founded in 1922 in Krefeld, Germany
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More information2. Runway & Crane System
2. Runway & Crane System The crane runway girders, crane, columns and building frames can all be regarded as components of the overall crane installation. The individual components cannot be designed in
More informationSeries 3400 Fiberglass Epoxy Pipe Systems using Key-Lock mechanical joint or Taper/Taper adhesive joint
Series 3400 Fiberglass Epoxy Pipe Systems using Key-Lock mechanical joint or Taper/Taper adhesive joint Uses and applications Performance Saltwater and seawater lines Brackish water lines Fire protection
More informationISO 4927 INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 4927 Second edition 2005-06-15 Road vehicles Elastomeric boots for cylinders for drum type hydraulic brake wheel cylinders using a non-petroleum base hydraulic brake fluid (Service
More informationPTV TECHNICAL PRESCRIPTIONS. ELASTOMERIC SEALS: Part 2: Thermoplastic Elastomers FOR
PTV 8681-2 TECHNICAL PRESCRIPTIONS TECHNICAL PRESCRIPTIONS FOR ELASTOMERIC SEALS: Part 2: Thermoplastic Elastomers COPRO vzw Version 1.0 dated 2017-10-20 Impartial institute for the monitoring of construction
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACCULAB INC Railroad Drive El Paso, TX Jose Gonzalez Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACCULAB INC. 9900 Railroad Drive El Paso, TX 79924 Jose Gonzalez Phone: 915 751 1000 MECHANICAL Valid To: June 30, 2020 Certificate Number: 2692.01 In recognition
More informationROLL-UP COVERS Special Products
SURE-SPRING (Patented) The P.E.I. Patented design known as SURE-SPRING represent the most advanced level of technical innovation in the field of roll-up covers. The spring mechanism design takes into account
More informationPlate Girder and Stiffener
Plate Girder and Stiffener (Gelagar Pelat dan Pengaku) Dr. AZ Department of Civil Engineering Brawijaya University Introduction These girders are usually fabricated from welded plates and thus are called
More informationTechnology on Your Wavelength
Standard forms of delivery, ex Lebanon, PA Sheets Thickness: Length: Width: 25 mm and 12.5 mm Custom thicknesses available on request 59" (1,500 mm) 3.3' (1,000 mm) Max. static load 124.0 Peak loads (rare,
More informationHPL Tubes. Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Mannesmann Precision Tubes As a leading European manufacturer of cold-drawn
More informationGeomembrane Test Methods
Appendix 2 Geomembrane Test Methods AMERICAN SOCIETY FOR TESTING AND MATERIALS (arranged by number) ASTM D-5 ASTM D-36 ASTM D-256 ASTM D-412 ASTM D-413 ASTM D-471 ASTM D-570 ASTM D-638 ASTM D-696 ASTM
More informationMASON INDUSTRIES, Inc.
DYNAMIC NATURAL FREQUENCY (Hertz) 30 20 10 8 6 MASON INDUSTRIES, Inc. Manufacturers of Vibration Control Products 350 Rabro Drive 2101 W. Crescent Ave., Suite D Hauppauge, NY 11788 Anaheim, CA 92801 631/348-0282
More informationrecostal Starter Packs, key profiled
recostal Starter Packs, key profiled NEW: Load tables according to EC 2 highest bearing capacity Formwork systems Highest bearing capacity due to key profiled boxes, highest joint category according to
More informationHPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines
HPL Tubes Seamless Precision Steel Tubes for Hydraulic and Pneumatic Pressure Lines 2 HPL Tubes Hydraulic-pneumatic pressure lines Salzgitter Mannesmann Precision SMP-Group As a leading European manufacturer
More informationPerformance Tests of Asphalt Mixtures
Performance Tests of Asphalt Mixtures Louay N. Mohammad, Ph.D. Department of Civil and Environmental Engineering LA Transportation Research Center Louisiana State University 42 nd Annual Rocky Mountain
More informationHari Shankar Singhania Elastomer & Tyre Research Institute, HASETRI, Plot No. 437, R&D Center, Hebbal Industrial Area, Mysuru, Karnataka
Page 1 of 11 CHEMICAL TESTING I. RUBBER AND RUBBER PRODUCTS 1. Polymer/ Elastomeric materials 2. Fillers Heat Loss of carbon black Ash content ASTM D5667 0.1-45 % ISO 247 Dirt Content ASTM D1278 0.1-10
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 MNP CORPORATION TECHNICAL AND RESEARCH SERVICES 1 (Corporate Facility) 44225 Utica Road Utica, MI 48317 Chad Clifford Phone: 586 254 1320 MECHANICAL Valid To:
More information2. Test Centre VUZ Velim Cerhenice
Testing laboratory locations: 1. Testing Laboratory (Not carrying out the tests) Novodvorská 1698, 142 01 Praha 4 - Braník 2. Test Centre VUZ Velim 281 02 Cerhenice The Laboratory is qualified to update
More informationReview Paper on Design and Development of Coupling Torque Endurance Test Machine with Variable Torque and Chamber Adjustment
Review Paper on Design and Development of Coupling Torque Endurance Test Machine with Variable Torque and Chamber Adjustment 1. Mr. Borude S.C.(P.G. Student, JSPM s ICOER, Pune), 2.Prof. Biradar N.S.(HOD
More informationPB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-135B - Hydraulic NC Pressbrake 135T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding On Sale Ex GST Inc GST $39,500.00 $45,425.00 $38,500.00 $44,275.00
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT CLEVELAND 5405 East Schaaf Road Cleveland, OH 44131 Jeffry J Smith Phone: 216 524 1450 Jeffry.Smith@element.com MECHANICAL Valid To: October 31, 2018
More information(English language translation, the original version is in French language) PFG expansion bolt type LB, ES and SB
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationImpact of Heavy Loads on State and Parish Bridges. Aziz Saber, Ph.D., P.E. Program Chair Civil Engineering Louisiana Tech University
Impact of Heavy Loads on State and Parish Bridges Aziz Saber, Ph.D., P.E. Program Chair Civil Engineering Louisiana Tech University Acknowledgement Funds from Louisiana Transportation Research Center LA
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-2:2006 Incorporating corrigendum July 2009 Eurocode 3 Design of steel structures Part 2: Steel bridges ICS 91.010.30; 91.080.10; 93.040 National foreword This British Standard
More informationDIN EN : (E)
DIN EN 13480-3:2017-12 (E) Metallic industrial piping - Part 3: Design and calculation Contents Page European foreword... 10 1 Scope... 12 2 Normative references... 12 3 Terms, definitions, symbols and
More informationFixed Points. 7.i
Products 7.0 Basic Assemblies 7.1 Trestle Arrangement (Assembly and Scope of Delivery) 7.2 Soundproof Fixed Points 7.3 Procedure for designing of trestle arrangement 7.4 Type tested static for trestle
More informationRubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification
BRITISH STANDARD BS ISO 11237-1:2004 Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications ICS 23.100.40; 83.140.40
More informationTechnical Lecture CRET Series 100 Design Stefan Lips
Mehr Leistung. Mehr Wert. Technical Lecture CRET Series 100 Design Stefan Lips 19.03.2014 Contents Scope of application Component structure Design concept 2 Scope of application The main area of application
More informationDesign principles and Assumptions
Design principles and Assumptions The design and use of concrete slabs that utilise ARMOURDECK 300 in composite construction may be carried out using either: the relevant Australian and international Standards
More informationThis document is a preview generated by EVS
INTERNATIONAL STANDARD ISO 16301 First edition 2017-09 Rubber and plastics hoses and hose assemblies, wire- or textile-reinforced, for manually operated hydraulic jacks Specification Tuyaux et flexibles
More informationROLL-UP COVERS Standard products
A ROLL-UP COVERS Standard products P.E.I. Roll-up Covers are normally equipped with our patented system of multiple springs. This offers countless advantages: Reliability Compact size Extremely high speeds
More informationPB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge
PB-170B - Hydraulic NC Pressbrake 176T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge Ex GST Inc GST $40,950.00 $45,045.00 ORDER CODE: S909 MODEL: Control Unit (Type): PB-170B Estun
More informationApplicable standards in HS Infrastructure subsystem TSI (2008/217/EC)
Applicable standards in HS Infrastructure subsystem TSI (2008/217/EC) ERA 1.0 Page 1/8 Standards or other documents referred to in the HS infrastructure TSI (and therefore mandatory) TSI Sections Characteristics
More information4.5 COMPOSITE STEEL AND CONCRETE
4.5 COMPOSITE STEEL AND CONCRETE 4.5.1 RULES OF THUMB 4.5 Composite Steel and Concrete (1/11) Typical starting point Overall concrete depth 130mm (Grade 30) Depth of profiled decking 60mm Size beam with
More informationBuffer elements 1109
Buffer elements 1109 Technical information for rubber-metal buffers Our rubber-metal buffers are simple and cost-efficient standard units for elastic mounting. They are ideally suited for compressive and
More informationTERWA REBAR CONNECTION COUPLERS. CARES Technical Approval 5058 TA1B
Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page 2 EURO ACCESSORIES TERWA REBAR CONNECTION COUPLERS CARES Technical Approval 5058 TA1B Reinforcement Couplers New_Layout 1 07/02/2017 15:41 Page
More informationAnnex to the Accreditation Certificate D PL according to DIN EN ISO/IEC 17025:2005
Deutsche Akkreditierungsstelle GmbH Annex to the Accreditation Certificate D PL 11140 18 00 according to DIN EN ISO/IEC 17025:2005 Period of validity: 06.11.2014 to 05.11.2019 Holder of certificate: Fraunhofer
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 14691 First edition 1999-11-01 Petroleum and natural gas industries Flexible couplings for mechanical power transmission General purpose applications Industries du pétrole et
More informationTecnical specifications Fiche technique
Tecnical specifications Fiche technique Tipper Truck Camion TRIBENNE 20m³ Maz - 33T - 400HP - 6x4 MAZ-650108-8230-700 PURPOSE Utilisation : Transportation of different bulk loads on the roads with allowed
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8535-1 Fifth edition 2011-12-01 Diesel engines Steel tubes for highpressure fuel injection pipes Part 1: Requirements for seamless cold-drawn single-wall tubes Moteurs diesels
More informationOur test laboratory - Apparatebau Kirchheim-Teck GmbH
1 / 16 Test laboratory equipment 1 Microsection lab for crimp contacts Tensile, pressure and bending test machine: Static + dynamic Vibration test: Vibration + shock Climate tests: Temperature + humidity
More informationDesign Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables)
TF 209-R-08 Metric Design Aids For Structural Welded Wire Reinforcement (Metric Units for WWR/Rebar Comparison Tables) INTRODUCTION This Tech Fact* provides basic information on coldworked wire and welded
More informationEnglish version. Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM EN 12697-34 June 2004 ICS 93.080.20 English version Bituminous mixtures - Test methods for hot mix asphalt - Part 34: Marshall test Mélanges bitumineux
More informationStatic Servohydraulic Universal Testing Machines
Materials Testing Systems 45 Static Servohydraulic Universal Testing Machines A B C D E F G H I J K L M N O P Q R S T 46 Materials Testing Systems Static Servohydraulic Universal Testing Machines for Load
More informationDocument No. APITT7-PDS
Document type: PDS Status: Prepared by: Erik Conradi Approved by: Aksel Bråthen Document No. APITT7-PDS Product Data Sheet: API Torque tool Class 7 Created Date: 20.10.2014 Version: 1 Last Modified Date:
More informationDESIGN OF MACHINE MEMBERS - I
R10 Set No: 1 III B.Tech. I Semester Regular and Supplementary Examinations, December - 2013 DESIGN OF MACHINE MEMBERS - I (Mechanical Engineering) Time: 3 Hours Max Marks: 75 Answer any FIVE Questions
More informationISO INTERNATIONAL STANDARD. Metallic tube connections for fluid power and general use Part 2: 37 flared connectors
INTERNATIONAL STANDARD ISO 8434-2 Second edition 2007-09-01 Metallic tube connections for fluid power and general use Part 2: 37 flared connectors Raccordements de tubes métalliques pour transmissions
More informationEJOT Multifix VSF. EJOT Baubefestigungen GmbH In der Stockwiese BAD LAASPHE Germany
Member of Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 www.eota.eu Tél. : (3 01 64 68 82 82 Fax : (3 01 60 05 70 37 European Technical
More informationEVERCONNECT TM. Table of Contents. No-Hub Pipe. Flexible. 7 Couplings. Pipe Caps. Heavy Weight. Test Plugs. Couplings. Shielded Transition
Table of Contents No-Hub Pipe Couplings Heavy Weight Couplings Shielded Transition Couplings 3 4 4 Flexible Pipe Caps Test Plugs Drain/Trap & Tubular Connectors 7 7 8 EVERCONNECT TM Flexible & Reducing
More informationPB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding
PB-70B - Hydraulic NC Pressbrake 70T x 3200mm Estun NC-E21 Control 2-Axis with Hardened Ballscrew Backgauge - Includes Safety Light Guarding Ex GST Inc GST $29,400.00 $32,340.00 $27,950.00 $30,745.00 Special
More informationElastomeric Bearings & Industrial Products. Elastomeric Bearings & Industrial Products. EA Bearings. EA Bearings. EA Series Standard Bearings
EA Bearings EA Bearings EA Series Standard Bearings Support and Installation Part Number These bearings are designed to support a vertical load up to 2000kN with the constant bearing temperature not exceeding
More informationServices for passengers with reduced mobility
Services for passengers with reduced mobility Valid from 01/12/13 Destination better SNCB Dear customer, Our motto, Destination: better, means we are committed to making sure each and every passenger is
More informationPROTOLON (SB) PROTOLON (SB) with Copper Core Shield Flexible Cables for Trailing Operation
PROTOLON (SB) PROTOLON (SB) with Copper Core Shield Flexible Cables for Trailing Operation 2 17 BUIS_003.tif 2 18 BUIS_004.tif Selection and dimensioning criteria Refer to Section 4 for further details
More informationThe FRACOF Composite Slab Test
The FRACOF Composite Slab Test Experiment, Predictions & Results Anthony Abu & Ian Burgess Fire Resistance Assessment of partially protected COmposite Floors - FRACOF Introduction To increase the use of
More information(English language translation, the original version is in French language) FM 753
Centre Scientifique et Technique du Bâtiment 84 avenue Jean Jaurès CHAMPS-SUR-MARNE F-77447 Marne-la-Vallée Cedex 2 Tél. : (33) 01 64 68 82 82 Fax : (33) 01 60 05 70 37 Autorisé et notifié conformément
More informationEurocode 3 Design of steel structures
BRITISH STANDARD BS EN 1993-1-5:2006 Incorporating corrigendum April 2009 Eurocode 3 Design of steel structures Part 1-5: Plated structural elements ICS 91.010.30; 91.080.10 National foreword This British
More informationGOOD DESIGN INTEGRATED SOLID ALUMINUM HEATSINK
Lap 35 INTEGRATED SOLID ALUMINUM HEATSINK ADA compliant, Elegant design, even indirect light distribution Energy efficient white LED lighting, dimming available GOOD DESIGN Anatomy LAP CHROME DRIVER BOX
More informationThis document is a preview generated by EVS
EUROPEAN PRESTANDARD PRÉNORME EUROPÉENNE EUROPÄISCHE VORNORM ENV 807 May 2001 ICS 71.100.50 Supersedes ENV 807:1993 English version Wood preservatives - Determination of the effectiveness against soft
More informationDEUTSCHE NORM June 2006 DIN EN { ICS Supersedes DIN EN : See start of validity
DEUTSCHE NORM June 2006 DIN EN 14399-6 { ICS 21.060.30 Supersedes DIN EN 14399-6:2005-06 See start of validity High-strength structural bolting assemblies for preloading Part 6: Plain chamfered washers
More informationPresident For the Accreditation Council Certificate Number Valid to August 31, 2008
A2LA has accredited THE AMERICAN ASSOCIATION FOR LABORATORY ACCREDITATION ACCREDITED LABORATORY PEARL LEATHER FINISHERS, INC. TESTING LABORATORY Johnstown, NY for technical competence in the field of Mechanical
More informationASSESSMENT REPORT 08 - U - 096
FIRE TEST OF BUILDING ELEMENTS According to EN 13381-5 ASSESSMENT REPORT 08 - U - 096 Reference test reports : 08 - U - 096 08 - U - 104 08 - F - 112 08 - F - 125 Scope Sprayed product MONOKOTE MK6-HY
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ELEMENT MATERIALS TECHNOLOGY MINNEAPOLIS LLC (A subsidiary of Element Materials Technology Minneapolis Inc.) 9725 Girard Avenue South Minneapolis, MN 55431
More informationLASTO BLOCK elastomeric bearings
LASTO BLOCK elastomeric bearings Choice of bearing mageba LASTO BLOCK elastomeric bearings permit the simultaneous support of the following loads: Vertical loads Transient external horizontal forces Horizontal
More informationCertificate of Accreditation
ISO/IEC 17025:2005 Certificate of Accreditation Certificate Number L2195 Exova, Inc. Anaheim 3883 East Eagle Drive Anaheim CA 92807 has met the requirements set forth in L-A-B s policies and procedures,
More informationCORDAFLEX(SMK) (N)SHTÖU Tough Rubber-Sheathed Reeling Cables
CORDAFLEX(SMK) (N)SHTÖU Tough Rubber-Sheathed Reeling Cables 3 SK1_1-001.tif 4 SK1_1-003.tif SK1_1-00.tif Selection and dimensioning criteria Refer to Section 4 for further details Ü Type CORDAFLEX(SMK)
More informationCOMPFIRE. Reaction Frame. Camera 3. Macalloy Bars. Camera 2. Link Bar. Support Beam. Oven Bar. Camera 1. Jack Bar.
Reaction Frame Macalloy Bars Camera 3 Support Beam α Oven Bar Camera 2 Link Bar Camera 1 Tested Connection Jack Bar Electrical Furnace Reaction Frame Load Jack 22 September 2010 1 Oven Bar Link Bar View
More informationJaw In-Shear 6 Pin Reduces Downtime, Maintenance, And Inventory Costs
Jaw In-Shear 6 Pin Reduces Downtime, Maintenance, And Inventory Costs Lovejoy's commitment to continual product improvement is demonstrated in the next generation of the Jaw In-Shear (JIS) coupling - the
More informationProduct Brochure For K058. Description. Features. Auckland: (09)
HG-3206 & PB-135B - Hydraulic NC Guillotine & NC Pressbrake Package Deal Guillotine - 3200 x 6mm, Pressbrake 3200mm x 135 Ton Ezy-Set NC-89 & Estun NC-E21 Controls Package Deal Ex GST Inc GST $65,900.00
More informationWater Supply and Sewerage Approved Products Manual - February 2006
Water Supply and Sewerage Approved Products Manual - February 2006 Gravity Sewerage Products Vitrified Clay Pipeline System Section SGPS 02 Last updated Jan 2007 CONTENTS A SGPS 02-S1 PIPES TO EN 295 A
More informationSERTO Products are Nationally Distributed by: Securely Fastened Function Guaranteed. Tube Clamps with a System
SERTO Products are Nationally Distributed by: MARYLAND METRICS Faxes: (410)358-3142 (800)872-9329 Phones: (410)358-3130 (800)638-1830 P.O.Box 261 Owings Mills, MD 21117 USA url: http://serto.net email:
More informationTEST REPORT F INSPECTION IN ACCORDANCE WITH EN 14764:2005 CITY AND TREKKING BICYCLES- SAFETY REQUIREMENTS AND TEST METHODS
TEST REPORT F 900978-1 2009-02-05 INSPECTION IN ACCORDANCE WITH EN 14764:2005 CITY AND TREKKING BICYCLES- SAFETY REQUIREMENTS AND TEST METHODS SKEPPSHULT SOFT S M P S V E N S K M A S K I N P R O V N I
More informationTEST REPORT. Ceram Reference: (QT21489/2/SL)/Ref: 1.0A. Tensile and Frictional Tests on the Fast Fit BeamClamp Systems.
TEST REPORT Ceram Reference: 121557 (QT21489/2/SL)/Ref: 1.0A Project Title: Tensile and Frictional Tests on the Fast Fit BeamClamp Systems Client: Kee Safety Limited For The Attention of: Mr Phil Higgs
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationBE-CERT: Who are we? BE-CERT npo since 2014 Our staff. Our location. Our mission. 13 members +
BE-CERT: Who are we? BE-CERT npo since 2014 Our staff 13 members + Our location Whe moved! Near Viaduct Herrmann-Debroux (!) next to Metro Station Demey Our mission Quality@First BE-CERT: Our assignment
More informationPlastic Hinging Considerations for Single-Column Piers Supporting Highly Curved Ramp Bridges
Plastic Hinging Considerations for Single-Column Piers Supporting Highly Curved Ramp Bridges Western Bridge Engineers Seminar Reno, NV Greg Griffin, P.E., S.E. - Senior Bridge Engineer e Griffin, P.E.,
More informationHASSE & WREDE VISCO DAMPER AFTER SALES SERVICE. Visco damper AFTER SALES SERVICE
HASSE & WREDE VISCO DAMPER AFTER SALES SERVICE Visco damper AFTER SALES SERVICE 2 HASSE & WREDE VISCO DAMPER AFTER SALES SERVICE FUNCTION A viscous damper consists of a housing which comprises an inertia
More informationSOUTH AFRICAN NATIONAL STANDARD
ISBN 978-0-626-28107-6 EN 1008:2002 SOUTH AFRICAN NATIONAL STANDARD Mixing water for concrete Specification for sampling, testing and assessing the suitability of water, including water recovered from
More informationModel B STRAIN GAGE LOAD CELL. Installation and Operating Manual
Model 1403-05B STRAIN GAGE LOAD CELL Installation and Operating Manual For assistance with the operation of this product,contact: PCB Load & Torque, Inc. Toll-free: 866-684-7107 24-hour SensorLine : 716-684-0001
More informationLightweight. Geislinger Gesilco
Lightweight Geislinger Gesilco The Geislinger Gesilco product range is based on more than 20 years of experience in developing fibre composite couplings and shafts. The maintenance-free composite membranes
More informationDESIGN OF MACHINE ELEMENTS UNIVERSITY QUESTION BANK WITH ANSWERS. Unit 1 STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS
DESIGN OF MACHINE ELEMENTS UNIVERSITY QUESTION BANK WITH ANSWERS Unit 1 STEADY STRESSES AND VARIABLE STRESSES IN MACHINE MEMBERS 1.Define factor of safety. Factor of safety (FOS) is defined as the ratio
More informationPresented By. NicolScales.com Contact Us
Presented By Dallas Ft Worth Austin Houston NicolScales.com 800.225.8181 Contact Us Nicol Scales & Measurement is an ISO Accredited Calibration Company that has provided calibration, repair and sales of
More informationStandard Elastomeric Bearings
Standard Elastomeric s Elastic support of structural members subject to static loading Scope and dimensioning guidelines planmäßig elastisch lagern Standard Elastomeric s type bi-trapez Permissible compressive
More informationSVENSK STANDARD SS-EN
SVENSK STANDARD SS-EN 13880-4 Fastställd 2003-07-11 Utgåva 1 Vägmaterial Varmapplicerade fogmassor för vägar och flygfält Del 4: Provningsmetod för bestämning av stabilitet för värmning, förändring i penetrationsvärde
More informationLONG LENGTH DESIGN MANUAL CONTENTS PAGE. Introduction Long Length features & benefits... 2 Long Length belting programme... 7
DESIGN MANUAL LONG CONTENTS PAGE LENGTH Introduction Long Length features & benefits... 2 Long Length belting programme... 7 Drive Design Belt drive selection procedure... 8 Belt pitch selection guides...
More informationFlexible Couplings & Saddles
Revised 6/01 Flexible Sewer couplings are the result of many years of experience with sewer pipe connections. Today's couplings are made of specially formulated elastomeric PVC with high tear and shear
More informationISO INTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 18752 First edition 2006-07-15 Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification Tuyaux et flexibles
More informationWhat s going on with European Specifications?
What s going on with European Specifications? Jean-Pascal PLANCHE - Total Sept. 15-16, 2003, Las Vegas eurobitume Outline Process of European standardization Current specifications Need for changes CEN/TC336
More informationThe Transrapid Guideway Switch Test and Verifikation
The Transrapid Guideway Switch Test and Verifikation (*) Karl Fichtner, (**) Franz Pichlmeier (*) ThyssenKrupp Transrapid GmbH, Moosacher Str. 58, 80809 Munich, Germany Phone +49 89 35 46 91 19, Fax: +49
More informationEXPERIMENTAL STUDY ON EFFECTIVENESS OF SHEAR STRENGTHENING OF RC BEAMS WITH CFRP SHEETS
EXPERIMENTAL STUDY ON EFFECTIVENESS OF SHEAR STRENGTHENING OF RC BEAMS WITH CFRP SHEETS Yasuhiro Koda and Ichiro Iwaki Dept. of Civil Eng., College of Eng., Nihon University, Japan Abstract This research
More information