DRIVEN and STATIC TOOLING For MURATEC
|
|
- Heather Garrett
- 5 years ago
- Views:
Transcription
1 10139 BERGIN RD. HOWELL, MI PHONE : 8-91-TOOLS ( ) FAX: 8-9-TOOLS ( ) info@mdtooling.com WEBSITE: DRIVEN and STATIC TOOLING For MURATEC
2 Live Tooling M. T. Marchetti, a major live tool manufacturer in northern Italy, is a leader in live tool technology. The formula is simple. Use only the best angular contact high-speed bearings available. Add to this an exacting tolerances for all ground shafts, gears and bearing pocket features. Next, develop a sealed system that will not allow any contamination from chips or coolant. Top this all off with a superior design and you end up with a live tool that is more rigid, faster and will last longer. We back this up with a -Year factory warranty. Our Live Tool Warranty Our tooling will give years of service in the most demanding applications. The superior design and rugged construction has proven this over the last 1 years. The reliability of our tools allows us to provide a -year factory warranty. MD T will repair any defective tool holders for a period of years from the date of purchase. Product Range We have the largest range of live tooling available for most major machine tool manufactures. Our available products include an extensive line of standard live tooling as well as specialty tool holders such as 0-90 and adjustable angle tool holders, gear hobbers, and even worm gear generators. Our product range includes geared up holders to 60,000 RPM and are engineered for 1,000 PSI coolant through. We are an industry leader in providing complete tooling solutions with hundreds of static tool options as well. Technical Support Here at MD Tooling we have a full technical support department with over 5 years of CNC experience. Our highly qualified staff can help with part processing, tooling up a job from a blue print and even assist with part programming. Applications Engineers are always available by phone to answer any questions you may have about our tooling or any other CNC related issue. Stock and Replenishment MD Tooling maintains an extensive inventory of tooling in our warehouse in Michigan. Our current fi ll rate on orders is 93% from our stock in Michigan for same day shipping. Should you require a non-stock item, our manufacturer, M.T. Marchetti also maintains a large inventory in Italy. Tooling can be obtained in as little as 3-5 business days. Shipping MD Tooling realizes that when you need tooling, often you can t wait until the next day. We process orders and ship from available stock right up until 5PM EST to make certain we get your tooling solutions to you as quickly as possible. We regularly ship throughout the day via DHL, UPS, FedEx or any other carrier that a customer requests Bergin Road Howell, MI Phone: Fax: info@mdtooling.com Web:
3 Fast, Friendly, Reliable Service! Quality tooling at highly competitive pricing. -Year Warranty on all live tools. Extensive inventory. We currently ship over 93% of all orders same day. In-house repair services available. If a warranty tool needs to be returned for inspection, service or repair, loaner tools are available to keep your machine tool production up and running. More specialty tool holders than any other manufacturer. Custom tool holders available. All available tooling may not be shown in this catalog. If you can t find the holder you re looking for, please contact our office for assistance.
4 MT1 - MT00 1 DRIVEN 1 RADIAL DRIVEN TOOL 1 AXIAL DRIVEN TOOL H=100mm (0-180) ADJUSTABLE ANGLE DRIVEN TOOL H=4mm 3 MD60 - MD10 4 DRIVEN 4 RADIAL DRIVEN TOOL 4 (0-180) ADJUSTABLE ANGLE DRIVEN TOOL H=4mm 4 MT100 15ST. 5 DRIVEN 5 RADIAL REINFORCED DRIVEN TOOL 5 RADIAL MTSK-3 DRIVEN TOOL 5 RADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y 6 AXIAL DRIVEN TOOL H=60mm 6 AXIAL MTSK-3 DRIVEN TOOL H=60mm AXIAL GEARED-UP 1: DRIVEN TOOL AXIAL DRIVEN TOOL FOR INTERNAL POLYGON-MAKING H=60mm 8 AXIAL OPPOSITE FACE TWIN DRIVEN TOOL H=60mm 8 AXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y 8 (0-180) ADJUSTABLE ANGLE DRIVEN TOOL 9 DRIVEN GEAR HOBBER 9 BROACHING/SLOTTING DRIVEN TOOL 5mm STROKE H=65mm 10 STATIC 11 RADIAL SINGLE STATIC TOOL 0mm 11 RADIAL DOUBLE STATIC TOOL 0mm 11 RADIAL BLADE HOLDER WITH BLADE KIT 11 RADIAL BLADE HOLDER WITH BLADE KIT 1 AXIAL SINGLE STATIC TOOL 0mm 1 AXIAL SINGLE BORING BAR HOLDER H=60mm 13 AXIAL SINGLE BORING BAR HOLDER H=0mm 13 Table of Contents Categorized Listing
5 MT1 - MT00 DRIVEN RADIAL DRIVEN TOOL Part Number Description Spindle I RPM Cool Thru Ext Cool A A1 D L MUR Radial Driven Tool ER5 ER5 1: X 3.16 MUR00505 Radial Driven Tool ER5 Cool Thru ER5 1: X X MUR Radial Driven Tool ERA5 ERA5 1: X 59.5 MUR Radial Driven Tool ERA5 Cool Thru ERA5 1: X X 4.5 MUR Radial Driven Tool ER3 ER3 1: X 6.16 MUR00503 Radial Driven Tool ER3 Cool Thru ER3 1: X X MUR Radial Driven Tool 16x1mm 16x1 1: X Muratec Spring 01: 1
6 MT1 - MT00 DRIVEN AXIAL DRIVEN TOOL H=100mm Part Number Description Spindle I RPM Reversible Cool Thru Ext Cool A A1 B MUR Axial Driven Tool ER5 ER5 1: X X MUR00305 Axial Driven Tool ER5 Cool Thru ER5 1: X X X MUR Axial Driven Tool ERA5 ERA5 1: X X MUR Axial Driven Tool ERA5 Cool Thru ERA5 1: X X X MUR Axial Driven Tool ER3 ER3 1: X X MUR00303 Axial Driven Tool ER3 Cool Thru ER3 1: X X X MUR Axial Driven Tool ER40 ER40 1: X X MUR Axial Driven Tool ER40 Cool Thru ER40 1: X X X MUR Axial Driven Tool 16x1mm 16x1 1: X X MUR00305 Axial Driven Tool x19mm x19 1: X X MUR00305 Axial Driven Tool x1mm x1 1: X X Muratec Spring 01:
7 MT1 - MT00 DRIVEN (0-180) ADJUSTABLE ANGLE DRIVEN TOOL H=4mm Part Number Description Spindle I RPM Reversible Cool Thru Ext Cool MUR (0-180) Adj. Angle Driven Tool ERA16 ERA16 1: X X MUR00016 (0-180) Adj. Angle Driven Tool ERA16 Cool Thru ERA16 1: X X X Muratec Spring 01: 3
8 MD60 - MD10 DRIVEN RADIAL DRIVEN TOOL Part Number Description Spindle I RPM Cool Thru Ext Cool A A1 D L MUR Radial Driven Tool ER5 ER5 1: X 3.16 MUR00405 Radial Driven Tool ER5 Cool Thru ER5 1: X X MUR Radial Driven Tool ERA5 ERA5 1: X 59.5 MUR Radial Driven Tool ERA5 Cool Thru ERA5 1: X X 4.5 MUR Radial Driven Tool ER3 ER3 1: X 6.16 MUR00403 Radial Driven Tool ER3 Cool Thru ER3 1: X X MUR Radial Driven Tool 16x1mm 16x1 1: X (0-180) ADJUSTABLE ANGLE DRIVEN TOOL H=4mm Part Number Description Spindle I RPM Reversible Cool Thru Ext Cool MUR (0-180) Adj. Angle Driven Tool ERA16 ERA16 1: X X MUR (0-180) Adj. Angle Driven Tool ERA16 Cool Thru ERA16 1: X X X Muratec Spring 01: 4
9 MT100 15ST. DRIVEN RADIAL REINFORCED DRIVEN TOOL Part Number Description Spindle I RPM Cool Thru Ext Cool A NKM Radial Driven Tool ERA0 ERA0 1: X 43 NKM Radial Driven Tool ERA0 Cool Thru ERA0 1: X X 49 NKM Radial Driven Tool ER5 ER5 1: X NKM06905 Radial Driven Tool ER5 Cool Thru ER5 1: X X RADIAL MTSK-3 DRIVEN TOOL Part Number Description Spindle I RPM Cool Thru Ext Cool A NKM Radial MTSK-3 Driven Tool MTSK-3 1: X 36. NKM11903 Radial MTSK-3 Driven Tool Cool Thru MTSK-3 1: X 44. Muratec Spring 01: 5
10 MT100 15ST. DRIVEN RADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y Part Number Description Spindle I RPM Ext Cool NKM Radial Single Side Twin Head ERA16 ERA16 1: X AXIAL DRIVEN TOOL H=60mm Part Number Description Spindle I RPM Reversible Cool Thru Ext Cool A A1 B D L NKM04050 Axial Driven Tool ERA0 ERA0 1: X X NKM04060 Axial Driven Tool ERA0 Cool Thru ERA0 1: X X X NKM04015 Axial Driven Tool ER5 ER5 1: X X NKM0405 Axial Driven Tool ER5 Cool Thru ER5 1: X X X NKM04161 Axial Driven Tool 16x1mm 16x1 1: X X NKM0419 Axial Driven Tool x19mm x19 1: X X Muratec Spring 01: 6
11 MT100 15ST. DRIVEN AXIAL MTSK-3 DRIVEN TOOL H=60mm Part Number Description Spindle I RPM Reversible Cool Thru Ext Cool B NKM10013 Axial MTSK-3 Driven Tool MTSK-3 1: X X 49 NKM1003 Axial MTSK-3 Driven Tool Cool Thru MTSK-3 1: X X X 59 AXIAL GEARED-UP 1: DRIVEN TOOL Part Number Description Spindle I RPM Reversible Cool Thru Ext Cool A B NKM Axial Geared-Up 1: Driven Tool ER11 ER11 1: 1000 X X NKM01011 Axial Geared-Up 1: Driven Tool ER11 Cool Thru ER11 1: 1000 X X X NKM01010 Axial Geared-Up 1: Driven Tool ER0 ER0 1: 1000 X X NKM0100 Axial Geared-Up 1: Driven Tool ER0 Cool Thru ER0 1: 1000 X X X NKM01030 Axial Geared-Up 1: Driven Tool ERA0 ERA0 1: 1000 X X NKM01040 Axial Geared-Up 1: Driven Tool ERA0 Cool Thru ERA0 1: 1000 X X X NKM01015 Axial Geared-Up 1: Driven Tool ER5 ER5 1: 1000 X X NKM0105 Axial Geared-Up 1: Driven Tool ER5 Cool Thru ER5 1: 1000 X X X Muratec Spring 01:
12 MT100 15ST. DRIVEN AXIAL DRIVEN TOOL FOR INTERNAL POLYGON-MAKING H=60mm Part Number Description Spindle I RPM Reversible Ext Cool A A1 D D1 NKM Axial Driven Tool for Internal Polygon ER5 ER5 1: X X 8.4 NKM Axial Driven Tool for Internal Polygon Weldon 8 WELDON 8 1: X X NKM Axial Driven Tool for Internal Polygon Weldon 10 WELDON 10 1: X X NKM Axial Driven Tool for Internal Polygon Weldon 1 WELDON 1 1: X X NKM Axial Driven Tool for Internal Polygon Weldon 16 WELDON 16 1: X X AXIAL OPPOSITE FACE TWIN DRIVEN TOOL H=60mm Part Number Description Spindle I RPM Reversible Ext Cool NKM06405 Axial Opposite Face Twin Driven Tool ER5+ER5 ER5+ER5 1: X X AXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y Part Number Description Spindle I RPM Reversible Ext Cool NKM00016 Axial Single Side Twin Head Driven Tool ERA16 ERA16 1: X X Muratec Spring 01: 8
13 MT100 15ST. DRIVEN (0-180) ADJUSTABLE ANGLE DRIVEN TOOL Part Number Description Spindle I RPM Reversible Ext Cool NKM (0-180) Adj. Angle Driven Tool ERA16 ERA16 1: X X DRIVEN GEAR HOBBER Part Number Description I MAX RPM Ext Cool D (mm) NKM Gear Hobber 1:1 D=08 1: X 08 NKM Gear Hobber 1:1 D=10 1: X 10 NKM Gear Hobber 1:1 D=13 1: X 13 NKM Gear Hobber 1:1 D=16 1: X 16 NKM10108 Gear Hobber :1 Geared Down D=08 : X 08 NKM10110 Gear Hobber :1 Geared Down D=10 : X 10 NKM10113 Gear Hobber :1 Geared Down D=13 : X 13 NKM10116 Gear Hobber :1 Geared Down D=16 : X 16 Muratec Spring 01: 9
14 MT100 15ST. DRIVEN BROACHING/SLOTTING DRIVEN TOOL 5mm STROKE H=65mm Part Number Description I MAX RPM Reversible Ext Cool NKM11000 Broaching/Slotting Driven Tool 5mm Stroke 4:1 400 X X Muratec Spring 01: 10
15 MT100 15ST. STATIC RADIAL SINGLE STATIC TOOL 0mm Part Number Description # of Tools Reversible Dimensions B H NKM Radial Single Static Tool 0mm 1 X mm 0 0 RADIAL DOUBLE STATIC TOOL 0mm Part Number Description # of Tools Reversible Dimensions B H NKM Radial Double Static Tool 0mm X mm 0 0 RADIAL BLADE HOLDER WITH BLADE KIT Part Number Description # of Tools NKM01016 Radial Blade Holder with Blade Kit 1 Muratec Spring 01: 11
16 MT100 15ST. STATIC RADIAL BLADE HOLDER WITH BLADE KIT Part Number Description # of Tools NKM0106 Radial Blade Holder with Blade Kit 1 AXIAL SINGLE STATIC TOOL 0mm Part Number Description # of Tools Reversible Dimensions B H NKM Axial Single Static Tool 0mm 1 X mm 0 0 Muratec Spring 01: 1
17 MT100 15ST. STATIC AXIAL SINGLE BORING BAR HOLDER H=60mm Part Number Description # of Tools Reversible Cool Thru Ext Cool Dimensions D NKM Axial Single Boring Bar Holder 5mm 1 X X X mm 5 KIT Plug for 5mm BBH to Make Cool Thru AXIAL SINGLE BORING BAR HOLDER H=0mm Part Number Description # of Tools Reversible Cool Thru Ext Cool Dimensions D NKM Axial Single Boring Bar Holder 0mm 1 X X X mm 0 KIT Plug for 0mm BBH to Make Cool Thru Muratec Spring 01: 13
18 ER COLLETS ER COLLET NUMBER DESCRIPTION MD LIST PRICE ER16-SET ER16 Collet Set (11 Collets) $ ERX16-SET ER16 Sealed Collet Set (9 Collets) $ 0.00 ER0 SET ER0 Collet Set (15 Collets) $ 0.00 ERX0-SET ER0 Sealed Collet Set (13 Collets) $ ER5-SET ER5 Collet Set (19 Collets) $ 5.00 ERX5-SET ER5 Sealed Collet Set (1 Collets) $ ER3-SET ER3 Collet Set (1 Collets) $ ERX3-SET ER3 Sealed Collet Set (1 Collets) $ ER40-SET ER40 Collet Set (9 Collets) $ ERX40-SET ER40 Sealed Collet Set ( Collets) $ LIVE TOOL WRENCHES ER COLLET NUMBER DESCRIPTION MD LIST PRICE From List Above ER Collet Wrench (Identify Holder) $.00 From List Above Spindle Locking Wrench (Identify Holder) $.00
19 ( (0-180) ADJUSTABLE ANGLE DRIVEN TOOL 9 (0-180) ADJUSTABLE ANGLE DRIVEN TOOL H=4mm 3-4 A AXIAL DRIVEN TOOL FOR INTERNAL POLYGON-MAKING 8 H=60mm AXIAL DRIVEN TOOL H=100mm AXIAL DRIVEN TOOL H=60mm 6 AXIAL GEARED-UP 1: DRIVEN TOOL AXIAL MTSK-3 DRIVEN TOOL H=60mm AXIAL OPPOSITE FACE TWIN DRIVEN TOOL H=60mm 8 AXIAL SINGLE BORING BAR HOLDER H=60mm 13 AXIAL SINGLE BORING BAR HOLDER H=0mm 13 AXIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y 8 AXIAL SINGLE STATIC TOOL 0mm 1 B BROACHING/SLOTTING DRIVEN TOOL 5mm STROKE H=65mm 10 D DRIVEN 1-10 DRIVEN GEAR HOBBER 9 M MD60 - MD10 4 MT100 15ST MT1 - MT R RADIAL BLADE HOLDER WITH BLADE KIT 11 RADIAL BLADE HOLDER WITH BLADE KIT 1 RADIAL DOUBLE STATIC TOOL 0mm 11 RADIAL DRIVEN TOOL 1, 4 RADIAL MTSK-3 DRIVEN TOOL 5 RADIAL REINFORCED DRIVEN TOOL 5 RADIAL SINGLE SIDE TWIN HEAD DRIVEN TOOL IN Y 6 RADIAL SINGLE STATIC TOOL 0mm 11 S STATIC Table of Contents Alphabetized Listing
20 Table of Contents Part Number Index K KIT KIT M MUR MUR MUR MUR00305 MUR00303 MUR MUR MUR MUR MUR00305 MUR00305 MUR MUR MUR00405 MUR00403 MUR MUR MUR MUR MUR MUR00505 MUR00503 MUR MUR MUR MUR MUR MUR MUR00016 N NKM NKM NKM NKM NKM01016 NKM0106 NKM NKM NKM00016 NKM04015 NKM0405 NKM04050 NKM04060 NKM04161 NKM0419 NKM06405 NKM NKM NKM06905 NKM NKM NKM NKM01010 NKM01015 NKM01011 NKM0100 NKM0105 NKM01030 NKM01040 Plug for 5mm BBH to Make Cool Thru Plug for 0mm BBH to Make Cool Thru Axial Driven Tool ER5 Axial Driven Tool ER3 Axial Driven Tool ER40 Axial Driven Tool ER5 Cool Thru Axial Driven Tool ER3 Cool Thru Axial Driven Tool ER40 Cool Thru Axial Driven Tool ERA5 Axial Driven Tool ERA5 Cool Thru Axial Driven Tool 16x1mm Axial Driven Tool x19mm Axial Driven Tool x1mm Radial Driven Tool ER5 Radial Driven Tool ER3 Radial Driven Tool ER5 Cool Thru Radial Driven Tool ER3 Cool Thru Radial Driven Tool ERA5 Radial Driven Tool ERA5 Cool Thru Radial Driven Tool 16x1mm Radial Driven Tool ER5 Radial Driven Tool ER3 Radial Driven Tool ER5 Cool Thru Radial Driven Tool ER3 Cool Thru Radial Driven Tool ERA5 Radial Driven Tool ERA5 Cool Thru Radial Driven Tool 16x1mm (0-180) Adj. Angle Driven Tool ERA16 (0-180) Adj. Angle Driven Tool ERA16 Cool Thru (0-180) Adj. Angle Driven Tool ERA16 (0-180) Adj. Angle Driven Tool ERA16 Cool Thru Axial Single Boring Bar Holder 5mm Axial Single Boring Bar Holder 0mm Radial Double Static Tool 0mm Radial Single Static Tool 0mm Radial Blade Holder with Blade Kit Radial Blade Holder with Blade Kit Axial Single Static Tool 0mm Radial Single Side Twin Head ERA16 Axial Single Side Twin Head Driven Tool ERA16 Axial Driven Tool ER5 Axial Driven Tool ER5 Cool Thru Axial Driven Tool ERA0 Axial Driven Tool ERA0 Cool Thru Axial Driven Tool 16x1mm Axial Driven Tool x19mm Axial Opposite Face Twin Driven Tool ER5+ER5 (0-180) Adj. Angle Driven Tool ERA16 Radial Driven Tool ER5 Radial Driven Tool ER5 Cool Thru Radial Driven Tool ERA0 Radial Driven Tool ERA0 Cool Thru Axial Geared-Up 1: Driven Tool ER11 Axial Geared-Up 1: Driven Tool ER0 Axial Geared-Up 1: Driven Tool ER5 Axial Geared-Up 1: Driven Tool ER11 Cool Thru Axial Geared-Up 1: Driven Tool ER0 Cool Thru Axial Geared-Up 1: Driven Tool ER5 Cool Thru Axial Geared-Up 1: Driven Tool ERA0 Axial Geared-Up 1: Driven Tool ERA NKM01040 Cool Thru NKM Gear Hobber 1:1 D=08 NKM Gear Hobber 1:1 D=10 NKM Gear Hobber 1:1 D=13 NKM Gear Hobber 1:1 D=16 NKM10108 Gear Hobber :1 Geared Down D=08 NKM10110 Gear Hobber :1 Geared Down D=10 NKM10113 Gear Hobber :1 Geared Down D=13 NKM10116 Gear Hobber :1 Geared Down D=16 NKM Radial MTSK-3 Driven Tool NKM11903 Radial MTSK-3 Driven Tool Cool Thru NKM10013 Axial MTSK-3 Driven Tool NKM1003 Axial MTSK-3 Driven Tool Cool Thru NKM11000 Broaching/Slotting Driven Tool 5mm Stroke NKM Axial Driven Tool for Internal Polygon Weldon 8 NKM Axial Driven Tool for Internal Polygon Weldon 10 NKM Axial Driven Tool for Internal Polygon Weldon 1 NKM Axial Driven Tool for Internal Polygon Weldon 16 NKM Axial Driven Tool for Internal Polygon ER
DRIVEN and STATIC TOOLING For EMAG
1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877-91-TOOLS ( 810-6-4446 ) FAX: 877-9-TOOLS ( 810-6-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com DRIVEN and STATIC TOOLING For EMAG Live Tooling
More informationTW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG
Nakamura-Tome TW Series: TW-10, TW-20 DRIVEN AND STATIC TOOLING CATALOG 1019 BERGIN RD. HOWELL, MI 4884 PHONE : 877 91 TOOLS ( 810 62 4446 ) FAX: 877 92 TOOLS ( 810 62 4467 ) EMAIL: info@mdtooling.com
More informationDRIVEN and STATIC TOOLING For DOOSAN BMT45
DRIVEN and STATIC TOOLING For DOOSAN BMT45 039 BERGIN RD. HOWELL, MI 48843 PHONE : 877-9-TOOLS ( 80-632-4446 ) FAX: 877-92-TOOLS ( 80-632-4467 ) EMAIL: info@mdtooling.com WEBSITE: www.mdtooling.com June
More informationPRECI-FLEX HAAS. The Flexible Tool System. EXSYS Tool, Inc. T: P: P:
PRECI-FLEX The Flexible Tool System HAAS EXSYS Tool, Inc. T:800.397.9748 P:352.588.4345 P:352.588.4821 www.exsys-tool.com About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 (shaft diameters
More informationJuly 2018 ONLY FOR LU3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LU3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest
More informationJuly 2017 TOOLING FOR GENOS L300/L3000 BMT. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR July 2017 GENOS L300/L3000 BMT www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest
More informationAbout Us HAAS Tooling for CNC Turning Centers
About Us WHO IS EPPINGER? Eppinger CNC tool holders to DIN 69880 are manufactured to precision levels far in excess of the required standards using advanced, patented produciton systems and facilities.
More informationAugust 2018 ONLY FOR MULTUS U3000/U4000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA August 2018 MULTUS U3000/U4000/U5000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the
More informationApril 2017 TOOLING FOR MULTUS U3000/U A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 MULTUS U3000/U4000 www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationOctober 2017 TOOLING FOR LB2000/LB3000 M/MY/MYW. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR October 2017 LB2000/LB3000 M/MY/MYW www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory
More informationJuly 2018 ONLY FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationHeimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested in 12
1987 1988 1997 2001 2003 2006 2007 2008 2010 2012 2014 2015 Heimatec Automations was founded Started designing, assembling, and marketing Live Tools Started in house manufacturing of components Invested
More informationJuly 2018 ONLY FOR LT2000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
ONLY FOR OKUMA July 2018 LT2000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling: Only for Okuma Velocity Products has the largest inventory
More informationApril 2017 TOOLING FOR LT3000 M/MY. A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty
TOOLING FOR April 2017 LT3000 M/MY www.velocityproducts.com A Complete Lineup of In-Stock Tooling for Okuma Two Year Warranty Velocity Tooling for OKUMA Velocity Products has the largest inventory of lathe
More informationStatic & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB2500EX, LB3000EX, LB4000EX, GENOS L300-MW
Static & Live Tooling OKUMA LB EX SERIES LATHES LB2000EX, LB20EX, LB3000EX, LB4000EX, GENOS L300-MW Special Live Tool Inquiry Form Fax: (847) 367-481 Email: inquiries@lyndexnikken.com Fill in the form
More informationBMT LIVE & STATIC TOOLING
BMT LIVE & STATIC TOOLING 3.937 100 1.535 BOLT MOUNTED TURRET 45/55/65 SERIES LATHES 2.283 58 2.717 69 2.555 64.90 2.795 71 3.268 83 4.898 124.40 1.535 1.535 3.228 82 2.717 69 1.260 32 0.213 5.40 3.835
More informationNAKAMURA TOME LIVE TOOLING
NAKAMURA TOME LIVE TOOLING YEARS Uncompromising Quality Unparalleled Precision Part No./ Lyndex-Nikken Nakamura Coolant- Thru High- Nakamura Tome Models Speed NTJ NTM3 NTY3 SC-150II SC-200L SC-250 NK103-11000
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 Includes Tools 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Lathe Tooling
More informationTooling for Swiss Automatics
Tooling for Swiss Automatics MANUFACTURED IN SWITZERLAND Swiss Precision Tools I S O 9 0 0 1 CERTIFIED SWISS PRECISION SWISS QUALITY Providing tolerances unmatched in the industry TIR (in) REGO-FIX Cylindrical
More informationDOOSAN LIVE & STATIC TOOLING
DOOSAN LIVE & STATIC TOOLING 100 39 PUMA SERIES LATHES 2.283 58 2.717 69 2.795 71 68 3 1.535 39 1.535 39 4.898 124.40 3.228 82 2.717 69 1.260 32 0.213 5.40 CAT2016-DOOSAN-LT OCTOBER 2016 0.276 7 847-367-4800
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
Alberti LIVE TOOLS 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com Alberti
More informationPRECI-FLEX. The Flexible Tool System
PRECI-FLEX The Flexible Tool System EXSYS Tool, Inc. T:800.397.9748 F:800.397.9739 P:352.588.4345 www.mazaktooling.com CONTACT INFORMATION TABLE OF CONTENTS Main Distribution for USA Mexico Canada Repair
More informationCNC TURNING CENTRES B650-M-SM-Y-YS B658-M-SM-Y-YS
CNC TURNING CENTRES B6-M-SM-Y-YS B658-M-SM-Y-YS Cutting edge technology and unequalled productivity. B6-B658 2-3 Machine configurations. The re-styled B6/B658 series represents the state of the art of
More informationOperation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation. Figure l
Operation and Maintenance Manual Titespot Coolant Driven Angle Heads Eltool Corporation Major Components Figure l Basic Operation: High pressure coolant enters the Titespot Angle Head and drives an integral
More informationAlberti LIVE TOOLS. 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12
LIVE 77 40 117 184 55 16 ATTACCO DIN 5480 W16x0.8x30x18/9b 12 67 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com STRAIGHT 90 DUAL OUTPUT
More informationSERIES 36-AM & BD...4-5 SERIES 36-AM-RA & BD RA...6-7 SERIES 50-AM & BD...8-9 SERIES 36 TOOL CHANGER...10-11 SERIES 50-TOOL CHANGER...12-13 SERVO MOTOR ADAPTERS...14-15...16-17...18-19 COLLET NUT...19
More informationBEST OF 2014 January December
Best of 2014 BEST OF 2014 January December 2405 K POWER CHUCK 3274 SELF-CENTRING SCROLL CHUCK 3 JAW 3, 60o serrations, through hole. Interchangeable with Kitagawa type B-200 Cast iron, plain back, front
More informationSpindle & Taper Care Products
Spindle & Taper Care Products Swiss Precision Tools UltraSonic Cleaner Ultrasonic Cleaner Ultrasonic Cleaning Solution US-40SE US-815CLEAN Heavy duty stainless steel double-wall design provides highly
More informationMultiLine MS16C. CNC Multi-Spindle Automatic Lathe
MultiLine MS16C CNC Multi-Spindle Automatic Lathe MultiLine MS16C CNC multi-spindle machine: More dynamics, less secondary times! The MS16C combines the flexibility of modern INDEX CNC multi-spindle technology
More informationTOOLING KITS. July 2018 INCLUDES OKUMA TOOLING COMMONALITY CHARTS!
INCLUDES OKUMA TOOLING COMMONALITY CHARTS! July 08 TOOLING KITS www.velocityproducts.com A Complete Lineup of In-Stock Lathe Tooling for Okuma Two Year Warranty VELOCITY TOOLING KITS Velocity Tooling:
More informationBEST OF 2015 January December
BISON opens its new manufacturing facility improving quality and service 53,000 sq. metre site 33,600 sq. metre of manufacturing State of the art design and manufacturing under one roof BEST OF 2015 January
More informationROYAL LOW-PROFILE ACCU-LENGTH CNC COLLET CHUCKS
ROYAL LOW-PROFILE ACCU-LENGTH High RPM All Royal CNC collet chucks are balanced by design for high-speed operation, and can often be run at higher speeds than conventional 3-jaw chucks because they are
More informationDriven & Static Tooling Citizen
Driven & Static Tooling Driven & Static Tooling 3 Table of Contents Tooling K12 & K16 Driven Tools.... 3 M20, M32 Series 3 Driven Tools.... 4 M20, M32 Series 3 Static Tools... 7 M32 Series 5 Only Driven
More informationANGLE HEADS & SPINDLE SPEEDERS
& SPINDLE SPEEDERS RIGHT GFX07 ER 11 Fixed 90º Right Angle Heads 116 GFX07L ER 11 Fixed 90º Right Angle Heads 117 GFX10 ER 16 Fixed 90º Right Angle Heads 118 GFX10L ER 16 Fixed 90º Right Angle Heads 119
More informationDXG 100 CNC Chucker with Gantry Robot
DXG 100 CNC Chucker with Gantry Robot jyoti. co.in DXG 100 CNC Chucker with Gantry Robot OVERVIEW DXG 100 is developed by considering industry requirement of small disc - type precision components in huge
More informationw w w. m a r v e l s a w s. c o m
Quality Machines by Vertical Band Saws Series 8 Mark III Miter cuts up to 60 with optional power column tilt. Column adjustable from 90 to 3 canted. Capacity: 18 X 22 (457mm x 560mm) at 45 18 x 14.5 R,
More informationDesigned for Automatic Tool Change Machines
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationWe do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads»
» Cutting Tools» Angle Heads» We do Specials! We do Specials! Manufacturer of Precision Tools since 1974 We do Specials! mimatic Special Solutions» Cutting Tools» Angle Heads» Table of Contents Cutting
More informationBT/ER TOOLHOLDERS COLLETHOLDERS 7-4. Supplied with: Colletholder and clamping nut. Balancing Rings. Drawing. D1 [mm] Plane 1. L1 [mm] L2 [mm] Plane 2
/ER MAS 3 Form A+AD D [mm] D [mm] 30/ER 6 x 0 H 30.6 69. 5 5. 5 FRW 5 30/ER 6 x H 30.65 5 7. 5 FWR 5 30/ER 5 x 0 H 3 0 3 6. 5. -- FWR 35 30/ER 5 x H 35 0 3 88. 5 -- FWR 35 30/ER 3 x 0 30.3 0 7. 3 30/ER
More informationGMS SERIES Tool Spindle Type 5-axis Turning Centers
GMS SERIES Tool Spindle Type -axis Turning Centers BRAND NEW MULTI-TASKING MACHINING TECHNOLOGY The tooling spindle and turret can support twin spindle machining. Special tooling system design to provide
More informationHIGH TORQUE LIVE TOOLS
HIGH TORQUE LIVE TOOLS Mori Seiki NLX 4000 High Torque Live Tools Fax: (847) 367-4815 Email: inquiries@lyndexnikken.com Fill in the form below and fax it to (847) 367-4815, or visit www.lyndexnikken.com
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are your
More informationBEST OF A selection of our most popular products. To view the complete range visit
BEST OF 2016 January December A selection of our most popular products To view the complete range visit /products Welcome to BISON Empowered By Precision BISON opens new manufacturing facility making it
More informationANGLE HEADS. Design. The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life
TC Series Designed for utomatic Tool Change Machines Design The compact design, along with mentioned specifications allows for the highest performances, high speeds and long tool life Case Hardened and
More informationBILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & Accessories BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD. Leitz Metalworking Technology Group
BILZ TOOL CO., INC. CNC-2007 Rotating Toolholders & ccessories Leitz Metalworking Technology Group BELIN BILZ BOEHLERIT FETTE KIENINGER ONSRUD CNC Toolholders C O N T E N T S Introduction 3 CT40 CT40
More informationTHe BeST OF THe BeST OF NeW. NeW. NeW. empowered. by precision. empowered. empowered precision. A selection of our most popular products
THe BeST OF 2017 A selection of our most popular products THe BeST OF 2017 AA selection selection of of our our most most popular popular products products To view the complete complete range range visit
More informationPneumatic spindles Pneumatic built-in motors
Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial
More informationDriven Toolholders for MAZAK Machines
Driven Toolholders for MAZAK Machines We do Specials! Manufacturer of Precision Tools since 1974 Table of Contents Type Page Driven Toolholders QTNX 100 + SQT 10 8-15 QTNX 200 / 250 + SQT 15 + SQ 200 /
More informationEVOLUTION LINE ANGLE HEADS
EVOLUTION LINE NGLE HEDS by History 1948 Parlec is established in Rochester N.Y., as a job shop specializing in the 1973 Parlec begins producing and distributing the Numertap and utofacer 1977 Parlec expands
More informationMetalworking ETP HYDRO-GRIP. Achieve Excellence through Simplicity. Hydraulic high precision toolholders
Metalworking ETP HYDRO-GRIP Hydraulic high precision toolholders Achieve Excellence through Simplicity 2017 ETP HYDRO-GRIP Hydraulic high precision toolholders HYDRO-GRIP high precision tool holders are
More informationBMT 65 TOOLING BENZTOOLING.COM
BMT 65 TOOLING BENZTOOLING.COM Table of Contents Output Spindle Options Page 2 BENZ LinA Broach Page 4 & 11 Quick Change Options Page 3 & 14 Axial Live s Page 5 Offset Axial Live s Page 6 Radial Live s
More informationMULTITURRET BAR TURNING B436Y2
MULTITURRET BAR TURNING B436Y2 B436Y2 The range of QUATTRO machines have been produced by Biglia since 1990 and celebrating the third generation is now further enhanced by the B436Y2 model. This new model
More informationPneumatic spindles Pneumatic built-in motors
Pneumatic spindles Pneumatic built-in motors MANNESMANN DEMAG Always one step ahead Intelligent solutions to save time and costs As an insider you know that being at the cutting edge of automation is crucial
More informationROTARY TABLE SELECTION GUIDE
ROTARY TABLE SELECTION GUIDE 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com KOMA PRECISION, Inc. corporate facility located in East Windsor,
More informationAlberti TURBODRILL/TURBOFLEX Ø25 Ø80 ER40 3/30
350 5 TURBODRILL/TURBOFLEX 139 79 53 11 184 0 10 Ø25 Ø80 86 ER40 3/30 131 20 Thompson Rd East Windsor CT 06088 1.800.249.5662 860.623.4132 Fax www.komaprecision.com info@komaprecision.com TURBODRILL &
More informationOperation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation
Operation and Maintenance Manual Titespot Livetool Angle Heads Eltool Corporation General The Eltool Livetool Angle Heads can provide years of service if properly used and maintained. The Livetool uses
More informationB0325B-II & B0326-II. CNC Precision Automatic Lathe. Speed, Accuracy, Rigidity
B0325B-II & B0326-II CNC Precision Automatic Lathe Speed, Accuracy, Rigidity 32 mm Capacity Swissturn Designed For Superior Flexibility Electronic Integral Motor Guide Bushing Easy Access Tool Zone Sub
More informationRFC SPECIALTY LOCKING DEVICES
RINGFEDER Products are available from MARYLAND METRICS P.O. Box 261 Owings Mills, MD 21117 USA email: sales@mdmetric.com web: http://mdmetric.com phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142
More informationFOR QUALITY, VALUE AND SERVICE CALL YOUR KAR DISTRIBUTOR TODAY!
INTROUCTORY OFFER CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse Adapters Boring Bar Blanks Tightening Fixtures Universal H/V CNC
More informationAccessories, spare parts and measuring equipment
Accessories, spare parts and measuring equipment The broad range of accessories, spare parts and measuring equipment represents a useful addition to the range of actual clamping tools and offers spare
More informationMaintenance Instructions. World Leader in Modular Torque Limiters. JSE AEA Extruder Clutch
World Leader in Modular Torque Limiters PROTECTING EQUIPMENT& MACHINERYYEARSInstallation and Maintenance Instructions JSE.5-0234AEA Extruder Clutch 1304 Twin Oaks Street Wichita Falls, Texas 76302 (940)
More informationItem no. Initial size D1
Efficient production of bores accurate in dimensions and design on single-spindle and multi-spindle machines. RÖHM designed special floating chucks for reamers with internal coolant supply. The tool locating
More informationCOATING SELECTION CHART
On the Cutting Edge... at Whitney Tool! Whitney Tool is recognized as a leading manufacturer of Woodruff style slotting and keyseat milling cutters, as well as Counterbores, Counterbore pilots, T-Slot,
More informationStub Mill Holders, Boring Head, Blank Bar
Stub Mill Holders, Boring Head, Blank Bar Current Promotion Scan these QR Codes Featured Video 119 Stub Mill Holders Stub Mill Holder Features Our Stub Mill Holders feature hardened and ground tapers,
More informationGTS SERIES. Twin Spindles & Turrets CNC Turning Centers
GTS SERIES Twin Spindles & Turrets CNC Turning Centers GTS series GTS series Twin Turrets TWIN SPINDLES & TURRETS CNC TURNING CENTER General Features Accessories & Applications Designed for simultaneous
More informationWherever you are there is a qualified service engineer available to meet your service needs.
Amera-Seiki service is begins with its nationwide chain of dealers, factory trained and well educated in its machine tools. As well, Amera Seiki fields a full complement of factory direct engineers covering
More informationUniversal. CNC Turning machine TNA500 TNA600
Universal CNC Turning machine TNA500 TNA600 TRAUB TNA this name is highly regarded throughout the world for machining large chuck, shaft or bar parts. With their precision and efficiency, short setup time
More informationURAI ROTARY POSITIVE BLOWERS/EXHAUSTERS
URAI ROTARY POSITIVE BLOWERS/EXHAUSTERS B-12X95 October 2004 Versatile, reliable ROOTS Universal RAI blower fits your application Remarkably adaptable You can mount the Universal RAI blower upside down
More informationClimax Valve Repair Machines
VM7000 VM6000 VM8000 Climax Valve Repair Machines descriptions specifications operational dimensions components CLIMAX Portable Machine Tools, Inc. 6/00 1 Model VM7000 Valve Boring Machine Now you can
More informationCAT Shank Tools & Tightening Fixtures
INUSTRIA INC. TORONTO MONTRÉA EMONTON www.kar.ca CAT Shank Tools & Tightening Fixtures CAT Shank Tools ER Collet Chucks End Mill Holders Shell Mill Adapters Jacobs Adapters Integral Shank rill Chucks Morse
More informationDME Edge Mold Bases THE LOWEST-PRICED MOLD BASE ON THE MARKET IS IN STOCK IN 70 DIFFERENT SIZES. D-M-E Edge Mold Bases
DME Edge Mold Bases THE LOWEST-PRICED MOLD BASE ON THE MARKET IS IN STOCK IN 70 DIFFERENT SIZES D-M-E Edge Mold Bases 16 Edge Mold Bases Providing a Competitive Advantage THE NEW EDGE MOLD BASE GIVES YOUR
More informationTable of Contents. To place an order, please contact: Keith Clendenin; cell ph. (860)
Rev. Date 5/10/2016 Table of Contents Standard Products...3 Back Working Drill Holders...4 Bar Feed Brackets...5 Reducer Bushings...6 Chucker Kits...8 Coolant/Air Blast Manifolds...9 Thru-Coolant ER Collet
More information1000 SERIES VERTICAL GRINDING MACHINES
Product Catalog Vertical Grinders 1000 SERIES VERTICAL GRINDING MACHINES The CGC Model 1000 is the core of Campbell Grinder Company s modular machine philosophy. High performance, reliability, and v ersatility
More informationHaas Factory Outlet 2013 PERFORMANCE ACCESSORY CATALOG
2013 PERFORMANCE ACCESSORY CATALOG Contents Haas ST-10................................................................... Page 1 Haas ST-20 All Versions.......................................................
More informationI.T ODT-N * series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION ISSUED
series 50 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 1809 COUPLING TECHNICAL INFORMATION I.T. 6482 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED 06-09
More informationPLASTICS INDEX...L-1 PLASTIC CAPABILITIES...L-2
Index SECTION L PRODUCT PAGE INDEX...L-1 PLASTIC CAPABILITIES...L-2 SECTION I NON-METALLIC SPROCKETS...L-3 - L-12 Sprockets - Stock No. 25 1/4" Pitch...L-3 No. 35 3/8" Pitch...L-4 No. 40 1/2" Pitch...L-5
More informationSwiss Automatic Tooling
Swiss Automatic Tooling 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 Metallic Sealed Collets
More informationVARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY.
PM4200 MILLING MACHINE VARIABLE BED LENGTHS AND MILLING HEAD OPTIONS OFFER ENHANCED VERSATILITY. Quality Machine Design with Power-Packed Performance Precision machined dovetail ways and adjustable gibs
More informationGTX Multi-tasking Turning Centers SERIES
GTX-2000 Multi-tasking Turning Centers SERIES Brand New Multi-Tasking Machining Technology New twin spindle and twin turret combination Upper and lower turret can be adjusted based on different machining
More informationPERFORMANCE : VALUE PRODUCT CATALOG
PERFORMANCE : VALUE by P a r t n e r s i n P r o d u c t i v i t y PRODUCT CATALOG PERFORMANCE : VALUE A Leading Global Producer FEELER is a leading global producer of numerically controlled machine tools
More informationER Collets Nuts Disks
Collets Nuts Disks 1 Collets - Features Benefits 2 Concentricity T.I.R. 3 Assembly Instructions 4 8 8-UP 8-MB 5 11 11-UP 11-MB 11-ND 6 16 16-UP 16-MB 7 20 20-UP 8 25 25-UP 9 32 32-UP 10 40 40-UP 12 50
More informationSlow Speed Centers. For Conventional & Slow Speed Lathes. Revolving Center : Plain Point EXTRA HEAVY DUTY FOUR BEARING
LIST EFFECTIVE FROM DATE : 01/07/2018 Slow Speed Centers TURNMAX MACHINE TOOLS - E-mail:sales@turnmax.in / turnmaxsales@gmail.com DATE : 01/07/2018 For Conventional & Slow Speed Lathes. Revolving Center
More informationVertical Machining Center. Vertical Machining Center.
Vertical Machining Center www.toyoda.com Corporate Headquarters 316 W. University Drive Arlington Heights, IL 60004 Tel: (847) 253-0340 Fax: (847) 253-0540 E-mail: info@toyoda.com Toyoda Northeast Tech
More informationWe set the standard for the highest precision and most advanced technology in the machine tool accessory market
ANGLE HEADS heimatec GmbH-Renchen, Germany Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility, on 7.5 acres, is home to over 100
More informationCONTENTS. GRIP TIGHT Adapter Ball Bearings
CONTENTS GRIP TIGHT Adapter Ball Bearings Features / Benefits.................................................... B2-2 How to Order / Nomenclature............................................ B2-4 Selection............................................................
More information1-800-D-DURANT or for your nearest metal stamping distributor.
NEW Durant Tool Company Manufacturers of Exhibit Display, Factory Automation & Packaging Turntables Good Morning! Here is your special copy of the completely new, full color DURANT TOOL Turntable Catalog,
More informationw w w. j y o t i. c o. i n Performance Series Vertical Machining Center
w w w. j y o t i. c o. i n Performance Series Vertical Machining Center Performance Series Vertical Machining Center Overview To match the demand of greater accuracy and total reliability at higher speeds
More informationBNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA
BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,
More information2018 PRODUCT GUIDE. High Pressure Coolant Systems Chillers & Mist Collection Options & Accessories. Demand Quality Insist on MP Systems
2018 PRODUCT GUIDE High Pressure Coolant Systems Chillers & Mist Collection Options & Accessories Demand Quality Insist on MP Systems More Dependable by Design MP Systems high pressure coolant systems
More informationTyphoon B Series CNC Turning Centres
Typhoon B Series CNC Turning Centres www.colchester.co.uk Typhoon B Series CNC Turning Centres The Typhoon B Series constructed from a one piece cast, base incorporates FEM analysis to achieve an optimal
More informationClamping Tools
Clamping Tools Drill chuck Tapping chuck/ tapping machines Taper bore tools HSK inserts Tool holder for lathes Tool pre-setter 1 1.3 1.8 Reduction sleeves Spindle Sleeves Ejector Drifts Adapter sleeves
More informationE and VE Construction
E and VE Construction E Element VE Element Type E and VE elements combine rugged design and rigid construction features which make them ideal for moderate to heavy duty clutch and brake service. They are
More informationACTUATORS GENERAL CATALOG
CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG ROTARY ACTUATORS VANE TYPE SERIES CONTENTS RAN (Standard Type) Basic Model and Configuration 259 Specifications 26 Order Codes 264 Dimensions
More informationTyphoon L Series CNC Turning Centres
Typhoon L Series CNC Turning Centres www.colchester.co.uk Typhoon L Series CNC Turning Centres The Typhoon Series constructed from a one piece cast base, incorporates FEM analysis to achieve an optimal
More informationI.T MDT * series 20 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 5480 / 5482 COUPLING TECHNICAL INFORMATION ISSUED
series 2 MODULAR DRIVEN TOOL DEVICE FOR AXIAL SYSTEM DIN 548 / 5482 COUPLING TECHNICAL INFORMATION I.T. 6486 GB The data given in the I.T. are subject to technical modifications without notice. ISSUED
More informationDRILL PRESSES. Mechanical Variable Speeds rpm Electronic Variable Speeds rpm CNC Power Feed EVS Speeds rpm
DRILL PRESSES PRODUCT CATALOG www.clausing-industrial.com 800.323.0972 DRILL PRESSES Mechanical Variable Speeds 150 2000rpm Electronic Variable Speeds 50 2000rpm CNC Power Feed EVS Speeds 50 2000 rpm 20
More informationCTR Counterboring Tools
CTR Counterboring Tools Primary Application Designed for high production screw head counterbores and similar counterboring operations. The S2 S inserts produce a precise 90 bottom. The ground radial land
More informationSG9MTS Cylinder Head Seat & Guide Machine
SG9MTS Cylinder Head Seat & Guide Machine The Speed of Live and the Accuracy of Fixed Machining Equipment Created for Performance Racing & Engine Remanufacturing. So Advanced, It s Simple. SG9MTSMTS CYLINDER
More informationIndustries, Inc. Reduce Costs, Shrink Your Footprint.
SP Industries, Inc. Reduce Costs, Shrink Your Footprint. The Future of Metal Recycling SP Industries manufactures high quality systems with your company's future and the future of our environment in mind.
More informationFeatures Benefits. Toolholders. Swiss Quality Made in Switzerland to ISO 9001/ISO Marking Type and part number.
Swiss Precision Tools ER Features Benefits Swiss Quality Made in Switzerland to ISO 00/ISO 400. Marking Type and part number. Traceability Lot number marking on all products for traceability through the
More information