ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 14025, ISO and EN 15804

Transcription

1 ver1 215 ENVIRONMENTAL PRODUCT DECLARATION in accordance with ISO 1425, ISO 2193 and EN 1584 Owner of the declaration: Program operator: Publisher: Declaration number: Ab Rani Plast Oy The Norwegian EPD Foundation The Norwegian EPD Foundation NEPD EN Issue date: Valid to: RaniMoBar Ab Rani Plast Oy Logo Only a picture or corresponding graphics shall be inserted showing the product or the use of the product. NB! Images must be high resolution (clear and sharp) with dimensions 22cm 21 cm. NEPD EN RaniMoBar

2 General information Product: RaniMoBar Owner of the declaration: Ab Rani Plast Oy Contact person: Johan Björk Phone: johan.bjork@raniplast.com Program operator: Næringslivets Stiftelse for miljødeklarasjoner Manufacturer: Ab Rani Plast Oy P.O. Bo 525 Majorstuen, N-33 Oslo Norway Fabriksvägen 6, FI-687 Terijärv Finland Phone: Phone: post@epd-norge.no raniplast@raniplast.com Declaration number: Place of production: Teerijärvi factory, Ranivägen 185, FI-687 Terijärv Finland ECO Platform reference number: Management system: ISO 91, ISO 141 This declaration is based on Product Category Rules: CEN Standard EN 1584:212+A1:213 serves as core PCR. NPCR 22 Rev 1 Roof waterproofing Organisation no: Statement of liability: The owner of the declaration shall be liable for the underlying information and evidence. EPD Norway shall not be liable with respect to manufacturerinformation, life cycle assessment data and evidences. Issue date: Valid to: Declared unit: Year of study: 1 m2 of ready-to-use plastic film. 216 Declared unit with option: Comparability: EPD of construction products may not be comparable if they not comply with EN 1584 and seen in a building contet. Functional unit: The EPD has been worked out by: 1 m2 of installed plastic film with a refernce service life Thomas Andersson of 6 years. Ecobio Oy Verification: The CEN Norm EN 1584 serves as the core PCR. Independent verification of the declaration and data, according to ISO1425:21 internal Third party verifier: eternal Approved (Independent verifier approved by EPD Norway) NEPD EN RaniMoBar 2/8

3 Product Product description: RaniMoBar plastic film is a plastic sheet for damp proofing. The RaniMoBar plastic film is used as such for moisture control in constructions and can be applied to floors, walls and roofs to prevent moisture from passing into the interior spaces. Product specification: The plastic film is produced in three different thicknesses;,12 mm,,15 mm and,2 mm. Materials Polyetylen Masterbatch (for color).11*.1* % > 99,5 <.5 Technical data:,111 /m2 for,12 mm thickness,138 /m2 for,15 mm thickness,185 /m2 for,2 mm thickness CE - EN 13984:213, VTT - Technical Research Center of Finland. P - 389/9, SP - Technical Research Institute of Sweden. SINTEF - TG 221, Byggforsk Norway. Market: Nordic countries Reference service life, product: 6 years Reference service life, building: *.12 mm 6 years LCA: Calculation rules Declared unit: 1 m2 of ready-to-use plastic film. System boundary: Cradle-to-grave, module D not declared. Data quality: Specific data: production at Ab Rani Plast Oy (214) Generic data: upstream and downstream processes, ecoinvent 3.2 (216) Allocation: The allocation is made in accordance with the provisions of EN Incoming energy and water and waste production inhouse is allocated equally among all products through mass allocation. Effects of primary production of recycled materials allocated to the main product in which the material was used. The recycling process and transportation of the material is allocated to this analysis. Cut-off criteria: All major raw materials and all the essential energy is included. The production process for raw materials and energy flows that are included with very small amounts (<1%) are not included. This cut-off rule does not apply for hazardous materials and substances. NEPD EN RaniMoBar 3/8

4 LCA: Scenarios and additional technical information The following information describe the scenarios in the different modules of the EPD. Transport from production place to user (A4) Type Capacity utilisation (incl. return) % Truck 37 % (ecoinvent 3.2) Railway - Boat 65 % (ecoinvent 3.2) <Other Transportation> Type of vehicle Distance km Fuel/Energy consumption (l/t) lorry, metric ton l/tkm 48 kwh/tkm transoceanic ship l/tkm 1 <> Assembly (A5) Auiliary Water consumption Electricity consumption Other energy carriers Material loss Output materials from waste treatment Dust in the air *.12 mm m 3 kwh.1* Use (B1) Maintenance (B2)/Repair (B3) Replacement (B4)/Refurbishment (B5) Maintenance cycle* Replacement cycle* Auiliary Electricity consumption kwh Other resources Replacement of worn parts Water consumption Electricity consumption Other energy carriers m 3 kwh Material loss * Number or RSL (Reference Service Life) No maintanance, repair or replacement is needed during the lifecycle of the product. Operational energy (B6) and water consumption (B7) Water consumption Electricity consumption Other energy carriers Power output of equipment m 3 kwh kw End of Life (C1, C3, C4) Hazardous waste disposed Collected as mied construction waste Reuse Recycling Energy recovery To landfill *.12 mm No operational energy or water use is required during the lifecycle of the product. Waste treatment and disposal of RaniMoBar plastic film according to Norwegian average treament methods..11* Transport to waste processing (C2) Type Capacity utilisation (incl. return) % Truck 37 % (ecoinvent 3.2) Railway - Boat - <Other Transportation> Type of vehicle lorry, metric ton Distance km 1 Fuel/Energy consumption.5 l/tkm kwh/tkm l/tkm <> (l/t) 5 Transport distance to waste processing or disposal is estimated to be < 1 km from the construction site. Additional technical information There are no harmful substances released to the indoor air during the use of the product. Emission measurement has been done by SP (Technical Research Institute of Sweden) according to ISO NEPD EN RaniMoBar 4/8

5 LCA: Results System boundaries (X=included, MND= module not declared, MNR=module not relevant) Product stage Assemby stage Use stage End of life stage Beyond the system boundaries Raw materials Transport Manufacturing Transport Assembly Use Maintenance Repair Replacement Refurbishment Operational energy use Operational water use De-construction demolition Transport Waste processing Disposal Reuse-Recovery- Recycling-potential A1 A2 A3 A4 A5 B1 B2 B3 B4 B5 B6 B7 C1 C2 C3 C4 D MNR MNR MND Environmental impact -.12 mm Parameter A1- A3 A4 A5 B1-B5 GWP CO 2 -eqv ODP CFC11-eqv 7.5E E E-1 POCP C 2 H 4 -eqv 6.E E E-7 AP SO 2 -eqv EP ADPM ADPE PO 3-4 -eqv Sb-eqv 1.13E E E E E-5 3.9E E E-6 1.9E-9.1 C1 C E E E E E-9.3 C3 C E E E E E-11.2 Environmental impact -.15 mm GWP CO 2 -eqv ODP CFC11-eqv 9.32E E-9 2.3E E E-11 POCP C 2 H 4 -eqv 7.46E E E-7 3.9E E-8 AP SO 2 -eqv 1.4E E E E E-6 EP PO 3-4 -eqv 1.75E E E E E-6 ADPM Sb-eqv 8.6E E E E E-1 ADPE Environmental impact -.2 mm GWP CO 2 -eqv ODP CFC11-eqv 1.25E E-9 3.8E E E-11 POCP C 2 H 4 -eqv 1.E E E E E-8 AP SO 2 -eqv 1.88E E E-5 1.2E E-6 EP PO 3-4 -eqv 2.35E E-5 4.2E E-6 2.2E-6 ADPM Sb-eqv 1.15E-7 6.5E E E E-1 ADPE GWP Global warming potential; ODP Depletion potential of the stratospheric ozone layer; POCP Formation potential of tropospheric photochemical oidants; AP Acidification potential of land and water; EP Eutrophication potential; ADPM Abiotic depletion potential for non fossil resources; ADPE Abiotic depletion potential for fossil resources NEPD EN RaniMoBar 5/8

6 Resource use -.12 mm Parameter A1- A3 A4 A5 B1-B5 C1 C2 RPEE RPEM.37 TPE NRPE NRPM 8.96 TRPE SM RSF NRSF W m 3 Resource use -.15 mm Resource use -.2 mm C3 3.56E E E-5 6.8E E-6 Parameter A1- A3 A4 A5 B1-B5 C1 C2 C3 3.56E-5 RPEE E-5 RPEM.46 TPE E-5 NRPE NRPM TRPE SM RSF NRSF W m E-5 4.E E E-6 RPEE E-5 RPEM.61 TPE E-5 NRPE NRPM TRPE SM RSF NRSF W m E E-5 1.1E-5 3.6E-6 C4 C4 RPEE Renewable primary energy resources used as energy carrier; RPEM Renewable primary energy resources used as raw materials; TPE Total use of renewable primary energy resources; NRPE Non renewable primary energy resources used as energy carrier; NRPM Non renewable primary energy resources used as materials; TRPE Total use of non renewable primary energy resources; SM Use of secondary materials; RSF Use of renewable secondary fuels; NRSF Use of non renewable secondary fuels; W Use of net fresh water NEPD EN RaniMoBar 6/8

7 End of life - Waste -.12 mm Parameter A1- A3 HW NHW RW 4.5E E-5 A4 A5 B1-B5 C1 C2 C3 C4 End of life - Waste -.15 mm HW 5.6E-5 NHW 3.95E-5 RW End of life - Waste -.2 mm HW 6.75E-5 NHW 5.26E-5 RW HW Hazardous waste disposed; NHW Non hazardous waste disposed; RW Radioactive waste disposed End of life - Output flow -.12 mm Parameter A1- A3 A4 B1-B5 CR MR 4.22E-4.15 MER EEE ETE 1.98E-4 4.5E A5 C1 C2 C3 C4 End of life - Output flow -.15 mm CR MR 5.28E MER EEE 2.47E ETE 5.6E End of life - Output flow -.2 mm CR MR 7.4E MER EEE 3.29E ETE 6.75E CR Components for reuse; MR Materials for recycling; MER Materials for energy recovery; EEE Eported electric energy; ETE Eported thermal energy Reading eample: 9, E-3 = 9,*1-3 =,9 NEPD EN RaniMoBar 7/8

8 Additional Norwegian requirements Greenhous gas emission from the use of electricity in the manufacturing phase National production mi from import, low woltage (production of transmission lines, in addition to direct emissions and losses in grid) of applied electricity for the manufacturing prosess(a3). Data source Econinvent v3.2 Amount 231 g CO2-eqv/kWh Dangerous substances The product contains no substances given by the REACH Candidate list or the Norwegian priority list The product contains substances given by the REACH Candidate list or the Norwegian priority list that are less than,1 % by The product contain dangerous substances, more then,1% by weight, given by the REACH Candidate List or the The product contains no substances given by the REACH Candidate list or the Norwegian priority list. The product is classified Name CAS no. Amount Indoor environment There are no harmful substances released to the indoor air during the use of the product. Emission measurement has been done by SP (Technical Research Institute of Sweden) according to ISO Carbon footprint Carbon footprint has not been worked out for the product. Bibliography ISO 1425:21 Environmental labels and declarations - Type III environmental declarations - Principles and procedures ISO 1444:26 Environmental management - Life cycle assessment - Requirements and guidelines EN 1584:212+A1:213 Sustainability of construction works - Environmental product declaration - Core rules for the product category of construction products ISO 2193:27 Sustainability in building construction - Environmental declaration of building products ECOBIO LCA 216 Ab Rani Plast Oy RaniMoBar - Life Cycle Assessment according to ISO 144 and EN 1584 NPCR 22 Rev 1 Roof waterproofing Program operator 7KH 1RUZHJLDQ (3' )RXQGDWLRQ 3RVW %R[ DMRUVWXHQ 2VOR 1RUZD\ Publisher The Norwegian EPD Foundation Post Bo 525 Majorstuen, 33 Oslo Norway Owner of the declaration Ab Rani Palst Oy Fabriksvägen 6, FI-687 Terijärv Finland Author of the Life Cycle Assessment Ecobio Oy Runeberginkatu 4c B21 FI-1 Helsinki, Finland NEPD EN RaniMoBar Phone: SRVW#HSG QRUJH QR web ZZZ HSG QRUJH QR Phone: web Phone: Fa web Phone: Fa web post@epd-norge.no raniplast@raniplast.com info@ecobio.fi 8/8