Ball valve C 10 valve ball completely moulded in place, extremely low clearance volume, high k v value

Transcription

1 Ball valve C 0 valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and cannot be flushed out high operating reliability - high torque transmission due to generously dimensioned stem extremely low clearance volume - the body encloses the ball due to the special die casting method optimised kv value - for all s, the internal ball diameter is constructively adapted to the internal pipe diameter one-piece body Application chemical plants industrial plants water treatment electroplating plants Utilisation for shutting off pipeline systems Flow Media Neutral and aggressive fluid or gaseous media free of solid particles, provided that the valve components coming into contact with the media are resistant at the operating temperature in accordance with the ASV resistance guide. Testing Requirements and tests/inspections according to DIN 3, 3 and DIN EN 66, leakage rate A tested. Nominal Pressure (H O, 0 C) PN 0 Fluid Temperature see pressure/temperature diagram Operating Pressure see pressure/temperature diagram Size DN 5 - DN 50 Body Ball PE Ball Seat Sealing Actuation with T-handle, simultaneously serving as a position indicator with electric actuator, DIN EN ISO 5 with pneumatic actuator, DIN EN ISO 5 union DIN 8063 GFR flange DIN 50, PN 0/6, with DIN face-to-face dimension union socket end for solvent welding DIN ISO () union socket end for fusion welding DIN ISO () union spigot end for fusion welding DIN ISO () Mounting as required Fastening optionally available with bracket Accessories limit switch unit bracket Colour body:, grey, RAL 0 body:, grey, RAL 03 T-handle:, orange, RAL 00 GFR Flanges: black, RAL Stem PVC-C PE POM > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

2 Ball valve C 0 Pressure/temperature diagram Pressure loss curve (standard values for H O, 0 C) P = operating pressure T = temperature The pressure/temperature limits are applicable for the stated nominal pressures and a computed operating life factor of 5 years. These are standard values for harmless media (DIN 03), to which the valve material is resistant. For other media please refer to the ASV resistance guide. The durability of wear parts depends on the operating conditions of the application. For temperatures below 0 C ( < +0 C) please specify the precise operating conditions of the application. The rated pressure depends on the valve and material. For the corresponding rated pressure value of the valve, please refer to the»order table«. P = pressure loss Q = flow pressure loss and k v value The diagram shows the pressure loss P in relation to the flow Q. Conversion aid: c v = k v x 0.0; f v = k v x Units: k v [l/min]; c v [gal/min] US; f v [gal/min] GB Flow characteristic VO = valve opening FR = K v value Torque (Nm) The specified torques are standard values. They were determined at the specified nominal pressures with H O, 0 C. These values can be higher or lower, depending on the operating pressure and the medium. > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

3 Ball valve C 0 Operating note Safe operation of the valve can only be ensured if it is properly installed, operated, serviced or repaired by qualified personnel according to its intended use while observing the accident prevention regulations, safety regulations, relevant standards, directives/technical regulations or codes of practice such as e.g. DIN, DIN EN, DIN ISO and DVS*. *DVS = German Welding Society The intended use includes adhering to specified limit values for pressure and temperature, as well as checking the resistance. This requires all components coming into contact with the medium to be "resistant" in accordance with the ASV resistance guide. > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de 3

4 Ball valve C 0, manual body ball PE / 3/ / / socket end DIN ISO kg 0. kg 0.9 kg 0.55 kg.05 kg 0.6 kg GFR flange DIN EN kg kg kg 0.0 kg 05.0 kg 06.0 kg body ball PE / 3/ / / socket end DIN ISO kg 0. kg 0. kg 0.8 kg 0.53 kg 0.86 kg spigot end DIN ISO kg 0. kg 0.8 kg 0.9 kg 0.5 kg 0.8 kg GFR flange DIN EN kg kg kg kg 03.3 kg 038. kg > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

5 Ball valve C 0, manual dimensions DN(mm) 0 5 / 5 0 3/ / 50 0 / dimensions(mm) b d dk D D D E f G H K L L L L3 L L z / / / / > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de 5

6 Ball valve C 0, electric Voltage please refer to the technical data further drive variants and options on request Mounting Set Coupling steel square, galvanised adaptor made of PA Screws stainless steel (.30) Actuator variant 30 V body ball PE / 3/ / / flange DIN EN kg.3 kg.38 kg.0 kg.0 kg 5.0 kg socket end DIN ISO kg kg kg kg kg kg Actuator variant 30 V body ball PE / 3/ / / flange DIN EN kg.3 kg.39 kg.9 kg.3 kg. kg socket end DIN ISO kg.9 kg.9 kg 3.8 kg 3.53 kg 3.86 kg spigot end DIN ISO kg kg kg kg kg kg 6 > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

7 Ball valve C 0, electric dimensions DN(mm) actuator type / 3/ ER Premier ER Premier ER Premier / EK / EK EK60 dimensions(mm) b B B B d D f h h H K L L L L3 L L N N O u v w z > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

8 Ball valve C 0, electric Technical data EK-Line actuator type Torque Voltage Manipulating time(s) Power consumption(w) Setting angle( ) Weight(kg) Duty cycle(%) Type of protection Temperature( C) EK VAC IP EK VAC IP EK35 (*) 35 VAC/DC IP EK60 (*) 60 VAC/DC IP (*) Drive variants: please order separately. Recommended wiring EK-Line A = power supply B = additional limit switches C = earth FC = additional limit switch FC = additional limit switch»a«= open»b«= closed manual emergency control EK-Line The valve can be manually operated in the event of an interruption of the power supply. To allow manual emergency control, turn the coupling switch from "AUTO" to "MAN" and hold in the "MAN" position.. EK0 (Use the T-handle to turn the actuator shaft.); EK35-EK60 (Turn the actuator shaft with the aid of an adjustable spanner.) Release the coupling switch to re-engage the gearing. 8 > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

9 Ball valve C 0, electric Technical data actuator type Torque Voltage Manipulating time(s) Power consumption(w) Setting angle( ) Weight(kg) Duty cycle(%) Type of protection Temperature( C) (*) Drive variants: please order separately. Power supply ER Premier ER Premier VAC VDC 3 30 IP ER Premier 0 (*) 0 VAC/DC 30 IP A = power supply C = 3-switch-point-modus D = open/closed-switch-point-modus»a«= valve open»b«= valve closed = COM = valve»open«3 = valve»closed«feedback ER Premier B = Feedback FC = limit switches valve»open«fc = limit switche valve»closed«> data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de 9

10 Ball valve C 0, electric Manual emergency control ER Premier The valve can be manually operated in the event of an interruption of the power supply. To allow manual emergency control, turn the coupling switch from "AUTO" to "MAN" and hold in the "MAN" position. Turn the actuator shaft with the aid of an adjustable spanner. Release the coupling switch to re-engage the gearing. 0 > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

11 Ball valve C 0, pneumatic Control Pressure 6 bar Standard visual position indicator further options such as limit switch unit, positioner or pilot valves on request Control Function NC (normally closed) NO (normally open) DA (double acting) Mounting Set Coupling steel square, galvanised adaptor made of PA Screws stainless steel (.30) Actuator variant NC body ball PE / 3/ / / flange DIN EN kg 3. kg 3.33 kg 3.85 kg.05 kg.9 kg socket end DIN ISO kg kg kg kg kg kg Actuator variant NO body ball PE / 3/ / / flange DIN EN kg 3. kg 3.33 kg 3.85 kg.05 kg.9 kg socket end DIN ISO kg kg kg kg kg kg > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

12 Ball valve C 0, pneumatic Actuator variant DA body ball PE / 3/ / / flange DIN EN kg.9 kg.9 kg.6 kg.66 kg. kg socket end DIN ISO kg kg kg kg kg kg Actuator variant NC body ball PE / 3/ / / flange DIN EN kg 3. kg 3.3 kg 3.8 kg.0 kg.35 kg socket end DIN ISO kg.86 kg.9 kg 3.3 kg 3. kg 6.3 kg spigot end DIN ISO kg kg kg kg kg kg > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

13 Ball valve C 0, pneumatic Actuator variant NO body ball PE / 3/ / / flange DIN EN kg 3. kg 3.3 kg 3.8 kg.0 kg.35 kg socket end DIN ISO kg.86 kg.9 kg 3.3 kg 3. kg 6.3 kg spigot end DIN ISO kg kg kg kg kg kg Actuator variant DA body ball PE / 3/ / / flange DIN EN kg.9 kg.95 kg.5 kg.63 kg. kg socket end DIN ISO kg. kg.53 kg. kg.9 kg 3.3 kg spigot end DIN ISO kg kg kg kg kg kg > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de 3

14 Ball valve C 0, pneumatic dimensions DN(mm) actuator type 0 5 / 00 DA 00S 5 0 3/ 00 DA 0S DA 0S 0 3 / 00 DA 0S 50 0 / 00 DA 0S DA 0S dimensions(mm) b B B B d D f h h H H K L L L L3 L L N N O O P P u v w z N/O/P/H = NC-NO N/O/P/H = DA > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de

15 Ball valve C 0, pneumatic Technical data -Line Option (to be ordered additionally if required) limit switch unit; positioner; handwheel; pilot solenoid valve; AS Interface connection actuator type Function Torque (start) at 6 bar(nm) Torque (end) at 6 bar(nm) Control volume (Opening)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) (*) Drive variants: please order separately. actuator type Function Torque (start) at 6 bar(nm) Control volume (Opening)(Liter) Control volume (Closing)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) (*) Drive variants: please order separately. 00S / DA / 0.6 0S /.5 0 (*) DA /. 0S /.95 Control pressure connection Normally closed NC: control pressure to connection»b«,valve opens Normally open NO: control pressure to connection»b«,valve closes Double acting DA: control pressure to connection»a«,valve closes control pressure to connection»b«,valve opens Control: 3/-way solenoid valves for actuators 5/-way solenoid valves for DA actuators Note: The drives require a control pressure of 6 bar for optimum function. Malfunctions may occur, if the control pressure deviates. In this case, a new drive configuration is necessary. > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de 5

16 Ball valve C 0 parts lists position quantity designation body with ball T-handle circlip pressure piece O-ring union end union nut O-ring 6 > data sheet no.: /0/9 ASVStübbe GmbH & Co. KG Hollwieser Str. 5 D-360 Vlotho Tel. +9(0) Fax +9(0) contact@asv-stuebbe.de