Ball Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
|
|
|
- Eric Mitchell
- 5 years ago
- Views:
Transcription
1 Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle with the locking function safety guard Intelligent accessory and interface for the integration of the limit switch box and actuators Integrated moulded bracket Application chemical and industrial plants Intended Use for shutting off pipeline systems Application Media Neutral and aggressive fluid or gaseous media free of solid particles, provided that the valve components coming into contact with the media are resistant at the operating temperature in accordance with the ASVresistance guide. Testing Requirements and tests/inspections according to DIN EN ISO 635 and ISO DIN EN 66, leakage rate A tested. Nominal Pressure (H O, 0 C) PN 0 PN 6 Fluid Temperature see pressure/temperature diagram Operating Pressure see pressure/temperature diagram Size DN 0 DN 50 Body PVCU Stem PVCU, fiberglassreinforced Ball PVCU Ball Seat Sealing Actuation with lockable hand lever for the "OPEN" or "CLOSED" position. with electric actuator, DIN EN ISO 5 with pneumatic actuator, DIN EN ISO 5 union featuring a connection thread suitable for plastic materials refer comments on the identification numbers Mounting Position as required; electric drives may not be installed upside down Fastening via mounting base with integrated fixing threads Colour body: PVCU, grey, RAL 70 body:, grey, RAL 703 body:, opaque, yellowishwhite hand lever: ABS, black RAL 9005 lever inlay: ABS, orange, RAL 004
2 Ball Valve C 00 Pressure/temperature diagram Pressure loss curve (standard values for H O, 0 C) P = pressure loss Q = flow pressure loss and k v value The diagram shows the pressure loss P in relation to the flow Q. Conversion aid: c v = k v x 0.07; f v = k v x 0.05 Units: k v [l/min]; c v [gal/min] US; f v [gal/min] GB Flow characteristic P = operating pressure T = temperature The pressure/temperature limits are applicable for the stated nominal pressures and a computed operating life factor of 5 years. These are standard values for harmless media (DIN 403), to which the valve material is resistant. For other media please refer to the ASV resistance guide. The durability of wear parts depends on the operating conditions of the application. For temperatures below 0 C ( < +0 C) please specify the precise operating conditions of the application. The rated pressure depends on the valve and material. For the corresponding rated pressure value of the valve, please refer to the»order table«vo = valve opening FR = K v value
3 Ball Valve C 00
4 Ball Valve C 00, manually body PVCU /8 / 3/4 /4 / PVCU female thread Rp kg kg kg kg kg kg PVCU socket ANSI kg 0.4 kg 0.37 kg 0.65 kg 0.9 kg.64 kg PVCU socket DIN kg kg kg kg kg kg kg PE spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg
5 Ball Valve C 00, manually body /8 / 3/4 /4 / socket DIN kg 0. kg 0.8 kg 0.7 kg 0.49 kg 0.66 kg. kg spigot DIN kg 0.9 kg 0.8 kg 0.50 kg 0.54 kg.6 kg PE spigot DIN kg 0.0 kg 0.3 kg 0.54 kg 0.74 kg.34 kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg body /8 / 3/4 /4 / socket DIN spigot DIN steel (DIN) flange DIN steel (ANSI) flange ANSI kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg
6 Ball Valve C 00, manually dimensions DN(mm) 6 0 3/8 0 5 / 5 0 3/ / / dimensions(mm) Rp A GFR (DIN)/ steel b (DIN) steel (ANSI) b B B C GFR (DIN)/steel (DIN) d steel (ANSI) d GFR (DIN)/ steel D (DIN) steel (ANSI) D D E h H H GFR (DIN)/ steel K (DIN) steel (ANSI) K L (spigot PE) L (spigot ) L (spigot ) L / L PVCU L L3 PVCU L3 L3 M V M 5 5,0 / M 5 5,0 3/ M 5 5, M 6 6 / M 8 45 / M M 8 45
7 Ball Valve C 00, electric, ER Premier Actuator variant 0040V AC body PVCU /8 / 3/4 /4 / PVCU female thread Rp kg kg kg kg kg kg PVCU socket ANSI kg kg kg kg kg kg PVCU socket DIN kg kg kg kg kg kg kg PE spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg
8 Ball Valve C 00, electric, ER Premier Actuator variant 4V DC body PVCU /8 / 3/4 /4 / PVCU female thread Rp kg kg kg kg kg kg PVCU socket ANSI kg kg kg kg kg kg PVCU socket DIN kg kg kg kg kg kg kg PE spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg
9 Ball Valve C 00, electric, ER Premier Actuator variant 0040V AC body /8 / 3/4 /4 / socket DIN kg kg kg kg kg kg kg spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg Actuator variant 4V DC body /8 / 3/4 /4 / socket DIN kg kg kg kg kg kg kg spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg
10 Ball Valve C 00, electric, ER Premier Actuator variant 0040V AC body /8 / 3/4 /4 / socket DIN spigot DIN steel (DIN) flange DIN steel (ANSI) flange ANSI kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg Actuator variant 4V DC body /8 / 3/4 /4 / socket DIN spigot DIN steel (DIN) flange DIN steel (ANSI) flange ANSI kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg
11 Ball Valve C 00, electric, ER Premier dimensions DN(mm) actuator type 6 0 3/8 ER Premier / ER Premier /4 ER Premier ER Premier /4 ER Premier / ER Premier ER Premier 0 dimensions(mm) Rp L (spigot ) L (spigot PE) L (spigot ) A GFR (DIN)/ steel b (DIN) steel (ANSI) b B B C GFR (DIN)/steel (DIN) d steel (ANSI) d GFR (DIN)/ steel D (DIN) steel (ANSI) D D h h H GFR (DIN)/ steel K (DIN) steel (ANSI) K L / L PVCU L L3 PVCU L3 L3 M N N O V M ,0 / M ,0 3/ M , M / M / M M
12 Ball Valve C 00, electric, ER Premier Technical data actuator type ER Premier 0 Torque 0 Voltage 0040 VAC VDC Manipulating time(s) 0 Setting angle( ) 90 Power consumption(w) 5 Weight(kg) Duty cycle(%) 30 Type of protection IP 65 Temperature( C) heating no no (*) Drive variants: please order separately. ER Premier 0 (*) 0 4 VAC/DC IP no no Power supply ER Premier A = power supply C = 3switchpointmodus D = open/closedswitchpointmodus»a«= valve open»b«= valve closed = COM = valve»open«3 = valve»closed«feedback ER Premier B = Feedback FC = limit switches valve»open«fc = limit switche valve»closed«
13 Ball Valve C 00, electric, ER Premier Manual emergency control ER Premier The valve can be manually operated in the event of an interruption of the power supply. To allow manual emergency control, turn the coupling switch from "AUTO" to "MAN" and hold in the "MAN" position. Turn the actuator shaft with the aid of an adjustable spanner. Release the coupling switch to reengage the gearing.
14 Ball Valve C 00, pneumatic, Prisma Actuator variant NC body PVCU /8 / 3/4 /4 / PVCU female thread Rp kg kg kg kg kg kg PVCU socket ANSI kg 0. kg.08 kg.9 kg 3.30 kg 4.09 kg PVCU socket DIN kg kg kg kg kg kg kg PE spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg
15 Ball Valve C 00, pneumatic, Prisma Actuator variant NO body PVCU /8 / 3/4 /4 / PVCU female thread Rp kg kg kg kg kg kg PVCU socket ANSI kg kg kg kg kg kg PVCU socket DIN kg kg kg kg kg kg kg PE spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg
16 Ball Valve C 00, pneumatic, Prisma Actuator variant body PVCU /8 / 3/4 /4 / PVCU female thread Rp kg kg kg kg kg kg PVCU socket ANSI kg 0.75 kg 0. kg.65 kg.9 kg.70 kg PVCU socket DIN kg kg kg kg kg kg kg PE spigot DIN kg 0. kg 0.9 kg.69 kg.95 kg.75 kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg
17 Ball Valve C 00, pneumatic, Prisma Actuator variant NC body /8 / 3/4 /4 / socket DIN kg kg kg kg kg kg kg spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg Actuator variant NO body /8 / 3/4 /4 / socket DIN kg kg kg kg kg kg kg spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg
18 Ball Valve C 00, pneumatic, Prisma Actuator variant body /8 / 3/4 /4 / socket DIN kg kg kg kg kg kg kg spigot DIN kg kg kg kg kg kg GFR (DIN) flange DIN kg kg kg kg kg kg steel (ANSI) flange ANSI kg kg kg kg kg kg Actuator variant NC body /8 / 3/4 /4 / socket DIN spigot DIN steel (DIN) flange DIN steel (ANSI) flange ANSI kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg
19 Ball Valve C 00, pneumatic, Prisma Actuator variant NO body /8 / 3/4 /4 / socket DIN spigot DIN steel (DIN) flange DIN steel (ANSI) flange ANSI kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg Actuator variant body /8 / 3/4 /4 / socket DIN spigot DIN steel (DIN) flange DIN steel (ANSI) flange ANSI kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg
20 Ball Valve C 00, pneumatic, Prisma dimensions DN(mm) actuator type 6 0 3/8 W WS 0 5 / W WS 5 0 3/4 W WS 3 5 W WS 40 3 / S / 00 0S S dimensions(mm) Rp L (spigot ) L (spigot PE) L (spigot ) A GFR (DIN)/ steel b (DIN) steel (ANSI) b B B C GFR (DIN)/steel (DIN) d steel (ANSI) d GFR (DIN)/ steel D (DIN) steel (ANSI) D D h h H H GFR (DIN)/ steel K (DIN) steel (ANSI) K L / L PVCU L L3 PVCU L3 L3 M N N O O P P V M ,0 / M ,0 3/ M , M / M / M M
21 Ball Valve C 00, pneumatic, Prisma Technical data Line Option (to be ordered additionally if required) limit switch unit; positioner; handwheel; pilot solenoid valve; AS Interface connection actuator type Function Torque (start) at 6 bar(nm) Torque (end) at 6 bar(nm) Control volume (Opening)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) actuator type Function Torque (start) at 6 bar(nm) Control volume (Opening)(Liter) Control volume (Closing)(Liter) Manipulating time (Opening)(s) Manipulating time (Closing)(s) Control pressure connection(inch) Weight(kg) Control pressure connection WS / W / S / / S /4.5 Normally closed NC: control pressure to connection»b«,valve opens Normally open NO: control pressure to connection»b«,valve closes Double acting : control pressure to connection»a«,valve closes control pressure to connection»b«,valve opens Control: 3/way solenoid valves for actuators 5/way solenoid valves for actuators Note: The drives require a control pressure of 6 bar for optimum function. Malfunctions may occur, if the control pressure deviates. In this case, a new drive configuration is necessary.
22 Ball Valve C 00 parts lists position quantity designation housing/body ball stem union threaded neck hand lever union end union nut ball seat Oring Oring Oring Oring sliding catch inlay for hand lever position quantity designation ball valve mounting box, lower part mounting box, upper part hand lever lever extension connector limit switches (micro or proximity switches)
23 Ball Valve C 00 position quantity designation ball valve mounting box, lower part mounting box, upper part electrical actuator drive adapter position quantity designation ball valve mounting box, lower part mounting box, upper part plate pneumatic actuator drive adapter connector limit switches (micro or proximity switches)
24 Ball Valve C 00
Ball Valve C 200. Stem PVC-U PVDF PP, fiberglass-reinforced. Ball PVC-U PP PVDF. Ball Seat PTFE. Application chemical and industrial plants
Ball Valve C 00 Benefits Highend industrial valve Flexible toolbox with a broad range of product varieties Reliable material combination for safe handling of critical media Newly designed ergonomic handle
Ball valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
Ball valve C 100 multi-part, high k v value, high stability
Ball valve C 100 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable ball seat
Ball valve C 10 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C 0 valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and cannot be flushed
Ball valve C 100 multi-part, high k v value, high stability
Ball valve C 00 multipart, high k v value, high stability Advantage optimised kv value for all s, the internal ball diameter is constructively adapted to the internal pipe diameter exchangeable and ball
Butterfly Valve K 220 for application in the harsh environment of the chemical industry
Butterfly Valve K 220 for application in the harsh environment of the chemical industry Advantage DN 20 to DN 400 liner as a element liner makes additional flange seals superfluous cost efficient and direct
Diaphragm Valve MV pneumatic - with pneumatically directly controlled actuator
Diaphragm Valve MV 0 - pneumatic - with pneumatically directly controlled actuator Advantage good control characteristics DN 5 - DN 50 equipped as standard with visual position indicator and manual emergency
Diaphragm Valve MV 309
Diaphragm Valve MV 309 Benefits compact designed pneumtically operated valve standard with visual position indicator common installation length air connections acc. to NAMUR Application chemical and industrial
Ball valve C 16. Nominal size DN Nominal size 2 6 Nominal pressure PN 6 10 bar.
Ball valve C 16 Nominal size DN 50 150 Nominal size 2 6 Nominal pressure PN 6 10 bar Features Special ball valve with fully encapsulated valve ball extremely low clearance volume high actuation reliability
Pressure relief valve DHV 718
Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless
Ball valve C 200 PROP / C 200 DOS
Ball valve C 00 PROP / C 00 DOS Additional options on request Silicone free www.asv-stuebbe.com/products/instrumentation PVC-U PP PVDF Nominal size DN 0 50 Nominal size /8 Nominal pressure PN 0 6 bar C
Pressure relief valve DHV 712-R set range: 0,3-10,0 bar
Pressure relief valve DHV 7R set range: 0,3 0,0 bar Benefits pressure setting possible at any time, also during operation optimum monitoring valves high reproducibility of the set pressure high level of
Wafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
Angle Seat Valve SV 300
Angle Seat Valve SV 00 Advantage corrosion resistant maintenance-free good control characteristics metal-free Application chemical plants industrial plants water treatment Utilisation for shut-off and
Ball Valve C 110. PVC-U PP PVDF - wafer flange socket end DIN-flange. Ball. Advantages. Ball seat. Application. Sealings. Utilisation.
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Ball Valve C 110 PVC-U PP PVDF - wafer flange
Diaphragm pressure gauge guard MDM 902 corrosion-free pressure transmission for aggressive media
Diaphragm pressure gauge guard MDM 902 corrosionfree pressure transmission for aggressive media Application chemical plants electroplating plants Utilisation for corrosionfree pressure transmission between
Diaphragm valve MV 309
Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)
C 200 Modern Construction. Flexible Modular Design. Highest Safety.
Ball Valve Modern Construction. Flexible Modular Design. Highest Safety. The System At A Glance Ergonomic hand lever Position locking Safety Guard Double shaft seal with hand lever Intelligent interface
Wafer check valve RSK 500
Wafer check valve RSK 00 Advantage corrosion resistant simple installation as a wafer type flange fitting centring of the valve by the housing diameter body with O-ring, no additional flange s required
Strainer SF 305. Sealing FPM EPDM
Strainer SF 05 dvantage corrosion resistant transparent version (transparent PVC) for visual control of the degree of soiling easy to maintain pplication chemical plants industrial plants water treatment
Modular valve block MVB 100/200
Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution
Diaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
Solenoid valve type 150 direct action
Solenoid valve type 50 direct action Function closed when deenergized (NC) direct action Valve Function Switching function NC: In the position of rest, the valve is closed by the spring force. When energized
Pressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
ASV Stübbe GmbH & Co. KG Hollwieser Straße D- Vlotho Fon + (). - Fax + (). - www.asv-stuebbe.de contact@asv-stuebbe.de Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV High repeating accuracy,
Flowmeter DFM
Flowmeter DFM 165 50 Nominal size DN 10-65 Nominal size /8 2 1/2 Nominal pressure PN 10 bar Features Measuring range to 50,000 l/h suitable for a wide range of applications for gaseous medium types, water,
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position
485 - NC NO/DA DN
485 - NC 285 - NO/DA DN 25-100 The 485/285 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic
PNEUMATICALLY ACTUATED 2-WAY
482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing
2/2-way ball valve with electric rotary actuator, ball valve in stainless steel, DN 10-65
2/2-way ball valve with electric rotary actuator, ball valve in, N 10-65 Suitable for aggressive media High flow rate value -piece Actuator with adjustable limit switches 2-piece Visual position indicator
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True
Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.
Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True
CATALOG. Actuated Diaphragm Valve DN PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL.
CATALOG Actuated Diaphragm Valve DN 15-100 PVC-U / PVC-C / PP-H / PVDF / ABS SMART IN FLOW CONTROL. TABLE OF CONTENTS Type 186 - DN 12-15 (MA 10) 04 General information - Technical specification 04 Sectional
Examples 3/2-way valve A T NO: Symbol
1/1 Hauhinco-3_2-way valve_b1_dn3-25_pn320_pn500_x,y-intern water s 01/2016 3/2-way valve B1 X,Y - DN3 DN25 PN320, PN500 Features: Hydraulically actuated directional seat valve controlling liquid media.
PF6 Stainless Steel Piston Actuated On/ Off Valves
Page of TI-P7- CH Issue Cert. No. LRQ 9 ISO 9 PF Stainless Steel Piston Actuated On/ Off Valves Description A -port pneumatically actuated on / off stainless steel valve for use on steam, water, air, oil
Flow-rate curves for diaphragm valves Type 2730 plastic, 2731 forged, 2731 cast, 2731 GP cold formed pipe valve body
Flow-rate curves for diaphragm valves Page 1/12 In this documentation fl ow characteristics for the Bürkert diaphragm valves 273 and 2731 are given. These characteristics were determined with a pressure
710, 717, 723. Ball Valve, Plastic
Ball Valve, Plastic Aufbau GEMÜ 710, 717 and 72 are 2/2 or /2-way plastic ball valves available in the sizes 1/2 to 2 (DN 8 to DN 50, GEMÜ 717 to DN 100). GEMÜ 710 has a corrosion resistant low maintenance
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The pneumatically operated 2/2 way diaphragm valve GEMÜ is a corrosionresistant all plastic construction. It has a maintenancefree piston actuator which can be controlled
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50
2/2-way ball valve with electric rotary actuator, ball valve in plastic, DN 10-50 Suitable for aggressive media High flow rate value Actuator with adjustable limit switches Visual position indicator Safe
GEMÜ 717 Manually operated ball valve
Manually operated ball valve Features igh flow rates Low weight Choice of various body materials and connection types vailable as shut off or control valve / and /way versions available Description The
PF6 Stainless Steel Piston Actuated On/Off Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, DN 10-50
2/2-way Quarter-Turn Ball Valve in stainless steel with pneumatic rotary actuator, 10-50 (2652) (2655) 2 or ball valve Pneumatic actuator Compact design Visual position indicator Types 2652/2655 can be
Variable area flowmeter DFM 165 to 350
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D60 Vlotho Fon +9 (0) 57 33.7 990 Fax +9 (0) 57 33.7 99 00 www.asvstuebbe.e contact@asvstuebbe.e Variable area flowmeter DFM to 3 For all inustrial uses High
2/2-way proportional seat valve
1/1 Hauhinco-2_2-way_proportional seat valve_dn10-pn320_pn500 water hydraulics 01/2016 2/2-way proportional seat valve Directly actuated DN10 PN320, PN500 Features: Directly actuated directional seat valve
600, 630. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The /630 pneumatically operated 2/2-way valves have a low maintenance piston actuator which can be controlled by inert gaseous media. They have an integral optical
NAF-Setball ball sector valves DN , PN 10-40, ANSI Class
NAF-Setball ball sector valves DN 25-400, PN 10-40, ANSI Class 150-300 Fk 41.51(12)GB 4.98 Replaces Fk 41.51(1GB 12.97 Primary characteristics NAF-Setball is a ball sector valve with metal-to-metal or
Rotary Plug Valve BR 23e
PTFE-lined Rotary Plug Valve BR 23e Application: PTFE-lined rotary plug valve for aggressive media, especially due to high demands in chemical plants: Nominal diameter: DN 25, DN 50, DN 80 and NPS1, 2,
DK/CP DN PVC-U / PVC-C / PP-H / PVDF. Pneumatically actuated 2-way diaphragm valve
PVC-U / PVC-C / PP-H / PVDF Pneumatically actuated 2-way diaphragm valve DK/CP DN 15 32 The new DK/CP diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids.
Globe Valve, Metal. Sectional drawing
Globe Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way globe valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. The valve plug is fixed to the
DKD/CP DN PVC-U. Direct action pneumatically actuated 2-way diaphragm valve
DKD/CP DN 15 65 PVC-U Direct action pneumatically actuated 2-way diaphragm valve DKD/CP DN 15 65 The DKD/CP diaphragm valve is particularly suitable for shutting off very dirty and/or highly viscous fluids.
R690. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction The GEMÜ diaphragm valve has a low maintenance membrane actuator which can be controlled by air or inert gases. Normally Closed (NC), Normally Open (NO) and Double
DK Series Pneumatic Diaphragm Valves Product Data Sheet
1" through 2-1/2" 1/2" and 3/4" < STANDARDS > ASTM D1784 ASTM D1785 ASTM D4101 ASTM D3222 ASTM D2464 ASTM D2466 ASTM D2467 ASTM F441 ASTM F437 ASTM F439 ASTM F1498 IPEX DK Series are the ideal solution
NAF-Triball ball valve
NAF-Triball ball valve DN 10-100 for max. 40bar Fk 25.622(12)GB 12.09 Primary characteristics NAF-Triball is a full bore ball valve designed for shut-off, on-off functions as well as control application
2/2- and 3/2-way Ball Valve with pneumatic rotary actuator, plastic body, DN 10-50
/- and 3/-way Ball Valve with pneumatic rotary actuator, plastic body, DN -50 Radially expandable body Pneumatic actuator in compact model Optical position indicator Control valve acc. to NAMUR Type 5
VKD DN PP-H. DUAL BLOCK 2-way ball valve
VKD DN 65 100 PP-H DUAL BLOCK 2-way ball valve VKD DN 65 100 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. VKD is a True Union ball
3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
3/2-way Miniature Rocker Solenoid Valve for pneumatic systems
66 /2-way Miniature Rocker Solenoid Valve for pneumatic systems Direct-acting High cycling rate Reduced power consumption CNOMO and Bürkert flange interface Type 66 can be combined with TEX Ex ia on request
GEMÜ 710 Pneumatically operated ball valve
Pneumatically operated ball valve Features High flow rates Choice of various body materials and connection types Available as shut off or control valve / and /way versions available Description The / and/or
Distributed By Aetna Plastics Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General Size: ½ 2 Material: PVC, CP
Pneumatically Actuated Diaphragm Valve DIASTAR Ten and TenPlus General : ½ 2 Material: PVC, CPVC, PROGEF Standard PP, PROGEF Natural PPn, ABS, SYGEF Standard PVDF, SYGEF Plus PVDF-HP Diaphragm: EPDM, FPM,
Vertical Sump Pump Type ETL
Vertical Sump Pump Type ETL»dry running safe«technical data Flow rate Q up to 220 m 3 /h Head H up to 55 m Submersion depth 500 or 750 mm Suction extension up to 1800 mm Materials limits of use PP up to
George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type 025/028
George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type /8 Diaphragm Valves - Pneumatic º All-plastic actuator made of PP-GF º Compact design º Lightweight º Comprehensive line of accessories
Angle seat valve with piston actuator VZXA-...-K
Angle seat valve with piston actuator VZXA-...-K Festo AG & Co. KG Postfach 73726 Esslingen Germany +49 711 347-0 www.festo.com 3 Further information Accessories www.festo.com/catalogue Spare parts www.festo.com/spareparts
Pressure Relief Valve Overflow Valve Type DHV 715 Type DHV 716 Type DHV 725
Pressure Relief Valve Overflow Valve Type DHV Type DHV Type DHV DIBt* approve DIBt* approve High repeating accuracy, with union sockets or spigot ens Print / The optimal monitoring valves Sizes up to Operating
Type Electrically Actuated Ball Valve
Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement socket, threaded,
Type 543. Three-way Ball Valve
Three-way Ball Valve Type 543 General Size: ⅜ 2 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM or FPM End Connection: Solvent cement socket, threaded, flanged,
Wafer Check Valve Type 012 PVC-U
novel valve design with conical sealing surface for highest requirements and long service life body disc reinforced EPDM / FPM gaskets DN40 / d50 / 1½'' DN200 / d225 / 8'' operating pressure max. 10 bar
Diaphragm Valve, Plastic 2/2 way, motorized
Diaphragm Valve, Plastic / way, motorized Construction Maintenancefree electric actuator Maintenancefree toothed belt drive Reversible synchronous motor Manual override Optical position indicator Features
2 way ball valve M1 with pneumatic actuator
Praher Plastics Austria GmbH DB/EN/DEEN/14/03/335 Subject to change without prior notice!! General: Valve body: Sealing material: Ball seating joint: Dimensions: PVC-U EPDM / FPM PTFE DN10 DN50 d16 d63
Two-Way Metal Seated Ball Valve Type 75-M
Two-Way Metal Seated Ball Valve Type 75-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Fire Safe design optional Design Standards EN 12516, EN 1983, ISO
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
ASV sturdy and robust construction. DN 10 up to DN bar (PN 10) at 20 C. DMV 755: 1,0-9,0 bar DMV 765: 0,5-9,0 bar
Pressure Reucing Valve Type DMV Type DMV Print-No. / Design Size Max. Pressure Setting Range Pressure Setting Working Pressure Back lash Operating Security Maintenance Simple inline pipe connection ASV
TKD dn PP-H. Dual Block 3-way ball valve
TKD dn 15 50 PP-H Dual Block 3-way ball valve TKD DN 15 50 FIP has developed a VKD DUAL BLOCK ball valve to introduce a high reference standard in thermosplastic valve design. TKD is a True Union diverting
BR 14b / BR 14c Application:
High - Performance Butterfly valve BR 14b / BR 14c Application: Tight-closing, double-eccentric butterfl y control valve especially for the chemical industry where aggressive media s are used, for example
VKD DualBlock 2-way Ball Valve
The VKD DualBlock ball valve is a fully unionised valve that stands up to the most severe industrial applications. Size range from /" / d6mm up to 2" / d6mm Pressure rating: Maximum working pressure: 6
R677. Diaphragm Valve, Plastic
Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically
Butterfly valve Series K
P R O C E S S T E C H N I K G M B H Centrally mounted butterfly valve PTFE lined Type KG 6 KG 8 K 16 K 18 two-piece body GEFA-MULTITOP Automation system Exchangeable flange for direct installation Unsurpassed
DK AND DK/CP DN 15 65
DK AND DK/CP DN 15 65 New diaphragm valves with maximised flow rate available in manual or pneumatically actuated versions. Manual versions are equipped with the innovative DIALOCK lockable handwheel.
Solenoid valves VZWM-L, NPT
Key features and type codes General Indirectly actuated diaphragm valve Process valve connection N14 N2 Flow rate 1400 31000 l/min Available in brass or stainless steel casting Wide range of coils VZWM
3/2-way Solenoid Valve for pneumatics
656 3/-way Solenoid Valve for pneumatics Compact design Single and manifold mounting Low power consumption Rocker pilot in DC Type 656 can be combined with... Fast response times Type 506 Type 510/511
Two-Way Soft Seated Ball Valve Type 75-S
Two-Way Soft Seated Ball Valve Type 75-S Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Design Standards EN 12516, EN 1983, ISO 5211, AD-2000 ASME B16.34,
Type Electrically Actuated Ball Valve
GF Piping Systems Electrically Actuated Ball Valve Type 179-184 General Size: ⅜ 4 Material: PVC, CPVC, PROGEF Standard PP, ABS, SYGEF Standard PVDF Seat: PTFE Seals: EPDM, FPM End Connection: Solvent cement
Control valves with pneumatic actuators up to 350 C PN
300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for
Drain ball valve BR 21a
PTFE - lined Drain ball valve BR 21a Application: Tight-closing PTFE-lined drain ball valve for corrosive media, especially for high process demand in chemical plants: Nominal sizes DN 50 to DN 150 Nominal
with pneumatic actuator Pneumatic process valve, Y-pattern DN ARI-STEVI AS 350 Pneumatic actuator - with screwed sockets
with pneumatic actuator Pneumatic process valve, Y-pattern DN 15-50 ARI-STEVI AS 350 - with screwed sockets Piston actuator Required air supply pressure, max. 10 bar Operating pressure, max. 16 bar Page
Installation, Operation, and Maintenance Manual
Industrial Process Installation, Operation, and Maintenance Manual Series PBV Plastic Lined Ball Valve Table of Contents Table of Contents Introduction and Safety...2 Safety message levels...2 User health
Angle seat valve with diaphragm actuator VZXA-...-M
Angle seat valve with diaphragm actuator VZXA-...-M Instructions Operating (Translation of the original instructions) Festo AG & Co. KG Ruiter Straße 82 73734 Esslingen Germany +49 711 347-0 www.festo.com
GEMÜ R680 Motorized diaphragm valve
Motorized diaphragm valve Features Standard integral optical position indicator Optional flow direction and installation position Insensitive to particulate media Motorized alternative for applications
Angle seat valve with piston actuator VZXA-...-K
Angle seat valve with piston actuator VZXA-...-K Instructions Operating (Translation of the original instructions) Festo AG & Co. KG Ruiter Straße 82 73734 Esslingen Germany +49 711 347-0 www.festo.com
FlowCon Energy FIT System
Energy FIT System Energy-Saving Pressure and Temperature Independent System 65-250 mm / 2 1/2-10 SPECIFICATIONS PICV valve: Static pressure: 4000 kpa / 580 psi Ambient temperature: -10 C to +50 C / +14
Two-Way Metal Seated Ball Valve Type 85-M
Two-Way Metal Seated Ball Valve Type 85-M Design Characteristics Two piece body Floating ball Blow out proof stem ive loaded stem packing Spring loaded seat system Fire Safe design optional Design Standards
Type and Type Pneumatic Control Valves Type 3510 Micro-flow Valve
Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research
SAFETY QUICK SHUT-OFF VALVES FOR OIL. Safety devices with automatic shut-off function ASV DN 15, 20, 25 KVAZ DN 32, 40, 50
SAFETY QUICK SHUT-OFF VALVES FOR OIL Safety devices with automatic shut-off function Production series Nominal diameter ASV DN 15, 20, 25 KVAZ DN 32, 40, 50 KVAZ for high pressure DN 15, 20, 25, 32, 40,
CEPEX PLASTIC VALVES EXTREME SERIES
CEPEX PLASTIC VALVES EXTREME SERIES Technical Product Presentation Cepex presentation Cepexis one of the leading European (Spanish) manufacturers of plastic valves and fittings. For more than 30 years
BALL VALVE - 10 SERIES Electric actuator - El-O-Matic
DN B C D BALL VALVE - 10 SERIES Electric actuator - El-O-Matic E L DIMENSIONS: (mm) DN Ø L B C EL D E Kg 10 3/8" 36 33 73 55 298 95 7,8 15 1/2" 36 33 73 55 298 95 7,8 20 3/4" 39 36 76 55 301 95 8,3 25
DK DN PP-H. DIALOCK 2-way diaphragm valve
DK DN 15 65 PP-H DIALOCK 2-way diaphragm valve DK DN 15 65 The DK DIALOCK diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of
2/2-way Globe Valve for media up to +180 C, DN
2/2-way Globe Valve for media up to +180 C, DN 10-100 Compact globe valve version Flange, threaded and welded ports as standard Stainless steel 316L valve body Available with flow direction below and above
BOA-CVP H. Type Series Booklet
Control Valve BOA-CVP H PN 16/25 DN 20-150 Type Series Booklet Legal information/copyright Type Series Booklet BOA-CVP H KSB Aktiengesellschaft Pegnitz All rights reserved. Contents provided herein must
FK DN PVC-U Butterfly valve
.co.th FK DN 40 300 PVC-U Butterfly valve FK DN 40 300 The FK is a butterfly valve for shutting off or regulating flow, with structural characteristics that make it ideal for industrial applications requiring
BALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA
BALL VALVE DOUBLE BLOCK & BLEED design RSD BB type TRUNNION MOUNTED, ANTISTATIC,FIRE SAFE DESIGN API607,API6FA APPLICATIONS Designed and executed for use in pipeline systems, which convey fluids under
Ultrasonic filling level sensor UFM 200 / 600 C2 / C4 / R / MD
Ultrasonic filling level sensor UFM 200 / 600 C2 / C4 / R / MD Features UFM 600 up to 6 metres UFM 200 up to 2 metres for distance, volume and filling level measurement for containers, open basins or channels