UROTUF F83-M-75 Product Code ( ) (Formerly EM ) High Solids Oil Modified Urethane
|
|
|
- Kory Harrison
- 5 years ago
- Views:
Transcription
1 April 2005 UROTUF F83-M-75 Product Code ( ) (Formerly EM ) High Solids Oil Modified Urethane DESCRIPTION UROTUF F83-M- 75 is a high solids oil modified urethane developed for use in 350 G/L floor varnishes. APPLICATION Low VOC floor varnishes at all gloss levels Modifier for low VOC maintenance enamels FEATURES Abrasion and stain resistant films Supplied at 75% NV for formulating latitude Fast dry, under 6 hours tack free Compatible with silicone and halogenated exempt solvents for control of VOC and application viscosity TYPICCAL PROPERTIES Percent Solids, Weight Percent Solids, Volume, Calculated 70 25º C Gardner-Holdt Z 3 Z 4+ Stokes Reduced Viscosity, 62.5 % NV in Mineral Spirits, Stokes Acid Value, on Solids 1 max. Color, Gardner 6 max. Pounds per Gallon, Solution Pounds per Gallon, Solids, Calculated 8.40 Solvent Mineral Sprits STORAGE Store in a cool, dry place, preferably under 80º F, in a full, tightly closed container, to insure a useful shelf life of 9 months SAFETY Read the Urotuf F83-M-75 Material Safety Data Sheet before handling, storing or using this product.
2 Urotuf F83 Dilution Curve Viscosity CPS With Brookfield RVT-C/P, Cone # Weight Solids in Mineral Spirits cps stokes The viscosity of Urotuf F83-M-75 varnish modified with Urotuf F81-M-80 is given below. Dow Corning 244 Fluid is an exempt solvent added to 350 g/l formulations to lower viscosity. PCBTF (Oxsol 100) is also a suitable exempt solvent. Urotuf polymers are shown as resin solids. Urotuf F83-M-75 Solids Urotuf F81-M-80 Solids Dow Corning 244 Fluid, % On Total Viscosity, CPS Typical Varnish Formulations with UROTUF F83-M-75 and Related Urotuf Products Page 2 of 7
3 Polymer Urotuf F83 Urotuf F87 Urotuf F77 Urotuf F78 Formula H 89-G 89-B 89-A Urotuf F83-M Urotuf F87-M Urotuf F77-M Urotuf F78-M Mineral Spirits % Cobalt Ten Cem (1) Dri-Rx (1) % AOC (1) --- (5) Activ 8 (2) Skinno # Total Varnish Properties Weight Percent Solids Volume Percent Solids VOC, grams/liter Viscosity, CPS (3) 171 (4) Pounds per Gallon (1) OM Group (2) R.T. Vanderbilt (3) Brookfield RVT-C/P, Cone #40 (4) Urotuf F81-M-80 or exempt solvent can be used to reduce viscosity as shown in the chart on the previous page (5) Addition of Aluminum drier (OM Group) can be beneficial in improving thick film cure and early hardness development Page 3 of 7
4 Film Performance for UROTUF F83-M-75 and Related Urotuf Varnishes Polymer Urotuf F83 Urotuf F87 Urotuf F77 Urotuf F78 Circular Dry Time Recorder (1) Set, Minutes 0:35 0:40 0:15 0:30 Through Dry, Hours : Minutes 2:10 3:00 1:50 1:55 Dry Hard, Hours : Minutes 3:00 14:00 2:10 2:40 Tack Free, Hours :Minutes (2) 6: :30 1:30 Sward Hardness 1 day day day Pencil Hardness F H 2H 3H Days to Reach Mar Resistance (3) Impact Resistance, in-lbs Direct Reverse Mandrel Bend, 1/8 Pass Pass Pass Pass Abrasion Resistance, mg loss (4) Chemical Resistance, average (5) Solvent Resistance, dbl rubs Xylene >200 >200 >200 >200 Isopropanol >200 >200 >200 >200 Methyl ethyl ketone (1) 3 mil wet film applied to Bonderite 1000 (2) Zapon Tack Tester, 500 gm load (3) Days to achieve excellent mar resistance after film application (4) CS 17 Wheels, 1000 gm load, 1000 cycles (5) Spot test, 24 hour, covered, rating 0-5, 5=no effect, average rating for 24 reagents. 1 coat, 3 wet mils on Bonderite 1000 treated steel, 7-day air dry, results will differ on wood, individual reagent results on next page Chemical Resistance Data Page 4 of 7
5 Polymer Urotuf F83 Urotuf F87 Urotuf F77 Urotuf F78 Coffee Tea Black Marker Black Ink Pen Lipstick Shoe Polish Mercurochrome Dye Water Ketchup Mustard Nail Polish Nail Polish Remover Ethanol-50% Acetic Acid-10% Nitric Acid-2% Sulfuric Acid-10% Sodium Hydroxide-10% Ammonia-10% Formula Windex Spic and Span - 1% Red Cooking Wine Olive Oil Chemical Resistance, total Chemical Resistance, average (1) (1) Spot test, covered, 24 hour exposure, 0-5 rating, 5= no effect, 1 coat, 3 wet mils, 7-day air dry, on phosphated steel, results will differ on wood Page 5 of 7
6 Urotuf F83 Gloss Reduction Gloss at 60 Degrees Pounds of Degussa TS 100 per 100 Gallons Page 6 of 7
7 1000 Urotuf F83 Satin Varnish Viscosity (1) Dow Corning 244 Fluid Additions 100 Viscosity Dow Corning 244 Fluid, Wt % cps stokes (1) Varnish contains 40 # /100 gallon Degussa TS-100 (2) Brookfield RVT-C/P, Cone # 40 Page 7 of 7
935-Series. NORTHSTAR MS, HG Urethane Topcoat. Description:
212013 935-Series NORTHSTAR MS, HG Urethane Topcoat Description: NorthStar s 935-series is the tried and proven success of Medium Solids technology. 935 offers outstanding gloss retention, chemical resistance,
PERFORMALOC 9000 Advanced Productivity Coatings from PPG
PERFORMALOC 9000 Advanced Productivity Coatings from PPG Performance Coatings that Loc Offering its users color and gloss retention that surpasses most 2-comp coatings are manufactured from proprietary,
Eastman TMPD Glycol and Purified Isophthalic Acid
For the Resins Market High-Solids Polyester Resin Formulation HS-3-5T Based on TMPD Glycol and Purified Isophthalic Acid OH CO 2 H OH CO 2 H 2,2,4-Trimethyl-1,3-Pentanediol CAS: 144-19-4 Purified Isophthalic
Turbo-Coat Acrylic Conformal Coating
Product Information Turbo-Coat Acrylic Conformal Coating 2108 Introduction Techspray s new Turbo-Coat Acrylic Conformal Coating is designed to speed up board production throughput without additional investment
C HO H + P o l y a l d e h y d e. FIGURE 2 Preparation of polycarbamates from the reaction of polyols with urea. Urea/Catalyst Heat
FIGURE 1 Formation of a polyurethane from the reaction of a polycarbamate and polyaldehyde. H H N N NH 2 P o l y c a r b a m a t e + H C P o l y a l d e h y d e C H H + R H N H R + H 2 P o l y u r e t
ALKYD POLYESTERS 1 // NATUREWORKS PERFORMANCE CHEMICALS
ALKYD POLYESTERS 1 // NATUREWORKS PERFORMANCE CHEMICALS CREATING PERFORMANCE THROUGH CHEMISTRY Building upon decades spent advancing materials chemistry innovation, NatureWorks offers solutions based on
PRODUCT GUIDE: UNIVERSAL PRIMERS. Version:
PRODUCT GUIDE: UNIVERSAL PRIMERS Version: 08.07.17 EAGLE BRIDGES PRODUCT DATA SHEET PRODUCT: LIGHT GREY PRIMER Product Number: 2208-08 DESCRIPTION: A quick fast dry metal primer that was designed to have
TUFCOTE 1.9 HG-D HIGH GLOSS WATERBORNE ACRYLIC DTM (formerly DuPont 72P )
TUFCOTE 1.9 HG-D (formerly DuPont 72P ) Tufcote 1.9 HG-D is a high gloss, single-package, VOC conforming product (1.9 lbs./gal.) based on waterborne acrylic technology. The resulting coating delivers good
Delta Intercontinental Pte Ltd Tel : Fax: Woodlands Industrial Park E1, #
Impact, tear and abrasion resistant. Excellent corrosion protection. Low permeability. Fast reactivity and cure time with no catalysts. Applicable in temperatures from -30C to 70C. Almost immediate return-to-service
Imron 2.1 HG-C High Gloss Polyurethane Clearcoat
Imron 2.1 HG-C High Gloss Polyurethane Clearcoat GENERAL DESCRIPTION Imron 2.1 HG-C High Gloss Aliphatic Polyurethane Clearcoat is a high-solids, two-package, VOC conforming, 2.1 lbs./gal, very low HAPS
Replacing Dirty and Toxic with Clean and Green. David Pasin, President and Founder TBF Environmental Technology Inc.
Replacing Dirty and Toxic with Clean and Green David Pasin, President and Founder TBF Environmental Technology Inc. TBF Environmental Technology Inc. Develops, manufactures, markets, and distributes environmentally-friendly
As a high performance anti-graffiti clear-coat or top-coat, as needed over any properly substrate where:
AG800 ANTI-GRAFFITI CLEAR NORTHSTAR Superior Performance Transportation Anti-Graffiti Clear Coat Description: AG800 is a premium, high solids clear coat that offers outstanding chemical resistance, gloss
Opening the Door to High Performance at Low VOC. All acrylic resin delivering high performance at low VOC for satin through gloss paints
Acronal Optive 130 Opening the Door to High Performance at Low VOC All acrylic resin delivering high performance at low VOC for satin through gloss paints Acronal Optive 130 latex represents the leading
COATINGS ALKYD POLYESTERS POLYOLS FOR POLYURETHANES POLYMERIC RESINS
COATINGS ALKYD POLYESTERS POLYOLS FOR POLYURETHANES POLYMERIC RESINS 1 // NATUREWORKS PERFORMANCE CHEMICALS ALKYD POLYESTERS CREATING PERFORMANCE THROUGH CHEMISTRY Building upon decades spent advancing
Selection of DODGE E-Z KLEEN Polymer and Stainless Steel Housed Ball Bearings. P = (X x F R ) + (Y x F A ) F A C o
Selection of DODGE and Stainless Steel Housed Ball Bearings DODGE ball bearings are primarily designed for radial loading. However, they have the capacity to carry thrust loads and combined radial/thrust
Eastman specialty ketones Enabling low-voc refinish coatings
Eastman specialty ketones Enabling low-voc refinish coatings Situation assessment What s driving the adoption of low-voc refinish coating technology? National consumption tax and emission charge + Mandatory
TUFCOTE 3.3 PR HIGH SOLIDS FAST DRY ALKYD PRIMER (formerly DuPont 681 FD )
TUFCOTE 3.3 PR (formerly DuPont 681 FD ) Tufcote 3.3 PR is an phenolic modified medium oil, lead and chromate free, single-package, VOC conforming primer (3.3 lbs./gal.) based on DuPont alkyd technology.
Application Data Sheet. Chemical Compatibility Chart. IND-AS EN-01 (May, 2014) Metals Plastics Seals KEY. Good. Fair. Ethylene Propylene.
Chemical Compatibility Chart 6 Stainless Acetic Acid Acetone Acetylene Acidic Mine Water Acrylonitrile Ammonium Chloride Ammonium Hydroxide Ammonium Sulfate Ammonium Thio-Sulfate Anhydrous Ammonia Anhydrous
Imron 3.5 HG-C High Gloss Polyurethane Clear
Imron 3.5 HG-C High Gloss Polyurethane Clear GENERAL DESCRIPTION A high gloss, two-package, 3.5 lbs./gal VOC conforming aliphatic polyurethane enamel clear based on unique Axalta resin technology, producing
Turbo-Coat HV Acrylic Conformal Coating
Product Information Turbo-Coat HV Acrylic Conformal Coating 2109 2110 (Turbo-Coat Thinner) Introduction Techspray s new Turbo-Coat HV Acrylic Conformal Coating is a high viscosity version of our popular
NAVSEA REVIEWED ASTM F-718. Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White / MS203R Yellow / MS218H Part B
ASTM F-718 ITW Engineered Polymers, American Safety Technologies (AST) MS-200 Acrylic Epoxy Color Topping PRODUCT DESIGNATIONS Part A: MS-200 / MS209R D. Gray / MS207R Green / MS205R Red / MS201R White
SMART TRUCK BED LINER - TINTABLE
SMART Truck Bed Liner (SMT93) is a durable K polyurethane coating that provides surfaces with a protective barrier. SMART Black Truck Bed Liner (SMT930) is also available. One Kit of SMART Bed Liner includes:
EF 8 EF 9. Company name Idemitsu Nippon Oil Cosmo Oil Showa Shell Sekiyu TonenGeneral Sekiyu Japan Energy
2 3 4 5 6 7 8 9 Company name Idemitsu Nippon Oil Cosmo Oil Showa Shell Sekiyu TonenGeneral Sekiyu Japan Energy Turbine oil P-32 Turbine oil 32 Turbine 32 Turbine oil 32 R turbine oil 32 Turbine oil 32
Replenishment Data. Environmental Data. Material Safety Data Sheets. opyright 2000
Process Control Application Data Tank Control Replenishment Data Environmental Data Control Additives Toiuch-ups Material Safety Data Sheets opyright 2000 PPG INDUSTRIES, Inc. 151 Colfax Street Springdale,
P HS EXPRESS CLEARCOAT
PDS N5.9.4C December 2011 P190-6800 HS EXPRESS CLEARCOAT PRODUCT DESCRIPTION P190-6800 HS Express Clearcoat is a high quality urethane clearcoat specifically developed for use over Aquabase Plus and 2K
Sign Maintenance Instructions
Chapter 4 Instructions This guide describes common maintenance procedures for your Aurora, Polaris or Light Box Sign. 1-800-285-2504 ebscosigns.com Rev1802 Intentionally Left Blank 1. Preventative Maintenance
NAVSEA REVIEWED ASTM F-718. MS-440G LR, Low Radar Signature Epoxy Nonskid Deck Coating
ASTM F-718 ITW Engineered Polymers, American Safety Technologies MS-440G LR, Low Radar Signature Epoxy Nonskid Deck Coating PRODUCT DESIGNATIONS Part A: Dark Gray MS434R Part B: MS432H MIL-PRF-24667 If
1920 Leonard Avenue Columbus, OH
1920 Leonard Avenue Columbus, OH 43219 800.848.1898 614.253.8511 POLYMERS 1920 Leonard Avenue Columbus, Ohio, 43219 800-848-1898 614-253-8511 CONTENTS: Coconut Alkyds...12 Long Oil Alkyds... 3,4 Compliant
Ultem* sheet. Safe and Sound. High performance opaque sheet for aircraft and train interiors
Ultem* sheet Safe and Sound High performance opaque sheet for aircraft and train interiors 2 SABIC Innovative Plastics Introduction SABIC Innovative Plastics Ultem* sheet products are based on the company
ALI Hindered Amino Resins - Polyaspartic Coating Technology
Providing Solutions Through Technology ALI Hindered Amino Resins - Polyaspartic Coating Technology For Coatings That Require Rapid Cure Low to No VOC Systems Good UV Resistance Good Chemical Properties
ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ TT-T-306E May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION
ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION THINNER, SYNTHETIC RESIN ENAMELS This specification has been approved by the Commissioner,
SMART TRUCK BED LINER - BLACK
SMART Truck Bed Liner (SMT930) is a durable K polyurethane coating that provides surfaces with a protective barrier. SMART Tintable Truck Bed Liner (SMT93) is also available. One Kit of SMART Bed Liner
Table of Contents. 1. Introduction Structure Material Characteristics
1 Table of Contents 1. Introduction Structure Material Characteristics 2. Standard belt type and Belt order code Standard belt type & Belt width Order Code 3. Application 1) Open Ended Applications 2)
SilFORT* SHP401. Technical Data Sheet. SilFORT* SHP401. Description SilFORT AS4000 Hard Coat
Technical Data Sheet SilFORT* SHP401 SilFORT* SHP401 Description SilFORT AS4000 premium-performance hard coat is a clear, non-yellowing silicone coating which provides optimal protection against deterioration
MITSUBISHI ELECTRIC E1071. Installation manual. English MA00777A
MITSUBISHI ELECTRIC MA00777A 2006-04 E1071 Installation manual English Foreword Installation manual for the E1000 series operator terminals Foreword The E1000 operator terminal is developed to satisfy
BERKELEY SSCX SERIES CENTRIFUGAL PUMPS
BERKELEY SSCX SERIES CENTRIFUGAL PUMPS WWW.BERKELEYPUMPS.COM REMARKABLE RELIABILITY High-head performance and quiet operation join corrosion-resistant dependability with Berkeley SSCX Series centrifugal
P17 plugs, mobile sockets and surface-mounting sockets «New range 16 and 32 A»
87045 LIMOGES Cedex Telephone : + 33 0 5 55 06 87 87 - Fax : + 33 0 5 55 06 88 88 P7 plugs, mobile and surface- Cat. Nos. : 555 53/57/58/73/77/78-5 53/57/58/73/77/78 CONTENTS Page 575 4. Definition....
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005. ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI Kevin Wendt Phone: MECHANICAL
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 ACT TEST SERVICES 273 Industrial Drive Hillsdale, MI 49242 Kevin Wendt Phone: 517 439 1485 MECHANICAL Valid To: November 30, 2014 Certificate Number: 2745.01
SECTION 118 ASPHALT MATERIAL
SECTION 118 ASPHALT MATERIAL 118.1 GENERAL REQUIREMENTS Transporting conveyances for asphalt material shall be free of contaminating material. A record of material hauled the previous load in truck transport
FEDERAL SPECIFICATION METHANOL (METHYL ALCOHOL) 1.1 Scope. This specification covers three grades and four unit quantities of methanol.
NOT MEASUREMENT SENSITIVE 19 January 2016 SUPERSEDING O-M-232L 4 January 2006 FEDERAL SPECIFICATION METHANOL (METHYL ALCOHOL) The General Services Administration has authorized the use of this federal
Marina Cabinets LIMOGES Cedex Telephone: Fax:
87045 LIMOGES Cedex Telephone: 0 5 55 06 87 87 - Fax: 0 5 55 06 88 88 Marina s CONTENTS Page 1. Main characteristics...1 2. Range....1 3. Technical characteristics...1 4. Dimensions....3 5. Equipments...4
Master Catalogue I August 2011
Master Catalogue I August 2011 Greasing Equipment Drum Pumps Hose Reels Vehicle Hoists Wheel Service Equipment Lubrication Systems Chemical & Solvent 41 NDP-15FVT 1/2 Chemical Suitable for the transfer
High Temperature Marker Tag
Tinley Park, IL 0487 High Temperature Marker Tag This specification is intended to outline the physical and chemical properties of PANDUIT s material for identification purposes. Printable Material Suffixes
Imron 3.4 HG-C High Gloss Polyurethane Clear
Imron 3.4 HG-C High Gloss Polyurethane Clear GENERAL DESCRIPTION A high gloss, two-package, 3.4 lbs./gal VOC conforming aliphatic polyurethane enamel clear based on unique Axalta resin technology, producing
Tank Truck Product Integrity Protection Guidelines 4 th Edition, Revision 1 August 27, Normal Alpha Olefins Polyalphaolefins
Tank Truck Product Integrity Protection Guidelines 4 th Edition, Revision 1 Normal Alpha Olefins Polyalphaolefins These Product Integrity Protection Guidelines (Guidelines) have been developed to assist
RHEOLATE 350 D. Non-ionic associative thickener based on Polyether Polyol (PEPO) technology for parquet lacquers
Rheology leadership plus so much more... Application Leaflet February 214 Key Benefits RHEOLATE 35 D Provides Newtonian flow and high-shear viscosity Excellent flow and levelling No influence on film properties
LLumar Self-Healing Platinum Paint Protection Film
Technical Reference Tack solution: alcohol to water ratio with > 90% isopropyl alcohol Recommended 10% alcohol (or less) to 90% water Maximum 20% alcohol to 80% water Not recommended > 30% alcohol to 70%
COMMERCIAL ITEM DESCRIPTION SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT
METRIC A-A-3164A April 18, 2007 SUPERSEDING A-A-3164 August 20, 1998 COMMERCIAL ITEM DESCRIPTION SYNTHETIC LACQUER, CAMOUFLAGE, EXTERIOR, VOC COMPLIANT 1. SCOPE. This description covers a lusterless (flat)
NAVSEA REVIEWED ASTM F-718. Part A: 600D02 (Gray); 600D30 (Light Gray); and 600T04 (Buff) Part B: 610C02
Randolph Products ASTM F-718 Randogrip Metal Primer PRODUCT DESIGNATIONS Part A: 600D02 (Gray); 600D30 (Light Gray); and 600T04 (Buff) Part B: 610C02 MIL-PRF-24667 If this product is to be applied as part
PRODUCT DATA SHEET SP-1386
DESCRIPTION: ADVANTAGES: SP-1386 is a hybrid two-component elastomeric polyurethane coating designed for long-term corrosion protection of steel and concrete substrates. SP-1386 is available in Spray Grade
Award (Y / N) Reason UOM Supplier Qty Price
Garland Independent GISD Sourcing Bid Tab Bid#: 31605 Title: 227-16 PAINT AND SPECIAL TINTS Quote# Vendor / Supplier EPCNT Discount 472189 Yes 35% 472165 CO Yes 0% discount, quantity dis 471144 Yes 30-40
DMS-8100, Structural Paints
DMS-8100, Structural Paints Overview (Formerly D-9-8100, Structural Paints). Effective Date: November 1999 May 2003. This specification describes the requirement for the materials, composition, manufacture,
P17 Tempra Pro plugs, mobile sockets, fixed sockets, surface mounting sockets and appliance inlets - IP 66/67-63 A A
CONTENTS Page 5 555 09 5 555 29 5 555 59 5 555 9 1. General characteristics...1 2. Use...1 3. Range/Equivalence table...2 4. Dimensions..............................3 5. Technical characteristics...5 6.
SHEET FED OFFSET INK. TOYO Printing Inks Smarter Sheet-Fed Offset Printing Solutions
SHEET FED OFFSET INK TOYO Printing Inks Smarter Sheet-Fed Offset Printing Solutions Vegetable/mineral oil based, flexible mixing base system allows to prepare all Pantone and spot colors. MIXING BASES
Sportworks Northwest, Inc. General Guidelines Inspection: Cleaning: Graffiti Removal: Sticker Removal:
CARE AND MAINTENANCE OF SPORTWORKS BIKE RACKS General Guidelines In order to maintain optimum appearance of Sportworks bike racks, regardless of material and/or finish, it is important that care be taken
10P20-44 High Solids Epoxy Primer
Product Group High solids epoxy primer Characteristics Product Information - A high solids urethane compatible, Skydrol resistant primer for the exterior of aircraft. It provides excellent corrosion resistance
MasterProtect 1870 / 1880
DESCRIPTION is a polysulfide based, chemical resistant two-component coating material for the systems MasterProtect 7800 and. FIELD OF APPLICATION is used as the impervious coating on MasterProtect 1860
RPL "Raised Panel Label"
Product Data Application Method - RPL (Raised Panel) Labels are innovative labels specifically designed to replace engraved and plotted plates for the identification of electrical components, electrical
HYPRA Prisinter 16/32/63 A
8704 LIMOGES Cedex Telephone: + 33 0 06 87 87 - Fax: + 33 0 06 88 88 HYPR Prisinter 16/32/63 Page 1. General characteristics........1 2. Range......................1 3. Dimensions............... 2-3 4.
Chemical Resistance of Arnitel
Chemical Resistance of Arnitel Chemical resistance of any material is a function of the interactions that occur between the polymer and a chemical in contact. The chemical resistance or the lack of it
material handling optibelt rr / rr Plus / hrr
material handling optibelt rr / rr Plus / hrr Page 2 optibelt rr / rr Plus round belts 82 yellow For use with small idler pulleys; fl exible at low temperatures; very elastic; low power transmission capacity
Paraplex Resins for Industrial Coatings
Paraplex Resins for ndustrial oatings Paraplex Resins! Unique alkydtype polymeric materials! ommonly known as polyester resins! Soft, flexible resins widely used as plasticizers for more brittle filmforming
1920 Leonard Avenue Columbus, OH
1920 Leonard Avenue Columbus, OH 43219 800.848.1898 614.253.8511 POLYMERS 1920 Leonard Avenue Columbus, Ohio, 43219 800-848-1898 614-253-8511 CONTENTS: Long Oil Alkyds... 3,4 Medium Oil Alkyds... 4,5 Short
Series M and MA Positive Displacement Flow Meters
Series M and MA Positive Displacement low Meters Liquid Controls M and MA Series rotary motion positive displacement (PD) meters offer the ultimate in measurement accuracy for custody transfer of petroleum
DIAPHRAGM PUMPS ENTIRELY IN POLYPROPYLENE. Made in Italy. No. E15/PPB
DIAPHRAGM PUMPS ENTIRELY IN POLYPROPYLENE Made in Italy No. E15/PPB HELP THE NATURE Packaging contains, depending on the articles, one or more of the following materials; they must be recycled in accordance
Awadhoot Shendye Western Michigan University LITHO VARNISH MAKING
Awadhoot Shendye Western Michigan University LITHO VARNISH MAKING LAB SCALE ASSEMBLY COMPONENTS OTHER EQUIPMENTS Weighing balance to weight material Thermometer- To measure temperature Hot plate- To supply
NAVSEA REVIEWED ASTM F-718. Chesterton ARC 855N, Ceramic Filled Epoxy Coating
ASTM F-718 ARC Composite Technology Chesterton ARC 855N, Ceramic Filled Epoxy Coating MIL-PRF-32171 If this product is to be applied as part of a coating system, all components of the system must be as
General Information. Typical Physical Characteristics. These typical values should not be interpreted as specifications.
Joncryl HSD 201 Key Features & Benefits Enables higher solids, lower VOC inks High gloss Increased formulation latitude DISPERSION RESIN FOR HIGH SOLIDS, OPAQUE WHITE INKS General Information Typical Appearance
PDS N5.2.1 March AQUABASE Plus Engine Bay Color System PRODUCT DESCRIPTION
PDS N5.2.1 March 2016 AQUABASE Plus Engine Bay Color System PRODUCT DESCRIPTION Aquabase Plus Engine Bay Color System is designed to provide a simple process for repairs involving a specific underhood
To produce them we use high-quality materials and we assign part of our resources to research, development and innovation.
IN SHOWER TRAY Forms and Design in Shower Tray, S.L. has a history going back more than ten years of commitment to the manufacture of shower trays, countertops and linings of mineral filler. We undergo
P17 combined units LIMOGES Cedex Telephone : Fax : Cat. No.(s) : 566 XX XX XX XX
8704 LIMOGES Cedex Telephone : + 33 0 06 87 87 - Fax : + 33 0 06 88 88 P17 combined units Cat. No.(s) : 66 XX - 72 XX - 77 XX - 89 XX CONTENTS Page 1. Description...1 2. Use...1 3. Range.......................
TANK LINING RESISTANCE GUIDE I-19
INTRODUCTION Wattyl s Tank Lining Resistance Guide provides a list of chemicals and their suitability in contact with Epinamel TL710, Galvit ES600 and Galvit ES510. GUIDE TO DATA R Recommended cargo R,
TABLE OF CONTENTS. Firmware Version
TABLE OF CONTENTS Firmware Version...1 Environmental Conditions...1 Electrical Specifications...1 Warnings...2 Section A: Programming the Controller...3 A 1: The Program Menu...3 A 1.1: Entering the Program
NAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 International Paint, LLC INTERFINE 979SG POLYSILOXANE COSMETIC COAT PRODUCT DESIGNATIONS Part A: SYA200 HAZE GREY Part B: SYA056 Curing Agent MIL-PRF-24635 If this product is to be applied as
Priming coat system without chemical influences. Adequate resistance against mineral oils and greases. For indoor applications.
Paint System "G" Priming coat system without chemical influences. Adequate resistance against mineral oils and greases. For indoor applications. Priming coat FEIDOLUX-primer (1 component) Primer based
CONTENTS. 1. Low Molecular Weight Epoxy Resin Halogen Free Flame Retardant Resin Flexible Type Epoxy Resin... 9
CONTENTS 1. Low Molecular Weight Epoxy Resin... 1 1-1. BPA Type 1-2. BPF Type 1-3. Reactive Diluents 1-4. Diluted Type 7. Halogen Free Flame Retardant Resin... 9 8. Flexible Type Epoxy Resin... 9 8-1.
High Gloss Kaolins ASP G90 and ASP G92
High Gloss Kaolins ASP G90 and High Gloss Kaolins ASP G90 and At BASF, we nurture the seeds of ingenuity. You ll find it in how we apply our expertise in surface and materials science to an exhaust stream
Isobutanol. Isobutanol, Isobutyl alcohol, 2-methyl-1-propanol. Molecular formula. CAS-No EC-No
Technical Information Petrochemicals M 2105 e May 2016 Page 1 of 5 Supersedes edition of July 2014 Isobutanol Colorless, mobile solvent of medium volatility. Feedstock for syntheses. Chemical nature Isobutanol,
CORROSION PROTECTION CORROSION PROTECTION FEATURING RUST MORT RUST SEAL RUST TRAP RUST SHIELD RUST PREVENTER CAVITY WAX UNDERCOATINGS COMPARISON CHART
CP 0317 CORROSION PROTECTION CORROSION PROTECTION FEATURING RUST MORT RUST SEAL RUST TRAP RUST SHIELD RUST PREVENTER CAVITY WAX UNDERCOATINGS COMPARISON CHART RUST MORT WHEN TO USE IT: For the conversion
Specialty Colorants. Milliken. For Wood & Wood Related Finishes
Specialty Colorants Milliken For Wood & Wood Related Finishes DYES FOR WOOD COATINGS NEROSOL LIQUID DYES Nerosol Liquid Dyes Our Nerosol concentrates are specially selected predominantly metal complex
Be prepared with Lutz. Safety is our concern
Be prepared with Lutz Safety is our concern L u t z P u m p S e t s L u t z P u m p S e t s Lutz Pump Sets A quick solution for many applications 2 Already pre-assembled Example: Pump set consisting of:
MITSUBISHI ELECTRIC E1032. Installation manual. English MA
MITSUBISHI ELECTRIC MA00816 2006-04 E1032 Installation manual English Foreword Installation manual for the E1000 series operator terminals Foreword The E1000 operator terminal is developed to satisfy the
Permacron Base Coat Series 295
Permacron Base Coat Series 295 GENERAL DESCRIPTION A high quality base coat from our Basis-System for two-stage and three-stage pearl finishes. It is suitable for universal use on all passenger vehicles.
Strength, resilience, rigidity - these are all attributes needed to combat arduous and aggressive conditions. Tufflite has them all.
Strength, resilience, rigidity - these are all attributes needed to combat arduous and aggressive conditions. Tufflite has them all. From commercial applications requiring a simple sealed luminaire, right
INFG-2R 10/10. Gemini & Infinity. Finishing Pumps & Equipment
INFG-2R 10/10 Gemini & Infinity Finishing Pumps & Equipment Pump Basics for Smooth Operation Fluid Characteristics Influence Pump Selection Consider the following fluid characteristics when choosing your
Product Catalogue Industrial Pumps & Metering Systems
Product Catalogue 2017 Industrial Pumps & Metering Systems TABLE OF CONTENTS Applications 4 Pump Packages 5 Drum Pump Motors 9 Pump Tubes (PP, PPS, CPVC, PHT, PVDF) 11 Performance Curves for Centrifugal
Product Catalogue Industrial Pumps & Metering Systems
Product Catalogue 2017 Industrial Pumps & Metering Systems TABLE OF CONTENTS Applications 4 Pump Packages 5 Drum Pump Motors 9 Pump Tubes (PP, PPS, CPVC, PHT, PVDF) 11 Performance Curves for Centrifugal
NAVSEA REVIEWED ASTM F-718. If this product is to be applied as part of a coating system, all components of the system must be as listed on the QPL.
ASTM F-718 International Paint, LLC Intergard 403, Epoxy Anticorrrosive PRODUCT DESIGNATIONS Part A: KBA400 series Part B: KBA403 MIL-PRF-23236 If this product is to be applied as part of a coating system,
NAVSEA REVIEWED ASTM F-718. SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue
ASTM F-718 The Sherwin Williams Company SeaVoyage Copper Free Antifoulant PRODUCT DESIGNATIONS SeaVoyage Copper Free Antifoulant; N51R301 Red, N51B301 Black, N51L301 Blue MIL-PRF-24647 If this product
Section 3 - Chemical/Environmental Resistance Part 1 - XR-5 Fluid Resistance Guidelines
Section 3 - Chemical/Environmental Resistance Part 1 - XR-5 Fluid Resistance Guidelines The data below is the result of laboratory tests and is intended to serve only as a guide. No performance warranty
Process Equipment. Air-Operated Pumps for Process Industries
Process Equipment Air-Operated s for Process Industries Superior ing Technology 55 Gallon Drum Transfer and Supply from your 55 gallon drums with our double diaphragm or piston evacuation pumps. They offer
Safety Products brochure 11 Int INDEX. Exhaust Filters 2. Air Inlet Valve 5. GL45 Caps 6. DIN50 Caps 8. GL38 Caps 10. DIN60 Caps 11.
INDEX Safety Products brochure 11 Int Exhaust Filters 2 Air Inlet Valve 5 GL45 Caps 6 DIN50 Caps 8 GL38 Caps 10 DIN60 Caps 11 S51 / S61 Caps 12 B53 / B83 / GL80 Caps 13 Chemical Resistance chart 14 VICI
Vehicle Care ! WARNING: CLEANING PRODUCTS CLEANING THE EXTERIOR
Chapter 8! WARNING: Many liquids and other substances used in vehicles are poisonous and should never be consumed and must be kept away from open wounds. These substances include antifreeze, brake fluid,
Fix It Right. Professional Products
Professional Products Fix It Right Penetrants, lubricants, rust inhibitors and a full line of specialty formulas for the automotive, industrial and hardware industries. The B laster Corporation is a world-class
Sign Maintenance Instructions
Chapter 4 Sign Maintenance Instructions This guide describes common maintenance procedures for your DayStar, TekStar, Changeable Letter or Light Box Sign. 1.800.237.3928 stewartsigns.com Rev1802 Intentionally
Directive 1999/13/EC, SED: max g/kg max g/l (approx. 2.6 lb/us gal) 6.6 m²/l for 100 µm (265 ft²/us gal for 4.
DESCRIPTION Two-component, high-build, amine adduct-cured novolac phenolic epoxy holding primer PRINCIPAL CHARACTERISTICS Primer coat in the PHENGUARD tank coating system Excellent resistance to a wide
Safety Products brochure 11 Int INDEX. Exhaust Filters 2. Air Inlet Valve 5. GL45 Caps 6. DIN50 Caps 8. GL38 Caps 10. DIN60 Caps 11.
INDEX Safety Products brochure 11 Int Exhaust Filters 2 Air Inlet Valve 5 GL45 Caps 6 DIN50 Caps 8 GL38 Caps 10 DIN60 Caps 11 S51 / S61 Caps 12 B53 / B83 / GL80 Caps 13 Chemical Resistance chart 14 VICI
SIGMADUR PRODUCT DATA SHEET December 12, 2014 (Revision of January 1, 2013) DESCRIPTION. Two-component, high solids polymeric urethane
DESCRIPTION Two-component, high solids polymeric urethane PRINCIPAL CHARACTERISTICS Excellent resistance to atmospheric exposure conditions Outstanding color and gloss retention Non-chalking, non-yellowing
Solvent Dyes (Polypon):
Solvent Dyes (): dyes are brilliant metal complex dyes with good solubility in cello solve and in many other solvents. dyes are particularly suitable for the production of transparent and lightfast shades
RULE 4612 MOTOR VEHICLE AND MOBILE EQUIPMENT COATING OPERATIONS (Adopted September 21, 2006; Amended September 20, 2007; Amended October 21, 2010)
RULE 4612 MOTOR VEHICLE AND MOBILE EQUIPMENT COATING OPERATIONS (Adopted September 21, 2006; Amended September 20, 2007; Amended October 21, 2010) 1.0 Purpose The purpose of this rule is to limit volatile