INSTALLATION INSTRUCTIONS

Size: px

Start display at page:

Download "INSTALLATION INSTRUCTIONS"

Russell Patrick
5 years ago
Views:

1 INSTALLATION INSTRUCTIONS Accessory SEAT S Application 2014 CIVIC 4-DOOR Publications No. AII Issue Date FEB 2014 PARTS LIST Seat Cover Kit (60/40 Split Fold-Down Rear Seat-Back) P/N 08P32-TR0-100 Seat-back covers Seat Cover Kit (Fold-Down Rear Seat-Back) P/N 08P32-TR0-100A Seat-back covers Left seat side bolster cover Left seat side bolster cover Right seat side bolster cover Right seat side bolster cover Seat cushion cover Armrest cover Seat cushion cover 2014 American Honda Motor Co., Inc. All Rights Reserved. AII (1402) 08P32-TR of 7

2 Seat Cover Kit (Fixed Rear Seat-Back) P/N 08P32-TR0-100B Seat-back covers Fold-Down Rear Seat-Back RIGHT SEAT LEFT SEAT Seat cushion cover TOOLS AND SUPPLIES REQUIRED Utility knife Illustration of the Rear Seat Covers in the Vehicle 60/40 Split Fold-Down Rear Seat-Back SEAT Fixed Rear Seat-Back S QC90302AT RIGHT SEAT LEFT SEAT SEAT S QC90301AT SEAT S QC90303AT 2 of 7 AII (1402) 2014 American Honda Motor Co., Inc. All Rights Reserved.

3 INSTALLATION Installing the Headrest Covers 1. While pressing on each headrest guide knob, remove the three headrests by pulling them upward. 3 S Installing the Seat-Back Covers If the vehicle is equipped with a fixed rear seat-back, go to step 16; otherwise, continue with step 3. With 60/40 Split Fold-Down Rear Seat-Back and Fold-Down Rear Seat-Back 3. Pull out the center seat belt from the seat belt guide. 3 S TAG LEVER (Pull.) Push. KNOB SEAT- BACK 2. Fit three headrest covers over the headrests. QC90304AT CENTER (Pull out.) QC90305AT 4. Open the trunk. Pull the lever, and fold the rear seatback forward American Honda Motor Co., Inc. All Rights Reserved. AII (1402) 3 of 7

4 5. Fit the left seat side bolster cover onto the left seat side bolster through the left seat belt. Insert the tabs to the left seat side bolster. Secure the fasteners to the left seat side bolster. LEFT SEAT SIDE BOLSTER LEFT SEAT 6 TABS LEFT If the vehicle is equipped with a 60/40 split fold-down rear seat-back, continue with step 7; otherwise, go to step 14. With 60/40 Split Fold-Down Rear Seat-Back 7. Fit the left seat-back cover onto the left rear seatback through the center seat belt. Insert the left seat-back cover under each headrest guide. CENTER LEFT 3 FASTENERS QC90306AT 6. Repeat step 5 to install the right seat side bolster cover on the right seat side bolster. LEFT QC90307AT 8. Pull down the armrest, secure the fasteners to the left rear seat-back. LEFT (Pull down.) 14 FASTENERS QC90311AT 4 of 7 AII (1402) 2014 American Honda Motor Co., Inc. All Rights Reserved.

5 9. Fit the right seat-back cover onto the right rear seatback. Insert the right seat-back cover under each headrest guide. 11. Install the armrest cover to the armrest. RIGHT RIGHT QC90308AT 10. Secure the fasteners to the right rear seat-back. QC90313AT 12. Raise the armrest. Pull out the armrest cover between the armrest and left rear seat-back, and secure the fasteners on the armrest cover as shown. RIGHT LEFT 7 FASTENERS FASTENER QC90312AT SEAT QC90314BT 2 FASTENERS 13. Secure the fastener to the left rear seat-back. Go to step American Honda Motor Co., Inc. All Rights Reserved. AII (1402) 5 of 7

6 With Fold-Down Rear Seat-Back 14. Fit the seat-back cover onto the rear seat-back through the center seat belt. Insert the seat-back cover under each headrest guide. CENTER With Fixed Rear Seat-Back 16. If the vehicle is hybrid, remove the piece of the seatback cover that covers the duct: Carefully cut out the overcast stitching with a utility knife. Remove the stitching and the duct cover. STITCHING (Cut.) DUCT (Cut out.) QC90309AT 15. Secure the fasteners to the rear seat-back. Go to step FASTENERS QC90319AT 17. Pull out the center seat belt from the seat belt guide. Fit the seat-back cover onto the rear seat-back through the seat belts. Insert the seat-back cover under each headrest guide. 3 SEAT BELTS QC90315AT QC90310AT 6 of 7 AII (1402) 2014 American Honda Motor Co., Inc. All Rights Reserved.

7 18. Insert the tabs to the rear seat-back. Secure the fasteners to the rear seat-back. 20. Insert the tabs to the rear seat cushion. Secure the fasteners to the rear seat cushion under the seat anchors. 10 TABS 9 FASTENERS SEAT 3 FASTENERS 5 TABS QC90318AT QC90316AT Installing the Seat Cushion Cover 19. Fit the seat cushion cover onto the rear seat cushion. Attach each hook to the rear door sill trim. 21. Secure the center seat belt to the seat belt guide. 22. Reinstall the headrests. SEAT 2 HOOKS SEAT DOOR SILL TRIM QC90317AT 2014 American Honda Motor Co., Inc. All Rights Reserved. AII (1402) 7 of 7

INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS Accessory Application Publications No. AII 27996 ATTACHMENT KIT 2005 CIVIC HYBRID Issue Date AUG 2004 PARTS LIST Changer Attachment Kit: P/N 08B26-S5B-100 4 Washer-screws, 4 x