Weir Type Diaphragm Valves - DIAVAL SERIES W
|
|
- Nicholas Rodney Shelton
- 5 years ago
- Views:
Transcription
1 when necessary. Valves close by turning the handwheel clockwise. Valves are bolted bonnet, seatless design, with a diaphragm as closure element, with rising handwheel. Valves are offered with a broad range of diaphragms and linings materials to resist to abrasion and corrosion duties. The valves are inexpensive and easy to maintain, being the optimal solution for a large number of applications. Yellow position indicator, for clear and positive valve position from any angle Ergonomic and rugged rising handwheel Nameplate incl. batch no. for full traceability Closure Diaphragms; manufactured from elas- bon materials; provide 100% seating tightness in both directions while isolating the valve trim of polymers to satisfy any industrial application Grease reservoir integrated in the spindle chamber that lubricates the spindle along operations thus avoiding valve spindle jamming Witness hole to detect leakage at diaphragm failure Precise compressor plate; guide and operates the diaphragm up and down rubber lined valves as standard Porousless linings; provides the application engineer with a wide choice of linings of high chemical and abrasion resistance without need of expensive basic metal valve materials Main Features Valve Design: EN Face to face length: EN558 Series 1 (DIN3202F1) or EN558 Series 7 (BS5156) Valve end connections: Flanged to EN type 21/B, PN10/16 (DN15-150); PN10 (DN ) (valves DN65 with 4 holes as accepted variant in standard) Female thread to ISO (DIN259-BSPP) Marking: EN19 Pressure Tests: EN Seat leakage rate: Rate A (full seat tightness in both directions) Inside and outside primer paint layer black color for protection during storage and transport Product compliant with Pressure Equipment Directive PED, max. category I Options Other materials, other ratings and connexions, pneumatic or electric atuator, limit switches, sealed bonnet, interlocking arrangement, padlocking or handwheel hood to avoid non-authorized operation. Please consult us 1 Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on
2 Main Duties / imits of use iquids compatible with materials of construction, acc. to PED Annex II tables 8 & 9 up to category I Rubber Diaph. DN15-50 PS:16 bar (no CE marking) DN PS:10 bar (no CE marking) DN200 PS:6 bar (no CE marking) DN250 PS:5 bar (no CE marking) DN300 PS:4 bar (no CE marking) PTFE Diaph. DN PS:10 bar (no CE marking) DN150 PS:6 bar (no CE marking) Combination of Body + ining + Diaphragm establish the P-T limit of use of the valve Questions referring to chemical resistance, please consult us Observe also pressure/temperature limits on diagrams under Bodies (Ductile iron) inings Diaphragms Brief Peak Temperature (less than one hour) Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on 2
3 Weir Type Diaphragm Valves - DIAVA SERIES W 3 3 /h) Weir Type DN15 Weir Type DN20 Weir Type DN25 Weir Type DN32 Weir Type DN40 Weir Type DN50 Weir Type DN65 Weir Type DN80 Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on
4 Weir Type Diaphragm Valves - DIAVA SERIES W 3 /h) Weir Type DN100 Weir Type DN125 Weir Type DN150 Weir Type DN200 Weir Type DN250 Weir Type DN300 Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on 4
5 Main Parts and Materials 1 2 DIAPHRAGM BODY WC_ Cast Iron EN-J1040 (GG25) WD_ RUBBER Ductile Iron EN-JS1030 (GGG40) Natural (D10) / EPDM (D20) / Butyl (D30) / Nitrile (D40) / Neoprene (D50) / Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) 3 COMPRESSOR Cast Iron EN-J1040 (GG25) 4 BONNET WC_ WD_ Cast Iron EN-J1040 (GG25) Ductile Iron EN-JS1030 (GGG40) 5 SPINDE Steel 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel (EN42) 8 BODY STUDS Steel 9 BODY NUTS Steel 10 THRUST WASHER NYON 11 COMP. PIN Steel (EN42) FANGED ENDS TO EN PN10 FANGED ENDS TO ASA150#* Approx. Weight DN BS DIN a ØW ØD C ØR f nxød 4x14 4x14 4x14 4x18 4x18 4x18 4x ØD C 11,5 11,5 11, , ,5 ØR f 1,6 1,6 1,6 1,6 1,6 1,6 1,6 nxød 4x16 4x16 4x16 4x16 4x16 4x19 4x19 60,3 69,8 79,4 88,9 98,4 120,6 139,7 BS 2,3 3,2 4,2 6,4 7, DIN 2,7 3,5 4,4 6,6 8,5 12, Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on
6 DN BS DIN a 190 Ø230 Ø265 Ø320 Ø420 Ø502 Ø569 ØW ØD C ØR f nxød 8x18 8x18 8x18 8x22 8x22 12x22 12x ØD C 19, , ,5 32 ØR f 1,6 1,6 1,6 1,6 1,6 1,6 1,6 nxød 4x19 8x19 8x22 8x22 8x22 12x22 12x22 152,4 190,5 215,9 241,3 298,4 361,9 431,8 BS FANGED ENDS TO EN PN10 FANGED ENDS TO ASA150#* Approx. Weight DIN Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on 6
7 Main Parts and Materials 1 BODY 1A 2 INING DIAPHRAGM + BACKING WC_ WD HR SR BR ER N_ RUBBER Cast Iron EN-J1040 (GG25) Ductile Iron EN-JS1030 (GGG40) Hard Rubber Soft Rubber Butyl Rubber EPDM Rubber Neoprene Rubber Natural (D10) / EPDM (D20) / Butyl (D30) / Nitrile (D40) / Neoprene (D50) / Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) 3 COMPRESSOR Cast Iron EN-J1040 (GG25) 4 BONNET WC_ Cast Iron EN-J1040 (GG25) WD_ Ductile Iron EN-JS1030 (GGG40) 5 SPINDE Steel/ Acero 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel (EN42) 8 BODY STUDS Steel 9 BODY NUTS Steel 10 THRUST WASHER NYON 11 COMP. PIN Steel (EN42) FANGED ENDS TO EN PN10 FANGED ENDS TO ASA150#* DN BS DIN f a ØW ØD C nxød 4x14 4x14 4x14 4x18 4x18 4x18 4x ØD C 11,5 11,5 11, , ,5 nxød 4x16 4x16 4x16 4x16 4x16 4x19 4x19 60,3 69,8 79,4 88,9 98,4 120,6 139,7 Approx. BS 3,2 3,4 4,7 7 8, Weight DIN 3,5 3,7 5 8,2 9,5 13,3 22,5 7 Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on
8 R FANGED ENDS TO EN PN10 FANGED ENDS TO ASA150#* Approx. Weight DN BS DIN f a 190 Ø230 Ø265 Ø320 Ø420 Ø502 Ø569 ØW ØD C nxød 8x18 8x18 8x18 8x22 8x22 12x22 12x ØD C 19, , ,5 32 nxød 4x19 8x19 8x22 8x22 8x22 12x26 12x26 152,4 190,5 215,9 241,3 298,4 361,9 431,8 BS DIN 28, Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on 8
9 Main Parts and Materials 1 BODY Ductile Iron EN-JS1030 (GGG40) 1A INING PF PFA ET ETFE 2 DIAPHRAGM + BACKING Natural (D10) / EPDM (D20) / Butyl (D30) / RUBBER Nitrile (D40) / Neoprene (D50) / Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) 3 COMPRESSOR Cast Iron EN-J1040 (GG25) 4 BONNET Ductile Iron EN-JS1030 (GGG40) 5 SPINDE Steel 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel (EN42) 8 BODY STUDS St. Steel SS304 9/9A BODY NUTS St. Steel SS THRUST WASHER NYON 11 COMP. PIN Steel (EN42) FANGED ENDS TO EN PN10 FANGED ENDS TO ASA150#* DN BS DIN f a ØW ØD C ØR nxød 4x14 4x14 4x14 4x18 4x ØD C 11,5 11,5 11, ,5 ØR nxød 4x16 4x16 4x16 4x16 4x16 60,3 69,8 79,4 88,9 98,4 Approx. BS 3,2 3,4 4,7 7 8,5 Weight DIN 3,5 3,7 5 8,2 9,5 9 Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on
10 FANGED ENDS TO EN PN10 FANGED ENDS TO ASA150#* Approx. Weight DN BS DIN f a Ø230 Ø265 Ø320 ØW ØD C ØR nxød 4x18 4x18 8x18 8x18 8x18 8x ØD C 16 17,5 19, ,5 ØR nxød 4x19 4x19 4x19 8x19 8x22 8x22 120,6 139,7 152,4 190,5 215,9 241,3 BS DIN 13,3 22,5 28, Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on 10
11 Main Parts and Materials 1 BODY WCH_ Cast Iron EN-J1040 (GG25) Halar WDH_ Ductile Iron EN-JS1030 (GGG40) lined Natural (D10) / EPDM (D20) / Butyl (D30) / RUBBER Nitrile (D40) / Neoprene (D50) / 2 DIAPHRAGM Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) 3 COMPRESSOR Cast Iron EN-J1040 (GG25) 4 BONNET WCH_ Cast Iron EN-J1040 (GG25) WDH_ Ductile Iron EN-JS1030 (GGG40) 5 SPINDE Steel 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel/Acero (EN42) 8 BODY STUDS St. Steel SS304 9 BODY NUTS St. Steel SS THRUST WASHER NYON 11 COMP. PIN Steel (EN42) DN BS DIN a ØW ØD C ØR f nxød 4x14 4x14 4x14 4x18 4x ØD C 11,5 11,5 11, ,5 ØR f 1,6 1,6 1,6 1,6 1,6 nxød 4x16 4x16 4x16 4x16 4x16 60,3 69,8 79,4 88,9 98,4 Approx. BS 2,3 3,2 4,2 6,4 7,5 Weight DIN 2,7 3,5 4,4 6,6 8,5 FANGED ENDS TO EN PN10 FANGED ENDS TO ASA150#* 12 Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on
12 DN BS DIN a Ø230 Ø265 Ø320 ØW ØD C ØR f nxød 4x18 4x18 8x18 8x18 8x18 8x ØD C 16 17,5 19, ,5 ØR f 1,6 1,6 1,6 1,6 1,6 1,6 nxød 4x19 4x19 4x19 8x19 8x22 8x22 120,6 139,7 152,4 190,5 215,9 241,3 BS FANGED ENDS TO EN PN10 FANGED ENDS TO ASA150#* Approx. Weight DIN 12, Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on 13
13 Main Parts and Materials Unlined threaded valves WC_ Cast Iron EN-J1040 (GG25) 1 BODY WD_ Ductile Iron EN-JS1030 (GGG40) WS_ St. Steel 2 DIAPHRAGM RUBBER Natural (D10) / EPDM (D20) / Butyl (D30) / Nitrile (D40) / Neoprene (D50) / Hypalon (D60) / Viton (D70) PTFE + EPDM (D92) / PTFE + Butyl (D93) / PTFE + Viton (D97) 3 COMPRESSOR Cast Iron EN-J1040 (GG25) WC_ Cast Iron EN-J1040 (GG25) 4 BONNET WD_ Ductile Iron EN-JS1030 (GGG40) WS_ St. Steel 5 SPINDE Steel 6 HANDWHEE Cast Iron EN-J1040 (GG25) 7 H/W DOWE PIN Steel (EN42) 8 BODY STUDS Steel 9 BODY NUTS Steel 10 THRUST WASHER Nylon DN ØW e Approx. Weight 1,2 1,5 2 3, Copyright VATORQUE Valves kft - Data subject to revision - Regularly updated data on
Unlined valves with flanged ends
Main Parts and Materials Unlined valves with flanged ends NO. PART MATERIA 1 2 DIAPHRAGM BODY WC_ Cast Iron EN-J1040 (GG25) WD_ RUBBER Ductile Iron EN-JS1030 (GGG40) Natural (D10) / EPDM (D20) / Butyl
More informationDiaphragm Valves. Product information
Diaphragm Valves Product information ART 510 Diaphragm Valve Weir Type Features Screwed BSP Taper Ductile Iron Body Rising Handwheel Indicator Bonnet Diaphragm Available Grade A - Natural Rubber Grade
More informationUniwat. Resilient Seated Gate Valves
Uniwat Resilient Seated Gate Valves www.comeval.es Resilent Seated Gate Valves - UNIWAT 504/507 Copyright COMEVAL VALVE SYSTEMS - Data subject to revision - Regularly updated data on www.comeval.es - DS01
More informationBUTTERFLY VALVE 17 SERIES Gearbox
DN H1 H2 H3 BUTTERFLY VALVE 17 SERIES Gearbox FIGURE: 17234ER: 17234BR: 17234VR: Seat in EPDM, with gearbox Seat in Buna, with gearbox Seat in Viton, with gearbox B ØR L DIMENSIONS: (mm) DN L B XR H1 H2
More informationDIAPHRAGM VALVES b y H a k o h a v V a l v e s
b y H a k o h a v V a l v e s DIAPHRAGM VALVES by Hakohav Valves ABOUT US QUALITY RELIABILITY Kim Valves started up as Hakohav Valves in 1963 by two young visionary engineers who set their goal to become
More informationTechnical Manual. Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing)
Page: 1 Contents Register 24 CONTENTS - ARV2-TAT (TAT = Type Acceptance Testing) Page Technical Data ARV2-TAT-DIN...2 Technical Data ARV2-TAT-ANSI...3 Material Specification ARV2-TAT...4 Dimensions ARV2-TAT-DIN...5
More informationTechnical Manual. Register 8 CONTENTS - ARV2
Page: 1 Register 8 CONTENTS - ARV2 Contents Page Technical Data ARV2-DIN... 2 Technical Data ARV2-ANSI... 3 Material Specification ARV2... 4 Dimensions ARV2-DIN... 5 Dimensions ARV2-ANSI... 6 Spare Parts
More informationCast Iron Valves. Product Information. It s all at Albion
Cast Iron Valves Product Information It s all at Albion ART 77-78 Cast Iron Ball Valve Flanged Ends Flange Mounting PN16 Only ISO 5211 Direct Mount (Not 200mm) Art 77/78 Plated Brass/Stainless Ball BS
More informationTechnical Manual. Register 25 CONTENTS - AKH2-TAT
D-88 Ahaus Postfach 112 D-81 Ahaus Telefon: +9(0) 21-8-100 Fax: +9(0) 21-8-200 Register: 2 Page: 1 Date: 0.2008 Contents Register 2 CONTENTS - AKH2-TAT (TAT = Type Acceptance Testing) Page Technical Data
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off on
More informationWAFER STYLE KNIFE GATE VALVE
11 WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationLATEST ARRIVALS CATALOGUE STOCK
LATEST ARRIVALS CATALOGUE STOCK PIPES VALVES FLANGES & FITTINGS IN CARBON STEEL STAINLESS STEEL LATEST ARRIVALS!!!!!! VALVE PRODUCTS CAST IRON WAFER TYPE BUTTERFLY VALVE, PINLESS SHAFT, DUCTILE NICKEL
More informationTechnical changes kept in reserve WAFER STYLE KNIFE GATE VALVE. DN 50 to DN 250: 10 kg/cm² DN 300 to DN 400: 6 kg/cm²
WAFER STYLE KNIFE GATE VALVE The A model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut off
More informationSeries 240 Pneumatic On-off Valve Type 3351
Series 240 Pneumatic On-off Valve Type 3351 Application Control valve with a tight shutoff of liquids, gases and steam in accordance with DIN or ANSI standards Nominal sizes DN 15 to 100 NPS ½ to 4 Nominal
More informationARI-STEVI 470 / 471 (DN15-150)
With pneumatic and electric actuators ARI-STEVI 470 / 471 (DN15-150) Control valve - straight through with screwed seat ring, shaftguided plug and blow-out protected stem ARI-STEVI 470 / 471 Pneumatic
More informationDiaphragm Valve SISTO-16. PN16 Maintenance-free With or without Lining Flanged Ends With Handwheel or Actuator. Type Series Booklet
Diaphragm Valve SISTO-16 PN16 Maintenance-free With or without Lining Flanged Ends With Handwheel or Actuator Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16 All rights reserved.
More informationTechnical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE
Technical changes kept in reserve THROUGH CONDUIT KNIFE GATE VALVE The B model knife gate is a bi-directional wafer valve designed for media with high consistency. The double seat design assures a non-clogging
More informationDifferential pressure relief controller AFPA / VFG 2 (VFG 21)
Differential pressure relief controller AFPA / VFG 2 (VFG 21) Description AFPA VFG2 (VFG 21) is a self-acting differential pressure relief controller primarily for use in district heating systems. The
More informationKDV - Kim Diaphragm Valves Straight Through Type (ST) Straight Through Type ST. Diaphragm Valves. 1
KDV - Kim Diaphragm Valves Straight Through Type (ST) Straight Through Type ST Diaphragm Valves 1 KDV: A Passion for Perfection KDV established in Australia in 1979, specialises in the manufacture and
More informationType / Material code Body* Disc Stem Lining**
Design butterfly valve is designed with lug or flange connection. Lug connection in dimensions DN 32-300, flange connecton DN 300-1000. is available in pressure ratings PN 10 /16 according to dimension.
More informationSTRAIGHT THROUGH (SO-TYPE) DIAPHRAGM VALVE
STRAIGHT THROUGH (SO-TYPE) DIAPHRAGM VALVE 1. MOC: SG42 Cast iron 1. Higher pressure tolerance 2. Straight-through passage 2. 100% SA manufactured 3. Robust construction 3. Easy interchangeability of parts
More informationUNIWORLD series PNEUMATIC VALVES
UNIWORLD series PNEUMATIC VALVES 5100AD/E 07 2013 SINGLE SEAT TWO WAY ON-OFF VALVES PED 97/23/CE / ATEX 94/9/CE / MACHINERY DIRECTIVE 2006/42/CE TYPE 5100 AD Normally open air closes Face-to-face ASME
More informationWAFER STYLE KNIFE GATE VALVE
WAFER STYLE KNIFE GATE VALVE The EX(SER.10) model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging
More informationWAFER STYLE KNIFE GATE VALVE
MODEL WAFER STYLE KNIFE GATE VALVE The model knife gate is an uni-directional wafer valve designed for general industrial service applications. The design of the body and seat assures non-clogging shut
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The C model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). makes it ideal for use
More informationTechnical Manual. Register 10 CONTENTS - ASG
Page: 1 Contents Register 10 CONTENTS - ASG Page Technical Data ASG-DIN...2 Technical Data ASG-ANSI...3 Material Specification ASG...4 Dimensions ASG-DIN...5 Dimensions ASG-ANSI...6 Spare Parts ASG...7
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationCatalogues. Reliable Flow Control Solutions. Valve & Automation Systems. A210 New Generation Pneumatic Actuators
Catalogues 2013 Reliable Flow Control Solutions V101 / V102 DN50-1200 Actuator Op. Butterfly Valves V101 (Wafer) V102 (Lug) DN25-1200 Butterfly Valves A210 New Generation Pneumatic Actuators A250 Mechanical
More informationDiaphragm Valve SISTO-16S PN 16 DN Type Series Booklet
Diaphragm Valve SISTO-16S PN 16 DN 15-200 Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16S All rights reserved. The contents provided herein must neither be distributed, copied,
More informationL15 HEAVY DUTY KNIFE GATE VALVE STANDARD PARTS LIST
L15 HEAVY DUTY KNIFE GATE VALVE The L15 model knife gate is a uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body
More informationDual Plate Check Valve
Dual Plate Check Valve Belgicast Model C Ruber-Check Dual plate check valve Wafer type 40/1200 PN 10/16/25/40 Features: Dual plate check valve with soft wafer type seat for fitting between flanges. For
More informationType 3273 Hand-operated Actuator Type 3273 Side-mounted Handwheel
Type 3273 Hand-operated Actuator Type 3273 Side-mounted Handwheel Application Hand-operated actuator or side-mounted handwheel for mounting on control valves, especially Series 240, 250, 260 ), 280 and
More informationMark 608BP Series. Pressure Regulators Mark 608BP Gas Pressure Regulators. Balanced Plug Gas Pressure Regulators. Features
Mark 608BP Series Balanced Plug Gas Pressure Regulators The Mark 608BP Balanced Plug Gas Pressure Regulator is the ideal valve for low pressure gas regulation with higher inlet pressures. The selfcontained
More informationBUTTERFLY VALVE - WAFER FAF 3500
PRODUCTION STANDARDS DN40 DN600 PN 6-10-16 CLASS 150 Design EN 593 Connection Wafer Type ISO 7005-1 EN 1092-1 Face to Face EN 558 Series 20 Marking EN 19 Tests EN 12266-1 Corrosion Protection Electrostatic
More informationBUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
C D E FIGURE: PD: pneumatic actuator, double acting PE: pneumatic actuator, spring return PEO: pneumatic actuator, spring return, normally open BUTTERFLY VALVE 27 SERIES Pneumatic actuator - El-O-Matic
More informationALC-3 BUTTERFLY VALVES NOMINAL PRESSURE NOMINAL SIZE MATERIALS CONNECTIONS DESIGN. ANSI Class PN DN
BUTTERFLY VALVES ALC-3 NOMINAL PRESSURE ANSI Class 150-600 PN 10-100 NOMINAL 2-80 DN 50-2000 MATERIALS Cast Iron Carbon Steel Low Alloy Steel CONNECTIONS Wafer Lugged Flanged Butt Weld DESIGN Eccentric
More informationFlow Control and Differential Pressure Controller AFPQ / VFQ 2(21) - Installation in return line AFPQ 4 / VFQ 2(21) - Installation in flow line
Flow Control and Differential Pressure Controller AFPQ / VFQ 2(21) - Installation in return line AFPQ 4 / VFQ 2(21) - Installation in flow line Description / Application AFPQ VFQ AFPQ 4 VFQ The controller
More informationDifferential pressure relief controller (PN 16, 25, 40) AFPA / VFG 2(1)
Data sheet Differential pressure relief controller (, 25, 40) AFPA / VFG 2() Description The controller has a control valve, an actuator with one control diaphragm and spring for differential pressure
More informationMaterials : Cast iron or Stainless steel
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 800 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
More informationKNIFE GATE VALVE Product Ref. : KG02W/KG02L
General Description Model KG02 is a bidirectional knife gate valve suitable for most industrial application cases. With one piece body design, it combines robust and economy giving best cost effective
More informationSeries 240 Pneumatic Control Valve Type and Type Globe Valve Type 3241
Series 240 Pneumatic Control Valve Type 3241-1 and Type 3241-7 Globe Valve Type 3241 Application Control valve for process engineering and industrial applications Nominal size DN 15 to 300 Nominal pressure
More informationPneumatic Butterfly Valve Type 3335 / AT
Pneumatic Butterfly Valve Type 3335 / AT Application Tight closing butterfly valve for process engineering and plants with industrial requirements DN 50 to DN 300 2 to 12 Nominal pressure PN 10 and PN
More informationBI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVE KGV-XD SEMI LUGGED WITH RISING STEM & HANDWHEEL KGV-XD SEMI LUGGED WITH D/A PNEUMATIC ACTUATOR KGV-XD FULLY LUGGED WITH BONNET & HADNWHEEL The XD model knife gate is a Bi-directional
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body. Certificate 3.1
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges PN10-10 C for NBR seat ( -15 C for EPDM ) + 90 C for NBR seat ( + 110 C for EPDM ) Max Pressure : 10 Bars
More informationUNI-DIRECTIONAL KNIFE GATE VALVE
UNI-DIRECTIONAL KNIFE GATE VALVE The MU-CYL model knife gate is a Uni-directional valve, equipped with automatic or manual driver, that by its loose elastomeric clamping ring design (tight version) ensures
More informationKNIFE GATE VALVES -- MODEL D
PRODUCT DESCRIPTION Flanged unidirectional knife gate valve for high pressure applications One piece integral cast body with seating wedges and bolted bonnet. High flow rates with low pressure drops. Several
More informationDIAPHRAGM CONTROL VALVE
CONTROL VALVE INTRODUCTION The Diaphragm Valve is essentially a simple pinch clamp, closed by pressing a flexible diaphragm against transverse weir, when fully closed, the diaphragm seats against the weir
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller closes
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description / Application AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller
More informationDiaphragm Valve, Metal
iaphragm Valve, Metal Construction The GEMÜ manually operated 2/2-way metal diaphragm valve has a non-rising handwheel and an integral optical position indicator as standard. Features Suitable for inert
More informationPRZEPUSTNICE. B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3
BUTTERFLY VALVES PRZEPUSTNICE TYPE DESCRIPTION NOMINAL PRESSURE TEMPERATURE DIAMETER STANDARD PAGE B-599 Centric butterfly valve PN16 from -10ºC to +130ºС DN32 DN200 PN-EN 2-3 B-099 Centric butterfly valve
More informationMADE OF STAINLESS... Certificate 3.1
MADE OF STAINLESS... Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 300 Between flanges PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Rising rotating
More informationKNIFE GATE VALVES -- MODEL A
PRODUCT DESCRIPTION Wafer style, uni-directional knife gate valve. One piece integral cast body with guides to support the gate and seating wedges. High flow rates with low pressure drops. Several seat
More informationDifferential pressure controller AFP / VFG 2 (VFG 21)
Differential pressure controller AFP / VFG 2 (VFG 21) Description AFP VFG2 (VFG 21) is a self-acting differential pressure controller primarily for use in district heating systems. The controller closes
More informationMaintenance-free metallic seat shut-off globe valves
Type leaflet 7150.1/5-10 BOA R -H Maintenance-free metallic seat shut-off globe valves with bellows flanged to new European standard 1092-2 type 21 Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16
More informationTechnical Manual. Register 12 CONTENTS - AKH2.2
Page: 1 Contents Register 12 CONTENTS - AKH2.2 Page Technical Data AKH2.2-DIN... 2 Technical Data AKH2.2-ANSI... 3 Material Specification AKH2.2... 4 Dimensions AKH2.2-DIN... 5 Dimensions AKH2.2-ANSI...
More informationOther Information. Section 6. Contained in this section: Actuator Diaphragm Identification. How To Order. Facts and Recommended Guidelines
Section 6 Other Information Contained in this section: How To Order Maintenance Instructions Flange Gasket and Storage Recommendations Actuator Diaphragm Identification Facts and Recommended Guidelines
More informationXV en /5 XV Knife gate valve DN
-80-800-en-04 1/5 The Stafsjö knife gate valve is a compact bi-directional valve with full bore. The valve is specially designed with regard to good flow characteristics and simple maintenance which makes
More informationFull Bore Diaphragm Valve, Metal
Full Bore Diaphragm Valve, Metal Construction The GEMÜ motorized 2/2 way full bore diaphragm valve is fitted with a motor/control units made by AUMA. Features Optional rubber lining particularly suitable
More informationG4 Series. ...Extremely sensitive and accurate PILOT OPERATED PRESSURE REDUCING VALVES PRESSURE EQUIPMENT DIRECTIVE (PED) Adjusting Screw
G4 Series PILOT OPERATED PRESSURE REDUCING VALVES...Extremely sensitive and accurate The G4 pressure reducing valve is designed for use on steam, air and gases. It will maintain a constant outlet pressure
More informationKDV - Kim Diaphragm Valves Weir Type (WT) Weir Type WT. Diaphragm Valves. 1
KDV - Kim Diaphragm Valves Weir Type (WT) Weir Type WT Diaphragm Valves www.kdvflow.com 1 KDV: A Passion for Perfection The KDV Advantage KDV established in Australia in 1979, specialises in the manufacture
More informationExploded view 3 piece ball valves Series R
Exploded view 3 piece ball valves Series R Ball valve of series R with reduced bore (standard version) DN10 to DN65 Example shown: Series R DN65 Please follow assembly and maintenance instructions carefully.
More informationSEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5
SEVERE SERVICE BELLOWS SEALED VALVES EURO CHLOR TYPE 350EC.4-5 PHÖNIX Armaturen-Werke Bregel GmbH P +49 (5693) 988-0 F +49 (5693) 988-140 info@phoenix-armaturen.de www.phoenix-armaturen.de BELLOWS SEALED
More informationKDV - Kim Diaphragm Valves Weir Type (WT) Weir Type WT. Diaphragm Valves. 1
KDV - Kim Diaphragm Valves Weir Type (WT) Weir Type WT Diaphragm Valves 1 KDV: A Passion for Perfection KDV established in Australia in 1979, specialises in the manufacture and distribution of a wide range
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel valve body Compact industrial design with long service life /2702 can be combined
More informationDiaphragm Valve, Metal
Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally
More informationUNIDIRECTIONAL Knife Gate Valve
12/04/2016 UNIDIRECTIONAL Knife Gate Valve Unidirectional knife gate valve. Mechanically welded body. Various seat and packing materials available. Face to face dimension in accordance with standard, it
More informationDiaphragm Valve MV 310
ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation
More informationType 431, 433. Balanced bellows design. Type Cap H2. 18 Adjusting screw with bushing. 19 Lock nut. 16 Upper spring plate. 12 Spindle.
Balanced bellows design 40 Cap H2 18 Adjusting screw with bushing 19 Lock nut 16 Upper spring plate 12 Spindle 9 Bonnet 54 Spring 14 Split ring 17 Lower spring plate 55 Stud 56 Nut 8 Guide with bushing
More informationTechnical Manual. Register 2 CONTENTS - AKH2
Page: 1 Contents Register 2 CONTENTS - AKH2 Page Technical Data AKH2-DIN...2 Technical Data AKH2-ANSI...3 Material Specification AKH2...4 Dimensions AKH2-DIN...5 Dimensions AKH2-ANSI...6 Spare Parts AKH2
More informationFlowCon SH mm. Adjustable Dynamic Self Balancing Valve SPECIFICATIONS
FlowCon SH 50-150mm Adjustable Dynamic Self Balancing Valve SPECIFICATIONS Pressure rating: 4000 kpa / 580 psi Temperature rating, media: -20 C to +120 C / -4 F to +248 F Material: - Diaphragm: Hydrogenated
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a bi-directional wafer valve equipped with two metallic coved rubber sleeves designed for use in the handling of abrasive slurries, mainly in industries
More informationStafsjö Valves AB. SE Stavsjö, Sweden. Tel: +46 (0) Fax: +46 (0) A Bröer Group company
Product: W W Stafsjö s knife gate valve W is a bi-directional valve with full bore. It is made to handle different liquids, especially in water, waste water and biogas plants. The W valve is designed of
More informationMaintenance-free metal-seated globe valves. Grey cast iron PN 16 DN Nodular cast iron PN 16 DN Nodular cast iron PN 25 DN
Type Series Booklet 7150.1/9-10 BOA -H Maintenance-free metal-seated globe valves with bellows Grey cast iron PN 16 DN 15-300 Nodular cast iron PN 16 DN 15-350 Nodular cast iron PN 25 DN 15-150 Applications
More informationHEAVY DUTY KNIFE GATE VALVE
HEAVY DUTY KNIFE GATE VALVE The model knife gate is an uni-directional lug type valve designed according to MSS-SP-81 and TAPPI TIS 405-8 for industrial service applications. The design of the body and
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More information611, 671. Diaphragm Valve, Metal
Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features
More informationDOUBLE-ECCENTRIC BUTTERFLY VALVES TYPE L32.7
Application Double-eccentric butterfly valves are industrial valves, which are designed to fully open or close the passage of the working medium flowing through a pipeline. They can also be used for flow-control
More informationBI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES WITH D/A PNEUMATIC ACTUATOR
BI-DIRECTIONAL KNIFE GATE VALVES XD-PRE SERIES KGV XD-PRE SERIES FULLY LUGGED WITH RISING STEM & HANDWHEEL KGV XD-PRE SERIES FULLY LUGGED WITH D/A PNEUMATIC ACTUATOR KGV XD-PRE SERIES FULLY LUGGED WITH
More informationARI-STEVI 423 / 463 Pneumatic actuator ARI-DP 34-34T. Electric actuator ARI-PREMIO 5-25 kn ARI-PREMIO-Plus 2G 5-25 kn
ARI-STEVI 423 / 463 (DN200-300) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 423 / 463 Pneumatic actuator ARI-DP
More informationTechnical Manual. Register 18 Contents - T4E
Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5
More informationARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring)
With pneumatic and electric actuators ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
More informationNON-RETURN VALVE RT25
NON-RETURN VALVE RT25 DESCRIPTION The RT25 all stainless steel disc check valve has a compact design and was specially designed for use with steam and hot condensate. Connections are female screwed MAIN
More informationARI-STEVI 450 / 451 Pneumatic actuator ARI-DP 32-34T. Electric actuator ARI-PREMIO 2,2-25 kn ARI-PREMIO-Plus 2G 2,2-25 kn
ARI-STEVI 450 / 451 (DN15-150) Control valve - 3-way-form (mixing/diverting valve) (optional with screwed seat ring) With pneumatic and electric actuators ARI-STEVI 450 / 451 Pneumatic actuator ARI-DP
More informationVALVE FEATURES AVAILABLE MODELS LIMITS OF USE IP 67
VALVE FEATURES The resilient seat gate valve type is dedicated to the shut off of clear water and sewage water pipes. The motorization with the REGADA actuator allows the automation and the remote control
More informationCAST IRON VALVES PRESSURE REDUCING VALVES SERIES
CAST IRON VALVES PRESSURE REDUCING VALVES SERIES NETAFIM CAST IRON VALVES PRESSURE REDUCING VALVES INLINE 0-600MM ANGLE 0-150MM SPECIFICATIONS Manufactured to ISO 9001 Available Valve sizes INLINE Flanged
More informationCOMPANY PROFILE TABLE OF CONTENT. Our products have been supplied to local and foreign customers for the following industries:
UTTERFLY VALVES TALE OF CONTENT COMPANY PROFILE The company ARMATURY Group a.s. is a leading Czech manufacturer and distributor of industrial valves, fittings and control systems for valves. The annual
More informationMaterials : Cast iron
Size : Ends : Min Temperature : Max Temperature : DN 15 to DN 200 Flanges ISO PN16-10 C + 300 C Max Pressure : 16 Bars Specifications : Rising rotating stem and handwhell Bolted bonnet and gland packing
More informationVALFONTA PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS
PRESSURE REGULATOR WITHOUT AUXILIARY ENERGY EXCESS PRESSURE VALVE (PRESSURE RELIEF VALVE) MODEL S1 MAIN CHARACTERISTICS The S1 model is self-operated bellows sealed pressure excess valve. This series of
More informationISO RESILIENT WEDGE GATE VALVE. Engineering Creative Solutions for Fluid Systems Since 1901
ISO RESILIENT WEDGE GATE VALVE Engineering Creative Solutions for Fluid Systems Since 1901 TABLE OF CONTENTS ISO RESILIENT WEDGE GATE VALVE Scope of Line...1 Features and Benefits...1 Suggested Specification...2
More informationPressure reduction controller AFD / VFG 2, VFG 21, VFGS 2
Data sheet Pressure reduction controller AFD / VFG 2, VFG 21, VFGS 2 Description The controller is a self-acting pressure reducer primarily for use in district heating systems. The control closes on rising
More informationUNIDIRECTIONAL Round Guillotine Damper
28/02/2012 UNIDIRECTIONAL Round Guillotine Damper Gas valve, with round damper design. Unidirectional guillotine damper. Various seat and packing materials available. Face to face distance in accordance
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron EN GJS body
Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges GN10/16 and ASA150-10 C (with EPDM seat ) + 90 C ( with EPDM seat, temporarily 110 C ) Max Pressure : 16 Bars up to DN200
More informationNORI 320 Globe valves PN DN Application Standard variants Operating data Materials Remarks Design
Type series booklet 7653.1/8-10 NORI 320 Globe valves with gland packing with non-turning stem flanged or butt-weld ends ZXLF ZXSF PN 250-320 DN 65-200 Application In industrial plants, power stations,
More information2/2-way Angle Seat Valve, manually operated, for media up to +180 C
2/2-way Angle Seat Valve, manually operated, for media up to +180 C Position indication Adjustable flow rates Stainless steel 316L valve body Compact industrial design with long service life /2702 can
More informationPressure reduction controller AFD / VFG 2, VFG 21, VFGS 2
Data sheet Pressure reduction controller AFD / VFG 2, VFG 21, VFGS 2 Description The controller is a self-acting pressure reducer primarily for use in district heating systems. The control closes on rising
More informationHYDRAULIC CONTROL VALVES
HYDRAULIC CONTROL VALVES The automatic control valves are diaphragm valves designed to provide hydraulically driven solutions to pressure, flow and level control applications. Features: Main valve uses
More informationSize : Ends : Min Temperature : Max Temperature : Reinforced lug from DN200 to DN1400 MADE OF STAINLESS...
MADE OF STAINLESS... Reinforced lug from DN200 to DN1400 Size : Ends : Min Temperature : Max Temperature : DN 32 to 1400 mm Between flanges PN10/16-10 C ( with EPDM seat ) + 110 C ( with EPDM seat ) Max
More informationButterfly valve with ADA pneumatic actuator
1133-1135 Butterfly valve with ADA pneumatic actuator MAIN CARACTERISTICS The 1133-1135 lug butterfly valves are dedicated to the automatic shut off of standard fluids lines. The construction includes
More informationUNIDIRECTIONAL WAFER Knife Gate Valve
03/01/2011 UNIDIRECTIONAL WAFER Knife Gate Valve Unidirectional wafer design knife gate valve. One piece cast body with guides to support gate and seat wedges. Provides high flow rates with low pressure
More information