OVAL SERIES. Product Overview and Technical information>>

Size: px

Start display at page:

Download "OVAL SERIES. Product Overview and Technical information>>"

August Andrew Wilkerson
5 years ago
Views:

1 OVAL SERIES Product Overview and Technical information>>

2 luminaire > ATR1

environment to center stage. It creates the perfect interaction between people and their surroundings.

3 Some luminaires of this series are IDA (International Dark-Sky Association) approved. ECLW SOL1-LED ATR1 CEL1 ECL1 OVAL SERIES Daring to be different / The Oval is designed to bring the lighted environment to center stage. It creates the perfect interaction between people and their surroundings. Elevate your project to a higher level with the use of this ingenious and refined lighting system that creates an inviting atmosphere wherever it is placed.>>

luminaire > CEL1 INDIVIDUALITY IS NOTICED With perfectly controlled geometry based on a pure and timeless shape, the visionary styling of the Oval Series will make a bold statement now and in the

5 luminaire > CEL1 INDIVIDUALITY IS NOTICED With perfectly controlled geometry based on a pure and timeless shape, the visionary styling of the Oval Series will make a bold statement now and in the future. Your project will greatly benefit from the singular effect of the Oval. It complements and enhances the final result of any project by providing something that is very difficult to find: Individuality that can stand the test of time. INTERACTIVITY IS FELT In addition to the precision of our manufacturing standards, the Oval offers exceptional photometric performance for a luminaire of its size. Superior photometric performance means wider pole spacing, requiring less luminaires in any given area, which in turn brings about energy savings as a natural extension. Reduce the energy consumption of your project. Increase your contribution to the world. >>

6 BENEFITS > > Smartseal technology maximizes photometric performance and energy efficiency. > > Addresses a myriad of environmental concerns in a responsible manner. > > Exceptional durability and long life. > > Available with metal halide (MH), high-pressure sodium (HPS), and compact fluorescent (CF). > > Unitized removable ballast tray with quick disconnect and toolfree access to lamp and electrical components. >>

7 SOLTICE OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No standards 29 5 /8" (752 mm) 15 3 /4" (400 mm) 14" (356 mm) 11 1 /2" (292 mm) 14 1 /8" (359 mm) 11 1 /4" (286 mm) SOL1-LED SOL1 Pole height 20" (508 mm) LC 8" (203 mm) Typical bolt projection 3" (76 mm) 4 3 /4" (121 mm) For height details see pole section Typical bolt projection 3" (76 mm) 5 3 /8" (137 mm) 14 1 /8" (359 mm) SOL /4" (260 mm) 18" (457 mm) 13" (330 mm) SOLM1

8 ANCHOR PLATES 7 1 /2" (191 mm) Bolt circle : 7 1 /2" ø (191 mm) B.C. allowed : 7" - 8" ø ( mm) Anchor bolts : 3/4" ø - 20" (19 mm ø mm) 10 1 /4" (260 mm) Bolt circle : 10 1 /2" ø (267 mm) B.C. allowed : 9 1 /2" /2" ø ( mm) Anchor bolts : 3/4" ø - 20" (19 mm ø mm) SOL1-LED Wind Maximum speed pole height (mph) (ft.) SOL2-LED Wind Maximum speed pole height (mph) (ft.) SOL1 Wind Maximum speed pole height (mph) (ft.) SOL2 Wind Maximum speed pole height (mph) (ft.) SOLM1-LED Wind Maximum speed pole height (mph) (ft.) SOLM2-LED Wind Maximum speed pole height (mph) (ft.) SOLM1 Wind Maximum speed pole height (mph) (ft.) SOLM2 Wind Maximum speed pole height (mph) (ft.) SPECIFICATIONS Luminaire Elliptical shape housing, made from die cast (356) aluminum, mechanically assembled to the arm. Flat lens clear tempered glass mechanically assembled onto the cast aluminum access mechanism frame. Optional Light Column made from satin finish acrylic, with colored LED (light emitting diode). Ballast High power factor of 90%. Lamp starting capacity 20 F ( 30 C) degrees. Assembled on a unitized removable tray with quick disconnect plug. Arm Made of die cast (356) aluminum, mechanically assembled to the pole. SOL1 / SOL2 Pole Shaft Made from 5" (127 mm) wide by 3 1/2" (89 mm) deep, elliptical, extruded (6061-T6) aluminum tubing, with a 0.250" (6.4 mm) wall thickness, welded to both the bottom and top of the anchor plate. SOLM1 / SOLM2 Pole Shaf Made from two elliptical extruded (6061 T6) aluminum tubing, with a 0.250" (6.4 mm) wall thickness, an upper part of 5" (127 mm) wide by 3 1/2" (89 mm) deep and a lower part of 7" (178 mm) wide by 5" (127 mm) deep welded to both the bottom and top of the anchor plate. Maintenance Opening A 2" * 4 1/2" (51 * 114 mm) maintenance opening is centered 20" (508 mm) from the bottom of the anchor plate, complete with a weatherproof aluminum cover and a factory-assembled, copper ground lug. Base Cover Oval shaped, two-piece, cast (356) aluminum base cover, mechanically fastened with stainless steel screws. Finish "Hot dip" chemical etching preparation. Lumital polyester powder coat finish. Excellent color retention as per #ASTM D2244, and outstanding salt-spray resistance according to #ASTM D2247 testing procedures. Note EPA recommendations are calculated according to AASHTO standards and include a 30% gust factor.

9 ORDERING INFORMATION PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION SOL1 / 2 SOL1 / 2 POLE HEIGHT 3 POLE OPTIONS finish 1 SOL1 SOL2 SOLM1 SOLM2 50 MH 70 MH 100 MH 150 MH 35 HPS 50 HPS 70 HPS 100 HPS 150 HPS 18 FC 26 FC 32 FC 42 FC 2H 4H 4H LEDA (amber) 4 LEDB (blue) 4 LEDG (green) 4 LEDR (red) 4 LEDW (white) SLG (glass sag lens) PH (photocell) BE2/TX BE6/TX BE8/TX BG2/TX BK/TX BR/TX GN/TX GN4/TX GN6/TX GN8/TX GY3/TX RD2/TX 60 CW 90 CW 2H 4H RD4/TX WH/TX NP TG TS Consult Philips Lumec s color chart. Not available with LED option. Refer to luminaire maximum height chart. See LED visual effects towards the end of document. > Medium base socket / ED17 lamp for HID (lamp not included). > Socket: GX24Q-2 (18W), GX24Q-3 (26W)(32W), GX24Q-4 (42W), triple tube for compact fluorescent (lamp not included). ORDERING SAMPLE PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION POLE HEIGHT POLE OPTIONS finish SOL1 32 CF 4H 208 LEDB 9.5 NP >>

10 assembly examples SOL1-LED SOL2-LED SOL1 SOL2 SOLM1-LED SOLM2-LED SOLM1 SOLM2 >>

ATRIA OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No. 250.

11 ATRIA OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No standards 16 3 /4" (423 mm) 28 1 /4" (718 mm) LC 18 3 /4" (476 mm) 9 3 /8" (238 mm) 18" (457 mm) 18" (457 mm) 9 3/8" (238 mm) 14 1/8" (359 mm) 11 1/4" (286 mm) ATRY ATR1 Pole height 20" (508 mm) LC 8 7 /8" (225 mm) Typical bolt projection 3" (76 mm) 5" (127 mm) For height details see pole section Typical bolt projection 3" (76 mm) 5 3 /8" (137 mm) 14 1 /8" (359 mm) 11 1 /4" (260 mm) 18" (457 mm) 13" (330 mm) ATR1 ATRM1

12 ANCHOR PLATES 7 1 /2" (191 mm) Bolt circle : 7 1 /2" ø (191 mm) B.C. allowed : 7" - 8" ø ( mm) Anchor bolts : 3/4" ø - 20" (19 mm ø mm) 10 1 /4" (260 mm) Bolt circle : 10 1 /2" ø (267 mm) B.C. allowed : 9 1 /2" /2" ø ( mm) Anchor bolts : 3/4" ø - 20" (19 mm ø mm) ATR1 Wind Maximum speed pole height (mph) (ft.) ATR2 Wind Maximum speed pole height (mph) (ft.) ATRY Wind Maximum speed pole height (mph) (ft.) ATRM1 Wind Maximum speed pole height (mph) (ft.) ATRM2 Wind Maximum speed pole height (mph) (ft.) ATRYM Wind Maximum speed pole height (mph) (ft.) SPECIFICATIONS Luminaire Elliptical shape housing, made from die cast (356) aluminum, mechanically assembled to the arm. Flat lens clear tempered glass mechanically assembled onto the cast aluminum access mechanism frame. Optional colored LED (light emitting diode) ring. Ballast High power factor of 90%. Lamp starting capacity 20 F( 30 C) degrees. Assembled on a unitized removable tray with quick disconnect plug. Arm or Yoke Made of die cast (356) aluminum, mechanically assembled to the pole. ATR1 / ATR2 Pole Shaft Made from 5" (127 mm) wide by 3 1/2" (89 mm) deep, elliptical, extruded 6061-T6 aluminum tubing, with a 0.250" (6.4 mm) wall thickness, welded to both the bottom and top of the anchor plate. ATRM1 / ATRM2 Pole Shaft Made from two elliptical extruded (6061 T6) aluminum tubing, with a 0.250" (6.4 mm) wall thickness, an upper part of 5" (127 mm) wide by 3 1/2" (89 mm) deep and a lower part of 7" (178 mm) wide by 5" (127 mm) deep welded to both the bottom and top of the anchor plate. Maintenance Opening A 2" * 4 1/2" (51 * 114 mm) maintenance opening centered 20" (508 mm) from the bottom of the anchor plate, complete with a weatherproof aluminum cover and a factory-assembled, copper ground lug. Base Cover Oval shaped, two-piece, cast (356) aluminum base cover, mechanically fastened with stainless steel screws. Finish "Hot dip" chemical etching preparation. Lumital polyester powder coat finish. Excellent color retention as per #ASTM D2244, and outstanding salt-spray resistance according to #ASTM D2247 testing procedures. Note EPA recommendations are calculated according to AASHTO standards and include a 30% gust factor.

13 ORDERING INFORMATION PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION ATR1 / 2 / Y ATRM1 / 2 / Y POLE HEIGHT 3 POLE OPTIONS finish 1 ATR1 ATR2 ATRY ATRM1 ATRM2 ATRMY 50 MH 70 MH 100 MH 150 MH 2 35 HPS 50 HPS 70 HPS 100 HPS 2H 4H LEDA (amber) 4 LEDB (blue) 4 LEDG (green) 4 LEDR (red) 4 LEDW (white) PH (photocell) BE2/TX BE6/TX BE8/TX BG2/TX BK/TX BR/TX GN/TX 150 HPS 2 18 FC 26 FC 32 FC 42 FC 4H SLG (glass sag lens) GN4/TX GN6/TX GN8/TX GY3/TX RD2/TX 60 CW 90 CW 2H 4H RD4/TX WH/TX NP TG TS Consult Philips Lumec s color chart. Not available with LED ring option. Refer to luminaire maximum height chart. See LED visual effects towards the end of document. > Medium base socket / ED17 lamp for HID (lamp not included). > Socket: GX24Q-2 (18W), GX24Q-3 (26W)(32W), GX24Q-4 (42W), triple tube for compact fluorescent (lamp not included). ORDERING SAMPLE PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION POLE HEIGHT POLE OPTIONS finish ATR1 100 MH 2H PH NP >>

14 assembly examples ATR1 ATR2 ATR2 ATRM1 ATRM2 ATRM2 >>

15 CELESTIA OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No standards 18" (457 mm) 14 1 /8" (359 mm) CEL1 20" (508 mm) 3" (76 mm) Pole height 5" (127 mm) LC 6 3 /4" (171 mm) 9 3 /8" (238 mm) 11 1 /4" (286 mm) Typical bolt projection 16 1 /2" (419 mm) 12 3 /4" (324 mm) CEL1

16 ANCHOR PLATES 12 3 /4" (324 mm) Bolt circle 9" ø (229 mm) Anchor bolts 3/4" ø - 2" (19 mm ø mm) CEL1 Wind Maximum speed pole height (mph) (ft.) SPECIFICATIONS Luminaire Elliptical shape housing, made from die cast (356) aluminum, mechanically assembled to the arm. Flat lens clear tempered glass mechanically assembled onto the cast aluminum access mechanism frame. Optional colored LED (light emitting diode) ring. Ballast High power factor of 90%. Lamp starting capacity 20 F( 30 C) degrees. Assembled on a unitized removable tray with quick disconnect plug. Arm Made of die cast (356) aluminum, mechanically assembled to the pole. Pole Shaft Made from 3" (76 mm) dia. to 6" (152 mm) dia., round, tapered, spun (6063-T6) aluminum, with a 0.120" (3.0 mm) wall thickness at a five-degree angle, welded to both the bottom and top of the anchor plate. Maintenance Opening A 3 3/4" * 6 1/2" (121 * 165 mm) maintenance opening is centered 20" (508 mm) from the bottom of the anchor plate, complete with a weatherproof aluminum cover and a factory-assembled, copper ground lug. Base Cover Oval shaped, one-piece, cast (356) aluminum base cover, mechanically fastened with stainless steel screws. Finish "Hot dip" chemical etching preparation. Lumital polyester powder coat finish. Excellent color retention as per #ASTM D2244, and outstanding salt-spray resistance according to #ASTM D2247 testing procedures. Note EPA recommendations are calculated according to AASHTO standards and include a 30% gust factor.

17 ORDERING INFORMATION PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION POLE HEIGHT 3 POLE OPTIONS finish 1 CEL1 50 MH 70 MH 100 MH 150 MH 2 35 HPS 50 HPS 70 HPS 100 HPS 2H 4H LEDA (amber) 4 LEDB (blue) 4 LEDG (green) 4 LEDR (red) 4 LEDW (white) PH (photocell) BE2/TX BE6/TX BE8/TX BG2/TX BK/TX BR/TX GN/TX 150 HPS 2 18 FC 26 FC 32 FC 42 FC 4H SLG (glass sag lens) GN4/TX GN6/TX GN8/TX GY3/TX RD2/TX 60 CW 90 CW 2H 4H RD4/TX WH/TX NP TG TS Consult Philips Lumec s color chart. Not available with LED ring option. Refer to luminaire maximum height chart. See LED visual effects towards the end of document. > Medium base socket / ED17 lamp for HID (lamp not included). > Socket: GX24Q-2 (18W), GX24Q-3 (26W)(32W), GX24Q-4 (42W), triple tube for compact fluorescent (lamp not included). ORDERING SAMPLE PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION POLE HEIGHT POLE OPTIONS finish CEL1 150 HPS 4H NP >>

18 assembly examples CEL1 CEL1 >>

ECLIPSE OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No. 250.

19 ECLIPSE OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No standards 14" (356 mm) 9 3/8" (238 mm) 14 1/8" (359 mm) 11 1/4" (286 mm) 9 3 /8" (238 mm) 14 1 /8" (359 mm) LC 13 1 /2" (343 mm) 22 7 /8" (581 mm) ECL1 / ECL51/ ECL61 ECLY Pole height 20" (508 mm) LC 6 1 /2" (165 mm) Typical bolt projection 3" (76 mm) 8" (203 mm) For height details see pole section 3" (76 mm) Typical bolt projection 10" (254 mm) 9 1 /2" (241 mm) ECL1 12" (305 mm) ECL1M

20 ANCHOR PLATES 6 5 /8" (168 mm) Bolt circle : 6" ø (152 mm) Range of B.C. : 5 1 /2" /8" ø ( mm) Anchor bolts : 3/4" ø - 20" (19 mm ø mm) 9 5 /8" (245 mm) Bolt circle : 8 1 /2" ø (216 mm) Range of B.C. : 7 3 /4" - 9" ø ( mm Anchor bolts : 3/4" ø - 20" (19 mm ø mm) ECL1 Aluminum steel (s) Wind Maximum Maximum speed pole height pole height (mph) (ft.) (ft.) ECLM1 Aluminum steel (s) Wind Maximum Maximum speed pole height pole height (mph) (ft.) (ft.) ECL2 Aluminum steel (s) Wind Maximum Maximum speed pole height pole height (mph) (ft.) (ft.) ECLM2 Aluminum steel (s) Wind Maximum Maximum speed pole height pole height (mph) (ft.) (ft.) ECLY Aluminum steel (s) Wind Maximum Maximum speed pole height pole height (mph) (ft.) (ft.) ECLMY Aluminum steel (s) Wind Maximum Maximum speed pole height pole height (mph) (ft.) (ft.) SPECIFICATIONS Luminaire Elliptical shape housing, made from die cast (356) aluminum, mechanically assembled to the arm. Flat lens clear tempered glass mechanically assembled onto the cast aluminum access mechanism frame. Optional colored LED (light emitting diode) ring. Ballast High power factor of 90%. Lamp starting capacity 20 F( 30 C) degrees. Assembled on a unitized removable tray with quick disconnect plug. Arm or Yoke Made of die cast (356) aluminum, mechanically assembled to the pole. ECL1/ECL2/ECLY Pole Shaft Made from 3" (76 mm) round, extruded (6061-T6) aluminum tubing, having a 0.250" (6.4 mm) wall thickness (or high-tensile carbon steel tubing), welded to both the bottom and top of the anchor plate. ECLM1/ECLM2/ECLMY Pole Shaft Aluminum version : Made from two round extruded (6061 T6) aluminum tubing. An upper part of 3" (76 mm) with a 0.250" (6.4 mm) wall thickness and a lower part of 5" (127 mm) with 0.219" (5.6 mm) wall thickness welded to both the bottom and top of the anchor plate. Steel version : Made from two round extruded high-resistance steel carbon tubing. An upper part of 3" (76 mm) with a 0.250" (6.4 mm) wall thickness and a lower part of 5" (127 mm) with 0.150" (3.8 mm) wall thickness welded to both the bottom and top of the anchor plate. Maintenance Opening A 2" * 4 1/2" (51 * 114 mm) maintenance opening is centered 20" (508 mm) from the bottom of the anchor plate, complete with a weatherproof aluminum cover and a factory-assembled, copper ground lug. Base Cover Two-piece, round base cover made from cast (356) aluminum, mechanically fastened with stainless steel screws. Finish "Hot dip" chemical etching preparation. Lumital polyester powder coat finish. Excellent color retention as per #ASTM D2244, and outstanding salt-spray resistance according to #ASTM D2247 testing procedures. Note EPA recommendations are calculated according to AASHTO standards and include a 30% gust factor.

21 ORDERING INFORMATION PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION ECL1 / 2 / Y ECLM1 / 2 / Y POLE HEIGHT 3 POLE OPTIONS finish 1 ECL1 ECL2 ECLY ECLM1 ECLM2 ECLMY 50 MH 70 MH 100 MH 150 MH 2 35 HPS 50 HPS 70 HPS 100 HPS 2H 4H LEDA (amber) 4 LEDB (blue) 4 LEDG (green) 4 LEDR (red) 4 LEDW (white) PH (photocell) S (steel) BE2/TX BE6/TX BE8/TX BG2/TX BK/TX BR/TX GN/TX 150 HPS 2 18 FC 26 FC 32 FC 42 FC 4H SLG (glass sag lens) GN4/TX GN6/TX GN8/TX GY3/TX RD2/TX 60 CW 90 CW 2H 4H RD4/TX WH/TX NP TG TS Consult Philips Lumec s color chart. Not available with LED ring option. Refer to luminaire maximum height chart. See LED visual effects towards the end of document. > Medium base socket / ED17 lamp for HID (lamp not included). > Socket: GX24Q-2 (18W), GX24Q-3 (26W)(32W), GX24Q-4 (42W), triple tube for compact fluorescent (lamp not included). ORDERING SAMPLE PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION POLE HEIGHT POLE OPTIONS finish ECL1 70 MH 4H 240 SLG 12 NP >>

22 assembly examples ECL1 ECL2 ECLY ECLM1 ECLM2 ECLMY >>

23 POLES OVAL SERIES CEL CEL SOL / ATR SOLM / ATRM SOL ATR 24 (7.32 m) 24 ( (7.32 m) m) 22 (6.71 m) 22 ( (6.71 m) m) 20 ( m) ( (6.10 m) m) 18 ( m) ( (5.49 m) m) 16 ( m) ( (4.88 m) m) 14 (4.27 m) 14 ( (4.27 m) m) 12 ( m) ( (3.66 m) m) 10 ( m) ( (3.05 m) m) 8 (2.44 m) 8 ( (2.44 m) m) 6 (1.83 m) 6 ( (1.83 m) m) 4 (1.22 m) 4 ( (1.22 m) m) 2 (0.61 m) 2 ( (0.61 m) m) ft (m) ft (m) ft (m) 8' to 22' 8' to 18.5' 8' to 22' 24 (7.32 m) 24 ( (7.32 m) 24 m) (7.32 m) 22 (6.71 m) 22 ( (6.71 m) ECL 22 m) (6.71 m) ECL-ALUMINUM ECL-STEEL ECLM-ALUMINUM / STEEL (6.10 ( m) ( (6.10 m) 20 m) (6.10 m) (5.49 ( m) ( (5.49 m) 18 m) (5.49 m) (4.88 ( m) ( (4.88 m) 16 m) (4.88 m) (5.49 (4.27 m) 14 ( (4.27 m) 14 m) (4.27 m) (4.88 ( m) ( (3.66 m) 12 m) (3.66 m) (3.05 ( m) ( (3.05 m) 10 m) (3.05 m) 12 8 (3.66 (2.44 m) 8 ( (2.44 m) 8 m) (2.44 m) 10 6 (3.05 (1.83 m) 6 ( (1.83 m) m) 6 (1.83 m) 8 4 (2.44 (1.22 m) 4 ( (1.22 m) m) 4 (1.22 m) 6 2 (0.61 (1.83 m) 2 ( (0.61 m) m) 2 (0.61 m) 4 (1.22 ft (m) ft (m) ft (m) ft (m) 2 (0.61 m) ft (m) >>

24 BOLLARD/OVB OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No standards 5" (127 mm) 3 1 /2" (89 mm) 40 3 /8" (1025 mm) 5 3 /4" (144 mm) Bolt projection 1 1 /4" (32 mm) 8 3 /4" (223 mm) 7 1 /4" (185 mm) 4 1 /2" (114 mm) 7 1 /4" (185 mm) Bolt circle 5" (126 mm) Anchor bolts 3/8" ø - 12" (10 mm ø mm) OVB_surface mounting OVB_underground mounting SPECIFICATIONS Hood Die cast (356) aluminum cover. Body Made from a 5" (127 mm) wide by 3 1/2" (89 mm) deep, elliptical, extruded (6061-T6) aluminum tubing, having a 0.250" (6.4 mm) wall thickness, mechanically assembled to the anchor plate at the bottom of the bollard with 4 steel anchor bolts. Two mounting possible Surface mounting : A base cover hides the anchor plate and the bolts. Underground mounting : The anchor plate and the bolts are located 4 1/2 (114 mm) below apparent ground level. Lens Clear acrylic, elliptical lens, satin finish and internal flute. 6LEDA/6LEDB/6LEDG/6LEDR/6LEDW Lamp 6-watt light-emitting diodes (LEDs). Driver High power factor of 90%. Electronic driver, operating range khz. Lamp starting capacity of -40 F (-40 C). Assembled on a tray with quick disconnect plug. Access Mechanism Four screws integrated to the base of the body offer access to the inside of the luminaire and to the lamp. Base cover Oval shaped, one piece cast (356) aluminum base cover mechanically fastened with two stainless steel screws. Finish "Hot dip" chemical etching preparation. Lumital polyester powder coat finish. Excellent color retention as per #ASTM D2244, and outstanding salt-spray resistance according to #ASTM D2247 testing procedures.

25 ORDERING INFORMATION PRODUCT Lamp VOLTAGE LUMINAIRE OPTIONS finish 1 OVB 6LEDB (blue) 2 6LEDE (red) 2 6LEDW (white) PH (photocell) VPA (Vandalproof hardware) BE2/TX BE6/TX BE8/TX GN8/TX GY3/TX RD2/TX BG2/TX RD4/TX BK/TX WH/TX BR/TX NP GN/TX TG GN4/TX TS GN6/TX 1 2 Consult Philips Lumec s color chart. See LED visual effects towards the end of document. ORDERING SAMPLE PRODUCT Lamp VOLTAGE LUMINAIRE OPTION finish OVB 6LEDB 120 VPA NP >>

26 WALL SCONCE / ECLW OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No standards 14 3 /4" (375 mm) MOUNTING DETAILS > ECLW wall sconce mounted by 4 anchor bolts 5 /16 ø (8 mm) to a 4" (102 mm) square or 2" * 3" (51 * 76 mm) junction box. > Structural members must be present in wall to accept bolts. 7 3 /4" (197 mm) 7 7 /8" (200 mm) 11 1 /4" (286 mm) Mounting plate 9 3 /8" (238 mm) MOUNTING BOLT PATTERN 4 5 /16" (110 mm) Bolt projection ECLW 7/8" (22 mm) 3" (76 mm) >>

27 ORDERING INFORMATION PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION finish 1 ECLW 50 MH 70 MH 100 MH 150 MH 2 35 HPS 50 HPS 70 HPS 100 HPS 2H 4H 2HU (with narrow beam uplight) 2, 3 4HU (with narrow beam uplight) 2, 3 2HUW (with narrow beam uplight) 2, 3 4HUW (with narrow beam uplight) 2, LEDA (amber) 4 LEDA (blue) 4 LEDA (green) 4 LEDA (red) 4 LEDA (white) BE2/TX BE6/TX BE8/TX BG2/TX BK/TX BR/TX GN/TX 150 HPS 2 PH (photocell) GN4/TX SLG (glass sag lens) GN6/TX GN8/TX 18 CF 26 CF 32 CF 42 CF 4H GY3/TX RD2/TX RD4/TX WH/TX NP TG TS Consult Philips Lumec s color chart. Not available with LED ring option. See beam effect towards the end of document. See LED visual effects towards the end of document. > Medium base socket / ED17 lamp for HID (lamp not included). > Socket: GX24Q-2 (18W), GX24Q-3 (26W)(32W), GX24Q-4 (42W), triple tube for compact fluorescent (lamp not included). ORDERING SAMPLE PRODUCT Lamp Reflector VOLTAGE LUMINAIRE OPTION finish ECLW 100 MH 2HU 120 PH-SLG NP >>

28 LIGHT COLUMN/OV1 OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No standards 5" (127 mm) 3 1 /2" (89 mm) 20" (508 mm) Light column height 3" (76 mm) 5 3 /8" (137 mm) 24" (610 mm) Typical bolt projection 14 1 /8" (359 mm) 10 1 /4" (260 mm) OV1 ANCHOR PLATES 7 1 /2" (191 mm) Bolt circle : 7 1 /2" ø (191 mm) B.C. allowed : 7" - 8" ø ( mm) Anchor bolts : 3/4" ø - 20" (19 mm ø mm)

29 SPECIFICATIONS Luminaire Housing made from an elliptical die cast (356) aluminum frame of 5" (127 mm) wide by 3 1/2" (89 mm) deep having a 0.188" (4.7 mm) wall thickness. The housing is mechanically assembled to the pole. Clear acrylic, elliptical lens with a satin finish, fluted internally. Mechanically assembled to the housing. Ballast High power factor of 90%. Electronic driver, operating range: khz. Lamp starting capacity of -40 F (-40 C). Assembled on a tray with quick disconnect plug. Pole Shaft Made from 5" (127 mm) wide by 3 1/2" (89 mm) deep, elliptical, extruded (6061-T6) aluminum tubing, having a 0.250" (6.4 mm) wall thickness, welded to both the bottom and top of the anchor plate. Base cover Oval shaped, two piece cast (356) aluminum base cover mechanically fastened with stainless steel screws. Finish "Hot dip" chemical etching prepa ration. Lumital polyester powder coat finish. Excellent color retention as per #ASTM D2244, and outstanding salt-spray resistance according to #ASTM D2247 testing procedures. Note EPA recommendations are calculated according to AASHTO standards and include a 30% gust factor. ORDERING INFORMATION PRODUCT Lamp VOLTAGE LIGHT COLUMN HEIGHT (ft.) LUMINAIRE OPTIONS finish 1 OV1 6LEDB (blue) 6LEDE (red) 6LEDW (white) PH (photocell) BE2/TX BE6/TX BE8/TX BG2/TX BK/TX BR/TX GN/TX GN4/TX GN6/TX GN8/TX GY3/TX RD2/TX RD4/TX WH/TX NP TG TS 1 2 Consult Philips Lumec s color chart. Without access door. ORDERING SAMPLE PRODUCT Lamp VOLTAGE LIGHT COLUMN HEIGHT (ft.) LUMINAIRE OPTIONS finish OV1 6LEDB PH NP

30 assembly examples OV1 >>

31 LIGHT COLUMN/OV2 OVAL SERIES LUMINAIRES Conform to the UL 1598 and CSA C22.2 No standards 7" (178 mm) 5" (127 mm) Lighting section Light column height Typical bolt projection 20" (508 mm) 3" (76 mm) 5 3 /8" (137 mm) 18" (457 mm) 13" (330 mm) OV2 ANCHOR PLATES 10 1 /4" (260 mm) Bolt circle : 10 1 /2" ø (267 mm) B.C. allowed : 9 1 /2" /2" ø ( mm) Anchor bolts : 3/4" ø - 20" (19 mm ø mm)

32 SPECIFICATIONS Luminaire Housing made from an elliptical die cast (356) aluminum frame of 7" (178 mm) wide by 5" (127 mm) deep having a 0.188" (4.7 mm) wall thickness with an extruded aluminum guard. The housing is mechanically assembled to the pole. The housing has a 4 1/2" x 6" (114 x 152 mm) maintenance opening, complete with a weatherproof aluminum cover. Clear acrylic, elliptical lens with a satin finish and internal flute. Mechanically assembled to the housing. Ballast High power factor of 90%. Lamp starting capacity of -20 F (-30 C). Assembled on a unitized removable tray with quick disconnect plug. Pole Shaft Made from 7" (178 mm) wide by 5" (127 mm) deep, elliptical, extruded (6061-T6) aluminum tubing, having a 0.250" (6.4 mm) wall thickness, welded to both the bottom and top of the anchor plate. Base cover Oval shaped, two piece cast (356) aluminum base cover mechanically fastened with stainless steel screws. Finish "Hot dip" chemical etching prepa ration. Lumital polyester powder coat finish. Excellent color retention as per #ASTM D2244, and outstanding salt-spray resistance according to #ASTM D2247 testing procedures. Note EPA recommendations are calculated according to AASHTO standards and include a 30% gust factor. ORDERING INFORMATION PRODUCT Lamp VOLTAGE LIGHT SECTION (ft.) LIGHT COLUMN HEIGHT (ft.) 6 LUMINAIRE OPTIONS finish 1 OV2 70 MH LH3 LH4 4.5 LH5 LH PH (photocell) BE2/TX BE6/TX BE8/TX BG2/TX BK/TX BR/TX GN/TX GN4/TX GN6/TX GN8/TX GY3/TX RD2/TX RD4/TX WH/TX NP TG TS Consult Philips Lumec s color chart. Lamp 70 watts PAR30 spot beam version (not included). Only available with luminous section LH Only available with luminous section LH3 or LH4. Only available with luminous section LH3, LH4 or LH5. Lower maintenance opening not included in heights below 8.5 feet. ORDERING SAMPLE PRODUCT Lamp VOLTAGE LIGHT SECTION (ft.) LIGHT COLUMN HEIGHT (ft.) LUMINAIRE OPTIONS OV2 70 MH LH4 14 PH NP finish

33 assembly examples OV2 >>

34 PHOTOMETRY High-Intensity Discharge Sources CEL ECL SOL ECLW 2H Type II Asymmetrical distribution spreads light forward and on both sides. Recommended applications > Pedestrian walkway/bicycle path > Building entryway > Narrow roadway > Interior and exterior pedestrian malls 4H Type IV Asymmetrical distribution spreads light forward. Recommended applications > Parking lot > Interior and exterior pedestrian malls > Building perimeter (security) > Roadway Compact Fluorescent ATR CEL ECL SOL ECLW 4H Type III Asymmetrical distribution spreads light forward. Recommended applications > Interior and exterior pedestrian malls > Building entryway > Entry hall and drop-off area

ViSUAL EFFECTS ECLW 2H & 4H > Provides only

Provides narrow-spread, upward lighting (15%

& 4HUW > Provides wide, uniform-spread, upward

downward Recommended mounting height: 8 to 15

35 ViSUAL EFFECTS ECLW 2H & 4H > Provides only wide-spread, downward lighting 2HU & 4HU > Provides narrow-spread, upward lighting (15% total uplight), and wide-spread, downward 2HUW & 4HUW > Provides wide, uniform-spread, upward lighting (25% total uplight), and wide-spread, downward Recommended mounting height: 8 to 15 ft. (2.43 to 4.5 m) ATR CEL ECL LEDR LEDG LEDB LEDA

36 luminaire > SOL2-LED

37 PHILIPS LUMEC HEAD OFFICE 640, Curé-Boivin Boulevard Boisbriand, Québec Canada J7G 2A7 T : F : ONTARIO OFFICE 189 Bullock Drive Markham, Ontario Canada L3P 1W4 T : F : For the details of our different agents and representatives, please consult the Contact us section of our Website Philips Group. All rights reserved. We reserve the right to change details of design, materials and finishes. / Some luminaires use fluorescent or high intensity discharge (HID) lamps that contain small amounts of mercury. Such lamps are labeled Contains Mercury and/or with the symbol Hg. Lamps that contain mercury must be disposed of in accordance with local requirements. Information regarding lamp recycling and disposal can be found at >> The choice to not print paper brochures anymore but to make them available on-line is an example of the positive environmental actions that Philips Lumec has decided to undertake. This not only considerably reduces our paper consumption but also guarantees the exactitude of the information our clients receive.

CALLISTO SERIES. Product Overview and Technical information>>

CALLISTO SERIES. Product Overview and Technical information>> CALLISTO SERIES Product Overview and Technical information>> luminaire > CAL2 CALM CAL CAL1 CAL2 CALLISTO SERIES Helping shape a new era / Inspired by classical and contemporary elements, the Callisto