Fasteners Inc. innovative fastener solutions BLIND RIVET NUT CATALOG. "Quality The First Time"
|
|
- Godwin Leonard Norris
- 5 years ago
- Views:
Transcription
1 Fasteners Inc. innovative fastener solutions BIND RIVET NUT CATAOG "Quality The First Time"
2 GOEBE FASTERNERS INC. GOEBE FASTENERS INC. is a subsidiary of GOEBE GmbH, which has been the leading corporation in Europe for specialty fastener technology since We founded our U.S. headquarters in 2016, located in Houston, TX with one goal in mind. To provide unparalleled high quality products and first class service to each and every customer. Our products demonstrate innovation that not only exceeds the norm, but enhances quality, reduces maintenance, and increases application efficiency. GOEBE ocations Worldwide UNITED STATES OF AMERICA GOEBE FASTENERS INC GUHN ROAD, SUITE 110 HOUSTON, TX TE.: +1- (713) E-MAI: SAES@GOEBEFASTENERS.COM WEB: GERMANY GOEBE GMBH SCHRAUB- UND VERBINDUNGSTECHNIK MÜHENSTRASSE 2-4 D ERKRATH TE.: +49 -(0) FAX: +49- (0) E-MAI: DE@GOEBE-GROUP.COM WEB: FRANCE SOCIÉTÉ GOEBE VIS ET TECHNIQUES DE FIXATION E DÔME, 1 RUE DE A HAYE, BP F ROISSY CDG CEDEX TE.: +33- (0) FAX: +33- (0) E-MAI: FR@GOEBE-GROUP.COM WEB: NETHERANDS GOEBE BV SCHROEF- EN VERBINDINGSTECHNIEK ARESSTRAAT 13-02/04 N-5048 CD TIBURG TE.: +31- (0) FAX: +31- (0) E-MAI: N@GOEBE-GROUP.COM WEB: POAND GOEBE POSKA SP.Z.O.O. U.TOPOOWA 1 P KANIE TE.: +48- (0) E-MAI: P@GOEBE-GROUP.COM WEB: ATIN AMERICA GOEBE FASTENERS S DE R DE CV OPE DE VEGA 209 CO. POANCO DE. MIGUE HIDAGO C.P CIUDAD DE MÉXICO TE.: E-MAI: VENTAS@GOEBEFASTENERS.MX WEB: imited Warranty Goebel Fasteners, Inc. ( Seller ). Seller warrants that products sold hereunder conform to industry standards specified herein and will be free from defects in materials and workmanship. THIS WARRANTY IS EXPRESSY GIVEN IN IEU OF ANY AND A OTHER EXPRESS OR IMPIED WARRANTIES, INCUDING ANY IMPIED WARRANTY OF MERCHANTABIITY OR FITNESS FOR A PARTICUAR PURPOSE, AND IN IEU OF ANY OTHER OBIGATION ON THE PART OR THE SEER. Seller will, at its option, repair or replace free of charge (excluding all shipping and handling costs) any products which have not been subject to misuse, abuse or modification and which in its sole determination were not manufactured in compliance with the warranty given above. It is expressly understood that any technical advice furnished by or on behalf of Seller with respect to the use of its goods or services is given without charge, and Seller assumes no obligations or liability for the advice given or results obtained. All such results being given and accepted is at Buyer s Risk. THE REMEDY PROVIDED FOR HEREIN SHA BE THE EXCUSIVE REMEDY FOR ANY BREACH OF WARRANTY OR ANY CAIM ARISING IN ANY WAY OUT OF THE MANUFACTURE, SAE, OR USE OF THESE PRODUCTS. In no event shall Seller be liable for consequential, incidental or any other damages of any nature whatsoever except those specifically provided herein for any breach of warranty or any claim arising in any way out of the manufacture, sale, or use of these products. No other person is authorized by Seller to give any other warranty, written or oral, pertaining to the products. 2
3 TABE OF CONTENTS RANGE OVERVIEW TECHNICA EXPANATION RANGE OVERVIEW 4-5 TRADE NAME CROSS REFERENCE TABE 6 PART NUMBERING SYSTEM 7 TECHNICA TERMS OF THE BIND RIVET NUT 8 THE SETTING PROCESS 9 MATERIA COMBINATIONS - OVERVIEW WHICH BIND RIVET NUT INTO WHICH SHEET 10 K-SERIES AUMINUM 11 YEOW ZINC PATED 12 ZINC PATED 13 STAINESS STEE 14 SK-SERIES AUMINUM 15 YEOW ZINC PATED 16 ZINC PATED 17 STAINESS STEE 18 H-SERIES AUMINUM 19 YEOW ZINC PATED 20 ZINC PATED 21 STAINESS STEE 22 B-SERIES YEOW ZINC PATED 23 TS-SERIES YEOW ZINC PATED 24 GS-Series AUMINUM 25 ZINC PATED 26 STAINESS STEE 27 SS-Series ZINC PATED 28 FS-Series AUMINUMSeries ZINC PATED ZINC PATED SETTING TOOS TOO SEECTION GUIDE
4 RANGE OVERVIEW PRODUCT SERIES MATERIA FINISH THREAD GRIP RANGE TYPE Call Out Series Grade Specification Thread Size Grip Range Type K GO-NUT arge Flange Knurled Body Aluminium 5056 Clear Passivation 6-32 UNC Steel 1008 Zinc Plated 6-8µ 8-32 UNC Stainless Steel AISI 302 Yellow Zinc Plated 6-8µ UNC UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC 1/2-13 UNC Open End SK GO-NUT Small Flange Knurled Body Aluminium 5056 Clear Passivation 6-32 UNC Steel 1008 Zinc Plated 6-8µ 8-32 UNC Stainless Steel AISI 302 Yellow Zinc Plated 6-8µ UNC UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC Open End H GO-NUT arge Flange Semi Hex Body Aluminium 5056 Clear Passivation 6-32 UNC Steel 1008 Zinc Plated 6-8µ 8-32 UNC Stainless Steel AISI 302 Yellow Zinc Plated 6-8µ UNC UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC 1/2-13 UNC Open End B GO-SPIT arge Flange Prebulbed Slotted Body Steel 1008 Zinc Plated 6-8µ 1/4-20 UNC Open End Yellow Zinc Plated 6-8µ 5/16-18 UNC /8-16 UNC
5 RANGE OVERVIEW PRODUCT SERIES MATERIA FINISH THREAD GRIP RANGE STUD ENGTH TYPE Call Out Series Grade Specification Thread Size Grip Range IS Type TS GO-BOT Threaded Stud Steel 1008 Yellow Zinc Plated 6-8µ 6-32 UNC Standard 8-32 UNC UNC UNF /4-20 UNC /16-18 UNC PRODUCT SERIES MATERIA FINISH THREAD GRIP RANG TYPE Call Out Series Grade Specification Thread Size Grip Range Type GS GO-SERT Knurled 360 Swaging Series Aluminium 5056 Clear Passivation 6-32 UNC Open End Steel 1008 Zinc Plated 6-8µ 8-32 UNC Stainless Steel AISI UNC UNF 1/4-20 UNC 5/16-18 UNC 3/8-16 UNC 1/2-13 UNC SS GO-NUT Small Flange Smooth Body Steel 1008 Zinc Plated 6-8µ 6-32 UNC Open End 8-32 UNC UNC UNF /4-20 UNC /16-18 UNC /8-16 UNC FS GO-NUT Heavy Duty Flat Head Smooth Body Aluminium 5056 Clear Passivation 6-32 UNC Open End Steel 1008 Zinc Plated 6-8µ 8-32 UNC Stainless Steel AISI 302 Yellow Zinc Plated 6-8µ UNC UNF /4-20 UNC /16-18 UNC /8-16 UNC /2-13 UNC
6 TRADE NAME CROSS REFERENCE TABE BIND RIVETS NUTS GOEBE AVK AVDE BÖHOFF MARSON RIVET KING POP SHEREX ATAS K A- D RIVNUT TW STANDARD HEAD MR IKF T CA AE SK A-K DK RIVNUT TW OW PROFIE HEAD MSR IKR TK CAK AEK FS R-N RIVNUT MRN IR ST CA SS A-O NUTSERT IRR CAO AEO H A-H HEXSERT RIVNUT TW HAF HEX BOD" MHN IHF TH CAH AEH GS A-T MTS ISR CFT/CAT AET B A-R VERSA-NUT PUSNUT MXN IPB CPB AES-P-PB TS A-S RIVKE STANDARD BIND RIVED STUDS MET AES 6
7 PART NUMERING SYSTEM Call Out K SK H B TS GS SS FS PRODUCT SERIES MATERIA FINISH THREAD GRIP RANGE Series GO-NUT arge Flange Knurled Body GO-NUT Small Flange Knurled Body GO-NUT arge Flange Semi Hex Body GO-SPIT arge Flange Prebulbed Slotted Body GO-BOT Threaded Stud GO-SERT Knurled 360 Swaging Series GO-NUT Small Flange Smooth Body GO-NUT Heavy Duty Flat Head Smooth Body" Call Out A S I J Grade Aluminium 5056 Steel 1008 Stainless Steel AISI 302 Stainless Steel AISI 316 Call Out Specification Call Out Thread Size Call Out Grip Range STUD ength Call Out Call Out TYPE 1 Plain Finish UNC Blank Open End 2 Clear Passivation 3 Zinc Plated 6-8µ UNC 80 4 Yellow Zinc Plated 6-8µ Type UNC C Closed End UNF /4-20 UNC /16-18 UNC /8-16 UNC /2-13 UNC
8 TECHNICA TERMS OF THE BIND RIVET NUT Head Body Head - Part of the blind rivet nut, which lies on the component. Body - Part of the blind rivet nut below the rivet head. s Riveted material Grip thickness - Designates the thickness of the material (one or several components) being riveted. Grip range - The material thickness s must be within the minimum and the maximum value for which the particular blind rivet nut is designed. + 0,1 mm SW 1 Dimension of the drilling hole - For cylindrical receiving holes, this dimension is referred to as the diameter mm, and for hexagonal receiving holes - as the width across flats AF 1 (SW 1). Please see the recommended drilling hole dimension on the respective catalogue page. Nose piece Threaded mandrel - Part to screw the blind rivet nut onto. Nosepiece - Part of the setting tool which lies against the head of the blind rivet nut during the setting process. Threaded mandrel 8
9 THE SETTING PROCESS A B C D Spin on Insert Upset Spin off Excess length threaded mandrel = minimum one thread turn Goebel favours the spindle stroke procedure. For setting, the blind rivet nut has to be screwed onto the mandrel of the tool, inserted into the drilled hole of the component and then fixed by activating the tool. In doing so the closing head of the blind rivet nut will be formed. After unscrewing the blind rivet nut, the components can be screwed together. PROCESSING NOTES AND RECOMMENDATIONS We recommend using preferably blind rivet nuts with knurled or hexagonal body in order to eliminate the risk of rotation. It must be ensured that the components cannot rotate against each other. Only a minimum gap is allowed between the components to be connected. Prior to the setting of blind rivet nuts series, determine the optimal settings for your setting tool (stroke setting and/or force setting) conducting a mounting test. SEECTION OF THE BIND RIVET NUT AND BOT DEPENDING ON THE COMPONENT Measure the material thickness of the components to be riveted. This measure must be within the grip range of the blind rivet nut (min. GR max. GR). If one includes the allowed tolerance ranges and if this results in 2 blind rivet nuts for selection, proceed as follows: For hard components, the shorter blind rivet nut with the smaller grip range is to be used. => For example, in case of approx..165 material thickness one should use KS instead of KS For soft components, the longer blind rivet nut with the larger grip range is to be used. => For example, in case of approx..165 material thickness one should use KS instead of KS A relatively broad upset metal is necessary for components made of plastic and soft materials (e.g. aluminum) in order to achieve correspondingly high mechanical values. For that we recommend our special product line with peel blind rivet nuts GO-SPIT. 9
10 MATERIA COMBINATIONS The following rule applies in order to avoid contact corrosion: The connecting parts in a specific application must have at least the same corrosion resistance as the connected components. If this is not possible, the connecting parts must be of higher quality than the components. OVERVIEW WHICH BIND RIVET NUT INTO WHICH SHEET The version you choose also depends on the resistance of the GO-NUT blind rivet nut and screw. Aluminum Steel Stainless Steel AISI 304 Aluminum xxx -- xxx Steel zinc plated x xxx xx Stainless steel AISI 304 xx -- xxx Stainless steel AISI 316 xx -- xxx Copper xx -- xx Brass xx -- xx xxx very advisable xx / advisable x abstemious advisable -- no advisable 10
11 K-SERIES INSERT - GO-NUT ARGE FANGE AND KNURDED BODY k Material: Aluminum AlMg5 [AISI 5056] Finish: Plain Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] [+-.025]* k [+-.003] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] KA KA UNC 17/64 (.2656) [+.006 / -.000] KA KA UNC 19/64 (.2969) [+.006 / -.000] KA KA UNF 19/64 (.2969) [+.006 / -.000] KA KA /4-20 UNC 25/64 (.3906) [+.006 / -.000] KA KA /16-18 UNC 17/32 (.5312) [+.006 / -.000] * KA * KA /8-16 UNC 17/32 (.5312) [+.006 / -.000] * KA * KA /2-13 UNC 11/16 (.6875) [+.006 / -.000] * KA * KA * KA
12 K-SERIES INSERT - GO-NUT ARGE FANGE AND KNURDED BODY k Material: Steel [AISI 1008] Finish: Yellow Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] [+-.025]* k [+-.003] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] KS KS UNC 17/64 (.2656) [+.006 / -.000] KS KS UNC 19/64 (.2969) [+.006 / -.000] KS KS UNF 19/64 (.2969) [+.006 / -.000] KS KS /4-20 UNC 25/64 (.3906) [+.006 / -.000] KS KS /16-18 UNC 17/32 (.5312) [+.006 / -.000] * KS * KS /8-16 UNC 17/32 (.5312) [+.006 / -.000] * KS * KS /2-13 UNC 11/16 (.6875) [+.006 / -.000] * KS * KS * KS
13 K-SERIES INSERT - GO-NUT ARGE FANGE AND KNURDED BODY k Material: Steel [AISI 1008] Finish: Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] [+-.025]* k [+-.003] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] KS KS UNC 17/64 (.2656) [+.006 / -.000] KS KS UNC 19/64 (.2969) [+.006 / -.000] KS KS UNF 19/64 (.2969) [+.006 / -.000] KS KS /4-20 UNC 25/64 (.3906) [+.006 / -.000] KS KS /16-18 UNC 17/32 (.5312) [+.006 / -.000] * KS * KS /8-16 UNC 17/32 (.5312) [+.006 / -.000] * KS * KS /2-13 UNC 11/16 (.6875) [+.006 / -.000] * KS * KS * KS
14 K-SERIES INSERT - GO-NUT ARGE FANGE AND KNURDED BODY k Material: Stainless Steel [AISI 304] Finish: Clear Passivation Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] [+-.025]* k [+-.003] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] KI KI UNC 17/64 (.2656) [+.006 / -.000] KI KI UNC 19/64 (.2969) [+.006 / -.000] KI KI UNF 19/64 (.2969) [+.006 / -.000] KI KI /4-20 UNC 25/64 (.3906) [+.006 / -.000] KI KI /16-18 UNC 17/32 (.5312) [+.006 / -.000] * KI * KI /8-16 UNC 17/32 (.5312) [+.006 / -.000] * KI * KI /2-13 UNC 11/16 (.6875) [+.006 / -.000] * KI * KI * KI
15 SK-SERIES INSERT - GO-NUT SMA FANGE AND KNURDED BODY k Material: Aluminum AlMg5 [AISI 5056] Finish: Plain Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.015] k [+-.003] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] SKA SKA UNC 17/64 (.2656) [+.006 / -.000] SKA SKA UNC 19/64 (.2969) [+.006 / -.000] SKA SKA UNF 19/64 (.2969) [+.006 / -.000] SKA SKA /4-20 UNC 25/64 (.3906) [+.006 / -.000] SKA SKA /16-18 UNC 17/32 (.5312) [+.006 / -.000] SKA SKA /8-16 UNC 17/32 (.5312) [+.006 / -.000] SKA SKA
16 SK-SERIES INSERT - GO-NUT SMA FANGE AND KNURDED BODY k Material: Steel [AISI 1008] Finish: Yellow Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.015] k [+-.003] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] SKS SKS UNC 17/64 (.2656) [+.006 / -.000] SKS SKS UNC 19/64 (.2969) [+.006 / -.000] SKS SKS UNF 19/64 (.2969) [+.006 / -.000] SKS SKS /4-20 UNC 25/64 (.3906) [+.006 / -.000] SKS SKS /16-18 UNC 17/32 (.5312) [+.006 / -.000] SKS SKS /8-16 UNC 17/32 (.5312) [+.006 / -.000] SKS SKS
17 SK-SERIES INSERT - GO-NUT SMA FANGE AND KNURDED BODY k Material: Steel [AISI 1008] Finish: Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.015] k [+-.003] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] SKS SKS UNC 17/64 (.2656) [+.006 / -.000] SKS SKS UNC 19/64 (.2969) [+.006 / -.000] SKS SKS UNF 19/64 (.2969) [+.006 / -.000] SKS SKS /4-20 UNC 25/64 (.3906) [+.006 / -.000] SKS SKS /16-18 UNC 17/32 (.5312) [+.006 / -.000] SKS SKS /8-16 UNC 17/32 (.5312) [+.006 / -.000] SKS SKS
18 SK-SERIES INSERT - GO-NUT SMA FANGE AND KNURDED BODY k Material: Stainless Steel [AISI 304] Finish: Clear Passivation Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.015] k [+-.003] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] SKI SKI UNC 17/64 (.2656) [+.006 / -.000] SKI SKI UNC 19/64 (.2969) [+.006 / -.000] SKI SKI UNF 19/64 (.2969) [+.006 / -.000] SKI SKI /4-20 UNC 25/64 (.3906) [+.006 / -.000] SKI SKI /16-18 UNC 17/32 (.5312) [+.006 / -.000] SKI SKI /8-16 UNC 17/32 (.5312) [+.006 / -.000] SKI SKI
19 H-SERIES INSERT - GO-NUT ARGE FANGE AND SEMI HEX BODY Material: Aluminum AlMg5 [AISI 5056] Finish: Plain Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] [+-.025]* k [+-.003] CODE 6-32 UNC HOE SIZE (ACROSS FATS).250 [+.004 / -.000] HA HA UNC HOE SIZE (ACROSS FATS).250 [+.004 / -.000] HA HA UNC HOE SIZE (ACROSS FATS).281 [+.004 / -.000] HA HA UNF HOE SIZE (ACROSS FATS).281 [+.004 / -.000] HA HA /4-20 UNC HOE SIZE (ACROSS FATS).375 [+.004 / -.000] HA HA /16-18 UNC HOE SIZE (ACROSS FATS).500 [+.004 / -.000] * HA * HA /8-16 UNC HOE SIZE (ACROSS FATS).500 [+.004 / -.000] * HA * HA /2-13 UNC HOE SIZE (ACROSS FATS).687 [+.004 / -.000] * HA * HA * HA
20 H-SERIES INSERT - GO-NUT ARGE FANGE AND SEMI HEX BODY Material: Steel [AISI 1008] Finish: Yellow Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] [+-.025]* k [+-.003] CODE 6-32 UNC HOE SIZE (ACROSS FATS).250 [+.004 / -.000] HS HS UNC HOE SIZE (ACROSS FATS).250 [+.004 / -.000] HS HS UNC HOE SIZE (ACROSS FATS).281 [+.004 / -.000] HS HS UNF HOE SIZE (ACROSS FATS).281 [+.004 / -.000] HS HS /4-20 UNC HOE SIZE (ACROSS FATS).375 [+.004 / -.000] HS HS /16-18 UNC HOE SIZE (ACROSS FATS).500 [+.004 / -.000] * HS * HS /8-16 UNC HOE SIZE (ACROSS FATS).500 [+.004 / -.000] * HS * HS /2-13 UNC HOE SIZE (ACROSS FATS).687 [+.004 / -.000] * HS * HS * HS
21 H-SERIES INSERT - GO-NUT ARGE FANGE AND SEMI HEX BODY Material: Steel [AISI 1008] Finish: Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] [+-.025]* k [+-.003] CODE 6-32 UNC HOE SIZE (ACROSS FATS).250 [+.004 / -.000] HS HS UNC HOE SIZE (ACROSS FATS).250 [+.004 / -.000] HS HS UNC HOE SIZE (ACROSS FATS).281 [+.004 / -.000] HS HS UNF HOE SIZE (ACROSS FATS).281 [+.004 / -.000] HS HS /4-20 UNC HOE SIZE (ACROSS FATS).375 [+.004 / -.000] HS HS /16-18 UNC HOE SIZE (ACROSS FATS).500 [+.004 / -.000] * HS * HS /8-16 UNC HOE SIZE (ACROSS FATS).500 [+.004 / -.000] * HS * HS /2-13 UNC HOE SIZE (ACROSS FATS).687 [+.004 / -.000] * HS * HS * HS
22 H-SERIES INSERT - GO-NUT ARGE FANGE AND SEMI HEX BODY Material: Stainless Steel [AISI 304] Finish: Clear Passivation Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] [+-.025]* k [+-.003] CODE 6-32 UNC HOE SIZE (ACROSS FATS).250 [+.004 / -.000] HI HI UNC HOE SIZE (ACROSS FATS).250 [+.004 / -.000] HI HI UNC HOE SIZE (ACROSS FATS).281 [+.004 / -.000] HI HI UNF HOE SIZE (ACROSS FATS).281 [+.004 / -.000] HI HI /4-20 UNC HOE SIZE (ACROSS FATS).375 [+.004 / -.000] HI HI /16-18 UNC HOE SIZE (ACROSS FATS).500 [+.004 / -.000] * HI * HI /8-16 UNC HOE SIZE (ACROSS FATS).500 [+.004 / -.000] * HI * HI /2-13 UNC HOE SIZE (ACROSS FATS).687 [+.004 / -.000] * HI * HI * HI
23 B-SERIES INSERT - GO-SPIT ARGE FANGE AND PREBUBED SOTTED BODY k Material: Steel [AISI 1008] Finish: Yellow Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+.015 / -.020] [+-.015]* k [+-.005] CODE 1/4-20 UNC.390 [+.006 / -.000] BS BS /16-18 UNC.500 [+.006 / -.000] * BS * BS /8-16 UNC.594 [+.006 / -.000] * BS Processing of GO-SPIT Blind Rivet Nuts requires special tools. We will be happy to advise you on choice of the appropriate tool. 23
24 TS-SERIES THREADED STUD - GO-BOT KNURED BODY k I IS Material: Steel [AISI 1008] Finish: Yellow Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out IS Call Out [+-.020] [max] [+-.010] [+-.025]* k [+-.003] I [max] CODE 6-32 UNC 17/64 (.2656) [+.006 / -.000] TS TS UNC 17/64 (.2656) [+.006 / -.000] TS TS UNC 19/64 (.2969) [+.006 / -.000] TS TS UNF 19/64 (.2969) [+.006 / -.000] TS TS /4-20 UNC 25/64 (.3906) [+.006 / -.000] TS TS /16-18 UNC 17/32 (.5312) [+.006 / -.000] * TS * TS
25 GS-SERIES - GO-SERT KNURED 360 SWAGING SERIES Material: Aluminum AlMg9 [AISI 5056] Finish: Plain Thread Call Out [+-.015] [max] [+-.005] Hole Depth CODE 6-32 UNC GSA UNC GSA UNC GSA UNF GSA /4-20 UNC GSA /16-18 UNC GSA /8-16 UNC GSA /2-13 UNC GSA Mat. Thickness Hole Size / Material Thickness Chart Mat. Thickness Mat. Thickness over Mat. Thickness Thread Size Drill Size Drill Size Drill Size Drill Size 6-32 UNC 7/32 (.2188) #2 (.2210) #1 (.2280) #1 (.2280) 8-32 UNC 1/4 (.2500) F (.2570) 17/64 (.2656) 17/64 (.2656) UNC 9/32 (.2812) (.2900) (.2900) 19/64 (.2969) UNF 9/32 (.2812) (.2900) (.2900) 19/64 (.2969) 1/4-20 UNC 3/8 (.3750) 3/8 (.3750) W (.3860) 25/64 (.3906) 5/16-18 UNC 1/2 (.5000) 1/2 (.5000) 33/64 (.5156) 33/64 (.5156) 3/8-16 UNC 9/16 (.5625) 9/16 (.5625) 37/64 (.5781) 37/64 (.5781) 1/2-13 UNC 3/4 (.7500) 49/64 (.7656) 25/32 (.7810) 51/64 (
26 GS-SERIES - GO-SERT KNURED 360 SWAGING SERIES Material: Steel [AISI 1008] Finish: Zinc Plated 6-8µ Thread Call Out [+-.015] [max] [+-.005] Hole Depth CODE 6-32 UNC GSS UNC GSS UNC GSS UNF GSS /4-20 UNC GSS /16-18 UNC GSS /8-16 UNC GSS /2-13 UNC GSS Mat. Thickness Hole Size / Material Thickness Chart Mat. Thickness Mat. Thickness over Mat. Thickness Thread Size Drill Size Drill Size Drill Size Drill Size 6-32 UNC 7/32 (.2188) #2 (.2210) #1 (.2280) #1 (.2280) 8-32 UNC 1/4 (.2500) F (.2570) 17/64 (.2656) 17/64 (.2656) UNC 9/32 (.2812) (.2900) (.2900) 19/64 (.2969) UNF 9/32 (.2812) (.2900) (.2900) 19/64 (.2969) 1/4-20 UNC 3/8 (.3750) 3/8 (.3750) W (.3860) 25/64 (.3906) 5/16-18 UNC 1/2 (.5000) 1/2 (.5000) 33/64 (.5156) 33/64 (.5156) 3/8-16 UNC 9/16 (.5625) 9/16 (.5625) 37/64 (.5781) 37/64 (.5781) 1/2-13 UNC 3/4 (.7500) 49/64 (.7656) 25/32 (.7810) 51/64 (
27 GS-SERIES - GO-SERT KNURED 360 SWAGING SERIES Material: Stainless Steel [AISI 304] Finish: Clear Passivation Thread Call Out [+-.015] [max] [+-.005] Hole Depth CODE 6-32 UNC GSI UNC GSI UNC GSI UNF GSI /4-20 UNC GSI /16-18 UNC GSI /8-16 UNC GSI /2-13 UNC GSI Mat. Thickness Hole Size / Material Thickness Chart Mat. Thickness Mat. Thickness over Mat. Thickness Thread Size Drill Size Drill Size Drill Size Drill Size 6-32 UNC 7/32 (.2188) #2 (.2210) #1 (.2280) #1 (.2280) 8-32 UNC 1/4 (.2500) F (.2570) 17/64 (.2656) 17/64 (.2656) UNC 9/32 (.2812) (.2900) (.2900) 19/64 (.2969) UNF 9/32 (.2812) (.2900) (.2900) 19/64 (.2969) 1/4-20 UNC 3/8 (.3750) 3/8 (.3750) W (.3860) 25/64 (.3906) 5/16-18 UNC 1/2 (.5000) 1/2 (.5000) 33/64 (.5156) 33/64 (.5156) 3/8-16 UNC 9/16 (.5625) 9/16 (.5625) 37/64 (.5781) 37/64 (.5781) 1/2-13 UNC 3/4 (.7500) 49/64 (.7656) 25/32 (.7810) 51/64 (
28 SS-SERIES INSERT - GO-NUT SMA FANGE SMOOTH BODY k Material: Steel [AISI 1008] Finish: Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [max] [+-.010] k [+-.003] CODE 6-32 UNC 1/4 (.250) [+.006 / -.000] SSS UNC 1/4 (.250) [+.006 / -.000] SSS UNC 9/32 (.2812) [+.006 / -.000] SSS UNF 9/32 (.2812) [+.006 / -.000] SSS /4-20 UNC 3/8 (.375) [+.006 / -.000] SSS /16-18 UNC 1/2 (.500) [+.006 / -.000] SSS /8-16 UNC 1/2 (.500) [+.006 / -.000] SSS
29 FS-SERIES INSERT - GO-NUT HEAVY DUTY FAT HEAD SMOOTH BODY k Material: Aluminum AlMg5 [AISI 5056] Finish: Plain Thread Call Out Grip Range Grip Call Out [+-.015] [+.000 / -.004] [+-.015] k [REF.] CODE 6-32 UNC #12 (.189) [+.003 / -.000] FSA FSA FSA UNC #2 (.221) [+.003 / -.000] FSA FSA FSA UNC 1/4 (.250) [+.003 / -.000] FSA FSA FSA UNF 1/4 (.250) [+.003 / -.000] FSA FSA FSA
30 FS-SERIES INSERT - GO-NUT HEAVY DUTY FAT HEAD SMOOTH BODY k Material: Aluminum AlMg5 [AISI 5056] Finish: Plain Thread Call Out Grip Range Grip Call Out [+-.015] [+.000 / -.004] [+-.015] k [REF.] CODE 1/4-20 UNC Q (.332) [+.003 / -.000] FSA FSA FSA /16-18 UNC Z (.413) [+.003 / -.000] FSA FSA FSA /8-16 UNC 12.5 mm (.490) [+.003 / -.000] FSA FSA FSA /2-13 UNC 5/8 (.625) [+.003 / -.000] FSA FSA FSA
31 FS-SERIES INSERT - GO-NUT HEAVY DUTY FAT HEAD SMOOTH BODY k Material: Steel [AISI 1008] Finish: Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [+.000 / -.004] [+-.015] k [REF.] CODE 6-32 UNC #12 (.189) [+.003 / -.000] FSS FSS FSS UNC #2 (.221) [+.003 / -.000] FSS FSS FSS UNC 1/4 (.250) [+.003 / -.000] FSS FSS FSS UNF 1/4 (.250) [+.003 / -.000] FSS FSS FSS
32 FS-SERIES INSERT - GO-NUT HEAVY DUTY FAT HEAD SMOOTH BODY k Material: Steel [AISI 1008] Finish: Zinc Plated 6-8µ Thread Call Out Grip Range Grip Call Out [+-.015] [+.000 / -.004] [+-.015] k [REF.] CODE 1/4-20 UNC Q (.332) [+.003 / -.000] FSS FSS FSS /16-18 UNC Z (.413) [+.003 / -.000] FSS FSS FSS /8-16 UNC 12.5 mm (.490) [+.003 / -.000] FSS FSS FSS /2-13 UNC 5/8 (.625) [+.003 / -.000] FSS FSS FSS
33 FS-SERIES INSERT - GO-NUT HEAVY DUTY FAT HEAD SMOOTH BODY k Material: Stainless Steel [AISI 304] Finish: Clear Passivation Thread Call Out Grip Range Grip Call Out [+-.015] [+.000 / -.004] [+-.015] k [REF.] CODE 6-32 UNC #12 (.189) [+.003 / -.000] FSI FSI FSI UNC #2 (.221) [+.003 / -.000] FSI FSI FSI UNC 1/4 (.250) [+.003 / -.000] FSI FSI FSI UNF 1/4 (.250) [+.003 / -.000] FSI FSI FSI
34 FS-SERIES INSERT - GO-NUT HEAVY DUTY FAT HEAD SMOOTH BODY k Material: Stainless Steel [AISI 304] Finish: Clear Passivation Thread Call Out Grip Range Grip Call Out [+-.015] [+.000 / -.004] [+-.015] k [REF.] CODE 1/4-20 UNC Q (.332) [+.003 / -.000] FSI FSI FSI /16-18 UNC Z (.413) [+.003 / -.000] FSI FSI FSI /8-16 UNC 12.5 mm (.490) [+.003 / -.000] FSI FSI FSI /2-13 UNC 5/8 (.625) [+.003 / -.000] FSI FSI FSI
35 TOO SEECTION GUIDE RIVET TOOS FROM GOEBE FASTENERS See The Full Tools-Video on Our Website: goebelfasteners.com/media-library BIND RIVET NUTS Fasteners Inc. innovat i ve fastener so lutions M3 M4 M5 M6 M8 M10 M12 GO-35 AS GO-510 AS GO-520 AS HAND GO-12-N GO-35-UN /4" /16" /8" /2" - 13 AS GO-510-UN AS PNEUM. HYDR. GO-520-UN AIRPOWER 4 AS M3 M4 M5 M6 M8 M10 M12 AS /4" /16" /8" /2" - 13 AS M3 M4 M5 M6 M8 M10 M12 CORDESS GO /4" /16" /8" /2" - 13 AS AS A: AUMINUM / COPPER S: STEE I: INOX BUE FIED: RECOMMENDED WORKING RANGE (ASI) EXCEPTIONS ARE INDICATED BY REEVANT ETTERS * = SPECIA NOSE PIECE REQUIRED FOR SETTING 35
36 Fasteners Inc. innovative fastener solutions GOEBE FASTENERS INC GUHN ROAD. SUITE 110 HOUSTON, TX PHONE: + 1 (713) SAES@GOEBEFASTENERS.COM
Fasteners Inc. innovative fastener solutions TOOLS CATALOG. "Quality The First Time"
Fasteners Inc. innovative fastener solutions TOOS CATAOG "Quality The First Time" WHO WE ARE GOEBE FASTENERS INC. is a subsidiary of GOEBE GmbH, which has been the leading corporation in Europe for specialty
More informationQuick Start Manual FLEX 5S. Threaded Insert Power Tool Pull to Stroke Set Up
Quick Start Manual FLEX 5S Threaded Insert Power Tool Pull to Stroke Set Up Part of the FLEX family of modular based tooling. FLEX tooling has the capability to be upgraded from the original base tool.
More informationTerms and Conditions
Terms and Conditions GUARANTEE: All Brighton-Best International, Inc. products are manufactured to rigid quality control standards which meet or exceed industry standards. Records and tests pertaining
More informationInline & 90 Live Swivels Fax:
Inline & 90 Live Swivels www.superswivels.com 763-784-5531 Email: sales@superswivels.com Fax: 763-784-7423 CW1602 Super Swivels was established in 1986. Our goal is to manufacture heavy-duty, leak free,
More informationSC series Stopper Cylinders
SERIES 60,000 PSI tensile strength electro-less nickel rod bearing High strength threaded connection Hard chrome plated 100,000 PSI yield strength rod inc plated dust cover series Stopper Cylinders Common
More informationSC series Stopper Cylinders
High strength threaded connection Low friction cup sealintegral rod wiper Double wound 302 SS retaining wire 60,000 PSI tensile strength electro-less nickel rod bearing Low friction figure 8 piston seal
More informationInstallation and Maintenance Manual for the Lock Down Hatch for the Gauge Hatch Model L61T
Installation and Maintenance Manual for the Lock Down Hatch for the Gauge Hatch Model L61T IOM-L61T Ref. I.D.: 101942 Page 2 of 6 TABLE OF CONTENTS INTRODUCTION 3 DESIGN AND FUNCTION 3 a. FIGURE 1 TYPICAL
More informationInstallation and Maintenance Manual for the Lock Down Hatch for the Gauge Hatch Model L61T
Installation and Maintenance Manual for the Lock Down Hatch for the Gauge Hatch Model L61T IOM-L61T Rev. B 103705 Ref. I.D.: 101942 Page 2 of 7 TABLE OF CONTENTS INTRODUCTION 3 DESIGN AND FUNCTION 3 a.
More informationQuick Start Manual FLEX-5P. Threaded Insert Power Tool Pull to Pressure Set Up
Quick Start Manual FLE-5P Threaded Insert Power Tool Pull to Pressure Set Up Part of the FLE family of modular-based tooling. FLE tooling has the capability to be upgraded from the original base tool.
More informationAlcoa Fastening Systems. Camloc Quick-Operating Fasteners
Camloc Quick-Operating Fasteners Contents Page General Information... A-2 Important Information... A-3 - A-4 General Installation Instructions for 1/4-Turn Fasteners... A-5 1/4-Turn Fasteners 5F Series...
More informationTITAN 13 x 2½ BRAKES DUO-SERVO AND FREE BACKING
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationOWNER S GUIDE 8A DURALIFT II 13,200 LB. CAPACITY. Link Mfg. Ltd th St. N.E. Sioux Center, IA USA
OWNER S GUIDE 8A000715 DURALIFT II 13,200 LB. CAPACITY Link Mfg. Ltd. 223 15th St. N.E. Sioux Center, IA USA 51250-2120 www.linkmfg.com QUESTIONS? CALL CUSTOMER SERVICE 1-800-222-6283 DEALER / INSTALLER:
More informationP0440. Plastic Head Knurled Thumb Screws. Screws d 4 d 1 d 2. d 3. h 2 h 1. l 1
Thumb Pastic Head Knured Thumb 0.5 2 d 4 P0440 1 Thermopastic (PA), back knob. Thread stainess stee (A2) or stee (zinc-pated). Technica Notes Temperature resistant from -30 C to +80 C. Order No. 1 d 4
More informationCONTROL-FLEX COUPLINGS. 2 Phone Fax Outstanding Features and Benefits. Benefit.
CONTRO-FEX COUPINGS Ideal for encoders, Control-Flex Couplings are available with clamp-style zero backlash hubs or in a drop-out design for easy flexible disc changeout. The Control-Flex Coupling was
More informationHUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS INSTRUCTION MANUAL
INSTRUCTION MANUAL 230 PNEUDRAULIC INSTALLATION TOOL HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS HUCK FASTENERS U.S. Patent 4,878,372; 4,964,292
More informationCrescent Flush Manifold FOR LIQUID LAUNDRY SUPPLY SYSTEMS
Crescent Flush Manifold FOR LIQUID LAUNDRY SUPPLY SYSTEMS Reference Manual FM-300 Series Copyright 2005 Nova Controls, Inc. P/N 20-08195-00 Rev. B i ii 1 Description Overview The FM-300 series Flush Manifold
More informationPower Wheel. 1:1 Drives/Bearing Housings
Power Wheel 1:1 Drives/Bearing Housings 260.925.3200 AuburnGear.com Table of Contents Power Wheel 1:1 Features...3 Model 6B 1:1 Direct Drives...4 Model 8B 1:1 8T2 Direct Drives...6 Model 8B 1:1 8S2 Direct
More informationCW Optimizer Capacity Hat Kit. 75/80 and 80/40 Thunderbolt Vertical Antennas. for the DXE-7580-THK
CW Optimizer Capacity Hat Kit for the 75/80 and 80/40 Thunderbolt Vertical Antennas DXE-7580-THK DXE-7580-THK-INS Revision 1a DX Engineering 2012 P.O. Box 1491 Akron, OH 44309-1491 USA Phone: (800) 777-0703
More informationGERINGHOFF. Corn Header Manual f HEADSIGHT.COM
GERINGHOFF Corn Header Manual 09020701f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationH Series. HECO Interchange Series Power Wheel. Planetary Gear Drive
H Series HECO Interchange Series Power Wheel Planetary Gear Drive CONTENTS Introduction 3 Auburn Gear, Inc. versus HECO - Gear and Bearing Ratings Comparison 4-5 Model 6 Center Flange Shaft Output Drives
More informationAGCO. Corn Header Manual d HEADSIGHT.COM
AGCO Corn Header Manual 09020401d HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationFIGURE 310AM, 310AMSW & 311AM 3-PIECE BALL VALVE
INTRODUCTION This instruction manual includes installation, operation and maintenance information for the figure 310AM, 310AMSW, and 311AM 3-piece 1000CWP, threaded end (NPT) or socket weld end (SW) ball
More informationHPx-JDx3-xx HARNESS INSTALLATION
HPx-JDx3-xx HARNESS INSTALLATION Conversion Manual 09040106b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760
More informationInstruction Sheet EWR SERIES EWR WALL CABINET R
Instruction Sheet EWR SERIES EWR WALL CABINET C UL US R LISTED THANK YOU Thank you for purchasing the EWR Wall Cabinet. Please read these instructions thoroughly before installing / assembling this product.
More informationWIRING DIAGRAMS FOR BRIDGE CONTROL PANELS
WIRING DIAGRAMS FOR BRIDGE CONTROL PANELS Bridge W/D's Panel Part # Page No. Nema-4/12 1-Speed 444231-** 2 Nema-4/12 1-Speed with Soft-Start 444711-** 3 Nema-4/12 2-Speed 444232-** 4 Nema-4/12 2-Speed
More informationEASY CONNECT CRANE KIT Festoon Conductor Systems
ASSEMBLY INSTRUCTION MANUAL EASY CONNECT CRANE KIT Festoon Conductor Systems October, 2005 Copyright 2005, Yale Lift-Tech, division of Columbus McKinnon Corporation Part No. 117463-05 Mounting Instructions
More informationINSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTION AND SERVICE MANUAL Actuator/Trailer Dealer - Please provide these instructions to the consumer. Consumer - Read and follow these instructions. Keep them with the trailer for future
More informationFlo-Way. Measure Granular or Powdered Material. Stand Alone or Connect to Other Devices for Blending. Used by Successful Producers World-Wide
Flo-Way R Solids Impact Flow Meter Measure Granular or Powdered Material Stand Alone or Connect to Other Devices for Blending Used by Successful Producers World-Wide Visit our website: www.beltwayscales.com
More informationReference Manual FM-200 Series
Flush Manifold A/P FOR LIQUID LAUNDRY SUPPLY SYSTEMS Reference Manual FM-200 Series Copyright 2004 Nova Controls, Inc. P/N 20-07941-00 Rev. C i P/N 20-07941-00 Rev. C ii P/N 20-07941-00 Rev. C 1 Description
More informationWARRANTY REGISTRATION AND POLICY
WARRANTY REGISTRATION AND POLICY Buhler Manufacturing products are warranted for a period of twelve (12) months from original date of purchase, by original purchaser, to be free from defects in material
More informationDRAGO. Corn Header Manual f HEADSIGHT.COM
DRAGO Corn Header Manual 09020801f HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationTABLE OF CONTENTS DESCRIPTION. Safety Instructions & Safety Sign Locations Operating Instructions Assembly Instructions...
TABLE OF CONTENTS DESCRIPTION PAGE Warranty... 1 Safety Instructions & Safety Sign Locations... 2 Operating Instructions... 3 Assembly Instructions... 5 500 & 600 Snowblower Drawings... 8 500 & 600 Snowblower
More informationLBH / LBFR SERIES. Instruction Sheet. Telescoping Lacer Bar
Instruction Sheet LBH / LBFR SERIES Telescoping Lacer Bar THANK YOU Thank you for purchasing the LBH / LBFR Series Telescoping Lacer bar. Please read these instructions thoroughly before installing this
More informationBreeder Control Installation Manual
Breeder Control Installation Manual Patented U.S. Patent No. 7,980,129, Patent No. 8,581,122, Patent No. 8,853,566 07/10/2018 Table of Contents Installation Overview... 3 Components... 3 BinTrac Breeder
More informationC-RAIL LADDER TRAY SYSTEM
C-RAIL LADDER TRAY SYSTEM 20 OCEAN-1 MARINE PRODUCTS, LTD. MARINE & OFFSHORE CABLE TRAY SYSTEMS Section Page Marine Channel 2 Flatbar Ladder Tray 35 C-Rail Leg-In Ladder Tray 46 I-Beam Ladder Tray 67 Important
More informationVANGUARD Series 36" Slant Wall and Cone Direct Drive Fans Installation & Operator s Instruction Manual
VANGUARD Series 36" Slant Wall and Cone Direct Drive Fans Installation & Operator s Instruction Manual MV1600-1C 9/99 1625-003 2/2000 March 200 Chore-Time Warranty VANGUARD Series 36" Slant Wall and Cone
More informationInstallation, Operation and Maintenance of Airflex Model AA2, B2, B3 and C2 Rotorseals
RS 9010 Warning Forward this manual to the person responsible for Installation, Operation and Maintenance of the product described herein. Without access to this information, faulty Installation, Operation
More informationCORN HEADER MANUAL: CNH PRE-2012
CORN HEADER MANUAL: CNH PRE-2012 09020201c HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email:
More information3M Boron Carbide Blasting Nozzles Performance at full blast
3M Boron Carbide Blasting Nozzles Performance at full blast Blasting nozzles of 3M Boron Carbide and 3M Silicon Carbide have a proven track record over decades of use, due to their extreme wear resistance,
More informationENTERTAINMENT. BGV-D8+ Supplement to Manual # Tonne to 1.3 Tonne 250 kg to 1300 kg (REV. AA) E627NH
ENTERTAINMENT BGV-D8+ Supplement to Manual #00000999.25 Tonne to 1.3 Tonne 250 kg to 1300 kg Columbus McKinnon Corporation CM Entertainment 140 John James Audubon Parkway Amherst, New York 14228-1197 1-800-888-0985
More informationFIGURE 310A & 311A 3-PIECE BALL VALVE
INTRODUCTION This instruction manual includes installation, operation and maintenance information for the figure 310A, 310ASW, 311A, and 311ASW 3-piece 1000CWP, threaded end (NPT) or socket weld end (SW)
More informationLED Emergency Drivers
LED Emergency Drivers 30 YEARS OF EXCELLENCE Since 1985 Incorporated in the state of California in 1985, McWong International, Inc. has grown to become a strategic supplier of high-quality lighting control
More informationPCC O P E R A T I O N S. Pump Cycle Counter M A N U A L. Environmental Systems
O P E R A T I O N S Environmental Systems PCC Pump Cycle Counter M A N U A L PO Box 3726 Ann Arbor, Michigan 48106-3726 (800) 624-2026 North America Only (734) 995-2547 Tele. (734) 995-1170 Fax info@qedenv.com
More informationDISCONTINUED VERSION Parts listed in this catalog may no longer be available. ILLUSTRATED PARTS CATALOG
BUNN WL WARMER DISCONTINUED VERSION Parts listed in this catalog may no longer be available. FRONT REAR ILLUSTRATED PARTS CATALOG Designs, materials, weights, specifications, and dimensions for equipment
More informationMega-Rail System Installation
Installation Manual Mega-Rail System P/N 030767-MRS 2003-2007 DODGE CUMMINS Mega-Rail System Installation Installation Instructions GDP 03-07 Mega-Rail System P/N 030767-MRS PLEASE READ ALL INSTRUCTIONS
More informationLEXION SINGLE FUNCTION HYDRAULIC VALVE KIT
LEXION SINGLE FUNCTION HYDRAULIC VALVE KIT Conversion Manual 09062010b HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022
More informationSHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS)
SHAW-BOX INSTRUCTIONS AND PARTS LIST SHAW-BOX RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL SHAW-BOX Rigid Mount I-Beam Trolleys are designed
More informationAir and water reels. Models and Series B. Installation and maintenance guide DANGER
Installation and maintenance guide Air and water reels Models 83753 and 83754 Series B Date of issue June 2014 Form number 404665A Section E35 Page 83A DANGER Read manual prior to installation or use of
More informationInstructions and Parts List 3M-Matic P/N Infeed/Exit Conveyor Attachment, 1.2 Meter
Instructions and Parts List TM 3M-Matic P/N 78-8069-3971-2 Infeed/Exit Conveyor Attachment, 1.2 Meter Type 19100 The Infeed/Exit Conveyor, 1.2 Meter, has been designed and tested to be used only with 3M-Matic
More informationModel 0390 EZFILL TOP FILL MULTIFEED KIT WITH 1.32 GAL. (5L) CONTAINER EZFILL KIT* INSTALLATION AND MAINTENANCE GUIDE
Model 0390 EZFILL KIT* EZFILL TOP FILL MULTIFEED KIT WITH.32 GAL. (5L) CONTAINER INSTALLATION AND MAINTENANCE GUIDE 3070623 Rev G 20 July 205 Space Provided For Owner Notes * EZFILL KIT pictured with optional
More informationInstallation, Operation and Maintenance Manual for Pressure/Vacuum Relief Valves
Installation, Operation and Maintenance Manual for Pressure/Vacuum Relief Valves Models 1200A, 1220A, 1260A, 1300A, 1360A, 2300A 2009 Groth Corporation IOM-1200A Rev. C 12793 Ref. ID: 95729 Page 2 of 18
More informationDual Phase Extraction Inlet. Patent No Installation Manual. P/N Rev
Patent No. 6520259 Installation Manual P/N 95232 Rev 6-16-11 Table of Contents ing Extraction Inlets track changing water levels to maintain optimum performance 1.Component Identification Page 1 2. How
More informationInstruction Sheet. SFR Series. Swing Frame rack
Instruction Sheet SFR Series Swing Frame rack THANK YOU Thank you for purchasing the SFR Series Swing Frame Rack. Please read these instructions thoroughly before installing/assembling this product. PRODUCT
More information3M-MaticTM. Tape Edge Fold Kit. Instructions and Parts List. For Use On: AccuGlide TM STD Upper and lower Taping Heads. Purpose of Attachment
Instructions and Parts List 3M-MaticTM Tape Edge Fold Kit For Use On: AccuGlide TM STD Upper and lower Taping Heads Kit Part Number Fits 78-8095-4854-4 2 Inch Upper Head 78-8095-4855-1 2 Inch Lower Head
More informationRear Weight Kit 19A , OEM-19A-218 & M060
Operator s Manual Rear Weight Kit 19A-218-000, OEM-19A-218 & 490-900M060 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY
More informationAPPLICATIONS CATALOG. Husaberg. Husaberg. Husaberg. Husaberg. Husaberg. Husaberg. Husaberg. Husaberg
APPLICATIONS CATALOG CABLES I THROTTLES I THROTTLE TUBES I THROTTLE KITS I LEVERS husaberg APPLICATIONS CATALOG ALL THE IMPORTANT STUFF Terms of Business: Motion Pro sells to authorized powersports distributors,
More information2600/2700 Series. Determining the stud length number when using receptacle: Type 1 + 3* G = P + F. * For Type 3: G = 9,9 mm min.
Particular Features Max. tensile strength 1.330 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle designs. 2600 Series: Fillister head; 2700 Series:
More informationINTRODUCTION INSTALLATION
INTRODUCTION INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS This instruction manual includes installation, operation and maintenance information for the figure G73 gear operator. The figure G73 is
More informationHose reel. Models and Installation and maintenance guide. Danger
Installation and maintenance guide Hose reel Models 81133 and 81323 Date of issue March 2014 Form number 402674B Section E35 Page 75B Danger Read manual prior to installation or use of this product. Keep
More informationASSEMBLY OF TROLLEY TO HOIST
INSTRUCTIONS AND PARTS LIST RIGID MOUNT I-BEAM AND PATENTED TRACK TROLLEYS (PUSH & HAND GEARED - 1/2 THRU 15 TON RATED LOADS) GENERAL Yale Rigid Mount I-Beam Trolleys are designed especially for use on
More informationSERIES 9000 Double Offset HP Butterfly Valves
SERIES 9000 Double Offset HP Butterfly Valves Publication S9000-101 Issue 5/18 Rev. D DESIGN Design Characteristics STEM DESIGN: Available in square shaft for easy mounting of actuators, levers and gear
More informationRV-10 Center Arm Rest Console
RV-10 Center Arm Rest Console Important Notice: This manual contains important information that may affect the safety of your aircraft. Read the Warranty / Agreement below. There is information in the
More informationFIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE //
FIRESAFE & LETHAL SERVICE BALL VALVE CATALOGUE // FIRESAFE & LETHAL SERVICE BALL VALVES // CONTENTS // FIRESAFE & LETHAL SERVICE BALL VALVES //» 1" Firesafe / Lethal Service Ball Valve» 2" Firesafe / Lethal
More informationSOARER TT BLOW-OFF VALVE ADAPTOR INSTRUCTIONS
IMPORTANT NOTES ON FITTING YOUR BOV SOARER TWIN TURBO ADAPTOR Turbosmart recommends that your Blow Off Valve (BOV) and Adaptor kit is fitted by an appropriately qualified technician. ADAPTOR KIT CONTENTS
More informationPFS Rotameter. Variable Area Flowmeter. Instruction Manual PFS-RM200, RM230, RM250
PFS Rotameter 09/2018 Rev. 0 Variable Area Flowmeter Instruction Manual PFS-RM200, RM230, RM250 Please note: This instruction manual provides detailed information and instructions that must be read, understood
More informationRear Weight Kit M060
Operator s Manual Rear Weight Kit 490-900-M060 WARNING READ AND FOLLOW ALL SAFETY RULES AND INSTRUCTIONS IN THIS MANUAL BEFORE ATTEMPTING TO OPERATE THIS MACHINE. FAILURE TO COMPLY WITH THESE INSTRUCTIONS
More informationSample Pro 3/4" Portable MicroPurge Pump. User's Guide P/N REV The World Leader in Air Powered Pumps
PATENT PENDING Pro 3/4" Portable MicroPurge Pump User's Guide P/N 959 REV. -8-03 The World Leader in Air Powered For Remediation, Landfills and Ground Water Sampling Ground water Sampling Remediation,
More informationOPERATING INSTRUCTIONS AND PARTS LIST BRIDGE DRIVE GEAR CASE
OPERATING INSTRUCTIONS AND PARTS LIST BRIDGE DRIVE GEAR CASE GENERAL Units are intended to be used within 30 days after receipt. If they are to be stored for a longer period of time, contact the factory
More informationTank Monitor. Instruction manual DTM01. Tank Monitor
EN Tank Monitor Instruction manual DTM01 Tank Monitor 1 2 3 1 2 4 3 2 1 4 2 Notes on using the manual Table of contents EN 1 Notes on using the manual 3 2 General safety instructions 3 3 Intended use 4
More informationL DODGE CUMMINS Maximizer System
Installation Manual P/N 07509MAX 2007.5-09 6.7L DODGE CUMMINS Maximizer System Installation Instructions P/N 07509MAX GDP Big Line Kit Installation PLEASE READ ALL INSTRUCTIONS BEFORE BEGINNING INSTALLATION
More informationSaf-T-Bar Conductor Bar T Series
Saf-T-Bar Conductor Bar T Series P/N 964001 2012.04.12 Rev. 6 SERIES T SAF-T-BAR CONDUCTOR BAR 1 Conductix Incorporated The technical data and images which appear in this manual are for informational purposes
More informationECONOMY SPRAYERS GC SERIES
ECONOMY SPRAYERS GC SERIES Parts Manual For Models: GC400 & GC600 Form: GCSeriesSprayers.indd October 2011 TABLE OF CONTENTS SECTION DESCRIPTION... PAGE 1 Introduction... 1 1.1 Purchaser s Responsibility...
More informationHydraulic Fittings. Design, Manufacture, Distribution
Hydraulic Fittings Design, Manufacture, Distribution Hydraulic Fittings are exclusively distributed by Beaumanor Engineering Ltd of Leicester and manufactured by Balu Auto Components of Chennai India,
More informationInstruction Sheet DWR SERIES SECTIONAL WALL MOUNT RACK
Instruction Sheet DWR SERIES SECTIONAL WALL MOUNT RACK C UL R US LISTED THANK YOU Thank you for purchasing the DWR Series Sectional Wall Rack. Please read these instructions thoroughly before installing
More informationBe Strong. Assembly Manual Commercial Series Bike U916. Model: U916. P/N: Rev D (03/28/07)
Be Strong. Assembly Manual Commercial Series Bike U916 Model: U916 P/N: 001-6883 Rev D (03/28/07) preface Thank you for purchasing the Nautilus Commercial Series U916 bike. For more than 30 years Nautilus,
More informationDodge Ram 1500, Quad/Reg. Cab, w/6.4ft. & 8ft. Bed, 2 & 4 WD. For updates see PRODUCT SUPPORT tab at
Assembly, Installation, Operation and Maintenance Instructions 2009-2016 Dodge Ram 1500, Quad/Reg. Cab, w/6.4ft. & 8ft. Bed, 2 & 4 WD. Part # 30665 Dealer / Installer: Provide a copy of these Instructions
More informationUniTorq UTQ Quarter-Turn Actuator Installation and Operation Manual
UniTorq UTQ 1.5 6.4 Quarter-Turn Actuator Installation and Operation Manual Thank you for purchasing our UTQ 1.5-6.0 Electric Actuators Before installation or operation of the actuator carefully review
More informationWe greatly appreciate your business and promise to work hard to provide you with the highest level of service at all times.
Thank you for purchasing a Magnaglide from Airlift Doors, Inc. We take great pride in the quality and workmanship of our products and stand behind our products 100%. If you have any questions or concerns
More informationForce Test Stands Series ES MODELS ES10 & ES20. User s Guide
Force Test Stands Series ES MODELS ES10 & ES20 User s Guide Models ES10 & ES20 Thank you! Thank you for purchasing a Mark-10 Series ES Force Measurement Test Stand. We are confident that you will get many
More informationAGCO Conversion Manual a HEADSIGHT.COM
AGCO 3300 Conversion Manual 09040404a HEADSIGHT.COM 574.546.5022 About Headsight Headsight Contact Info Headsight, Inc. 4845 3B Road Bremen, IN 46506 Phone: 574-546-5022 Fax: 574-546-5760 Email: info@headsight.com
More informationMasoneilan* 7700P/7700E Series Pneumatic & Electro-Pneumatic Positioner for Masoneilan* VariPak* Control Valve
GE Oil & Gas Masoneilan* 7700P/7700E Series Pneumatic & Electro-Pneumatic Positioner for Masoneilan* VariPak* Control Valve Parts Supplement Information GE Data Classification: Public THESE INSTRUCTIONS
More informationWall mount PMV pump with suction kits and hoses
Installation and maintenance guide Wall mount PMV pump with suction kits and hoses Models V30500SWM, V40600SWM, V41000SWM, series A NOTE: Oil drum shown for illustration only, not included. Date of issue
More information37SCENE 46SCENE 79SCENE
Installation and Operation Instructions LED SCENE LIGHT LED SCENE LIGHT 37SCENE 46SCENE 79SCENE 37SCENE 46SCENE Introduction The 37SCENE, 46SCENE, 79SCENE LED Scene Lights are designed for the emergency
More informationProduct/ Title Guardian Super Flex Shaft Coupling Product/ Title
Product/ Title Guardian Super Flex Shaft Coupling Product/ Title GUA-MRK-DOC-027 P-XXXX-GC Service&&Installation Installation Instructions Instructions Service An Altra Industrial Motion Company TABLE
More informationAIRLINE EQUIPMENT CATALOGUE //
AIRLINE EQUIPMENT CATALOGUE // 16 15 14 13 12 11 10 9 The Fort Vale Range of Airline Ball & Butterfly Valves 8 Fort Vale Engineering Ltd. 2014 THIS PAGE IS INTENTIONALLY BLANK AIRLINE VALVE CATALOGUE //
More informationInstallation Instructions Application Fits 2016 Tesla Model X The Law Removable License Plate Frame X7340
Installation Instructions Application Fits 2016 Tesla Model X The Law Removable License Plate Frame X7340 Parts Inventory Item Image Item Description Quantity Grill Bracket 1 License Plate Bracket 1 1
More informationMicroscope light manual
Microscope light manual LS-12 and LS-14 LS-12 LS-14 1/9 Content Overview... 3 Mounting... 4 Light adjustment... 5 Mirror... 6 Filters... 6 Replacing microscope light... 7 Technical data... 8 Troubleshooting...
More informationInstallation and Operation Instructions Safety Director Arrow
Installation and Operation Instructions Safety Director Arrow! WARNING! Failure to install or use this product according to manufacturers recommendations may result in property damage, serious bodily/personal
More informationStandard Coiled Spring Pins Specifications and Technical Data
Standard oiled Spring Pins Specifications and Technical Data PIN DUTIES M Standard H Heavy ight MATERIA B High arbon Steel hrome Stainless Steel D Nickel Stainless Steel W Alloy Steel FINISHES K Plain,
More informationLUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type
INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)
More informationWashington, DC U.S.A. SC-M150-00X Axial Flux, Permanent Magnet, DC Brushless Electric Motor Operating Manual Version 1.00
Washington, DC U.S.A. SC-M150-00X Axial Flux, Permanent Magnet, DC Brushless Electric Motor Operating Manual Version 1.00 1 TABLE OF CONTENTS 1. SC-M150 MOTOR SERIES...3 2. ELECTRICAL CONNECTIONS...3 2.1
More informationDo not install and/or operate this safety product unless you have read and understand the safety information contained in this manual.
Installation and Operation Instructions MR Tri- Light Available in various color combinations, the MR Directional LED surface mount, tri-color warning light is ideal for a wide variety of auxiliary warning
More informationM39075 ( IF- 1) Integra- Fuse Rivet Tool
M39075 ( IF- 1) Integra- Fuse Rivet Tool Marson is making installation easier than ever with the new Marson Integra-Fuse (IF-1) It s the one-and-only tool needed for single-pull installations of open-end
More informationInstallation and Maintenance Instructions
Installation and Maintenance Instructions Limited One Year Warranty T&S warrants to the original purchaser (other than for purposes of resale) that such product is free from defects in material and workmanship
More information7-Ton Electric Log Splitter MODEL NUMBER : OPERATION & PARTS MANUAL FOR YOUR SAFETY!
7-Ton Electric Log Splitter Use 10w Tractor Hydraulic Fluid (22-32 ISO Viscosity) MODEL NUMBER : PK65575 Save This Manual for Future Reference 1 OPERATION & PARTS MANUAL FOR YOUR SAFETY! Please read these
More informationFemale Plug. connecting to Fuel Quantity
**Ag Diesel Solutions recommends replacing the Transorb/Suppressor Diode before the installation of this module*** Red wire = 12V Constant power. Male Plug connecting to Fuel Quantity Valve Black wire
More information4002 Series. Determing the stud length number when using receptacle: Type Type 3. G = P + F (8,9 min.) Release January 2009 G-1
Particular Features Max. tensile strength.00 N. Small-size fastener for high tensile load. Wide variety of conventional stud assembly and receptacle design. Floating receptacles available. Selection Instructions
More informationGM 6.6L Duramax. Up to 90HP Gain. AgDieselSolutions.com
21700 Module Installation Guide 2017 GM 6.6L Duramax *L5P* Up to 90HP Gain 1-3 MPG Fuel Savings AgDieselSolutions.com Adjustable Switch Female Fuel Pressure Sensor Connector Male Fuel Pressure Sensor Connector
More informationMud Pump (Emsco Type) Diesel Engine
Houston: +1 713-893 - 5018 Beijing: +86 10 82898786 E-mail: info@cppipe.com Website: www.cppipe.com www.cppipe.cn CP Pipe & Equipment Corporation (CP) is a major US supplier of tubular products, petroleum
More information