Wide-Format Laminator Resource Guide
|
|
- Prudence King
- 5 years ago
- Views:
Transcription
1 DIGITAL PRINTING AND FINISHING DIGITAL GRAPHICS PRESSURE SENSITIVE (COLD) LAMINATORS (cont.) Drytac Corp. - Richmond, VA - ML13 $ n/a 12 Table top manual laminator for ML25 $ n/a 12 small jobs JM18 $ JM26 $ JM34 $1, Table top model, foot pedal or auto controls, adjustable speed JM55SHA-HA $6, Foot pedal or auto control, adjustable speed, single height nip JM63SHA-HA $7, adjustment and heat assist roller up to 113 F JM55Fuzion $7, Auto and foot ped control, top/ bottom supply shafts, rear/front take up/feed shafts, heat assist JM63Fuzion $8, top roller JM63Pro $11, Eastsign International Ltd. - Hong Kong - BU-1600II.WARM $2, BU-1600II.MULT $2, Heated top roller up to 248 F, foot pedal, top/bottom supply shafts with brake tension Heat assist, hand wheel, foot pedal, film and media rewind Hand wheel, foot pedal, film and media rewind BU-1600II.PLUS $1, Foot pedal, film and media rewind BU-1400ZJY $5, BU-1600ZJY $5, BU-1700ZJY $6, BU-1400ZJY-B $4, BU-1600ZJY-B $5, BU-1700ZJY-B $5, GBC - Lincolnshire, IL - (inches) Max Speed (fpm) Electronic Safety? Heat assist, foot pedal, film and media rewind, roll-to-roll, electronic lift mechanism Foot pedal, film and media rewind, roll-to-roll, electronic lift mechanism SPIRE I 54C $4, / Foot pedal, auto-grip and multicore SPIRE I 64C $5, / shaft SPIRE II 54C $4, SPIRE II 64C $5, SPIRE III 64Ct $9, Arctic Titan 1040WFc $5, / Arctic Titan 1064WFc $8, / Extended feed & output tables, foot pedal, optional rewind/unwind shafts, optional swing-up feed table, auto-grip & multi-core shaft Extended tables, top heat-assist, foot pedal, optional rewind/unwind shafts, more Foot pedal 640t $6, / Foot pedal, top heat-assist 2064Ct $20, WFt $24, Top heat-assist, foot pedal, dynamic brake system Top heat, foot pedal, dynamic brake system, cutter 34 June 2013 SIGN & DIGITAL GRAPHICS
2 PRESSURE SENSITIVE (COLD) LAMINATORS (cont.) Graphic Finishing Partners - Green Lake, WI C $2, / C $3, Pre-mask, single wheel pressure, media unwind, 110v Chain drive rewind, single wheel pressure, media unwind, 110v 455 TH $7, Top heat-assist, foot pedal or auto control, adjustable speed, dual 463 TH $7, tension control, swing up feed 12 table, roll-to-roll, 4.5 diameter 563 TH Max Pro $8, rollers, 110v, machine stand with 12 casters LEDCO Inc. (Div. of Graphic Laminating) - Hemlock, NY - EP V $3, / Pre-mask tape applicator Signmaster 44 $10, / Heated top roller Econocraft 44 $10, / Stand, casters and foot pedal Econocraft 60 $10, / Stand, casters and foot pedal Econocraft 60 w/rtlu $13, / Release liner take up stand B64 $36, Heated top roller Neschen Americas - Elkridge, MD - SEAL 54 EL $5, Flip up in-feed table, optional roll 12 6 trough SEAL 65 EL $7, SEAL 62 Base $11, Flip up in-feed table, optional roll trough Heat-asst. top roller, opt. roll/roll, low take-up SEAL 54 Base $10, Heat-assist top roller, roll trough Quality Media & Laminating Solutions - North Haven, CT - QMLS 64 TLX $7, QMLS 64 TLX-P $8, Rolinx - Irving, TX - (inches) Starter 1080 $4, Starter 1400 $5, Starter 1600 $5, Mistral 1650 $11, Mistral 2100 $16, Arkane 1650 $12, Max Speed (fpm) Electronic Safety? Heat-asst., 2 heated rollers, 3 unwind/rewind shafts Top heated roller, motorized nip, rear rewind Auto grip shafts c/w roll alignment, foot pedal control, dual direction, pressure indicator, removable infeed table, self adjusting take-up shaft. Optional feeding bar and print roll holder, print rewind, more Heat-assist top roller 140 F, selfcalibrating rollers, flip up infeed table c/w infeed guide, 5 auto grip shafts, self-adjusting take-up, more Top heated roller 285 F, self-calibrating rollers, flip up table, 5 auto grip shafts, more SIGN & DIGITAL GRAPHICS June
3 DIGITAL PRINTING AND FINISHING DIGITAL GRAPHICS PRESSURE SENSITIVE (COLD) LAMINATORS (cont.) Royal Sovereign Intl. - Rockleigh, NJ - RSC-1650LS $7, Front & rear controls RSC-1650LSH $8, Front & rear controls, heat-assist top roller RSC-1401CW $6, RSC-1401HW $6, RSC-1050CL $4, / RSC-820CLS $3, / SID Signs - Miami, FL - SL SA $2, Supply55 Inc. - Ann Arbor, MI - (inches) Max Speed (fpm) Guardian 55-LM1650CL01 $5, Electronic Safety? Front & rear controls, includes rear rewinder Front & rear controls, heat-assist top roller, includes rear rewinder Includes stand and foot pedal Semi-automatic cold laminator with stand, foot pedal, dual direction feed system and media liner take-up roller Foot pedal control, idler bars, forward/reverse, all steel construction, drop in mandrels, optional take-up system USTech - Orlando, FL WORF MJ-600 $1, WORF MJ-500 $1, Auto grip shafts, forward/reverse, foot pedal, auto release take-up WORF MJ-400 $1, shaft WORF MJ-300 $1, WORF AK-600 $1, Auto grip shafts, forward/reverse, auto release liner take-up shaft, WORF AK-400 $1, Includes stand and foot pedal, WORF AK-300 $1, mount & laminate, optional roll to roll WORF VT-600 $2, Auto grip shafts, foot pedal, handle adjustment on top roller, WORF VT-500 $2, auto release take-up, optional roll to roll WORF MVT-600 $2, Motor driven raise and lower top rollers, other features is the same WORF MVT-500 $2, as VT-series WORF DC-650 $3, Auto grip shafts, forward/reverse, roller to roller, foot pedal, auto WORF DC-550 $3, release take-up, auto rewind shaft WORF MDC-650 $3, Motor driven raise and lower top rollers, other features is the same WORF MDC-550 $3, as DC-series WORF PRO65-C $3, Auto grip shafts, forward/reverse, WORF PRO55-C $3, roller to roller, foot pedal, auto release take-up, auto rewind shaft, WORF PRO45-C $3, shift system WORF PRO65-CM $3, Motor driven raise and lower top rollers, other features is the same WORF PRO55-CM $3, as PRO C-series WORF TX-600H $4, Same as PRO series, w top roller WORF TX-500H $4, heated, temp adjustable up to 250F 36 June 2013 SIGN & DIGITAL GRAPHICS
4 THERMAL AND HEAT-ASSIST LAMINATORS Advanced Greig Laminators - DeForest, WI - Encore SH $15, T Encore DHR $21, D Encore Maxim $23, D Pneumatically actuated nip assembly as well as a pneumatically actuated pull roll assembly 64t $17, T Heated top nip roller only 64r $27, D Reversible multipurpose machine 64i $28, D Repeatable process controls 6400 $34, D Pnuematic unwind tension controls 8000t $34, T Heated top nip roller only 8000s $47, D Thermal and pressure-sensitive 8000r $54, D materials Coda Inc. - Mahwah, N.J. - Coda Laminator 54 Coda Laminator 44 $6,600 $5, D D Cold, heat assist or thermal, optional bottom feed/take, custom machines available D&K Group, Inc. - Elk Grove Village, Ill. - EXP 42 Pouch $3, /2 T EXP 42 Plus $5, /2 D EXP 44 Twin $15, /4 D EXP 62 Plus $11, /2 D EXP 63 $17, D Drytac Corp. - Richmond, VA - JM63Pro $11, T Eastsign International Ltd. - Hong Kong - BU-1400RFZY $5, T BU-1600RFZY $6, T BU-1700RFZY $6, T BU-1600ZD $9, D GBC - Lincolnshire, IL - Max Speed (Linear fpm) SPIRE I 44T $6, / Silicone rollers, thermal and PSA, mount and laminate Foot pedal control, top/bottom supply shafts, nip pressure indicator, heated top roller up to 248 F, roll to roll capable Foot pedal, film and media rewind, roll-to-roll, electronic lift mechanism Dual heat, pull roller, foot pedal, electronic lift mechanism, roll-to-roll Foot pedal, auto-grip and multi-core shaft SPIRE III 44T $8, Extended feed & output tables, foot SPIRE III 64T $10, pedal, chill idler roller, auto-grip and multi-core shaft, optional rewind/ unwind shafts w/feed table idler SPIRE IV 64T $17, bars, optional side slitters and rear cut-off. SPIRE IV 64T is bi-directional Catena 35 $1, /16 5 D Catena 65 $3, /16 5 D Catena 105 $7, /16 5 D Heated Roller (Top, Bottom, Dual) Max Temp ( Fahrenheit) Pull Rollers? Rear cut-off SIGN & DIGITAL GRAPHICS June
5 DIGITAL PRINTING AND FINISHING DIGITAL GRAPHICS THERMAL AND HEAT-ASSIST LAMINATORS (cont.) GBC (Continued) - Lincolnshire, IL - Heated Roller (Top, Bottom, Dual) Max Speed (Linear fpm) Max Temp ( Fahrenheit) Titan 1244WF $9, /2 10 D Titan 1264WF $13, /2 10 D WF-1 $19, D WFt $25, D WF-1 $27, D WF-1 $34, D Pull Rollers? Foot pedal, rear cut-off Bi-directional, foot pedal control, slitters, AECS Foot pedal control, dynamic brake, cutter Bi-directional, foot pedal control, slitters, AECS Pneumatic main/pull rollers, bi-directional, foot pedal control, slitters, AECS Discovery 80 $5, /16 18 D Heat shoe, optional auto cutter 5031TS $16, /16 35 D Hand-fed with auto cut, side slitters, heat shoes/rollers 5031TS System $38, /16 35 D Auto feeder, slitter & cutter, scrap rewind, heat shoes/rollers 620os-1 $25, pt. 45 T Auto separator, semi-auto feeder 620os-1 w/feeder $31, pt. 45 T Auto feeder/separator, side slitter LEDCO Inc. (Div. of Graphic Laminating) - Hemlock, NY - Educator $1, /8 5 HS Preset pressure/speed Professor 27 $4, /16 10 D Dual hot roll Premier 4 $3, /8 10 HS Digital display Compass 27 $2, /8 15 D Auto shut-off, supply roll monitor XL44 $5, P Pouch/mounting laminator, 110v H20 $11, /2 10 D Dual hot roll HD-25 $11, /2 25 HS Built-in retractable slitters High Speed 30 $19, /2 65 HS Intelligent heat controls HD-38 $30, /2 35 HS HD-60 $37, /2 35 HS Adustable pressure D-42 $17, /2 30 HS Independant temperature controls HRD-44 $18, /2 27 D Dual hot roll D-60 $20, /2 20 HS Mount & laminate 38 June 2013 SIGN & DIGITAL GRAPHICS
6 THERMAL AND HEAT-ASSIST LAMINATORS (cont.) Heated Roller (Top, Bottom, Dual) Max Speed (Linear fpm) Max Temp ( Fahrenheit) Pull Rollers? Neschen Americas - Elkridge, MD - SEAL 44 Ultra PLUS $9, /2 5 D V, 16A, auto release liner takeup SEAL 44 Ultra S PLUS $7, /2 5 T SEAL 62 Ultra PLUS $10, /2 5 D Auto release liner takeup SEAL 62 Ultra S PLUS $9, /2 5 T SEAL 62 Pro D $23, D SEAL 62 Pro S $18, T SEAL 65 Pro MD $34, D SEAL 80 Pro $32, D Auto grip shafts, flip-up infeed table, opt. in-feed table, slitter & fan banks Auto grip shafts, flip up infeed table, optional productivity in-feed table Bi-directional, Easy Operator Interface (touch-screen control panel) Auto grip shafts, flip up infeed table, slitters, roll to roll capable JetMounter Roll-to-Roll Laminators. Eliminates Wrinkles for Your Graphics,Wrinkles for You. JM55 Fuzion JM63 Pro JM63 SHA-HA The JetMounter Series Drytac s line of wide-format roller laminators takes the worry out of laminating. Wrinkle-free, drift-free, roll-to-roll capability is now yours at a price you didn t think possible. Watch: Call: Use Info # 92 Features: Large diameter silicone rollers All-metal gears with chain drive 1 to 2 nip opening Top and bottom supply shafts s with heat-assist and heated rollers SIGN & DIGITAL GRAPHICS June
7 DIGITAL PRINTING AND FINISHING DIGITAL GRAPHICS THERMAL AND HEAT-ASSIST LAMINATORS (cont.) Rolinx - Irving, TX - Heated Roller (Top, Bottom, Dual) Max Speed (Linear fpm) Max Temp ( Fahrenheit) Atlantic 1650 $20, D Pull Rollers? Dual heated roller 285 F, self-calibrating rollers, flip-up infeed tables, self-adjusting take up, more Mistral 1650 $11, T Heat assist top roller 140 F.selfcalibrating rollers., flip-up infeed Mistral 2100 $16, T tables, 5 auto-grip shafts, pressure sensitive encapsulation, more Arkane 1650 $12, T Royal Sovereign Intl. - Rockleigh, NJ - RSH-1651 $10, /8 9.8 D RSH-1151 $9, /8 9.8 D RSH-1050 $8, /8 9.8 D Heated top roller 285 F, self-calibrating rollers, flip-up infeed table, 5 auto grip shafts, more Front & rear controls, auto-grip shafts, 9 pre-sets, thermal & PSA RSS-1050N $7, / D Hot Shoe technology, slitter RSL-2702 $3, / D Auto-grip shafts, 9 pre-sets, thermal & PSA RSL-2701S $2, mm 7.8 D Thermal encapsulator Supply55 Inc. - Ann Arbor, MI - Guardian 55-LM- 1650HA01 $6, T USTech - Orlando, FL - WORF HD-6000 $11, D WORF HD-5000 $8, D WORF HD-4000 $7, D WORF HS-6000 $5, T WORF HS-5000 $4, T WORF HS-4000 $4, T Foot pedal control, idler bars, forward/reverse, all steel construction, drop in mandrels, optional take-up system 5 rollers, foot pedal, auto grip shafts, auto release takeup, roll to roll, 5-shaft system Foot pedal, forward reverse, auto grip shafts, roll to roll, auto rel takeup, 5-shaft system 40 June 2013 SIGN & DIGITAL GRAPHICS
8 LIQUID LAMINATORS Max Coating Thickness (Microns) Daige Inc. - Albertson, NY - EZ Glide 48 $ W Air 6 Coating Type (Water, UV, Solvent) Output per Gallon (#7 Meyer Bar) Drying Method (Air, UV, IR) Output Speed (at 32 microns) EZ Glide 55 $ W Air 6 EZ glide is a non-electric applicator EZ Glide 62 $ W Air 6 Drytac Corp. - Richmond, VA - SmartCoater 1.6 call W 9 IR 12 6 Truspeed speed compensation with variable control, filtered supply/return, dual SmartCoater 2.2 call W 9 IR 12 6 stage heater SmartCoater 3.2 call W 6 Air 12 6 Half/full dryer option, auto speed control, dual supply tanks, filtered supply/return VersaCoater DocuMate Plus call UV 25 UV 12 6 Semi-automatic cleaning cycle, multiple supply tanks, proprietary light reflector, VersaCoater DocuMate Plus call UV 25 UV 12 6 pre-coat IR station, optional feeder/jogger VersaCoater PhotoMate 17 call UV UV 12 6 Engraved, textured roller system, 1/2 nip, semi automatic cleaning cycle, mulitple VersaCoater PhotoMate 24 call UV UV 12 6 supply tanks and optional feeder/jogger Eastsign International Ltd. - Hong Kong - BU-1600WL $7, W/S IR 12 BU-2200WL $8, W/S IR 12 BU-3300WL $18, W/S IR 12 Specialized design for roll-to-roll coating of banner, adjustable speed Marabu North America - Charleston, SC - StarLam 1600R $10, W IR 12 6 Roll-to-roll, adjustable speed, multiple Meyer rods, built-in cleaning system Buerkle LFC 2100 Roller Coater call UV UV 12 6 Rapid set-up, automatic height and coating thickness adjustment Neschen Americas - Elkridge, MD - Accu-18XE $5, x24 5 W Air 12 6 variable speed (5-20 feet per min) Optima International - Denver, CO - RCS 5600 $3, /4 W/ Eco Air RCS 6700 $29, /4 W/ Eco Air Multiple Optima 100-year liquid laminates available RCS 3M 120 $45, /4 W/ Eco Air SDG SIGN & DIGITAL GRAPHICS June
Graphic Finishing Partners P.O. Box 1097 Maryland Heights, MO Dealer
Graphic Finishing Partners P.O. Box 1097 Maryland Heights, MO 63043 1 800 986 2005 Dealer Gfp MACHINE OVERVIEW WIDE FORMAT LAMINATORS RUGGED DESIGN PROFESSIONAL QUALITY PROVEN PREFORMANCE ECONOMICALLY
More information2015 Product Line-Up
2015 Product Line-Up EXCLUSIVE PRODUCT ADVANTAGES Crowned Roller for Accuracy Top Heat Assist Swing Up Feed Table 110V Operation Swing Out Loading Shaft (563) Non-Marking Rubber Wheels 1 Year Parts & Labor
More informationEAGLE 35, 65,105 Parts List
EAGLE 35, 65,105 Parts List GBC IS AN ACCO BRANDS COMPANY 8.0 PARTS LIST All parts in each illustration are keyed with an index number for reference to the respective part number, part name, and quantity
More informationOPERATING INSTRUCTIONS FINISHER 4300
OPERATING INSTRUCTIONS FINISHER 4300 Model No. BA-FS43 Banner American Products, Inc. Temecula, CA Table of Contents I. For Your Safety... 2 II. Electrical Safeguards... 2-3 III. Specifications... 3 IV.
More information(PL) IBICO
Operations Manual Part number Item description 601211111 3 in. Core bushing stopper pin 601230702 Inner tension plate 601230708 Tension block stopper 601230711 Outer tension disk 601230714 Inside tension
More information1 2 3a 3b THREADING CARD 9 10 ABC Office
1 2 3a 3b 4 5 6 7 8 9 10 THREADING CARD Important Safety instructions YOUR SAFETY AS WELL AS THE SAFETY OF OTHERS IS IMPORTANT TO GBC. IN THIS INSTRUCTION MANUAL AND ON THE PRODUCT ARE IMPORTANT SAFETY
More informationModern ManufacturingServices.LLC. Attachments And Auxiliary Equipment
Attachments And Auxiliary Equipment Proudly Manufactured in the USA Modern ManufacturingServices.LLC 640 East Main Street Palmyra NY 14522 Phone 585-289-4261 Fax 585-289-7909 Unwinds And Folding Systems
More informationJOB LOSSES BY STATE, State Industry US total AK AL AR AZ CA CO CT Agriculture, forestry, fisheries -15, ,
State US total AK AL AR AZ CA CO CT -15,597-35 -272-248 -232-3,163-132 -46-3,858-68 4-19 -291-303 -116-11 -3,318-9 -55-32 -73-314 -66-35 -554,750-194 -14,113-7,789-4,781-55,255-4,453-6,836-9,326-13 -190-282
More informationJetMounter JM63 Fuzion XD
JetMounter JM63 Fuzion XD The JM63 Fuzion XD is a heavy-duty, wide-format roller laminator with a heat assist top roller. Excellent for laminating vehicle wraps, creating window decals and mounting graphics
More informationPerformance Increase In Existing Slitter/Rewinders By Upgrading Controls
Performance Increase In Existing Slitter/Rewinders By Upgrading Controls Why upgrade an old slitter/rewinder? Over the years, product expectations have changed Thinner Substrates Roll Quality (density
More informationRoyal Sovereign RSS, RSR, and RSH Series Laminators
Royal Sovereign RSS, RSR, and RSH Series Laminators Instruction Manual Provided By http://www.mybinding.com http://www.mybindingblog.com 8. WARRANTY Royal Sovereign International warrants the equipment
More informationSlitter Rewinders.
TM Slitter Rewinders Dusenbery has set converting industry standards for quality, performance and productivity for over six decades. Our latest line of MasterSlit slitter rewinders continues this tradition
More informationOPERATORS MANUAL FOR AGL64i
OPERATORS MANUAL FOR AGL6i 80 Burton Blvd. DeForest WI 5353 Ph: 608-86-706 Fax: 608-86-0 E-mail: info@aglaminators.com Table of Contents Table of Contents Preface- General Description Chapter Installation
More informationWL350 COUNTER TOP DRAWING AND PARTS LIST
WL350 COUNTER TOP DRAWING AND PARTS LIST Wetted Parts Yellow = Consumables Green = Recommended spare parts WL350 Manual Page 26 Revision 11 1 2018 WLCP Part Description Factory PN Stocked? Consumables
More informationCOLD-MOUNT LAMINATOR SERIES. OPERATORS MANUAL Models: JM18, JM26, JM34, JM44, JM44 SHA, JM54, JM54SHA. Manual Version
COLD-MOUNT LAMINATOR SERIES OPERATORS MANUAL Models: JM18, JM26, JM34, JM44, JM44 SHA, JM54, JM54SHA Manual Version 13-08-10 Copyright 2006 Drytac Corporation / Revised 2008 Drytac Corporation All rights
More informationOPERATORS MANUAL FOR AGL6400
OPERATORS MANUAL FOR AGL600 80 Burton Blvd. DeForest WI 5353 Ph: 608-86-706 Fax: 608-86-0 E-mail: info@aglaminators.com Table of Contents Table of Contents Preface- General Description Chapter Installation
More informationFALCON 60 Parts List
FALCON 60 Parts List GBC IS AN ACCO BRANDS COMPANY FALCON 60 Parts List GBC IS AN ACCO BRANDS COMPANY 1994 HCS, Inc. 800-748-0241 Reorder No. 1012-PT 1994 HCS, Inc. 800-748-0241
More informationFMJ-1400-WA FMJ-1600-WA
1 / 28 Ving Brand Full-auto Wide Format Cold Laminator, with Heat Assisted User s Manual FMJ-1400-WA FMJ-1600-WA 2 / 28 5. USAGE OF MACHINE...17 6. Laminating process... 21 6.1 Lamination Principles...
More informationNISSAN GROUP. More than 34 Years of Manufacturing in America IS INVESTING IN AMERICA FUTURE IN AMERICA JOBS IN AMERICA SOURCED IN AMERICA
NISSAN GROUP IS INVESTING U.S. SALES GROWTH In 2017, Nissan Group set an all-time U.S. record in 2017 with total sales of 1,593,464 units, up 2 percent over the prior year. Nissan continues to grow sales
More informationWL350 TOWER LAYOUT DRAWING AND PARTS LIST
WL350 TOWER LAYOUT DRAWING AND PARTS LIST Yellow = Consumables Green = Recommended spare parts Wetted Parts WL350 Manual Page 33 Revision 11 1 2018 WL350 TOWER LAYOUT DRAWING AND PARTS LIST WLCP Part.
More informationWL250 COUNTER TOP DRAWING AND PARTS LIST
WL250 COUNTER TOP DRAWING AND PARTS LIST Yellow = Consumables Green = Recommended spare parts WL250 Manual Page 21 Revision: 10 29 2018 Consumables WLCP Part. Description Part Stocked? 1 12 2350 4W Lamp
More informationAstroJet TM 5000 SHUTTLE HEAD PRINTER
AstroJet TM 5000 SHUTTLE HEAD PRINTER PARTS MANUAL ASTRO MACHINE CORP. 630 Lively Blvd. Elk Grove Village, IL 60007 Phone: (847) 364-6363 Fax: (847) 364-9898 www.astromachine.com This manual is intended
More informationPlease read this manual carefully before operating! Unpacking, assembly, and operating videos are available at
OPERATING MANUAL Gfp 563TH Please read this manual carefully before operating! Unpacking, assembly, and operating videos are available at www.gfpsmoothstart.com 1 Table of Contents Contents Page 1. Introduction
More informationWL350 TOWER LAYOUT DRAWING AND PARTS LIST
WL350 TOWER LAYOUT DRAWING AND PARTS LIST Yellow = Consumables Green = Recommended spare parts Wetted Parts WL350 Manual Page 34 Revision 11 21 2018 WL350 TOWER LAYOUT DRAWING AND PARTS LIST WLCP Part.
More informationManufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment
Manufactured in the U.S.A. HVAC Rollforming and Sheet Metal Equipment Where superior duct work begins. The Vicon line of HVAC Rollforming and Sheet Metal Equipment is the industry proven solution for all
More informationOPERATORS MANUAL FOR Encore DHR
OPERATORS MANUAL FOR Encore DHR 80 Burton Blvd. DeForest WI 5353 Ph: 608-86-706 Fax: 608-86-0 E-mail: info@aglaminators.com Table of Contents Table of Contents Chapter Installation Selecting Area - - -
More informationU.S. PRODUCTION GROWTH
U.S. PRODUCTION GROWTH U.S. Production has increased by more than 78 percent since 2011, as Nissan Group continues to localize core-model production. Nissan built a record number of vehicles in the U.S.
More informationPlease read this manual carefully before operating! Unpacking, assembly, and operating videos are available at
OPERATING MANUAL Gfp 563TH Please read this manual carefully before operating! Unpacking, assembly, and operating videos are available at www.gfpsmoothstart.com 1 Table of Contents Contents Page 1. Introduction
More informationCUSTOMIZED MODULAR ROLL STANDS
CUSTOMIZED MODULAR ROLL STANDS SOLUTION SERIES Complete, pre-configured solutions for custom modular roll stands, nip / pull roll stations and slitting stations retrofitted for existing machines or as
More informationWL250 TOWER DRAWING AND PARTS LIST
WL250 TOWER DRAWING AND PARTS LIST Yellow = Consumables Green = Recommended spare parts WL250 Manual Page 27 Revision: 4 3 2018 No WLCP Part No. Consumables Description Part No Cold Only Hot & Cold Stocked?
More informationFY 2002 AWA INSPECTIONS
FY 22 AWA INSPECTIONS number of Number of inspections Number of inspections facilities and (sites) category category Inspections for Compliance Other Types of Inspections Dealers 3,893 4,846 Prelicensing
More informationDesigned to perform and built to last.
Designed to perform and built to last. EASYMOUNT WIDE FORMAT SYSTEMS Car Wraps Roll-Up Banners Window Graphics Board Mounts Signs Bike Wraps Pop-Up & Exhibition Graphics Works with BOSS Film RELIABILITY
More informationApplication Techniques for Reflective Pressure-Sensitive Films
Introduction Before starting application consult the appropriate product data bulletin for information regarding minimum and maximum application temperatures, recommended substrates, and immediate service
More informationDELTA MOD-TECH ROTARY CONVERTER. Maintenance Manual. Delta Mod-Tech Rotary Converting Equipment JOB BILL OF MATERIALS LISTING. Job Bill of Materials
DELTA MOD-TECH ROTARY CONVERTER Job Bill of Materials Delta Mod-Tech Rotary Converting Equipment Maintenance Manual JOB BILL OF MATERIALS LISTING Delta Industrial Services, Inc. Innovative Engineered Solutions
More informationDesigned to perform and built to last.
Designed to perform and built to last. EASYMOUNT WIDE FORMAT SYSTEMS Car Wraps Roll-Up Banners Window Graphics Board Mounts Signs Bike Wraps Pop-Up & Exhibition Graphics Works with BOSS Film RELIABILITY
More informationby William Gilbert, Industry Business Development Manager, Converting and Cranes, Motion Control Solutions
Date: April 23,2010 THE CASE FOR REGENERATIVE AC DRIVE MOTORS A practical alternative to mechanical braking and non-regen drives systems in the converting, packaging, wireforming and printing industries
More informationMOHAWK DIGITAL WIDE FORMAT
MOHAWK DIGITAL WIDE FORMAT WIDE FORMAT PRODUCT CATALOG SPRING 2018 Visit mohawkconnects.com for complete stocking info. 2 MOHAWKCONNECTS.COM MOHAWK WIDE FORMAT Known for quality and performance in traditional
More informationDesigned to perform and built to last.
Designed to perform and built to last. EASYMOUNT WIDE FORMAT SYSTEMS Car Wraps Roll-Up Banners Window Graphics Board Mounts Signs Bike Wraps Pop-Up & Trade ShowGraphics Graphics Exhibition Works with BOSS
More informationNational Routing Number Administration p-ani Activity and Projected Exhaust Report
National Routing Number Administration 2016 p-ani Activity and Projected Exhaust Report The ATIS Industry Numbering Committee developed the P-ANI Administration Guidelines, which contain the following
More informationWL250 TOWER DRAWING AND PARTS LIST
WL250 TOWER DRAWING AND PARTS LIST Yellow = Consumables Green = Recommended spare parts WL250 Manual Page 29 Revision: 10 29 2018 No WLCP Part No. Consumables Description Part No Cold Only Hot & Cold Stocked?
More informationSingle Hot (SH) Parts Price Lists and Guides
Single Hot (SH) Parts Price Lists and Guides Vivid Laminating Technologies Ltd. Technical Service Department Parts Price List EASYMOUNT RANGE (SH) Machine Part Supplier Part Number EM1600SH Mandrel Support
More informationDesigned to perform and built to last. EASYMOUNT WIDE FORMAT SYSTEMS
Designed to perform and built to last. EASYMOUNT WIDE FORMAT SYSTEMS RELIABILITY SPEED DESIGN EASE INNOVATION QUALITY SUPPORT PERFORMANCE Easymount laminators are designed to perform and built to last.
More informationSuction Pads for Plastic Films and Paper
for Plastic Films and Paper Flat SGN 25 K to SGN 40 K Suction area (Ø) from 25 mm to 40 mm Suitability for Industry-Specific Applications Applications Round, flat suction pad for handling of paper, plastic
More informationWL500 DRAWINGS and PARTS LIST. Yellow = Consumables Green = Recommended spare parts
WL500 DRAWINGS and PARTS LIST Yellow = Consumables Green = Recommended spare parts WL500 Manual Page 28 Revision 1-30-2018 WETTED PARTS Yellow = Consumables Green = Recommended spare parts WL500 Manual
More informationCHEMINSTRUMENTS HOT ROLL LAMINATOR MODEL HL-100, HL-101 OPERATING INSTRUCTIONS
CHEMINSTRUMENTS HOT ROLL LAMINATOR MODEL HL-100, HL-101 OPERATING INSTRUCTIONS PRODUCT DESCRIPTION...2 SPECIFICATIONS...3 UNPACKING...3 ASSEMBLY...3 Key Components...5 SAFETY FEATURES...7 Trip Wire...7
More informationWL500 DRAWINGS and PARTS LIST. Yellow = Consumables Green = Recommended spare parts
WL500 DRAWINGS and PARTS LIST Yellow = Consumables Green = Recommended spare parts WL500 Manual Page 28 Revision 10 15 2018 WETTED PARTS Yellow = Consumables Green = Recommended spare parts WL500 Manual
More informationReach-Ins & Pass-Thrus REFRIGERATORS & FREEZERS INNOVATIVE DESIGNS FOR YOUR FOODSERVICE NEEDS
Reach-Ins & Pass-Thrus REFRIGERATORS & FREEZERS INNOVATIVE DESIGNS FOR YOUR FOODSERVICE NEEDS Reach-Ins & Pass-Thrus Refrigerators & Freezers Our Reach-In Refrigerators and Freezers are designed for performance
More informationSERVO WICKETERS. Available in 800 & 1000 mm widths
e offer Wicketers that are practically high-speed and easy to operate. We have designed it for optimal output and price combination. With speed options of 380 cycles/minute (known as Vega Plus series)
More informationMOHAWK DIGITAL WIDE FORMAT
MOHAWK DIGITAL WIDE FORMAT WIDE FORMAT PRODUCT CATALOG FALL 2018 Visit mohawkconnects.com for complete stocking info. MOHAWK WIDE FORMAT Known for quality and performance in traditional offset and digital
More informationTABLE OF CONTENTS BALANCING EQUIPMENT... VIBRATION ANALYSIS... CORE LOSS TESTERS... SAND BLASTING EQUIPMENT... DRY ICE BLASTING EQUIPMENT... WINDING M
TABLE OF CONTENTS BALANCING EQUIPMENT... VIBRATION ANALYSIS... CORE LOSS TESTERS... SAND BLASTING EQUIPMENT... DRY ICE BLASTING EQUIPMENT... WINDING MACHINES/HEADS... WIRE RACK SCALE... CUT-OFF SAWS...
More informationAstroJet TM M1DX Color Duplex Printer
AstroJet TM MDX Color Duplex Printer Parts Manual ASTRO MACHINE CORP. 630 Lively Blvd. Elk Grove Village, IL 60007 Phone: (847) 364-6363 Fax: (847) 364-9898 www.astromachine.com This manual is intended
More informationLaserJet 1300 series printer
Electronic Accessories Cable (Interface) HP Parts Reference Guide 8120-8485 Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector, 1.8m (6.0 ft) long 8121-0712 Universal
More informationC6502A HP IEEE 1284 parallel printer port module - Plugs into the LIO module slot - Comes standard with the LaserJet 1300 series printers
Electronic Accessories Cable (Interface) 8120-8485 Universal Serial Bus (USB) interface cable - Type 'A' connector to type 'B' connector, 1.8m (6.0 ft) long 8121-0712 Universal serial bus (USB) interface
More informationencoreequipment.com 2 FEATURES STANDARD
2 017-2018 Articulating midcut deck PTO drive shaft system Dual pumps and wheel motors Long life, maintenance-free spindles Get power and versatility with the true, floating deck on a mid-mount rider.
More informationDavis-Standard Is More Than Equipment
Davis-Standard Is More Than Equipment Davis-Standard is recognized globally as the leader in high-performance extruders. But our capabilities go far beyond our equipment. They extend to our professional
More informationMAGPOWR TENSION CONTROL SOLUTIONS MAGPOWR TENSION CONTROL SOLUTIONS. Advanced Web Tension and Torque Control Technologies
MAGPOWR TENSION CONTROL SOLUTIONS MAGPOWR TENSION CONTROL SOLUTIONS Advanced Web Tension and Control Technologies INTRODUCTION 1 High quality and efficiency are the goals of every web production line,
More informationDCP. STOCK DIE-CUT MASKING PRODUCTS For The Electronics Industry.
DCP STOCK DIE-CUT MASKING PRODUCTS For The Electronics Industry www.identco.com IDENTCO partners with industrial, transportation, and electronics customers across the globe to develop high performance
More informationBNA-42MSY2. Fixed Headstock Type Automatic CNC Lathe BNA
BNA-42MSY2 Fixed Headstock Type Automatic CNC Lathe BNA BNA- 42MSY2 Configured with two spindles and one turret and equipped with a Y axis and X2 axis, the BNA-42MSY2 is able to handle complex machining,
More informationCenters. power and. accuracy. 12/16 KW 24 tools Double arm. High quality surface finishing. to 12,000 rpm. tools ATC Magazine
BARON-MA AX VL Range Vertical Machining Centers Linear Guide ways VL Rangee Powerful Machines, Simple User Friendly Programming Att a Very Affordable Pricing Cost Effective, High Performance Vertical Machining
More information5- Roll Coating Method
State of the Art Coating Technologies 5- Roll Coating Method by POLYTYPE CONVERTING Author - Gunter Roesler Contents 1. The Polytype Group- overview 2. Multi-Roll Coating Technology in High Speed Coating
More informationDLF-220L Digital Label Finishing System
USER MANUAL DLF-220L Digital Label Finishing System this product is certified: IMPORTANT: Please keep the original packaging in case of return. If we receive the system in non-original packaging, the warranty
More informationWinding technology, pneumatically actuated tension brakes web tension open-loop and feedback control systems
Winding technology, pneumatically actuated tension brakes web tension open-loop and feedback control systems Ortlinghaus Plates. Clutches. Brakes. Systems. 왎 Winding technology - pneumatically actuated
More informationSlitters - Coaters - Accumulators - Winders.
Slitters - Coaters - Accumulators - Winders www.ptiextruders.com Table of Contents Slitters...4 Coaters...6 Accumulators...8 Winders Cantilevered... 10 Winders A-Frame... 12 Quick & Easy Operations...
More informationTIP TIG HOTWIRE 18 SUPER COOL TORCH. Materials: Steel/Stainless/Aluminum Duty Cycle 400A / 100% INTERNAL PARTS
TIP TIG HOTWIRE 18 SUPER COOL TORCH Materials: Steel/Stainless/Aluminum Duty Cycle 400A / 100% COMPLETE TORCH ASSEMBLY 10002461 TIP TIG 18 SC HW TORCH WITH ORANGE LINER (14FT) $995.00 ea. 10002465 TIP
More informationEMS-650 Parts Price Lists and Guides
EMS-650 Parts Price Lists and Guides Vivid Laminating Technologies Ltd. Technical Service Department Parts Price List EASYMOUNT EMS 650 Machine Part Supplier Part Number RRP EMS 650 Mandrel Tension Handle
More informationBest Diversified Products, Inc. Product Manual. BestReach Rigid Belt. Models BRB 230 OS BRB 230 SS BRB 460 OS BRB 460 SS
Best Diversified Products, Inc. Product Manual TM BestReach Rigid Belt Models BRB 230 OS BRB 230 SS BRB 460 OS BRB 460 SS Best Diversified Products Inc. 107 Flint Street Jonesboro, AR 72401 Phone 870-935-0970
More informationVERTICAL FORM FILL SEAL MACHINES
VERTICAL FORM FILL SEAL MACHINES AUTOMATIC PACKAGING MACHINES 2 Vertical Form, Fill and Seal machines AVM AVM vertical Form, Fill and Seal (VFFS) machines automatically form a bag from a flat roll of film,
More informationFR130DEL. 570A Telser Road Lake Zurich, IL USA "FR" MODEL SERIES
FOIL HOT STAMPING UNIT MANUAL FR130DEL 570A Telser Road Lake Zurich, IL 60047 USA IL HOT STAMPING UNIT * FOIL HOT STAMPING UNIT * FOIL HOT STAMPING UNIT * FOIL HOT STAMPIN "FR" "FR" MODEL SERIES 1 Corporate
More informationSuper Calendar. Heated rolls
Application Assistant Surface Winders are used to roll up material such as wire, paper, film, metals and textiles. The surface winding method applies the driving power to a fixed diameter roll or rolls,
More informationCNC Double Column Machining Center. SDV-H Series SDV Series.
CNC Double Column Machining Center www.sigmacnc.com.tw Special Patent Design Construction Features The Motion of Z-axis is Supported by 2 Linear Guideways The Motion of Z-axis is Supported by 4 Linear
More informationTARASH AFZAR ARIA exclusive dealer in Iran Tel: cell:
www.karmetal.us Karmetal was founded in 1975 for manufacturing special purpose machines. During 1980 s, Karmetal started to manufacture spare parts for automotive factories and Turkish military. In 1997
More informationDelivering innovative print finishing solutions & service. digicon series 3
Delivering innovative print finishing solutions & service digicon series 3 The next generation of digital finishing The Digicon Series 3 is the result of 17 years development and production of over 1,000
More informationU.S. Heat Pump Water Heater Market Transformation: Where We ve Been and Where to Go Next
U.S. Heat Pump Water Heater Market Transformation: Where We ve Been and Where to Go Next JOSH BUTZBAUGH LINDA SANDAHL MICHAEL BAECHLER SEPTEMBER 14, 2017 1 Agenda Agenda Background Technology Considerations
More informationInstructions for Operation of the Scotchlite Interstate Squeeze Roll Applicator
3 Instructions for Operation of the Scotchlite Interstate Squeeze Roll Applicator Using Pressure-Sensitive Adhesive-Coated 3M Scotchlite Reflective Sheeting Information Folder 1.4 March 1996 Replaces IF
More informationRead these instructions thoroughly before attempting to install this option.
Rewind Option Kit Installation Instructions This kit includes the parts and documentation necessary to install the Media Rewind option into the following printers: 0XiIIIPlus, 0 dpi 0XiIIIPlus, 00 dpi
More informationIntegrated temperature test and calibration bench Model CBS-SC4000
Calibration technology Integrated temperature test and calibration bench Model CBS-SC4000 WIKA data sheet CT 92.33 Applications Testing and calibration of temperature measuring instruments such as: - Mercury
More informationTAKE-A-LABEL Power Dr. Nunica, MI Phone: (616) Fax: (616)
OPERATIONS MANUAL MODEL TAL-3100T TAMP APPLICATOR TAKE-A-LABEL 16900 Power Dr. Nunica, MI 49448 Phone: (616) 837-9300 Fax: (616) 937-9301 http://www.take-a-label.com E-Mail sales@take-a-label.com Page
More informationSECONDARY PACKING BOX STRAPPING CARTON SEALERS
A Sevana Group Company l 3 Decades of Experience in Packaging l Multiple Country Operations + l 800 Channel Partners + l 60 Service Centres SEALING DRY INK CODING PRIMARY PACKING SECONDARY PACKING POST
More informationINSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000-5 FOR RYOBI 3302 / ITEK 3985 (2 COLOR) INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable,
More informationUP TO 5-YEAR WARRANTY! CALL TOLL FREE
Label Handling Innovations JUNE 2015 REWINDERS UNWINDERS DISPENSERS CHUCKS APPLICATORS REEL-TO-REEL PRINTER HANDLING PACKAGES: REWINDERS.. DISPENSERS. UNWINDERS... CHUCKS.. REEL-TO-REEL COUNTERS REEL-TO-REEL
More informationWireless Measurement of Winding Roll Pressure. Timothy Walker TJWalker + Associates Inc. Camilo Alladro - Tekscan Dan Weber- WebCut Converting
Wireless Measurement of Winding Roll Pressure Timothy Walker TJWalker + Associates Inc. Camilo Alladro - Tekscan Dan Weber- WebCut Converting 1 Why Wi-Fi Winding Pressure Measurement? Many years of winding
More informationIntegrated fully automated forming line for the production of Thermal Interface Materials (TIM)
Integrated fully automated forming line for the production of Thermal Interface Materials (TIM) YEDA LLC 1800 LONDON ROAD UNIT C1 CLEVELAND, OHIO 44112 USA www.yedaengineering.com Thermal Interface Materials
More informationinstruction ZCM 100 ZCM 200 START International 4270 Airborn Dr. Addison, TX 75001, USA Tel Fax
ZCM 100 START International 4270 Airborn Dr. Addison, TX 75001, USA Tel 972.248.1999 Fax 972.248.1991 TM instruction ZCM 200 TM info@startinternational.com www.startinternational.com 10/07 Part Number
More informationINSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000 INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable, and designed to provide many years
More informationFD 120 Card Cutter MAINTENANCE MANUAL. MyBinding.com 5500 NE Moore Court Hillsboro, OR Toll Free: Local: /2011
FD 120 Card Cutter 5/2011 MAINTENANCE MANUAL SAFETY PRECAUTIONS Always observe the cautions and warnings given below to prevent personal injury or property damage. The degree of danger and damage that
More informationASTRO AMC-2000 SERIES ENVELOPE FEEDER
ASTRO AMC-2000 SERIES ENVELOPE FEEDER PARTS CATALOG GROUP 1 Page 1 GROUP 1 1. 84-100-56B FRONT FRAME CLOSURE 1 25. 84-130-20 SKID WHEEL ASSEMBLY 1 2. 71-140-08 FRONT ENV. GUIDE ASSEMBLY, R/H 1 26. 123-0407
More informationINSTALLATION AND OPERATING INSTRUCTIONS
ASTRO ENVELOPE FEEDER AMC-2000 INSTALLATION AND OPERATING INSTRUCTIONS INTRODUCTION Thank you for purchasing the Astro Envelope Feeder. It is fast, efficient, reliable, and is designed to give you many
More informationFLAIL SHREDDERS BLADE TYPES: "L" - HAMMER BLADES OR "Y" - REGULAR FLAIL BLADES. Description. 814 lbs Call for Price
www.bertima.it FLAIL SHREDDERS This mulcher is well suited for any type of residue such as grass, pruning and branches in vineyards and orchards up to 8-10 cm in diameter. The mulcher consist of a rigid
More informationMitsubishi Motors EV Commitment. David N. Patterson, PE Chief Engineer Mitsubishi Motors North America
Mitsubishi Motors EV Commitment David N. Patterson, PE Chief Engineer Mitsubishi Motors North America Environmental Vision 2020 Vehicle-produced CO 2 Gasoline & Diesel Fuel Efficiency Improvement Increase
More informationMAGPOWR TENSION CONTROL SOLUTIONS MAGPOWR TENSION CONTROL SOLUTIONS. Advanced Web Tension and Torque Control Technologies
MAGPOWR TENSION CONTROL SOLUTIONS MAGPOWR TENSION CONTROL SOLUTIONS Advanced Web Tension and Control Technologies INTRODUCTION 1 High quality and efficiency are the goals of every web production line,
More informationTHINNER AND FASTER. Well, you better get busy if you re going to be here next year.
THINNER AND FASTER In today s global market we are all faced with shrinking profits and tougher competition. This is a whole new world with unheard of challenges. With the advent of the internet, we see
More informationThe Economic Downturn Lessons on the Correlation between Economic Growth and Energy
The Economic Downturn Lessons on the Correlation between Economic Growth and Energy Demand presented to Indiana State Bar Association Utility Law Spring Seminar April 9, 2010 presented by Doug Gotham State
More informationinstructions ZCM ZCM START International 4270 Airborn Dr. Addison, TX 75001, USA Tel Fax
ZCM 1000 START International 4270 Airborn Dr. Addison, TX 75001, USA Tel 972.248.1999 Fax 972.248.1991 TM START Japan Corporation 1-26-14 Toshin-Cho Itabashi-ku Tokyo, Japan Tel 81.3.3554.5608 instructions
More informationPANASONIC Models: MC-9410, MC-9420, MC-9430, MC-9440
Dust Cover and Attachments A1... P-12429... Indicator Plate, 9410 A1... P-12430... Indicator Plate, 9420 A1... P-12431... Indicator Plate, 9430 A1... P-12432... Indicator Plate, 9440 A2... P-12433... Indicator
More informationBAF Overview. Barry P. Carr Northeast Regional Sales Manager November 2012
BAF Overview Barry P. Carr Northeast Regional Sales Manager November 2012 Founded in 1992 by industry veterans is the leading provider of natural gas vehicle conversions in the United States More than
More informationWE CARRY THE FUTURE SM
WE CARRY THE FUTURE SM www.hmm21.com m.hmm21.com 877-7HYUNDAI August 30, 2012 To: HMM Valued Customers Re: Change in Dynamics in the US trades As an update to the Hyundai Merchant Marine Program, effective
More information1/2 Air Impact Wrench P/N IR 2235TiMAX-2 With 2 Anvil, Weighs Only 4.9 lbs ft.-lbs. torque. 3/4 Super Duty P/N IR 261
37 Order NLINE www.midwestwheel.com CATALOG NUMBER Ingersoll Rand Air Tools & Accessories 3/8 Air Impactool IR 2115TiMAX The best power-to-weight ratio in its class 300 ft.-lbs. torque Enhanced power settings
More information, NAS!?r-s~~if.{" WOQi2AN PIGS: FINAt:. EST'IHATES (STATISTICAL,,,", BULLETIN.) NATIONAL ' AGRICULTURAL STATISTICS SERVICE,, ':-'-"'-'-,,
, NAS!?r-s~~if.{" WOQi2AN PIGS: FINAt:. EST'IHATES 1988-92. (STATISTICAL,,,", BULLETIN.) NATIONAL ' AGRICULTURAL STATISTICS SERVICE,, ':-'-"'-'-,, WASHINGTOH, DC. DEC 9 57P' ~ alii Association for Informat
More informationQuickie QX December 2018
Quickie QX December 2018 EIF6 Mark For: Submitting for: Quote Order Date: PO#: Dealer Acct #: Dealer: ADDITIONAL SHIPPING INFORMATION Dealer Contact: Ship To: Dealer Address: Attention: Dealer City: PV:
More informationAt125 Kopa Anti tamper ip65 reflector
AT125 At125 Kopa Anti tamper ip65 reflector MULTI WATT LED (7-18W) General 7/10/13/18W options IP65 rated from below CRI >80 (3000k, 4000k) 3 SDCM colour consistency Rated life 50,000 hours Reflector beam
More information