Graphic Finishing Partners P.O. Box 1097 Maryland Heights, MO Dealer

Transcription

1 Graphic Finishing Partners P.O. Box 1097 Maryland Heights, MO Dealer

2 Gfp MACHINE OVERVIEW WIDE FORMAT LAMINATORS RUGGED DESIGN PROFESSIONAL QUALITY PROVEN PREFORMANCE ECONOMICALLY PRICED 865-DH DH TH TH 355-TH 255-C 230-C Heat / Cold Dual Heat Top Heat Assist Top Heat Assist Top Heat Assist Cold Cold Laminating Width 65" 47" 63" 63" 55" 55" 30" Maximum Speed (feet/minute) Speed Control Variable Variable Variable Variable Variable Variable Variable Maximum Temperature 266 F 266 F 122 F 122 F 122 F - - Heating Method Quartz Tube Quartz Tube Metal Alloy Metal Alloy Metal Alloy - - Mounting Gap 1" 1" 1" 1" 1" 1" 1/2" Pressure/Gap Adjustment Infinite Infinite Infinite Infinite Infinite Infinite Infinite Pressure/Gap Mechanism Hand Wheel Hand Wheel Hand Wheel Hand Wheel Hand Wheel Hand Wheel Hand Wheel Roller Diameter 5.25" 5.25" 4.5" 4.5" 4.5" 4.5" 2.5" Main Rollers Silicone Silicone Silicone Rubber Rubber Rubber Silicone Supply Shaft Swing Out with Quick Grip Swing Out with Quick Grip Quick-Grip Quick-Grip Removable Removable Tension Adjustment Single knob Single knob Single knob Single knob Single knob Single knob Dual brakes Web Clutch Motorized Liner & Rewind Chain Link Chain Link Chain Link Roll to Roll Capable - - Rear Rewind Optional Optional Optional Standard Standard - - Front Rewind - - Optional Front Unwind 2 2 Foot Pedal Optical Safety Eyes Stand Swing Up Feed Table Fixed Power Supply 220v 22A 220v 22A 120v 13A 120v 13A 120v 12A 120v 0.4A 120v 0.3A Power Consumption 5700W 4400W 1400W 1400W 1300 W 38W 30W Warranty Parts 1 year 1 year 1 year 1 year 1 year 1 year 1 year Warranty Labor 1 year 1 year 1 year 1 year 1 year 1 year 1 year Installation & Training Optional Optional Optional Optional Optional Net Weight (LBS.) Dimensions 87 x 34 x 49" 69 X 34 X 49" 82 x 29 x 50" 82 x 23 x 48" 72" x 23" x 48" 73 x 24 x 55" 43 x 17 x 42" Safety Approval ctuvus ctuvus ctuvus ctuvus ctuvus ctuvus ctuvus Rev

3 Gfp 800 Series Professional Dual Heat Laminators Our most flexible, cost-effective laminator yet. For finishing professionals who need versatility, quality, and economy in one machine, the Gfp 800 Series delivers. Turn out thermal encapsulation with low melt films (1.5-10mil), PSA lamination, and mounting jobs quickly and easily. Operators will spend less time on set-ups and changeovers thanks to swing out supply shafts and film rolls up to 10 in diameter. Two front rewind shafts allow thermal encapsulation of prints from a roll. Versatile productivity for the bottom line That s the Gfp difference. aroller diameter 5 a Independent top/bottom heaters a Web clutch adjustment a 2 Front unwind shafts a 2 Swing-out supply shafts a 1 Aluminum take-up mandrel a Swing up feed table a Motorized rear rewind option a Variable roller gap to 1 a Photoelectric eye for safety a Silicone rollers a Removable print pressure plate a 3 Core film chucks a Machine stand with casters a 36 table height output a ctuvus Safety approved The Profitable Source for Finishing Products Graphic Finishing Partners LLC P.O. Box 1097 Maryland Heights, MO

4 Choose a Gfp Professional Dual Heat Laminator for Mounting Laminating Encapsulating Motorized rear rewind for roll-to-roll applications Two front unwind shafts for roll-to-roll encapsulation. Front and rear Swing-out Film Shafts Applications Signs Banners Trade show displays Point-of-purchase Dry-erase boards Floor graphics Graphic mounting Photo mounting Window graphics Vehicle graphics Specifications Laminating Width Roller diameter Roller gap Supply roll diameter Rear rewind Max temperature Film thickness Laminating speed Drive motor Pressure adjustment Roller heating Power supply 847DH Max 8 OD Optional 266º F mil 0-13 ft/min DC geared motor Dual hand wheels Dual (Top/Bottom) 220v 60Hz Single phase/19 amps Max 4400W 601 lbs. Power consumption Net weight with stand Dimensions 69 x 34 x 49 Installation Warranty 1 year parts and labor 865DH Max 8 OD Optional 266º F mil 0-13 ft/min DC geared motor Dual hand wheels Dual (Top/Bottom) 220v 60Hz Single phase/24 amps Max 5700W 767 lbs 87 x 34 x 49 1 year parts and labor The Profitable Source for Finishing Products Graphic Finishing Partners LLC P.O. Box 1097 Maryland Heights, MO REV

5 Maximum Productivity 563TH-2 MaxPro Top Heat Laminator The fastest way to profitability for Pressure-Sensitive applications. What s the best way to make your production even better? Shorten film loading time? Make fewer film changes? Increase throughput speed? Increase bi-directional flexibility? Yes. And that s exactly what we did to create our most productive 63 laminator. The Gfp 563TH-2 MAXPRO delivers 50% faster throughput and quick application changes to save you time, effort and money on applications that require overlamination, mounting or the pre-coating of boards. Roller diameter 4.5 Dual tension control Speed and temperature controls Foot pedal 2 Swing-out film shafts 1 Aluminum take-up mandrel Swing-up feed table Motorized rear rewind option Removable in-feed pressure roller Metal Alloy Heater Variable roller gap to 1" Photoelectric eye for safety Front unwind basket 3 Aluminum Quick-Grip shafts Machine stand with casters 38 table height output 120 volt service ctuvus Safety approved The Profitable Source for Finishing Products Graphic Finishing Partners LLC P.O. Box 1097 Maryland Heights, MO

6 Overlamination Mounting Board pre-coating The 563THMAXPRO will boost productivity by over 50%. Simple speed and temperature controls Motorized rear rewind for roll-to-roll applications Swing-out and Quick-Grip Film Shafts on both sides make loading easy for operators. Fewer film changes with 300 rolls. Applications Signs Banners Trade show displays Point-of-purchase displays Dry-erase boards Floor graphics Graphic mounting Photo mounting Window graphics Vehicle graphics Specifications Laminating Width Roller diameter Roller gap Rear rewind Max temperature Laminating speed Pressure adjustment Heat method Max. roll diameter Power supply Power consumption Net weight w/ stand Dimensions Machine Shipping Stand Shipping 563TH-2 MAXPRO Optional 140º F 0-20 ft/min Hand wheel Metal Alloy 8 OD (top) 16" (bottom) 120v 13 amp 1400 W 502 lbs 82 x 28.5 x lbs; 89.4 x 33.1 x lbs; 75 x 33 x 5.8 The Profitable Source for Finishing Products Graphic Finishing Partners LLC P.O. Box 1097 Maryland Heights, MO REV

7 Gfp 300 Series Top Heat Laminators Fully featured, professional quality, affordably priced. Sign shops and digital printers now have an affordable option for pressure-sensitive applications. The Gfp 300 Series laminators deliver labor-saving features, rugged construction and high quality output in an entry level machine. Building off of the 255C Cold Laminator, the 300 Series adds top heat for better overlamination, mounting and board coating results. To make production easier and more efficient, they feature new 3 aluminum tube Quick-grip film shafts with width measurements for easy loading and alignment, Integrated Top Liner and Rear Output Rewinds for roll-to-roll applications, and new Metal Alloy Tubular Heaters to reduce breakage. Roller diameter " and 63" widths Speed and temperature controls Foot pedal 2 Unwind supply shafts Top and rear take-up mandrels Swing up feed table Integrated top liner rewind Integrated rear rewind Variable roller gap to 1 Metal Alloy heater 3 Aluminum Quick-Grip shafts Chain drive rewinds Single pressure adjustment Machine stand with casters 38" table height output 120 volt service ctuvus safety approved The Profitable Source for Finishing Products Graphic Finishing Partners LLC P.O. Box 1097 Maryland Heights, MO

8 Choose the 300 Series Top Heat Laminators for Overlamination Mounting Board pre-coating Overlamination Mounting Board pre-coating Aluminum Quick-grip shafts for easy loading and alignment Integrated rear rewind for roll-to-roll applications Applications Signs Banners Trade show displays Point-of-purchase displays Dry-erase boards Floor graphics Graphic mounting Photo mounting Window graphics Vehicle graphics Specifications Laminating Width Roller diameter Roller gap Rear rewind Max temperature Laminating speed Unwinds Liner rewind Pressure adjustment Tension adjustment Heat method Max. Roll diameter Power supply Power consumption Foot pedal Stand with casters Net weight w/ stand Dimensions Shipping weight machine Shipping dim. machine Safety agency approval 355TH º F 20 ft/min Top/Bottom Chain drive Hand wheel Single knob Metal Alloy 6 OD 120v 12a 1300 W 321 lbs 72 x 23.5 x lbs 79 x 26 x 31 ctuvus 363TH º F 20 ft/min Top/Bottom Chain drive Hand wheel Single knob Metal Alloy 6 OD 120v 13a 1400 W 387 lbs 82 x 23 x lbs 89 x 26 x 31 ctuvus The Profitable Source for Finishing Products Graphic Finishing Partners LLC P.O. Box 1097 Maryland Heights, MO REV

9 Gfp 200 Series Professional Cold Laminators Simple operation. High quality results. Affordably priced. Gfp 255C shown The Gfp 200 Series laminators are the affordable alternative to time-consuming hand finishing with rollers and squeegees. Now even the smallest shops can compete for bigger jobs with confidence. The Gfp 200 Series will shorten production time, increase profitability and produce consistently professional results by delivering essential features found on systems costing thousands more. Apply all types of PSA films, pre-mask tapes and adhesives. Mount prints on boards to 1 at production speeds. Easy set up and low maintenance makes the Gfp 200 series a hit with new users. Quality results will keep customers coming back. a Roller Diameter 2.5 and 4.5 a 2 Tension controls a Forward and reverse a Variable speed a Chain drive rewind a Foot pedal a 2 Unwind film shafts a 1 Liner rewind a Variable roller gap to 1 a 3 Aluminum Quick-Grip shafts a Single pressure adjustment a 3 Film core a 120 volt service a Machine stand with casters a 36 table height output a ctuvus Safety approved The Profitable Source for Finishing Products Graphic Finishing Partners LLC P.O. Box 1097 Maryland Heights, MO

10 Choose the 200 Series Professional Cold Laminator for Overlamination Mounting Board pre-coating Gfp 230C shown Applications Signs Posters Trade show displays POP displays Single side lamination Floor graphics Graphic mounting Photo mounting Colored vinyl Pre-mask Specifications Laminating width Roller diameter Roller gap Laminating speed Unwinds Liner rewind Pressure adjustment Tension adjustment Power supply Power consumption Foot pedal Stand with casters Net weight w/ stand Dimensions Shipping weight Shipping dimensions 230C / ft/min Top/Bottom Direct drive Single wheel Dual brakes 120v.3amp 30W 117 lbs 43 x 16.5 x lbs 49 x 21 x C ft/min Top/Bottom Chain drive Single wheel Single knob 120v.4amp 38W 287 lbs 72.8 x 24.5 x lbs 78 x 25 x 27 The Profitable Source for Finishing Products Graphic Finishing Partners LLC P.O. Box 1097 Maryland Heights, MO REV

11

12 EQUIPMENT WARRANTY January 2014 Graphic Finishing Partners, LLC warrants each new Gfp Laminator is free from defects in material and workmanship for a period of one (1) year from the date of installation. A machine which proves defective in materials or workmanship within the warranty period will be repaired or, at Gfp s option, replaced without charge. This warranty is extended only to the original purchaser. This warranty is the only warranty made by Gfp and cannot be modified or amended. Gfp s sole and exclusive liability and the customer s sole and exclusive remedy under this warranty shall be, at Gfp s option, to repair or replace any such defective part or product. These remedies are only available if Gfp s examination of the product discloses to Gfp s satisfaction that such defects actually exist and were not caused by misuse, neglect, attempt to repair, unauthorized alteration or modification, incorrect line voltage, fire, accident, flood or other hazard. The warranty made herein is in lieu of all other warranties, expressed or implied, including any warranty or merchantability or fitness for a particular purpose. Gfp will not be liable for personal damage or personal injury (unless primarily caused by its negligence), loss of profit, or other incidental or consequential damages arising out of the use or inability to use this equipment. This warranty specifically does not cover damage to laminating rollers caused by knives, razor blades, or any sharp objects or abrasives, or failure caused by adhesives, or damage caused by lifting, tilting and/or any attempt to position the machine other than rolling on the installed castors or feet on even surfaces, or improper use of the machine. Warranty repair or replacement by Gfp or its authorized reseller(s) does not extend the warranty beyond the initial period from the date of installation. Unauthorized customer alterations will void this warranty. PO Box 1097 Maryland Heights, MO

13 THERMAL LAMINATOR Machine Comparison 47"" Models Gfp Royal Sovereign GBC/ ACCO September 2015 Models 847 DH RSH-1151 Spire III 44T Laminating Width 47" 45" 44" Retail Price 13,995 10,300 12,395 Nip Opening 1.2" 5/8" 2" Supply shaft operation Swing out Removable Removable Supply shaft design 1" Steel shafts Hex shaft/ 2 Autogrips Aluminum Autogrip Pressure Adjustment Dual Hand wheels 5 position lever Single Hand wheel Front Media unwind Standard No Optional Tension Adjustment Dual Single Single Web Clutch Yes No Yes Maximum Temperature 266⁰ F 320⁰ F 300 F Roller Diameter 5.25" 3.25" 4" Speed 13 ft/min 13 ft/min 20 ft/min Speed control Variable 9 settings Variable Motorized Liner Rewind Yes Yes Yes Roll to Roll capable Yes Yes Yes Rear Rewind Optional Optional Optional Foot Pedal Yes Yes Yes Optical Safety Eyes Yes No Yes Stand Feed Table Swing up Removable Swing up Power 240v 19 A V v 24 A Power consumption 4400W 3300W 4800 Warranty parts 1 year 1 year 1 year Warranty labor 1 year 1 year 1 year Installation Optional Optional Dimensions 70 x 35 x 50" 59" x 26" x 47" 61" x 31" x 56" Net Weight with stand lbs 691 lbs. Safety agency certified ctuvus UL 65" Models Gfp Royal Sovereign Seal/ Neschen GBC/ ACCO Models 865 DH RSH Pro D Spire III 64T Laminating Width 65" 65" 61" 64" Retail Price 15,995 15,000 23,999 13,995 Nip Opening 1.2" 5/8" 1 1/2" 2" Supply shaft operation Swing out Removable Removable Removable Supply shaft design 1" Steel shafts Hex shaft/ 2 Autogrips Aluminum Autogrip Aluminum Autogrip Pressure Adjustment Dual Hand wheels 5 position lever Hand wheel / Handle Single Hand wheel Front Media unwind Standard No Yes Optional Tension Adjustment Dual Single Single Single Web Clutch Yes No No Yes Maximum Temperature 266⁰ F 320⁰ F 284⁰ F 300 F Roller Diameter 5.25" 3.25" 4" Speed 13 ft/min 13 ft/min 20 ft/min 20 ft/min Speed control Variable 9 settings Variable Variable Motorized Liner Rewind Yes Yes Yes Yes Roll to Roll capable Yes Yes Yes Yes Rear Rewind Optional Optional Yes Optional Foot Pedal Yes Yes Yes Yes Optical Safety Eyes Yes No Yes Yes Stand Cabinet Feed Table Swing up Removable Swing up Swing up Power 240v 24 A V 230v 35A v 28 A Power consumption 5700W 3300W 5600W Warranty parts 1 year 1 year 1 year 1 year Warranty labor 1 year 1 year 6 months 1 year Installation Optional Optional Optional Dimensions 88 x 35 x 50" 77" x 26" x 47" 87" x 18" x 56" 81 x 32 x 56 Net Weight with stand lbs 994 lbs 902 lbs. Safety agency certified ctuvus CE/ETL/CSA UL

14 TOP HEAT LAMINATOR Machine Comparison 55" Models Gfp Seal/ Neschen Royal Sovereign DRYTAC April 2016 Models 355TH 54 Base RSC-1402 HW JM 55 Fuzion Laminating Width 55" 55" 55" 55" Retail Price 5,995 10,970 7,200 7,995 Nip Opening 1" 2" 1" 1" Supply shaft operation Removable Removable Removable Removable Supply shaft design Aluminum Quickgrip Aluminum Autogrip Hex shaft/ 2 Autogrips Aluminum Autogrip Pressure Adjustment Hand wheel Hand wheel Fixed positions Hand wheel Tension Adjustment Single Single Single Single Heated Roller Temperature 122⁰ F 104⁰ F 122⁰ F 110⁰ F Roller Diameter 4.5" 5" 3.25" 5.5" Speed 20 ft/min 16.4 ft/min 16.4 ft/min 2-10 ft/min Speed control Variable Variable 9 settings Variable Motorized Liner Rewind Yes Yes Yes Yes Roll to Roll capable Yes NO Yes Yes Rear Rewind Standard NO Yes Yes Front Rewind NO NO NO Yes Foot Pedal Yes Yes Yes Yes Optical Safety Eyes Yes Yes Yes Yes Stand Cabinet Cabinet Feed Table Swing up Swing up Removable Swing down Power 120v 12 amp 115v 15 amp 120v 115v/220 v 13 amp Power consumption 1300W 1500W 725/2600W Warranty parts 1 year 1 year 1 year 1 year Warranty labor 1 year 6 months 1 year 3 months Net Weight with stand 321 lbs. 512 lbs. 408 lbs. 573lbs. Dimensions 72 x 23 x x 19 x 52" 69 x 30 x 49" 73 x 24 x 48" Safety agency certified ctuvus CE CE 65" Models Gfp Gfp Seal/ Neschen Royal Sovereign DRYTAC GBC/ ACCO Models 363TH 563 TH-2 MaxPro 62 Base RSC-1651 LSH JM 63 Fuzion XD Spire III 64CT Laminating Width 63" 63" 61" 65" 63" 64" Retail Price 6,995 8,595 11,795 9,000 9,495 12,195 Nip Opening 1" 1" 2" 1" 1" 2" Supply shaft operation Removable SWING OUT Removable Removable Removable Removable Supply shaft design Aluminum Quickgrip Aluminum Quick Grip Aluminum Autogrip Hex shaft/ 2 Autogrips Aluminum Autogrip Aluminum Autogrip Pressure Adjustment Hand wheel Hand wheel Hand wheel Fixed positions Hand wheel Hand wheel Tension Adjustment Single Single Single Single Single Single Heated Roller Temperature 122⁰ F 140⁰ F 104⁰ F 122⁰ F 110⁰ F 120⁰ F Roller Diameter 4.5" 4.5" 5" 3.25" 4.7" 4" Speed 20 ft/min 20 ft/min 16.4 ft/min 16.4 ft/min 20 ft/min 20 ft/min Speed control Variable Variable Variable 9 settings Variable Variable Motorized Liner Rewind Yes Yes Yes Yes Yes Yes Roll to Roll capable Yes Yes Optional Yes Yes Yes Rear Rewind Standard Optional Optional Optional Yes Yes Front Rewind NO Optional NO NO Yes Yes Foot Pedal Yes Yes Yes Yes Yes Yes Optical Safety Eyes Yes Yes Yes NO Yes Yes Stand Cabinet Cabinet Feed Table Swing up Swing up Swing up Removable Swing down Swing up Power 120v 13 amp 110v 13 amp 115v 15 amp 120v 110v/220v 13 amp 115v 12 amp Power consumption 1400W 1400W 1200W 725/2600W Warranty parts 1 year 1 year 1 year 1 year 1 year 1 year Warranty labor 1 year 1 year 6 months 1 year 3 months 1 year Net Weight with stand lbs. 530 lbs. 432 lbs. 752 lbs. 803 lbs. Dimensions 82 x 23 x x 29 x 50" 82 x 19 x 52" 78 x 30 x 49" 82 x 25 x 51" 81 x 32 x 56 Safety agency certified ctuvus ctuvus CE CE/cTUVus UL

15 COLD LAMINATOR Machine Comparison 30" Models Gfp Daige Daige Royal Sovereign April 2016 Models 230 C Solo 25 Solo 38 RSC 820 CLS Laminating Width 30" 25" 38" 32" Retail Price 2,795 1,350 1,750 3,300 Nip Opening 1/2" 1/2" 1/2" 9/32" Lift mechanism Gear driven Spring tension Spring tension Spring tension Pressure Adjustment Single Wheel Single lever Single lever Fixed positions Tension Adjustment Yes Yes Yes Yes Roller Diameter 2.5" 3.5" 3.5" 2 1/8" Speed 11.5 ft/min 7 ft/min 7 ft/min 8.2 ft/min Speed control Variable Variable Variable 9 presets Supply shaft design 1" Steel shaft Aluminum shaft Aluminum shaft Hex shaft/ 2 Autogrips Liner Rewind Direct drive Belt link Belt link Direct drive Bottom Unwind Yes Opt. media holder Opt. media holder Yes Foot Pedal Optional Optional Stand Optional Optional Feed Table Swing up Fixed Fixed Removable Power 120v.3 amp 110v 110v 120v 60Hz Power consumption 30 watts 100 watts Warranty parts 1 year 1 year 1 year 1 year Warranty labor 1 year None None 1 year Net Weight 117 lbs. 70 lbs. 115 lbs. 154 lbs. Dimensions 43 x 17 x 42" 31 x 17 x 21" 44 x 17 x 21" 41x21.5x18.5 Safety agency certified ctuvus CE CE 55" Models Gfp Daige Seal/ Neschen Royal Sovereign Drytac GBC/ ACCO Models 255 C Solo EL RSC-1401 CLTW JM 55 Force Spire II 54C Laminating Width 55" 55" 54" 55" 55" 54" Retail Price 4,395 2,250 5,980 5,000 6,995 6,995 Nip Opening 1" 1/2" 1" 5/8" 1" 1 3/8" Lift mechanism Gear driven Spring tension Gear Driven Spring tension Gear driven Gear driven Pressure Adjustment Single Wheel Single lever Single Fixed positions Single Wheel Single Wheel Tension Adjustment Yes Yes Yes Yes Yes Yes Roller Diameter 4.5" 3.5" 3.25" 3.25" 4.7" 4" Speed 13 ft/min 7.5 ft/min 14 ft/min 16.4 ft/min 20 ft./min 15 ft/min Speed control Variable Variable Variable 9 settings Variable Variable Supply shaft design Aluminum Quickgrip Aluminum shaft Aluminum Autogrip Hex shaft/ 2 Autogrips Aluminum Auto Grip Aluminum Autogrip Liner Rewind Chain link Belt link Direct drive Linked Direct drive Direct drive Bottom Unwind Yes Opt. media holder Yes Yes Yes Yes Foot Pedal Optional Stand Optional Cabinet Feed Table Fixed Fixed Swing up Removable Removable Removable Power 120v.4 amp 110v 110v 1 amp 120v 2 amp 110v or 220V 115v 2 amp Power consumption 38 watts 230W 100W 725W 230W Warranty parts 1 year 1 year 1 year 1 year 1 year 1 year Warranty labor 1 year None 6 months 1 year 3 months 1 year Net Weight 287 lbs. 150 lbs. 325 lbs lbs. Dimensions 73 x 24 x 55" 61x17 x 55" 75 x 23 x 48" 67 x 22 x 43" 74 x 25 x 46" 71 x 27 x 53" Safety agency certified ctuvus CE CE/ETL CE/ ctuvus UL

16 Dealer Price Schedule Laminating Machines Description Model Dimensions Weight MSRP Laminating Machines L x W x H Dealer Pricing 800 Series Dual Heat Laminator 865DH 65" Dual Heat Laminator Install & Training 865-DH 89" x 38" x 32" 847 $15,995 $10, DH Laminator Stand " x 34" x 5" 131 n/c n/c 847DH 47" Dual Heat Laminator Install & Training 847-DH 76" x 37" x 32" 688 $13,995 $9, DH Laminator Stand " x 33" x 5" 115 n/c n/c Optional Accessories Rear Rewind Motor Assembly for 800 Series Laminators DH " x 9" x 12" 16 $400 $285 65" Rewind Tube Assembly for 865DH Laminator " x 6" x 5" 8 $150 $115 47" Rewind Tube Assembly for 847DH Laminator " x 5" x 4" 7 $150 $ Series Top Heat Laminator 563TH-2 63" Top Heat Laminator w/ Swing Shafts Avail. 7/ TH-2 88" x 32" x 28" 560 $8,595 $5, TH-2 Laminator Stand " x 33" x 5" 121 n/c n/c Optional Accessories Rear Rewind Motor Assembly for 563TH-2 Laminator " x 9" x 12" 16 $400 $285 63" Rewind Tube Assembly for 563TH-2 Laminators " x 5" x 4" 7 $150 $ Series Top Heat Laminator 463TH 63" Top Heat Laminator 463-TH 88" x 28" x 26" 460 $7,395 $4, TH Laminator Stand " x 26" x 7" 98 n/c n/c Optional Accessories Rear Rewind Motor Assembly for 400 Series Laminators TH " x 9" x 12" 16 $400 $285 63" Rewind Tube Assembly for 463TH Laminators " x 5" x 4" 7 $150 $115 63" Film Shaft / Brake Assembly for 463TH Laminator " x 6" x 5" 9 $219 $175 Riser Kit for 400 Series Laminators TH " x 6" x 4" 21 $295 $ Series Top Heat Laminator 363TH 63" Top Heat Laminator Avail. 8/2016 Stand, Foot Switch & Rewind included 355TH 55" Top Heat Laminator Stand, Foot Switch & Rewind included 200 Series Cold Laminator 255C 55" Cold Laminator Stand and Foot Switch included 230C 30" Cold Laminator Stand and Foot Switch included 363-TH 87" x 32" x 27" 500 $6,995 $4, TH 79" x 32" x 27" 450 $5,995 $3, C 78" x 25" x 27" 390 $4,395 $3, C 49" x 21" x 23" 170 $2,795 $1,995 Freight Terms: Machine orders plus freight ALL MACHINES INCLUDE A ONE YEAR PARTS & LABOR WARRANTY P.O. Box 1097 Maryland Heights, MO sales@gfpartnersllc.com rev 7/1/2016

17 Dealer Price Schedule Laminating Machines Description Installation & Training Fees MSRP Dealer Pricing 563TH-2 63" Top Heat Laminator $1,095 $ TH 63" Top Heat Laminator $1,095 $ TH 63" Top Heat Laminator $1,095 $ TH 55" Top Heat Laminator $1,095 $ C 55" Cold Laminator $1,095 $ C 30" Cold Laminator $1,095 $895 Extended Warranty Fees 865DH 65" Dual Heat Laminator One year parts & labor $1,800 $1, DH 47" Dual Heal Laminator One year parts & labor $1,600 $1, TH-2 63" Top Heat Laminator One year parts & labor $1,000 $ TH 63" Top Heat Laminator One year parts & labor $950 $ TH 63" Top Heat Laminator One year parts & labor $850 $ TH 55" Top Heat Laminator One year parts & labor $800 $ TH 63" Top Heat Laminator One year parts & labor $800 $ TH 55" Top Heat Laminator One year parts & labor $750 $ C 55" Cold Laminator One year parts & labor $500 $ C 30" Cold Laminator One year parts & labor $350 $250 Freight Terms: Machine orders plus freight charges ALL MACHINES INCLUDE A ONE YEAR PARTS & LABOR WARRANTY P.O. Box 1097 Maryland Heights, MO sales@gfpartnersllc.com rev 7/1/2016