PACKER SYSTEMS. ITALSWISS Engineering S.r.l. swiss.com
|
|
|
- Peregrine Greer
- 5 years ago
- Views:
Transcription
1 SINGLE & DOUBLE PACKER SYSTEMS
2 IS HYDRAULIC PACKERS They may be used as a single packer or a double one by simple shifting of rubber elements. The rubber rings of our hydraulic packers are interchangeable, so it is possible to use them with tubes and micropiles of different diameters. GEOPACK INFLATABLE PACKERS Geopack inflatable packers are used for cement injections in geotechnical applications to consolidate and/or to make impermeable foundations and tunnels and during other works. They are also used to perform Lugeon tests., 2
3 HYDRAULIC PACKERS They were constructed deliberately to solve the problems during the cement injections. A hand-pump (or 230V electric pump) starts a hydraulic piston which compresses two special elastomer elements attached to steel rings with the same diameter. While stretched, rubber optimizes the leaktightness inside the micropiles and tubes fitted with valves. After simple shifting of some elements, they can be used as a single packer or a double one, depending on needs. The rubber rings of our hydraulic packers are interchangeable, so it is possible to use them with tubes and micropiles of different diameters, which reduces expenses. 1 Lifting eye 2 Washing hole 3 Cement inlet connection 4 Oilconnection 5 Steel ring 1 6 Spacer 7 Rubber 8 Hydraulic cylinder 9 Shank with an injection hole 10 Locknut *Only with models IS 58 IS78 and IS CONFIGURATION 7 10 Single packer Double packer
4 HYDRAULIC PACKER INFLATION PUMPS ISP 380 ISP 700 Model Capacity Max Flow Rate Max Pressure Weight lt lt Bar Kg. ISP ISP ,2 *For the pump we recommend to use hydraulic oil DTE25 Inflation hose Ø inside Ø outside Working pressure Bursting pressure Length Connections 4,8 mm 10,5 mm 350 Bar 1400 Bar 25 m 3/16 BSP 6,4 mm 11,8 mm 350 Bar 1400 Bar 25 m 1/4 BSP
5 B C D E D F A Model Dimensions mm Weight A B C D E F Kg. IS ,1 IS ,0 IS ,3 IS ,6 IS ,4 IS ,0 Packer Rubber ring min. mm Rubber ring max. mm Hydraulic hose connection Injection hose connection Hydraulic pressure min/max bar Expansion Kit Spare Rubber IS BSP 3/16" BSP 1/8" 250/500 IS 32 IS 45 IS 58 IS78 IS BSP 3/16" BSP 1/4" 250/500 BSP 3/16" 250/500 BSP 3/16" BSP 1/2" 250/500 BSP 1/4" BSP 3/4" 250/500 BSP 1/4" BSP 1 1/4" 250/500
6 GEOPACK INFLATABLE PACKERS Geopack inflatable packers are used for cement injections in geotechnical applications to consolidate and/or to make impermeable foundations and tunnels and during other consolidation works. They are also used to perform Lugeon tests. There are two types: A single packer which allows to pressurize the cement mortar injected below. A double packer which is normally used inside tubes fitted with valves. It allows to inject mortar from each valve independently. Holes characteristics - with any orientation ( vertical, horizontal, inclined) - used in semi-solid and solid materials: natural such as loose and incoherent terrains, rocks; also for construction sector : bricks, concrete, dams etc. Cement characteristics: The materials usually used are cement, mortar, different additives, aggregate and water. Aggregate dimensions must not exceed packers internal passages. Packer dimensions choice: Consult the table. Packer pumping With water: Suggested when using the packer at the maximum depth of 15 m. At larger depths the counterpressure may make it difficult to pull out the packer. With air or nitrogen: It has to be done with a cylinder fitted with a pressure control and manometer. You must always obey the working pressures indicated below. IMPORTANT: Any other pumping mode is inadvisable and causes the loss of guarantee.
7 Standard Geopack Technical data Geopack Ø 35 Ø Hole mm Press. Max. (Bar) Geopack Ø 44 Ø Hole mm Press. Max. (Bar) Geopack Ø 54 Ø Hole mm Press. Max. (Bar) Geopack Ø 74 Ø Hole mm Press. Max. (Bar) Geopack Ø 84 Ø Hole mm Press. Max. (Bar) Geopack Ø 102 Ø Hole mm Press. Max. (Bar)
8 Geopack special Technical data Geopack Ø 30 Ø Hole mm Press. Max. (Bar) Geopack Ø 130 Ø Hole mm Press. Max. (Bar) Geopack Ø 170 Ø Hole mm Press. Max. (Bar)
Swellex Pumps and MAI Grout Pumps
Swellex Pumps and MAI Grout Pumps and Accessories from Atlas Copco Solutions from Materials Technology Swellex pumps from Atlas Copco The installation system for Swellex rock bolts consists of a high pressure
Unigrout Flex M. The flexible grouting system
Unigrout Flex M The flexible grouting system Unigrout Flex M A flexible grouting system Quick and easy to move, the complete Unigrout Flex M system consists of a manually operated grouting platform which
Unigrout Flex S and Flex M. The flexible grouting system to reinforce both underground and on surface construction
Unigrout and The flexible grouting system to reinforce both underground and on surface construction 1 A flexible grouting system Quick and easy to move, the complete Unigrout and system consists of a manually
UNIGROUT FLEX. The flexible grouting system. Product Catalogue
UNIGROUT FLEX The flexible grouting system Product Catalogue UNIGROUT FLEX THE FLEXIBLE GROUTING SYSTEM UNIGROUT FLEX RANGE OFFERS VERSATILE GROUT PLANTS IN VARIOUS SIZES AND CONFIGURATIONS TO MEET YOUR
Right rotation. Left rotation
HAND AUGER 35 to 150 mm CONTINUOUS FLIGHT AUGERS HAND AUGER Thread - auger 22 conical 20/27 Square rod 23 Square rod 32 35 F5 01003501 - - - 46 F5 01004602 - - - 63 F5 01006302 F5 01006303 F5 01006301-80
HYDRO 9 B. Technical features
HYDRO HYDRAULIC POWER PACKS HYDRO 5.5-B Engine: gasoline Honda 5,5 Hp. Manual starter Max. capacity:10 lt/1. Oil tank: 4 lt. Dimensions: 760x590x650 mm. Weight: 30 kg. HYDRO 9 B HYDRO 5.5-B Variable-displacement
Grommet pullers Soapy water Safety glasses Torque Wrench
Please take time to read and understand these installation instructions. We recommend that the installation of this system be performed by a qualified service center or professional muffler installer who
Unigrout grouting platforms
Atlas Copco Ground Engineering Products Unigrout grouting platforms Unigrout Flex concept Unigrout Flex concept Since 1921 Atlas Copco is committed to grouting. Unigrout is a complete range of grouting
Overburden drilling catalogue
Atlas Copco Ground Engineering Products Overburden catalogue Symmetrix overburden systems Overburden Drilling Catalogue Atlas Copco Overburden Drilling System... 3 The Symmetrix System... 4 Drilling overburden...
U2 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 PUMP 180-U2 Pump Body 1 See Note 1 1 180-U2 Pump Body with Flush 1 See Note 1 1 184-U2 Pump Body 1 See Note 1 1 184-U2 Pump Body with Flush 1 See Note 1 1 220-U2 Pump Body 1 See Note 1 1 220-U2
STAINLESS STEEL ARES PNEUMATIC ANGLE-SEAT VALVE
FEATURES The stainless steel ARES valve is intended for the automatic shut-off of networks of fluids. The full-bore, inclined-seat body and the excellent flow-rate coefficients allow for very low pressure
USER INSTRUCTIONS FOR OPERATION & MAINTENANCE 4068 Pneuma c / Hydraulic Installa on Tool
Additional copies of this manual are available at: USER INSTRUCTIONS FOR OPERATION & MAINTENANCE 4068 Pneuma c / Hydraulic Installa on Tool 4068 Hydro-Pneumatic Blind Rivet Nut and Stud Installation Tool
Introduction and Information on the Liebherr Group s Business Development
Introduction and Information on the Liebherr Group s Business Development Stefan Heissler Member of the Board of Directors Liebherr-International AG, Bulle (Switzerland) This Morning s Speakers Introduction
TRANSLATION FROM THE ORIGINAL MANUAL PICTURES AND DRAWINGS ARE NON CONTRACTUAL. WE RESERVE THE RIGHT TO MAKE CHANGES WITHOUT PRIOR NOTICE.
l SPECIFICATIONS STAINLESS STEEL AIRMIX PRESSURE REGULATOR Models : 250-10 / 70 250-10 / 120 120-5 / 40 Manual : 1310 573.041.212 Date : 10/10/13 - Supersede : 21/09/10 Modif. : Update TRANSLATION FROM
Parts Manual 125 Series MA
Parts Manual 125 Series MA - 1 - HEADSTOCK ASSEMBLY - 2 - HEADSTOCK ASSEMBLY ITEM PART N DESCRIPTION QTY 1 1156300 Handle 2 2 900115 Self Locking Nut 3/8 UNF 2 3 1320500 Verticality Screw 2 4 900027 Bolt
Polyurethane Injection Foams
Polyurethane Injection Foams Two types: 1 component and 2 component systems: 2 component system: 355/A series Ready to use components A and B 1 component system: 355/1K Add accelerator to liquid component
Code Desc /8. Tecnical Features. Inlet diameter with reductions 1/2-3/8
Filter - regulator - lubricator Three in one tool which combines in a single body for the air filter, regulator and lubricator outlet pressure in line for pneumatic tools. Necessary where there is any
SupAnchor Rock Reinforcement Strategy Self-drilling hollow anchor systems
SupAnchor Rock Reinforcement Strategy Self-drilling hollow anchor systems The SupAnchor Self-Drilling Hollow Anchor is a unique anchoring system and is today s answer to the increasing demands of the tunnelling
E N REDUCE>REUSE>RECYCLE
REDUCE>REUSE>RECYCLE EN MB: WELL ESTABLISHED, VERSATILE AND DETERMINED MB CRUSHER DEVELOPS AND CREATES EQUIPMENT FOR THE CRUSHING, DEMOLITION, AND RECYCLING INDUSTRIES. It has been doing this for over
LPD. Spare parts list. Post drivers heavy-duty HD-T, HD-RV Atlas Copco Construction Tools AB No f
LPD HD-T, HD-RV Post drivers heavy-duty Contents Contents General information................................................................ 5.....................................................................
TAC Backfill Grout Injection. Two Component Backfill Grout Injection
TAC Backfill Grout Injection Two Component Backfill Grout Injection Contents of Presentation 1. Introduction of TAC Corporation 2. Experience of Backfill Grout Injection 3. Two Components Backfill Grout
Automatic Belt Tracking and Conveyor Systems Equipment
Automatic Belt Tracking and Conveyor Systems Equipment Presentation Outline 1. Company overview 2. Our products 3. Conveyor belt tracking 4. Tracker models 5. What we need for design 6. What we need for
Tahoe-Reno Industrial Center Total Bonding Amounts Engineer's Opinion of Probable Construction Costs (30% Submittal) Project No. 783.
Total Bonding Amounts Brent Farr Date: 05/05/17 Item Project Estimated Cost 1 Induction Well 1 and Britain Ave Non potable Water Line $1,084,353 2 Storage Reservoir Upgrades $11,560,463 3 Booster Station
EC 70T. Spare parts list. Hydraulic breakers. EC 70T s/n BES Construction Tools PC AB No
EC 70T Spare parts list Hydraulic breakers EC 70T s/n BES038596 2018 Construction Tools PC AB No. 9800159801 2018-01 General information This spare parts list applies to the following: Part number Description
SCP CONCRETE PUMPS HYDRAULIC BOOM. Series SCP SCP SCP SCP SCP SCP SCP SCP
CONCRETE PUMPS with HYDRAULIC BOOM SCP Series SCP 25 3.21 SCP 40 3.21 SCP 50 3.21 SCP 60 3.21 SCP 40 3.24 SCP 50 3.24 SCP 60 3.24 SCP 80 3.24 Unique in the World! The Scorpion concrete pump with hydraulic
All DOHC Honda CB750s, CB900s and CB1100s
Installation Instructions for: V &H Racing Curved Guide & AHM Cam Chain Tensioner All DOHC Honda CB750s, CB900s and CB1100s Models C, F and R Page 1 Introduction. Thank you for your purchase of the Vince
Prestressing Equipment
Prestressing Equipment Carbon Fiber Reinforced Stressing Cylinder modern robust efficient Technical data: Operating pressure: 700 bar Connections: freely selectable (e.g.: Walther, Pioneer) Standard load
Please confirm that all parts are present before beginning the factory exhaust system removal and db Performance Exhaust system installation.
Please take time to read and understand these installation instructions. We recommend that the installation of this system be performed by a qualified service center or professional muffler installer who
Spare parts list. Post drivers heavy-duty PDR 95 T, PDR 95 RV.
Spare parts list Post drivers heavy-duty PDR 95 T, PDR 95 RV www.cp.com 339 536 0b Contents Contents General information............................................................... 5 Spare parts list....................................................................
D and DL Annular Blowout Preventers
D and DL Annular Blowout Preventers In the unique design of the Cameron DL Annular BOP, closing pressure forces the operating piston and pusher plate upward to displace the solid elastomer donut and force
Dando Drilling International
Dando Drilling International Dando Terrier and Tooling The Dando Terrier drilling rig has been designed specifically for sampling and testing for geotechnical and environmental analysis. The rig is crawler
Marzocchi Suspension MZ III MZ III. Technical instructions
Technical instructions Exploded view - MZ III - 100 Rif. Code Quantity Spare part list - MZ III - 100 Rif. Code Description Q.ty in the model Technical characteristics: Technical characteristics Single-crown
ATTACHMENTS FOR LOADER CRANES
ATTACHMENTS FOR LOADER CRANES 2012 Rotators page KM 03 S Rotator with shaft 11 KM 04 S Rotator with shaft 11 KM 04 F Rotator with flange 11 KM 06 F Rotator with flange 12 Brick Stack Grapples KM 332V-1100
P.12 P.23 P.24 P.26 DRILLING RIGS AND ACCESSORIES
DRILLING RIGS AND ACCESSORIES P.12 HEAVY DYNAMIC PENETROMETER AND DRILLING RIGS APAFOR APAFOR 50 APAFOR 100 APAFOR 200 APAFOR 220 APAFOR 330 AND 340 APAFOR 430 APAFOR 450 RS APAFOR 450 APAFOR 550 AND 560
Code Desc. Capacity Lt Delivery x stroke LT 0,2
Manual pump for oil Ideal for filling or topping up oil engine, gearbox and differential. Delivery capacity of 0.2 liters for pumped full. Equipped with hose 1.5 M and terminal curved. Desc. Capacity Lt
GRABS AND ROTATORS ATTACHMENTS FOR TRUCK MOUNTED CRANE.
GRABS AND ROTATORS ATTACHMENTS FOR TRUCK MOUNTED CRANE www.hyva.com CRANE ATTACHMENTS BY Brick Stack Grapple H 332 Pallet Fork H 415 Orange Peel Grapple H 650 Clamshell Bucket H 604HPX Small Volume Clamshell
AZAM TECHINICAL DATASHEET ZA-CA ZA-TO ZA-TL ZA-AR ZA-PR ZA-ES ZA-GA ZA-AF ZA-GF APPLICATION EXAMPLES
Codes: C, T, ZTXXL, ZTXXC, E, A,G,AF, GF Reference: FT -en Date: 03/02/17 Revision: 3 Page: 1 of 6 ZA-CA ZA-TO ZA-TL ZA-PR ZA-ES ZA-AR ZA-GA ZA-AF ZA-GF CHARACTERISTICS BASE MATERIAL Wings and cone manufactured
Air / Hydraulic Floor Service Jack
655 Eisenhower Drive Owatonna, MN 55060 USA Phone: (507) 455-7000 Tech. Serv.: (800) 533-6127 Fax: (800) 955-8329 Order Entry: (800) 533-6127 Fax: (800) 283-8665 International Sales: (507) 455-7223 Fax:
Marzocchi Suspension D-Street 24" D-Street 24" Technical instructions
Technical instructions Exploded view - D-Street 24" 80 Rif. Code Quantity D-Street 24" 80 - Oil levels Position Oil type Quantity (cc) Right fork leg SAE 7,5-550013 185 Left fork leg SAE 7,5-550013 185
TERMITICIDE APPLICATION TOOLS
TERMITICIDE APPLICATION TOOLS USER S MANUAL Safety Precautions Connect the tool to the supply hose and be certain the trigger is in the off position before turning on the pump. Do not adjust the tip while
Individual Model and Configuration choice ( based on ''LEGO'' principe for minimization of spares ). Best performance and weight to balance ratio.
LOW COST DRILLING ADVANTAGES Individual Model and Configuration choice ( based on ''LEGO'' principe for minimization of spares ). Best performance and to balance ratio. Perfect quality and customer service.
Grabs and Rotators. Attachments for truck mounted crane.
Grabs and Rotators Attachments for truck mounted crane www.hyva.com Crane Attachments by Brick Stack Grapple H 332 Pallet Fork H 415 Orange Peel Grapple H 650 Clamshell Bucket H 604HPX Small Volume Clamshell
Operation Manual Cobra 1 Automatic Spray Gun
SB-E-2-CBA1 ISS.06 Operation Manual Cobra 1 Automatic Spray Gun E P 1 12 1 Operation Manual Cobra 1 Automatic Spraygun Important Read and follow all instructions and Safety Precautions before using this
H o l l o w S t e m A u g e r E q u i p m e n t
H o l l o w S t e m A u g e r E q u i p m e n t Pitcher Drilling s hollow stem auger rigs are used to collect soil samples and to construct/destruct monitoring or recovery wells. TRUCK AND TRACK MOUNTED
TECHNICAL INFORMATION F25 AS LT3 12/2011 / B 1
F25 AS LT3 1 WORKING MACHINE WITH SOLVENT HYDROCARBON MACHINE CAPACITY 25 Kg 55 60 Lbs BASKET Diameter 1000 mm 39.4 inches Depth 640 mm 25.2 inches Volume 500 Lt 14.1 cu.ft Wash speed 20 50 rpm Extract
SB-E-2-CBA1 ISS.13. Operation Manual Cobra 1 Automatic Spray Gun
EN SB-E-2-CBA1 ISS.13 Operation Manual Cobra 1 Automatic Spray Gun Operation Manual Cobra 1 Automatic Spraygun Important Read and follow all instructions and Safety Precautions before using this equipment
CP3850 Series Grinders
1/11 1 Spring cylindrical 6156811670 1 1 1 1 1 1 1 X 2 Warning label 6158713860 1 1 1 1 1 1 1 X 3 CP plate 2050553403 1 1 1 1 1 1 1 X 4 Name plate 2050553413 1 1 1 1 1 1 1 X 5 Ring screw 6156731760 1 1
Using a 4mm pin punch ( ) drive Trigger Pin 40 out and remove Trigger Assembly 39.
Servicing the Tool Rotary Valve Dismantling Using a mm pin punch (079000058) drive Trigger Pin 0 out and remove Trigger Assembly 39. Disconnect Hose Assembly 35 and remove Nut 3. Seperate Head Assembly
Update about new Bent-Axis piston pumps
Update about new Bent-Axis piston pumps Dear Customer, referring to our previous communication about the new bent axis piston pumps, with the aim to help you in the switch from the old series to the new
HYDRAULIC ROCK DRILL HL700 Drifter Parts
HYDRAULIC ROCK DRILL Drifter Parts TAMROCK HL 700 DRIFTER 303 790 34 hydraulic rock drill Some parts interchangeable with HL710 2 302 897 41 housing assy' 1 SEP. PART LIST 5 303 787 18 spacer assy 1 INCL.
CONTINUOUS FLIGHT AUGERS AND BITS
CONTINUOUS FLIGHT AUGERS AND BITS Hex-Tube Augers Available in Hole Sizes 2½ (6 mm) through 12 (05 mm) Hex Sized 1 / 16, 1 1 / 8, 1 5 / 8 and 2 (20.6 mm, 29 mm, 1 mm and 50.8 mm) Field replacement shank
TECHNICAL INFORMATION HXL 8015 S 11/2011 / 730-C 1
1 WORKING MACHINE WITH SOLVENT HYDROCARBON MACHINE CAPACITY 15 Kg 35 Lbs BASKET Diameter 800 mm 31.5 inches Depth 560 mm 22 inches Volume 285 Lt 10.1 cu.ft Wash speed 20 55 rpm Extract speed 300 500 rpm
AIRTOOLS. Ratchets 256. Impact tools 257. Screwdrivers 261. Drills 262. Hammers 263. Sanders and grinders 264. Special tools 266.
254 Ratchets 256 Impact tools 257 Screwdrivers 261 Drills 262 Hammers 263 Sanders and inders 264 Special tools 266 Blow guns 268 Hose reels 269 Air line accessories 270 Hoses 273 255 USAG airtools comply
LHD. Spare parts list 23 M. Rock drills Construction Tools PC AB No
LHD 23 M Spare parts list Rock drills 2015 Construction Tools PC AB No. 3392 5014 01 2015-06 General information This spare parts list applies to the following: Part number Description 1801 3800 01 (clockwise
PRESSURIZED STEEL BOILER WITH REVERSED FLAME
smoke pipes PRESSURIZED STEEL BOILER WITH REVERSED FLAME OUTPUT RANGE from 340 to 7000 WORKING TEMPERATURE minimum return temperature 55 OPERATION WITH gas or oil fired jet burners MODELS 340 420 510 630
Ram Cushions and Pressure Parallels Dynamic Solutions For A Global Market
Nitro-Dyne Ram Cushions and Pressure Parallels APPROVED 97/23/EC Dynamic Solutions For A Global Market Nitro-Dyne Ram Cushions and Pressure Parallels Table of Contents Page Introduction...2 The Advantages...3
MUV. VERTICAL MULTI-STAGE PUMPS 2 pole - 50 Hz APPLICATIONS ADVANTAGES OPERATING RANGES. Certified
OPERATING RANGES Flow rates of up to: 14 m 3 /h Manometric heads of up to: 137 m CE Max. operating pressure: 1 bar Max. intake pressure: 6 bar Temperature range: 15 to + 9 C Max. ambient temperature: +
4069 Operating Instructions
4069 Operating Instructions SETTING TOOL FOR RIVKLE BLIND RIVET NUTS AND STUDS CONTENTS I TOOL DESCRIPTION... p 2 II ACCESSORIES... p 4 III TOOL USE... p 6 IV MAINTENANCE... p12 V TROUBLESHOTTING AND SOLUTIONS...
Choose quality. FIMA 1
S C R E W C O M P R E S S O R S M A D E I N I T A L Y Choose quality. FIMA 1 AIR COMPRESSORS AND ACCESSORIES FIMA has been operating on the international market for over 15 years. Its staff has over 40
Micropiles are often used
16 PILING & FOUNDATIONS Downsizing Micropiles, also known as minipiles, are the main choice of foundation system for many ground-engineering projects. GDI talks to piling-rig manufacturers about the technology
U1 PUMP PARTS PRICE LIST
ITEM 1 7 8 9 060-064 - 130-134 - 133-U1 PUMP PARTS PRICE LIST DESCRIPTION QTY. PER PUMP 060-U1 Pump Body 1 See Note 1 1 060-U1 Pump Body with Flush 1 See Note 1 1 064-U1 Rectangular Flange Inlet Body 1
ZEUS type BRONZE PNEUMATIC ACTUATED VALVE
CHARACTERISTICS The ZEUS bronze pneumatic actuated valve is dedicated to the automatic shut-off of fluid pipework. The full bore angle body and the great flow rates permit to have very limited pressure
Mining. Rock Hydro-Fracturing Systems increase your mining production
Mining withwater Rock Hydro-Fracturing Systems increase your mining production Rock-Hydro Fracturing 1000 H.P. Jet Boring Up to 50,000 psi Grout Plants, Mixers & Pumps Up to 10,000 psi ConMICO Inc. With
Lubrication equipment
Made In Italy Lubrication equipment PRODUCTS CATALOGUE GREASE DISTRIBUTION page 2 OIL DISTRIBUTION page 38 EXHAUSTED OIL ASPIRATORS page 112 TROLLEYS FOR DRUMS TRANSPORT page 118 OIL DRAIN UNITS page 134
Chicago Pneumatic Construction Tools
Chicago Pneumatic Construction Tools Chipping Hammers, Clay Diggers, Demolition Picks and Busters Built to last Hammers, Picks and Clay Diggers Key features CP 0012 handle based on the famous CP 0009 design
1/2" AIR DRIVEN DIAPHRAGM PUMP
1/2" DRIVEN DIAPHRAGM PUMP OPERATION AND SERVICE GUIDE O-1225D NOV. 2008 Page 1 of 6 Refer to Bulletin P-605, Parts List P-9151 DRIVEN, DOUBLE DIAPHRAGM PUMP MANUAL Congratulations on purchasing one of
Next, set the bar level and tighten it down. Do this on both the driver and passenger sides.
Next, set the bar level and tighten it down. Do this on both the driver and passenger sides. Using two tape measures, measure the outside width at the front and the rear of the tubes. The front dimension
LONG-LASTING BREAKING POWER
HYDRAULIC BREAKERS LONG-LASTING BREAKING POWER XP HYDRAULIC BREAKER HEAVY RANGE MEDIUM RANGE LIGHT RANGE 4 8 10 12 SH FULLY HYDRAULIC BREAKER 17 TOOLS OPTIONS 20 21 SPECIAL APPLICATIONS CREDITS 22 26 EXTREME
Servicing the Tool. Service Kit SERVICE KIT. For all servicing we recommend the use of the service kit (part number (S)).
Servicing the Tool Service Kit For all servicing we recommend the use of the service kit (part number 07900-04750(S)). SERVICE KIT ITEM PART Nº DESCRIPTION Nº OFF ITEM PART Nº DESCRIPTION Nº OFF 07900-00002
Slide the billet aluminum cap over the bushing and secure with the 3/8-16 x 2 1/2 socket head allen and locknuts provided.
Slide the billet aluminum cap over the bushing and secure with the 3/8-16 x 2 1/2 socket head allen and locknuts provided. Put the urethane bushings into the upper antiroll-bar-link eyebolt. Coat the bushings
PURESTREAM SYSTEM - ASSEMBLY GUIDE
PURESTREAM SYSTEM - ASSEMBLY GUIDE INSTRUCTION VIDEO LINK: www.cagpurification.com/installment--procedure--videos.aspx OR SCAN CODE BELOW pipes fittings for compressed air NECESSARY TOOLS FOR INSTALLATION
George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type 025/028
George Fischer Pneumatically Actuated Diaphragm Valve DIASTAR Type /8 Diaphragm Valves - Pneumatic º All-plastic actuator made of PP-GF º Compact design º Lightweight º Comprehensive line of accessories
Sandvik VSI Crushers new CV200 series
Sandvik VSI Crushers new CV200 series We have listened to our customers At Sandvik, we have established ourselves as market leaders in autogenous VSI crushing. In order to maintain our market lead, we
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when working under a vehicle.
Please take time to read and understand these installation instructions. CORSA Exhaust System Installation We recommend that the installation of this system be performed by a qualified service center or
Auto Feed Drills & Tappers. Comprehensive range Single spindle operations Multi-spindle processes. More Than Productivity
Auto Feed Drills & Tappers Comprehensive range Single spindle operations Multi-spindle processes More Than Productivity AFD Applications Ease of Integration into Machine or Process Extensive range of mounting
200 HYDRO-TOWER 200. Ordering Information. Wall-hung Toilet That Matches The Tank. Function Explanation
200 HYDRO-TOWER 200 IN-WALL TANK INSTALLATION INSTRUCTIONS K-6287T, K-6288T Read installation guide in illustration and word file carefully, and install the tank according to instructions in the guide
Quick guide. GlasPure filling sets
GlasPure filling sets Quick guide GlasPure columns can be filled with the appropriate adsorbent by the user himself. A homogeneouly packed column is essential to obtaining a reliable and reproducible separation.
Atlas Copco Geotechnical Engineering Products. Pipe roofing solutions
Atlas Copco Geotechnical Engineering Products Pipe roofing solutions Pipe roofing solutions pre-support in tunnel constructions Cities and urban areas around the world are continuously being modernized
BOOMER M-SERIES. Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2.
BOOMER M-SERIES Face drilling rig for tunneling and mining applications with a coverage area up to 65 m 2. RELOADED TO MEET YOUR CONDITIONS THE BOOMER M-SERIES FACE DRILLING RIGS HAVE BECOME A KEY PIECE
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS. Mr. Proprietor
INSTALLATION, OPERATION AND MAINTENANCE INSTRUCTIONS APN PUMPS Mr. Proprietor Congratulations! You have just purchased an equipment of simple construction, designed with the most advanced technology, with
BT-Series Shaft Mounted Gear Units
BT-Series Shaft Mounted Gear Units The POWERGEAR BT-Series Round Shaft Mounted Gear Unit is a versatile gearbox developed on special demand from our customers worldwide. The speed reducer is compact in
First, check and record the camber and caster readings, they will be adjusted later.
First, check and record the camber and caster readings, they will be adjusted later. The caliper-mounting bosses are machined perpendicular to the spindle so they are an excellent place for the level.
OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS SETTING TOOL FOR RIVKLE BLIND RIVET NUTS AND STUDS CONTENTS I TOOL DESCRIPTION... p 2 II ACCESSORIES... p 4 III TOOL USE... p 6 IV MAINTENANCE... p12 V TROUBLESHOTTING AND SOLUTIONS...
CONSTRUCTION & MINING. Version 1.00
CONSTRUCTION & MINING Version 1.00 TCA-7 Light weight and easy to handle. Automatic throttle. Few parts; easy maintenance. Forged parts: durable. TCB BREAKERS Simple structure, less maintenance, compact,
Breakers. Make an Impact.
Make an Impact. Breakers BREAKING TECHNOLOGY Bretec first made its mark in the hydraulic breaker OEM business back in 1994. Now after almost 20 years since Bretec s first impact, a Bretec branded breaker
Please take time to read and understand these installation instructions.
Please take time to read and understand these installation instructions. We recommend that the installation of this system be performed by a qualified service center or professional muffler installer who
T-200B SERIES PRECIPITATION GAUGE
GEONOR T-200B SERIES PRECIPITATION GAUGE MANUAL FOR 600-mm, 1000-mm & 1500-mm capacity gauges 1 TABLE OF CONTENTS 1. INTRODUCTION PRECIPITATION GAUGE... 3 1.1. Principle of Operation... 3 1.2. Why is it
SIMPLE PULLEY BLOCK TO HOIST THE SKIP IN LUPENI MINE
SIMPLE PULLEY BLOCK TO HOIST THE SKIP IN LUPENI MINE Dumitrescu Iosif, PhD, Assoc. Prof., Eng. - Department of Industrial Mechanical Engineering and Transport, University of Petrosani Itu Răzvan-Bogdan,
TWO-PRESSURE VALVE ASSEMBLY
BULLETIN A-1 TWO-PRESSURE VALVE ASSEMBLY FOR WATER, 95/5 OR OIL SERVICE 35 PSI (2.4 Bar) air recommended on diaphragm The Valv-Trol Two-Pressure Operating Valve is actually an assembly of three of our
220-UL PUMP PARTS PRICE LIST
ITEM 1 PUMP Pump Body 1 See Note 1 1 Pump Body with Flush 1 See Note 1 1 7 Drive Shaft (Replaces 103227) 1 108425 8 Short Shaft (Replaces 103228) 1 108426 9 10 220-UL PUMP PARTS PRICE LIST DESCRIPTION
Datasheet Pressure Reducing Valves V782/V82/V182
Datasheet Pressure Reducing Valves V78/V8/V8 Advantages - No auxiliary energy is required to operate the valve - Small standard tolerances due to the large control surface and the spiral spring - Can also
Slump Master III Slump Inspection and Safety Platform for Single & Double Units
VERSION: SM88 G3.20 Inspection and Safety Platform for Single & Double Units Operating and Service Manual *Includes Parts List 2014 C & W Manufacturing and Sales Co. Dear Customer, C & W Manufacturing
STOP IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED TO ACTIVATE YOUR LIMITED LIFETIME WARRANTY GO TO: CORSAPERFORMANCE.
IMPORTANT WARRANTY & INSTALLATION INSTRUCTIONS ATTACHED Please Forward All Attached Information to Consumer Warranty Not Valid Unless Returned to CORSA Exhaust We ask that you take a few moments to complete
TECHNICAL INFORMATION HXL8018S-K 11/2012 / 733-B 1
HXL8018S-K 1 WORKING MACHINE WITH SOLVENT HYDROCARBON / GREEN EARTH / SOLVON K4 MACHINE CAPACITY 18 Kg 40 Lbs BASKET Diameter 900 mm 35.4 inches Depth 535 mm 21 inches Volume 340 Lt 12 cu.ft Wash speed
Unilift CC 7-A1 (240V,0.25kW, L/sec,1-7m)
Unilift CC 7-A (24V,.25kW,.4-2.6L/sec,-7m) Contents: Unilift CC 7 (9628974)... 2 Quotation text... 2 Quotation text incl. photo... 3 Data sheet incl. curve... 4 Pump curve... 5 Dimensional drawing... 6
HLX5 Drifter Parts.
HLX5 Drifter Parts TAMROCK HLX5 550 467 92 HYDRAULIC ROCK DRILL HLX 5 1 HLX5 152 749 48 FLUSHING DEVICE ASSEMBLY 1 SEP. PART LIST, INCL. PART 39 2 HLX5 550 466 28 GEARBOX 1 SEP. PART LIST 8 HLX5 550 577
Completion Tools Catalog
Completion Tools Catalog www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. www.teamoiltools.com 2012 TEAM Oil Tools. All rights reserved. TABLE OF CONTENTS P/N Description Page P/N Description
DOUBLE ACTING METRIC RANGE
CONTENTS Page 2 General specifications Ram Style No. Female Rod Male Rod 3 Part Numbering System 4 Basic Dimensions 5 Load Calculations 6 Load Calculations 7 Buckling Calculations 8 Buckling Calculations
Your Partner for Professional Pipe and Cable Plow Installations
www.cable-plow.de Your Partner for Professional Pipe and Cable Plow Installations since 1971 Made in Germany. TRADITION. INNOVATION. FÖCKERSPERGER. TRADITION. INNOVATION. FÖCKERSPERGER. The FRANK FÖCKERSPERGER
The Right Tool for Your Tough Job
SULLAIR air tools The Right Tool for Your Tough Job Applications Tool Sullair Model Class Weight cfm Horizontal and overhead applications Chipping Hammer MCH-2/3/4 15# 16-19 lbs 26-33 Industrial applications