Aftermarket Tractor,Skidsteer & Wheel Loader Attachments

Transcription

1 SEQ. # MINNESOTA PRICING PAGES Titan Machinery FAE Attachments December 2017 Price quote for: Aftermarket Tractor,Skidsteer & Wheel Loader Attachments Vendor Name: Titan Machinery Inc Contact Person: Brenden Honebrink Street Address: 644 East Beaton Drive P.O. Box: City, State, Zip West Fargo, ND Phone #: Toll Free #: Fax #: Address: 1.0 Manufacturer's Name Attachment Description Warranty Term (months, years) Percent Discount (%) to be applied to Price List Date & I.D. of Price List 2.0 Delivery Charges (See Special Terms and Conditions) DELIVERY STARTING POINT Price per loaded mile (City) (State, Zip Code) FAE All Products 2 Years 5% 2018 Price List NO FLAT RATE ALLOWED Flowery Branch GA, $ Price for additional Service Manual Price for additional Parts Manual Included Included 4.0 Installation Services: Per Hour (Shop Labor Rate) Installation services may be requested on an "as needed" basis. (See Special Terms and Conditions) $

2 SWIFT EVENT TITLE & NUMBER: AFTERMARKET ATTACHMENTS FOR TRACTORS, SKIDSTEERS AND WHEEL LOADERS ** Following is a list of all distributors that are authorized to sell the contract equipment listed in the above solicitation. ** SWIFT Vendor Numbers: Provide the Swift Vendor Number (SWIFT ID) and Location Code (LOC CODE) for each Authorized Distributor. Each Authorized Distributor must have an accurate SWIFT ID. ** INSURANCE: All distributors MUST provide the required insurance certificates to the State as outline in the Swift Event Special Terms and Conditinos before any State Contract may be executed. COMPANY NAME SWIFT ID LOC CODE COMPANY ADDRESS ST /ZIP PHONE CONTACT NAME Titan Machinery Inc County Road 101 E, Shakopee MN, Brenden Honebrink Titan Machinery Inc th Street SW, Fargo ND, Mary Aure Titan Machinery Inc Ingersoll Ave, Crookston MN, Kraig Rygg Titan Machinery Inc Haines Road, Hermantown MN, John Kreklow Titan Machinery Inc James Road, Rogers MN, Brenden Honebrink Titan Machinery Inc North Hwy 59, Marshall MN, Lucas Hilgemann Titan Machinery Inc W 62nd St N. Sioux Falls SD, Matt Leighton Titan Machinery Inc N 1626 Wuensch Road, La Crosse WI, Jesse Schmidt

3 004 LAND CLEARING PTO DRIVEN HEADS FORESTRY MULCHERS 006 UML/ST 008 FML/ST 010 UML/LOW 012 UML/DT 014 FML/DT 016 UML/S/DT - NEW 018 UMM/DT 020 UMM/S - UMM/S/HP 022 UMH/S - UMH/S/HP 024 UMH/MEGA FORESTRY TILLERS 026 SCH - SCH/GT 028 SSL SPEED 030 SSL 032 SSM - SSM/HP 034 SSH MULTITASKS 036 SFL 038 SFM - NEW 040 SFH - SFH/HP STONE CRUSHERS 042 STCL 044 STC 046 STCH - STCH/HD 048 RSM 004 CONSTRUCTION PTO DRIVEN HEADS MULTITASK 006 RSL 008 MTL - NEW 010 MTM - MTM/HP 012 MTH 014 STABILIZATION 014 SSH 016 STABI/H 018 CONSTRUCTION HYDRAULIC DRIVEN HEADS CRUSHERS 020 STC/SSL 050 HYDRAULIC DRIVEN HEADS MULCHERS FOR SKID STEERS 052 PMM/SSL 054 DML/SSL - DML/SSL/VT 056 UML/SSL/VT 058 UML/SSL/VT/BL - NEW 060 STC/SSL

4 FORESTRY MULCHERS UML/ST from 50 to 110 HP Ø 8 in max FORESTRY MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Transmission with belts in XPB Hydraulic rear hood Welded steel counter-blades Adjustable skids Protection chains OPTIONS Possibility to choose Transmission 540 / 1000 rpm Frontal attachment Extended 3 point linkage Hydraulic top link Mechanical push frame Special skids to go underground Multiple tooth options All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter No. teeth type C/3 + C/3/SS No. teeth type I + C/3/SS UML/ST or UML/ST or UML/ST or UML/ST or Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. C/3 (standard) C/3/HD (option) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)

5 PRICE LIST Part number Part description Notes Price $ UML/ST with standard C/3 teeth UML-ST-125 Universal forestry mulcher 1000 rpm 24, UML-ST-125 Universal forestry mulcher 540 rpm 24, UML-ST-150 Universal forestry mulcher 1000 rpm 25, UML-ST-150 Universal forestry mulcher 540 rpm 25, UML-ST-175 Universal forestry mulcher 1000 rpm 27, UML-ST-175 Universal forestry mulcher 540 rpm 27, UML-ST-200 Universal forestry mulcher 1000 rpm 29, UML-ST-200 Universal forestry mulcher 540 rpm 29, Machine equipped D O With rotor UML/ST-125 Ø220 type I 1, D O With rotor UML/ST-150 Ø220 type I 1, D O With rotor UML/ST-175 Ø220 type I 2, D O With rotor UML/ST-200 Ø220 type I 2, Rotor equipped O With tooth-blade type C/3 to be multiplied for rotor teeth quantity O With tooth type C/3/HD to be multiplied for rotor teeth quantity O With tooth type K to be multiplied for rotor teeth quantity Options O Guard frame L-125 mechanical guard frame 1, O Guard frame L-150 mechanical guard frame 1, O Guard frame L-175 mechanical guard frame 1, O Guard frame L-200 mechanical guard frame 1, O Hydraulic top link 50 x 30 x 280 cat O Ground penetration skids for UML/S skids to go underground O Wide angle PTO drive shaft W (surcharge) for tractors with short 3 point linkage O Front attachment kit UML/ST 540 rpm to mount the mulcher on the front O Front attachment kit UML/ST 1000 rpm to mount the mulcher on the front Spare Parts K Tooth type C/ K Tooth type C/3/HD Blade adaptor C/ Blade type C/ K Tooth type I Only used on type I rotor K Tooth type K Only used on type I rotor K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=120) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Belt XPB Gates Quad Power l= belts per unit (4belts per uml 125) Yokes PTO drive shaft W2400 K Nm standard PTO UML ST 540rpm PTO drive shaft W2400 K64 rif standard PTO UML ST 1000rpm - W O Yoke for W2400 1"3/8 Z21 ASGE - 1" 3/8 Z6 standard yoke 6 7

6 FORESTRY MULCHERS FML/ST from 50 to 110 HP Ø 8 in max FORESTRY MULCHER FOR PTO TRACTORS WITH SWINGING HAMMER ROTOR. STANDARD EQUIPMENT PTO shaft Gearbox with freewheel Transmission with belts in XPB Hydraulic rear hood Welded steel counter-blades Adjustable skids Protection chains OPTIONS Possibility to choose Transmission 540 / 1000 rpm Frontal attachment Extended 3 point linkage Hydraulic top link Mechanical push frame All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter No. teeth type FMM FML/ST or FML/ST or FML/ST or FML/ST or Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. Hammer FMM (standard)

7 PRICE LIST Part number Part description Notes Price $ FML/ST FML/ST-125 Forestry mulcher 1000 rpm 18, FML/ST-125 Forestry mulcher 540 rpm 18, FML/ST-150 Forestry mulcher 1000 rpm 19, FML/ST-150 Forestry mulcher 540 rpm 19, FML/ST-175 Forestry mulcher 1000 rpm 20, FML/ST-175 Forestry mulcher 540 rpm 20, FML/ST-200 Forestry mulcher 1000 rpm 22, FML/ST-200 Forestry mulcher 540 rpm 22, Options O Guard frame L-125 mechanical guard frame 1, O Guard frame L-150 mechanical guard frame 1, O Guard frame L-175 mechanical guard frame 1, O Guard frame L-200 mechanical guard frame 1, O Hydraulic top link 50 x 30 x 280 cat D O Extended three point linkage kit for U-FML/DT 1, O Front attachment kit FML/ST 540 rpm to mount the mulcher on the front O Front attachment kit FML/ST 1000 rpm to mount the mulcher on the front Spare Parts Hammer FMM Hammer retaining shaft Ø Hammer retaining shaft Ø Hammer retaining shaft Ø Hammer retaining shaft Ø Plug M TE BSPP 1" DIN Belt XPB Gates Quad Power l= belts per unit (4belts per fml125) Yokes PTO drive shaft W (without yoke) standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke 8 9

8 FORESTRY MULCHERS UML/LOW from 60 to 110 HP Ø 8 in max FORESTRY MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Transmission with belts in XPB Hydraulic rear hood Welded steel counter-blades Adjustable skids Reinforced heavy duty frame to increase axial loads Protection chains Especially developed for tractors with low three point hitch (e.g. crawler tractors). OPTIONS Hydraulic top link Mechanical push frame Special skids to go underground Multiple tooth options MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter No. teeth type C/3 + C/3/SS No. teeth type I + C/3/SS UML/LOW UML/LOW UML/LOW Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. C/3 (standard) C/3/HD (option) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)

9 PRICE LIST Part number Part description Notes Price $ UML/LOW with standard C/3 teeth UML/ST-150 LOW Universal forestry mulcher 1000 rpm for crawler tractors 25, UML/ST-150 LOW Universal forestry mulcher 540 rpm for crawler tractors 25, UML/ST-175 LOW Universal forestry mulcher 1000 rpm for crawler tractors 27, UML/ST-175 LOW Universal forestry mulcher 540 rpm for crawler tractors 27, UML/ST-200 LOW Universal forestry mulcher 1000 rpm for crawler tractors 29, UML/ST-200 LOW Universal forestry mulcher 540 rpm for crawler tractors 29, Machine equipped D O With rotor UML/ST-150 Ø220 type I 1, D O With rotor UML/ST-175 Ø220 type I 2, D O With rotor UML/ST-200 Ø220 type I 2, Rotor equipped O With tooth-blade type C/3 to be multiplied for rotor teeth quantity O With tooth type C/3/HD to be multiplied for rotor teeth quantity O With tooth type K to be multiplied for rotor teeth quantity Options D O Guard frame L/LOW-150 1, D O Guard frame L/LOW-175 1, D O Guard frame L/LOW-200 1, O Hydraulic top link 50 x 30 x 280 cat O Hydraulic top link 50 x 30 x 205 cat. 2 with shorter top link cylinder (44 cm) O Ground penetration skids for UML/S skids to go underground O Wide angle PTO drive shaft W (surcharge) for tractors with short 3 point linkage Spare Parts K Tooth type C/ K Tooth type C/3/HD Blade adaptor C/ Blade type C/ K Tooth type I Only used on type I rotor K Tooth type K Only used on type I rotor K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=120) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Belt XPB Gates Quad Power l= belts per unit Yoke PTO drive shaft W2400 K Nm standard PTO - W O Yoke for W2400 1"3/8 Z21 ASGE - 1" 3/8 Z6 standard yoke 10 11

10 FORESTRY MULCHERS UML/DT from 80 to 130 HP Ø 9 in max FORESTRY MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Transmission with belts in XPB Hydraulic rear hood Welded steel counter-blades Adjustable skids Anti dust machine body Protection chains OPTIONS Frontal attachment Extended 3 point linkage Hydraulic top link Mechanical push frame Hydraulic push frame Special skids to go underground Multiple tooth options MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (lbs) Max shredding diameter No. teeth type C/3 + C/3/SS No. teeth type I + C/3/SS UML/DT UML/DT Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. C/3 (standard) C/3/HD (option) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)

11 PRICE LIST Part number Part description Notes Price $ UML/DT with standard "C/3" teeth UML/DT-200 Universal forestry mulcher 34, UML/DT-225 Universal forestry mulcher 35, Machine equipped D O With rotor UML/DT-200 Ø220 type I 2, D O With rotor UML/DT-225 Ø220 type I 3, Rotor equipped O With tooth-blade type C/3 to be multiplied for rotor teeth quantity O With tooth type C/3/HD to be multiplied for rotor teeth quantity O With tooth type K to be multiplied for rotor teeth quantity Options O Guard frame PM/L-200 mechanical guard frame 1, O Guard frame PM/L-225 mechanical guard frame 1, D O Guard frame L/HY-200 hydraulic guard frame 3, D O Guard frame L/HY-225 hydraulic guard frame 4, O Ground penetration skids for UML/S skids to go underground O Hydraulic top link 65 x 35 x 280 cat O Wide angle PTO drive shaft W (surcharge) for tractors with short 3 point linkage D O Extended three point linkage kit for U-FML/DT for tractors with short 3 point linkage 1, D O Plate with screws for protection chains 28-6 links debris dumper Spare Parts K Tooth type C/ K Tooth type C/3/HD Blade adaptor C/ Blade type C/ K Tooth type I Only used on type I rotor K Tooth type K Only used on type I rotor K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=120) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Belt XPB Gates Quad Power l= belts per unit Yoke PTO drive shaft W2400 K64 rif standard PTO - W O Yoke for W2400 1"3/8 Z21 ASGE - 1" 3/8 Z6 standard yoke 12 13

12 FORESTRY MULCHERS FML/DT from 80 to 130 HP Ø 9 in max FORESTRY MULCHER FOR PTO TRACTORS WITH SWINGING HAMMER ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft Gearbox with freewheel Transmission with belts in XPB Hydraulic rear hood Welded steel counter-blades Adjustable skids Anti dust machine body Protection chains OPTIONS Frontal attachment Extended 3 point linkage Hydraulic top link Mechanical push frame Hydraulic push frame MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter No. teeth type FMM FML/DT FML/DT Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. Hammer FMM (standard)

13 PRICE LIST Part number Part description Notes Price $ FML /DT FML/DT-200 Forestry mulcher 27, FML/DT-225 Forestry mulcher 29, Options O Guard frame PM/L-200 mechanical guard frame 1, O Guard frame PM/L-225 mechanical guard frame 1, D O Guard frame L/HY-200 hydraulic guard frame 3, D O Guard frame L/HY-225 hydraulic guard frame 4, O Hydraulic top link 65 x 35 x 280 cat D O Extended three point linkage kit for U-FML/DT for tractors with short 3 point linkage 1, Spare Parts Hammer FMM Hammer retaining shaft Ø Hammer retaining shaft Ø Plug M TE BSPP 1" DIN Belt XPB Gates Quad Power l= belts per unit Yoke PTO drive shaft W (without yoke) standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke 14 15

14 NEW FORESTRY MULCHERS UML/S/DT from 130 to 190 HP Ø 10 in max FORESTRY MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Hydraulic hood Enclosed machine body Centralized greasing hub Hydraulic hoses integrated in the frame Cylinder protections, adjustable skids OPTIONS Special skids to go underground Mechanical push frame Hydraulic push frame W style self aligning device Z style self aligning device Extra ripper for push frame Interchangeable bolted on spike counter blade All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. Transmission with XPB belts Interchangeable bolt on counter blades Inner anti wear FCP plates Bolted on protection chains Hydraulic top link Multiple tooth options MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (lbs) Max shredding diameter No. teeth type C/3 + C/3/SS No. teeth type I + C/3/SS UML/S/DT UML/S/DT Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. C/3 (standard) C/3/HD (option) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)

15 PRICE LIST Part number Part description Notes Price $ UML/S/DT with standard C/3 teeth UML/S/DT-200 Universal forestry mulcher 44, UML/S/DT-225 Universal forestry mulcher 45, Machine equipped D O With rotor UML/S/DT-200 type I HS 3, D O With rotor UML/S/DT-225 type I HS 3, Rotor equipped O With tooth-blade type C/3 to be multiplied for rotor teeth quantity O With tooth type C/3/HD to be multiplied for rotor teeth quantity O With tooth type K to be multiplied for rotor teeth quantity Options D O Guard frame L/S-200 mechanical guard frame 2, D O Guard frame L/S-225 mechanical guard frame 2, D O Guard frame L/S/HY-200 hydraulic guard frame 4, D O Guard frame L/S/HY-225 hydraulic guard frame 4, O Raker teeth type L - 3 set of 3 pcs./ for guard frame O "Z" alignment kit + hydraulic top link for UML/S/DT to enhance the movements 3, O "W" alignment kit for UML/S/DT to enhance the movements 1, O Hydraulic top link 70 x 40 x 280 cat. 2 q.a. to buy separately 1, D O Ground penetration skids for UML/S/DT skids to go underground D O Plate with screws for protection chains 28-6 links debris dumper Spare Parts K Tooth type C/ K Tooth type C/3/HD Blade adaptor C/ Blade type C/ K Tooth type I Only used on type I rotor K Tooth type K Only used on type I rotor K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=120) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Belt XPB Gates Quad Power l= belts per unit Yoke PTO drive shaft W2500 K standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible

16 FORESTRY MULCHERS UMM/DT from 160 to 240 HP Ø 12 in max FORESTRY MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Transmission with belts in WPB Hydraulic rear hood Forged and hardened interchangeable counter-blades Interchangeable inner antiwear plates in Hardox Adjustable skids Anti dust machine body Centralized greasing hub Hydraulic top link Z style self ranging system of the PTO drive shaft/gearbox Hydraulic hoses integrated in the frame Cylinder protection Double line protection chains OPTIONS Frontal attachment Third row of interchangeable forged and hardened counter-blades W style self aligning device between PTO drive shaft/gearbox Mechanic push frame Hydraulic push frame Extra ripper for push frame Special skids to go underground Multiple tooth options MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (lbs) Max shredding diameter No. teeth type C/3 + C/3/SS No. teeth type I + C/3/SS UMM/DT UMM/DT UMM/DT Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. C/3 (standard) C/3/HD (option) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)

17 PRICE LIST Part number Part description Notes Price $ UMM with standard C/3 teeth UMM/DT-200 Universal forestry mulcher 51, UMM/DT-225 Universal forestry mulcher 53, UMM/DT-250 Universal forestry mulcher 55, Machine equipped D O With rotor UMM/S/DT-200 Ø500 type I CT HS 4, D O With rotor UMM/S/DT-225 Ø500 type I CT HS 5, D O With rotor UMM/S/DT-250 Ø500 type I CT HS 5, Rotor equipped O With tooth-blade type C/3 to be multiplied for rotor teeth quantity O With tooth type C/3/HD to be multiplied for rotor teeth quantity O With tooth type K to be multiplied for rotor teeth quantity Options D O Guard frame M-200 mechanical guard frame 3, D O Guard frame M-225 mechanical guard frame 3, D O Guard frame M-250 mechanical guard frame 3, D O Guard frame M/HY-200 hydraulic guard frame 6, D O Guard frame M/HY-225 hydraulic guard frame 6, D O Guard frame M/HY-250 hydraulic guard frame 6, O Raker teeth type M - 3 set of 3 pcs./ for guard frame D O Third line counter blade UMM/DT-200 to achieve a finer product D O Third line counter blade UMM/DT-225 to achieve a finer product D O Third line counter blade UMM/DT-250 to achieve a finer product O "W" alignment kit for UMM/DT to improve PTO angle when lifting 1, D O Ground penetration skids for UMM/DT skids to go underground 1, D O Plate with screws for protection chains 28-6 links debris dumper Spare parts K Tooth type C/ K Tooth type C/3/HD Blade adaptor C/ Blade type C/ K Tooth type I Only used on type I rotor K Tooth type K Only used on type I rotor K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=130) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Belt XPB Gates Quad Power l= belts per unit Yokes PTO drive shaft W2500 K (without yoke) standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible

18 FORESTRY MULCHERS UMM/S - UMM/S/HP from 180 to 350 HP Ø 14 in max FORESTRY MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Transmission with belts in Poly -V L Kevlar Hydraulic rear hood Forged and hardened interchangeable counter-blades Third row of interchangeable forged and hardened counter-blades Inner anti wear clad plates FCP Adjustable skids Adjustable extended 3 point linkage Anti dust machine body Centralized greasing hub Hydraulic top link Z style self ranging system of the PTO drive shaft/gearbox MODEL Hydraulic hoses integrated in the frame Cylinder protection Bigger transmission for tractors up to 450 HP Screwed double line protection chains Bolt-on chains' protection plates OPTIONS W style self aligning device between PTO drive shaft/gearbox Mechanical push frame Hydraulic push frame Extra ripper for push frame Hydraulic clutch transmission (UMM/S/HP 225 and 250) Special skids to go underground Multiple tooth options Engine Weight including (HP) PTO Working Total width rotor (lbs) Max shredding No. teeth type diameter (rpm) width min max type C/3 type B/3 B/3+C/3/SS C/3+C/3/SS UMM/S UMM/S UMM/S UMM/S/HP UMM/S/HP UMM/S/HP Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. B/3 (standard) C/3 (standard) B/3/HD (option) C/3/HD (option) C/3/SS (side scraper)

19 PRICE LIST Part number Part description Notes Price $ UMM/S/B B UMM/S-200 Universal forestry mulcher super rotor B 68, B UMM/S-225 Universal forestry mulcher super rotor B 74, B UMM/S-250 Universal forestry mulcher super rotor B 77, UMM/S/C C UMM/S-200 Universal forestry mulcher super rotor C 67, C UMM/S-225 Universal forestry mulcher super rotor C 73, C UMM/S-250 Universal forestry mulcher super rotor C 76, UMM/S/HP/B B UMM/S/HP-200 Universal forestry mulcher super rotor B 78, B UMM/S/HP-225 Universal forestry mulcher super rotor B 82, B UMM/S/HP-250 Universal forestry mulcher super rotor B 85, UMM/S/HP/C C UMM/S/HP-200 Universal forestry mulcher super rotor C 77, C UMM/S/HP-225 Universal forestry mulcher super rotor C 80, C UMM/S/HP-250 Universal forestry mulcher super rotor C 83, Rotor equipped K Tooth type B/3/HD to be multiplied for rotor teeth quantity O With tooth type C/3/HD to be multiplied for rotor teeth quantity O With tooth type K to be multiplied for rotor teeth quantity Options O Hydraulic top link 120 x 60 x 250 cat. 3-4 q.a. (surcharge) 1, D O Guard frame M/S-200 mechanical guard frame 4, D O Guard frame M/S-225 mechanical guard frame 4, D O Guard frame M/S-250 mechanical guard frame 4, D O Guard frame M/S/HY-200 hydraulic guard frame 8, D O Guard frame M/S/HY-225 hydraulic guard frame 8, D O Guard frame M/S/HY-250 hydraulic guard frame 8, O Raker teeth type M - 3 set of 3 pcs./ for guard frame D O Spike counter blades M/H for UMM/S-200 for finer output material - D O Spike counter blades M/H for UMM/S-225 for finer output material - D O Spike counter blades M/H for UMM/S-250 for finer output material - D O Ground penetration skids for UMM/S skids to go underground 1, D O Hydraulic clutch transmission UMM/S/HP , D O Hydraulic clutch transmission UMM/S/HP , O "W" alignment kit for UMM/S for UMM/S 1, O "W" alignment kit for UMM/S/HP for UMM/S/HP 1, D O Plate with screws for protection chains 32-7 links debris dumper Spare parts K Tooth type B/ K Tooth type B/3/HD Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth type C/ K Tooth type C/3/HD K Tooth type K K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=130) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Chain flap section 32-7 links type M l=240 replaceable in single items Chain flap section 32-7 links type M l=300 replaceable in single items Hex head set screw with knurled ring DIN 6921 M16 x zn Belt SPB-6 Gates Predator PB l= belts per unit Yokes PTO drive shaft W2600 K64 rif (without yoke) standard PTO - W O Yoke for W2600 1"3/4 Z6 ASG - W O Yoke for W2600 1"3/8 Z21 ASG - W O Yoke for W2600 1"3/8 Z6 ASG - 1" 3/4 Z20 standard yoke NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible

20 FORESTRY MULCHERS UMH/S - UMH/S/HP from 240 to 450 HP Ø 16 in max FORESTRY MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft Cam clutch on side PTO Gearbox with freewheel Transmission with belts in XPC Hydraulic rear hood Forged and hardened interchangeable counter-blades Third row of interchangeable forged and hardened counter-blades Inner anti wear clad plates FCP Adjustable skids Adjustable extended 3 point linkage Anti dust machine body Centralized greasing hub Hydraulic top link Z style self ranging system of the PTO drive shaft/gearbox Hydraulic hoses integrated in the frame Cylinder protection Bigger transmission for tractors up to 450 HP Screwed double line protection chains Bolt-on chains' protection plates OPTIONS W style self aligning device between PTO drive shaft/gearbox Mechanical push frame Hydraulic push frame Extra ripper for push frame Hydraulic clutch transmission (UMH/S) Special skids to go underground Multiple tooth options MODEL Engine Weight including Max shredding (HP) PTO Working Total width No. teeth type rotor (lbs) diameter (rpm) width min max type C/3 type A/3 A/3 + MH C/3 + C/3/SS UMH/S UMH/S UMH/S/HP UMH/S/HP Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. A/3 (standard) C/3 (standard) A/3/HD (option) C/3/HD (option) C/3/SS (side scraper) MH (side scraper)

21 PRICE LIST Part number Part description Notes Price $ UMH/S with rotor type A A UMH/S-225 Universal forestry mulcher super rotor A 97, A UMH/S-250 Universal forestry mulcher super rotor A 101, UMH/S with rotor type C C UMH/S-225 Universal forestry mulcher super rotor C 96, C UMH/S-250 Universal forestry mulcher super rotor C 99, UMH/S/HP with rotor type A A UMH/S/HP-225 Universal forestry mulcher super rotor A 106, A UMH/S/HP-250 Universal forestry mulcher super rotor A 110, UMH/S/HP with rotor type C C UMH/S/HP-225 Universal forestry mulcher super rotor C 104, C UMH/S/HP-250 Universal forestry mulcher super rotor C 108, Rotor equipped O With tooth type A/3/HD to be multiplied for rotor teeth quantity O With tooth type C/3/HD to be multiplied for rotor teeth quantity O With tooth type K to be multiplied for rotor teeth quantity Options O Hydraulic top link 120 x 60 x 250 cat. 3-4 q.a. (surcharge) 1, D O Guard frame H/S-225 mechanical guard frame 5, D O Guard frame H/S-250 mechanical guard frame 5, D O Guard frame H/S/HY-225 hydraulic guard frame 9, D O Guard frame H/S/HY-250 hydraulic guard frame 9, O Raker teeth type H - 3 set of 3 pcs./ for guard frame 1, D O Spike counter blades M/H for UMH/S-225 for finer output material - D O Spike counter blades M/H for UMH/S-250 for finer output material - D O Hydraulic clutch transmission UMH/S-225 Only for model UMH/S , D O Hydraulic clutch transmission UMH/S-250 Only for model UMH/S , O "W" alignment kit for UMH/S For UMH/S 1, O "W" alignment kit for UMH/S/HP For UMH/S/HP 2, D O Plate with screws for protection chains 32-7 links debris dumper (8pc pc 250) D O Ground penetration skids for UMH/S skids to go underground 1, Spare parts K Tooth type A/ K Tooth type A/3/HD Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Side scraper tooth type M-H left K Side scraper tooth type M-H right Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Tooth type C/ K Tooth type C/3/HD K Tooth type K K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=130) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Chain flap section 32-7 links type M l=240 replaceable in single items Chain flap section 32-7 links type M l=300 replaceable in single items Hex head set screw with knurled ring DIN 6921 M16 x zn Belt XPC Gates Quad Power l=2500 kevlar 10 belts per unit for UMH/S Belt XPC Gates Quad Power l= belts per unit for UMH/S/HP PTO Shaft for UMH/S models O PTO drive shaft Walterscheid P700 1"3/4 Z PTO drive shaft Walterscheid P700 1"3/4 Z standard PTO for UMH/S - PTO Shaft for UMH/S/HP models O PTO drive shaft Walterscheid P700 1"3/4 Z6 (gearbox 2"1/4 Z22) O PTO drive shaft Walterscheid P700 2"1/4 Z22 (gearbox 2"1/4 Z22) PTO drive shaft Walterscheid P700 1"3/4 Z20 (gearbox 2"1/4 Z22) standard PTO for UMH/S/HP - NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible

22 FORESTRY MULCHERS UMH/MEGA from 350 to 500 HP Ø 20 in max D 10 in FORESTRY MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft Gearbox with freewheel Gearbox with oil cooling system Transmission with belts in Poly-Chain Carbon Hydraulic rear hood Forged and hardened interchangeable counter-blades Third row of interchangeable forged and hardened counter-blades Inner anti wear clad plates FCP Adjustable skids Adjustable extended 3 point linkage Anti dust machine body Centralized greasing hub Hydraulic top link Z style self ranging system of the PTO drive shaft/gearbox Hydraulic clutch transmission Hydraulic hoses integrated in the frame Cylinder protection Inside lateral protection Screwed double line protection chains OPTIONS Hydraulically adjustable skids W style self aligning device between PTO drive shaft/gearbox Mechanical push frame Hydraulic push frame Multiple tooth options Extra ripper for push frame MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (lbs) Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. Max shredding diameter Max working depth No. teeth type A/3 + MH UMH/MEGA UMH/MEGA A/3 (standard) A/3/HD (option) MH (side scraper)

23 PRICE LIST Part number Part description Notes Price $ UMH MEGA A UMH/MEGA-225 Universal forestry mulcher mega rotor A 142, A UMH/MEGA-250 Universal forestry mulcher mega rotor A 149, Rotor equipped O With tooth type A/3/HD to be multiplied for rotor teeth quantity Options D O Guard frame H/S-225 mechanical guard frame 5, D O Guard frame H/S-250 mechanical guard frame 5, D O Guard frame H/S/HY-225 hydraulic guard frame 9, D O Guard frame H/S/HY-250 hydraulic guard frame 9, O Raker teeth type H - 3 set of 3 pcs./ for guard frame 1, D O Hydraulic skids UMH/MEGA 3, O "W" alignment kit for UMH/MEGA 2, Spare parts K Tooth type A/ K Tooth type A/3/HD Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Side scraper tooth type M-H left K Side scraper tooth type M-H right Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø Belt Poly-chain 14M-90 carbon l= belts per unit 3, PTO Shaft O PTO drive shaft Walterscheid P700 1"3/4 Z6 (gearbox 2"1/4 Z22) O PTO drive shaft Walterscheid P700 2"1/4 Z22 (gearbox 2"1/4 Z22) PTO drive shaft Walterscheid P700 1"3/4 Z20 (gearbox 2"1/4 Z22) standard PTO - NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible

24 FORESTRY TILLERS SCH - SCH/GT from 130 to 350 HP D 20 in STUMP CUTTER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Transmission with belts (SCH SS 45 ST: in Poly-Chain Carbon, SCH SS 55 DT: in XPC) Transmission with side gearbox (SCH/GT 65 and SCH/GT 75) Hydraulic side shifting (SCH/GT 75 DT excluded) Welded steel counter-blades Anti dust machine body Inside lateral protections Double line protection chains MODEL min Engine (HP)) max PTO (rpm) Working width OPTIONS Hydraulic top link Multiple tooth options Total width Weight (Ibs) Max working depth No. teeth type A/3 + MH SCH SS 45 ST SCH SS 55 DT SCH/GT 65 ST SCH/GT 65 DT SCH/GT 75 DT Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. A/3 (standard) A/3/HD (option) F/3 (option) MH (side scraper)

25 PRICE LIST Part number Part description Notes Price $ SCH - SCH GT SCH/SS/ST-45 Stump cutter 46, SCH/SS/DT-55 Stump cutter 65, SCH/GT/ST-65 Stump cutter 76, SCH/GT/DT-65 Stump cutter 87, SCH/GT/DT-75 Stump cutter 103, Rotor equipped O With tooth type A/3/HD to be multiplied for rotor teeth quantity O With tooth type F/3 to be multiplied for rotor teeth quantity Options O Hydraulic top link 80 x 40 x 280 cat. 3 q.a. only for SCH 45 1, O Hydraulic top link 100 x 60 x 280 cat. 3-4 q.a. for all other SCH 1, Spare Parts K Tooth type A/ K Tooth type A/3/HD K Tooth type F/ Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Side scraper tooth type M-H left K Side scraper tooth type M-H right Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø Belt Poly-chain 14M-68 carbon l=2310 for SCH 45-1 belt per unit 3, Belt XPC Gates Quad Power l=2500 kevlar for SCH belts per unit Yoke for SCH PTO drive shaft W2500 K standard PTO - Yokes for SCH models PTO drive shaft W2600 K64 rif (without yoke) standard PTO - W O Yoke for W2600 1"3/4 Z6 ASG - W O Yoke for W2600 1"3/8 Z21 ASG - W O Yoke for W2600 1"3/8 Z6 ASG - 1" 3/4 Z20 standard yoke 26 27

26 FORESTRY TILLERS SSL SPEED from 100 to 220 HP Ø 12 in max D 12 in FORESTRY TILLER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Friction clutch on side PTO PTO shaft with cam clutch Gearbox with freewheel Transmission with side gearbox Hydraulic rear hood Welded steel counter-blades Adjustable counter-blade Anti dust machine body Inside lateral protections Protection chains MODEL min Engine (HP) max PTO (rpm) Working width Total width OPTIONS Hydraulic top link Hydraulic push frame Hydraulic support roller Multiple tooth options Weight (Ibs) Max shredding diameter Max working depth No. teeth type B/3 + C/3/SS SSL Speed SSL Speed SSL/DT Speed SSL/DT Speed SSL/DT Speed Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. B/3 (standard) B/3/HD (option) G/3 (option) C/3/SS (side scraper)

27 PRICE LIST Part number Part description Notes Price $ SSL SPEED SSL/ST Speed 150 Forestry tiller 52, SSL/ST Speed 175 Forestry tiller 58, SSL/DT Speed 200 Forestry tiller 76, SSL/DT Speed 225 Forestry tiller 80, SSL/DT Speed 250 Forestry tiller 84, Rotor equipped O With tooth type B/3/HD to be multiplied for rotor teeth quantity O With tooth type G/3 to be multiplied for rotor teeth quantity Options O Hydraulic top link 65 x 35 x 280 cat. 2 for SSL/ST-150 and O Hydraulic top link 80 x 40 x 280 cat. 3 q.a. for SSL/DT-200, -225 and , O Roller SSL-150 cpl for depth adj. - without pushing frame 7, O Roller SSL-175 cpl for depth adj. - without pushing frame 8, O Roller SSL-200 cpl for depth adj. - without pushing frame 8, O Roller SSL-225 cpl for depth adj. - without pushing frame 9, O Roller SSL-250 cpl for depth adj. - without pushing frame 10, D O Guard frame for roller SSL-150 available only with roller 2, D O Guard frame for roller SSL-175 available only with roller 2, D O Guard frame for roller SSL-200 available only with roller 2, D O Guard frame for roller SSL-225 available only with roller 2, D O Guard frame for roller SSL-250 available only with roller 3, O PTO drive shaft W2600 K64 (without yoke) only for DT models W O Yoke for W2600 1"3/4 Z20 ASG - W O Yoke for W2600 1"3/4 Z6 ASG - W O Yoke for W2600 1"3/8 Z21 ASG - W O Yoke for W2600 1"3/8 Z6 ASG - Spare Parts K Tooth type B/ K Tooth type B/3/HD K Tooth type G/ Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black 1.31 Yokes PTO drive shaft W2500 K (without yoke) standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke 28 29

28 FORESTRY TILLERS SSL from 100 to 220 HP Ø 12 in max D 12 in FORESTRY TILLER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Friction clutch on side PTO PTO shaft with cam clutch Gearbox with freewheel Transmission with side gearbox Hydraulic rear hood Flat pressed welded steel counter-blades Anti dust machine body Inside lateral protections Protection chains MODEL min Engine (HP) max PTO (rpm) Working width Total width OPTIONS Hydraulic top link Hydraulic support roller Multiple tooth options Rotary hammers Two disc front plows Weight (Ibs) Max shredding diameter Max working depth No. teeth type B/3 + C/3/SS SSL SSL SSL SSL SSL Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. B/3 (standard) B/3/HD (option) G/3 (option) C/3/SS (side scraper)

29 PRICE LIST Part number Part description Notes Price $ SSL SSL/ST-150 Forestry tiller 49, SSL/ST-175 Forestry tiller 54, SSL/DT-200 Forestry tiller 70, SSL/DT-225 Forestry tiller 74, SSL/DT-250 Forestry tiller 78, Rotor equipped O With tooth type B/3/HD to be multiplied for rotor teeth quantity O With tooth type G/3 to be multiplied for rotor teeth quantity Options O Hydraulic top link 65 x 35 x 280 cat. 2 for SSL/ST-150 and O Hydraulic top link 80 x 40 x 280 cat. 3 q.a. for SSL/DT-200, -225 and , O Roller SSL-150 cpl for depth adjustment 7, O Roller SSL-175 cpl for depth adjustment 8, O Roller SSL-200 cpl for depth adjustment 8, O Roller SSL-225 cpl for depth adjustment 9, O Roller SSL-250 cpl for depth adjustment 10, O Front ploughshare discs discs to allow the soil penetration 1, O PTO drive shaft W2600 K64 (without yoke) W O Yoke for W2600 1"3/4 Z20 ASG - W O Yoke for W2600 1"3/4 Z6 ASG - W O Yoke for W2600 1"3/8 Z21 ASG - W O Yoke for W2600 1"3/8 Z6 ASG - Spare Parts K Tooth type B/ K Tooth type B/3/HD K Tooth type G/ Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black 1.31 Yokes PTO drive shaft W2500 K (without yoke) standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke 30 31

30 FORESTRY TILLERS SSM - SSM/HP from 150 to 300 HP Ø 20 in max D 16 in FORESTRY TILLER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Friction clutch on side PTO PTO shaft with cam clutch Gearbox with freewheel Transmission with side gearbox Hydraulic rear hood Welded steel counter-blades Flat pressed welded steel counter-blades Adjustable hardox counter-blade Anti dust machine body Centralized greasing hub Hydraulic top link MODEL min Engine (HP) max PTO (rpm) Working width Total width Z style self ranging system of the PTO drive shaft/gearbox Inside lateral protections Bigger transmission for tractors up to HP (SSM/HP 200, 225 and 250) Protection chains OPTIONS Adjustable counter-blade Bolted grid on rear hood W style self aligning device between PTO drive shaft/gearbox Dozing blade (not compatible with roller) Hydraulic controlled roller (not compatible with dozing blade) Multiple tooth options Weight (Ibs) Max shredding diameter Max working depth No. teeth type A/3 + MH SSM SSM SSM SSM/HP SSM/HP SSM/HP Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. A/3 (standard) A/3/HD (option) F/3 (option) MH (side scraper)

31 PRICE LIST Part number Part description Notes Price $ SSM SSM-200 Forestry tiller/soil stabilizer equipped with "Z" allignment + hy top link 96, SSM-225 Forestry tiller/soil stabilizer equipped with "Z" allignment + hy top link 100, SSM-250 Forestry tiller/soil stabilizer equipped with "Z" allignment + hy top link 104, SSM/HP SSM/HP-200 Forestry tiller/soil stabilizer equipped with "Z" allignment + hy top link 98, SSM/HP-225 Forestry tiller/soil stabilizer equipped with "Z" allignment + hy top link 102, SSM/HP-250 Forestry tiller/soil stabilizer equipped with "Z" allignment + hy top link 106, Rotor equipped O With tooth type A/3/HD to be multiplied for rotor teeth quantity O With tooth type F/3 to be multiplied for rotor teeth quantity Options O Roller SSM-200 Ø355 cpl for standard application 9, O Roller SSM-225 Ø355 cpl for standard application 9, O Roller SSM-250 Ø355 cpl for standard application 10, D O Roller SSM-200 Ø508 cpl for very muddy soil 9, D O Roller SSM-225 Ø508 cpl for very muddy soil 10, D O Roller SSM-250 Ø508 cpl for very muddy soil 10, O Dozing blade SSH-200 cpl in alternative to the roller # 2, O Dozing blade SSH-225 cpl in alternative to the roller # 2, O Dozing blade SSH-250 cpl in alternative to the roller # 2, D O Grid cpl for SSM-200 recommended to shred thin stumps 2, D O Grid cpl for SSM-225 recommended to shred thin stumps 3, D O Grid cpl for SSM-250 recommended to shred thin stumps 3, D O Counter blade forestry M/H-200 recommended to shred thin stumps 1, D O Counter blade forestry M/H-225 recommended to shred thin stumps 2, D O Counter blade forestry M/H-250 recommended to shred thin stumps 2, O "W" alignment kit for SSM 1, O "W" alignment kit for SSM/HP 1, Spare Parts K Tooth type A/ K Tooth type A/3/HD K Tooth type F/ Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Side scraper tooth type M-H left K Side scraper tooth type M-H right Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø Yokes PTO drive shaft W2600 K64 rif (without yoke) standard PTO - W O Yoke for W2600 1"3/4 Z6 ASG - W O Yoke for W2600 1"3/8 Z21 ASG - W O Yoke for W2600 1"3/8 Z6 ASG - 1" 3/4 Z20 standard yoke NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible. # EITHER DOZING BLADE OR ROLLER (NOT BOTH) 32 33

32 FORESTRY TILLERS SSH from 160 to 400 HP Ø28 in max D 20 in FORESTRY TILLER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Friction clutch on side PTO PTO shaft with cam clutch Gearbox with freewheel Transmission with side gearbox Hydraulic rear hood Flat pressed welded steel counter-blades Adjustable Hardox counter-blade Anti dust machine body Centralized greasing hub (SSH-200,225,250) Hydraulic top link (standard: SSH-200,225,250 - optional: SSH-150,175) Z style self ranging system of the PTO drive shaft/gearbox (SSH 200, 225 and 250) Inside lateral protection Protection chains OPTIONS Forestry counter-blade Bolted grid on rear hood (SSH 200, 225 and 250) Stronger HP transmission for tractors up to HP (SSH 200, 225 and 250)* W style self aligning device between PTO drive shaft/gearbox Dozing blade (not compatible with roller) Hydraulic controlled roller (not compatible with dozing blade) Multiple tooth options MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter Max working depth No. teeth type A/3 + MH SSH SSH SSH SSH SSH Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. A/3 (standard) A/3/HD (option) F/3 (option) MH (side scraper)

33 PRICE LIST Part number Part description Notes Price $ SSH SSH-150 Forestry tiller/soil stabilizer 97, SSH-175 Forestry tiller/soil stabilizer 104, SSH-200 Forestry tiller/soil stabilizer 106, SSH-225 Forestry tiller/soil stabilizer 108, SSH-250 Forestry tiller/soil stabilizer 115, Rotor equipped O With tooth type A/3/HD to be multiplied for rotor teeth quantity O With tooth type F/3 to be multiplied for rotor teeth quantity Options O Hydraulic top link 100 x 60 x 280 cat. 3-4 q.a. Only for SSH 150 and 175 1, O Hydraulic top link 120 x 60 x 250 cat. 3-4 q.a. (surcharge) Only for SSH , O Roller SSH-150 cpl in alternative to the dozing blade # 9, O Roller SSH-175 cpl in alternative to the dozing blade # 9, O Roller SSH-200 cpl in alternative to the dozing blade # 9, O Roller SSH-225 cpl in alternative to the dozing blade # 10, O Roller SSH-250 cpl in alternative to the dozing blade # 10, O Dozing blade SSH-150 cpl in alternative to the roller # 1, O Dozing blade SSH-175 cpl in alternative to the roller # 2, O Dozing blade SSH-200 cpl in alternative to the roller # 2, O Dozing blade SSH-225 cpl in alternative to the roller # 2, O Dozing blade SSH-250 cpl in alternative to the roller # 2, D O Counter blade forestry M/H-150 recommended to shred thin stumps 1, D O Counter blade forestry M/H-175 recommended to shred thin stumps 1, D O Counter blade forestry M/H-200 recommended to shred thin stumps 1, D O Counter blade forestry M/H-225 recommended to shred thin stumps 2, D O Counter blade forestry M/H-250 recommended to shred thin stumps 2, D O Grid cpl for SSH-200 recommended to shred thin stumps 2, D O Grid cpl for SSH-225 recommended to shred thin stumps 3, D O Grid cpl for SSH-250 recommended to shred thin stumps 3, D O Stronger transmission CV (with P700 1"3/4 Z20) * P700 and two W2600 on the sides 3, D O Stronger transmission CV (with P700 1"3/4 Z6) * P700 and two W2600 on the sides 3, O "W" alignment kit for SSH 1, Spare Parts K Tooth type A/ K Tooth type A/3/HD K Tooth type F/ Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Side scraper tooth type M-H left K Side scraper tooth type M-H right Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø Yokes PTO drive shaft W2600 K64 rif (without yoke) standard PTO - W O Yoke for W2600 1"3/4 Z6 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z21 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z6 AGCC with clamping cone - 1" 3/4 Z20 standard yoke * Only for SSH 200, 225 and 250 NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible. # EITHER DOZING BLADE OR ROLLER (NOT BOTH) 34 35

34 MULTITASKS SFL from 120 to 160 HP Ø 6 in max D 6 in STONE CRUSHER, FORESTRY TILLER AND MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Transmission with belts in Poly-Chain Carbon Hydraulic rear hood Welded steel counter-blades Adjustable Hardox counter-blade Inner anti wear clad plates FCP Anti dust machine body Inside lateral protections Double line protection chains OPTIONS Hydraulic top link Mechanical push frame Hydraulic push frame Dozing blade Grader blade (not compatible with roller) Hydraulic controlled roller (not compatible with dozing blade) MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter Max working depth No. teeth type STCL/3 + C/3/SS SFL * SFL * SFL * Data refers to the machine without options. The technical data in this catalogue may be altered without prior notice. *540 rpm for stone crushing 1000 rpm for mulching STCL/3 (standard) C/3/SS (side scraper)

35 PRICE LIST Part number Part description Notes Price $ SFL SFL-150 Universal mulcher and stone crusher 52, SFL-175 Universal mulcher and stone crusher 54, SFL-200 Universal mulcher and stone crusher 58, Options O Hydraulic top link 65 x 35 x 280 cat D O Guard frame SFL-150 mechanical guard frame 2, D O Guard frame SFL-175 mechanical guard frame 2, D O Guard frame SFL-200 mechanical guard frame 2, D O Attachment for optional SFL-150 required for mounting following options 4, D O Attachment for optional SFL-175 required for mounting following options 4, D O Attachment for optional SFL-200 required for mounting following options 4, D O Guard frame SFL/HY-150 hydraulic guard frame 1, D O Guard frame SFL/HY-175 hydraulic guard frame 1, D O Guard frame SFL/HY-200 hydraulic guard frame 1, D O Road kit SFL-150 grader + penetration skids 7, D O Road kit SFL-175 grader + penetration skids 7, D O Road kit SFL-200 grader + penetration skids 7, D O Roller SFL-150 cpl in alternative to the road kit 4, D O Roller SFL-175 cpl in alternative to the road kit 4, D O Roller SFL-200 cpl in alternative to the road kit 5, D O Dozing blade SFL-150 available with every optional D O Dozing blade SFL-175 available with every optional D O Dozing blade SFL-200 available with every optional Spare Parts K Tooth STCL/ K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=130) Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Belt Poly-chain 14M-68 carbon l= belts per unit 1, Yokes PTO drive shaft W2500 K standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke 36 37

36 NEW MULTITASKS SFM from 160 to 300 HP Ø8 in max (stones) Ø14 in max (trees) Ø18 in max (stump) STONE CRUSHER, FORESTRY TILLER AND MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. D 12 in All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Cam clutch on side pto PTO shaft with cam clutch Gearbox with freewheel Transmission with side gearbox Side gearbox with oil cooling system Hydraulic rear hood Forged and hardened interchangeable counter-blades Adjustable hardox counter-blade Inner anti wear clad plates FCP Interchangeable inner antiwear plates in Hardox Adjustable extended 3 point linkage Anti dust machine body Hydraulic top link Z style self ranging system of the PTO drive shaft/gearbox Hydraulic hoses integrated in the frame Cylinder protection Inside lateral protection Protection chains OPTIONS Hydraulically adjustable skids Bolted grid on rear hood W style self aligning device between PTO drive shaft/gearbox Hydraulic push frame Hydraulic support roller (two different style, D.36 cm - D. 51 cm) Bolt-on chains protection plates High Speed Transmission for SFM Rear dozing flap for SFM MODEL Engine Max shredding Working Total (HP) PDF Weight diameter width width (rpm) (Ibs) min max Stones Trees Stump Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. Max working depth No. teeth type F/3 + STC/3/FP SFM SFM SFM F/3 (standard) STC/3/FP (side scraper)

37 PRICE LIST Part number Part description Notes Price $ SFM SFM-200 Universal mulcher and stone crusher 98, SFM-225 Universal mulcher and stone crusher 103, SFM-250 Universal mulcher and stone crusher 107, Options D O Guard frame SFM/HY-200 hydraulic guard frame 8, D O Guard frame SFM/HY-225 hydraulic guard frame 8, D O Guard frame SFM/HY-250 hydraulic guard frame 8, D O Grid cpl for SFM-200 bolted under the hood-for finer mulching 2, D O Grid cpl for SFM-225 bolted under the hood-for finer mulching 3, D O Grid cpl for SFM-250 bolted under the hood-for finer mulching 3, D O Rear dozing flap for SFM-200 for a better output material dozing 2, D O Rear dozing flap for SFM-225 for a better output material dozing 2, D O Rear dozing flap for SFM-250 for a better output material dozing 2, D O Roller SFM-200 Ø355 cpl for standard application 8, D O Roller SFM-225 Ø355 cpl for standard application 8, D O Roller SFM-250 Ø355 cpl for standard application 9, D O Roller SFM-200 Ø508 cpl for very muddy soil 10, D O Roller SFM-225 Ø508 cpl for very muddy soil 10, D O Roller SFM-250 Ø508 cpl for very muddy soil 11, D O Hydraulic road skids SFH-200 not available with other options 8, D O Hydraulic road skids SFH-225 not available with other options 8, D O Hydraulic road skids SFH-250 not available with other options 8, D O Plate with screws for protection chains 32-7 links 8pc ( ) - 10pc (250) O Hydraulic top link 100 x 60 x 280 cat. 3-4 q.a. (surcharge) O High Speed Transmission for SFM O "W" alignment kit for SFM to enhance the movements 1, Spare Parts K Tooth type F/ Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Tooth STC/3/FP Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø Yokes PTO drive shaft W2600 K64 rif (without yoke) - W O Yoke for W2600 1"3/4 Z6 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z6 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z21 AGCC with clamping cone - 1" 3/4 Z20 standard yoke NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible

38 MULTITASKS SFH - SFH/HP from 300 to 500 HP Ø14 in max (stones) Ø18 in max (trees) Ø22 in max (stump) STONE CRUSHER, FORESTRY TILLER AND MULCHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. D 16 in All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft Friction clutch on side PTO Gearbox with freewheel Gearbox with oil cooling system (SFH/HP) Transmission with side gearbox Side gearbox with oil cooling system Hydraulic rear hood Forged and hardened interchangeable counter-blades Third row of interchangeable forged and hardened counter-blades Adjustable Hardox counter-blade Inner anti wear clad plates FCP Adjustable extended 3 point linkage Anti dust machine body Centralized greasing hub Hydraulic top link Z style self ranging system of the PTO drive shaft/gearbox Hydraulic hoses integrated in the frame Cylinder protection Inside lateral protection Screwed protection chains OPTIONS Hydraulically adjustable skids Bolted grid on rear hood W style self aligning device between PTO drive shaft/gearbox Hydraulic support roller MODEL Engine Max shredding Working (HP) PTO Total width Weight diameter width (rpm) (Ibs) min max Stones Trees Stump Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. Max working depth No. teeth type G/3 + STC/3/FP + STC/FP SFH SFH SFH/HP SFH/HP G/3 (standard) STC/3/FP (side scraper) STC/FP (side scraper)

39 PRICE LIST Part number Part description Notes Price $ SFH SFH-225 Universal mulcher and stone crusher 134, SFH-250 Universal mulcher and stone crusher 136, SFH/HP SFH/HP-225 Universal mulcher and stone crusher 139, SFH/HP-250 Universal mulcher and stone crusher 142, Options D O Roller SFH-225 cpl for depth adjustment 11, D O Roller SFH-250 cpl for depth adjustment 11, D O Grid cpl for SFH-225 bolted under the hood-for finer mulching 3, D O Grid cpl for SFH-250 bolted under the hood-for finer mulching 3, D O Hydraulic road skids SFH-225 material retaining side skids 9, D O Hydraulic road skids SFH-250 material retaining side skids 9, O "W" alignment kit for SFH Improve PTO angle when adjusting 1, O "W" alignment kit for SFH/HP Improve PTO angle when adjusting 1, O Hydraulic top link 120 x 60 x 250 cat. 3-4 q.a. (surcharge) 1, Spare parts K Tooth type G/ Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth STC/3/FP K Tooth STC/FP 1 screw Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø D Chain flap section 32-9 links l= Hex head set screw UNI 5739 M16 x zn Flat washer UNI 6592 Ø16 zn Spring washer UNI 9195 Ø16 zn Nylock lock nut UNI 7473 M16 10 zn 1.21 PTO drive shafts for SFH PTO drive shaft Walterscheid P700 1"3/4 Z standard PTO O PTO drive shaft Walterscheid P700 1"3/4 Z PTO drive shafts for SFH/HP PTO drive shaft Walterscheid P700 1"3/4 Z20 (gearbox 2"1/4 Z22) standard PTO O PTO drive shaft Walterscheid P700 2"1/4 Z22 (gearbox 2"1/4 Z22) O PTO drive shaft Walterscheid P700 1"3/4 Z6 (gearbox 2"1/4 Z22) - NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible

40 STONE CRUSHER STCL from 80 to 150 HP Ø 6 in max (stones) P 6 in STONE CRUSHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. STANDARD EQUIPMENT OPTIONS PTO shaft with cam clutch Possibility to choose Transmission 540/1000 rpm Gearbox with freewheel Choice between 540 and 1000 rpm transmission (STC 125) Transmission with belts Poly-Chain Carbon Adjustable extended 3 point linkage (STCL/ST) Hydraulic rear hood Hydraulic top link Flat pressed welded steel counter-blades Dozing blade Adjustable Hardox counter-blade Grader blade Penetration skids Anti dust machine body All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. Inside lateral protection Double line protection chains MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter Max working depth No. teeth type STCL/3 + C/3/SS STCL * 540 o STCL * 540 o STCL * 540 o STCL * 540 o STCL/DT STCL/DT Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. *For 540 rpm tractors, max. power 100 HP. STCL/3 (standard) C/3/SS (side scraper)

41 PRICE LIST Part number Part description Notes Price $ STCL STCL/ST-100 Stone crusher 540 rpm 40, STCL/ST-100 Stone crusher 40, STCL/ST-125 Stone crusher 540 rpm 41, STCL/ST-125 Stone crusher 41, STCL/ST-150 Stone crusher 540 rpm 43, STCL/ST-150 Stone crusher 43, STCL/ST-175 Stone crusher 540 rpm 46, STCL/ST-175 Stone crusher 46, STCL/DT-175 Stone crusher 51, STCL/DT-200 Stone crusher 56, Options O Hydraulic top link 65 x 35 x 280 cat D O Dozing blade STCL D O Dozing blade STCL D O Dozing blade STCL D O Dozing blade STCL D O Dozing blade STCL-200 1, O PTO lifting kit for STCL Rec. for high PTO tractors ( ) O PTO lowering kit for STCL Rec. for low PTO tractors ( ) O Longer attachment kit for STCL For tractors with short 3 point linkage Spare Parts K Tooth STCL/ K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=120) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Belt Poly-chain 14M-68 carbon l= belt per unit 1, Belt Poly-chain 14M-68 carbon l= belts per unit - for DT version 1, Yoke for 540 RPM machines (W2400) PTO drive shaft W2400 K64 rif standard PTO - 1" 3/8 Z6 standard yoke W O Yoke for W2400 1"3/8 Z21 ASGE - Yokes for 1000 RPM machines (W2500) PTO drive shaft W2500 K (without yoke) standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke 43 43

42 STONE CRUSHER STC from 80 to 220 HP Ø 12 in max (stones) P 8 in STONE CRUSHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft with cam clutch Gearbox with freewheel Transmission with belts in Poly-V L Hydraulic rear hood Flat pressed welded steel counter-blades Adjustable Hardox counter-blade Adjustable skids Penetration skids Anti dust machine body (STC/DT) Inside lateral protection Double line protection chains OPTIONS Choice between 540 and 1000 rpm transmission (STC 125) Hydraulic top link Dozing blade Grader blade (STC/DT) Multiple tooth options MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter Max working depth No. teeth type STC/3 + STC/3/HD STC o STC/DT STC/DT STC/DT Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. STC/3 (standard) STC/3/HD (option) STC/3/FP (option) STC/3/HD (side scraper)

43 PRICE LIST Part number Part description Notes Price $ STC STC/ST-125 Stone Crusher 45, STC/DT-150 Stone Crusher 64, STC/DT-150 Stone Crusher - extended linkage 64, STC/DT-175 Stone Crusher 68, STC/DT-200 Stone Crusher 72, Rotor equipped O With tooth STC/3/HD to be multiplied for rotor teeth quantity O With tooth type STC/3/FP to be multiplied for rotor teeth quantity Options O Hydraulic top link 65 x 35 x 280 cat. 2 for STC O Hydraulic top link 80 x 40 x 280 cat. 3 q.a. for STC-150, -175 and , O Dozing blade STC-125 cpl O Dozing blade STC-150 cpl O Dozing blade STC-175 cpl O Dozing blade STC-200 cpl D O Plug & Play dozing and grader blades kit for STC , D O Plug & Play dozing and grader blades kit for STC , D O Plug & Play dozing and grader blades kit for STC , Spare Parts K Tooth STC/ K Tooth STC/3/HD K Tooth STC/3/FP Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø D Front penetration plough STC skid right 1, D Front penetration plough STC skid left 1, D Skid wearing plate STC universal Belt Poly-V L kevlar l=1842 for STC belts per unit Belt Poly-V L kevlar l=1943 for STC 150, 175, belts PTO drive shafts and yokes PTO drive shaft W2500 K (without yoke) standard PTO - W O Yoke for W2500 1"3/4 Z20 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/8 Z21 ASG - 1" 3/8 Z6 standard yoke 44 45

44 STONE CRUSHER STCH - STCH/HD from 180 to 300 HP Ø 20 in max (stones) P 10 in STONE CRUSHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft (STCH/HD) Cam clutch on side PTO (STCH/HD) PTO shaft with cam clutch (STCH) Gearbox with freewheel Transmission with belts in XPC Hydraulic rear hood Flat pressed welded steel counter-blades Adjustable Hardox counter-blade Inner anti wear clad plates FCP (STCH/HD) Adjustable skids MODEL Penetration skids Adjustable extended 3 point linkage (STCH/HD) Anti dust machine body Inside lateral protection Double line Protection chains OPTIONS Hydraulic top link Dozing blade Grader blade Multiple tooth options (STCH/HD: STC/3/HD tools standard) Engine Working Total Max shredding Max (HP) PTO Weight No. teeth type width width diameter working depth (rpm) (Ibs) min max STC/3 STC/3/HD STCH STCH STCH STCH/HD / 62 STCH/HD / 70 Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. STC/3 (standard) STC/3/HD (option) STC/3/FP (option) STC/3/HD (side scraper)

45 PRICE LIST Part number Part description Notes Price $ STCH STCH-200 Stone crusher 98, STCH-225 Stone crusher 101, STCH-250 Stone crusher 108, STCH/HD STCH/HD-225 Heavy Duty Stone crusher 116, STCH/HD-250 Heavy Duty Stone crusher 121, Rotor equipped O With tooth STC/3/HD to be multiplied for rotor teeth quantity O With tooth type STC/3/FP to be multiplied for rotor teeth quantity Options O Hydraulic top link 100 x 60 x 280 cat. 3-4 q.a. 1, O Dozing blade STCH-200 cpl 1, O Dozing blade STCH-225 cpl 1, O Dozing blade STCH-250 cpl 1, O Dozing and grader blades kit for STCH , O Dozing and grader blades kit for STCH , O Dozing and grader blades kit for , Spare Parts K Tooth STC/ K Tooth STC/3/HD K Tooth STC/3/FP Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø D Front penetration plough STC skid right 1, D Front penetration plough STC skid left 1, D Skid wearing plate STCH universal Belt XPC Gates Quad Power l=2500 kevlar 10 belts per unit Yokes for STCH PTO drive shaft W2600 K64 rif (without yoke) standard PTO - W O Yoke for W2600 1"3/4 Z6 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z21 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z6 AGCC with clamping cone - 1" 3/4 Z20 standard yoke PTO Shaft for STCH/HD O PTO drive shaft Walterscheid P700 1"3/4 Z PTO drive shaft Walterscheid P700 1"3/4 Z standard PTO

46 STONE CRUSHER RSM from 180 to 360 HP Ø 20 in max (stones) P 15 in STONE CRUSHER FOR PTO TRACTORS WITH FIXED TOOTH ROTOR. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Cam clutch on side PTO PTO shaft with cam clutch Gearbox with freewheel Transmission with side gearbox Hydraulic rear hood Adjustable hardox counter-blade Interchangeable steel counter-blades in Hardox Interchangeable inner antiwear plates in Hardox Anti dust machine body Inside lateral protection Protection chains OPTIONS PTO shaft Bolted grid on rear hood Hydraulic top link Dozing blade Hydraulic support roller Water spray system Multiple tooth options Stronger transmission for tractors up to 360HP MODEL min Engine (HP) max PTO (rpm) Working width Total width Weight (Ibs) Max shredding diameter Max working depth R+R/HD+ STC/3/FP + STC/FP No. teeth type G/3+STC/3/FP +STC/FP RSM RSM RSM R 65 (standard) R/HD 65 (option) R 44 (option) G/3 (option) G/3/R 44 (option) STC/3/FP (side scraper) STC/FP (side scraper)

47 PRICE LIST Part number Part description Notes Price $ RSM RSM-175 Shredder 122, RSM-200 Shredder 126, RSM-225 Shredder 129, Rotor equipped O With tooth type R/HD 65 to be multiplied for rotor teeth quantity Machine equipped D O With rotor RSM-175 type G/3 - D O With rotor RSM-200 type G/3 - D O With rotor RSM-225 type G/3 - Options O Hydraulic top link 100 x 60 x 280 cat. 3-4 q.a. 1, D O Grid for RSM-175 3, D O Grid for RSM-200 3, D O Grid for RSM-225 3, O Dozing blade STCH-175 cpl 1, O Dozing blade STCH-200 cpl 1, O Dozing blade STCH-225 cpl 1, D O Roller RSM-175 cpl 11, D O Roller RSM-200 cpl 12, D O Roller RSM-225 cpl 12, D O Stronger transmission CV (with P700 1"3/4 Z20) 3, Spare Parts K Tooth type R K Tooth type R/HD D Bushing type R Ø external conical 50 - Ø internal D Tooth holder type R D Tooth holder for side scraper tooth type R 812 left D Tooth holder for side scraper tooth type R 812 right K Tooth type G/ Hex socket head cap screw UNI 5932 M24 x 2 x black K Tooth STC/3/FP Hex socket head cap screw UNI 5932 M24 x 2 x black K Tooth STC/FP 1 screw Hex socket head cap screw UNI 5932 M24 x 2 x black D Protection for rotor flange RSM-MTM Spring washer UNI 9195 Ø16 zn Hex head set screw UNI 5739 M16 x zn 1.67 PTO drive shafts and yokes PTO drive shaft W2600 K64 rif (without yoke) standard PTO - 1" 3/4 Z20 standard yoke W O Yoke for W2600 1"3/4 Z6 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z21 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z6 AGCC with clamping cone

48 LAND CLEARING HYDRAULIC DRIVEN HEADS When road work requires the use of special machines, excavators or skid steers, the solutions to look for are hydraulic tillers, mulchers, stump cutters and rock crushers. These utilize the hydraulic system of the machine they are attached to for rotor movement. When choosing the right model from the FAE line up, you must consider the power of the machine, terrain type and the desired result to guarantee a satisfactory job. Our forestry machines, manufactured with high quality materials, are known for their robustness and reliability. EFFICIENCY The quality of the work is guaranteed even under terrain or environmental conditions that are extreme. SOLIDITY The quality of the materials and the technological development guarantee maximum reliability and toughness over time. SAFETY Our wide range of machines to choose from mean you can pair our attachment with your carrier and it will perform to the level of power and type of terrain operating on.

49 RESEARCHED, DESIGNED AND CREATED FOR YOU 48 51

50 MULCHERS FOR SKID STEERS PMM/SSL from 60 to 100 HP Ø 3 in max BRUSH MULCHER WITH HAMMER/FLAIL ROTOR FOR SKID STEERS. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Anti dust machine body Belt transmission Quick attachment plate with self levelling device for skid steer 32/65cc variable manual displacement hydraulic piston motor with relief and anticavitation valve Welded counter blade Self cleaning rear roller with integrated skids Attachment plate with self levelling device Self leveling protection rubber Possibillity to have the rotor equipped with PML hammers or Y-flails OPTIONS Stronger bearing for back roller Multiple tooth options MODEL Engine Flow rate Pressure No. teeth hammers Max shredding (HP) (gal/min) (PSI) Working Total width Weight flails diameter width (Ibs) min max min max min max PMM Y PMM/SSL PMM/SSL PMM/SSL Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. *Variable displacement hydraulic motor. Hammer PMM (standard) Hammer Y/3 (option)

51 PRICE LIST Part number Part description Notes Price $ PMM/SSL PMM/SSL-150 Light Duty Mulcher for skid steer 18, PMM/SSL-175 Light Duty Mulcher for skid steer 18, PMM/SSL-200 Light Duty Mulcher for skid steer 18, Rotor equipped O With "Y" blade PMM to be multiplied for rotor hammers quantity - Options O Heavy duty roller support PMM O Hydraulic couplers with nipples for 3 hoses Spare Parts Hammer PMM "Y" blades kit PMM with washers Hex head set screw UNI 5712 M18 x black (wrench 30 mm) Nylock lock nut UNI 7473 M18 10 zn Belt XPB Gates Quad Power l= belts per unit * Please, contact us for further details. NOTE: special order, longer delivery time

52 MULCHERS FOR SKID STEERS DML/SSL - DML/SSL/VT from 40 to 90 HP Ø 5 in max FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR SKID STEERS. STANDARD EQUIPMENT Anti dust machine body Belt transmission 17/34cc variable manual displacement hydraulic piston motor with relief and anticavitation valve (DML/SSL) - (13-26 GPM) Pushing frame Diverter valve (plug & play) Motor integrated into the frame All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. 55/38cc variable torque hydraulic piston motor (DML/SSL/VT) - (24-30 GPM) Hydraulic hoses Hydraulic rear hood Welded counter blade Working pressure control gauge OPTIONS Customized setting hydraulic motor (DML/SSL/VT) 32/65cc variable manual displacement hydraulic piston motor with relief and anticavitation valve (DML/SSL) - (24-34 GPM) Hydraulic couplers Electrical connector MODEL Engine (HP) Flow rate (gal/min) Pressure (PSI) min max min max min max Working width Total width Weight (Ibs) Max shredding diameter No. blades type E DML/SSL DML/SSL DML/SSL DML/SSL/VT 150* DML/SSL/VT 175* Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. *Variable displacement hydraulic motor. Blade E (standard) Blade E/HD (option)

53 PRICE LIST Part number Part description Notes Price $ DML/SSL DML/SSL-125 Universal forestry mulcher for skid steer 20, DML/SSL-150 Universal forestry mulcher for skid steer 20, DML/SSL-175 Universal forestry mulcher for skid steer 21, DML/SSL/VT DML/SSL-125 VT Universal forestry mulcher for skid steer 22, DML/SSL-150 VT Universal forestry mulcher for skid steer 23, DML/SSL-175 VT Universal forestry mulcher for skid steer 23, Options O With blade type E/HD O Motor with extension shaft BYPY variable 65/32cc. for DML/SSL From 24 GPM to 34 GPM O Diverter valve 24V for DML/SSL instead of the 12V standard valve O Connector F Deutsch HD PN special plug* 8 pins O Connector F Deutsch HD PN special plug* 14 pins O Customized setting hydraulic motor Rexroth variable 55 for DML/SSL to optimize the mulcher performance O Hydraulic couplers with nipples for 3 hoses DML/SSL Spare Parts Blade type E Blade type E/HD Hex socket head cap screw UNI 5932 M14 x 1,5 x black Electric cable M Deutsch 4 poles - 2 x F Deutsch 2 poles l=3,8m Hydraulic couplers with nipples for 3 hoses DML/SSL Belt XPB Gates Quad Power l= belts per unit * Please, contact us for further details

54 MULCHERS FOR SKID STEERS UML/SSL/VT from 75 to 120 HP Ø 8 in max FORESTRY MULCHER WITH FIXED TOOTH ROTOR FOR SKID STEERS. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Anti dust machine body Belt transmission 110/60cc variable torque hydraulic piston motor - (34-53 GPM) Hydraulic hoses Hydraulic rear hood Adjustable skids Welded counter blade Working pressure control gauge Pushing frame Double line protection chains Anti-dust rear hood Motor integrated into the frame OPTIONS Customized setting hydraulic motor Diverter valve Oil cooler kit (roof mount or internal) Hydraulic couplers Electrical connector Multiple tooth options MODEL Engine Flow rate Pressure Working Total Max shredding (HP) (gal/min) (PSI) Weight No. teeth type width width (Ibs) diameter min max min max min max C/3+C/3/SS I+C/3/SS UML/SSL/VT 150* UML/SSL/VT 175* Data refers to machine as standard. The technical data in this catalogue may be altered without prior notice. *Variable displacement hydraulic motor. C/3 (standard) C/3/HD (option) Blade C/3 (option) K (option) I (option) C/3/SS (side scraper)

55 PRICE LIST Part number Part description Notes Price $ UML/SSL/VT UML/SSL-125 VT Universal forestry mulcher for skid steer with push-frame UML/SSL-150 VT Universal forestry mulcher for skid steer with push-frame UML/SSL-175 VT Universal forestry mulcher for skid steer with push-frame Machine equipped 30, , , D O With rotor UML/ST-125 Ø220 type I 1, D O With rotor UML/ST-150 Ø220 type I 1, D O With rotor UML/ST-175 Ø220 type I 2, Rotor equipped O With tooth-blade type C/3 to be multiplied for rotor teeth quantity O With tooth type C/3/HD to be multiplied for rotor teeth quantity O With tooth type K to be multiplied for rotor teeth quantity Options Roof Mounted Hydraulic Cooler mounting hardware and external plumbing not included 4, O Kit diverter valve 12V for U-FML/SSL includes electrical cable O Oil cooler kit for U-FML/SSL-125 in-shell cooler 2, O Oil cooler kit for U-FML/SSL-150 in-shell cooler 2, O Oil cooler kit for U-FML/SSL-175 in-shell cooler 2, O Connector F Deutsch HD PN O Connector F Deutsch HD PN O Hydraulic couplers with nipples for 3 hoses for Case O Hydraulic couplers with nipples for 5 hoses O Hydraulic couplers with nipples for 3 hoses Spare Parts K Tooth type C/ K Tooth type C/3/HD Blade adaptor C/ Blade type C/ K Tooth type I Only used on type I rotor K Tooth type K Only used on type I rotor K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=120) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Diverter valve for antishock valve 1" (without coils) Electric cable M Deutsch 4 poles - 2 x F Deutsch 2 poles l=3,8m Connector F Deutsch HD PN Connector F Deutsch HD PN Hydraulic couplers with nipples for 5 hoses Hydraulic couplers with nipples for 3 hoses Belt Poly-chain 14M-68 carbon l=1568 belt for UML/SSL/VT - 1 belt per unit 1,

56 NEW MULCHERS FOR SKID STEERS UML/SSL/VT/BL from 75 to 120 HP Ø 8 in max FORESTRY MULCHER WITH BITE LIMITER ROTOR SYSTEM. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Anti dust machine body Belt transmission 110/60cc variable torque hydraulic piston motor - (34-53 GPM) Hydraulic hoses Hydraulic rear hood Adjustable skids Welded counter blade Working pressure control gauge Pushing frame Double line protection chains Anti-dust rear hood Motor integrated into the frame With rotor Bite Limiter dedicated rear hood OPTIONS Customized setting hydraulic motor Oil cooler kit (roof mount or internal) Hydraulic couplers MODEL Engine Flow rate Pressure Total Max (HP) (gal/min) (PSI) Working Weight No. teeth type shredding width width (Ibs) diameter min max min max min max Blade C/3+C/3/SS UML/SSL/VT/BL 125* UML/SSL/VT/BL 150* UML/SSL/VT/BL 175* Blade C/3 (standard) C/3/SS (side scraper)

57 PRICE LIST Part number Part description Notes Price $ UML/SSL/VT/BL UML/SSL-125 VT BL Universal forestry mulcher for skid steer with push-frame - Bite Limiter UML/SSL-150 VT BL Universal forestry mulcher for skid steer with push-frame - Bite Limiter UML/SSL-175 VT BL Universal forestry mulcher for skid steer with push-frame - Bite Limiter Options 31, , , Roof Mounted Hydraulic Cooler mounting hardware and external plumbing not included 4, O Oil cooler kit for U-FML/SSL-125 in-shell cooler 2.600, O Oil cooler kit for U-FML/SSL-150 in-shell cooler 2.600, O Oil cooler kit for U-FML/SSL-175 in-shell cooler 2.600, O Hydraulic couplers with nipples for 3 hoses for Case 535, O Hydraulic couplers with nipples for 3 hoses 535,00 Spare Parts K Tooth type C/ K Tooth type C/3/HD Blade adaptor C/ Blade type C/ K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=120) composed by screw, washer & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Hydraulic couplers with nipples for 3 hoses Belt Poly-chain 14M-68 carbon l=1568 belt for UML/SSL/VT - 1 belt per unit 1,

58 STONE CRUSHERS FOR SKID STEER LOADERS STC/SSL from 80 to 120 HP D 6 in STONE CRUSHERS FOR SKID STEER LOADERS All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Hydraulic piston motor 125cc with relief and anticavitation valve Adjustable hardox counter-blade Inner hydraulic dozing hood with adjustable cylinder for better output material regulation Penetration skids Working pressure control gauge Hydraulic hoses Hydraulic top link OPTIONAL Diverter valve Hydraulic couplers Electrical connector MODEL Power HP (CV) Requirements Flow gal/min Pressure PSI min max min max min max Working width Total width Weight (Ibs) Working depth Teeth q.ty type STCL/3 + C/3/SS STC/SSL STC/SSL This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice. STCL/3 (standard) C/3/SS (side scraper)

59 PRICE LIST Part number Part description Notes Price $ STC/SSL STC/SSL-125 Stone crusher for skid steer 43, STC/SSL-150 Stone crusher for skid steer 44, Options O Hydraulic couplers with nipples for 5 hoses O Hydraulic couplers with nipples for 3 hoses O Hydraulic couplers with nipples for 3 hoses for Case O Kit diverter valve 12V includes electrical cable O Connector F Deutsch HD PN Spare Parts K Tooth STCL/ K Side scraper tooth type C/3/SS right K Side scraper tooth type C/3/SS left D C/3 tooth fixing kit (screw l=120) composed by screw, schnorr & nut Screw C/3 M20 x 1,5 x black Schnorr anti vibration washer Ø20 HS High hex nut UNI 5587 M20 x 1,5 10 black Diverter valve for antishock valve 1" (without coils) Electric cable M Deutsch 4 poles - 2 x F Deutsch 2 poles l=3,8m Connector F Deutsch HD PN Hydraulic couplers with nipples for 5 hoses Hydraulic couplers with nipples for 3 hoses Belt Poly-chain 14M-68 carbon l= belt per unit 1, * Please, contact us for further details

60 FAE USA 2018 PRICE LIST CONSTRUCTION EQUIPMENT

61 004 CONSTRUCTION PTO DRIVEN HEADS MULTITASK 006 RSL 008 MTL - NEW 010 MTM - MTM/HP 012 MTH 014 STABILIZATION 014 SSH 016 STABI/H 018 CONSTRUCTION HYDRAULIC DRIVEN HEADS CRUSHERS 020 STC/SSL

62 CONSTRUCTION Our Construction line machines bring the very latest technology to road work, making your job easier, even in the most difficult conditions. Our leading-edge engineering research brings you a range of versatile, functional machinery that is reliable and efficient, able to speed up and simplify the main jobs in the construction and development of roads, highways and other infrastructure works. PRACTICAL The heads hook up to the tractor via a three-point hitch for quick and easy movement; The tractor s PTO serves to operate the head. MANEUVERABILITY The compactness of the machines allows them to work in restricted spaces, corners and areas that are hard to access. EFFECTIVE The quality of the materials, together with the high-tech, innovative content guarantee top-level performance for all uses.

63 OPENING DOORS TO TOP-NOTCH TECHNOLOGICAL EVOLUTION FOR ROAD CONSTRUCTION 110 5

64 MULTITASK RSL from 80 to 190 HP D 11 in ROCK GRINDER, STABILIZER, STONE CRUSHER AND ASPHALT SHREDDER FOR PTO TRACTORS. STANDARD EQUIPMENT Anti dust machine body Friction clutch on side PTO Bolted grid on rear hood PTO shaft with cam clutch Inside lateral protection Gearbox with freewheel Transmission with side gearbox Hydraulic rear hood Flat pressed welded steel counter-blades OPTIONS Extended 3 point linkage Hydraulic top link All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. Interchangeable inner antiwear plates in Hardox Hydraulically adjustable skids MODEL Tractor (min/max) PTO (rpm) Working width Total width Weight (Ibs) Water spray system Multiple tooth options Working depth ROTOR G/3 No. teeth/type G/3 +STC/3/FP Working depth Max. 1 Max. 2 Max. 1 Max. 2 ROTOR R No. teeth /type R + R/HD RSL RSL RSL RSL / DT RSL / DT RSL / DT Max.1: with rotor only Max.2: maximum depth (maximum working depth depending on ground conditions) This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice. R 65 (standard) R/HD 65 (option) R 44 (option) G/3 (option) G/3/R 44 (option) R/HD 65 (side scraper) STC/3/FP (side scraper)

65 PRICE LIST Part number Part description Notes Price $ RSL RSL/ST-100 Shredder 540 rpm for slab, stones and asphalt 54, RSL/ST-125 Shredder 540 rpm for slab, stones and asphalt 57, RSL/ST-150 Shredder 540 rpm for slab, stones and asphalt 60, RSL/DT-175 Shredder for slab, stones and asphalt 76, RSL/DT-200 Shredder for slab, stones and asphalt 82, RSL/DT-225 Shredder for slab, stones and asphalt 88, Rotor equipped O With tooth type R/HD 65 to be multiplied for rotor teeth quantity O With tooth type R adaptor R to be multiplied for rotor teeth quantity Machine equipped D O With rotor RSL/ST-100 type G/3 for stones, stumps, roots, stabilizing - D O With rotor RSL/ST-100 type G/3/R 44 for stabilizing and asphalt - D O With rotor RSL/ST-125 type G/3 for stones, stumps, roots, stabilizing - D O With rotor RSL/ST-125 type G/3/R 44 for stabilizing and asphalt - D O With rotor RSL/ST-150 type G/3 for stones, stumps, roots, stabilizing - D O With rotor RSL/ST-150 type G/3/R 44 for stabilizing and asphalt - D O With rotor RSL/DT-175 type G/3 for stones, stumps, roots, stabilizing - D O With rotor RSL/DT-175 type G/3/R 44 for stabilizing and asphalt - D O With rotor RSL/DT-200 type G/3 for stones, stumps, roots, stabilizing - D O With rotor RSL/DT-200 type G/3/R 44 for stabilizing and asphalt - D O With rotor RSL/DT-225 type G/3 for stones, stumps, roots, stabilizing - D O With rotor RSL/DT-225 type G/3/R 44 for stabilizing and asphalt - Options O Hydraulic top link 65 x 35 x 280 cat O Hydraulic top link 80 x 40 x 280 cat. 3 q.a. 1, D O Plate with screws for protection chains RSL single price for each protection piece O Water spray system for RSL-100 7, O Water spray system for RSL-125 7, O Water spray system for RSL-150 7, O Water spray system for RSL/DT-175 7, D O Water spray system for RSL/DT-175 high flow stronger water flow version 13, O Water spray system for RSL/DT-200 7, D O Water spray system for RSL/DT-200 high flow stronger water flow version 13, O Water spray system for RSL/DT-225 7, D O Water spray system for RSL/DT-225 high flow stronger water flow version 13, D O Extended three point linkage kit for RSL available only for RSL , Spare Parts K Tooth type R K Tooth type R/HD D Bushing type R Ø external conical 45 - Ø internal Snap ring DIN 471 Ø045 x 2,5 Bushing fixing ring 2.54 D Spring ring Ø30 Ring fixing tooth type R Tooth adaptor type R Adapter for tooth R K Tooth type R Tooth R44 suitable for asphalt K Tooth type G/ K Tooth adaptor type G/3-22 Adapter type G/ K Tooth type R Tooth R44 suitable for asphalt Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth type R/HD D Bushing type R Ø external conical 45 - Ø internal Snap ring DIN 471 Ø045 x 2,5 Bushing fixing ring 2.54 D Spring ring Ø30 Ring fixing tooth type R 3.41 Yokes PTO drive shaft W2500 K (without yoke) standard PTO - W O Yoke for W2500 1"3/8 Z21 ASG - W O Yoke for W2500 1"3/4 Z6 ASG - W O Yoke for W2500 1"3/4 Z20 ASG - 1" 3/4 Z20 standard yoke 6 7

66 NEW MULTITASK MTL from 140 to 240 HP D 11 in ROCK GRINDER, STABILIZER, STONE CRUSHER AND ASPHALT SHREDDER FOR PTO TRACTORS. STANDARD EQUIPMENT Bolted grid on rear hood Friction clutch on side PTO Inside lateral protection PTO shaft with cam clutch Protection chains Gearbox with freewheel Transmission with side gearbox Hydraulic rear hood OPTIONS Adjustable hardox counter-blade Hydraulic top link Interchangeable inner antiwear plates in Hardox Water spray system All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. Anti dust machine body Variable crushing chamber Multiple tooth options Bolt-on chains protection plates ROTOR G/3 ROTOR R (optional) MODEL Tractor (min/max) PTO (rpm) Working width Total width Weight (Ibs) Working depth No. teeth/type G/3 +STC/3/FP Working depth Max. 1 Max. 2 Max. 1 Max. 2 No. teeth /type R + R/HD MTL MTL MTL MTL Max.1: with rotor only Max.2: maximum depth (maximum working depth depending on ground conditions) This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice. G/3 (standard) R 65 (option) R/HD 65 (option) R 44 (option) G/3/R 44 (option) STC/3/FP (side scraper) R/HD 65 (side scraper)

67 PRICE LIST Part number Part description Notes Price $ MTL MTL-150 Shredder for slab, stones and asphalt 102, MTL-175 Shredder for slab, stones and asphalt 106, MTL-200 Shredder for slab, stones and asphalt 110, MTL-225 Shredder for slab, stones and asphalt 114, Options O Hydraulic top link 100 x 60 x 280 cat. 3-4 q.a. 1, D O Graduated rods MTL in inches - D O Water spray system for MTL-150 Basic system of the water flow control 7, D O Water spray system for MTL-175 Basic system of the water flow control 7, D O Water spray system for MTL-200 Basic system of the water flow control 8, D O Water spray system for MTL-225 Basic system of the water flow control 8, D O Water spray system for MTL-150 high flow High flow water control system 12, D O Water spray system for MTL-175 high flow High flow water control system 13, D O Water spray system for MTL-200 high flow High flow water control system 13, D O Water spray system for MTL-225 high flow High flow water control system 13, Spare Parts K Tooth type G/ K Tooth adaptor type G/3-22 Adapter type G/ K Tooth type R Tooth R44 suitable for asphalt Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth STC/3/FP Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø D Chain flap section 28-6 links l= D Chain flap section 28-6 links l= Hex head set screw UNI 5739 M16 x zn Spring washer UNI 9195 Ø16 zn Flat washer UNI 6592 Ø16 zn Brass nozzle GAS 3/8" 40 l/min standard nozzle 8.97 Yokes PTO drive shaft W2600 K64 rif (without yoke) standard PTO - W O Yoke for W2600 1"3/4 Z6 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z21 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z6 AGCC with clamping cone - 1" 3/4 Z20 standard yoke 8 9

68 MULTITASK MTM - MTM/HP from 240 TO 360 HP D 16 in ROCK GRINDER, STABILIZER, STONE CRUSHER AND ASPHALT SHREDDER FOR PTO TRACTORS. STANDARD EQUIPMENT Variable crushing chamber PTO shaft with cam clutch Bolted grid on rear hood Friction clutch on side PTO Inside lateral protection Gearbox with freewheel Transmission with side gearbox Hydraulic front hood OPTIONS Hydraulic rear hood PTO shaft P700 for HP version Adjustable hardox counter-blade Hydraulic top link All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. Interchangeable inner antiwear plates in Hardox Adjustable skids Anti dust machine body Water spray system FCS full control system Multiple tooth options ROTOR G/3 ROTOR R MODEL Tractor (min/max) PTO (rpm) Working width Total width Weight (Ibs) Working depth No. teeth/type G/3 + STC/3/FP + STC/FP Working depth Max. 1 Max. 2 Max. 1 Max. 2 No. teeth /type R + R/HD + STC/3/FP + STC/FP MTM MTM MTM/HP MTM/HP Max.1: with rotor only Max.2: maximum depth (maximum working depth depending on ground conditions) This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice. R 65 (standard) R/HD 65 (option) R 44 (option) G/3 (option) G/3/R 44 (option) STC/3/FP (side scraper) STC/FP (side scraper)

69 PRICE LIST Part number Part description Notes Price $ MTM MTM-200 Shredder for slab, stones and asphalt 154, MTM-225 Shredder for slab, stones and asphalt 161, MTM/HP MTM/HP-200 Shredder for slab, stones and asphalt 163, MTM/HP-225 Shredder for slab, stones and asphalt 166, Rotor equipped O With tooth type R/HD 65 to be multiplied for rotor teeth quantity O With tooth type R adaptor R to be multiplied for rotor teeth quantity Machine equipped D O With rotor RSM-200 type G/3 for stones, stumps, roots, stabilizing - D O With rotor RSM-200 type G/3/R 44 for stabilizing and asphalt - D O With rotor RSM-225 type G/3 for stones, stumps, roots, stabilizing - D O With rotor RSM-225 type G/3/R 44 for stabilizing and asphalt - Options O Hydraulic top link 100 x 60 x 280 cat. 3-4 q.a. ORFS length 280 mm - 3rd + 4th category 1, O Hydraulic top link 120 x 60 x 250 cat. 3-4 q.a. ORFS length 250 mm - 3rd + 4th category 3, D O Water spray system for MTM Flow control 16, D O Water spray system FCS for MTM Automatic control of flow-speed-depth 24, Spare Parts K Tooth type R K Tooth type R/HD D Bushing type R Ø external conical 50 - Ø internal Snap ring DIN 471 Ø050 x 3 Bushing fixing ring 2.68 D Spring ring Ø30 Ring fixing tooth type R Tooth adaptor type R Adapter for tooth R K Tooth type R Tooth R44 suitable for asphalt K Tooth type G/ K Tooth adaptor type G/3-22 Adapter type G/ K Tooth type R Tooth R44 suitable for asphalt Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth STC/3/FP Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth STC/FP 1 screw Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø D Protection for rotor flange RSM-MTM Spring washer UNI 9195 Ø16 zn Hex head set screw UNI 5739 M16 x zn 1.67 D Protection steel side plate M16 x 50 for MTH pieces for MTM each item D Protection steel side plate M16 x 50 for MTH pieces for MTM each item D Protection steel side plate MTH-200 left - holed 1 piece for MTM each item D Protection steel side plate MTH-225 left - holed 1 piece for MTM each item D Protection steel side plate MTH-200 right - holed 1 piece for MTM each item D Protection steel side plate MTH-225 right - holed 1 piece for MTM each item D Protection steel side plate MTH tightened 2 pieces for MTM 200- each item D Protection steel side plate MTH tightened 2 pieces for MTM each item D Protection steel central plate MTM - holed 3 piece for MTM 200 and each item D Protection steel central plate M16 x 50 6 pieces for MTM 200 and each item D Protection steel central plate MTM - tightened 3 pieces for MTM 200 and each item Brass nozzle Veejet GAS 1/2" 100 l/min Brass nozzle Veejet GAS 1/2" 20 l/min Brass nozzle Veejet GAS 1/2" 40 l/min Brass nozzle Veejet GAS 1/2" 60 l/min Brass nozzle Veejet GAS 1/2" 150 l/min Yokes PTO drive shaft W2600 K64 rif (without yoke) standard PTO - W O Yoke for W2600 1"3/4 Z6 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z21 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z6 AGCC with clamping cone - 1" 3/4 Z20 standard yoke 10 11

70 MULTITASK MTH from 300 to 400 HP D 20 in ROCK GRINDER, STABILIZER, STONE CRUSHER AND ASPHALT SHREDDER FOR PTO TRACTORS. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft Friction clutch on side PTO Gearbox with freewheel Hydraulic front hood Hydraulic rear hood Adjustable Hardox counter-blade Interchangeable inner antiwear plates in Hardox Adjustable skids Anti dust machine body Variable crushing chamber Bolted grid on rear hood Hydraulic top link Inside lateral protection OPTIONS Extended 3 point linkage Water spray system FCS full control system Multiple tooth options ROTOR G/3 ROTOR R MODEL Tractor (min/max) PTO (rpm) Working width Total width Weight (Ibs) Working depth No. teeth/type G/3 + STC/3/FP + STC/FP Working depth Max. 1 Max. 2 Max. 1 Max. 2 No. teeth /type R + R/HD + STC/3/FP + STC/FP MTH MTH Max.1: with rotor only Max.2: maximum depth (maximum working depth depending on ground conditions) This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice. R 65 (standard) R/HD 65 (option) R 44 (option) G/3 (option) G/3/R 44 (option) STC/3/FP (side scraper) STC/FP (side scraper)

71 PRICE LIST Part number Part description Notes Price $ MTH MTH-200 Shredder for slab, stones and asphalt 168, MTH-225 Shredder for slab, stones and asphalt 172, Rotor equipped O With tooth type R/HD 65 to be multiplied for rotor teeth quantity O With tooth type R adaptor R to be multiplied for rotor teeth quantity Machine equipped D O With rotor MTH-200 type G/3 for stones, stumps, roots, stabilizing - D O With rotor MTH-200 type G/3/R 44 for stabilizing and asphalt - D O With rotor MTH-225 type G/3 for stones, stumps, roots, stabilizing - D O With rotor MTH-225 type G/3/R 44 for stabilizing and asphalt - Options D O Water spray system for MTH Flow control 16, D O Water spray system FCS for MTH Automatic control of flow-speed-depth 24, D O Extended three point linkage kit for MTH 2, Spare Parts K Tooth type R K Tooth type R/HD D Bushing type R Ø external conical 50 - Ø internal Snap ring DIN 471 Ø050 x 3 Bushing fixing ring 2.68 D Spring ring Ø30 Ring fixing tooth type R Tooth adaptor type R Adapter for tooth R K Tooth type R Tooth R44 suitable for asphalt K Tooth type G/ K Tooth adaptor type G/3-22 Adapter type G/ K Tooth type R Tooth R44 suitable for asphalt Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth STC/3/FP Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth STC/FP 1 screw Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø D Protection for rotor flange MTH Ø Spring washer UNI 9195 Ø16 zn Hex head set screw UNI 5739 M16 x zn 1.67 D Protection steel plate MTH right - holed 1 piece for MTH each item D Protection steel plate MTH left - holed 1 piece for MTH each item D Protection steel side plate MTH holed 2 pieces for MTH each item D Protection steel side plate MTH holed 2 pieces for MTH each item D Protection steel side plate M16 x 50 for MTH pieces for MTH each item D Protection steel side plate M16 x 50 for MTH pieces for MTH each item D Protection steel side plate M16 x 80 for MTH pieces for MTH each item D Protection steel side plate M16 x 80 for MTH pieces for MTH each item D Protection steel central plate MTH - holed 3 piece for MTH 200 and each item D Protection steel central plate M16 x 50 3 pieces for MTH 200 and each item D Protection steel central plate M16 x 80 6 pieces for MTH 200 and each item Brass nozzle Veejet GAS 1/2" 100 l/min 4 pieces for MTH Brass nozzle Veejet GAS 1/2" 20 l/min 4 pieces for MTH Brass nozzle Veejet GAS 1/2" 40 l/min 4 pieces for MTH Brass nozzle Veejet GAS 1/2" 60 l/min 4 pieces for MTH Brass nozzle Veejet GAS 1/2" 150 l/min 4 pieces for MTH PTO Shaft for MTH O PTO drive shaft Walterscheid P700 1"3/4 Z PTO drive shaft Walterscheid P700 1"3/4 Z standard PTO

72 STABILIZATION SSH STABILIZER FOR PTO TRACTORS. from 160 to 400 HP D 20 in All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Shaft with torque limiter Larger bearings Front access panel with hydraulic adjustment Forged steel rotor hubs Tooth holder in heat-treated forged steel Side guards for inner sides of the frame, built in Hardox steel Front inbound guards in Hardox steel Completely enclosed, dustproof WELDOX frame Hydraulic top link Front opening via chains OPTIONS Metering strips Bolted grid on rear hood Dampened metering strips Support skids (to prevent sinking) MODEL mín Tractor máx PTO (rpm) Working width Total width Weight (Ibs) Working depth No. teeth /type A/3 + MH SSH SSH SSH SSH SSH This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice. A/3 (standard) A/3/HD (option) F/3 (option) F/3/R (option) MH (side scraper)

73 PRICE LIST Part number Part description Notes Price $ SSH SSH-150 Forestry tiller/soil stabilizer 97, SSH-175 Forestry tiller/soil stabilizer 104, SSH-200 Forestry tiller/soil stabilizer 106, SSH-225 Forestry tiller/soil stabilizer 108, SSH-250 Forestry tiller/soil stabilizer 115, Rotor equipped O With tooth type A/3/HD to be multiplied for rotor teeth quantity O With tooth type F/3 to be multiplied for rotor teeth quantity O With tooth type F/3/R to be multiplied for rotor teeth quantity Options O Hydraulic top link 100 x 60 x 280 cat. 3-4 q.a. Only for SSH 150 and 175 1, O Hydraulic top link 120 x 60 x 250 cat. 3-4 q.a. (surcharge) Only for SSH , O Roller SSH-150 cpl in alternative to the dozing blade # 9, O Roller SSH-175 cpl in alternative to the dozing blade # 9, O Roller SSH-200 cpl in alternative to the dozing blade # 9, O Roller SSH-225 cpl in alternative to the dozing blade # 10, O Roller SSH-250 cpl in alternative to the dozing blade # 10, O Dozing blade SSH-150 cpl in alternative to the roller # 1, O Dozing blade SSH-175 cpl in alternative to the roller # 2, O Dozing blade SSH-200 cpl in alternative to the roller # 2, O Dozing blade SSH-225 cpl in alternative to the roller # 2, O Dozing blade SSH-250 cpl in alternative to the roller # 2, O Ploughshare kit for better soil penetration SSH 2, O Road skids SSH 4, D O Rear dozing flap for SSH-200 4, D O Rear dozing flap for SSH-225 4, D O Rear dozing flap for SSH-250 5, D O Stronger transmission CV (with P700 1"3/4 Z20) * P700 and two W2600 on the sides 3, D O Stronger transmission CV (with P700 1"3/4 Z6) * P700 and two W2600 on the sides 3, O "W" alignment kit for SSH 1, Spare Parts K Tooth type A/ K Tooth type A/3/HD K Tooth type F/ Tooth adaptor type F/ K Tooth type R Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Side scraper tooth type M-H left K Side scraper tooth type M-H right Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø Yokes for SSH models PTO drive shaft W2600 K64 rif (without yoke) standard PTO - W O Yoke for W2600 1"3/4 Z6 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z21 AGCC with clamping cone - W O Yoke for W2600 1"3/8 Z6 AGCC with clamping cone - 1" 3/4 Z20 standard yoke * Only for SSH 200, 225 and 250 NOTE: if tractor does NOT have adjustable hitch option the W alignment option is NOT compatible. # EITHER DOZING BLADE OR ROLLER (NOT BOTH) 14 15

74 STABILIZATION STABI/H - STABI/H/HP SOIL STABILIZER FOR PTO TRACTORS. from 300 to 500 HP D 20 in All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT PTO shaft Friction clutch on side PTO Gearbox with freewheel Gearbox with oil cooling system (STABI/H/HP) Side gearbox with oil cooling system Hydraulic rear hood Flat pressed welded steel counter-blades Interchangeable inner antiwear plates in Hardox Adjustable skids Anti dust machine body Inside lateral protection OPTIONAL Hydraulic top link Water spray system FCS full control system Multiple tooth options MODEL Tractor Working Working PTO Total width Weight width depth (rpm) (Ibs) mín máx Max.1 Max.2 No. teeth /type A/3 + STC/FP STABI/H STABI/H STABI/H/HP STABI/H/HP This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice. A/3 (standard) A/3/HD (option) F/3 (option) F/3/R (option) STC/FP (side scraper)

75 PRICE LIST Part number Part description Notes Price $ STABI/H STABI/H-225 Soil stabilizer 157, STABI/H-250 Soil stabilizer 161, STABI/H/HP STABI/H/HP-225 Soil stabilizer 170, STABI/H/HP-250 Soil stabilizer 174, Rotor equipped O With tooth type A/3/HD to be multiplied for rotor teeth quantity O With tooth type F/3 to be multiplied for rotor teeth quantity O With tooth type F/3/R to be multiplied for rotor teeth quantity Options O Hydraulic top link 120 x 60 x 250 cat. 3-4 q.a. ORFS length 250 mm - 3rd + 4th category 3, D O Grid cpl for STABI/H-225 3, D O Grid cpl for STABI/H-250 3, D O Water spray system for STABI/H Flow control 15, D O Water spray system FCS for STABI/H Automatic control of flow-speed-depth 24, Spare Parts K Tooth type A/ K Tooth type A/3/HD K Tooth type F/ Tooth adaptor type F/ K Tooth type R Hex socket head cap screw UNI 5932 M16 x 1,5 x black Hex socket head cap screw UNI 5932 M16 x 1,5 x black Schnorr anti vibration washer Ø K Tooth STC/3/FP Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø K Tooth STC/FP 1 screw Hex socket head cap screw UNI 5932 M24 x 2 x black Schnorr anti vibration washer Ø D Chain flap section 32-9 links l= Hex head set screw UNI 5739 M16 x zn Flat washer UNI 6592 Ø16 zn Spring washer UNI 9195 Ø16 zn Nylock lock nut UNI 7473 M16 10 zn 1.21 PTO shafts PTO drive shaft Walterscheid P700 1"3/4 Z standard PTO O PTO drive shaft Walterscheid P700 1"3/4 Z O PTO drive shaft Walterscheid P700 2"1/4 Z22 (gearbox 2"1/4 Z22)

76 CONSTRUCTION HYDRAULIC DRIVEN HEADS

77 STONE CRUSHERS FOR SKID STEER LOADERS STC/SSL from 80 to 120 HP D 6 in STONE CRUSHERS FOR SKID STEER LOADERS. All pictures shown are for illustration purpose only. Actual product may vary due to product enhancement. STANDARD EQUIPMENT Hydraulic piston motor 125cc with relief and anticavitation valve Adjustable hardox counter-blade Inner hydraulic dozing hood with adjustable cylinder for better output material regulation Penetration skids Working pressure control gauge Hydraulic hoses Hydraulic top link OPTIONAL Diverter valve (plug in and play) MODEL Power HP (CV) Requirements Flow gal/min Pressure PSI min max min max min max Working width Total width Weight (Ibs) Working depth Teeth q.ty type STCL/3 + C/3/SS STC/SSL STC/SSL This information refers to the machine equipped as standard. The technical data in this catalogue may be altered without prior notice. STCL/3 (standard) C/3/SS (side scraper)