STATE OF MINNESOTA Pricing Page (Typed Responses Preferred)

Transcription

1 SEQ. # (Turf Maintenance Equipment) STATE OF MINNESOTA Pricing Page (Typed Responses Preferred) Page 1 of 9 Vendor Name: Turfwerks Contact Person: Rob Sirfus Street Address: 1710 Alexander Rd P.O. Box: City, State, Zip Eagan, MN Phone #: Toll Free #: Fax #: Address: rsirfus@turfwerks.com Website: PERCENTAGE DISCOUNT OFF LIST PRICING 1.0 Catalog Section / Price List Title and Date Warranty 2yr or 2000hrs Percentage Discount to be applied to Price List Date & Price List I.D. Number Price for Set of Fluid and Air Filters Price for Set of Repair, Parts and Operating Manuals Discount off List Price for related parts and accessories See Special Terms and Conditions Vendor Owned Rental Return Or Demo Equipment Program See Solicitation Special Terms and Conditions. DEDUCT cost per Used Hour from the original Contract Price 2.0 DELIVERY STARTING POINT - CITY, STATE, ZIP CODE Price per loaded mile (See Special Terms and Conditions - No Flat Rate Allowed) 25% Discount Jacobsen Fairway Mowers Varies Supplied with Machines 25% Discount % Discount Included 3.0 INSTALLATION - PER HOUR (Hourly Shop Rate): Installation services may be requested on an "as needed" basis - see special terms and conditions.) Included with sale / $95.00hr

2 LF510 LF510 Lightweight Fairway Mowers models feature standard headlights, suspension seat with armrest, onboard control module, and backlapping; less cutting units and grass catchers. Factory filled with standard 10W-30 (red) hydraulic fluid. 2WD model standard less ROPS and seatbelt; 4WD model equipped standard with foldable ROPS and seat belt. List LF510 2WD $44, (Equipped standard WITHOUT ROPS & seatbelt. Note the LF510 2WD without ROPS is for use in specific applications on level ground with no potential of roll over. This unit is NOT for use on hills or slopes. ROPS and seat belt accessory kit required before using on hills or slopes.) LF510 4WD $49, " Diameter Cutting Units; less front roller (3 LH and 2 RH required for LF550, LF510) TrueSet Cutting Unit LF510, LF550, 7 blade reel LH (3 required) (replaces ) $2, TrueSet Cutting Unit LF510, LF550, 7 blade reel RH (2 required) (replaces ) $2, TrueSet Cutting Unit LF510, LF550, 9 blade reel LH (3 required) $2, TrueSet Cutting Unit LF510, LF550, 9 blade reel RH (2 required) $2, Verticut reel,.75 spacing (includes front and rear rollers, and lift yoke; LH-3 required) $2, Verticut reel,.75 spacing (includes front and rear rollers, and lift yoke; RH-2 required) $2, Rollers (1 front roller per cutting unit required unless Turf Groomer is selected) " Grooved assembly steel disc roller (2" diameter) $ " Grooved segmented machined aluminum roller (2-1/4" diameter) $ " Solid tube steel roller with scraper - light (2" diameter) $ " Solid tube steel roller with scraper - heavy (2" diameter) $ " Grooved machined steel roller (2-3/16" diameter) $ " Grooved machined aluminum roller (2-3/16" diameter) $ * Grooved steel front roller (3 diameter) $ * Front roller scraper for 3 grooved steel front roller (fits LF550, LF510) $46.35 * Solid tube steel rear roller (2 diameter) $ * Solid tube steel rear roller (2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ LF510 ROPS & Seatbelt Kit (Jacobsen recommends the use of a certified ROPS and $ LF510 Control Console Arm Swivel Kit (side-to-side movement like LF550/570) for $ LF510 Control Console Arm Swivel Kit (side-to-side movement like LF550/570) for $ LF510 Control Console Arm Swivel Kit (side-to-side movement like LF550/570) for $ Powered rear roller brush for 5"x22" cutting unit (replaces ) $ Grass Catcher (no mounting kit required for 5" $ reel) Canopy / Sunshade Kit - Adjustable $1, " Turf Groomer,.25" spacing for 5" x 22" $2, cutting unit (recommended for greens applications only); 2 required " Turf Groomer,.50" spacing for 5" x 22" cutting unit; 2 required $2, " Turf Groomer,.25" spacing for 5" x 22" $2, cutting unit (recommended for greens applications only); 3 required " Turf Groomer,.50" spacing for 5" x 22" cutting unit; 3 required $2, continued LF550/570, LF510 Jacobsen Ball Cage ACC for dealer installation $3, LF550/570, LF510 Jacobsen Ball Cage MOD, factory installed $4, * Hood Locking Latch (required for CE) $ High Height of Cut kit for 5" reel (5 required for $ LF550, LF510) - extends HOC to 1-3/16 * " TrueSet bedknife adjustment conversion kit (convert previous 4-point to new $329.60

3 SLF SLF-1880 Super Lightweight Fairway Mower models feature standard ROPS with seat belt, headlights, and suspension seat with armrest; less cutting units and grass catchers. Factory filled with GreensCare 68 Bio fluid. List SLF WD $40, SLF WD $44, Cutting Units; less front roller (5 required) TrueSet Cutting Unit SLF1880, 18" 8 blade (replaces ) $2, TrueSet Cutting Unit SLF1880, 18" 11 blade reel (replaces ) $2, Verticut reel,.75-inch spacing (includes $1, front and rear rollers; less lift yoke set ) Lift yoke set for Verticut reels (set of 5) $1, Rollers (1 front roller per cutting unit required unless Turf Groomer is selected) Solid tube front roller w/ scraper (2-3/16 diameter) $ Grooved steel front roller w/ scraper (3 diameter) $ Grooved machined steel roller (2-3/16 diameter) $ " Solid tube rear roller w/ scraper (2-3/16 diameter) $ * Hollow smooth tube steel roller (2 diameter) $ * Narrow width solid tube steel rear roller (2-3/16 diameter) (5 per machine) $ " Turf Groomer.5 spacing for 5" x 18" cutting unit $2, Grass Catcher $ Powered rear roller brush for 5"x18" cutting unit (requires counterweight ) $ * Counterweight kit (for use with powered rear roller brush) $ High cut kit (extends HOC to 15/16 when used with 2-3/16" roller) $ Canopy / Sunshade Kit - Adjustable $1, * " TrueSet bedknife adjustment conversion kit (convert previous 4-point $321.00

4 SLF530 SLF530 Super Lightweight Fairway Mower models feature standard rops with seat belt, led lights, and susp seat with armrest; less cutting units and grass catchers, Factory filled with greenscare 68 bio fluid SLF530 List F513 LF550 2WD -T4F (37.5 HP - Sold In ULSD countries only) $41, G513 LF550 4WD -T4F (37.5 HP - Sold In ULSD countries only) $46, " Diameter Cutting Units; less front roller (3 LH and 2 RH required for LF550, LF510, 4 LH and 3 RH required for LF557) Bld Reels (2 per SLF530) $1, Bld Reels (3 per SLF530) $1, Bld Reels (2 per SLF530) $1, Bld Reels (3 per SLF530) $1, Verticut - 2 per SLF530 $1, Verticuts - 3 Per SLF530 $1, Front Rollers (1 front roller per cutting unit required unless Turf Groomer is selected) " Solid Tube Front Rollers w/scraper (2-3/16") $ " Grooved Steel Front roller w/scraper ( 3" ) $ " Grooved machined steel roller (2-3/16) $ " Hollow smooth tube steel roller (2") $ Rear Rollers (1 rear rollers per cutting unit) " Solid tube rear rollers w/scraper ( 2-3/16 ) $ " Hollow smooth tube steel rollers w/scraper (2") $ " narrow width soldi tube steel rear rollers w/scraper (2-3/16") $ " Scraper, Floating Kit $ " narrow width solid tube steel rear roller (2-3/16") $ " hollow smooth tube steel roller (2") $ Groomer 18" spacing 1/2" spacing for 5" x 18" cutting unit, LH (2 per machine) $2, Groomer 18" spacing 1/2" spacing for 5" x 18" cutting (3 per machine) $2, Grass Cather only $ Catcher Kit $ Power Brushes (requires ) $ Counterweight Kit $ Hight Cut Kit $ Canopy / Sunshade kit $1, Grass Dispersal Fins kit (1 per reel) $41.00

5 HR600 ability to mow with 3,4 or 5 reels, widest cut is 138 inches HF600 JMP655 HF600 TRACTION UNIT - 8 bladed cutting units with high height of cut kit (5 required, 1 each of L,R,LW,RW,MPC) LMAC695-R 8 Blade right front LMAC695-L 8 Blade left front LMAC695-RW 8 Blade right wing LMAC695-LW 8 Blade left wing LMAC695-MPC 8 Blade Center 11 bladed cutting units with high height of cut kit (5 required, 1 each of L,R,LW,RW,MPC) LMAC696-R 11 Blade right front LMAC696-L 11 Blade left front LMAC696-RW 11 Blade right wing LMAC696-LW 11 Blade left wing LMAC696-MPC 11 Blade Center

6 List $69,450.00

7 LF550/557 LF550 & LF557 Lightweight Fairway Mowers model feature standard foldable ROPS with seat belt, headlights, suspension seat with armrest, onboard control module, and backlapping; less cutting units and grass catchers. Factory filled with GreensCare 68 Bio hydraulic fluid. Tier 4 Final (Stage IIIB) Engine (common rail and DPF) model requires use of Ultra-low sulfur diesel (ULSD). LF550 - (5 reel Lightweight Fairway Mower with Premium Seat) LF550 2WD PS-T4F (37.5 HP - Sold In ULSD countries only) $57, LF550 4WD PS-T4F (37.5 HP - Sold In ULSD countries only) $61, LF557 - (7 reel Lightweight Fairway Mower with Premium Seat) LF557 4WD H-PS-T4F (50 HP - Sold In ULSD countries only) $75, " Diameter Cutting Units; less front roller (3 LH and 2 RH required for LF550, LF510, 4 LH and 3 RH required for LF557) TrueSet Cutting Unit LF510, LF550, 7 blade reel LH (LF550/LF510-3 required. LF557-4 required) (replaces $2, TrueSet Cutting Unit LF510, LF550, 7 blade reel RH (LF550/LF510-2 required. LF557-3 required) (replaces $2, TrueSet Cutting Unit LF510, LF550, 9 blade reel LH (LF550/LF510-3 required. LF557-4 required) $2, TrueSet Cutting Unit LF510, LF550, 9 blade reel RH (LF550/LF510-2 required. LF557-3 required ) $2, Verticut reel,.75 spacing (includes front and rear rollers, and lift yoke; LF550/LF510-3 re $2, Verticut reel,.75 spacing (includes front and rear rollers, and lift yoke; LF550/LF510-2 re $2, Rollers (1 front roller per cutting unit required unless Turf Groomer is selected) " Grooved assembly steel disc roller (2" diameter) $ " Grooved segmented machined aluminum roller (2-1/4" diameter) $ " Solid tube steel roller with scraper - light (2" diameter) $ " Solid tube steel roller with scraper - heavy (2" diameter) $ " Grooved machined steel roller (2-3/16" diameter) $ " Grooved machined aluminum roller (2-3/16" diameter) $ * Grooved steel front roller (3 diameter) $ * Front roller scraper for 3 grooved steel front roller (fits LF550, LF510) $46.35 * Solid tube steel rear roller (2 diameter) $ * Solid tube steel rear roller (2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ Powered rear roller brush for 5"x22" cutting unit (replaces ) $ Grass Catcher (no mounting kit required for $ " reel) Canopy / Sunshade Kit - Adjustable $1, " Turf Groomer,.25" spacing for 5" x 22" $2, cutting unit (recommended for greens applications only); 2 required " Turf Groomer,.50" spacing for 5" x 22" cutting unit; 2 required $2, " Turf Groomer,.25" spacing for 5" x 22" $2, cutting unit (recommended for greens applications only); 3 required " Turf Groomer,.50" spacing for 5" x 22" cutting unit; 3 required $2, LF550/570, LF510 Jacobsen Ball Cage ACC for dealer installation $3, LF550/570, LF510 Jacobsen Ball Cage MOD, factory installed $4, * Hood Locking Latch (required for CE) $ High Height of Cut kit for 5" reel (5 required for LF550, LF510, 7 required for $ * LED Light Kit - Operator platform mounted, includes one LED Light (for LF550, LF570) $ * " TrueSet bedknife adjustment conversion kit (convert previous 4-point to $329.60

8 LF570/577 LF570 & LF577 Lightweight Fairway Mowers models feature standard foldable ROPS with seat belt, headlights, suspension seat with armrest, onboard control module, and backlapping; less cutting units and grass catchers. Factory filled with GreensCare 68 Bio hydraulic fluid. Tier 4 Final (Stage IIIB) Engine (common rail and DPF) model requires use of Ultra-low sulfur diesel (ULSD). LF570 - (5 reel Lightweight Fairway Mower with Premium Seat) LF570 2WD PS-T4F (37.5 HP - Sold In ULSD countries only) $60, LF570 4WD PS-T4F (37.5 HP - Sold In ULSD countries only) $64, LF577 - (7 reel Lightweight Fairway Mower with Premium Seat) LF577 4WD H-PS-T4F (50 HP - Sold In ULSD countries only) $79, " Diameter Cutting Units; less front roller (5 required for LF570; 7 required for LF577) blade reel $2, blade reel $2, Verticut reel, 1 spacing (includes front and rear rollers; less lift yoke # ) $2, Rollers (1 front roller per cutting unit required unless Turf Groomer is selected) " Grooved assembly steel disc roller (2" diameter) $ " Grooved segmented machined aluminum roller (2-1/4" diameter) $ " Solid tube steel roller with scraper - light (2" diameter) $ " Solid tube steel roller with scraper - heavy (2" diameter) $ " Grooved machined steel roller (2-3/16" diameter) $ " Grooved machined aluminum roller (2-3/16" diameter) $ * Grooved steel front roller (3 diameter) $ * Front roller scraper for 3 grooved steel front roller (fits LF570, LF577) $30.90 * Solid tube steel rear roller (2 diameter) $ * Solid tube steel rear roller (2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ * Solid tube steel rear roller (2-1/2 diameter) $ Powered rear roller brush for 7"x22" cutting unit (replaces ) $ Heavy-duty rear roller scraper bar kit for 7" reel with rear roller brush (set of 5) $ Grass Catcher (catcher mounting hardware kit $ required for 7" reel) RH Catcher Mounting Hardware Kit, 7" reel (3 for LF570, 4 for LF577) $ LH Catcher Mounting Hardware Kit, 7" reel (2 for LF570, 3 for LF577) $ Canopy / Sunshade Kit - Adjustable $1, " Turf Groomer,.50" spacing for 7" x 22" cutting unit; 2 required for LF570, 3 for LF577 $2, " Turf Groomer,.50" spacing for 7" x 22" cutting unit; 3 required for LF570, 4 for LF577 $2, continued LF550/570, LF510 Jacobsen Ball Cage ACC for dealer installation $3, LF550/570, LF510 Jacobsen Ball Cage MOD, factory installed $4, * Hood Locking Latch (required for CE) $36.07 * Lift Yoke for 7 Cutting unit or Verticut reel (5 required for LF570,7 for LF577) $ * High Height of Cut Kit for 7" reel (5 for LF570, 7 for LF577) - extends HOC to 1-9/16 $ * LED Light Kit - Operator platform mounted, includes one LED Light (for LF550, LF570) $448.05

9 TURF Management T-775(5) RESPONDER'S NAME: Davis Equipment Corp / DBA Turfwerks SWIFT EVENT NUMBER: SWIFT Event Number #7883 Following is a list of all distributors that are authorized to sell the equipment listed above. All distributors will provide the required insurance certificates to the State as outlined in the Swift Event Special Terms and Conditions before any State Contract may be executed. The SWIFT Vendor number must be complete and include the vendor location number and the vendor location number, i.e., COMPANY SWIFT VENDOR COMPANY PHONE CONTACT NAME & LOCATION NO. STREET ADDRESS STATE NUMBER NAME Davis Equipment Corp Davis Equipm5225 NW Beaver Drive IA / Rob Sirfus Turfwerks Turfwerks 5225 NW Beaver Drive IA / Rob Sirfus Turwerks Turfwerks 1710 Alexander Rd MN / Rob Sirfus