D. S. HULL COMPANY, INC

Transcription

1 Smooth Center Diamond Pattern Center DP40-B DP40-W Deck Plates Beckson Pry-Out Deck Plates Extra heavy-duty O-ring to assure a watertight fit. Nonskid surfaces on lid. Pry-out plates are to be installed in areas where internal pressure (oil-canning) is not present. For inspection of compartments, clean out or access. Also great for access to the backs of accessories. 6 Diameter Order No Mfg No Color Type List DP61-W White Smooth Center $ DP65-W White Diamond Pattern Center $ DP63-W White Nonskid Center $ Diameter Order No Mfg No Color Type List DP83-W White Nonskid Center $34.05 O-Ring Gaskets for Beckson Deck Plates Nonskid Center Order No Mfg No Diameter List D6P-G 6 $ D8P-G 8 $4.55 Beckson Twist-Out Deck Plate with Overlapping Cover Conceals fasteners for a clean modern look on any bulkhead. Self-centering, and quickly locks in place with a 1/8 twist. Separate sealing areas designed to chase water away from plate opening. Assures a watertight closure. Bayonet threads are non-jamming, self-cleaning. Beckson Screw-Out Deck Plates Designed to provide access without the use of tools. Features single start, nonjamming (no cross-thread), extra strong, self-cleaning buttress thread. Self-aligning center and gasket to assure a watertight seal. Backup sealing wall leaves the plate waterproof even if the gasket is removed. The clear center plate permits observation of controls or gauges and visual inspection without removing the plate. 4 Diameter Order No Mfg No Color Type List DP40-B Black Smooth Center $ DP40-W White Smooth Center $ DP40-W-C White Clear Center $ Diameter Order No Mfg No Color Type List DP60-B Black Smooth Center $ DP60-W White Smooth Center $ DP62-W White Nonskid Center $ DP60-W-C White Clear Center $ Diameter Order No Mfg No Color Type List DP80-W White Smooth Center $ DP80-B Black Smooth Center $ DP80-W-C White Clear Center $35.90 Deck Plate Gaskets DP40-W-C Order No Mfg No Diameter List D4S-G 4 $ D6S-G 6 $3.00 Order No Mfg No Diameter Color List DP50-W 5 White $ Prices and specifications subject to change without notice.

2 TH Marine Sure-Seal Oval Deck Plates Watertight - lid overlaps frame. Total UV and chemical stability. Positive O ring seal. No visible mounting fasteners. Order No Mfg No Type Size Lid List DPOVAL-6D-2-DP Pry- Out 13-1/8 x 6-4/8 White Texture $62.25 TH Marine Screw Down Deck Plates These screw down deck plates are an inexpensive alternative to screw out or pop out plates where quick access is not necessary. These plates are molded of super tough poly to be extra strong. They have an attractive matte finish and mount easily with countersunk screws. Order No Mfg No Color Outside Diameter SDP-1FW-DP White 5-5/8 $ SDP-1-DP Black 5-5/8 $ SDP-2FW-DP White 8 $ SDP-3WF-DP White 10 $17.82 List TH Marine Sure-Seal Deck Plates Watertight - lid overlaps frame Total UV and chemical stability Positive O Ring seal. No visible mounting fasteners. Lids available with textured finish. Order No Mfg No Type Size Lid List DPS-4-1-DP Screw Out 4 Black Textured $ DPS-4-2-DP Screw Out 4 White Textured $ DPS-6-1-DP Screw Out 6 Black Textured $ DPS-6-2-DP Screw Out 6 White Textured $ DPP-8-1-DP Pry-Out Style 8 Black Textured $ DPP-8-2-DP Pry-Out Style 8 White Textured $35.83 TH Marine Low Profile Twist-Out Deck Plates Quick twist out lid allows fast access. Smooth low-profile lid overlaps frame. Hidden fasteners provide smooth look. O-ring for watertightness. Order No Mfg No Size Color List DPSLP--4S-2 4 White $ DPSLP-5S-2 5 White $19.11 TH Marine Designer Series Access Hatches Cam style locks hold lid securely. Positive lid seal for watertight fit. Hidden fasteners in frame Stainless steel hinges allow full 180 opening. Structurally engineered Walk On lids. Six sizes for all uses - vertical or horizontal Order No Mfg No Color Size List HDS DP White 7 x 14 $ HDS DP White 11 x 15 $ HDS DP White 11 x 19 $ HDS DP White 13 x 17 $ HDS DP White 13 x 24 $ HDS DP White 13 x 30 $ Removable Hatch Lid Type Hatches Standard Hatch Removable Lid Order No Mfg No Color Size List HDSS REM White 13 X 17 $ HDSS REM White 13 X 24 $ Deck Plates & Hatches Prices and specifications subject to change without notice. 163

3 Gas Charged Hatch Support Mounting Brackets Hatches Deck Plates TH Marine Cam Lock Deck Plate Cam hatch holds secure. Hidden fasteners in ring. Gripper in lid prevents rotation. Easy to open and close. Textured finish. Order No Mfg No Color Size List DPCAM-6-2-DP White 6 $ DPCAM-8-2-DP White 8 $47.10 TH Marine Sure-Seal Access Hatches Easy access to horizontal or vertical storage. Watertight - lid overlaps frame. Dual seals - lid and frame. No visible fasteners. Corrosion free integrated hinge. 180 door opening. Order No Mfg No Color Dimensions List HAT DP Black 11 x 15 $ HAT DP White 11 x 15 $ HAT DP White 13 x 17 $ HAT DP White 13 x 24 $ HAT DP White 13 x 30 $ Screw-In Center Press-In Center Locking Bomar Deck Plates High impact polycarbonate UV stabilized deck plates. Acetone proof. Non-skid locking center. O ring seal. Order No Mfg No Features Dimensions Color List Screw-In Center Screw-In Center Press-In Center Locking 3-7/8 I.D., 5-1/2 O.D., Cut out 4-1/4 5-3/4 I.D., 8-1/16 O.D., Cut out 6-3/8 7-5/8 I.D., 915/16 O.D., Cut out 8-3/8 10 I.D., 11-1/4 O.D., Cut out 10-3/8 Off White Off White Off White $17.00 $19.00 $22.00 White $ SS 1015SS 1060SS 1020SS 1085SS Mounting Brackets For Gas Charged Hatch Supports 304 Stainless steel. Ball size 10 mm. (3) #8 screws required for mounting. Order No Mfg No Length Width Height List SS 2 5/8 7/8 $ SS 2-1/2 3/4 1-7/16 $ SS 2-1/8 13/16 1-1/16 $ SS 2 1-1/4 1 $ SS 2 1-3/16 1-1/8 $6.13 Ball Studs For Gas Charged Hatch Supports Order No Mfg No Length Ball Size Thread List G-1005SSC 1 10mm 5/16-18 $ G /4 13mm W/Bracket $18.60 G-1030 G-1130 Miscellaneous Parts For Gas Charged Hatch Supports Order No Mfg No Item Material List G-1030C Spring Retainer Black Composite $ G-1130C Snap on Cap Black Composite $ Prices and specifications subject to change without notice.

4 Whitecap Gas Charged Hatch Supports Self-contained, nitrogen-driven. Patented, multilobe seal, which combined with corrosion resistant chromium shaft offers superior service life and performance. 2-year warranty. Heavy gauge steel body with heat-cured paint or 316 stainless steel. O-ring insures proper sealing to force oil towards the orifice piston. Hydraulic fluid specially formulated to provide end of travel damping. Piston assembly provides precise control during the extension stroke. Do-it-yourself replacement Installs in minutes No special tools needed. See previous page for mounting hardware. 316 Stainless Steel Order No Mfg No Extended Length Compressed Length Rod Diameter Tube Diameter Force List G-3120SS 7-1/2 5-1/2 6 mm 15 mm 20 $ G-3140SS 7-1/2 5-1/2 6 mm 15 mm 40 $ G-3020SS mm 15 mm 20 $ G-3040SS mm 15 mm 40 $ G-3320SS /2 6 mm 15 mm 20 $ G-3340SS /2 6 mm 15 mm 40 $ G-3360SS /2 6 mm 15 mm 60 $ G-3420SS mm 15 mm 20 $ G-3440SS mm 15 mm 40 $ G-3460SS mm 15 mm 60 $ G-3490SS mm 15 mm 90 $ G-34120SS mm 18 mm 120 $53.85 Black Nitrate Body Order No Mfg No Extended Length Compressed Length Rod Diameter Tube Diameter Force List G /2 6 mm 15 mm 20 $ G /2 6 mm 15 mm 40 $ G mm 15 mm 20 $ G mm 15 mm 40 $ G /2 6 mm 15 mm 20 $ G /2 6 mm 15 mm 30 $ G /2 6 mm 15 mm 90 $ G /2 6 mm 15 mm 20 $ G /2 6 mm 15 mm 30 $ G /2 6 mm 15 mm 40 $ G /2 6 mm 15 mm 60 $ G /4 6 mm 15 mm 20 $ G /4 6 mm 15 mm 30 $ G /4 6 mm 15 mm 40 $ G /4 6 mm 15 mm 60 $ G mm 15 mm 90 $ G mm 15 mm 40 $ G mm 15 mm 20 $ G mm 15 mm 30 $ G mm 15 mm 60 $ G mm 18 mm 90 $ G mm 18 mm 120 $ G /2 10 mm 22 mm 120 $22.90 Prices and specifications subject to change without notice. 165 Whitecap Gas Charged Hatch Supports

5 P P Beckson Twist Knobs Traditional style twist knobs. Stainless steel hexnut molded in place. Eliminates freespinning. Accepts bolts with 1/4-20 threads. 2 per pkg. Order No Mfg No Color List PRT-B Black $ PRT-W White $13.40 P /16 P P , 1729, Bomar Hatch Replacement Parts N.A. Taylor Hatch Replacement Parts Bomar Hatch Replacement Parts Order No Mfg No Item List P /16 Hatch Gasket (50 rolls; sold by the ft.) 1/2 Hatch Gasket (50 ft. rolls; sold by the ft.) $5.25 $ P Right Latch Dog Assembly $ P Left Latch Dog Assembly $ P P /16 Extruded Hatch Gasket (20 ft. rolls; sold by the ft.) $5.50 Female Knob for Dog $ P Latch Dog Assembly $ P Cast Riser Arm $ P Male Knob $ P & P P P /8 P P Female Knob for Dog $13.00 N.A. Taylor Hatch Replacement Parts Order No Mfg No Item List , Handle w/post, O rings, screw $ Hatch riser arm locking knob $ Hatch riser arm for 20 x 20 hatch $ Hatch riser arm for 12 x 12 hatch $ Hatch riser arm for 10 x 10 hatch $ Female Knob for Dog $ Installation foam 1/4 x 1/2 $ x 18 Hatch Riser Arm $ x 17 Hatch Riser Arm $ x 18 Hatch Riser Arm $ Present Handle w/posts $ x 10 Ultra III Hatch Arm $ x 12 or 13 x 18 Hatch Arm $ x 17 Ultra III Hatch Arm $ x 18 Ultra III Hatch Arm $ x 20 Ultra III Hatch Arm $ Ultra III Latching Handles $ Prices and specifications subject to change without notice.

6 StanPro Standard Double Lip Trim Flexible Quick and easy to install Aluminum core resists rust and corrosion Strong, resilient gripping power No fasteners or adhesives required Fits applications from 1/32 to 1/8 thick edges. Grips edges from.032 to ft. rolls, sold by the foot. Flexible Quick and easy to install. Aluminum core resists rust and corrosion. Strong, resilient gripping power. No fasteners or adhesives required. Fits applications from 1/32 to 1/8 thick edges. Grips edges from.032 to ft. rolls. Order No Mfg No Color List Black $ White $ StanPro Tape-On Seal D-Bulb Gasket Thermoplastic Elastomer with automotive grade tape for adhesion. Sponge rubber with automotive grade tape for adhesion. Easy to install. Excellent sealing properties. Ease of assembly allows for more efficient processes. Proven assembly process utilized in the high volume automotive applications. Consistent, high-quality materials. 200 ft. rolls. Order No Mfg No Type Size List Single 5/8 wide $ Double 1-1/2 wide $ Frost King EPDM Rubber Weatherseal Fills wide gaps. Premium rubber will not harden, crack or freeze. Retains shape in sub-zero temperatures. Self-stick tape. Dimensions 9/16 wide x 5/16 thick x 10 long. White V27WA $16.20 Prices and specifications subject to change without notice. MDR Weatherseal Tape Non-moisture absorbing PVC foam tape seals out moisture and weather. 1/8 thick tape is ideal for cushioning windows and doors. Absorbs shock and eliminates vibration. Prevents metal to metal contact. 3/8 x 10 roll MDR-370 $10.78 Frost King Vinyl Foam Weatherstrip A versatile self-stick tape with medium compression. Vinyl Foam Weather-seal is waterproof and weather resistant, suitable for indoor and outdoor use. Order No Mfg No Color Size List V442H Gray 1/4 W x 1/8 T x 17 $ V443 Gray 3/8 W x 3/16 T x 17 $ R538H Black 3/8 W x 5/16 T x 10 $ R538WH White 3/8 W x 5/16 T x 10 $ R738H Black 3/8 W x 7/16 T x 10 $ V445H Gray 1/2 W x 3/8 T x 10 $ V449H Gray 3/4 W x 3/16 T x 17 $ R534H Black 3/4 W x 5/16 T x 10 $ R534WH White 3/4 W x 5/16 T x 10 $ R734H Black 3/4 W x 7/16 T x 10 $ R734WH White 3/4 W x 7/16 T x 10 $6.60 3M Super Weatherstrip Adhesive For adhering all types of weatherstrip to doors. Fast drying, strong, flexible, rubbery adhesive. Withstands vibration & extreme temperature variation. Good oil and water resistance. 5 oz. tube. Order No Mfg No Color List Yellow $ Black $ Double Lip Trim Weatherseal Hatch Gasket Weatherstrip Adhesive

7 Perko Portlight Weatherstripping Open cell foam rubber supplied in 10 ft. lenths. Height: 3/8. Min. width inches: 1/4. Max. width inches: 7/ $22.50 Weather Seal Windshield Support Bar Hatch Holders Windshield Adjusters Taco Weather Seal & Hatch Tape Made of durable flexible sponge rubber with a heavy duty self-adhesive backing. Weather Seal prevents leaks and stops rattles. Replace old seals around hatch frames, door frames, and live wells. Use weather seal and hatch tape anywhere you need a weather tight compartment. Weather Seal Order No Mfg No Dimensions List V B10-1 3/8 x 1/4 x 10 $ V B10-1 5/8 x 3/8 x 10 $ V B10-1 3/8 x 1/8 x 10 $ V B10-1 1/2 x 1/2 10 $30.38 Hatch Tape Order No Mfg No Dimensions List V B8-2 1/8 x 3/4 8 $ V B8-2 1/4 x 3/4 8 $15.25 N.A. Taylor Windshield Support Bars Used as original equipment on many walk-thru windshields. Made from either anodized aluminum tubing with nylon fittings or powder coated aluminum tubing with chrome fittings. Fittings allow for pivot in almost every direction for easy installation. Order No Mfg No Length List $ $ $ $ Moonlight Marine Spring Type Hatch Holder 300 Series stainless steel and black anodized aluminum. Patented design. Prevents over-opening. Will not stretch or break. For use with hatches, as well as bait tanks, battery boxes, electric consoles, etc. Easy to install. Order No Mfg No Type Diameter Length Only Bracket W/Plate & Cable 7/8 11-3/4 $ W/Support 9/16 10 $ W/Support 7/16 8-1/2 $ L-Bracket 7/16 8-1/2 $ W/Support 7/16 6-1/2 $14.52 Perko Windshield Adjuster Chrome plated brass and zinc. Black plastic knob. Rod O.D. is 3/8. Order No Mfg No Length List DP1CHR 8 $ DP2CHR 10 $85.10 Perko Telescoping Windshield Adjuster Chrome plated brass and zinc. Black plastic knob. Rod O.D. is 1/2. Extends from 10 closed to 18 open. Requires four #6 screws DP1CHR $ Prices and specifications subject to change without notice.

8 Perko Side Mount Windshield Adjuster Chrome plated zinc. Black plastic knob. 12 long overall with 9-1/2 length adjustment. Sold in pairs DPOCHR $92.80 Perko Sliding Window Lock Chrome plated zinc. Black plastic knob and tip. Overall height: 1-5/8. Screw size: #6. Adjustment: 1-1/8. Mounting plate dimensions: 2 x 5/ DPOCHR $17.33 Perko Hatch Support Braces Chrome plated brass DP1CHR $ Perko Sliding Window Lock & Anti-Rattler Chrome plated zinc. Black plastic knob and tip. Overall height: 1. Mounting plate dimensions: 2 x 5/8. Adjustment: 1-1/8. Screw size: # DPOCHR $17.30 Perko Hatch Fastener or Windshield Keeper Chrome plated bronze. Bolt length: 1-1/2. Bracket dimensions: 1-9/16 x 1. Keeper dimensions: 1-7/8 x 7/8. Screw size: # DPOCHR $40.03 Prices and specifications subject to change without notice. Perko Sliding Window Stop Chrome plated zinc. Plastic cover on stopping plate. Mounting plate dimensions: 1-7/8 x 3/4. Stopping plate length: 1-1/2. Screw size: # DPOCHR $18.38 Perko Hatch Fastener or Windshield Keeper Chrome plated brass and zinc. Black plastic handle. Base dimensions: 1-1/2 x 5/8. Screw size: # DPOCHR $63.05 Perko Hatch Fastener Chrome plated bronze. Black plastic knob. Overall dimensions: 3-3/4 x 1-5/8. Adjustment thread: 2-1/4. Screw size: # DPOCHR $ Hatch Holders Windshield Keeper Window Stop Hatch Fastener

9 Whitecap Windshield Keeper & Plate Chrome plated brass construction. Locks windshield into position. Prevents rattles. Base size: 5/8 x 1-5/ S-013C $17.58 Perko Lockable Hold Down Clamp Chrome plated bronze. 2-3/4 x 1-3/4 base dimensions. Padlock clearance is 1/ DPOCHR $94.15 Perko Sliding Window Handle Stainless Steel Width overall: 3-7/16. Width inside: 2-15/16. Screw size: # DPOSTS $11.35 Beckson Stainless Steel Tie Down Twist Knob pivots to adjust and fold back 90 for flush fit. Length in closed position is 2 (5.1 cm) TDS-1 $23.95 Windshield Locks & supports Window Stops Whitecap Window Anti-Rattler Chrome-plated cast brass with rubber stop. Base is 1 W x 1-1/4 L. Screw take-up is 7/ S-550C $7.23 N. A. Taylor Adjustable Side Vent Handles Designed to replace most original handles on side vent windows. Easy installation. Designed to fit side windows having exactly 1/4 mounting hole. Sold in pairs; left and right $25.85 Sugatsune Stainless Steel Lid Support Material: 304 stainless steel. Finish: Satin. Screws not included. Order No Mfg No Length Type List F-100R 4 Right Hand $ F-100L 4 Left Hand $ F-150R 6 Right Hand $ F-150L 6 Left Hand $ F-200R 8 Right Hand $ F-200L 8 Left Hand $ F-250R 10 Right Hand $ F-250L 10 Left Hand $10.50 Sliding Door Stop White rubber. 7/8 diameter; 7/16 height $3.49 Sugatsune Lid Stay with Lock Mechanically locks lid when fully opened. Ideal for vibration or shock application. Pull the locking knob to release lock. Non-handed. Only one stay per lid required. Order No Mfg No Length List LSP-270B 10-5/8 $ Prices and specifications subject to change without notice.

10 Schmitt & Ongaro Standard Windshield Wiper Kit Black Powder Coated Aluminum Cover 304 SS Mtg. Plate, Shaft & Mounting 90 or 110 Adj. Sweep Will Power up to a 14 Arm & Blade Guaranteed 3 Years Includes: Arm & 11 Blade. Order No Mfg No Volts List VDC $ Replacement Wiper Arm Order No Mfg No Adjusts Color Only : - 14 Black $30.00 Schmitt & Ongaro Heavy Duty 2-Speed Wiper Motors Black Powder Coated Housing 304 SS Mtg., 316 SS Shaft, Chrome Plated Brass Shaft Housing Adj. Sweep 45, 60, 80 & 110 Degree Adj. Park Position Right or Left Will Power up to a 24 Arm & 22 Blade Guaranteed 3 Years VDC $ VDC $ Schmitt & Ongaro Deluxe Ultra HD Adjustable Arms Black; Powder Coated 304 Stainless Steel. HD Stainless Steel Spring. Will replace all Competitive Arms on HD motors. 5/8 Shaft. Order No Mfg No Adjusts Type List Deluxe Adjustable $ Deluxe Adjustable $ Deluxe Adj. w/adj. Tip $ Deluxe Adj. w/adj. Tip $ Deluxe Parallel $ Deluxe Parallel $98.55 Windshield Wiper Motors & Arms Heavy Duty Waterproof 2 Speed Wiper Motor 316 Stainless steel shaft. Solid brass nickel plated mounting hardware. Adjustable sweep Adjustable park position right or left. Will power up To 24 arm & 22 blade. Schmitt & Ongaro Parallel Wiper Arms Black powder coated stainless steel. HD stainless steel spring. Easy to install. Replaces most competitive arms. Order No Mfg No Length Type List Parallel Arm $ Parallel Arm $ Parallel Arm $ VDC $ VDC $ Prices and specifications subject to change without notice. 171

11 Windshield Wiper Blades Windshield Washer Kit Schmitt & Ongaro Deluxe Ultra Blades Powder coated Natural rubber blade. Replaceable blade inserts. Packed w/3 adapters to fit above arms and most competitive arms. Order No Mfg No Length List $ $ $ $ $ $ $ $23.10 AFI Deluxe Curved Windshield Wiper Blades Stainless steel. For standard or waterproof wiper motors as well as GM series. Curved blade ensures maximum clearance for unobstructed view. Order No Mfg No Length List $30.40 AFI Straight Wiper Blades Black Polymer: Glass impregnated construction. Marine grade rubber squeegee. Stainless steel: Long-lasting silicone squeegee. Order No Mfg No Type Length List B Black Polymer 18 $ B Black Polymer 20 $ B Black Polymer 22 $ B Black Polymer 24 $31.23 Schmitt & Ongaro Windshield Washer Kit Poly Proplene tank with motor, pump, tubing and fittings to attach to wiper arm (sold separately). Available in 12 or 24 Volt. Order No Mfg No Volts List $ $93.60 Windshield Washer Hose Fittings $16.45 Over 350 brand name manufacturers. Enormous, strategically located warehouse to support all of our customers. We can stock more inventory and buy in larger quantities which helps us keep our prices low. Selection second to none. 120 years combined marine experience within our sales team - we can find what you need! Exclusive Wesmar distributor. Hours: 8:00 a.m. - 4:30 p.m. - Monday - Friday. Knowledgeable & friendly staff ready to help you. Call Debbie Senti ext. 313 Call Jim Haun ext. 304 Call Lou Moran ext. 314 Call Bob Leatherman ext Prices and specifications subject to change without notice.

12 Positive Locking Type M One-hand release - just push the button, then pull. There s no faster operating locking pin or safe pin. The unique Ball-Lok action means it cannot dislodge accidentally even under severe tension Q4M1.00 1/4 X 1 $ Q4M1.50 1/4 X 1-1/2 $ Q4M2.00 1/4 X 2 $ Q5M1.00 5/16 X 1 $ Q5M1.50 5/16 X 1-1/2 $ Q5M2.00 5/16 X 2 $37.20 Standard Style Type R Q3R0.50 3/16 x 1/2 $ Q4R0.50 1/4 x 1/2 $ Q4R1.00 1/4 x 1 $ Q4R1.50 1/4 x 1-1/2 $ Q4R2.00 1/4 x 2 $ Q4R2.50 1/4 x 2-1/2 $ Q5R2.00 5/16 x 2 $ Q5R2.50 5/16 x 2-1/2 $ Q5R3.00 5/16 x 3 $33.75 Detent Type D Q3D0.50 3/16 X 1/2 $ Q3D1.00 3/16 X 1 $ Q3D1.50 3/16 X 1-1/2 $ Q3D2.00 3/16 X 2 $ Q4D0.50 1/4 X 1/2 $ Q4D1.00 1/4 X 1 $ Q4D1.50 1/4 X 1-1/2 $ Q4D2.00 1/4 X 2 $ Q4D2.50 1/4 X 2-1/2 $ Q4D3.00 1/4 X 3 $ Q5D1.00 5/16 X 1 $ Q5D1.50 5/16 X 1-1/2 $ Q5D2.00 5/16 X 2 $ Q6D1.00 3/8 X 1 $ Q6D1.50 3/8 X 1-1/2 $ Q6D2.00 3/8 X 2 $ Q6D2.50 3/8 X 2-1/2 $20.04 Ronstan Toggle Pins Grade 316 stainless steel. Order No Prices and specifications subject to change without notice. Mfg No A B C D E List RF115X1 1/4 13/16 1-1/8 1-25/32 5/16 $ RF115X1-1/4 1/4 3/ /4 5/16 $21.60 Ronstan Cam Cleats Designed for easy cleating and releasing of control lines in every application and load condition. Through the use of advanced composites, these cleats achieve superior performance while overcoming the limitations of metal alloys. Ronstan cam cleats are strong, lightweight and corrosion free. Small cam cleats hold rope up to 5/16. Medium cam cleats hold 1/8 to 1/2 diameter. T Cleats Lightweight hi-tech composite cams are corrosion free and long wearing RF5001 Small $ RF5011 Medium $28.95 Ronstan Swivel Base Deadeye and Cam Cleat Permits easy cleating and releasing from any angle. Deadeye has stainless steel liner. Cleat plate is thick gauge aluminum. Medium T Cleat and fairlead suitable for 1/8 to 1/2 line RF58 $77.95 Ronstan C Cleats Lightweight, ultra rigid carbon fiber composite cams are corrosion free, suffer virtually no tooth wear, and are non-rope abrasive. Order No Mfg No Size Color List RF5000 Small Gray $ RF5000BLU Small Blue $ RF5010 Medium Gray $ RF5010BLU Medium Blue $ Quick Release Pins Toggle Pins Cam Cleats

13 Ronstan Utility Blocks There are many uses for these simple, economical and reliable blocks. They are often used for light duty purchase systems such as dinghy boom vangs, cunninghams, leech line tackles, bunk adjusters, etc. Stainless steel cheeks and Acetal sheaves ensure a long service life with virtually no maintenance. Blocks with hollow rivets accept the RF 807 shackle becket. Loop top blocks are suitable for direct splicing to rope or use with shackles. Ronstan Fast Track Fairleads A separate, one-piece accessory that is easily fitted to the cam cleat. Offering fast, precise cleating and release from any lead angle and lower entry efforts for off-center cleating, Fast Track fairlead is made from tough, abrasion resistant composite material. The compact, low profile design will not catch lines or clothing. Gray color RF5005GRY Small $ RF5015GRY Medium $10.30 RF81 1-1/8 Sheave Diameter - 1/4 Line Order No Mfg No Type List RF81 Dbl. Block Loop top $ RF185 Sgl. Block Tube Rivet RF185 $18.50 RF661 RF666 3/4 Sheave Diameter - 3/16 Line Order No Mfg No Type List RF661 Sgl. Block $ RF666 Sgl. Block $12.40 Sailboat Rigging Ronstan Rope Guides A load side mounted fairlead that ensures correct alignment of control lines into the cleat. The stainless steel loop is held firmly between the cleat base and the gasket pad to protect the deck RF5004 Small $ RF5014 Medium $8.95 Ronstan Series 20 Ball Bearing Blocks Perfect choice for all types of dinghy control line applications. Excellent for use in powerful, efficient purchase systems for boom vangs, outhauls, cunningams and traveller controls. Acetal sheaves run on stainless steel ball bearings. Max. working load: 550 lbs. 3/4 Sheave diameter 1/4 Line (max.) Swivel Shackle Head Order No Mfg No Type List RF20100 Single Block $ RF20202 Double Block $ RF20302 Triple Block $43.95 Ronstan Series 40-40mm All Purpose Blocks - Single, Universal Head All purpose blocks typically used for mainsheet, halyard, vang and spinnaker sheets on boats up to 8 meters (26 ft.) as well as general service applications on larger boats. UV stabilized Acetal sheaves provide bearing performance on a polished stainless steel race. Maximum working load: 880 lbs. Series /16 Sheave diameter 7/16 line (max.) Order No Mfg No Type List RF41100 Sgl. Block - Universal Head $29.95 RF571 Ronstan Lightweight Blocks Order No Mfg No Type List RF RF573 RF573 Sgl. Block Loop Top Sgl. Block Swivel Shackle Top $12.40 $19.10 Ronstan Series 30-30mm Ball Bearing Blocks with Single, Swivel Shackle Head Typically used as primary lead blocks on dinghies and catamarans. Also for some control applications on larger boats. Two-stage ball bearing system. Block cheeks are molded in fiber reinforced Zytel. Acetal ball bearings and sheaves. Stainless steel load straps and head fittings. 1-1/8 Sheave diameter 5/16 Line (max.) Order No Mfg No Type List RF30100 Sgl. Block Swivel Shackle Head $ Prices and specifications subject to change without notice. Ronstan Series 50-50mm All Purpose Blocks - Single, Universal Head Typically used on boats up to 10 meters (33 ft.) for main and spinnaker sheets, halyards and other primary applications. Load ratings 1650 lbs. UVstabilized Acetal sheaves provide bearing performance on a polished stainless steel race that performs equaly well with dynamic and static loads. 2 Sheave diameter 1/2 line (max.) Order No Mfg No Type List RF51100 Sgl. Universal Head $36.95

14 Ronstan Eye Straps Stainless steel. Order No Mfg No A B C D List RF498 3/8 1/8 1-1/8 5/32 $ RF134 9/16 3/16 1-7/16 3/16 $ RF1055 5/8 1/4 1-3/4 1/4 $ RF /16 3/16 2-3/8 5/16 $10.30 Ronstan Flared Eye Straps Order No Mfg No A B C D List RF94 1/4 3/8 1-1/16 3/16 $ RF291 1/2 3/8 1-1/4 3/16 $6.20 Ronstan Pad Eyes Order No Mfg No A B C D E List RF415 13/16 5/ /16 $ RF /4 3-1/4 1-3/8 3/16 $25.70 Ronstan Deadeyes Provide a simple, low cost means of containing, re-directing, or correcting the direction of lines. Nylon construction with stainless steel liner RF59 9/16 $ RF2358 5/8 $15.40 Ronstan Boom Hanger Typically used on dinghies, catamarans and small keelboats. 10mm (3/8 ) internal clearance. 5mm (3/16 ) dia. loop RF87 $14.40 Whitecap Stainless Steel Round Rings S-261C 3/16 x 1 $ S-262C 1/4 x 1 $ S-263C 1/4 x 1-1/2 $ S-264C 5/16 x 2 $24.50 Ronstan Stainless Steel Snap Shackles Stainless steel. Heavy-duty plunger pin and precision components. Order No Mfg No A B C List RF6120 5/8 1/2 2-7/8 $ RF6210 5/8 5/8 3-5/8 $74.95 Deadeyes Boom Hangers Winch Handle Anchor Chocks Sea Dog It Floats Floating Winch Handle Patented design is made by way of air assist injection molding instead of foam filled method, thus preventing any potential leakage of foam from within the handle. Both sizes feature ball bearings in the handle to ensure smoother action under load. Also available is the dip molded PVC winch handle holder, Sea-Dog part number Order No Mfg No A List $35.10 Ronstan Stainless Steel Fixed Eye Snap Shackle Prices and specifications subject to change without notice. Order No Mfg No A B C List RF /32 3/4 3-15/16 $

15 Beckson HGA Series Plastic Hinges Will not rust, corrode, pit or deteriorate in marine environment including ultraviolet rays. High grade marine plastics. Applications: storage hatches, locker doors, engine or instrument covers. 270 operation allows hinge to rest with no strain in fully folded position. White. Sold in pairs. Order No Mfg No Dimensions List HGAP-11-W1 1.5 x 1.75 $ HGAP-22-W1 1.5 x 3 $ HGAP-33-W1 1.5 x 4 $9.50 Perko Non-Mortised Hinge Chrome plated stamped brass. Installs easily without mortising. 3-3/8 x 7/8 dimensions when closed. 2 per pack DPOCHR $36.45 Hinges Forespar Molded Marelon Hinges Molded in a special grade of very strong Acetal resin and have a stainless steel hinge pin. May be used on interior or exterior surfaces. U.V. stabilized. Black color. 2 per pack. Order No Mfg No Size (Length x Width) List /2 x 1-3/8 $ /4 x 1-3/8 $ x 1-3/8 $6.45 Perko Strap Hinge Chrome plated bronze. 1-1/2 x 3 Screw size: #8 2 per pack Perko Flush Hinge Semi-concealed for overlay doors. Chrome plated stamped brass. 2 per pack. Dimensions: 2-3/4 x 2-1/8. Screw size: # DPOCHR $29.63 Stainless Steel Continuous Hinge Pre-drilled for #6 screws. 12 screws per foot. Holes on 2 centers. 6 ft. lengths but also sold by the foot X72PC 1-1/4 $ X72PC 1-1/2 $ X72PC 2 $ DP1CHR $80.15 Perko Inset Hinge Chrome plated stamped brass. Installs easily without mortising. 3-3/8 x 7/8 dimensions when closed. 2 per pack DPOCHER $29.63 Perko Butt Hinges Removable pin. 2 per pack. Order No Mfg No Material Dimensions List DP9CHR Chrome Plated Zinc 3 x 3 $ DP6CHR Chrome Plated Zinc 2-1/2 x 2-1/2 $ DP2CHR Chrome Plated Brass 2-1/2 x 2-1/2 $49.88 Whitecap Heavy Duty Stamped Stainless Steel Offset Butt Hinges Sold in pairs. Order No Mfg No Length Width Screw Size List S-3425P 1-3/8 1-1/2 #8 $ C 1-1/2 2-1/4 #8 $37.85 Perko Offset Hinge Chrome plated zinc. Length open: 1-1/2 ; Width overall: 1-1/2 ; Offset: 3/8 ; Screw size: #8. Sold in pairs DP1CHR $24.00 Whitecap Heavy Duty Stamped Stainless Steel Shortside Door HInge Sold in pairs. 176 Prices and specifications subject to change without notice. Order No Mfg No Length Width Screw Size List S-3436P 1-1/2 2-1/4 #8 $19.10

16 Whitecap Stamped Stainless Steel Butt Hinges Sold in pairs. Order No Mfg No Length Width Screw Size List S-3415P 1-1/2 1-1/4 #8 $ C 1-1/2 1-1/2 #10 $ S-3416P 2 1-1/2 #8 $ S-3422C 2 2 #8 $ S-3417P 2-1/2 1-11/16 #8 $ S-3418P 3 2 #8 $ S-3421C 3 3 #8 $ S-3419P 3-1/2 2-1/4 #8 $ S-3420P 4 2-7/8 #8 $ C 2 2 #10 $26.33 ßWidthà ßLengthà Whitecap Take Apart Motor Box Hinges Stainless steel. Non-locking sold in pairs. Locking sold individually. Order No Mfg No Length Width Screw Size Type /8 1-1/2 #10 Locking $ /8 1-1/2 #10 Non-Locking $19.88 Whitecap Take Apart Motor Box Hinges Chrome plated brass. Fastener: #10 (4). Sold in pairs. Order No Mfg No Length Width Screw Size List S-991C 3-7/8 2-1/16 #10 $29.33 List Whitecap Heavy Duty Stamped Stainless Steel Strap Hinges Sold in pairs. Order No Mfg No Width Length Screw Size List C 1 4 #10 $ C 1 6 #10 $ S-3428P 1-1/8 4 #8 $ S-3430P 1-1/8 6 #8 $26.73 Whitecap Stainless Steel T-Strap Hinges An extra heavy duty cast stainless steel T hinge for transom doors, motor boxes and engine hatch covers. Size: 3-7/8 x 7-3/4. Predrilled for eight #12 fasteners $48.33 Hinges Whitecap Heavy Duty Stamped Stainless Steel Door Hinges Sold in pairs. Order No Mfg No Material Length Width Screw Size List S-3433P 304 SS 1-1/2 3 #8 $ C 316 SS 1-1/2 3 #8 $ SS 1-1/2 4 #8 $35.98 Whitecap Chrome Plated Zamak Door Hinge Sold in pairs. Order No Mfg No Length Width Screw Size List /2 #8 $10.20 Whitecap Shortside Door Hinge Sold in pairs. Order No Mfg No Length Width Screw Size List C 2-1/4 1-1/2 #8 $ C 3 1-1/2 #8 $30.25 Whitecap Chrome Plated Zamak Butt Hinges Sold in pairs. Length: 2 ; Width: 2. Screw size: # S-1497 $10.50 Whitecap Stainless Steel Hatch Hinges Sold in pairs. Order No Mfg No Type Length Width Screw Size List Standard 3 2-1/2 #10 $ Angled 3 2-1/2 #10 $34.05 Whitecap Stainless Steel 2-Pin Flush Hinges Highly polished 316 stainless steel. Requires 6 #8 screws for installation. Sold in pairs. Prices and specifications subject to change without notice. Order No Mfg No Dimensions List S3700C L x 1-9/16 W $ S3705C 2-3/4 L x 1-1/2 W $

17 Door Bumper Door Holder Cabin Door Hooks Hasps Southco Black Adjustable Torque Hinge Holds doors open, in position. User-adjusted holding torque. Acetal nylon with zinc plated mounting hardware. 301: Forward/Reverse Torque: Nm (6.99 in-lbf) 501: Forward/Reverse Torque: Nm (35.00 in-lbf) Sold individually. Order No Mfg No Length List E E H 1.44 W 2.50 H 2.25 W N. A. Taylor Door Pads Adhesive-backed rubber, 3/4 x 3/4, cushions windshield doors. Two per package. Black $5.53 Sea Dog Door Bumper Chrome plated brass. Provides a cushion for door knob and protects bulkhead. #6 screws required for installation (not included). Overall diameter: 1-7/8. Height: 5/ $7.55 $14.61 $22.41 Whitecap Door Holder with Cushion Has a latching feature which automatically latches the door against the rubber cushion when the door is fully opened against it. Door is easily released by depressing latch. Can be mounted anywhere and has no sharp edges. Includes striker plate for door. Base Diameter: 2. Standoff: 2-7/ S-0040C $28.43 Sea Dog Door Holder with Cushion Stainless Steel Door Stop holds the door securely against the rubber stop reducing rattles which are common with most door hooks. The spring loaded latch allows for quick and easy release. Standoff: 4. Base diameter: 2-1/ $35.25 Perko Door Stop and Holder Chrome plated bronze. Rubber bumper. O.D.: 1-3/4 Stop screw size: #8 Keeper screw size: #6 Order No Mfg No Length List DP1CHR 2-3/8 $ DP2CHR 3-1/4 $ Perko Cabin Door Hook Chrome plated zinc. Order No Mfg No Length List DP1CHR 2 $ DP2CHR 2-1/2 $ DP3CHR 3 $13.58 Perko Cabin Door Hook Chrome plated cast bronze. Order No Mfg No Length List DP1CHR 1-1/2 $ DP2CHR 2 $ DP3CHR 2-1/2 $ DP4CHR 3 $ DP5CHR 3-1/2 $ DP6CHR 4 $43.75 Whitecap Cabin Door Hook Overall length: 2-1/4 long. Rugged, durable chrome plated brass construction. Ideal for all types of gates and doors. Each hook pre-drilled for #6 screws S-1401C $8.25 Perko Rubber Bumper Door Stop Chrome plated zinc. 1 long. 1-1/4 O.D. Screw size: # DPOCHR $10.30 Replacement Bumper A $4.00 Perko Stainless Steel Door Holder Stainless steel clip. Chrome plated zinc arrow. Arrow dimensions: 1-5/8 x 3/4 Clip Base dimensions: 1-3/8 x 7/16 Projection: 1-3/4 Screw size: # DPOCHR $ Prices and specifications subject to change without notice. Whitecap Safety Hasp Stainless steel. Order No Mfg No Dimensions List S-4052C 1 x 3 $13.08

18 Perko Fixed Eye Hasp Chrome plated bronze. 1 wide. Padlock clearance is 9/32. Order No Mfg No Length List DP1CHR 2 $ DP2CHR 3 $51.95 Whitecap Barrel Bolt Chrome plated brass. Length: 2-1/2. requires (6) #5 screws S-585C $10.28 Sugatsune Stainless Steel Slide Bar Latch Material: 304 Stainless Steel Finish: Satin Supplied with stainless steel screws. Order No Mfg No Length List KR-50 2 $ KR /2 $15.50 S-579C & S-4051C Whitecap Swivel Safety Hasp Chrome plated brass. Easy swivel holds catch securely. Ideal for cabin doors, cupboards, chests, lockers, hatch doors, etc. Order No S-579C Mfg No Material Dimensions C/P Brass S-4051C 304 SS S-1400C C/P Zamak S-1400C Perko Swivel Eye Hasp Chrome plated zinc. Padlock swivels to act as a latch. 1 x 3 dimensions when closed. Padlock clearance is 11/32. List 1 x 3 $ /4 x 3 1-1/8 x 3 $17.33 $ DPOCHR $25.98 Perko Ship Bolt Chrome plated bronze. Supplied with brass friction spring to eliminate rattle and provide smooth operation. Overall dimensions: 2-5/8 x 1-1/4. Screw size: # DPOCHR $55.18 Perko Barrel Bolt Chrome plated bronze. Supplied with friction pad to eliminate rattle and provide smooth operation. Order No Mfg No Dimensions List DP1CHR DP2CHR 3-7/16 x 1-7/16 4-5/16 x 1-7/16 $47.35 $51.33 Sugatsune Spring Barrel Bolt Material: Body & Plate Stainless Steel Bolt & Knob -Brass Finish: Body & Plate - Satin, Bolt & Knob - Nickel Order No Mfg No Length List BL-40SS 1-1/2 $ BL-60SS 2-3/8 $17.50 Sea Dog Barrel Bolt Chrome plated extruded brass. Order No Mfg No Length List /2 $ $9.06 Sea Dog Barrel Bolt Sand cast chrome plated brass. Overall length: 2-7/8 ; Width: 3/4 Height: 1/2. Requires 6 #5 screws $9.60 Ship Bots Barrel Bolts Hasps Slide Bolts Attwood Security Swivel Hasp Stamped Stainless steel. Swivel eye turns to secure hasp and keeps compartment shut even without use of padlock. Four holes for #8 screws. Dimensions closed: 2-1/4 x $14.10 Whitecap Stainless Steel Spring Loaded Slide Bolt Length: 5-5/16. Includes internal and external keepers S-588C $58.18 Prices and specifications subject to change without notice. Sugatsune Stainless Steel Spring Loaded Barrel Slide Bolts Order No Mfg No Length List BLS60 3-3/8 $ BLS90 4-9/16 $

19 Perko Drawer Knob Chrome plated brass with stainless steel screw. 1 O.D. Maximum panel thickness: 1-1/ DPOCHR $17.53 TH Marine Door Restraint Strap Restrains doors, hatches and lids. PVC coated stainless steel cable. Stainless steel eye ends. Supports up to 250 lbs. 13 long DRS-1-DP $11.49 Perko Flush Pull Chrome plated zinc. Dimensions face plate: 3-11/16 x 1-11/16. Depth: 7/16. Screw size: # DPOCHR $20.78 Door Restraint Strap Hold Down Clamp Flush Pull Drawer Knobs & Pulls N.A. Taylor Door Catches For walk-thru windshields and other doors. Holds door firmly in place against vibration and motion. Black thermoplastic, consisting of ball and stud, catch and screws. One set per package $ DPOCHR Perko Hold Down Clamps Chrome plated bronze. Flat or angle mounting. Flat mount dimensions: 3 x 1-1/2. Angle mount dimensions: 2-1/2 x 1-1/2 1113DPOCHR Order No Mfg No Mounts List DPOCHR Flat $ DPOCHR Angle $92.43 Perko Flush Pull Chrome plated zinc. Black plastic finishing flange. Spring loaded, can be mounted horizontally or vertically. Flange dimensions: 3/4 x 3-1/4. Screw size: # DPOCHR $18.38 Perko Drawer Pull Chrome plated zinc. Width overall: 3-7/16. Width inside: 2-5/16. Screw size: # DPOCHR $15.30 Perko Flush Ring Pull Chrome plated bronze. Face plate dimensions: 2-9/16 x 2. Screw size: # DPOCHR $47.93 Perko Door Buttons Chrome plated zinc. Black plastic knob. Supplied with phosphor bronze tension spring DPOCHR $ Prices and specifications subject to change without notice.

20 Sugatsune Plastic Rotary Catch Material: Catch - Polyacetal, Strike - Polyacetal, Roller - Polyethylene. Color: Natural White. Screws not included $1.00 N. A. Taylor Turn Catches Simple twist latch for securing walk-thru windshields or other hatch openings. Black thermoplastic complete with self-tapping screws. 2 per package. Order No Mfg No Only $5.53 Perko Elbow Catch Chrome plated zinc. Stainless steel spring. Dimensions: 1-1/8 x 9/16. Screw size: # DPOCHR $16.38 Perko Plastic Door Catch Black plastic. Dimensions stud: 1-1/8 x 3/8 ; catch: 1-3/8 x 7/8. Screw size: # DP $7.40 N.A. Taylor Utility Latch Easy to install latch for hatches, windows, doors and other applications. Rugged nylon complete with mounting screws. (sold in pairs) $24.43 Perko Elbow Catch Black Plastic, integral spring. Dimensions: 1-3/16 x 5/8. Screw size: # DPOBLK $6.48 Perko Plastic Door Catch White plastic. Stainless steel spring. Chrome plated brass screw. Dimensions of catch: 1-1/4 x 5/8. Screw size: # DP $11.25 Whitecap Stud Catches Stainless steel spring & ball. 2 per pack. S-5031C is chrome plated brass. S-5032C & 5033C are plain brass. Order No Mfg No Dimensions List S-5031C S-5032C S-5033C 1-3/4 L x 5/16 W 1-15/16 L x 3/8 W 2-1/4 L x 7/16 W $9.75 $12.38 $18.00 Door Catches & Latches Cam Lock Seadog Roller Catch - Surface Mount Injection molded nylon with stainless steel springs. Order No Mfg No A B C D E List /16 13/16 5/8 5/8 1-1/16 $ /8 1-3/16 7/8 13/16 1-3/8 $9.54 Sierra Cam Locks Secures lockers, hatches, compartments and drawers. Order No Mfg No Depth List CL /8 $ CL /8 $ CL /8 $ CL /8 $12.99 Prices and specifications subject to change without notice. 181

21 Flush Latches Anchor Handle Locks Slam Latches 1092DP1BLK 1091DP1BLK Perko T Handle Surface Mount Lock & Latch Surface mount lock and latch for smooth and carpeted surfaces (gasket included for smooth surface application). Polymer body with chrome plated zinc alloy T handle. Stainless steel stem. Easily installs in a 2-1/2 diameter hole for mounting surfaces 1/8 to 3/4 thick. Face plate diameter: 3. Comes with Perko #1 Offset Cam Bar A. Other style cam bars available on special order. Order No Mfg No Color Type List DP1BLK Black/Chrome Handle Non-Locking $ DP1WHT White/Chrome Handle Non-Locking $ DP1WHT White/Chrome Handle Locking (2 Keys) $ DP1BLK Black/Chrome Locking (2 Keys) $ DP1 Cam Only 0932DP2 Cam Only Perko Flush Latch 0932DP3BLK Chrome plated zinc with black plastic face. Stainless steel stem and lock nut. Nonlocking with offset cam bar and flexible plastic strike. Detents indicate open or closed position. Easily installs in a 2 diameter hole. For door thickness: 1/4-1-1/8. Dimensions of face plate: 2-1/2 x 2-1/2. Supplied with Perko No. 1 Offset Cam Bar A. Other style cam bars available on special order. Order No Mfg No Color List 0932DP3 Cam Only DP1BLK Black $ DP1WHT White $ DP2BLK Black $ DP2WHT White $ DP3BLK Black $ DP3WHT White $42.15 Perko 1082 Flush Latch For smooth or carpeted surfaces (Includes gasket for smooth surface applications). Black or white polymer. Stainless steel D ring handle. Two O-rings for increased water resistance. Position indicator shows open or closed position. Face plate dimensions: 2-7/8 x 2-7/8. Non-locking. Installs easily in a 2-3/8 diameter hole. For mounting surfaces 3/8 to 7/8 thick. With offset cam bar and flexible polymer strike. Supplied with Perko No. 1 Offset Cam Bar A. Other style cam bars available on special order. Order No Mfg No Cam Bar Adjustment Color List DP1BLK 3/8 to 3 Black $ DP1WHT 3/8 to 3 White $40.23 Over 350 brand name manufacturers. Enormous, strategically located warehouse to support all of our customers. We can stock more inventory and buy in larger quantities which helps us keep our prices low. Selection second to none. 120 years combined marine experience within our sales team - we can find what you need! Exclusive Wesmar distributor. Hours: 8:00 a.m. - 4:30 p.m. - Monday - Friday. Knowledgeable & friendly staff ready to help you. Call Debbie Senti ext. 313 Call Jim Haun ext. 304 Call Lou Moran ext. 314 TH Marine Anchor Handle Locks Easy Grip Two Finger handle. Waterproof O Ring Seals. For lids up to 3/4 thick. Fits 2-3/8 to 2-1/2 Hole. Order No Mfg No Type Color List ALC-1-DP Locking Black w/chrome Handle $ ALCN-1-DP Non-Locking Black w/chrome Handle $39.09 TH Marine Nautical Slam Latches Low profile oval design. UV stable - corrosion resistant. Stainless steel striker plate. Fits 2 round hole. Fits 1/16 to 7/16 thick lids. Order No Mfg No Color List NFSL-5-1-DP Black $ NFSL-5-2-DP White $ Prices and specifications subject to change without notice.

22 M1-43 M1-63 & M1-64 M163-8 & M164-8 M Whitecap Nylon Compression Handle Nylon compression handle with 1-3/8 shaft. 3 O.D. Cut-out required: 2-1/2. Note: S-226SO Offset cam is included. M M & M M , M1-43-8, M1-43-8, M1-44-8, Southco Push-to-Close Latches M Flush. Pull to open. Keylocking style restricts access. Corrosion-resistant materials. Inside actuation when locked or unlocked. Single, round-hole installation. Outside diameter Small: 1.73 : Medium: ; Large:. Order No Mfg No Size Color Panel Thickness M Small M Small M1-43 Med M Med M Med M Med M1-63 Med M Med M1-64 Med M Med M Med M Med M M Large Large Spacer for Push-to-Close Latches Stainless Steel Stainless Steel Black Plastic White Plastic Stainless Steel Stainless Steel Black Plastic White Plastic Black Plastic White Plastic Stainless Steel Stainless Steel Stainless Steel Stainless Steel Min..075 Max.275 Min..075 Max.275 Min..475 Max..675 Min..475 Max..675 Min..475 Max..675 Min..675 Max..875 Min..475 Max..675 Min..475 Max..675 Min..675 Max..875 Min..675 Max..875 Min..475 Max..675 Min..675 Max..875 Min..475 Max..875 Min..475 Max..875 Type List Locking $77.80 Non- Locking $65.88 Locking $28.86 Locking $28.86 Locking $54.99 Locking $70.73 Non- Locking Non- Locking Non- Locking Non- Locking Non- Locking Non- Locking Non- Locking $25.50 $25.50 $25.50 $25.50 $59.10 $59.10 $95.80 Locking $ Order No Mfg No Description Size Color List M Spacer Small Stainless Steel $7.50 Order No Mfg No Type Color List BC Non-Locking Black $ BC Locking White $40.88 Whitecap 316 Stainless Steel Compression Handle Nylon compression handle with 1-3/8 shaft. 3 O.D. Cut-out required: 2-1/2. Note: S-226SO Offset cam is included. Order No Mfg No Type List S-235C Non-Locking $ S-236C Locking $95.28 Whitecap Nylon & Stainless Steel Compression Handle 316 stainless steel and nylon compression handle with 1-3/8 shaft. 3 O.D. Cut-out required: 2-1/2. Note: cam bar is sold separately. Order No Mfg No Type Color List B Locking Black $ W Locking White $ B Non-Locking Black $ W Non-Locking White $37.20 Whitecap Stainless Steel Mini Compression Handle 316 stainless steel. Shaft length: 1-1/2 ; O.D. 1-7/8 ; Cut-out 1-1/2. Includes cam bar S-239C $52.18 Push-To-Close Latches Lim Latch Sets Compression Latch Prices and specifications subject to change without notice. 183

23 Vise-Action Compression Latch Push Button Rim Latches Over 350 brand name manufacturers. Enormous, strategically located warehouse to support all of our customers. We can stock more inventory and buy in larger quantities which helps us keep our prices low. Selection second to none. 120 years combined marine experience within our sales team - we can find what you need! Exclusive Wesmar distributor. Hours: 8:00 a.m. - 4:30 p.m. - Monday - Friday. Knowledgeable & friendly staff ready to help you. Call Debbie Senti ext. 313 Call Jim Haun ext. 304 Call Lou Moran ext. 314 Southco Push-to-Close Pull-to-Open Plastic Latch Single, round hole installation. Flush pop out knob. Corrosion resistant materials. Polycarbonate and ABS plastic construction. Outside diameter of trim ring: 1.5 Threaded Housing diameter: 1.25 Door thickness: Min:.048 ; Max:.75 Order No Mfg No Finish List M1-2A-15-1 Chrome $ M1-2A-15-5 Black $ M1-2A-15-8 Gold $31.14 Southco Push-To-Close Locks Black, glass reinforced nylon housing. All non-corrosive parts. Black polyester knob. Stainless steel spring. Push the button to unlatch. Locking and non-locking styles available. Optional ejector spring helps prevent rattles. Dimensions: Maximum door thickness:.407 Dimension A 1.16 Dimension B.907 Dimension C.57 Dimension D 1.47 Order No Mfg No Type List Locking $ Non-locking $17.55 Key included Southco Stainless Steel Vise-Action Compression Latch Consistent pre-set compression. Easy grip adjustment. Premium finish and corrosion resistance. Includes 3 different cams. Southco tubular key operated. Door thickness:.71 max. Overall diameter: E /20/30 $87.73 Key for E /20/30 Vise-Action Compression Latch E $ Prices and specifications subject to change without notice.

24 Perko Cupboard Bolt Chrome plated zinc. Black plastic and knob. Overall dimensions: 2-1/8 x 1-1/2. Screw size: # DPOCHR $27.08 Perko Rim Latch Sets Chrome plated zinc. Sliding lock button. Regular bevel with box strike. For door thickness: 5/8-1-3/8. Case dimensions: 2-1/8 x 1-3/4. Escutcheon dimensions: 4-3/8 x 1-1/4. Screw size: # DPOCHR $ Perko Flush Lock and Latch Locking model shown. Chrome plated zinc locking latch with two keys. Installs easily in a 1-5/8 diameter hole. Locking model includes latch and 2 keys. Non-Locking model includes latch. Fits doors 1/2 to 3/4 thick. Face plate dimensions: 2-1/4 x 2. Order No Mfg No Type List DPOCHR Locking $ DPOCHR Non-Locking $45.45 Perko Rim Lock Sets Chrome plated zinc. Locked by turn button from inside or key from outside. Reverse bevel with flush strike DPOCHR $ Perko Mortise Lock Sets Chrome plated zinc. Locked by turn button from inside or key from outside. For door thickness: 1-1/3/8. Base dimensions: 2-3/4 x 2. Escutcheon dimensions: 4-3/8 x 1-1/4. Screw size: # DPOCHR $ Cupboard Bolt Rim Latch Sets Mortise Latch Sets Perko Rim Latch Set Chrome plated zinc. Sliding lock button. Reverse bevel with flush strike. For door thickness: 5/8-1-3/8. Case dimensions: 2-1/8 x 1-3/4. Escutcheon dimensions: 4-3/8 x 1-1/ DPOCHR $ Perko Mortise Latch Set Chrome plated zinc. Turn button lock. For door thickness: 1-1-3/8. Case dimensions: 2-1/4 x 1-13/16. Escutcheon dimensions: 4-3/8 x 1-1/4. Screw size: #6. Prices and specifications subject to change without notice DPOCHR $

25 Push-To-Close Latch T-Handle Draw Latches Grabber Catches ß 2-1/4 à Sugatsune Safe Push Latch Strong retaining force 8kg (17.6 lbs). Material: ABS Plastic. 5/8 thick. ß1-1/2 à Order No Mfg No Color List MC37/BLK-1 Black $ MC37/WHT-1 White $6.90 F7-51 F7-53 Southco Draw Latches Flexible T-Handle Style Non-corrosive, non-conductive, UV-resistant materials. Compensates for misalignment in 3 planes. Absorbs and reduces vibration. Built-in drag keeps latch stationary when unlatched. Order No Mfg No Type Length When Latched Width at Handle F7-51 Concealed Mount $ F7-53 Front Mount $12.00 Southco Flexible Draw Latches Soft latch series. Non-corrosive, UV-resistant materials. Compensates for misalignment in 3 planes. Absorbs and reduces vibration. Built-in drag keeps latch stationary when unlatched C7-10 $19.00 List Southco Grabber Catch Pull to open. Corrosion-resistant materials. Spring-loaded over-center latching. 302 stainless steel screw. Black ABS housing. 5 lb. approximate pull-up force. Catch dimensions: 1.6 high, 1.11 deep,.54 wide. Keeper dimensions: 2.83 high,.94 deep,.45 wide. Order No Mfg No Pull-up Force Color Installation List C lb. Black Rivet / Screw $ C3-805-W 5 lb. White Rivet / Screw $ C lb. Black Rivet / Screw $ C3-810-W 10 lb. White Rivet / Screw $ C lb. Black Snap-In $ C lb. Black Snap-In $8.52 Over 350 brand name manufacturers. Enormous, strategically located warehouse to support all of our customers. We can stock more inventory and buy in larger quantities which helps us keep our prices low. Selection second to none. 120 years combined marine experience within our sales team - we can find what you need! Exclusive Wesmar distributor. Hours: 8:00 a.m. - 4:30 p.m. - Monday - Friday. Knowledgeable & friendly staff ready to help you. Call Debbie Senti ext. 313 Call Jim Haun ext. 304 Call Lou Moran ext Prices and specifications subject to change without notice.

26 Sugatsune Push Latch Material: Latch Body - Polyamide. Push Button - Brass. Push Button Base - Zinc Alloy. Supplied with stainless steel screws (3x16, 3x20). When ordering, please specify both push knob and latch body which are sold separately. Order No Mfg No Finish List TLP-BB/SN Satin Nickel $ TLP-BB/PB Polished Brass $ TLP-BB/CR Chrome $ TLP-BB/SB Satin Brass $15.50 Latch Body Only TLP/LBM/WHT $14.00 Sugatsune Stainless Steel Bar Latch Material: 304 stainless steel. Supplied with stainless steel screw. Order No Mfg No Length List SSL-50 2 $ SSL-70 3 $9.00 Sugatsune Push Knob Latch Material: Latch Body - ABS Plastic; Push Knob - Zinc Alloy; Counter Plate - ABS Plastic. When ordering, please specify both push knob and latch which are sold separately. Supplied with screws. Push Knob Order No Mfg No Finish List PKL-08/GA Gold $ PKL-08/CR Chrome $ PKL-08/BN Black Nickel $21.50 Latch Order No Mfg No Finish List PKL-S/ WHT PKL-S/BLK Sugatsume Draw Latch White Latch Body Black Latch Body Material: 304 Stainless Steel Finish: Satin Recommend screws: M3 Screws not included. 1-37/64 overall length wide STF-40 $13.50 Sugatsune Draw Latch Material: 304 Stainless Steel. Finish: Polished. Recommend screws: M4 Screws not included. 3-7/32 overall length. 1-17/64 wide STF-82L $38.00 $4.80 $3.90 Prices and specifications subject to change without notice. Sugatsume Magnetic Catch Sealed strike plate for magnetic catches. Eliminate metal particles by using together with MC-JM sealed magnetic catches. Same design as MC-JM45WT. Marked blue on back side to distinguish strike plate from magnet. Order No Mfg No Color List MC-JM50/WT White $ MC-JM50/BL Black $9.50 Sugatsume Stainless Steel Counter Plate Special plate for JM magnetic catches. High corrosion resistance ideal for outdoor application Material: 316 Stainless Steel(special) Finish: Plain MC-JM49 $1.60 MC-JM45WT Sugatsune Sealed Magnetic Catch Hermetically sealed. Strong magnetic force. Counter plate sold separately. Use MC-JMP45 or MC- JM45. Application for clean room and water environment. Screws not included. Recommended screw size: M4 binding head. Both Magnetic Catch and Strikeplate are designed identical except that only the Magnetic Catch has a magnet embedded in it, the Strikeplate has metal embedded. Order No Mfg No Item List MC-JM45WT MC-JMP45 Magnetic Catch $ MC-JMP45 Strikeplate $ Push Latches Magnetic Catch Draw Latches Magnetic Catches

27 Shelf Brackets Cup Hooks Brackets Sea Dog Industries Stainless Steel Angle Brackets Uses fastener size #8 flat head. Order No Mfg No A B C D E List /8 2-3/8 1-3/16 1-3/16 9/16 $ / /16 9/16 $11.40 Corner Bracket Stainless Steel Brackets Stainless steel, phillips head screws included. 2 per pack. Flat Corner Brace Straight Mending Brace Order No Mfg No Type Size List N Corner 1 x 1/2 $ N Corner 1-1/2 x 1/2 $ N Corner 2 x 5/8 $ N Corner 4 x 7/8 $ N Flat Corner Braces 2 x 3/8 $ N Flat Corner Braces 3 x 1/2 $ N Flat Corner Braces 4 x 3/4 $ N Straight Mending Braces 2 x 1/2 $ N Straight Mending Braces 3 x 5/8 $ N Straight Mending Braces 4 x 5/8 $6.65 Sugatsune Wire Hook Material: 304 stainless steel. Finish: Polish. Order No Mfg No Size Degree List TF-20 3/4 180 $ TF /2 180 $ TL $ TL $2.00 Stainless Steel Cup Hooks N /4 $ N /2 $4.49 Over 350 brand name manufacturers. Enormous, strategically located warehouse to support all of our customers. We can stock more inventory and buy in larger quantities which helps us keep our prices low. Selection second to none. 120 years combined marine experience within our sales team - we can find what you need! Exclusive Wesmar distributor. Hours: 8:00 a.m. - 4:30 p.m. - Monday - Friday. Knowledgeable & friendly staff ready to help you. Call Debbie Senti ext. 313 Call Jim Haun ext. 304 Call Lou Moran ext. 314 Call Bob Leatherman ext Prices and specifications subject to change without notice.

28 Sugatsune Stainless Steel Drawer Slide Load rating: 64 ~ 92 lbs. Three member. Material: 304 stainless steel. Full extension. Front disconnect. Non-handed. Screws not included. Order No Mfg No Length List ESR $ ESR $ ESR $ ESR $ ESR $ ESR $ ESR $ ESR $ ESR $ Perko Table Leg Fastener Chrome plated brass. Black plastic knob with stainless steel stud. Length Angle: 1-3/8. Width angle: 1. Screw size: # DPOCHR $54.30 Perko Table Brackets Chrome plated brass. For removable tables. Supplied in sets consisting of two brackets and two wall plates. Angle bracket dimensions: 2-3/4 x 1-11/16. Wall plate dimensions: 3-3/8 x 2. Screw size: # /DP $68.65 Sea Dog Folding Table Support Bracket Stamped 304 stainless steel. Order No Mfg No A B C Load Capacity /2 15/ / lbs. $76.55 List Specialty Items for Hatteras Yachts Order No Item Mfg No List C/P Trim Plate $ Plastic Clamshell Vent X $ Locker Light Switch $ Nylon Back Drawer Guide $ Drawer Stop $ Drawer Socket $ Nylon Sheave $ Nipple w/1-1/8-12 Thread $ Mounting Flange $ Dockside Quick Coupling K $ Quick Connect w/nipple $ Neoprene Light Grommet $ Black Gasket $2.00 Drawer Slide Table Leg Fastener Table Brackets Hatteras Prices and specifications subject to change without notice. 189

29 Perko Utility Hook Chrome plated zinc alloy. Length overall: 1-5/16 Width overall: 1/2 Screw size: 6 Sold in pack of 5. Order No Mfg No Pack List DPOCHR 5 $15.45 Whitecap Bronze Trigger Snap Order No Mfg No Hook Eye Length List S-1100P 7/16 1/2 2-3/8 $6.93 Perko Utility Hook Chrome plated zinc. Projection: 1-3/8. Width base: 1-1/8. Screw size: # DPOCHR $6.30 Perko Utility Hook Chrome plated zinc. Fast Eye Boat Snaps Stainless steel. Order No Mfg No Size Hook Eye Length List SNS /16 2-1/8 $ SNS /8 2-7/8 $ SNS /4 3-1/4 $ SNS /4 3-3/4 $19.35 Hooks & Snaps DP1CHR $6.95 Whitecap Hammock Hooks 304 stainless steel. 1/2 long. 1-1/4 wide. 3/4 deep. Requires #8 fasteners S-182C $2.68 Sea Dog Fixed Snap Shackle Stainless steel. Order No Mfg No Size Hook Eye Length List /16 5/8 2-7/8 $ /2 3/4 3-13/16 $ /16 3/4 3-13/16 $12.30 Whitecap Stainless Steel Swivel Eye Snaps Sugatsune Stainless Steel Friction Swing Hook Swivels 180 degrees. Hook has constant torque when swiveling, ideal for vibration or shock application. Order No Mfg No A B C List TK-45F $2.80 Whitecap Swivel Eye Baby Snap Chrome plated Zamak. Eye: 3/8 Length: 1-7/8 Order No Mfg No Eye Length List S /8 1-7/8 $6.05 Swivel Eye Baby Snap Bronze. Order No Mfg No Eye Length List WC334B 3/8 2 $ SNB /8 3-1/4 $4.44 Whitecap Brass Swivel Eye Snaps Polished brass. 190 Prices and specifications subject to change without notice S-4021C 5/8 $ S-4022C 3/4 $ S-4023C 7/8 $19.90 Order No Mfg No Hook Eye Length List S-1104C 5/8 3/4 3-1/4 $ S-1105C 7/8 3/4 3-3/4 $ S-1106C 1 7/8 4-9/16 $14.35 Whitecap Fixed Eye Snaps Polished brass. Order No Mfg No Size Hook Eye Length List S-1120C 0 5/8 3/8 2 $ S-1121C 1 5/16 5/8 2-7/8 $ S-1122C 2 7/16 11/16 3-1/4 $ S-1123C 3 1/2 3/4 3-5/8 $14.08

30 Whitecap Alpine Hooks High grade stainless steel. Order No Mfg No Stock Hook Eye Length List S-1110C 1/4 3/8 3/8 2-3/8 $9.40 Attwood Snap Hook Heavy-duty malleable iron. 4 x 2-1/4. Spring snap closure lb. average breaking strength S-1111C 5/16 7/16 7/16 3-1/8 $ S-1113C 3/8 9/16 1/2 4 $ S-1106C 7/16 5/8 11/16 4-3/4 $ $8.05 Attwood Steel Utility Snap Hook Regular Duty Zinc-plated steel with spring-loaded closures. Length: 3-1/2 Diameter: 5/8 Maximum safe load: 2000 lbs $6.10 Stainless Steel Snap Hook with Eye Insert The asymmetrical snap with eye insert provides for the secure attachment to lines for use on safety harnesses, fishing lines, mooring buoy lines, etc. Formed 316 stainless steel. Order No Mfg No A B C D Capacity List /4 2-3/8 1/4 7/16 1,160 lb. $ /16 3-1/4 7/16 1/2 2,300 lb. $ /8 4 9/16 11/16 3,600 lb. $14.58 Stainless Steel Reefing Hook Formed stainless steel. Order No Mfg No A B C List /8 3-1/2 1/2 $12.75 Snap Hooks Alpine Hooks Reefing Hook Lashing Hook Cargo Hooks Order No Mfg No Capacity List HK22 3/4 Ton $ HK23 1 Ton $11.70 Stainless Steel Lashing Hook Formed 304 stainless steel. Order No Mfg No A B C List /16 2-3/4 1/4 $9.36 Prices and specifications subject to change without notice. 191

31 Perko Flush Ring Pull Chrome plated zinc. Order No Mfg No O.D. List DP1CHR 1-5/8 $ DP2CHR 2 $18.38 Perko Flush Lifting Handle Chrome plated brass. Screw size: #8. Note: 776DP2 has all four screw holes in corners. SeaDog Hatch Handle/Latch Stainless steel. Base: 3 X 3-3/4 Depth of latch rod: 5-5/ $71.18 Order No Mfg No Dimensions List Whitecap Flush Lift or Stainless steel. For opening hatches. 1.5 x 1.9. Predrilled for four #8 fasteners C $ DP1CHR 3 x 2-1/4 $ DP2CHR Chrome Plated Zinc 2-3/16 x 1-3/16 $85.63 Order No Mfg No Dimensions List DPOCHR 3 x 2-1/4 $20.78 TH Marine Large Lid Lifts Large 3-finger opening. Convenient rectangular shape. Easy to install. Size: 3-1/2 x 2-1/4 Order No Mfg No Color List LLR-1-DP Black $4.92 Lifting Handles Stern Handles Lid Lifts Whitecap Lifting Handle Excellent for most hatches, cabinets, and drawers. Extremely corrosion-resistant marine stainless steel. Takes #8 flat head fasteners. Dimensions: 2-1/4 x 2-5/ S-222C $10.45 Perko Flush Ring Pull Chrome plated zinc. Face plate dimensions: 1-3/4 x 1-3/8. Screw size: # DPOCHR $16.60 Whitecap Lifting Handle Strong and large enough for hatch covers. Extremely corrosion-resistant marine stainless steel. Takes #8 flat head fasteners. 2-1/4 x S-223C $10.13 TH Marine Lid Lifts Injection molded poly. Bottom cup prevents water from entering box. Order No Mfg No Color Size List LL-1-DP Black LL-2-DP White 2-3/4 x 2-3/4 2-3/4 x 2-3/4 $4.92 $4.92 Perko Plastic Flush Pull Black plastic. Easily installs in a 1-3/4 diameter hole. Dimensions: 2-1/4 x 2-1/4. Order No Mfg No Color List DP0BLK Black $ DPOWHT White $4.25 Marine East Retractable Hatch Lift Prevents toe stubbing or tripping. Designed with large undercut for easy handling. Stainless steel stop nut acts as a weight to retract pin. Recommended for small to medium size hatches. Composite material will not rattle. Does not absorb heat. Order No Mfg No Color List Black $ W White $5.58 Perko Flush Ring Catch Chrome plated zinc. Phosphor bronze spring. Overall dimensions: 2-1/4 x 1-3/8. Screw size: # DPOCHR $28.05 Sea Dog Hatch Cover Pull Stamped 304 stainless steel. Order No Mfg No A B C D List /16 1-1/4 1/8 3/16 $ Prices and specifications subject to change without notice.

32 Perko Handle Chrome plated bronze. Length overall: 4-1/4. Length inside: 2-1/2. Height inside: 7/ DP1CHR $65.08 Perko Skene Bow Chocks Chrome plated bronze. Max. rope size: 7/8. Length overall: 7-1/4. Width: 1-3/8. Screw size: 5/ DPOCHR $13.48 Ready-Cleat Portable instant cleat that is used as an insert to the rod holder, when a fender is required for docking and no permanent cleat is available along the beam in the cockpit of a boat. ReadyCleat is inserted into any standard size rod holder, up to 9.5 in depth, providing an instant fender cleat RC $27.23 Whitecap Stern Handles Chrome plated Zamak construction. Predrilled for four #10 screws. Can be attached to the transom to assist swimmers and divers in boarding the boat, or in the bridge near the wheel to steady the helmsman in heavy weather. Overall length: 6. Grip: 3-1/4. Sold in pairs S-1462 $23.28 Whitecap Skene Bow Chocks Stainless steel construction. Sold in pairs. Order No Mfg No Size Line Size List C 4-1/2 1/2 $ C 6 3/4 $86.33 Whitecap Bow Chocks Stainless steel construction. Sold in pairs. Order No Mfg No Length Line Size List C 4-1/2 1/2 $ C 6 3/4 $65.95 Whitecap Junior Cleat Chrome plated brass. 2-1/2 long. Takes #8 fasteners S-541C $7.40 TH Marine Molded Nylon Cleats Tough nylon and molded for strength and UV resistance. Order No Mfg No Length List CLEAT-4.5-DP 4-1/2 $ CLEAT-6-DP 6 $ CLEAT-8-DP 8 $ CLEAT-10-DP 10 $8.67 Chocks Handles Cleats 6-1/2 Stainless Steel Utility Handle Overall length: 6-1/2 Base Width: 1-3/4 Fasteners: (4) #8 SS Self Tapping included N $10.50 Whitecap Straight Bow Chocks Stainless steel construction. Sold in pairs. Order No Mfg No Length Line Size List C 5 5/8 $ C 6 3/4 $54.30 Prices and specifications subject to change without notice. Forespar Marelon Low Profile 6 Cleat Hole diameter: 1/ $

33 Whitecap Zamac Hollow Base Cleats Chrome plated Zamac construction. This stylish contemporary cleat has all the advantages of traditional hollow base designs. Predrilled for four fasteners. Order No Mfg No Length List S-1444C 4-1/2 $ S-1445C 6 $12.45 Whitecap Chrome Plated Brass Yacht Cleat Order No Mfg No Length List S-970C 5-1/2 $ S-971C 6-1/2 $ S-972C 8 $32.83 Accon Pop-Up Cleats Cleat pops up at the touch of a button simply push it back down when it is no longer needed and it locks in the flush position. In the up position, Pop-Up Cleats function exactly like conventional cleats. Made of marine grade 316 stainless steel. Order No Mfg No Length List /2 $ $ Cleats Whitecap Hollow Base Cleats Stainless steel construction. Order No Mfg No Type Size List C Standard 6 $ C Standard 8 $ C Standard 10 $ Standard 12 $ Heavy Duty 8 $ Heavy Duty 10 $ Heavy Duty 12 $ Heavy Duty 15 $ Accon Folding Cleat Mounts on surface of boat. No cut-outs or hole saws required. These cleats lock down when not needed, and spring up when release button is pushed in. No drain tubes or drain receptacles required. They do not leak into the boat. The most simple installation of any retractable cleat in the industry. Constructed of marine grade 316 cast S.S. and brightly polished. Stud mount (with hidden fasteners). Stud length is 1 1/2. Order No Mfg No Length List /2 $ $60.00 Whitecap Stainless Steel E-Z Push-Up Cleats Order No Mfg No A B C D E F List /4 1-3/4 2-15/16 4-1/2 1-7/16 5/8 $ /4 1-7/8 2-7/ /16 5/8 $ /4 1-15/16 4-1/ /2 3/4 $ Galvanized Dock Cleats Galvanized iron solid based dock cleats. Pre-drilled for 1/4 fasteners $ S-1520P 6 $ S-1521P 8 $ S-1522P 10 $ S $ $ $ Prices and specifications subject to change without notice.

34 S-Shape Dock Cleats Dock cleats are cast from Almag 35 aluminum alloy producing a high strength cleat with superior weather and salt water resistance. The wide, elongated base with recessed fasteners offers greater shear resistance than any other cleat design. First developed by S. King Fulton, Inc., over twenty years ago, this cleat has established a track record for strength and durability beyond that of any other cleat in its class CL 10 $ CL 12 $ CL 15 $54.69 Ronstan U-Bolt Stainless steel. Comes with top plate, backing plate, washers and nuts. 5/16 threaded, 1-1/8 U diameter, 1-1/2 U height RF541 $20.60 Whitecap Lifting Ring/Cleat Stainless steel. Figures for maximum working load have been determined on the basis of the load being applied in the direction of the axis of the shank. Predrilled for 5/8-11 bolt (not included). Order No Mfg No Diameter Length Max. Load List C 1-1/ lbs. $ C 1-1/ lbs. $ Lifting Ring Cleats Bow & Stern Eyes Whitecap Stainless Steel Bow Eye 304 stainless steel. Order No Mfg No Eye Stock Length of Threads Plate List S-5021P 1 3/8 2-1/2 3/4 x 2-1/4 $ S-5022P 1 3/8 3-7/16 3/4 x 2-1/4 $ S-5023P 1-1/2 1/2 3-7/16 3/4 x 3 $ S-5024P 1-1/2 1/2 4-3/4 3/4 x 3 $26.18 Whitecap Stern Eye 304 Stainless steel. Eye size: 1-1/2 Stock: 1/2 Thread length: 3-7/16 Plate size: 3-1/2 x 1-1/ S-5029P $21.25 Sea Dog Recessed Anchor Point Investment Cast 316 Stainless. Recessed area (or point ) for attaching a snap shackle, rope, hook, or whatever might need to be attached. Order No Mfg No A B C D E F List /8 3/ /2 2 $24.51 Prices and specifications subject to change without notice. 195

35 Whitecap Transom Gudgeon 316 stainless steel. Dimensions: 4-5/8 x 1-1/4 Pin: 5/16 Fasteners: # C $16.85 Whitecap Hawse Pipe 316 marine stainless steel hawse pipe. Flange 5-1/2 x 2-1/2. Interior hole 1-1/2 x 3-3/4. Depth:.88. Drilled for four #10 screws $34.98 Perko Deck Plate Key Plain zinc. 1-11/16 center to center between studs. Fits 2 deck plates. Length overall: 3-3/ /009/ZNC $5.88 Perko Deck Plate Key Chrome plated zinc. Compact size with hole for key chain. Will fit Perko 1-1/4 and 1-1/2 deck plates and many other slot type opening deck plates. Center to center of lugs: 1-1/8. Spade length: 1. Overall length: 1-3/ /DP/BLK $7.03 Groco Spanner Wrench Deck Plate Kit Groco strainers ARG, and SS have three holes in strainer cap which allow for use of a spanner wrench to tighten or loosen the cover before or after maintenance. Handtight is sufficient for a good seal but some boaters may prefer to snug the cover, or break the seal: when servicing with the aid of this wrench. Cast bronze with 1/4 diameter stainless steel pins on one side and 5/16 pins on the other side. Opens to fit deck plates and strainer covers with key holes up to 7 apart. Hole in the handle makes it easy to hang the wrench in a location convenient to strainer location SW-2531 $23.00 Deck Fills Chain & Rope Deck Pipes Deck Plate Keys Whitecap Hinged Rope Deck Pipe Chrome plated brass. Cover is hinged to allow flipping back and hauling the anchor line from below deck. Inside diameter is 1-1/ S-112C $26.25 Whitecap Chain & Rope Deck Pipe Chrome Plated Brass. Ideal for retracting rope in rope wells. Keeps deck uncluttered. For up to 3/4 rope. Flange diameter is 4 ; inside diameter is 1-3/ S-113P $38.45 Perko Adjustable Deck Plate Key Chrome plated zinc. Hardened steel pins. Will fit sizes up to 8 diameter. Overall length: 8-1/ DPOCHR $32.53 Perko Retaining Cable for Deck Plates Stainless steel cable and fittings with 1-3/8 stainless steel ring and self-tapping screw /DP $7.40 Whitecap Universal Deck Plate Key Stainless steel. Fits almost all caps. Also features bottle opener built-in. Parts for Perko Model 528 Deck Plates for Pipe Replacement Caps Order No Mfg No Pipe Size List C07-99A 1-1/4 $ DP8-99A 1-1/2 $98.50 Replacement O Rings 2 per pack. Order No Mfg No Pipe Size List /4 $ DP8 1-1/2 $ $10.23 Whitecap Chain & Rope Deck Pipe Chrome plated brass. Large oval opening allows rope splice on thimble to pass through easily. Allows chain to pass through also. Interior hook to support chain. Chrome plated brass construction. Flange dimensions are 5-1/2 x 4 ; inside dimensions are 3-3/4 x 2-1/ S-114P $73.25 Spare Cover & Chain S-114T $ S-7041P $9.55 Whitecap Deck Plate Key Marine stainless steel. Opens deck fills. Order No Mfg No Only C $8.88 Perko Gas Cap for 1270 Deck Plate Black plastic cap with O-ring and integral retainer /DPG/99A $ Prices and specifications subject to change without notice.

36 Perko Chromalex Deck Fill Chrome plated zinc with black plastic flange and cap. Complete with grounding screw and integral cap retainer/gasket. Fits fill hose size: 1-1/2. O.D. overall: 3-1/8. Neck length: 1-7/ DP0CHR $24.98 Spare Caps Order No Mfg No Type List DP0BLK Standard $11.43 Perko 1319 Straight Vented Deck Fill Black polymer. Integral tank vent with flame arrestor. No deck plate key or ground wire required. Flip top cap. Order No Mfg No Marked List DPGBLK GAS $29.78 Perko Locking 1-1/2 Fuel Fill Insert Black polymer with zinc alloy lock cylinder. Dual purpose key opens fill cap & locking insert Fits most Perko vented fills DP0BLK $40.23 Perko Fuel System Locking Cap for 1-1/2 Non- Vented Fills Black Polymer with gasket. Built in lock cylinder. Size #0 fits Perko fills 1313 & 1399 Size #1 fits Perko fills 0520, 0527, 0528, 0557, 0599 and DP1BLK $38.85 Whitecap Flush Deck Fills Solid stainless steel construction for flush mounting to deck. Predrilled for #10 hardware. For use with 1-1/2 NPT. Flange outside diameter: 3-1/2 Order No Mfg No Type List Gas $ Diesel $ Water $ Waste $83.15 For use with 2 NPT. Flange outside diameter: 4-1/8 Order No Mfg No Type List Gas $ Diesel $88.20 Replacement Cap with Chain Order No Mfg No NPT List C 1-1/2 $ $38.85 Whitecap Hose Deck Fill with Key 316 Stainless steel. Barbed for 1-1/2 fuel fill hose. Flange O.D. 3. Requires #10 screws for installation $37.78 Fuel & Water Deck Pipes Perko 0540 Angled Vented Deck Fill Chrome plated bronze cap. Black Polymer body. Stainless steel bead chain. Integral tank vent with flame arrestor and anti-surge valve. Deck plate key included. Angled neck. Order No Mfg No Marked List DPGCHR GAS $58.93 Forespar Marelon Deck Fills Clearly marked for either water, fuel or waste. Easy-open cap is fitted with nylon retainer cord and rubber O -ring to ensure a safe and efficient seal. Suitable for 1-1/2. Hose barb length; 3. Deck flange is 4 diameter. Cutout: 2-1/2. Order No Mfg No Marked List Fuel $ Water $ Waste $23.95 Prices and specifications subject to change without notice. Whitecap Push-Up Deck Fills 316 Stainless steel. Barbed for 1-1/2 I.D. fuel/gas fill hose. 90 angle. Cap has chain to prevent loss. Flange O.D. 3. Requires #10 screws for installation. Order No Mfg No Type List C Gas $ C Diesel $ C Water $ C Waste $61.68 Replacement Cap C $

37 Sea Dog Stainless Steel Handrails Formed 304 Stainless 1 tubing. Order No Mfg No Length List $ $ $50.91 Whitecap Safety Grab Handle This attractively styled grab handle may be used as an economical safety device throughout passenger areas. Molded of high impact plastic, this rugged handle has a soft leather grained vinyl covering for a comfortable, no slip grip which won t corrode or discolor in harsh marine environments. Handle measures 9-1/4 long with a 6-3/4 bridge length and a 1-5/8 finger clearance. Order No Mfg No Color List S-7095P Black $ S-7096P White $10.80 Rail Fittings Grab Rails Teak Handrails Sea Dog Stainless Steel Grab Rails Formed 304 Stainless 3/4 O.D. tubing. 5/16 Stud on each end for mounting. Protrudes 2 from bulkhead. Order No Mfg No Length List $ $ $38.53 Teak Handrails Helps your passengers, guests and crew avoid slips and falls. 1-1/16 wide by 2-3/8 high. Loops are 10 long. Order No Mfg No Length Loops List $ $19.40 Whitecap Hand Rail Fittings Forward Handrail Stancheons 120 Angle Predrilled and countersunk for flat head fasteners. Forward Aft Each fitting requires two #10 screws. Height above deck is 1-1/2 for 7/8 rails, and 1-3/4 for 1 rails. Order No Mfg No Size Type Material List S-1488C 7/8 Aft C/P Zamak $ C 7/8 Forward 316 SS $ C 7/8 Aft 316 SS $ C 1 Forward 316 SS $ C 1 Aft 316 SS $23.88 Top Mount Center Fittings Predrilled and counter sunk for flat head fasteners. Requires two #10 screws. Height above deck is 1-1/2 for 7/8 rails, and 1-3/4 for 1 rails. Order No Mfg No Tube O.D. Material List S-1489C 7/8 C/P Zamak $ C 7/8 Stainless Steel $ C 1 Stainless Steel $23.88 Whitecap Hand Rail Ends Cast 316 stainless steel 90 angle ends. Includes 1/4-28 set screws. 1-1/2 above deck height. For 7/8 rails. Order No Mfg No Mounts List Top $ Bottom $45.85 Whitecap Rail End (End In) For 7/8 rails. Predrilled and countersunk for flat head fasteners. Requires two #10 screws. Includes one 1/4-28 set screw. Order No Mfg No Material Angle List S-1495C Chrome Plated Zamak 5-1/2 $ C Stainless Steel 5-1/2 $ C Stainless Steel 16-1/2 $ Prices and specifications subject to change without notice.

38 Whitecap Rail Tee Fittings Includes 1/4-28 set screws. Order No Mfg No Tube O.D. Angle Material List S /8 90 C/P Zamak $ S-1441C 7/8 60 Left C/P Zamak $ S /8 60 Right C/P Zamak $ C 7/8 90 Stainless Steel $ C 7/8 60 Left Stainless Steel $ C 7/8 60 Right Stainless Steel $ C 1 90 Stainless Steel $ C 1 60 Left Stainless Steel $ C 1 60 Right Stainless Steel $24.28 Whitecap 3-Way Corner Fitting Stainless steel C 7/8 $ C 1 $33.48 Whitecap Round Base Rail Fittings Predrilled and counter sunk for flat head fasteners. Three fasteners are required per fitting. 7/8 sizes accept #10 screws, and 1 sizes accept 1/4 screws. Includes 1/4-28 set screws. Order No Mfg No Tube O.D. Material Angle List S-1467C 7/8 C/P Zamak 60 $ S-1468C 7/8 C/P Zamak 90 $ C 7/8 Stainless Steel 30 $ C 7/8 Stainless Steel 45 $ C 7/8 Stainless Steel 60 $ C 7/8 Stainless Steel 90 $ C 1 Stainless Steel 60 $ C 1 Stainless Steel 90 $21.13 Rail Fittings 6086 Whitecap Bow Form Includes 1/4-28 set screws. Fits 7/8 rails. 110 front angle. Order No Mfg No Angle Material List S-1450C 110 C/P Zamak $ Stainless Steel $42.48 Whitecap Rail Elbows Includes 1/4-28 set screws. S-1450C Order No Mfg No Tube O.D. Material List S-1491C 7/8 C/P Zamak $ C 7/8 Stainless Steel $ C 1 Stainless Steel $24.38 Whitecap Rectangular Base Rail Fittings Predrilled and counter sunk for flat head fasteners. Four fasteners are required per fitting (except 30 fittings which require three). 7/8 sizes accept #10 screws, and 1 sizes accept 1/4 screws. Includes 1/4-28 set screws. Chrome Plated Zamak Order No Mfg No Angle Tube Size List S-1465C 60 7/8 $ S-1466C 90 7/8 $9.63 Stainless Steel Order No Mfg No Angle Tube Size List C 30 7/8 $ C 45 7/8 $ C 60 7/8 $ C 90 7/8 $ C 60 1 $ C 90 1 $21.13 Whitecap Bullet End Cast stainless steel construction. Designed to insert into a 7/8 hand rail to protect the end of the tubing C $19.08 Whitecap H.D. Rectangular Base Rail Fittings Order No Mfg No Material Prices and specifications subject to change without notice. Tube O.D. Angle Base Screw Size SS /2 x 3 1/4 (4) $61.05 List 199

39 Rail Fitting Parts Starboard Lumber Deck Tiles Accoustic Foam Sea Dog Rail Fitting Replacement Parts 304 stainless steel parts for rail fittings 2 pieces per pack. Order No Mfg No Description List OP /4-20 x 5/8 Pan Head Screw (only 3/6 has threads) 200 Prices and specifications subject to change without notice. $ OP /16 x 1-1/2 Release Pin $ OP /16 x 1 Flat Head Screw $ OP /16 x 3/4 Flat Head Screw $ OP x 3/4 Round Head Screw $ OP x 1 Round Head Screw $ OP /4-20 x 1 Round Head Screw Extra Wide Head Knurled for Thumb Tightening $ OP /4-20 x 1 Round Head Screw $ OP /4-20 x 3/4 Oval Head Screw $2.64 D.I.Y. Marine Starboard Lumber U.V. stabilized marine grade polymer, which makes an excellent choice for applications where there is exposure to sun and saltwater. Will not rot, delaminate, swell or splinter. Matte texture requires no painting, finishing or maintenance. Lasts for the lifetime of your boat. Projects using Starboard Lumber range from replacing damaged wood to adding accessories. Marine-Tex Poly-Dura is available in the adhesives section of this catalog and is recommended for use with products such as Starboard. Order No Mfg No Color Dimensions List P BLK54-1 Black 24 X 54 X 1/4 $ P BLK27-1 Black 12 x 27 x 1/2 $ P BLK27-1 Black 24 x 27 x 1/2 $ P BLK54-1 Black 24 X 54 X 1/2 $ P BLK27-1 Black 12 X 27 X 3/4 $ P WHA541 White 24 x 54 x 1/4 $ P WHA27-1 White 12 x 27 x 1/2 $ P WHA27-1 White 24 x 27 x 1/2 $ P WHA54-1 White 24 x 54 x 1/2 $ P WHA27-1 White 12 X 27 X 3/4 $ P WHA27-1 White 24 X 27 X 3/4 $ P SFM27-1 Sea Foam (Off White) 12 X 27 X 1/2 $47.63 Dri-Dek Plastic Deck Tiles Dri-Dek tiles snap together to create a ventilated surface designed to keep stowed gear dry and free from mold, mildew and musty odors. Ideal for lining the bottoms of compartments, cabinets or lockers. Put beneath anchors, gas tanks or loose equipment to protect wood and fiberglass surfaces. Also relieves the back and foot pain caused by standing at the wheel for long periods of time. Tiles are 12 x per box. Sold by each. Order No Mfg No Size Color List X12WHT 12 x 12 White $ X12BLK 12 x 12 Black $ X12BLU 12 x 12 Blue $6.95 Soundown Accoustic Foam Polyether formulation that will outlast inferior polyester foams available on the market today. This polyether foam provides the highest level of hydrolytic stability in the harsh marine environment, as the dampness found in the marine environment will promote polyester foam disintegration drastically reducing the life of the foam. Acoustic insulation materials work by two processes: Absorption of sound energy, which dissipates sound as heat energy, and reflection, which reflects noise away from a location where quieting is desired.the effectiveness of absorptive material increases directly with thickness, in both the amount of energy absorbed and the range of frequencies over which absorption occurs. Bass frequencies require thicker absorptive layers. For engine noise 1/2 is generally a minimum useful thickness while 1 is good and 1-1/2 to 2 approaches the optimum with the practical considerations of effectiveness and space available. 1 lb. per sq. ft. barrier. Sheets are 32 by 54. (12 sq. ft.) Order No Mfg No Thickness Type List IAF05MN32 1/2 No Vinyl Core $ IAF10MN32 1 No Vinyl Core $ IVF1005MN32 1/2 Vinyl Core $ IVF1010MN32 1 Vinyl Core $ IVF1520MN32 2 Vinyl Core $ Aluminum Push Pins for Insulation With washer and cap. Sold by each HPA25K $3.75 Mylar Scrim Tape for Accoustic Foam Silver. 2 x 125 roll HTA20SC $65.16

40 TH Marine Inline Scupper Fits 1-1/2 hose. Prevents backwash. Chemical resistant materials. Thermo-plastic flapper. Order No Mfg No Hose Size List ILS-750-DP 3/4 $ ILS-1200-DP 1-1/8 $ ILS-1500-DP 1-1/2 $22.59 TH Marine Scupper Flapper Repair Kit Repairs most scuppers. Kit contains: 2 each 1-5/8-1-7/8 & 2-1/4 flappers, keepers and stainless fasteners FSRK-1-DP $16.65 TH Marine Flush Mount Scupper Adapters Mounts over 1 to 1-1/4 drain tubes. Grooved inside to fit over drain flange SA-2B-DP $11.01 TH Marine Large Rectangular Scupper Quickly drains decks. For decks above waterline. Maximum drainage for larger boats. Easily clears debris. Fits 2 x 5-1/2 hole LRS-2-DP $14.82 Marine East One-Piece Rubber Scupper Fits standard 2.7 scupper openings. Installs easily in minutes. Tapered flap minimizes backwash. Will not corrode like brass. Installs with #8 flat head screws (not included). Order No Mfg No Color List Black $ White $6.54 Sea Dog Scupper Valve Injection molded nylon. 2-13/16 O.D.; 1-7/8 I.D. requires 4 #6 flat head screws for installation $5.55 TH Marine Flow-Max Ball Scupper Replaces worn out flapper scuppers 70% more drainage than competitive models Twist off for easy cleaning Retrofits all hole patterns Seal is slotted to fit over 1-1/4 motorwell tubes. Meets all ABYC standards FMS-1-0-DP $13.58 Perko Plastic Cockpit Scupper Molded white polymer. Flush mount for use with hose. For use when discharge is above the waterline. Insert prevents passage of large objects without restricting water flow. Hose size: 1-1/2. Maximum hull thickness: 1-3/4. Flange O.D.: 2-3/4 ; I.D.: 1-1/ /DP $21.00 Perko Scupper Valve Assembly For surface mount applications. Molded white polymer with soft black rubber flapper. Thru-hull and mounting hardware not included. O.D. Flange: 2-7/8. Screw size: #6 Scuppers & Floor Drains TH Marine Duckbill Scupper Tough thermoplastic flapper. Seals tight under water pressure. Easy to install over drain tubes DBS-2B $14.22 Attwood Stainless Steel Floor Drain Stainless steel. 3-1/4 diameter. Suitable for floor drains, vents or hidden horn openings. Four holes for #6 screws (not included) $6.93 Marine East Maxxflow Drains Provides maximum sink, shower or deck drainage. Flush head allows complete drainage. Equipped with screen to protect drain. Complete assembly includes nut. White. Fits marine sanitations hose. Order No Mfg No Type Size Overall Length Angle W Long threads w/screen 1 in. Hose x 1-1/2 Pipe 5-3/8 Straight $ W Long threads w/screen 1-1/8 in. Hose x 1-1/4 Pipe 5-3/8 Straight $ W Short threads w/screen 1-1/8 in. Hose x 1-1/4 Pipe 4-3/8 Straight $ W Long threads w/screen 1-1/2 in. Hose x 1-1/2 Pipe 4-3/8 Straight $ W W/screen 1-1/8 in. Hose x 1-1/2 Pipe 4-1/2 90 $26.85 List Prices and specifications subject to change without notice DP $17.23 Beckson Drain Vent Small vent for deck or bulkhead mount. Raised fins reduce clogging when used as a scupper. Perfect for venting areas under fixed seating too. Color: Black Hole Cut = 2-1/4 (5.7 cm) Dia. Over All = 4 (10.1 cm) x 2.5 (6.4 cm) SV-1B $5.80 Forespar Flush Head Drain High strength glass-reinforced Marelon $

41 Nickel Plated Eye Straps S $4.50 Whitecap Stainless Steel D-Ring S-243C 1-1/8 Opening $5.38 Perko Rope Guides Chrome plated zinc. Hole I.D.: 5/16 Base dimensions: 1-1/4 x 3/4 Screw size: # DPOCHR $9.15 Whitecap Strap Adjuster Buckle 1 single bar to adjust wide strap. For use with 1 webbing S-242C $3.80 Whitecap Stainless Steel Eye Strap Rope Guides Bimini Top Straps Bimini Top Tie Downs Order No Mfg No I.D. Length List S-295C 3/8 1-5/8 $ S-296C 1/2 2 $ S-297C 3/4 3 $5.28 A B Indian Mills Make-A-Strap 1 wide nylon webbing in rolls for making your own bimini top straps. Webbing sold in 100 ft. rolls. Buckles and slides sold seperately. Order No Mfg No Item List F05616 (A) Black Lever Lock Buckle $ F05617 (B) Black Snap Lock Buckle $ F05618BLACK (C) Black Slide $ F06330 (D) Black Buckle $1.20 C D Attwood Convertible/Bimini Top Replacement Strap Poly web straps, white with rust resistant chrome/brass spring snap hooks and nonmar bow adjusting buckles. Sold in pairs, 62 long $19.70 Adjustable Tie-Down Strap 6 long, fitted with ring at one end and snap on the other. Sold in pairs. Order No Mfg No Color List Black $ White $41.22 Webbing Sold by the foot. Order No Mfg No Color Width x Roll Length List F05627 Black 1 x 100 $ F05628 Blue 1 x 100 $ F05630 White 1 x 100 $ WEBW18 White 1 x 300 $ WEBW2 White 2 x 300 $0.84 Eye Straps Zamak sold in pairs. 1-1/2 long, 5/16 eye. Plastic sold in four pack. 1-7/8 long, 1/2 eye. 202 Prices and specifications subject to change without notice. Order No Mfg No Color List Zamak $ Black $ White $3.96

42 Dog Snaps 1 snap, stainless steel. 2 per pack $7.05 Internal Eye End Sold in pairs. Order No Mfg No Size Color List /4 C/P Zamak $ /4 White $ /8 C/P Zamak $ /8 Black $ /8 White $3.54 Baby Snaps Cadmium plated malleable iron. 3/4 eye, 2 overall. External Eye End Sold in pairs $10.71 Order No Mfg No Size Color List /4 C/P Zamak $ /4 Black $ /4 White $ /8 C/P Zamak $ /8 Black $ /8 White $6.24 Top Mount Deck Hinge Order No Mfg No Color List C/P Zamak $ Black $ White $7.05 Side Mount Deck Hinge Sold in pairs. Mounts vertically on side walls. Order No Mfg No Color List C/P Zamak $ Black $ White $4.44 Bimini Top Jaw Slide Sold in pairs. Order No Mfg No Size Color List /4 C/P Zamack $ /4 Black $ /4 White $ /8 C/P Zamack $ /8 Black $ /8 White $ RC 7/8 Stainless Steel $22.98 Prices and specifications subject to change without notice. Pull Pins Stainless steel. Replaces the screws in stainless steel and zamak deck hinges. Allows fast and easy mounting or removal or a bimini top. Comes complete with safety lanyard to prevent lost pins. Sold in pairs $24.96 Adjustable Bimini Support Pole Use these poles to replace your rear straps and keep your top up and out of the way. Adjusts from 28 to 48. Two 7/8 jaw slides are included. Anodized aluminum $

43 Whitecap Bimini Top Windshield Top-Lok Stainless steel. Stud portion affixed. Four per pack. Fits 3/4 windshield trim $11.76 Cap Cast stainless steel. Accpets 1/4 pin. Includes 1/4-28 set screw. Order No Mfg No Size Type List C 7/8 Standard $ C 1 Standard $ C 1 Heavy Duty $24.23 Angle Base Deck Hinge 316 Stainless steel. Base size: 7/8 x 2.Bolt size: 1/4-20. Fasteners: #10 (2) C $12.55 Bimini Top Slide Assembly Fold your bimini top behind the rear seat. Easy installation. Fits most deck hinges. Non-locking. sold in pairs $ Slide Assembly Replacement Parts Sold in pairs. Order No Mfg No Item List Nylon Slides $ Zamak End Caps $12.15 Attwood Convertible/Bimini Top Slider Kit For custom adjustment of bimini top, while in use or in storage. Kit contains two high impact white nylon jaw slides with stainless steel nuts and bolts, two 36 aluminum slider tracks, and two end caps. Easy to drill and mount $38.60 Heavy Duty Deck Hinge & Top Cap Assembly Cast stainless steel. fits 1 tubing. Base size: 1 x 2.1. Bolt size: 5/ Requires two 1/4 fasteners (not included) $55.73 Slide Cast stainless steel. Includes 1/4-20 pin and 1/4-28 set screw. Order No Mfg No Size Type List C 7/8 Standard $ C 1 Standard $ C 1 Heavy Duty $31.50 Stainless Steel Concave Base Deck Hinges Predrilled and counter sunk for two #10 screws. Can be mounted on any curved surface or rail. Equipped with either a 1/4 spring loaded removable pin, or a 1/4-20 threaded pin. Order No Mfg No Type List C w/removable Pin $ C w/threaded Pin $ C 6108C 6104C 6213C Stainless Steel Flat Base Deck Hinges Predrilled and counter sunk for two #10 screws. Can be mounted on any flat surface or rail. Equipped with either a 1/4 spring loaded removable pin, or a 1/4-20 threaded pin. Order No Mfg No Type List C Removable Pin $ C Threaded Pin $ C Heavy Duty $ C With Plate $22.60 Side Mount Deck HInge Cast stainless steel. Predrilled and counter sunk for two #10 screws. Bolt is 1/4-20 threaded C $11.43 Top Slide with Bolt 316 S.S. Top Slide with Bolt Tube Size - 1 Bolt size - 1/4-20 Weight oz. With 1/4-28 set screws RC $31.35 Whitecap Stainless Steel Quick Release Pins Order No S-1019C S-1020C S-1021C S-1025C 1/4 x 1-5/8 1/4 x 1 1/4 x 1 5/16 x 2-7/16 w/flip tab Mfg No Size Features w/lanyard w/lanyard w/lanyard Southco Stainless Steel Lanyard Assemblies 300 series stainless steel. Vinyl coated. Tab is aluminum. List $15.70 $14.38 $24.88 $14.10 Order No Mfg No Length List LW $ LW $ Prices and specifications subject to change without notice.

44 Teak Finger Pulls Recessed mount. Order No Mfg No O.D. Depth List N.H.S. Marine Sunblocker Self-insulated protective clip which eliminates contact between metal tubular top frame and clear plastic windows (and prevents damage). 2 per pack $ /8 $7.25 Starbrite White Teflon Snap & Zipper Lubricant Use on boat snaps, metal and plastic zippers to protect against corrosion, reduce wear and friction, prevent binding and repel salt spray deposits. Non-toxic, nonstaining. Will not wash off. 2 oz. tube $11.55 Shurhold Snap-Stick Snap and Zipper Lubricant May be applied directly to the head of a snap, along a zipper or even on the barrel of a hinge without causing a mess. One application can last up to three months. Non-toxic, biodegradable and harmless to fabrics, plastics and metals..45 oz. tube $6.55 Wood Dowels /4 x 48 $ /8 x 48 $ /2 x 48 $1.44 Drawer Pulls Recessed mount. 2 per package. Order No Mfg No Diameter Depth List /8 3/8 $3.05 Teak Edge Molding 5 ft. lengths. Dimensions: 1-3/8 x 13/16 outside, 7/8 x 5/16 track $43.30 Teak Quarter Round Molding 5 ft. lengths. Order No Mfg No A B List /8 3/8 $ /2 1/2 $10.13 Teak Stop Molding 5 ft. lengths. Order No Mfg No A B List /8 3/8 $ /8 3/4 $14.78 Teak L-Molding 5 ft. lengths. Order No Mfg No A B C List /8 7/8 5/8 $ /16 1-3/16 13/16 $38.50 Teak Bulkhead Molding 5 ft. lengths. Prices and specifications subject to change without notice A 1-1/4 5/8 $ A 1-1/4 1 $4.05 Teak Battens 3/8 high. 5 ft. lengths. Order No Mfg No A B List /8 7/8 $ /8 1-3/16 $ /8 1-7/16 $ /8 1-7/8 $ /8 3 $43.30 Teak Plugs In packages of /4 $ /8 $ /2 $ /8 $6.08 Teak Outside Edge Corner Molding 2 inside radius. 2-1/2 outside radius $19.55 Order No Mfg No A B C D List /8 1/2 5/8 1/4 $ /16 3/4 5/8 1/4 $ Teak Moldings & Trims Teak Plugs Zipper Lubricant Marine Sunblocker

45 Aluminun & Stainless Steel Moldings and Stock Rub Rail Anodized Aluminum Flat Stock 1/8 thick /8 x 3/4 x 6 $ /8 x 1 x 6 $ /8 x 1-1/2 x 6 $24.36 Anodized Aluminum Angle /16 x 1/2 x 72 $ /16 x 3/4 x 72 $ /16 x 1 x 72 $ /8 x 3/4 x 72 $ /8 x 1 x 72 $27.66 Aluminum Tubing Ideal for hand rail repairs. Wall thickness is Anodized 3/4 x 72 $ A BLY6-1 Drawn 7/8 x 72 $ A BLY12-1 Drawn 7/8 x 144 $62.45 Stainless Steel Flat Stock 1/8 thickness. 3 lengths /8 x 3/4 x 36 $ /8 x 1 x 36 $36.76 Stainless Steel Angle Stock /8 x 1 x 1 x 36 $73.05 Marine Industries Stainless Steel Mouldings All RSE Stainless Steel items are highly polished. Rub Strakes - Mfg. no RBSTRK Stainless steel. Formed on two ends. Order No Mfg No Dimensions List /4 x 8 $ /4 x 12 $ /4 x 18 $ /4 x 24 $ x 12 $ x 18 $ x 24 $ /4 x 12 $ /4 x 18 $ /4 x 24 $23.00 Marine Industries Rail Ends Stainless steel. Formed on one end /4 x 12 $ x 12 $10.40 Marine Industries Solid Half Oval Rub Rail Stainless steel. 3/4 rub rail is predrilled for #10 fasteners at 6 centers, 1 rub rail is predrilled for #12 fasteners at 6 centers. SOLD BY THE FOOT. Order No Mfg. no. Size Length List /4 12 $ $ Taco Stainless Steel Rail Tubing Highly polishted. Type /64 wall thickness. Order No Mfg No Size Length List S P12-1 7/8 12 $ S P $ S P $ Marine Industries Rolled Half Oval Rub Rail Stainless steel. Predrilled for #8 fasteners at 6 centers. In 12 lengths. SOLD BY THE FOOT. Order No Mfg. no. Size Length List /4 12 $ $ /4 12 $ Prices and specifications subject to change without notice.

46 StanPro Quickedge Trim Versatile, durable vinyl, metal core trims. Black or white color, textured finish. Fits 3/16-1/4 edges. Grips edges from.135 to.250 thick. 250 per box. SOLD BY THE FOOT. Frost King Tubular Pipe Insulation Pre-slip polyethylene foam saves energy, stops wasted heat loss. Prevents pipes from sweating. Protects pipes from freezing. Fits 1/2 copper plex and CPVC or 1/4 iron and schedule 40 PVC. 1/2 x 6. 5/8 wall thickness. Order No Mfg No Color List Black $ White $ P10B/6 $3.99 StanPro Standard Double Lip Trim Black or white color. Textured finish. For 1/32 to 1/8 edges. Grips edges from.032 to.125 thick. 100 ft. box. SOLD BY THE FOOT. Order No Mfg No Color List Black $ White $1.60 TACO Flexible Vinyl Rub Rail Kits Rugged and durable. Popular on bass boats, runabouts, open fisherman boats. Kits include 50 each of black vinyl rub rail and insert with end caps and screws in a pie box. Also includes instruction sheet. Black color with black insert. Choose insert color below. Length: V BBK50-2 $ Over 350 brand name manufacturers. Enormous, strategically located warehouse to support all of our customers. We can stock more inventory and buy in larger quantities which helps us keep our prices low. Selection second to none. 120 years combined marine experience within our sales team - we can find what you need! Exclusive Wesmar distributor. Hours: 8:00 a.m. - 4:30 p.m. - Monday - Friday. Knowledgeable & friendly staff ready to help you. Call Debbie Senti ext. 313 Call Jim Haun ext. 304 Call Lou Moran ext. 314 Quickedge Trim Double Lip Trim Rub Rail Kits Tubular Pipe Insulation Prices and specifications subject to change without notice. 207

47 Drain Tubes & Plugs TH Marine Drain Plugs Screw in plug - stays with the boat. Tough nylon material with O ring seal. Flange: 1-1/2 x 2. Fits 1 hole DP-1-DP $8.97 Beckson Screw Type Drain Plug Self-cleaning thread design, O-ring, and super strength center retaining legs to secure the center while draining. Ideal installation for transom of personal watercraft, small boats, fish wells, coolers, ice chests, water tanks, etc. Should be mounted in a 1 I.D. hole with two stainless steel fasteners and positioned with gap in thread at lowest point. Black with gasket. Hole cut: 1 Dimensions overall: 1-1/4 x DP10-B $4.55 Attwood Personal Watercraft Drain Plug and Receiver Kit Molded black ABS plastic with threaded receiver. Molded retaining strap. Includes rubber plug washer and attaching screws $6.28 Forespar Marelon Drain Plug Fitted with neoprene seal, will not deteriorate and crack with age $12.45 TH Marine Push-In Plug for Drains This push plug is used to stop water flow through drains from baitwell or livewell. Plug works great with T-H Marine overflow drain tubes. This black injection-molded push plug features a large ring for easy removal. It also has a double ring seal PP-118-DP 1-1/8 $ PP-150-DP 1-1/2 $13.62 Attwood Brass Garboard Drain Plug Provides bilge drainage when hauling out. Nut removes with wrench or pliers. Machined, tapered pipe threads ensure watertight plug fit. 3/8 neck depth. Three countersunk holes for #8 screws $14.75 TH Marine Chrome Plated Garboard Drain Plug Chrome plated brass. Salt water & UV resistant. 9/16 plug. Fits 1 hole GDP-1CB-DP $14.38 Sea Dog Bronze Garboard Drain Plug with T-Handle Plug Die cast bronze. Order No Mfg No Thread Size A B C D E Screw Size /4 NPT 2-5/16 13/16 1-1/8 3-1/2 1 #8 FH $ Prices and specifications subject to change without notice. List Moeller Transom Drain Plug Made of tough celcon to fit Moeller s transom drain tube or to replace the brass garboard plug. The plug has a screwdriver slot and rubber O ring to seal water tight $8.76

48 Seachoice Drain Plugs Stainless steel contstruction for durability. Mount from inside transom. Twist-turn Plugs: Fully adjustable, will not leak or jar loose. Snap-lock Plugs: Cam-action provides easy installation. Will not jar loose. Order No Mfg No Type List Twist-Lock $ Snap-Lock $5.67 Moeller Brass Drain Tubes 1 O.D. type with flared end. Order No Mfg No Length List D 1-7/8 $ D 2-1/2 $ D 3 $6.90 Moeller Deck and Baitwell Plugs The neoprene body, stainless steel plates and adjustable brass cam snaps to provide a leak proof non-slip seal /8 $ /16 $ /2 $ /16 $ /8 $ /16 $ /4 $ /8 $5.01 TH Marine Splash Well Drains Chrome plated; molded high strength material. Push together for secure fit. Flexible to prevent breakage. Hole size: 1-1/4. Order No Mfg No Max. Thickness List SWD-3WCP-DP 2-3/4 to 4-1/2 $ SWD-4WCP-DP 1/2 to 3 $8.85 Drain Plugs and Tubes TH Marine Push-In Drains Low profile head for complete drainage. Easily pushed into place. Order No Mfg No Color List PD-2-DP White $4.00 Snap Tite Moeller Drain Plugs Brass construction. Fits 1 tubing. Turn-Tite Order No Mfg No Type List Snap Tite $ Turn Tite $6.21 Det Mar Motorwell Drain Tube Serrated snap fit installation. High-strength polypropylene construction. Maximum wall thickness: 2-1/4 Installation hole diameter: $3.81 Prices and specifications subject to change without notice. 209

49 Flax & Teflon Packing Locking Wire Packing Extractor Tool Rivets Flax Packing The standard replacement product for stuffing boxes worldwide. Braided from quality rovings and then impregnated with a generous amount of lubrication material. Temperature limit: 200 F. PSI limit: 150 psi FPM limit: Lengths Order No Mfg No Size Length List /8 24 $ /16 24 $ /4 24 $ /16 24 $ /8 24 $ /16 24 $ /2 24 $ lb. Packages Order No Mfg No Size Length List /4 30 $ /16 12 $ /8 9 $ /2 8 $ /8 3 $12.75 Teflon Flax Packing Flax packing braided from strong rovings and then impregnated with Teflon. This combination offers higher performance and longer packing life. Temperature limit: 220 F. PSI limit: 160 psi FPM limit: length. Order No Mfg No Size Length List /8 24 $ /16 24 $ /4 24 $ /16 24 $ /8 24 $ /16 24 $ /2 24 $16.50 Packing Extractor Tools Flexible shaft with replacement tips Small $ Medium $ Large $14.25 Arrow Aluminum Rivets 210 Prices and specifications subject to change without notice. Graphtec Packing Unique blend of W.L. GORE fibers and graphite fibers that are impregnated with PTFE. This combination of fibers produces a packing that is thermal conductive, strong and very durable. The thermal conductive feature dissipates heat away from the stuffing box allowing it to run cooler and more efficient. Order No Mfg No Size Length List /16 24 $ /4 24 $ $ /8 24 $ /2 24 $63.90 Order No Mfg No Diameter Grip Pack List RSA18 1/8 1/8 25 $ RMA18 1/8 1/4 20 $ RSA316 3/16 1/8 15 $ RMA316 3/16 1/4 15 $ RLA316 3/16 1/2 12 $1.99 Stainless Steel Rivets Order No Mfg No Size Grip Pack List /8 3/16 10 $ /8 3/4 10 $ /8 3/8 8 $ /32 1/4 5 $ /32 3/8 4 $ /16 1/4 4 $ /16 3/8 3 $ /16 1/2 3 $4.50

50 Stainless Steel Locking Wire wire.032 $ wire.041 $3.30 Stainless Steel Togglers Used as mounting aids when fastening hardware to surfaces on which the other side is inaccesible. 2 per pack /4-20 $9.93 Handi-Man Packaged Clevis Pins Order No Mfg No Size Pack List /16 x 3/4 2 $ /16 x 7/8 2 $ /16 x 1-1/8 2 $ /4 x 3/4 2 $ /4 x 7/8 2 $ /4 x 1 2 $ /4 x 1-1/4 2 $ /16 x 3/4 1 $ /16 x 1 1 $ /16 x 1-1/4 1 $ /16 x 1-1/2 1 $ /16 x 2 1 $ /8 x 1 1 $ /8 x 1-1/2 1 $ /8 x 2 1 $ /2 x 1-1/2 1 $ /2 x 2 1 $8.16 Standard Beckson Specialty Fasteners Standard Barrel Nut Provides security of a thru-bolt installation while featuring: Clean/modern look Easier port installation Hides fasteners Eliminates installation leaks Standard Order No Flush Mount Barrel Nut Mfg No Lgth. Diameter Thread Length Flush Order No Mfg No Length Diameter Finish Pack List BB187-31F25 3/8 3.8 Finish Pack List BB187-01/ Chrome 25 $ BB250-01/ /4-20 Chrome 25 $28.15 Plated Brass 25 $39.70 Alligator Anchors 4 per pack. Prices and specifications subject to change without notice /16 $ /4 $4.83 S & J Products Well Nuts 3 per pack /4-20 x 1 $5.76 Lord & Hodge Handi Grommet Kits Everything necessary to install grommets in banners, flags, tents, sails, boat covers, etc. Kit includes: Cutter, Inserting handle, Base and Grommets and Washers (quantity depends on size). Order No Mfg No Type I.D. Grommets per pkg A-0 Brass 1/4 24 $ A-2 Brass 3/8 24 $ A-4 Brass 1/2 12 $ A-0 Nickel Plated Brass 1/4 24 $ A-2 Nickel Plated Brass 3/8 24 $ A-4 Nickel Plated Brass 1/2 12 $18.69 Grommet Refill Kits - Brass Order No Mfg No Size Pack List /4 24 $ /8 24 $ /2 12 $6.21 Grommet Refill Kits - Nickel Plated Brass Order No Mfg No Size Pack List /4 24 $ /8 24 $ /2 12 $6.21 List 211 Barrel Bolts Grommet Kits Well Nuts Alligator Anchors

51 Canvas Fasteners Clinch-Fast Fastening Kits Grommet Kits S-1BLACK S-1-C/P S-2 S-7 S-6 S-3S Clinch-Fast Fasteners Order No Mfg No Item Pack List S-1BLACK 19/32 Dia. Black Cap Button 5 $ S-1-APACK 19/32: Dia. C/P Cap Button 100 $ S-2-APACK 19/32 Dia. Socket 100 $ S-7-APACK Eyelet Stud 100 $ S-6-APACK Eyelet Stem 100 $ Deluxe Clinch Fast Kit Complete kit includes 14 attachments plus a special 4 piece hole punch set along with a complete variety of over 330 assorted fasteners and one 10 Vise Grip by Petersen. All in a handy, durable shop kit. Everything needed to clinch snaps, buttons, grommets, rivets, center punch, counter sink and clamp soft, fragile, plated or painted materials. Clinch Fast Tools S-1BLACK- APACK T5-4 $99.99 Order No Mfg No Item List T3-10S Vise Grip 10 Straight Jaw $ T4-B2A 19/32 Dia. Black Cap Button 100 $ S-3S-APACK Phillips Head Stud 5/8 long 50 $24.99 Clinch-Fast Fastening Kits Handy, convenient bubble packs. Order No Mfg No Item List Button Fastening $ Eyelet Fastening $9.99 T4-B2A 4-79B T4-89A T4-80B Button Fastener Tool for use with T3-10S 212 Prices and specifications subject to change without notice. $ B Anvil for Snap Buttons $ T4-89A Eyelet Tool $ T4-80B Anvil Eyelet Tool $9.99 N. A. Taylor Dot Type Fasteners Standard snap-on and snap-off design Snaps on and off in any direction. Order No Mfg No Item List Male fastener on wood screw (6 sets) $ Male fastner on machine screw (4 sets) $7.98 Lord & Hodge Snap Fastener Kits For the repair of boat covers, tarps, etc. Kit contains: Setting Tool (1) Fastener Sets (6) Refills Order No Mfg No Item List Fabric to Fabric $ /8 Screw Stud Type $8.40 Order No Mfg No Item Pack List A Fabric to Fabric 6 sets $ A 3/8 Screw Stud 6 sets $5.58 Lord & Hodge Canvas Curtain Fasteners 3 sets per pack $ $ $10.44 Perko Curtain Fasteners Nickel plated brass. 5 pcs. per package /000/NKL $20.14 Handiman EZ Grommet Kit (Blue) Plastic hole grommets that snap together to give you an instant grommet. Ideal for canvas, plastic sheeting and heavy cloth. Repair your tarps or install new grommets. 1/2 diameter hole. 12 per box $10.68

52 Pro-Dec Tap Caps Press on covers for #2 Phillips Recesses. Selfaligning feature makes fitting simple and quick. Flexibility of crown helps prevent gaps under fitted covers. 25 per pack MK-801 Order No Mfg No Color List White $ Black $ Brown $6.76 Handiman Packaged Canvas Fasteners Order No Mfg No Item Pack List Cap & Socket Set 6 Sets $ Stud & Eyelet Set 10 Sets $ Pan Head Wood Screw Socket Set MK $ Machine Screw Canvas Stud 5 $ Wood Screw Swivel Stud 2 $ Prong Swivel Stud w/plate Each $ MK-801 Lift-A-Dot Kit 5 Sets $ Stud & Cinch Plate 3 Sets $ Socket W/Cinch Plate 3 Sets $ Dot Fastener w/wood Screw 5 Sets $ Stud Swivel 1 $ Eyelet Stud & Washer 3 Sets $ MK-802 Snap Fastener Kit 20 Sets $37.44 Master Mariner Fastener Kits Variety of stainless steel fasteners, washers, etc. Order No Mfg No Pieces List WMMK $ WMMK $ Prices and specifications subject to change without notice. Pro-Dec Products Snap-Caps Fastener covers that conceal the heads of screws, rivets, nails, dowels and bolts. Comprised of two parts, a cap and a cup washer, molded in UV stabilized co-polymer polypropylene for all weather applications. Cap dimensions: 8/8: A B /12: A B Order No Mfg No Size Color Pack List CSK 8/8 White 20 $ CSK 8/8 Teak 20 $ CSK 8/8 Off White 20 $ CSK 8/8 Black 20 $ CSK 8/8 Gray 20 $ CSK 8/8 Walnut 20 $ CSK 12/12 White 20 $ /12 Chrome 4 $ CSK 12/12 Black 20 $ CSK 12/12 Teak 20 $ CSK 12/12 Off White 20 $ CSK 12/12 Gray 20 $ CSK 12/12 Walnut 20 $4.98 Handi-Pack Stainless Steel Fastener Kits All stainless steel. Packaged in durable plastic box. Order No Mfg No Type Pieces List HP100 Oval Head Machine Screws 81 $ HP101 Pan Head Self Tapping Screws 68 $ HP102 Oval Head Self Tapping Screws 68 $ HP103 Washer Kit 186 $ HP104 Cotter Ring / Pins 82 $ HP105 Nuts & Washers 195 $ HP106 Round Head Machine Screws 54 $ MK-901 Common repair necessities 100 $ MK-900 Common repair necessities 168 $ Handi-Man Fastener Kits Tap Caps Snap Caps Fastener Kits

53 Stainless Steel Self-Tapping Screw Assortment Assorted self-taping screws, approx. 100 pieces, phillips head BASST $36.24 Stainless Steel Screw Eye Order No Mfg No Size Shank Length List #8 7/8 $ #4 1-1/8 $ #2 1-1/4 $ #0 1-1/2 $3.12 Stainless Steel Screw Hook /4 x 4-1/4 $ /8 x 4-7/8 $9.10 Fastener Kits Screw Hooks Eye bolts Screw Eyes Medium Fractional Fastener Kit A piece, 304 stainless steel fastener kit, labeled, with color code for easy fastener identification. 27 tapping screw sizes ( 6 X 1/2 thru 10 X 1 1/2 ), flat, oval, and pan head. 14 Machine screw sizes, pan & oval head ( 6-32 X 1/2 thru 1/4-20 X 2 ). Flat washers, Lock washers, Hex nuts, & Lock nuts ( /4-5/16-3/8, 1/2). Finishing cup washers ( ). Cobalt drill bits for each screw diameter. Phillips drive bits # 1, #2, & #3. The kit box is a split level case. The top right section of the kit contains fastener tubes, arranged in two levels. Net Wt.- 18 lbs A-2470 $ Handi-Man Packaged Cotter Rings Stainless Steel. Order No Mfg No Size Pack List /16 10 $ /4 6 $ /16 4 $ /8 4 $ /2 4 $4.50 Stainless Steel S Hook Order No Mfg No Overall Length List /2 $ $1.93 Stainless Steel Eye Bolts Order No Mfg No Diameter Length List /16 1-1/2 $ /16 2 $ /4 2 $ /4 2-1/2 $ /4 3 $ /4 4 $ /16 3-1/4 $ /16 4 $ /16 5 $ /8 4 $ /8 5 $ /8 6 $ /8 8 $6.65 Stainless Steel Lag Screw Eye Order No Mfg No Diameter Length List /4 3-3/4 $ /16 4 $ /8 4-1/2 $5.60 Sea Dog Stainless Steel Eye Bolt with Shoulder Machined.304 stainless steel. Order No Mfg No Eye Diameter Overll Length Shank Length Shank Dia /2 3-3/8 2-5/16 6 mm $ /8 4-5/ mm $ /8 5-3/8 3-15/16 10 mm $34.53 List 214 Prices and specifications subject to change without notice.

54 Stainless Steel Phillips Oval Head Self-Tapping Screws Order No Size Pack List x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $ x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $ x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $25.64 Stainless Steel Flat Head Self-Tapping Screws Order No Size Pack List x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $ x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $ x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $25.64 Stainless Steel Pan Head Self-Tapping Screws Order No Size Pack List x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $ x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $ x 3/4 100 $ x $ x 1-1/4 100 $ x 1-1/2 100 $25.64 Stainless Steel Hex Nuts Order No Size Pack List $ / $ / $ / $ / $17.68 Stainless Steel Lock Nuts Order No Size Pack List $ / $ / $ / $ / $32.40 Stainless Steel Flat Washers Order No Size Pack List # $ /4 100 $ / $ /8 100 $ /2 100 $11.16 Stainless Steel Lock Washes Order No Size Pack List # $ /4 100 $ / $ /8 50 $ /2 25 $11.60 Stainless Steel Fender Washers Order No Size O.D. Pack List # $ /4 1-1/4 50 $ /16 1-1/4 50 $ /8 1-1/2 25 $ / $27.04 Screws Nuts Washers Lag Shields Stainless Steel Finish Washers Lag Screw Shields Order No Size Pack List Order No Mfg No Size Length O.D. List #6 100 $ /8 short 2-1/8 5/8 $ #8 100 $ /2 short 2 3/4 $ # $ /8 long 2-3/8 5/8 $ # $ /2 long 2-3/4 3/4 $ /4 100 $16.12 Prices and specifications subject to change without notice. 215

55 Velcro Products 3M Fastening Tapes Beige Black White Velcro Sticky Back Tape Self-sticking - use on most smooth surfaces without making holes. Order No Mfg No Size Color List x 3/4 Beige $ x 3/4 Black $ x 3/4 White $ x 3/4 Beige $ x 3/4 Black $ x 3/4 White $ x 3/4 Beige $ x 3/4 Black $ x 3/4 White $29.00 Industrial Strength Sticky Back Brand Tape 4 x 2 Strips Stronger closure. Waterproof adhesive. 2 wide. Great for all types of indoor and outdoor projects which require a superior strength or waterproof fastener. Order No Mfg No Color List Black $ White $4.40 Velcro Brand All Purpose Adhesive Use to attach Velcro brand products to difficult or rough surfaces where an extra strong bond is desirable, or in areas exposed to weather year round oz. $2.49 Extreme Velcro Brand Products New technology allows new Velcro Brand Extreme fasteners to be used in all weather situations. No need for drilling, nails, screws or epoxy. Holds 1.5 lbs. for every square inch of tape. 5 sets of 1 x 4 strips per package. Color: gray $4.60 Velcro Brand Cinch Straps Wrap lines, cables and hoses, or secure gear such as harnesses and safety equipment. 1 wide x 18 long. 2 per pack. Order No Mfg No Type Color List Marine Grade Heavy Duty Blue $4.75 Black $3.75 3M Scotch Outdoor Carpet Tape for Concrete Patios and Decks A permanent, heavy duty, weather resistant tape for outdoor use. Great for concrete, patios and decks in x 40 ft $ M Double Coated Urethane Foam Tape 1/8 inch. Soft, conformable and offers excellent shear adhesion. Ideal for a wide range of general purpose mounting and joining applications. The acrylic adhesive forms long lasting bonds to many surfaces. 1 in x 4 yd $25.96 Velcro Brand Sticky Back Fasteners Self-sticking for larger jobs. Color: white. Order No Mfg No Type Pack List /8 Coins 7/8 Squares 15 $ $3.39 Ready America Super Grips Larger fasteners double the strength of TV Grips. Provides stronger protection for larger, heavier equipment. Holds safely in heavy seas and off-road conditions. 3M adhesive pads can be attached for temporary use (on trips), or used for permanent attachment. Two-corner kit recommended for 13 TV/VCR combinations. 4 per package. Order No Color List Black $ White $ Prices and specifications subject to change without notice. 3M Dual Lock Reclosable Fastening System Alternative to zippers, screws, snaps, hooks, bolts and more. Black colored acrylic with pressure-sensitive backing. Very-High-bond. Rolls size: 1 x 4.9 yds. Package includes 1 roll each of both sides. Sold in full packages only. Order No Mfg No Color List/Pack Black $ Clear $215.45