Chain. Campbell Chain Products:

Transcription

1 Chain Campbell Chain Products: 447 Built for rugged long service - Standards of treatment should be observed. Proper care extends useful life of the product. Warnings & Cautions Never field weld or repair chain. Do not exceed working load limit of chain component. Chemically active environments may adversely affect chain & components. Do not use in highly acidic or caustic environments. High & low temperatures will affect chain & components. Governmental regulations: Apply to Chains used in certain applications. Follow all Federal, State or Department of Transportation, and OSHA standards Inspection Conduct regular inspections on chain to detect deterioration or damage & for tested conditions. If present, remove from service immediately! Cracks in the chain or any component. Excessive wear, nicks or gouges. If dimension is worn more than 10% from original dimensions. Stretched, bent, twisted, or distorted chain links or components. Conditions which questions the integrity of the chain. Proper Use To protect users & damage to chain, these safe practices should be followed: Select a chain suitable for application with the environment. Hooks or other components should be a size to fit intended connections. Avoid shock loading, twisting or kinking. Never knot chain Pad all sharp edges or corners in contact with the chain. Rig so load is properly seated in the hooks or other components. Campbell Proof Coil Chain General purpose chain of standard commercial quality Low carbon steel. Galvanized and proof tested. Grade 30 Nominal Dimensions (in. & mm) Trade Mat. Inside Dimensions Working Length/ Size Dia. Length Width Load Limit Ft. per Lb/ Links/ in. - mm in. - mm in. - mm in. - mm Lb Kg drum 100' Ft. CAM / CAM / CAM / CAM / , CAM / , CAM / , CAM / ,600 4, Campbell Mooring Chain - Order in feet Low-Carbon steel chain with long link design Long-link allows use of shackle at any point in chain Greater working load than Proof Coil.. Galvanized and proof tested Stock# Ft. per Drum CAM Mooring Chain Galv 3/8"...400' CAM Mooring Chain Galv 1/2"...200' CAM Mooring Chain Galv 5/8"...150' System 4 High Test Chain Load binding, towing, logging. Carbon steel. Higher strength, galvanized. Size Drum FT. Work Load Links CAM Chain High Test 3/8 x Lb

2 448 Hooks / Connectoring Links / Sling Links Connecting Links / Missing Link Drop forged. Integrally forged pins join halves of links together. Interlocking lugs distribute the load. Size WLL (lbs.) BTC /4"...1,400 BTC /16"...2,000 BTC /8...2,800 BTC /2"...4,750 BTC /8"...7,250 BTC /4"...10,250 Grab Hook - Stainless Investment cast 316 Stainless Steel. SDG /4" Chain SDG /2" Chain Latch Hook Drop forged carbon steel. Heat treated & galvanized to ASTM A-153. Overall Working Load Size Length Limit (lbs.) BTC /16"...4-1/16" lbs. Connecting Links, Pear Shaped Galvanized, drop forged carbon steel, heat treated. Size WLL (lbs.) BTC /8"...1,850 BTC /2"...3,300 BTC /8"...5,000 BTC /4"...7,100 BTC /8"...9,600 Hook, Clevis Grab Drop forged. Finish is self-colored. Size WLL (lbs.) BTC /4"...2,600 BTC /16"...3,900 BTC /8"...5,400 BTC /2"...9,200 Sling Links, Weldless Galvanized, drop forged & heat treated. Size WLL (lbs.) BTC /8"...1,600 BTC /2"...2,900 BTC /8"...4,200 BTC /4"...6,000 BTC /8"...8,300 BTC "...10,800 Galvanized Lap Link Electrogalvanized mild steel. Bulk. Size SDG /16" SDG /4" SDG /16" SDG /8" SDG /2" End Links Stainless steel "B" Size Stock Length NOREL0...7/8" /2"...2-3/4" NOREL1...15/16" /16"...3-1/8" NOREL2...1" /16"...3-5/8" NOREL /8" /16"...4-1/4" See Also: Seine section for more rings & end links "B" Steel Safety Hook Swivel TONS SFED Safety Hook Swiv..3.15T...XLE 16-8 SFED Safety Hook Swiv..3.15T...XLE 5/6-8 SFED Safety Hook Swiv..2.T...XLE 7/8-8 SFED Safety Hook Swiv T...XLE 10-8 SFED Safety Hook Swiv..5.3 T...XLE 13-8 Fixed Eye TONS SFED Safety Hook T...XLO 5/6-8 SFED Safety Hook...2 T...XLO 7/8-8 SFED Safety Hook T...XLO 10-8 SFED Safety Hook T...XLO 13-8 SFED Safety Hook...8 T...XLO 16-8 SFED Safety Hook T...XLO 18/20 Eye Hoist Hooks Drop forged & heat treated. Galvanized hooks with latches. Size WLL (tons) BTC /4 BTC BTC /2 BTC BTC

3 Thimbles 449 Galvanized Heavy Wire Rope Thimbles - Domestic Note: Thimbles not designed for load carrying purposes. Working load limits have not been established. Rope Size Length BTC /4"...2-1/8" BTC /16"...2-1/2" BTC /8"...3" BTC /2"...3-5/8" BTC /8"...4-1/4" BTC /4"...5" BTC /8"...5-1/2" BTC "...6-1/8" BTC /8" - 1-1/4"...7" Heavy Duty Thimbles with Gussets Galavnized. Size WCWGT12...1/2" WCWGT58...5/8" WCWGT34...3/4" WCWGT78...7/8" WCWGT1...1" WCWGT /4" WCWGT /2" Heavy Duty Stainless Tube Thimbles Size SFEBG815K...1/2" SFEBG819K...5/8" SFEBG824K...3/4" -7/8" SFEBG827K...1" Heavy Duty Tube Thimbles Heavy Duty Tube Thimbles with Gussett SFEBG712...Tube Thimble 3/8 Blue SFEBG715...Tube Thimble 1/2 Blue SFEBG719...Tube Thimble 5/8 Blue SFEBG722...Tube Thimble 3/4 Blue SFEBG725...Tube Thimble 7/8 Blue SFEBG719K...5/8" Blue with Gussett SFEBG722KR...3/4" Blue with Gussett SFEBG725K...7/8" Blue with Gussett SFEBG730KR...1" Blue with Gussett Thimble with Ears Black nylon thimble with ears. Rope Dia. Hole Length Width SDG Thimble 1/4...11/ / /8 SDG Thimble... 3/8...3 / / /8 SDG Thimble... 1/ / / /16 SDG Thimble... 5/ / / Wire Rope Thimble Stamped hot dipped galvanized. Made in China. Rope or Wire Dia. Length SDG /8"...2" SDG /16"...2-3/16" SDG /4" /16" SDG /16"...2-3/16" SDG /8"...2-1/2" SDG /2"...2-3/4" SDG /8"...3-1/2" SDG /4"...3-3/4" SDG /8"...5-5/8" SDG "...5-5/8" Light Thimble Stamped 304 stainless steel. Dimensions: OD length: 1-3/8". ID length: 15/16". Width: 1/2". SDG Thimble Light Pattern SS 3/8 SDG Thimble Light Pattern SS 1/2 SDG Thimble Light Pattern SS 5/8 Heavy Duty Stainless Thimble Stamped 304 stainless steel. 1/8, 3/16, & 1/4". 2 ea per display pack Wire Bulk D.P. Dia SDG /16" SDG SDG /8" SDG /32" SDG SDG /16" SDG SDG /4" SDG SDG /16" SDG SDG /32" SDG SDG /8" SDG SDG /2" SDG SDG /8" SDG SDG /4" SDG /8" SDG " SDG /4" Tear Drop Thimble Injection molded nylon. White. Rope Dia. Hole Length SDG Thimble Nylon.. 1/4...9/ /16 SDG Thimble Nylon.. 5/ /16 SDG Thimble Nylon.. 3/ /16 SDG Thimble Nylon.. 1/ /8 SDG Thimble Nylon.. 5/ / /8 SDG Thimble Nylon.. 3/ / /16 SDG Thimble Nylon / /16

4 450 Turnbuckles Jaw & Jaw Turnbuckles - Domestic Drop forged carbon steel with galvanized finish. Weldless. Jaws on sizes 1/4" through 5/8" have hex head bolt. Jaws on sizes 3/4" through 1-1/2" have cotter key & bolt. Meets design requirements federal specs/astm F Galvanizing meets ASTM A-153 specs. Design factor is 5 to 1. Thread Dia x Working Takeup (inches) Load Limit (lbs.) BTC /4" x 4" BTC /16" x 4-1/2" BTC /8" x 6"...1,200 BTC /2" x 6"...2,200 BTC /2" x 9"...2,200 BTC /2" x 12"...2,200 BTC /8" x 9"...3,500 BTC /8" x 12"...3,500 BTC /4" x 6"...5,200 BTC /4" x 9"...5,200 BTC /4" x 12"...5,200 BTC /8" x 12"...7,200 BTC /8" x 18"...7,200 BTC " x 12"...10,000 BTC /4" x 12"...15,200 Hook & Eye Turnbuckles - Domestic Carbon steel, galvanized. Size BTC /4" x 4" BTC /16" x 4 1/2" BTC /8" x 6" BTC /2" x 6" BTC /2" x 12" Larger sizes available on request. Eye & Eye Turnbuckles -Domestic Carbon steel, galvanized. Size BTC /16" x 4-1/2" BTC /8" x 6" BTC /2" x 9" BTC /2" x 12" Larger sizes available on request. Jaw & Jaw Turnbuckle - Import Machined AISI 316 Stainless. Electropolished bright finish. Thread sizes & wire rope sizes conform to U.S. standards & are interchangeable with most other U.S. manufacturers. Thread Break Std....A...B...C...D...E F Load Weight Pack SDG mm...7-1/16"...4-3/4"...3-1/8"...1/4" 3/16" 1, Lb. 1 ea. SDG / /4" /16"..3-9/16"...3/8" 1/4" 2, Lb 1 ea. SDG / /8"...6-7/8"...4-5/16"...7/16" 5/16" 5, Lb 1 ea. SDG / "...7-7/8"...4-3/4"...1/2" 3/8" 7, Lb 1 ea. SDG / /16"..9-5/8" /16"..9/16" 1/2" 11, Lb 1 ea. SDG / /8" /16"..7-1/2"...7/8" 5/8" 17, Lb 1 ea. SDG / /2" /4" /16"...1" 3/4" 28, Lb 1 ea. Galvanized Jaw & Jaw Turnbuckle - Import Made in China. Forged hot dipped galvanized. Unrated. A B C D E Weight SDG /4"...7-1/2" /2"...1/4"...3/8" SDG /16"...8-7/8" /4"...1/4"...1/2" SDG /8" /2" /2"...5/16"...1/2" SDG /2" /2" /2"...3/8"...5/8" SDG /8" /4" /4"...1/2"...3/4" SDG /8" /2" /2"...1/2"...3/4" SDG /4" /4" /4"...5/8"...15/16".40 lb.57 lb..93 lb lb lb lb lb.

5 Load Binders / Cable Pullers 451 Campbell Cable Pullers Double drive ratchet wheels, easy let-down releases. For aircraft-type 3/16" galvanized wire. WLL (lbs.) CAM Imported...1,500 CAM Imported...3, Grappling Hook Galvanized. 7 lb. FIFGH7...Grappling Hook 7 lb. Load Binders Chain Size Type WWL US Made CAM /4"...Lever...1,250 lbs. CAM /16" - 3/8"...Lever...5,400 lbs. Imported CAM /16" - 3/8"...Lever...5,400 lbs Chain Size Type WWL CAM /16" - 3/8"...Ratchet...5,400 lbs.

6 452 Wire Rope Clips Galvanized, unassembled. Wire Rope Clips - Domestic Forged steel, galvanized. Size COV /8" COV /16" COV /4" COV /16" COV /8" COV /2" COV /4" Size BTC /8" BTC /16" BTC /4" BTC /16" BTC /8" BTC /16" BTC /2" BTC /16" BTC /8" BTC /4" BTC /8" BTC " BTC /2" Malleable Wire Rope Clip Electro galvanized steel. Bulk. Stainless Eye Nut Investment cast 316 stainless steel. N.C. threads. Wire Size SDG /8" SDG /16" SDG /4" SDG /16" SDG /8" SDG /16" SDG /2" SDG /8" SDG /4" SDG /8" SDG " Stainless Wire Rope Clip Body is investment cast 316 stainless steel. U-bolt is AISI 304 stainless steel. Display packed. (1/2" is bulk) Wire Size SDG /32" SDG /8" SDG /32" SDG /4" SDG /16" SDG /8" SDG /2" SDG /4" thread, 3/16 stock SDG /16" thread, 1/4 stock SDG /8" thread, 5/16 stock SDG /2" thread, 5/8" stock Wire Rope Clips / Eyebolts Eye Nuts - Domestic Drop forged & normalized carbon steel. Galvanized to ASTM specifications. Design factor is 5 to 1. Size Stock Working No. Size Thread Load Limit BTC A...1/4"...5/16" BTC /16"...3/8"...1,250 BTC A...3/8"...1/2"...2,250 BTC /2"...5/8"...3,600 BTC /8"...3/4"...5,200 BTC /4"...7/8"...7,200 Stainless Eyebolt Machined 304 stainless. Metric threads. Display pack. Eyebolts, Regular Carbon steel, galvanized Size Working Load Limit BTC /8" x 4-1/2"...1,250 lbs. BTC /8" x 6"...1,250 lbs. BTC /2" x 3-1/4"...2,250 lbs. BTC /2" x 6"...2,250 lbs. BTC /2" x 8"...2,250 lbs. BTC /8" x 4"...3,600 lbs. BTC /8" x 6"...3,600 lbs. BTC /8" x 8"...3,600 lbs. BTC /4" x 6"...5,200 lbs. BTC /8" x 5-1/8"...5,200 lbs. Eyebolt Machined AISI 304 stainless steel.. SDG /4 x 1-1/8 shaft SDG /4 x 2-5/16 shaft SDG /16 x 1-5/16 shaft SDG /16 x 3 shaft SDG /8 x 1-15/16 shaft SDG /8 x 3-15/16 shaft SDG /2 x 3-15/16 shaft SDG /2 x 6-5/16 shaft Shoulder Eyebolt Forged, hot dip galvanized. Shaft sizes are listed. SDG /4 x 2" SDG /4 x 4" SDG /16 x 2-1/4" SDG /16 x 4-1/2" SDG /8 x 2-1/2" SDG /8 x 4-1/2" SDG /2 x 3-1/4" SDG /2 x 5-7/8" SDG /8 x4-1/8" SDG /8 x 6" SDG /4 x 4-1/2" SDG /4 x 6" SDG Eyebolt SS 5/16 x 4-5/16 SDG Eyebolt SS 8/8 x 5-1/8

7 Swivel Fittings 453 Anchor Swivel AISI316 stainless steel. Break Chain Sizes Length Hole Strength SDG Anchor Swivel 1/4-5/ / /16...5,500 SDG Anchor Swivel 5/16-1/ / /16..17,000 SDG Anchor Swivel 1/2-5/ / /16..21,500 Stainless Jaw & Eye Swivel Investment cast 316 stainless body, 304 stainless pin. Display packed. (1/2" is bulk) Size Length SDG /4"...2-9/16" SDG /16" /16" SDG /8"...4-5/8" SDG /2"...6" Eye & Eye Swivel - Domestic Carbon steel, galvanized. Stock Overall Working Dia Length Load Limit BTC /4"...3-3/8" lbs. BTC /16"...4-1/8"...1,250 BTC /8"...5"...2,250 BTC /2"...6-3/4"...3,600 BTC /8"...8"...5,200 BTC /4"...8-3/4"...7,200 BTC /8" /8"...10,000 BTC " /4"...12,500 Jaw & Jaw Swivel Cast 316 stainless body. 304 stainless pin. Display packed. Size Length SDG /4"...2-9/16" SDG /16" /16" SDG /8"...4-5/8" SDG /2"...6" Jaw & Eye Swivel - Domestic Carbon steel, galvanized. Stock Overall Working Dia. Length Load Limit BTC /4"...3-3/8" lbs. BTC /16"...4-1/8"...1,250 BTC /8"...5"...2,250 BTC /2"...6-3/4"...3,600 BTC /8"...8"...5,200 BTC /4"...8-3/4"...7,200 BTC /8" /8"...10,000 BTC " /4"...12,500 BTC /4" /16"...18,000 Eye & Eye Swivel Forged, hot dip galvanized. Size WLL (tons) SDG /4"...1/2 SDG /16"...3/4 SDG /8"...1 SDG /2"...1-1/2 SDG /8"...2 SDG /4"...4-3/4 Eye & Eye Swivel Investment cast 316 stainless. Size A B Weight Pk. SDG /16"...2-5/16"...1/2" Lb...10 ea. SDG /4"...2-9/16"...9/16" Lb...10 ea. SDG /16"...3-5/8"...13/16" Lb...10 ea. SDG /8"...4-5/8"...15/16" Lb...10 ea. SDG /2"...6"...1-3/16" Lb...5 ea. SDG /8"...7-5/16"...1-1/2" Lb...1 ea. SDG /4"...8-3/4"...1-9/16" Lb...1 ea. SDG " /2"...2-7/16" Lb...1 ea. Jaw & Eye Swivel Forged, hot dipped galvanized. Size WLL (tons) SDG /4"...1/2 SDG /16"...3/4 SDG /8"...1 SDG /2"...1-1/2 SDG /8"...2 SDG /4"...4-3/4

8 454 Rings Galvanized Ring Formed, hot dipped galvanized rings. Inside diameter listed. Bulk. Size Dia. SDG /4"...1-1/2" SDG /4...2" SDG /4"...2-1/2" SDG /16"...2 SDG /8"...2-1/2" SDG /8"...3" SDG /2"...3" SDG /2"...4" SDG /8"...4" SDG /8"...5" Stainless Steel Rings Sizes are wall dimension x inside diameter. Size SDG /8" x 3/4" SDG /16 x 3/4" SDG /16" x 1" SDG /16" x 1-3/16" SDG /4" x 1" SDG /4" x 1-1/4" SDG /4" x 1-1/2" SDG /16" x 1-1/2" SDG /16" x 1-3/4" SDG /16" x 2" SDG /16" x 2-1/4" SDG /8" x 2-1/2" SDG /8" x 3-1/4" Bronze Ring Die cast manganese bronze. Inside diameter listed. Bulk. Size Dia. SDG /16"...1-1/16" SDG /16"...1-1/8" SDG /16"...1-1/4" SDG /4"...1-1/2" SDG /4"...2" Stainless Steel Rings Heavier rings Size HMISSR /2" x 3" HMISSR /2" x 4" HMISSR /2" x 5" HMISSR /2" x 6" HMISSR /2" x 10" HMISSR /8" x 6" HMISSR /8" x 8" HMISSR /4" x 6" Bronze Pelican Hook Fits over stock up to 9/16" diameter. SDG " Stainless Pelican Hook Will fit over stock up to 3/4". Bulk or display packed. Length Length SDG " SDG " Nylon Round Ring Injection molded nylon. Stock Dia ID Color SDG Ring Nylon...3/8 X 2...White SDG Ring Nylon...5/16 X 1-1/2...White SDG Ring Nylon...9/32 X 1-1/4...White SDG Ring Nylon...3/8 X 1-3/4...White SDG Ring Nylon...1/4 X 1...White SDG Ring Nylon...3/8 X 2...Black SDG Ring Nylon...9/32 X 1-1/4...Black SDG Ring Nylon...1/4 X 1...Black Loomis Plastic Purse Rings High tensile engineered plastic. Very abrasion resistant. Near neutral buoyancy in salt water. Sizes are wall dimension x inside diameter. Size LPCPR6...1" x 6" LPCPR8...1" x 8"

9 Bow Eyes 455 U-Bolt Stainless steel U-bolt with crimped ears. Stock Useable Stud Dia. Length Space SDG /16"...1"...1-3/16" SDG /4"...1-3/8"...1-5/16" SDG /4"...1-1/16"...1-5/16" SDG /16"...1-3/8"...1-5/16" SDG /16"...2"...1-5/16" SDG /16"...3-1/4"...1-5/16" Stainless Bow Eye All stainless steel. Complete with nuts & plates. Display pack. SDG /8" x 1-1/2" SDG /8" x 2-1/2" SDG /8" x 3-1/2" SDG /8" x 4-1/4" SDG /2" x 3-1/2" SDG /16" x 3-1/2" Seadog Chrome Bow Eye Chrome zinc bow eye. Shank Length Stock Dia. SDG "...3/8" SDG "...3/8" Bow Eye - Display pack Chromed zinc head, galvanized steel shaft. SDG /8 x 3 SDG /8 x 5 Perko Bow Eyes Stainless steel #300 series non-magnetic Stainless steel nuts & washers. Shank Lgth. Thrd. Lgth. Eye I.D. SWL PRK237DP1...3"...3"...1"...1,800 lbs. PRK237DP2...6"...6"...1"...1,800 lbs. PRK237DP3...3"...3"...1-1/8"...3,000 lbs. Perko Bow Eye Chrome plated zinc eye with zinc plated steel u-bolt, nuts, & washers. Shank Lgth. Thrd. Lgth. ID Eye SWL PRK1235DP...3"...2-3/4"...1"...2,000 lbs. Perko Transom Eye Stainless steel #300 series non-magnetic. Use as towing or lashing eye. Shank Lgth. Diameter Eye I.D. SWL PRK236DP1...3"...5/16"...1"...1,800 lbs. PRK236DP3...3"...3/8"...1-1/8"...3,000 lbs. PRK236DP /4"...1/2"...1-1/2"...4,600 lbs. Anchor Point Forged steel zinc plated. Dimensions: length 2-9/16". Eye hole 5/8". SDG Anchor Point Twin Shank Bow Eye Chrome zinc head, chromed steel shaft. Display pack. SDG /16" x 3 Ski Tow Transom mount ski tow. Formed AISI 316 stainless steel. Display pack. Thread Stock Ring Length Dia. Dia. SDG /4"...3/8"...2-1/2" SDG /4"...3/8"...3" SDG "...1/2"...3-1/2" Stern Eye All parts are stainless steel. Display pack. SDG /8 x 3-1/2 SDG /2 x 4-3/4

10 456 Shackles Shackle, Screw Pin Anchor - Domestic Carbon steel, galvanized. Working Load Size Limit (tons) BTC /16"...1/3 BTC /4"...1/2 BTC /16"...3/4 BTC /8"...1 BTC /16"...1-1/2 BTC /2"...2 BTC /8"...3-1/4 BTC /4"...4-3/4 BTC /8"...6-1/2 BTC "...8-1/2 BTC /8"...9-1/2 BTC /4"...12 BTC /8" /2 BTC /2"...17 Safety Anchor Shackle - Domestic Carbon steel, galvanized. Working Load Size Limit (tons) BTC /2"...2 BTC /8"...3-1/4 BTC /4"...4-3/4 BTC /8"...6-1/2 BTC " BTC /4" BTC /2" BTC " Larger sizes available on request. Galvanized Anchor Shackle - Import Drop forged, hot-dipped galvanized screw pin shackle. Load rated shackles comply with Federal Spec. RR-C- 271b. Size Pin WLL (Tons) SDG /16"...1/4"...1/3 SDG /4"...5/16"...1/2 SDG /16"...3/8"...3/4 SDG /18"...7/16"...1 SDG /16"...1/2"...1-1/2 SDG /2"...5/8"...2 SDG /8"...3/4"...3-1/4 SDG /4"...7/8"...4-3/4 SDG /8"...1"...5 SDG "...1-1/8"...7-1/2 Wide D-Shackle (Mooring Buoy) Forged 316 stainless. Bolt W Gap Length BreakStrength SDG Shackle D 3/16..13/ /16...2,200 SDG Shackle D 1/ / /16...3,000 SDG Shackle D 3/ / /4...9,000 D Shackle Stainless steel, forged. Stock# Bow Shackle Stainless steel.investment cast Stock# Size SDG /32" SDG /16" SDG /4" SDG /16" SDG /8" SDG /16" Size SDG /16" SDG /4" SDG /16" SDG /8" SDG /2" SDG /8" SDG /4" SDG /8" SDG " Anchor Shackle - Import Hot dipped galvanized. General purpose shackle. Pin size not listed. Display pack. Stock Dia. SDG /16" SDG /4" SDG /16" SDG /8" SDG /16" SDG /2"

11 Shackles 457 D-Shackle - Stainless Investment cast 316 stainless steel body. 3/16" thru 7/16" are display packed. Pin Throat SDG /16"...5/16" SDG /4"...1/2" SDG /16"...5/8" SDG /8"...13/16" SDG /16"...1" SDG /8"...1-1/4" SDG /4"...1-1/2" Forged Bow Shackle 316 forged stainless steel. Pin Break SDG /32" lb SDG /16" lb SDG /4" lb SDG /16" lb SDG /8" lb SDG /2" lb Captive Pin Shackle Forged 316 stainless steel. Dimensions: Length ID (center pin to center shackle): 1-13/16". Shackle opening: 15/16". Pin dia: 5/8". SDG Shackle D Long Captive Pin 3/8" Twisted Shackle Forged 316 stainless steel. Display packed. Pin Break SDG /32" lb SDG /16" lb SDG /4" lb SDG / lb SDG /8' lb D-Shackle Stamped 304 stainless steel. Breaking strength 2,640 Length Throat Eye Hole SDG Shackle D...3/16"...5/8"...1" Bow Shackle - Stainless Investment cast 316 stainless body. Display packed. (5/8" & 3/4" are bulk) Pin Throat SDG /16"...5/16" SDG /4"...1/2" SDG /16"...5/8" SDG /8"...13/16" SDG /2" /16" SDG /8"...1-1/4" SDG /4"...1-7/16" SDG /8"...1-3/4" SDG " /16" Bow Shackle Captive Pin Forged 316 stainless. Break Bolt W Gap Hole Length Strength SDG Shackle Bow..1/4"...1/2"..13/16"...1-1/4"...3,300 Buoy 1" Shackle Stainless steel or galvanized. For tough applications. PVC bushing. Distributes load over entire ropehold area. POL52...Galvanized #52-1 Bushing POL53...Stainless Steel #53-1 Bushing Long D-Shackle Forged 316 stainless steel - 5/16 in Display Pack. Pin Throat Length Break # SDG /16"...7/16"...1-5/ SDG /4"...1/2"...1-3/16" SDG /16"...11/16"...2-7/16" Buoy 1 1/4" Shackle Stainless steel or galvanized. For tough applications. PVC bushing. Distributes load over entire rope hold area. POL50... Galvanized #50-1-1/4 Bushing POL51... Stainless Steel #51-1-1/4 Bushing

12 458 Wichard Blocks Single Block Swivel Head Sheave dia 1-3/8". Rope size 5/16". Stamped shackle. Height Width Thickness Function Lbs Break Load 3-1/16" 1-3/8" 7/8" WCH Block Single Swivel Head Block - Single Fixed Eye Sheave dia 1-3/8", rope size 5/16". Stamped shackle. Height Width Thickness Function Lbs Break Load 2-7/8" 1-3/8" 3/4" WCH Block Single Fixed Eye Single Block Swivel Head Sheave dia. 1-3/8", rope size 5/16". Stamped shackle Height Width Thickness Function Lbs Break Load 3 1/16" 1-3/8" 7/8" WCH Block Single Swvl Head with Becket Block - Single Fixed Eye Sheave dia 1-3/8", rope size 5/16". Stamped shackle. Height Width Thickness Function Lbs Break Load 2-3/16" 1-3/8" 7/8" WCH Block Single Cheek Style Single Block Swivel Head with Becket Sheave dia 2-3/4" - rope size 9/16" - forged shackle. Height Width Thickness Function Lbs Break Load 7 3/8" 2-29/32" 1-11/16" WCH Block Single Swivel Head Becket 9/16 Double Block Swivel Head Sheave dia. 1-3/8", rope size 5/16". Stamped shackle. Height Width Thickness Function Lbs Break Load 3-1/16" 1-3/8" 1-17/16" WCH Block Double With Swivel Head Single Block Swvl Head w/becket&cam Sheave dia 1-3/8". Rope size 5/16". Stamped shackle. Height Width Thickness Function Lbs Break Load 3-1/16" 1-3/8" 7/8" Block - Single Fixed Eye Sheave dia 1-3/8", rope size 5/16". Stamped shackle. Height Width Thickness Function Lbs Break Load 2-7/32" 1-25/32" 1-23/32" WCH Block Single Swivel Head WCH Block Single Exit Style Double Block - Swivel Head Sheave dia 1-3/8", rope size 5/16". Stamped shackle. Height Width Thickness Function Lbs Break Load 3-23/32" 1-3/8" 1-17/32" WCH Block Double Swivel Head with Becket Height Width Thickness Function Lbs Break Load 6-5/16" 2-29/32" 2-3/8" WCH Block Double Swivel Head 9/16 Dana Olsen

13 Blocks / Snatch Blocks 459 Steel wire rope drop latch snatch blocks. Red. For wire Size rope size Strength WCW3...3"...7/32" - 1/4" tons WCW4...4"...1/4" - 3/8"...3 tons WCW5...5"...5/16" - 1/2" tons WCW6...6"...7/16" - 9/16"...6 tons WCW8...8"...7/16" - 13/16"...8 tons Drop Link Snatch Block Drop forged & galvanized. Double cross bolted shell. Supplied with bronze self-lubricating bushing. Available with wood or steel shell. Blocks are mostly used for lead blocks. Not recommended for hoisting. Steel Shell Size Rope Size WLL (lbs.) BTC "...7/8"...2,400 BTC "...1"...4,800 Aluminum Snatch Block Cast marine grade aluminum. Forged galvanized eye bolt. Pulleys have bronze oillite bushings & zerk for lubrication. Stainless steel shaft & fasteners. Safe working load: FB030 1,200 lb., FB050 2,500 lb. OA Sheave Sheave Size Length Dia Width Throat Weight FBFOFB /2"...1-7/8"...1-9/16"...1-7/16"..3.5# FBFOFB "...3-3/8"...1-3/4"...1-3/4"...6.5# Wood Shell Size Rope Size WLL (lbs.) BTC "...3/4" BTC "...7/8"...2,400 BTC "...1"...4,800 Superior Aluminum Blocks Quality blocks feature: Solid aluminum sheave. Water/grit protected by stainless steel seals. Castings are aluminum alloy. Hook is forged steel, galvanized with safety catch, wear plate & greaseable swivel. Both blocks have a capacity of 2,000 lbs. Size SMP4HL...4" sheave SMP5HL...5" sheave Wire Rope Oval Block Galvanized. Drop forged. Grooved bronze pressure grease lube sheaves. Round pin shackles. Available in single or double configuration. Size Rope Size WLL (lbs.) BTC " Sgl...3/8"-1/2"...4,000 BTC " Dbl...3/8"-1/2"...4,000 BTC Try Net Block Block is bronze bushed with lemite lubrication. 6" hardened steel sheave. Its oblong swivel eye permits upsetting of shackle. Work Load Limit Weight BTC tons...19 lbs. BTC tons...22 lbs. Wire Rope Oval Block Galvanized steel wire rope blocks. Single block rated at 4 ton, double block at 6 ton. 8.5" W x 17" H. Bronze bushed. Pressure grease lube fitting. Accepts 9/16" wire rope. SKO " Single Steel Block SKO " Double Steel Block

14 460 Blocks Metal Manila Rope Blocks Galvanized finish. Connections & shells are drop forged steel. Bronze self-lubricating bushings. Available w/hook or shackle. Size Rope Size Single Double 3"...3/8" ,000 4"...1/2"...1, ,600 6"...3/4"...2, ,300 Single Blocks Type Size BTC Hook...3" BTC Shackle...3" BTC Hook...4" Double Blocks Type Size BTC Shackle...6" Purse Seine Open Block Heavy duty galvanized steel structure. 5,000 lb safe working load. Quality aluminum sheave. Stainless steel axle. Completely greaseable. Sheave diameter is 8". PLKOPB Wood Blocks Wood, all galvanized hardware. Bronze self-lubricating bushings. Available with hook or shackle. Safe Work Load (lbs.) Size Rope Size Single Doulbe Triple 3"...3/8" ,200 4"...1/2"...1, , ,800 5"...5/8"...1, , ,400 6"...3/4"...1, , ,200 8"...1"...2, , ,800 Single Blocks Type Size BTC Hook...3" BTC Shackle...4" BTC Hook...4" BTC Shackle...5" BTC Hook...5" BTC Shackle...6" BTC Hook...6" BTC Shackle...8" Pilkington No. 2 Open Block Safe working load - 1,400 lbs (based on a 4:1 safety factor). Bronze oilite bushing. Aluminum sheave. Galvanized steel frame. 5/8" galvanized eye bolt. Stainless axle assembly. Sheave diameter is 4-1/2". Sheave depth is 1-3/4". Weight: 7 lbs. PLKPB2 Pilkington No. 3 Open Block Safe working load - 4,000 lbs (based on a 4:1 safety factor) Bronze oilite bushing, aluminum sheave. Galvanized steel frame, 5/8 galvanized eye bolt. Stainless axle assembly. Sheave diameter is 4-1/2" Sheave depth is 2-7/8". Weight: 10 lbs. PLKPB3 Double Blocks Type Size BTC Hook...3" BTC Shackle...4" BTC Hook...4" BTC Shackle...5" BTC Hook...5" BTC Shackle...6" BTC Hook...6" BTC Shackle...8" Triple Blocks Type Size BTC Hook...4" BTC Shackle...6" BTC Hook...6"

15 Pulleys / Cupboard Catches 461 Pulley Stainless Steel Pulley stainless steel with plastic sheave. Overall length 1-13/16". Sheave dia.1". Wire dia. 1/4".Pulley width:1/2" SDG Pulley SS with Plastic Sheave SDG SS with Plastic Sheave - Display Pack SDG Pulley with Brass Sheave Cupboard Bolt Chrome plated zinc. Black plastic slide & knob. Overall Dimension PRK1101DP...2-1/8" x 1-1/2" Single Swivel Pulley Single swivel pulleys of 1 piece cast build with: Triple, nickel cast plating. Solid brass or brass plated sheaves. Size Work Load CAM Pulley Swivel 3/ Lb CAM Pulley Swivel Lb CAM Pulley Swivel 1-1/4"...50 Lb CAM Pulley Swivel 1-1/2"...50 Lb CAM Pulley Swivel Lb CAM Pulley Swivel 1/ Lb Single Rigid Pulley Single, rigid pulleys of 1 piece cast construction with: Triple nickel cast plating. Solid brass or brass plated sheaves. Size Work Load CAM Pulley Rigid 1/2"...30 Lb CAM Pulley Rigid 3/4"...30 Lb CAM Pulley Rigid Lb CAM Pulley Rigid 1 1/4" Lb CAM Pulley Rigid 1 1/2" Lb CAM Pulley Rigid Lb Cupboard Turn Chrome plated zinc. Overall Dimensions PRK978DP...2-3/8" x 2-3/8" Cupboard Catches Chrome plated zinc construction. #6 screw size. Overall Dim. Strike Type PRK1102DP /2" x 1-7/8"...Flush PRK1102DP /2" x 1-7/8"...Offset Cupboard Bolt Chrome plated brass. Display pack. Width Length SDG /2"...2-1/4" Double Pulley Double pulleys of 1 piece cast construction with: Choice of swivel or rigid. Triple nickel cast plating. Solid brass or brass plated sheaves. Size Work Load CAM Pulley Rigid 3/4"...40 Lb CAM Pulley Rigid Lb CAM Pulley Rigid 1 1/2"...90 Lb CAM Pulley Swivel 3/4"...25 Lb CAM Pulley Swivel Lb

16 462 Window & Hatch Fasteners Window Handle Polished stainless steel. For 1/4" glass. Length PRK954DP...3" Hatch Fastener or Windshield Keeper Chrome plated brass construction with phosphor bronze spring. Overall Length Mounting Base PRK155DP...3-7/8"...1-1/2" x 9/16" Window Stop Chrome plated zinc. Mounting Plate Stopping Plate Length Length PRK935DP...1-7/8" x 3/4"...1-1/2" Sliding Window Lock & Anti-Rattler Chrome plated zinc with black plastic knob & tip. Overall Ht Mounting Plate Size PRK934DP...1"...2" x 5/8" Hatch Fastener or Windshield Keeper Chrome plated brass & zinc construction. Keeper Dimension Plate Dimension PRK697DP...1-1/2" x 5/8"...1-1/2" x 3/4" Perko Hatch Fastener or Windshield Keeper Chrome plated brass and zinc construction. Black plastic handle. Hatch Fastener Chrome plated bronze. Base Dimension PRK769DP...1-1/2" x 5/8" Overall Length Adj. Thread PRK770DP...3-3/4"...2-1/4" Anti-Rattle Fastener Cast chrome plated brass. Display pack. Width Length SDG /16" 4-1/2" Windshield Adjusters Chrome plated brass & zinc construction. Black plastic knob. Closed Length Open Length PRK1179DP1...10"...18" PRK1179DP2...12"...20" Windshield Adjusters Chrome plated zinc. Black plastic knobs. Overall Adj. Mount Type Length Length PRK1290DP...12"...9-1/2"...Side Hold-Down Clamp Chrome plated bronze construction. Length Width Mount PRK1112DP...3"...1-1/2"...Flat PRK1113DP...2-1/2"...1-1/2"...Angle SeaDog Hatch Latch Stamped 304 stainless. SDG S.S. Latch

17 Perko Latch Sets 463 Tubular Latch Set Chrome plated zinc. Sliding lock button. PRK567DP Door Thickness Dimensions O.D. Tube Screw Size Weight 1-1 3/8" 4-3/8" x 1-1/4" 3/4" 6 3/4 lb. Flush Cup - Rim Latch Set For door thicknesses 3/4" to 1-1/8". Chrome plated zinc. Sliding lock button. Regular bevel with box strike. Supplied with black plastic spacer for surface mounting. Case screw size #6. Cup screw size #8. Bevel / Strike Type Dimensions (case) O.D. (cup) Weight PRK1279DP...Regular with box...2-1/8" x 1-3/4"...2 x 2-1/4" 1 Spare Parts: PRK976000CHR...Spare box strike. PRK912000CHR...Spare flush strike. PRK920000CHR...Spare reverse bevel with cam. Rim Latch Set For door thicknesses 5/8" to 1-3/8". Chrome plated zinc door lock. Sliding lock button. Regular bevel with box strike. Reverse bevel with flush strike. Screw size #6. Dimensions Bevel / Strike Type Dimensions (case) Escutcheon Weight PRK928DP Regular...2-1/8" x 1-3/4"...4-3/8" x 1-1/4" 3/4 lb PRK1028DP Reverse...2-1/8" x 1-3/4"...4-3/8" x 1-1/4" 3/4 lb. Spare Parts: PRK976000CHR...Spare box strike. PRK962000CHR...Spare knob & handle assembly. PRK920000CHR...Spare reverse bevel with cam. Rim Latch Set For door thicknesses 5/8" to 1-3/8". Chrome plated zinc. Sliding lock button. Reverse bevel with flush strike. Regular bevel with flush strike. Dimensions Bevel / Strike Type Dimensions (case) Escutcheon Weight PRK930DP...Regular...2-1/8" x 1-3/4"...4-3/8" x 1-1/4" PRK1030DP...Reverse...2-1/8" x 1-3/4"...4-3/8" x 1-1/4" 3/4 lb 3/4 lb. Screw size #Spare Parts: PRK912000CHR...Spare flush strike. PRK962000CHR...Spare knob and handle assembly. PRK920000CHR...Spare reverse bevel with cam.

18 464 Perko Lock Sets Rim Lock Set Chrome plated zinc. For door thickness 5/8" to 1 3/8". Locks by turn button from inside or key from outside. Screw Size: 6. PRK918DP...Regular Bevel with Box Strike. PRK919DP...Reverse Bevel with Flush Strike. Door Bevel Dimensions Dimensions Strike Type Case Escutcheon Regular w/box...3-7/8" x 2"...4-3/8" x 1-1/4" Reverse w/flush...3-7/8" x 2"...4-3/8" x 1-1/4"... Spare Parts: PRK918-99A...Spare Box Strike PRK913000CHR...Spare Flush Strike PRK962000CHR...Spare Knob & Handle Assembly PRK920000CHR...Spare Reverse Bevel with Cam PRK953000CHR...Spare Escutcheon Plate with Keys Mortise Latch Set Door thicknesses 1" to 1-3/8". Chrome plated zinc. Turn button lock. Screw size #6. Bevel can be reversed during installation. Dimensions Dimensions (case) Escutcheon Weight PRK960DP...2-1/4" x 1-13/16"...4-3/8" x 1-1/4" 1 Lb. Spare Parts: PRK912000CHR...Spare Flush Strike. PRK962000CHR...Spare knob & handle assembly. Lockset Flush lock. Face plate: 2-1/4" x 2". Chrome plated zinc alloy. Hole Dia. Door Thickness PRK921DP...Lockset Flush /8"... 1/2" to 3/4" Mortise Lock Set Chrome plated zinc. Locked by turn button from inside or key from outside. Screw Size: 6. Bevel can be reversed during installation. PRK927DP...Mortise Lock Set For Door Dimensions Dimensions Thickness Case Escutcheon 1-3/8"...2-3/4" x 2"...4-3/8" x 1-1/4" Spare Parts: PRK913000CHR...Spare Flush Strike PRK962000CHR...Spare Knob and Handle Assembly PRK920000CHR...Spare Regular Bevel with Cam Lockset Flush Chrome plated zinc alloy. Black plastic face. Stainless steel stem and lock nut. With offset cam bar & flexible plastic strike. Hole Dia. Door Thickness PRK931DP1BLK...Lockset...2"...1/4" to 1-1/8"

19 Catches 465 Elbow Catch Extruded brass. Dimensions: Length: 1-1/8". Height: 1-5/16". Perko Door Catch White plastic with stainless steel spring. Chrome brass plated screw. 18 pound pull. Door Buttons Chrome plated zinc. Black plastic knob. Catch Length PRK554DP...1-3/16" Elbow Catch Black plastic construction. SDG Catch Elbow Brass PR DP Dimension PRK1021DP...1-3/16" x 5/8" Door Catch Black plastic construction. Catch Size Stud Size PRK559DP...1-3/8" x 7/8"...1-1/8" x 3/8" Door Button Brass or chrome. Display pack. Overall Length: 1-3/4" - Hook length: 1-11/16" large side: 1-3/16". Small side: 1/2". SDG Door Button Chrome SDG Door Button Brass Door Button Stamped 304 stainless and injection molded nylon. Width Height Thickness SDG Door Button..1-3/8 x 1-1/4...3/4 SDG Door Button..1-3/8 x 1-1/4...3/4 DP PRK1216DP...1-3/4" Nylon Door Catch Molded nylon. Overall Diameter Width Length SDG /2"...1-3/16" Elbow Catch Chrome plated zinc. Stud Catches Solid brass construction. Sold per each. Length SDG /8" SDG /16" SDG /4" Display packs - Sold per pair. Dimension PRK1056DP...1-1/8" x 9/16" Length SDG /8" SDG /16" SDG /4" Stud Catches - Display pack Chrome construction. Sold per pair. Length SDG /8" SDG /16" SDG /4" Stud Catch Available in brass or chrome plated brass. 2 per display pack. Width Length Fin SDG / /16"..Chrome SDG /8" /16"..Chrome SDG /16"...2-5/16"...Chrome SDG / /16"..Brass SDG /8" /16...Brass SDG /16"...2-5/16"...Brass Chrome Elbow Catch Chrome plated brass. Display pack. SDG Catch SDG Catch Display Pack Flexible Door Catch Injection molded nylon, stamped 304 stainless. Spring clip gives ease of alignment. Comes with nickle plated brass adjustable door strike. Length SDG Door Catch Flexible..1-1/4" Pr Roller Catch Injection molded nylon, Display Pack Width Length SDG Roller Catch Surface 1-3/8" 1-3/16" SDG Roller Catch with Gussett 1-5/16 3/4"

20 466 Handles / Pulls Deluxe Handle -Display Pack Cast brass or with chrome fonish. Dimensions: Length: 6". Height: 1-1/16". ID length: 3-13/16". Screw to screw: 5". SDG Handle Deluxe Lift 6 Chrome DP SDG Handle Deluxe Lift 6 Brass DP Flush Ring Pull Chrome plated zinc alloy. Black plastic finishing flange. Spring loaded. Mount horizontal or vertical. Overall size: 3/4" x 3-1/4". PRK1221DP...Flush Ring Pull- Chrome Lift Handle Cast chrome plated brass. Display pack. Length SDG /4"...DP Flush Hatch Handle Stamped 304 stainless steel. Display pack. Spring loaded handle stays flush against base. Width Length SDG "...2-1/4" Chrome Lift Handle Cast chrome plated brass. Display pack. Length SDG /4" Hatch Handle Cast brass, chrome plated. Display pack. Length Height SDG Handle Hatch..2-15/16"...2-3/16" Perko Lifting Handle Length Inside Lgth. Finish PRK1231DP...6"...3-1/2"...Chrome/Zinc PRK775DP /4"...2-5/8"...Chrome/Bronze PRK775DP /4"...3-3/4"...Chrome/Bronze Delrin Flush Pull Available in black or white. 2-3/16" O.D. Depth Color SDG /8...Black SDG /8...White Surface Mount Lift Ring Stamped 304 stainless steel. Display pack. Size SDG /8" x 1-15/16" Locking Lift Ring Surface mount, stainless plate with die cast zinc lock. 2 arms provide for either flush or offset installation. Display packed. Plate Size SDG /8" x 1-15/16" Delrin Flush Pull Larger flush pull, white. Display pack. Size SDG /8" x 2-3/8"...DP Flush Lift Handle Stamped 304 stainless steel.- Display Pack Spring loaded lifting handle. Width Length SDG /16"...2-9/16"...DP SDG /2"...1-3/4"...DP Drawer Pull Chrome plated zinc alloy. Overall Width Inside Width PRK958DP...Drawer Pull...3-7/16"...2-5/16" Cast Ring Pull Investment cast 316 stainless steel. Display pack. Size SDG /16" x 9/16"

21 Lifting Handles / Ring Pulls 467 Perko Flush Lifting Pulls Chrome plated bronze. #8 screw size. Size PRK575DP...2-5/8" x 2" Hatch Handle Cast brass. Display pack. Length Height SDG Handle Htch..2-15/16"...2-3/16" Perko Flush Lifting Handles Plain bronze or chrome plated bronze. #8 screw size. Dimension Finish PRK776DP1...3" x 2-1/4"...Chrome PRK776DP /4" x 2-3/4"...Chrome Hatch Handle Cast brass with latch. Display pack. Length Height SDG Hatch Handle...3-1/8"..2-11/16" Perko Flush Lifting Handle Chrome plated zinc. #8 screw size. Dimension Inside Handle PRK1220DP...3" x 2-1/4"...1-7/8" x 1" Hatch Handle & Latch Investment cast 316 stainless. Display pack. Width Height Extended SDG Htch Hndle/Latch..3-3/4 x Perko Flush Ring Catch Chrome plated zinc with phosphor bronze spring. #6 screw size. Size PRK1051DP...2-1/4" x 1-3/8" Flush Lift Ring Chrome plated brass. Display pack. Size SDG " x 2-1/8" Perko Flush Ring Pull Chrome plated zinc. Perko Flush Ring Pull Chrome plated zinc. #6 screw size. Dimension Diameter PRK1232DP /8" PRK1232DP2...2" PRK841DP...1-3/4" x 1-3/8" Round Ring Pull Cast brass. Display pack. Diameter Depth SDG Ring Pull Rnd /16" Round Ring Pull Cast brass. Dimensions: OD: 2". Depth: 7/16". Front plate thickness: 1/16". Pull Ring height: 1-1/16". SDG Ring Pull Round Chrome 2 DP Ring Pull Brass or chrome plated brass. Display pack. Width Length Fin SDG /2"...1-3/4"...Chr. SDG /2"...1-3/4"...Br. SDG "...2-1/2"...Chr. SDG "...2-1/2"...Br.

22 468 Merit Door Stop & Holder 103 Cast brass or bronze. Universal double jointed hook. Stainless steel pins. Base diameter 1-3/4". Overall projection 3-3/4". Bumper diameter 1/2". Countersunk for #8 screws. MER103PB...Polished Brass Finish MER103PC...Polished Chrome Finish Cabin Door Hook Cast brass or bronze. Double-jointed. Base plates 7/8" x 1-1/2" - Countersunk for #8 screws. MER B...3 1/2" Polished Brass MER C...3 1/2" Polished Chrome MER PB...4" Polished Brass MER PC...4" Polished Chrome Door Stop & Holder 109 Cast brass or bronze. Base diameter 1 13/16". Double-jointed hook is reversible for either hand. Bumper diameter is 3/4". Overall projection 3-5/8". Countersunk for #8 screws. MER109PB...Polished Brass Finish MER109PC...Polished Chrome Finish Cabin Door Hook Sizes 6", 7" & 8" have base sizes 1-3/8" x 1-3/4". Countersunk for #8 screws. MER PB...6" Polished Brass MER PC...6" Polished Chrome MER PB...8" Polished Brass MER PC...8" Polished Chrome MER14381K6PB...Brass Keeper for 6" or 8" Door Bolt Cast brass. Sizes denote length of bolt. 4" countersunk for #6 screws. MER PB...4" Polished Brass Coat Hook Cast brass or bronze. 1-1/8" x 1-1/8". MER14610PB...Polished Brass MER14610SC...Satin Chrome Coat Hook Cast brass. 1-3/4" x 1-7/8". MER14529PB...Polished Brass Single Coat Hook Cast brass or bronze. 1-9/16" x 1-5/8". MER14626PB...Polished Brass MER14626PC...Polished Chrome Coat Hook Cast brass. 1-15/16" x 1-3/4". MER14791MPB...Polished Brass

23 Door Hooks 469 Perko Cabin Door Hooks Chrome plated zinc construction. #6 screw size. Hook Length PRK1199DP /4" PRK1199DP /4" PRK1199DP3CHR...3" PRK1199DP4...4" Door Hook Chrome plated brass. Display pack. Hook Length SDG Door Hook Chrome 2 SDG Door Hook Chrome 3 Perko Cabin Door Hooks Chrome plated zinc construction. #6 screw size. Hook Length PRK1287DP1...2" PRK1287DP /2" PRK1287DP3...3" Perko Cabin Door Latch Plain bronze or chrome plated bronze. #6 screw size. Hook Length Finish PRK956001PLB...1-1/2"...Bronze PRK956002PLB...2"...Bronze PRK956003PLB...2-1/2"...Bronze PRK956004PLB...3"...Bronze PRK956005PLB...3-1/2"...Bronze PRK956006PLB...4"...Bronze PRK956007PLB...5"...Bronze PRK956008PLB...6"...Bronze PRK956DP1CHR..1-1/2"...Chrome PRK956DP2CHR..2"...Chrome PRK956DP3CHR..2-1/2"...Chrome PRK956DP4CHR..3"...Chrome PRK956DP5CHR..3-1/2"...Chrome PRK956DP6CHR..4"...Chrome PRK956DP7CHR..5"...Chrome PRK956DP8CHR..6"...Chrome Door Hook Cast brass with chrome or brass finish. Dimensions: Overall length: 2-3/4". Height: 5/8". Hook length: 2". Catch opening: 11/16". SDG Door Hook Chrome 2-1/4 DP SDG Door Hook Chrome 3 DP SDG Door Hook Brass 3 DP SDG Door Hook Brass 3-1/4 DP SDG Door Hook Chrome 3-1/4 DP Door hook Machined 304 stainless steel. Display pack. Length SDG /8" SDG " SDG /16" Decorative Door Hook Cast brass. Display pack. Hook Length SDG Door Hook...1-1/2 Door Hook Cast brass. Display pack. Hook Length SDG Door Hook...2 Door Hook With Swivel Cast brass, chrome plated. Display pack. Hook Length SDG Door Hook Chome 4 Door Hook with Swivel Cast brass, chrome plated. Display pack. Length SDG Door Hook with Swivel....5"

24 470 Coat Hooks / Barrel Bolts Coat Hooks Chrome plated zinc. Accepts #6 screw. Projection Base Width PRK975DP1...2"...1-1/8" PRK975DP2...3"...1-1/4" Perko Barrel Bolt Chrome plated bronze construction. Overall Dimension PRK1053DP...2-5/8" x 1-1/4" Coat Hook Chrome plated zinc. Accepts #6 screw. Projection Base Width PRK610DP...1-3/8"...1-1/8" Coat Hook Chrome plated zinc. Accepts #6 screw. Projection Base Width PRK1106DP...3/4"...1" Barrel Bolts Chrome plated bronze construction. Supplied with black friction pad. Eliminates rattle & provides smooth operation. Rod Length Dimension Finish PRK947DP1CHR..2-3/4"...3-7/16" x 1-7/16"...Chrome PRK947DP2CHR..3"...4-5/16" x 1-7/16"...Chrome PRK947DP3CHR..4-1/4"...5-1/4" x 1-7/16"...Chrome Single Coat Hook - Large Cast brass or with chrome finish. 2 screw holes. Dimensions: Top width: 1". Height: 1-9/16". Extends: 1-3/4". SDG Hook Coat Single Chrome PR DP SDG Hook Coat Single Brass PR DP Barrel Bolts Chrome over brass construction. Length SDG /2" SDG " SDG /2" SDG " Double Coat Hooks Cast brass or with chrome finish. 2 screw holes. Dimensions: Top width: 7/8". Height: 1-7/8". Extends: 1-9/16". Bottom width (hook tip to tip): 2-11/16". SDG Hook Coat Double Chrome PR DP SDG Hook Coat Double Brass PR DP Chrome Barrel Bolt Extruded brass, chrome plated. Display pack. Length SDG /2" SDG " SDG /2" SDG " Cast Barrel Bolt Chrome plated brass. Display pack. Length SDG /8" Triple Coat Hook Cast brass. Chrome plated or brass. Display packed. Length Width SDG Hook Coat Triple Chr...4-5/8..1-7/16 SDG Hook Coat Triple Brss..4-5/8..1-7/16

25 Door Stops / Hatch Springs / Padlocks 471 Lift Spring - Gas Filled - Display Pack Unique multi-lobe seal. Hard chromium plated shafts. Bronze bushings & polymer end fittings. Pin to Pin Pin to Pin Length Extended Pressure Compress of Travel SDG Lift Spring Gas Filled # SDG Lift Spring Gas Filled # SDG Lift Spring Gas Filled # Perko Door Stop Chrome plated zinc with rubber bumper. Diameter Length PRK1177DP...1-1/4"...1" Perko Stop & Holder Chrome plated bronze with rubber bumper. Diameter Length PRK574DP /4"...2-3/8" PRK574DP /4"...3-1/4" Hatch Spring - Display Pack Formed & stamped 304 stainless. Internal wire prevents spring from over extension. Do not use where hatch scoops wind as boat moves. Flat Mount Spring Fastener End End Length Ctr to Ctr SDG Hatch Spring..1-1/ /8...3/4...DP SDG Hatch Spring..1-1/ /16..DP Hatch Support Braces Chrome plated brass. Length 12". PRK762002CHR...Hatch Support Braces 12...Pr Door Stop & Catch Cast 316 stainless steel. -1 is display packed Spring loaded latch holds door tight against rubber stop. Length SDG /2 SDG /2" SDG " Padlock Brass body. Display pack. BodyW BodyH Loop Hole SDG Padlock...2..x.1-7/16..5/16..1 Door Bumper Cast brass. Chrome plated or brass. Display pack. OD ID Depth SDG Door Bmper Chr...1-7/8"..13/16"..5/8" SDG Door Bmper Brs...1-7/8"..13/16"..5/8" Combination Padlock Stainless steel 2". Resettable code. Shackle is hardened S.S. Diameter 7.5mm ALC Padlock SS Combi 2 Drawer Knob Chrome plated brass. Stainless steel screw. Knob OD Panel Thickness PRK925DP...Knob Drawer /8" Combination Padlock Brass. Long shank. Resettable code. Shackle diameter 8mm. ALC Padlock Brass Long Combi Rim Latch Drawer Knob Polished brass. Display pack. Diameter Width SDG Drawer Knob...7/8"...3/4"

26 472 Hasps Swivel Hasps Chrome plated zinc. Accepts #6 screw. Padlock eye swivels to act as a latch. Length Width PRK1194DP...3"...1" Door Hasps Chrome plated zinc. Accepts #6 screw. Length Width PRK1198DP1...2"...1" PRK1198DP2...3"...1" PRK1198DP /4"...1" Hasps Chrome plated bronze construction. Accepts #6 screw. Length Width Finish PRK998DP1...2"...1"...Chrome Bronze PRK998DP2...3"...1"...Chrome Bronze Swivel Hasp Chrome or cast brass. Display pack. Width Height SDG Hasp Swivel Chrome SDG Hasp Swivel Brass Hasp Cast brass with chrome finish. Dimensions: Length (to hinge): 4-1/4". Height: 1-9/16". Catch height: 1-1/4". Catch hole dia: 1/2". Safety Hasp Stainless steel construction. SDG Hasp Heavy Duty Chrome DP Dimension SDG /8" long x 1" wide SDG " long x 1" wide Safety Hasp Cast brass. Display pack. Overall length: 3-1/2. Hook length: 2-3/8" SDG Hasp Safety Brass Hasp - Heavy Duty Cast brass. Display pack. Overall length: 4-1/4". Hook length: 3-1/4" SDG Hasp Heavy Duty Saftey Hasp - Dealer Pack Sand cast brass, chrome plated. Dimensions: Length (to hinge): 3". Height: 1". Catch height: 3/4". Catch hole dia: 1/4". SDG Hasp Safety 3 Chrome DP SDG Hasp Safety 3 Chrome DP SDG Hasp Safety 3 Brass DP Hasp Swivel Die cast zinc chrome plated. Flush or angle. Display pack. Width Hook Length SDG Hasp Swivel Flsh /8" SDG Hasp Swivel Angle /8" Heavy Duty Swivel Hasp Stamped 304 stainless steel. Length SDG /8"...DP Locking Hasp Stamped 304 stainless steel. Length SDG /8" Locking Hasp Stamped 304 stainless steel lock with 2 keys. Dimensions: Lock depth: 3/4". Overall width: 1-1/4". Hasp (section with lock) length: 4-1/8". Hasp (screw pad) length: 3-1/8". SDG Hasp SS Locking with Keys LG DP

27 Hinges 473 Semi-Concealed Hinge 3/8" inset. Accepts #6 fasteners. Size Material SDG /4" x 2-1/8"...Stainless Steel SDG /4" x 2-1/8"...Brass Take-Apart Hinge Brass construction. Accepts #10 fasteners. Length Width Side SDG "...2"...Left hand Perko Hinge Chrome plated zinc. Accepts #8 fasteners. Length Width PRK808DP...3"...1-1/2" Perko Hinge Chrome plated bronze. Accepts #8 fasteners. Length Width PRK951DP1...3"...1-1/2" PRK951DP2...4"...1-1/2" Take-Apart Hinge Stainless steel construction. Accepts #10 fasteners. Length Width Side SDG /4"...2"...Left Hand SDG /4"...2"...Right Hand Door Hinge Stainless steel construction. Accepts #10 fasteners. Length Width SDG "...1-1/2" SDG "...1-1/2" Door Hinge Stainless steel construction. Accepts #10 fasteners. Length Width SDG /4"...1-1/2" SDG "...1-1/2" Pull Apart Hinge Chrome plated bronze. Accepts #10 screw. Length Width Type PRK149DP...3-3/4"...2"...Left Hand PRK152DP...3-3/4"...2"...Right Hand Hinge Cast brass with chrome finish. Dimensions: Length: 4". Height: 2-3/8". Folded length: 2-1/2". SDG Hinge T 4 x 2 3/8 Chrome PR DP Hatch Hinge Stainless steel construction. Accepts #10 fasteners. length Width SDG /4"...3" Cuddy Hinge Stainless steel construction. Accepts #10 fasteners. Length Width SDG /4"...1-5/8"

28 474 Hinges Hinge Available in chrome plated bronze or chrome plated zinc. Accepts #8 fasteners. Length Width Finish PRK987DP /4"...3/4"...Chrome Bronze PRK1213DP...2-1/4"...3/4"...Chrome Zinc "T" Hinge Plain bronze or chrome plated bronze construction. Length Width "A" Dim. PRK197DP3...8"...3-7/8"...2" Hinge Available in chrome plated bronze or chrome plated zinc. Accepts #8 fasteners. 3/8" offset. Length Width Finish PRK988DP /4"...3/4"...Chrome Bronze PRK988DP /4"...3/4"...Chrome Bronze PRK1214DP...2-1/4"...3/4"...Chrome Zinc Butt Hinges Chrome plated zinc with removable pin. Sizes 2, 3, 4 have 4 screw holes. Sizes 5, 6, 7 have 6 screw holes. Height Width PRK1293DP /2"...1-1/2" PRK1293DP3...2"...1-1/2" PRK1293DP4...2"...2" PRK1293DP /2"...2" PRK1293DP /2"...2-1/2" PRK1293DP9...3"...3" Non-Mortised Hinge Plain brass or chrome plated brass construction. Height Width Closed PRK957DPCHR...3-3/8"...7/8" Hinge Chrome plated brass construction. Length Width PRK924DP...3"...1-1/2" Perko Hinge Chrome plated zinc construction. Dimension Type PRK942DP...1-1/2" x 1-1/2"...3/8" Offset Butt Hinges Heavy gauge chrome plated brass finish. Sizes 1, 2, 3 have 4 screw holes. Sizes 4, 5, 6, 9 have 6 screw holes. Height Width Pin Type PRK949DP1CHR..1-1/2"...1-1/4"...Fast PRK949DP2CHR..1-1/2"...1-1/2"...Fast PRK949DP3CHR..2"...1-1/2"...Fast PRK949DP4CHR..2"...2"...Fast PRK949DP5CHR..2-1/2"...2"...Fast Perko Hinge Chrome plated brass construction. Dimesnion Type PRK271DP...2-3/4" x 2-1/8"...3/8" Inset PRK272DP...2-3/4" x 2-1/8"...Flush PRK952DP1CHR..1-1/2"...1-1/4"...Removable PRK952DP2CHR..1-1/2"...1-1/2"...Removable PRK952DP3CHR..2"...1-1/2"...Removable PRK952DP4CHR..2"...2"...Removable PRK952DP5CHR..2-1/2"...2"...Removable PRK952DP6CHR..2-1/2"...2-1/2"...Removable PRK952DP9CHR..3"...3"...Removable

29 Hinges 475 Short Side Door Hinge Stamped 304 stainless. Display pack per pair. Short Plate Long Plate Height SDG Hinge ShrtSidDor..11/16"...1-5/16"...1-1/2" T-Hinge Cast brass. Display pack per pair. Open Width Height SDG Hinge T...4 x 2-3/8 Door Hinge Stamped 304 stainless. Display pack per pair. Open Width Height SDG Hinge Door.2-3/4" x 1-1/2" Hatch Hinge Investment cast 316 stainless steel. Open Width Height SDG Hinge Hatch /8 x 2-5/8 SDG Hinge Hatch /8 x 2-5/8 DP Butt Hinge Stamped 304 stainless. Display pack per pair. Open Width Height SDG Hinge Butt 1-1/ /2 SDG Hinge Butt 1-5/8...2 SDG Hinge Butt SDG Hinge Butt /2 Long Reach Hatch Hinge Investment cast 316 stainless steel. Open Width Height SDG Hinge Htch Lng Rch..3-1/2 x 2-7/8 SDG Hinge Htch Lng Rch..3-1/2 x 2-7/8 DP Hinge Strap Stamped 304 stainless steel. Open Width Height SDG Hinge Strap Hd...7-1/8 x 1-5/8 Ladder Hinge Investment cast 316 stainless steel. Display pack per pair. Open Width Height SDG Hinge Ladder /16 x 3/4 Round Side Hinge Flush Mount Stamped 304 stainless. Display pack per pair. Open Width Height SDG Flush Mnt Round Side..5-3/ /2 Hinge Strap Investment cast 316 stainless steel. Display pack per pair. Open Width Height SDG Hinge Strap...5-7/8 x 1-1/8 Hinge Injection molded fiberglass nylon - Black. OpenWidth Height SDG Hinge Strp...3-1/4 x 1-1/16 Pr DP Strap Hinge Stamped 304 stainless steel. Display pack/per pair. Width Length SDG /8"...4" Take-Apart Hinge Cast brass. Display pack. OpenWidth Height SDG Hinge Take-Apart 1-1/2 x 1-1/2 SDG Hinge Take-Apart 1-1/2 x 1-1/2 SDG Hinge Take-Apart 1-1/2 x 2 Short Side Hinge Stamped 304 stainless steel. Display pack/per pair. Short side is 11/16" by 1-1/2" wide. Length SDG /8"

30 476 Hinges Stamped Butt Hinge 304 stainless steel. Display packed per pair. Lenth Height SDG /8"...1-1/2" SDG "...2" Offset Butt Hinge Stamped 304 stainless steel. Display packed per pair. For surface mounting. 3/8" offset. Length Height SDG /2"...1-1/2" Stainless Butt Hinge Investment cast 316 stainless steel. Display packed per pair. Width Length SDG /2"...1-5/8" SDG "...2" Long Reach Hatch Hinge - Display Pack 316 investment cast stainless steel. Width Length SDG /8"...3-1/2"..DP Stainless Cuddy Hinge Stamped 304 stainless steel. Display packed per pair. Width Length SDG "...1-9/16" Long Side Door Hinge Stamped 304 stainless steel. Display packed per pair. Width Length SDG /4"...6" Stainless Door Hinge 316 investment cast stainless steel. Display pack. Width Length SDG /2"...3" SDG /2"...4-1/8" Safety Hasp Stamped 304 stainless. Display packed. Length SDG /16" SDG /16" Semi-Concealed Hinge Available in brass or stainless steel. Display packed per pair. Width Length SDG /2"...2-3/16"...SS SDG /2"...2-3/16"...Brass Swivel Hasp 304 stamped stainless. Display packed. Length SDG /16" Chrome Strap Hinge Cast brass, chrome plated hinge. Display packed per pair. Width Length SDG /16"...5-5/8" Flush 2 Pin Hinge Stamped 304 stainless steel. Display pack/per pair. Width Length SDG /16"...3-1/4" Stainless Door Hinge Stamped 304 stainless steel. Display pack/per pair. Width Length SDG "...2-7/8" Flush Door Hinge Stamped 304 stainless steel. Display pack/per pair. Width Length SDG /2"...2-7/8" Short Side Offset Hinge Stamped 304 stainless steel. Display pack/per pair. Mounting on front surface of a raised door has 3/8" offset has 3/4" offset. Width Length SDG /2"...2-3/4" SDG /2"...2-1/2"

31 Hinges 477 Strap Hinge Chrome plated bronze. Size is open width. Display pack. Door Hinge Injection molded fiberglass nylon. Size PRK120DP1...4" PRK120DP2...6" PRK120DP3...8" SDG Black, 3" x 1-3/8"... SDG Black, 3" x 1-3/8", D.P. Strap Hinge Sand cast brass, Chrome plated. Dimensions: Overall length: 3-7/8". Folded length: 1-15/16". Center height: 1-1/16". Metal thickness: 3/16". SDG Hinge Strap Chrome 4 PR DP Strap Hinge Stainless steel construction. Accepts #8 fasteners. Length Width SDG /8"...1-1/8" SDG /8"...1-1/8" SDG /8"...1-1/8" Butt Hinge Injection molded fiberglass nylon.. SDG Black, 1-1/2" x 1-3/8" Short Sided Door Hinge Injection molded fiberglass nylon. A B SDG Black, 2-1/4" x 1-3/8". SDG White, 2-1/4" x 1-3/8", D.P. Angle Bracket Stamped 304 stainless steel. Display pack. 3 x 3 sold per each. Size SDG /8" x 2-3/8" SDG " x 3" Butt Hinge Size 4"x 4". Chrome plated extruded brass. Extra heavy duty plastic bearings. Removable pin. PRK1004DPCHR..Hinge Butt Ch Rem Pin Table Bracket Stamped 304 stainless. Display pack. Wall H Wall W Table H TableW SDG Table Brckt.. 2-1/8 x 3-3/8-1-3/4 x 2-3/4 Piano Hinge Stainless steel - 6 foot. TACH140112A72..Hinge Piano SS 1-1/2 x 6 TACH140114A72..Hinge Piano SS 1-1/4 x 6 TACH140116A72..Hinge Piano SS 1-1/16 x 6 Piano Hinge Stainless steel. 2"x 6 ft. TACPHSS2...Hinge Piano SS

32 478 Cleats / Fender Ties Hex Head Cleat Galvanized hex head ship or dock cleat. Length Fastener Size SDG "...7/16" SDG "...1/2" SDG "...5/8" SDG "...3/4" SDG "...3/4" SDG "...7/8" Galvanized Cleat Galvanized flat head open base cleat. Length Fastener Size SDG /2"...#8 SDG "...#10 SDG "...#12 SDG "...1/4" SDG "...5/16" SDG "...3/8" SDG "...7/16" SDG "...1/2" Flat Head Cleat Galvanized flat head ship or dock cleat. Length Fastener Size SDG "...7/16" SDG "...1/2" SDG "...5/8" SDG "...3/4" SDG "...3/4" Hex Head Cleat Galvanized hex head open base cleats. Length Fastener Size SDG "...5/16" SDG "...3/8" SDG "...3/8" SDG "...1/2" Aluminum Cleats Plain aluminum open base cleat. Length Base Dim. Screw Size PRK530008ALU...8"...4" x 2 1/4"...1/2" PRK530010ALU...10"...4-1/2" x 3"...1/2" PRK530012ALU...12"...6-1/2" x 2 7/8"...5/8" PRK530015ALU...15"...7" x 3 1/4"...3/4" Bulwark Chock Set into each side of bulwark, bow or stern. Aluminum. 3-1/2 x 6-3/8. FBFBC2...Chock Bulwark Alum Cast Aluminum Cleat Plain cast aluminum. Length Base Size PRK545DP3...3"...1-1/2" x 5/8" PRK545DP4...4"...1-5/8" x 3/4" PRK545DP5...5"...2" x 7/8" PRK545DP6...6"...2-1/4" x 7/8" PRK545DP8...8"...2-5/8" x 1-1/8" PRK545010ALU...10"...3-5/8" x 1-1/2" PRK545012ALU...12"...4" x 1-1/2" Rosemount Fender Ties Aluminum. Base BAYB Rosemount Fender Tie 4 Round Rosemount Fender Ties Aluminum. Round O.D. Weight FBFTP25...Rosemount Fender Tie 3-5/8".25 Lb FBFTP40...Rosemount Fender Tie 5-1/4".50 Lb Fender Tie, Rosemount Aluminum. BAYB Rosemount Fender Tie 4 Square

33 Cleats 479 Stainless Steel Low Silhouette Cleat Stainless steel construction. Length Fastener Size SDG "...5/16" SDG "...1/2" Stainless Steel Cleat Stainless steel hollow base cleats. Length Fastener Size SDG "...1/4" SDG "...1/4" SDG "...5/16" Closed Base Cleat Chrome plated zinc construction. Length Dimension Screw Size PRK566DP3...3"...3-1/8" x 1-1/2"...#8 Cam Cleat Handy, durable. Adjustable orientation. Rope Fastner Spacing WCH Cam Cleat For 5/16...#8...1" WCH Cam Cleat For 15/32...# /2" Eye Strap for Cam Cleat Stainless steel. WCH Eye Strap For Cam Cleat WCH Eye Strap For Cam Cleat. Nylon Cleat Black nylon construction. Length Fastener Size SDG "...#6 SDG "...#8 SDG "...#10 SDG /2"...#12 SDG "...1/4" Clam Cleat Black nylon construction. Type Length Rope Size SDG Vert...3-3/4"...1/4" - 1/2" SDG Vert /16"...3/8" - 5/8" SDG Horiz /16"...1/4" - 3/8" Open Base SS Cleat Light type - polished finish stainless steel. Length Fastener Size BUC70COBS8XL 8"...1/4" BUC70COBS12L... 12"...5/16" Open Base Cleat Chrome plated zinc alloy, max rope size 5/16". Length 4", base dimensions 2-1/8" x 1-1/2", 2 per card. PRK1188DP4CHR...Cleat 4 Chrome Rail Mount Cleat Nylon construction. Fits 7/8" and 1" rail. Length SDG /2" Line Cleat Cast brass. Length Mount Extended SDG Cleat Line..2 1/ /2 Line Cleat Tenzalloy aluminum. Length Finish WIC /2"...Aluminum

34 480 Cleats Open Base Cleat 316 stainless steel - 4 hole cleat. Hollow base cleats, display packed. Low Profile Cleat 316 stainless steel - 4 hole pattern. SDG " SDG " SDG " SDG " SDG " SDG " SDG " SDG " Baywood Aluminum Cleat Cast marine grade aluminum Optional weld or bolt mounting. Not drilled Length Base Width Heigth BAYB-06...Cleat Alum BAYB-08...Cleat Alum BAYB-08S Cleat Slimline 8" BAYB-08W Cleat Wide Base 8" BAYB-10...Cleat Alum BAYB-10S Cleat Slimline 10" BAYB-10W Cleat Wide Base 10" BAYB-12...Cleat Alum BAYB-14...Cleat Alum BAYB-16...Cleat Alum Nylon Cleat Injection molded nylon. Open base - 2 hole cleat. Display pack. SDG ", pr SDG ", pr SDG ", pr SDG /2", ea SDG ", ea Deck Cleats Cast marine grade aluminum. Designed for bolt or weld on. Length FBFDC08S...Cleat Aluminum 8" - Slim Base FBFDC10...Cleat Aluminum 10" - Wide Base FBFDC12...Cleat Aluminum 12" - Wide Base FBFDC15LB...Cleat Aluminum 15" - Wide Base FBFDC18...Cleat Aluminum 18" - Wide Base Heavy Duty Nylon Cleat 2 hole heavy duty nylon cleat. Display pack. SDG /4" Black SDG /4" Black SDG /4" White SDG " Black Stud Mount Cleat Die cast zinc, chrome plated. Open base cleat. SDG " cleat Baywood Hawse Eye Cast marine grade aluminum. Can be welded or bolted on. BAYB /4" x 5" (2-piece) BAYB /4" x 5" with cleat BAYB " x 6" BAYB " x 6" BAYB Trim ring for B-223/224 BAYB Trim ring for B-220 Baywood Aluminum Chock Cast marine grade aluminum. Designed for bolt or weld on. Length BAYB " BAYB " BAYB "

35 Cleats 481 Mooring Bitt Chrome plated bronze. Hollow. Base Dimensions Height Bolt PRK Mooring Bitt 4-1/4 x 4-1/ /2"...1/4" Cleat - Closed Base Polished cast brass. Closed base. Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat...3-3/16"...13/16"...11/16"...1-1/8"...Pr SDG Cleat "...3/4" /16".Pr SDG Cleat /4"...1" /16" Heavy Duty Stud Mount Cleat White, injection molded nylon - Stud mount. Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat SS /16"...3-3/4"...4-5/16" Open Base Cleat Black, injection molded nylon. Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat Nylon 9-1/ /8"...3"...4-5/8" White injection molded nylon. Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat Nylon /8"...1-1/4...2" Nylon Cleat Open Base White. Injection molded nylon. Overall Height from Cleat - Folding Investment cast 316 stainless steel. Overall Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat...6-1/ / /16"...2-1/4"..DP Screw to Base Width Unfolded Screw Length SDG Fold Cleat 3-7/ / /4"...2-3/8"DP Open Base Cleat Die-cast zinc chrome plated. Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat / /2"...1-1/16"..DP Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat /16"...2-1/4"...1-3/16" Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat /16"...3-1/ /16"..DP Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG Cleat "...4" /16"..DP Aluminum Cleat Closed base. Die-cast aluminum, 2 hole. Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG CleatAlum /16"...1-1/16" /16" SDG CleatAlum / /2"...2-9/16" Open base - die cast aluminum, 2 hole Overall Height from Center Bolt to Base Height Deck Up Center Bolt length SDG CleatAlum / / /16 SDG CleatAlum / / /16 SDG CleatAlum / / /16

36 482 Pad Eyes Pad Eyes Forged 304 stainless steel. Display pack per pair. Dimensions: Length 1-9/16". Eye hole 1/2". SDG Pad Eyes SS 1/2" Pair SDG /8" SS Pad Eye Pair Seadog Pad Eyes Available in bronze or chrome over bronze finish. Counter sunk for #10 FH fasteners. Eye Dia. Finish SDG /16"...Bronze SDG /8"...Bronze SDG /16"...Chrome SDG /8"...Chrome Forged Pad Eye 304 Stainless steel. 2 per display pack. Chrome Pad Eye Die cast zinc, chrome plated. 5 per pack. SDG /8 SDG /16" SDG /8" Pad Eye Stamped 304 stainless steel. Sizes listed - height x hole centers. Display pack. SDG /16 x 1-1/8, 4 ea SDG /2 x 1-3/8, 4 ea SDG /4 x 1-3/4, 2 ea Bronze Pad Eye Forged bronze or chromed bronze. 2 per display pack. SDG /16" Bronze SDG /8" Bronze SDG /16" Chrome SDG /8" Chrome Eye Strap Forged bronze chrome plated. Size between hole centers listed. Display packs of 2. Nylon Fairlead Eye 3/8". Between holes 7/8". SDG /16" SDG " Stainless Eye Strap Stainless steel. Size between hole centers listed. Display packs of 2. SDG /16" SDG " Eye Strap Chrome plated zinc alloy. Length:1 7/8". ID Eye: 5/16". PRK562DP...Eye Strap SS 5/Bag SDG Black Black Nylon Pad Eye Display pack, 5 ea. SDG /8"

37 Eye Plates / Chocks 483 Eye Plates Stainless steel construction. Countersunk for 1/4" FH fasteners. Length Eye Dia. SDG "...3/4" x 7/16" SDG "... SDG "...1" x 5/8" Eye Plate - Oblong Investment cast 316 stainless steel. Dimensions: Eye hole 5/8", 3-1/2" length, 7/8" width. Diamond Eye Plate Stamped 304 stainless steel. Display pack. Eye Plate Swivel & Ring Stamped 304 stainless with ring. Display pack. Dimensions: 1-3/8"W x 1-3/16" L. Eye hole 1-1/8". SDG Eye Plate Swiv & Ring SS 2 Eye Plate With Ring Stamped 304 stainless. SDG Eye Plate Oblong 316 SS 3" SDG Eye Plate Oblong 316 SS 3-1/2" SDG /16" x 1-7/16" SDG /2" x 1-9/16" SDG /16" x 1-15/16" Ring ID Plate L Plate W SDG /4"...3-3/16" /16" Bow Chocks Investment cast 316 stainless steel. Display packed per pair. SDG " Seadog Stainless Steel Chock Stainless steel construction. Length Fastener Size SDG "...#10 SDG "...1/4" Seadog Stainless Steel Skene Chock Stainless steel construction. Length Fastener Size SDG /2"...#10 SDG "...1/4" Perko Straight Chock Chrome plated bronze. Length Max. Rope Size PRK119DP4CHR...4"...3/4" Perko Straight Chock Chrome plated zinc. Length Max. Rope Size PRK1230DP...4"...7/8" Oblong Eye Plate Stamped 304 stainless steel. Plate size listed. Display pack. SDG /16" x 1/2" SDG /16" x 3/4" SDG /16" x 1" Skene Bow Chocks Chrome plated zinc alloy. Length 4" x 7/8" width. Rope size: 3/4". Rub Strake Stamped 304 stainless steel. Display pack. PRK1223DP...Chock Bow Skene SDG Rub Strake 8 x 5 SDG Rub Strake 12 x 4-1/2

38 484 Hooks / Clips / "S" Hooks Ring Buoy Bracket Stamped 304 stainless steel. Display pack. SDG Bouy Bracket Release Pin AISI 304 stainless steel. 2 ea per display pack. Dia. Grip SDG /4"...7/16" SDG /4"...7/8" SDG /4"...1-1/2" SDG /4" /16" Pole Storage Clip Injection molded Rubber. 2 each per display pack. Size SDG /4" Lashing Hook - Display Pack Formed 304 stainless steel - 1/4" hole. Stock Dia Length SDG /16"...2-3/4" SDG /8"...3-1/2" Boat Hook Clip Stamped 304 stainless steel. 2 each per display pack. Size SDG /4" to 1" SDG " to 1-1/4" Galv S-Hook Mild steel, electrogalvanized. Display pack. Stock Dia. Length SDG /4"...2" SDG /16"...2-1/2" SDG /8"...3-1/16" Hammock Hook 304 stainless steel. Display packed per pair. Size SDG /2" SDG /8" S-Hook Steel electrogalvanized. Length Throat SDG S-Hook...3-1/ /16 Clip-Mate Holding Clip Perfect to store boat hooks, bilge pumps, oars, etc. Design provides permanent holding spring. B-Flex plastic is non corrosive. Size BECCM1...Clip Mate White Plastic 1 BECCM112...Clip Mate White Plastic 1-1/2 Reefing Hook Formed AISI 304 stainless steel. Stock Dia Hook L Eye Hole SDG Hook Reefing 5/ /2...1/2. SDG Hook Reefing 3/ /2...1/2. DP

39 Wichard Stainless Steel Snaps Snaps 485 Standard with Eye (Left picture, below) Safe wk. Size Dia. load/lbs. HYE # /4" HYE # /16"...2,650 HYE # /8"...2,750 HYE # /32"...3,970 Standard with Out Eye (Middle picture) Safe wk. Size Dia. load/lbs. HYE # /4" HYE # /16"...2,650 HYE # /8"...2,750 HYE # /32"...3,970 Asymetrical Snaps with Eye (Right picture) Safe wk. Size Dia. load/lbs. HYE # /4" HYE # /16"...2,650 HYE # /8"...2,750 HYE # /32"...3,970 HYE231 HYE233 HYE232 Stainless Steel, asymmetrical snaps. Overall Breaking Size Length Strength/lbs. SDG /4"...2-5/16"...1,160 SDG /16"...3-1/8"...2,300 SDG /8"...4"...3,600 SDG /16"...4-5/8"...6,600 Stainless Steel, asymmetrical with eye. Overall Breaking Size Length Strength/lbs. SDG /4"...2-3/8"...1,160 SDG /16"...3-1/8"...2,300 SDG /8"...4"...3,600 SDG /16"...4-3/4"...6,600 Stainless Steel, standard snap. Overall Breaking Size Length Strength/lbs. SDG /4"...2-3/8" SDG /16"...3-1/8"...1,700 SDG /8"...4"...2,600 SDG /16"...4-3/4"...4,400 Stainless Steel, standard snap, import. Overall Breaking Size Length Strength/lbs. SDG /4"...2-3/8" SDG /16"...3-1/8"...1,700 SDG /8" /16".2,600 SDG /16" /16"..4,400 Quick Links Available in stainless steel or galvanized. Stainless Steel specifications Jaw Overall Breaking Dia. Opening Length Strength/lbs. SDG /8"...3/16"...1-1/4"...2,420 SDG /16"...1/4" /16".4,950 SDG /4"...9/32"...2-1/4"...7,150 SDG /16"...3/8" /16".12,000 SDG /8"...7/16"...3-7/16"...16,000 SDG /2"...9/16"...4-1/8"...20,000 SDG /16"...5/8"...4-3/4"...34,100 SDG /8"...3/4"...5-1/2"...41,250 Galvanized specifications. Jaw Overall Breaking Dia. Opening Length Strength/lbs. SDG /8"...3/16"...1-7/16"...1,100 SDG /4"...9/32"...2-1/4"...4,400 SDG /16"...3/8" /16".10,000 SDG /8"...7/16"...3-1/2"...15,000 SDG /2"...9/16"...4-3/16"...18,000 Stainless Steel, snap with eye. Overall Breaking Size Length Strength/lbs. sdg /4"...2-3/8" SDG /16"...3-1/8"...1,400 SDG /8"...4"...2,000 SDG /16"...4-3/4"...2,500 Stainless Steel, snap with eye, import. Overall Breaking Size Length Strength/lbs. SDG /4"...2-3/8" SDG /16"...3-1/8"...1,400 SDG /8" /16".2,000 SDG /16"...4-3/4"...2,500 Galvanized, mild steel standard snap, import. Overall Breaking Size Length Strength/lbs. SDG /4"...2-3/8" SDG /16"...3-1/4"...1,140 SDG /8" /16".1,600 SDG /16"...4-3/4"...2,000 SDG /2"...5-1/2"...2,800 SDG /16"...6-3/16"...6,000

40 486 Snaps / Links Quick Link Long Style AISI 316 stainless steel. eak Stock Dia. Length Throat Hole Strength SDG Quik Link Long..3/ /16"...9/16"...9/16"...4,400 SDG Quik Link Long..1/ /4"...9/16"...5/8"...6,380 SDG Quik Link Long..5/ /2"...3/4"...3/4"...10,780 SDG Quik Link Long..3/ /8"...13/16"..13/16"...17,600 SDG Quik Link Long..1/ /8"...15/16"...1"...24,200 SDG Quik Link Long..9/ /16"...1-1/16"..1-1/8"...34,100 SDG Quik Link Long..5/ /4"...1-1/8"...1-3/16".44,000 Locking Asymmetrical Snap AISI 316 stainless steel with eye insert. Size Opening Break SDG /16"...1/2" lb SDG /8"...11/16" lb SDG /16"...15/16" lb Asymmetrical Snap AISI 316 stainless steel. Display packed. Size Opening Break SDG /4"...7/16" lb SDG /16"...9/16" lb SDG /8"...11/16" lb SDG /16"...15/16" lb Link Snap AISI 316 stainless steel. Break Width Length Throat Hole Strength SDG Snap Link...7/ /16"...3/4"...1-1/4"..5,390 Link Snap with Eye AISI 316 stainless steel. Break Width Length Throat Hole Strength SDG Snap Link Eye..5/ /16"...9/16"...1-1/16"..2,600 SDG Snap Link Eye..7/ /16"..11/16"..1-1/4"...5,390 Standard Snap Hook AISI 316 stainless steel. Use where strength is not the primary factor. Display packed. Size Break SDG /4" lb SDG /16" lb SDG /8" lb SDG /16" lb Asymmetrical Snap with Eye AISI 316 stainless steel. Display pack. Size Opening Break SDG /4"...7/16" lb SDG /16"...9/16" lb SDG /8"...11/16" lb SDG /16"...15/16" lb Stainless Snap Hook AISI 316 stainless steel. Made in Italy. Key lock system reduces snags, no sharp edges or points. "-1" are display packed. Size Opening Break SDG /4"...3/8" lb SDG /16"...7/16" lb SDG /8"...5/8" lb SDG /16"...11/16" lb SDG /2"...1-1/8" lb Standard Snap with Eye AISI 316 stainless snap hook. Display pack. Size Break SDG /4" lb SDG /16" lb SDG /8" lb SDG /16" lb

41 Snaps 487 Fast Eye Baby Snaps Bronze. Length Eye Std. Pack SDG /8"...3/8"...10 Seadog Fast Eye Boat Snap Bronze construction. Length Eye Dia. SDG /16"...3/8" SDG /8"...5/8" SDG "...3/4" SDG /8"...3/4" Fast Eye Boat Snap Bronze construction, display packed. Length Eye Dia. SDG /16"...3/8" SDG /8"...5/8" SDG "...3/4" Seadog Fast Eye Boat Snap Chrome construction. -1 is display pack. Length Eye Dia. SDG /8"...7/16" SDG /8"...11/16" SDG /16"...3/4" SDG /8"...3/4" SDG /8"...7/16" Boat Snap Swivel Eye Die cast zinc chrome plated. Display pack. Length Throat Eye Hole SDG SnapSwivel Eye Bolt..3 1/4"...1/2"...11/16" Bolt Snap Cast bronze, swivel eye. Length Opening Eye SDG /16"...5/16"...3/8" SDG /16"...5/16"...1/2" SDG /8"...3/8"...5/8" SDG /16"...3/8"...7/8" SDG /16"...9/16"...1-1/4" Seadog Bolt Snap Swivel Bronze construction. Length Eye I.D. SDG /16"...3/8" SDG /16"..1/2" SDG /8"...5/8" SDG /4"...3/4" SDG /16"...1" SDG /3"...1-1/8" SDG /4"...1-1/4" Snap Double End Zinc plated. Size CAM Snap Dbl End 4 162z CAM Snap Dbl End 4 5/8 163z Snap Bolt Round Eye Swivel eye. Nickel plated. Size CAM Snap Bolt Rnd Eye 3/8 CAM Snap Bolt Rnd Eye 5/8" CAM Snap Bolt Rnd Eye 1/4" CAM Snap Bolt Rnd Eye 3/8" Spring Hook Back Snap Mild steel electrogalvanized. Break Length Throat Hole Strength SDG Snp Sprg Bak...4-1/16"..1"...1/2"...1,200Lb SDG Snp Sprg Bak..4-1/16"...1"...1/2"...1,200Lb DP Quick Snap Round Eye Swivel eye. Bronze. Size CAM Snap Quick Rnd Eye 5/8

42 488 Snaps Fast Eye Baby Snap Die cast bronze. 1-13/16" long Display Pack. Baby Snap Manganese bronze. 2-1/16" long. 2 per display pack. Baby Bolt Snap Die cast bronze, 3" long Display Pack. Snap Bolt Round Swivel eye, bronze. Opening SDG /4"...Dp Baby Snap Fast Eye Sand cast brass. Display pack per pair. Length Throat Eye Hole SDG Snap Baby...3"...3/16"...3/8" SDG Swivel Snap SDG /16" Opening Size CAM Snap Bolt Rnd Eye 3/8 Bronze Swivel Eye Boat Snaps Bronze. Size Length Eye Pack SDG /4"...9/16"...10 SDG /8"...11/16"...10 SDG /8"...3/4"...10 Swivel Eye Boat Snap Cast bronze swivel eye snap. Display packed. Length SDG Size /4" SDG Size /4" SDG Size /8" Swivel Eye Boat Snap Cast bronze, 7/16" opening. Display Pack Length SDG /16"...DP Toggle Snap for Shackle Investment cast 3/16 stainless steel. Dimensions: Length: 2-11/16". Snap opening: 9/16". Pin dia: 1/4". Shackle opening: 9/16". SDG Toggle Snap Shackle 3-1/2 Safety Snap - Fast Eye Investment cast 316 stainless steel. Length Throat Eye Hole SDG Snap Fast Eye /16..5/8...3/4...DP SDG Snap Fast Eye /16..3/ /8" SDG Snap Fast Eye /16..3/ /8"...DP Swivel Eye Snap Shackle Investment cast 316 stainless steel. Desc SDG /16" long SDG /2" long Trigger Snap Cast manganese bronze. Display Pack SDG /16" Trigger Snap Sand cast brass. Display pack. Length Throat Eye Hole SDG Trigger Snap /16"...7/16"...12"

43 Snaps / Web 489 Spring Snap Investment cast 316 stainless steel. Display pack. Length Throat L-Eye Hole W-Eye Hole SDG Spring Snap..2-3/16"...1/4"...1-1/8"...5/16" Forged Utility Snap Electro galvanized. Display packed. Length Opening SDG /8"...11/16" Snap Strap Eye Bolt Snap Die cast zinc, nickel plated. Size Work Load CAM Snap Strp Eye Rigid Lb. CAM Snap Strp Eye Rigid 5/8" Utility Snap Cast nickel plated steel - Display pack. Length Opening SDG /16...1/2" Webbing Slide Stamped AISI stainless. Width Width Thickness Opening SDG Webbing Slide..2-1/2 x 1-1/4...1/16"...2" Heavy Duty Snap Forged Steel, electro galvanized. Display packed. Length Opening SDG /4"...11/16" Spring Gate Hook Investment cast 316 stainless snap hook. Display pack. Length Opening SDG "...7/16" SDG /4"...7/16" SDG /16".15/16" D-Ring AISI 304 stainless steel, bulk. Stock Dia ID-W ID-H SDG D-Ring...3/ / /16 SDG D-Ring...3/ / /2 SDG D-Ring...3/ /8...2 SDG D-Ring...1/4"...1-1/2"...1-5/16" SDG D-Ring...1/4"...2"...1-3/4" SDG D-Ring...1/ /8...2 SDG D-Ring...5/ /4 SDG D-Ring...5/ / /8 SDG D-Ring...5/ / /8 Offset Gate Snap Hook 316 stainless steel - Allows for larger opening of snap. Provides same features of tradional style snap. Size Opening Break SDG /16"...3/4" lb SDG /8"...7/8" lb SDG /16"...1-1/16" lb Ski Rope Snap Injection molded nylon. Display pack. Length Throat Hole SDG Snp Ski Rope..3-1/4"..5/8" /16"

44 490 Snaps Boat Snap Sand cast brass fast eye snap. Display packed. Size Length SDG /8" SDG /8" SDG /16" SDG /16" Fast Eye Snap Sand cast brass. Size Length Throat Eye Hole SDG Snap FE # /8"...1/4"...7/16" SDG Snap FE # /8"...5/16"...5/8" SDG Snap FE # /16"...1/2"...3/4" SDG Snap FE # /16"..9/16"..3/4" Swivel Eye Boat Snap Sand cast brass. Display packed. Size Length SDG /16" SDG /16" SDG /2" Bolt Snap - Stainless Investment cast 316 stainless steel. 5/16" opening, 3/16" eye. Display pack. Bull Nose Snap Stainless steel. Display pack. 1/2" opening, 1" eye. SDG /16" long SDG /2" long Bull Nose Snap Die-cast zinc chrome plated. Display pack. Length Throat Eye Hole SDG Snp Bul Nos..4 1/8"...9/16"...11/16" Snap Swivel Eye Sand cast brass. Display pack. 3-5/16" L. Eye hole 3/8", throat opening 7/16" SDG Snap Swivel Eye Bolt 5/8 Swivel Eye Snap Sand cast brass. Size Length Throat Eye Hole SDG Snap Sw Ey /16"...3/8"...5/8" SDG Snap Sw Ey /16"...1/2"...3/4" SDG Snap Sw Ey /2"...9/16"...3/4" Fast Eye Boat Snap Investment cast 316 stainless steel, fast eye. Display packed. Size Length SDG /16" SDG /8" SDG /16" SDG /16" Fast Eye Safety Snap Dealer Packed Die cast manganese bronze. Breaking strength 1, /4" L. Eye hole 1-1/8" with throat opening 13/16". SDG Snap Safety Fast Eye Bronze DP Bronze Safety Snap Fast eye - 1,300 lbs breaking strength. Length SDG /8" Swivel Eye - Bolt Snap 316 stainless steel. Display pack. Size Length SDG /16" SDG /8" SDG /8" Fast Eye Safety Snap Investment cast stainless steel. Desc SDG /16" (D.P.)

45 Deck Plate / Opening Ports 491 Beckson Screw-Out Deck Plate Provide access with out the use of tools. Watertight, lightweight, non-corroding & durable. Screw out plates provides unique features. Single start, non-jamming, extra strong. Self-cleaning buttress thread. 4" Deck Plate - Standard trim ring Outside diameter: 6-1/8". Inside diameter: 4". Hole cut 4-1/2". Color Center BECDP40B...Black...Smooth/Black BECDP40W...White...Smooth/White BECDP40BC...Black...Clear BECDP40WC...White...Clear 6" Deck Plate - Standard trim ring Outside diameter: 8-1/8". Inside diameter: 6". Hole cut 6-1/2". Color Center BECDP60B...Black...Smooth/Black BECDP60W...White...Smooth/White BECDP60BC...Black...Clear BECDP60WC...White...Clear BECDP62B...Black...Non-Skid/Black BECDP62W...White...Non-Skid/White 8" Deck Plate - Standard trim ring. Color BECDP80B...Black...Smooth/Black Beckson Self Drain Opening Ports Designed with drain molded on inside of the spigot. Promotes drainage without hassle of making angled cuts in hull for spigot or drains. Allows for thru-bolting that is impossible in windows where angled spigot extends below bolt holes. Self Drain Port 5 x 12 Inside hole size requires 5-1/2" x 12-1/2". Outside frame measures 7-3/4" x 14-5/8". Body Window BECPO512WC10...White...Clear BECPO512WS10...White...Smoked BECPO512BS10...Black...Smoked Self Drain Port 7 x 14 Inside hole size requires 7-1/2" x 14-3/8". Outside frame measures 9-3/4" x 16-3/4". Body Window BECPO714WC10...White...Clear Rain Drain for Opening Port Primarily for installation where cabin sides have excessive angles & ports would collect rain & spray. These ports can drain while tipped up to 45. Rain Drain Port 5 x 12 Inside hole size requires 5-1/2" x 12-1/2". Outside frame measures 7-3/4" x 14-5/8". Body Window BECPO512DWC20...White...Clear Pry-Out Deck Plates - Beckson Watertight, lightweight, non-corroding & durable. Designed with an extra heavy O-ring to assure a water tight fit. 6" Deck Plate - Standard Trim Ring Outside diameter: 8-1/8". Inside diameter: 6". Hole cut 6-1/2". Color Center BECDP61B...Black...Smooth/Black BECDP61W...White...Smooth/White 8" Deck Plate - Standard Trim Ring Outside diameter:10". Inside diameter: 7-5/8". Hole cut 8-3/8". Color Center BECDP83B...Black...Non-Skid/Black BECDP83W...White...Non-Skid/White Rain Drain for Non-Opening Port Rain Drain Port 4 x 14 Inside hole size requires 4-1/2" x 14-1/2"; Outside frame measures 6-3/4" x 16-3/4". Body Window BECPO414DWS20...White...Smoked Rain Drain Port 7 x 14 Inside hole size requires 7-1/2" x 14-3/8". Outside frame measures 9-3/4" x 16-3/4". Body Window BECPO714DWC20...White...Clear

46 492 Hatches / Deck Plates Rectangular Hatches - White Clean design. Non-skid diamond pattern. 1/2" closed height. Opens full 180. Weather tight seal. One hand operation. Mounts vertical or horizontal. Invisible fasteners, nothing to snag lines. BECHT1024W...Hatch 10 x 24 White BECHT1115I...Hatch 11 x 15 Ivory BECHT1115W...Hatch 11 x 15 White BECHT1424I...Hatch 14 x 24 Ivory BECHT1424W...Hatch 14 x 24 White BECHT1515W...Hatch 15 x 15 White BECHT1821W...Hatch 18 x 21 White Low Profile Molded Hatches Molded low profile hatch. Color: Black. Quick action dogs, collet arm. Floated smoke acrylic lens. Inside/Outside opening. Complete with trim ring, screen. I D CUT OUT O D 16-5/16" x 16-6/16" /8" x 16-7/8" /8' x 18-7/8" BOM Hatch with Trim/Screen: Inspection Hatch Molded low profile hatch. White. T - handle easy operation, fully gasketed. Stainless steel hinge pins, non-skid surface. Flush mounting. UV resistant material. I D CUT OUT O D BOM8711W... Hatch 7" x /16" x 12-3/16" /4' x 14-1/4" I D CUT OUT O D BOM8812W... Hatch 8-1/2 x11-3/8-10-3/4" x 12-15/16" -12-1/2' x 15 1/2" I D CUT OUT O D 19-1/4" x 19-1/4" /4"" x 19-3/4" /8" x 19-7/8" BOM Hatch Comp/Pkg Smoke: Hatch Cover Pull Stamped 304 stainless steel. Display pack. Length SDG /16" 10" Deck Plate White, UV stabilized resin. Non-skid locking center. "O" Ring seal. Locking "T" style handle. ID Od Cut Out PYH844...Deck Plate Locking.5-3/ /16"...6-3/8" Screw Out Deck Plate Injection molded white ABS. Dimensions: Ring OD: 6-1/8". Ring height: 6-3/4". Cap OD: 5". Cap height: 5-1/2". SDG Deck Plate 5 Screw Out White DP 8" Deckplate Non-skid locking center. Color: stark white O-ring seal. O D I D CUT OUT BOM840W...Deck Plate /16"...7-5/16"...8-1/2" Deck Plate Investment cast 316 stainless. Display pack. Cap Dia. OD SDG Deck Plate 3-1/ /16 SDG Deck Plate 4-3/ /16 Regular Deck Plate Cast bronze. Plain standard. Complete with key. I.D. O.D. Screw Weight Stock# Opening Overall Size PRK526003PLB / Lb. PRK526004PLB / /8 Lb. PRK526005PLB / /4 Lb. PRK526006PLB /8...1/ /2 Lb.

47 Deck Plates / Hawse Pipe 493 Pry-Out Deck Plates Black dimpled surface. Extra heavy O-ring for watertight fit. Non-skid with smooth surface per installation requirements. Do not use in areas where internal pressure changes. OD Hole Cut Passage BECDP83B...Deck Plate 8"...8-1/2"...7-5/8" Pry-Out Deck Plates White dimpled surface. Extra heavy O-ring for watertight fit. Non-skid with smooth surface per installation requirements. Do not use use in areas where internal pressure changes. OD Hole Cut Passage BECDP83W...Deck Plate 10"...8-3/8"...8" Rope and Chain Deck Plate Chrome plated forged bronze. Cover with hook for hanging chain. Stainless steel cable retainer. Opening Diameter Overall Chain Size Flange Height PRK750DP...3/8"...5-1/4" x 4"...1 3/8" Deck Pipe Investment cast 316 stainless. Length Width SDG Deck Pipe Hinged..5-5/8"...4-1/16" Chain Deck Pipe Chrome plated brass construction. Length Width SDG /8"...4-1/2" SDG Replacement Cap & Chain Screw Out Deck Plate Injection molded ABS, black. Internal collar. OD ID Hole Cut SDG Deck Plate w/collar..5-3/4"...5"...5-1/2" Chain Deck Pipe Hinged chrome plated brass deck pipe. Mount plate is 3-1/8" in diameter. Display pack. Center Hole SDG /2" Screw-Out Deck Plates Access without use of tools. Black/Clear Single start non-jamming buttress thread, self-cleaning. Self-aligning center & gasket assures watertight seal Clear cover permits view of controls, etc. & easy inspection. OD Hole Cut Passage BECDP80BC...Deck Plate 8"...8-1/2"...7-5/8" Hawse Pipe Cast 316 stainless steel. Display pack. Hole size of 1-1/2" x 3-11/16". Width Length SDG /2"...5-1/2" Screw-Out Deck Plates Access without use of tools. White. Single start non-jamming buttress thread, self-cleaning. Self-aligning center & gasket assures watertight seal. OD Hole Cut Passage BECDP80W...Deck Plate 8"...8 1/2"...7 5/8"...Ea Hawse Pipe Investment cast 316 stainless steel. Larger hawse measures 2-7/8" x 6-7/8" inside. Width Length SDG /16"...9-1/4"

48 494 Drain Plugs / AirCraft Cable Garboard Drain Plug Bronze plug - cast bronze flange. Pipe size 3/4" - thread neck length 3/4" - OD 1-3/4". PRK363DPPLB...Plug Drain Garboard Plain Brnz Stainless Drain Plug Snap handle drain plug. Display pack. Size SDG " Garboard Drain Plug Bronze plug, cast bronze flange. Zinc plated steel wrench. Pipe size 1". Thread neck length 1". OD 3-1/8". PRK124000PLB...Plug Drain Garboard PRK A...Wrench Only Garboard Drain Plug Cast bronze plug. Pipe size 3/4". Thread neck length 5/8". OD 2-3/8". PRK266DP...Plug Drain Garboard Snap Handle Drain Plug Stamped brass. "-1" Display pack. Size SDG " SDG " SDG " with chain SDG /4" Baitwell Plug Stamped brass & neoprene. Display packed per pair. Size SDG /8" SDG /2" SDG /8" SDG /4" SDG /8" Garboard Drain Machined bronze, 1/2" NPT. Display pack. Stock# Size SDG " SDG Plug Only Drain Tube Formed Brass tube.- Display Pack I.D. Length SDG "...1-7/8"...DP SDG "...2-3/8"...DP SDG "...2-7/8"...DP AirCraft Cable Stainless steel cable. YAC1/8-7x7..Cable AirCraft..SS Cable Vinyl Coated Vinyl coated is more resistant to abrasion/weathering. High strength, galvanized. Const.Type Size ReelFT. Work Load CAM Vinyl Coated Cable 7x7...1/8 x CAM Vinyl Coated Cable 7x19..3/16 x CAM Vinyl Coated Cable 7x19..1/4 x Cable Clamp Chrome plated. For 3/16" wire. SDG Zinc Clamp SS Wire, 041 Wire Stainless steel,.041 or lb. roll. AVI041...SS Wire AVI032...SS Wire

49 Flag Pole Sockets / Canvas 495 Upright Flag Pole Socket Chrome plated bronze construction. Inside Dia. Base Dia. Type PRK220DP1...3/4"...2"...Bow PRK220DP /4"...2-3/8...Bow PRK221DP1...3/4"...2"...Stern PRK221DP2...1"...2-3/8"...Stern Flush Flag Pole Sockets Chrome plated bronze construction. Inside Dia. Flange Dia. Type PRK218DP1...3/4"...2"...Bow PRK218DP2...1"...2-3/8"...Bow PRK218DP /4"...2-5/8"...Bow PRK219DP1...3/4"...2"...Stern PRK219DP2...1"...2-3/8"...Stern PRK219DP /4"...2-5/8"...Stern Clamp-On Flag Socket Chrome plated zinc with black plastic knob. Inside Dia. Rail Size PRK1302DP...3/4"...1/2" - 1" Chrome Flag Staff Chrome plated brass tube with chrome plated zinc base. Base has o-ring for secure fit. Base Dia. Length PRK495DP1...1/2"...14" PRK495DP2...3/4"...14" PRK495DP3...3/4"...18" Canvas Stud Nickle plated brass. With washers SDG Canvas Stud 2 Prong 4/Set SDG Canvas Stud Eyelet Type 4/Set Boat Cover Sockets Chrome plated zinc. Length Size Opening Width PRK578DP...3-1/4"...1-7/8" x 7/16"...5/8" Canvas Snap Stud Nickle plated brass. Size length Type SDG Cnvs Snp Stud # 8 x 3/8...Sht Metal SDG Cnvs Snp Stud # 8 x 3/8...Sht Metal..6/Set SDG Cnvs Snp Stud # 8 x 5/8...Sht Metal SDG Cnvs Snp Stud # 8 x 5/8...Sht Metal..6/Set SDG Cnvs Snp Stud #10 x 32...Machine SDG Cnvs Snp Stud #10 x 32...Machine..5/Set SDG Cnvs Snp Stud..1/4 Post...Standard...6/Set. Curtain Fasteners PRK994 PRK995 PRK99700 Projection PRK994...Curtain Fastener PRK996...Curtain Fasteners Eyelet PRK99700NKL...Curtain Washer Nickle Turnbuckle Snap Nickle plated brass. 2 per display pack. SDG Snp Turnbuckle 2 Screw Base SDG Snp Turnbuckle 2 Prong Clinch & Backplate SDG Snp Turnbuckle Eyelet & Washer SDG Snp Turnbuckle #7 & Brss Wood Screw 5/8

50 496 Baier Hatches History Industry standard since 1947, Baier invented & patented the first flush hatch. Original supplier to military & first to receive American Bureau of Shipping (ABS) & all U.S. Coast Guard certification. Baier hatches used on all types of fishing boats, tugs, barges, work boats, & other marine vessels in both military & private sectors. Army Corps of Engineers, & Canadian Department of Transport. Unique design All Baier Hatches use patented Strongback system of securing hatch cover to deck. Superior to other more complicated hatch closure systems because: SIMPLE. 2 moving parts. Simplicity equals safety at sea. STRONG. Closure system is rugged & stonger than others WATERTIGHT All these features add up to LOW MAINTENANCE. Quality Materials Only hatch available in STEEL (versus iron). Steel is more durable than iron. Steel hatches have up to 300% greater impact resistance, energy absorption, & ductility versus iron hatches (especially at low temperatures). Wide Product Line Flush hatch line available in: Cast aluminum & cast heat-treated galvanized steel. Special order bronze is also available. Quick opening, positive locking hatches available in: Round Oval Lift-out Hinged Coaming configurations. Baier is the only manufacturer of Spanner Hatches. Baier's Exclusive Steel Hatch Only manufacturer of quality cast steel flush hatches. Round & oval lift out & hinged flush hatches are available in: Cast steel alloy that is heat-treated for ultimate strength Hot-dip galvanized for corrosion resistance. Steel is More Durable Than Iron Up to 300% greater impact resistance, energy absorption, & ductility versus iron (especially at low temperatures). Steel hatches can take considerably more abuse. King Crabbers: Originally designed for King Crab fishing vessels operating in cold Alaskan climate. No other hatch is better suited for this purpose than Baier because of its superior strength in frozen operating conditions. Steel hatches for vehicle traffic areas of ferries & other uses requiring unparalleled strength, deflection, & load regulations. Aluminum hatches can be replaced with Baier Steel Hatches where greater strength is required. The benefit is obvious - a steel hatch will last a lifetime. Baier Spare Parts Size BAIG24...Gasket...22" & 24" BAIG24X24...Gasket...24" x 24" Sq BAIG2015X24...Gasket...15" x 24" & 20" BAIG18...Gasket...18" BAIG16...Gasket...16" BAIG14...Gasket...14" BAIG8...Gasket...8" BAISB15X24Al...Strongback aluminum...15" x 24" BAISB15X24ALT.Strongbacl alum T-handle...15" x 24" BAISB15X24...Strongback steel...15" x 24" BAISB24AL...Strongback aluminum tri-arc.24" BAISB20TAL...Strongbacl F/ T-handle alum..20" BAISB20AL...Strongback aluminum...20" BAISB20...Strongback steel...20" BAISB18AL...Strongback aluminum...18" BAISB18...Strongback steel...18" BAISB16AL...Strongback aluminum...16" BAISB16...Strongback steel...16" BAISB14AL...Strongback aluminum...14" BAISB14...Strongback steel...14" BAICBSS...Center bolt - stainless steel BAIW...Wrench - galvanized BAIWN...Washer for center bolt - neoprene BAISSW...Washer for centerbolt - stainless steel BAICB...Cross bar

51 Baier Hatches 497 Baier Lift-out Flush Hatches Use a patented Strongback system of securing hatch cover to deck. Superior to complicated hatch closure systems because it is simple (two moving parts), stronger, & more reliably watertight. Easily serviced (parts are readily available & field replaceable). The Baier model hatch cover product line is available in: Cast aluminum & cast steel (Stronger, more durable & impact resistant compared to iron hatches, especially in cold climes). Each hatch has an underside escape turning bar for safety. Turning wheel is optional. Deck Ring available in: Galvanized mild steel (for welding into steel decks), Cast aluminum (welding into aluminum decks or bolting to fiberglass or wood decks). Detachable Hex T-handle: Quick operation, & can be stored separate from the hatch for security. All hatches are measured by clear opening thru hatch. Standard equipment on fishboats, tugs, barges, work boats, marine vessels, & many U.S. Navy & U.S. Coast Guard vessels. 24" Round Hatch Clear Cover Deck Cover Ring Opening Diameter Cut-Out BAISC24...Steel...Steel...24"...26" /16" BAIACSR24...Alum...Steel...24"...26" /16 20" Round Hatch Clear Cover Deck Cover Ring Opening Diameter Cut-Out BAISC20...Steel...Steel...20"...22" /16" BAIAC20...Alum....Alum....20"...22" /16" BAIACSR20...Alum....Steel...20"...22" /16" 18" Round Hatch Clear Cover Deck Cover Ring Opening Diameter Cut-Out BAISC18...Steel...Steel...18"...20" /16" BAIAC18...Alum....Alum....18"...20" /16" BAIACSR18...Alum....Steel...18"...20" /16" Round Hatches Most popular Baier Flush Hatch. Round, flush-mounted, quick release. Lift-out hatch with grab handles. Standard round sizes are: 24", 20", 18", 16" and 14" (clear opening diameter). Cross bar 16" Round Hatch Clear Cover Deck Cover Ring Opening Diameter Cut-Out BAISC16...Steel...Steel...16"...18" /16" BAIAC16...Alum....Alum....16"...18" /16" BAIACSR16...Alum....Steel...16"...18" /16" Strongback Center bolt 14" Round Hatch Clear Cover Deck Cover Ring Opening Diameter Cut-Out BAISC14...Steel...Steel...14"...16" /16" BAIAC14...Alum....Alum....14"...16" /16" BAIACSR14...Alum....Steel...14"...16" /16" 8" Round Hatch Cover Ring Opening Diameter Cut-Out BAIACSR08...Alum....Steel...8"...10" /16 Hatches are Identified by Clear Opening. When ordering please specify: Cover Material: Cast aluminum or cast steel. Ring Material: Cast aluminum or galvanized steel Oval Lift-Out Flush Hatch with Grab Handles Used where beam spacing does not permit use of a round cover. Standard oval sizes: 15" x 24" & 13 1/2" x 20 1/2" (clear opening dimensions). Oval Hatch 15" x 24" Clear Deck Cover Ring Opening Cut-Out BAISC15X24...Steel....Steel...15" x 24"... 17" x 26" BAIAC15X24...Alum....Alum....15" x 24"... 17" x 26" BAIACSR15X24...Alum....Steel...15" x 24"... 17" x 26"

52 498 Baier Hatches Round/Oval Hinged Flush Hatch Hinged hatches are flush-mounted, designed for quick release with a grab handle. Hinges are recessed, no tripping. Used as a crawl-through openings on deck or door on a wall. Standard sizes are 22" round 15" x 24" & 13-1/2" x 20-1/2" oval (clear opening dimensions). Oval Hinged Hatch 15" x 24" Cover Ring Clear Opening Deck Cut-Out BAIASH15X24...Alum...Steel...15" x 24"...17" x 26" BAIACH15X24T...Alum...Alum...15" x 24"...T Handle Oval Hinged Hatch 13-1/2" x 20-1/2" Cover Ring Clear Opening Deck Cut-Out BAIHACSR135...Alum....Steel /2" x 20-1/2" /2" x 22-1/2" Available by Special Order...22" Round Hinged Hatch Lift-Out Flush Hatch - w/ Built-In T-Handle Flush hatch with built-in T-handle available in: 20" round & 15" x 24" oval shapes. 15" x 24" Oval With T-Handle Cover Ring Clear Opening Cover Diameter Deck Cut-Out BAIAC15X24T...Alum....Alum....15" x 24"...17" x 26-1/2" 17-1/2" x 26-1/2" BAIACSR15X24T.Alum....Steel...15" x 24"...17" x 26-1/2" 17-1/2" x 26-1/2" 20" Round With T-Handle Clear Cover Deck Cover Ring Opening Diameter Cut-Out BAIAC20T...Alum....Alum....20"...22" /16" BAIACSR20...Alum....Steel...20"...22" /16" Round/Oval Spanner Flush Hatches Exclusive manufacturer of Spanner flush hatch in round & oval shapes. Spanner hatch has no grab handle cavity. Cover is smooth. Specially suited where safety, security, & cleanliness are priorities. Shrimp & Fish Boats-product does not catch in cover cavities makes loading & cleaning much easier. Passenger Vessels-designed where a smooth walking surface is required for safety of passengers. Limited Security Access - Most difficult to access w/out grab handles & lift-out key wrench. Lift-key wrench inserts into centerbolt key way, procedure is quick & easy. Standard Sizes: Round: 20", 18", 16", 14" and 8". Round With T-Handle Clear Opening Cover Diameter Deck Cut-Out 20"...22"...Tech Drawing Available 18"...20"...Tech Drawing Available 16"...18"...Tech Drawing Available 14"...16"...Tech Drawing Available 6 5/8"...8"...Tech Drawing Available BAIAC8 (aluminum)

53 Baywood Hatches 499 Baywood Aluminum Hatches Designed & engineered for needs of the boating & fishing industry. Hatches are made of marine grade aluminum & stainless steel for extra strength. Hatches are measured by clear hatch opening. Size Type BAYB BAYB Hatch Alum 14x24 Q Rel No Ring Hatch Alum 22x22 Qr N/Ring Flush Bolt Down Hatches Provide an economical hatch for occassional access. Stainless steel socket head bolts are machined to permit threading bolt through cover, prevents accidental loss. Stainless steel helicoils installed in hatch rings to receive stainless steel bolts. Type Size BAYB-189 Hatch Alum 8 Bolt Style BAYB-116 Hatch Alum 12 Round Bolt Style BAYB-67 Hatch Alum 14x24 Bolt Pattern BAYB-061 BAYB-067 Quick Opening Inspection Hatch Hatches provide quick access with minimum depth below deck.. Assembled with no moving parts below deck. Stainless steel actuating handles & shafts with cam on one end to apply sealing action. Stainless steel wear plates are cast in the ring to prevent excessive wear. Type Size BAYB-144 Hatch 8 Quick Opening Alum Baywood Parts Gaskets and other repalacement parts for Baywood hatches. Type Size BAYB Gasket For B-111 Hatch BAYB-116G Gasket For Hatch #B-116 BAYB Gasket For Hatch B-145 BAYB-145F Inner Arm For B145 Hatch BAYB Gasket For Hatch B-146 BAYB-149MF Fasteners Kit B-145 B-149 BAYB Gasket For B-150 Hatch 22x22 BAYB Gasket For B-151 Hatch BAYB Gasket For B-154 BAYB Gasket For B-189 BAYB-38G Gasket 3/8 Round Solid BAYB-403 Bushing Shaft BAYB-405 Handle For Hatch Long BAYB-410 Center Hub Square BAYB-411 Inner Arm For Hatch Qo BAYB-413 Seal Center Bolt For Hatch BAYB-414 Oil Seal Centr Bolt F/M BAYB-415 Outer Arm For B-145 B-149 Dog BAYB-416 Outer Arm B-146 B-154 St Steel BAYB-417 Repair Kit B-145 B-149 BAYB-419 Spider Plus For Hatch BAYB-420 Tower For B-145 B-149 Hatch BAYB-421 Wear Plate B-145 SS BAYB-422 Shaft For Shaft

54 500 Bow Rollers / Folding Steps Bow Roller Stainless frame with 2-1/2" roller wheel. Max line size of 1". Length SDG /4" SDG Replacement Wheel Bow Roller 304 stainless steel frame with 2-1/2" roller wheel. 1" maximum rope size. Length SDG " Bow Roller - SeaHook Style 304 stainless steel frame with 2 1/2 " roller wheel. Handles up to 1" rope. Length SDG /2" SDG Repl. Wheel Anchor Pulley Corrosion resistant die-cast aluminum. Locks automatically with weight of anchor. Flick of rope releases tension. Roller extends over gunwale, prevents scratches. Platform Bow Roller Roller wheel: 3-3/8" wide x 3" dia. Maximum line size of 1-1/2" DNC Anchor Pulley Bow Chock with Roller Aluminum with roller. Precision roller for heavier anchors. Keeps rope centered over bow, no scratches. Corrosion resistant cast aluminum. DNC Chock Bow Alum Length SDG /8" Bow Roller Investment cast 316 stainless OALength RollerWidth Rope Dia SDG Bow Roller...7-7/8"...1-7/8"...1" Folding Step Chrome plated manganese bronze. Stainless steel spring holds step in open/close position. Dimensions: Step: 4-1/8" x 2-1/4" Bracket: 4-1/4" x 1-3/4". Projection folded: 1 3/8". PRK344DPCHR...Folding Step Chr/Br Folding Step Investment cast 316 stainless. Display pack. Mount Mount Step Step Width Length Width Length Unfolded SDG Folding Step..4-3/8"..1-7/8" /16"...3-7/16" Step Handle Molded nylon. White or black. Display pack. Length Color SDG /8"...Black SDG /8"...White Bow Roller Anchor lift & lock. Electrogalvanized steel. 3/8" max rope diameter. Length Width Roller Dia SDG Bow Roller..6-13/16"..13/16"..1-7/8" SDG Bow Roller..6-13/16"..13/16"..1-7/8" DP Wood Rail Hinge 316 stainless steel. I D BUC70WRLHS1...W R Hinge...1-1/8" x 2-11/16" Wood Rail Lock 316 stainless steel. I D BUC70WRLLS1...W R Lock...1-1/8" x 2-11/16" Deck Step Stamped 304 stainless & molded rubber construction. Width Length SDG /4"...8-3/8" SDG /8"...8-7/8"

55 Vents 501 Louver Ventilators Chrome plated brass. Size Louver Length PRK33406ADP...11" x 2-1/2"...3" Size Louver Length PRK335DP3...3" x 3..."...2" PRK335DP /2" x 3"...2" PRK335DP9A...11" x 3-1/2"...3" Chrome plated brass. Size Louver Length PRK336004CHR...3-1/4" x 3"...2" PRK336DP4A...4-3/8" x 4"...3" PRK336DP /2" x 3"...2" PRK336DP5A...5-3/8" x 4"...3" PRK336DP /4" x 3"...2" PRK336DP6A...6-3/8" x 4"...3 Louver Vent Injection molded ABS, white. 6 louvres. Display pack. Dimensions SDG Vent White..4-7/8" x 5-1/2" Stainless Steel Louvered Vents Stainless steel construction. Width Height Fastener SDG "...2-5/8"...#6RH SDG "...4-5/8"...#6RH SDG /8"...4-5/8"...#6RH SDG "...9"...#6RH Louvered Vent Injection molded ABS. Colors: Black or White. Bulk. Width Length Color SDG /8" /2"...Blk SDG /8" /2"...Wht Oval Transom/Locker Ventilator Chrome plated zinc alloy. Anodized aluminum expanded mesh screen. 6" length x 2" width. PRK1271DP0CHR...Vent Oval Transom Locker ABS Louvered Vent ABS construction. Width Height Fastener SDG /8"...4-7/8"...#8RH SDG /8"...3-7/8"...#8RH Locker Ventilator Chrome plated zinc alloy. Length 8-3/8" x 2-1/4" width. Perko Locker Ventilator Chrome plated brass. PRK1238DPCHR..Vent Rectangle O.D. PRK330DP /2" PRK330DP /4" Stainless Steel Slotted Ventilators Stainless steel construction. Louvers Length Width Fastener SDG "...4-3/8"...#6RH SDG /4"...4-3/8"...#6RH SDG /4"...4-3/8"...#6RH Slotted 5 Louver Vent Injection molded ABS vent. Bulk. Width Length Color SDG /4" /4"...Wht SDG /4" /4"...Blk

56 502 Vents Perko Cowl Ventilator Chrome plated zinc. 3" duct threads into neck. Hose clamps not required. Mouth Length Width Height Opening Overall Overall Overall PRK1312DP...7 sq. in /4"...4"...2-3/4" Butterfly Vent - Side Knob Stamped 304 stainless steel. Bulk Dia. SDG " SDG " Beckson Vent-O-Mate Ventilators Complete vent with plastic cover. Draft free, water tight, & no obstruction below deck. Hole Size O.D. Construction BECC6...4"...8"...High Impact Plastic Midget Vent Stamped stainless. Display pack. A B SDG /8"...1-3/4" SDG /4"...2-1/8" BECC6 Stainless Steel Midget Vents Stainless steel construction. Length Width Height Fastener SDG /8"...1-3/4"...1/2"...#6RH SDG /4"...2-1/8"...5/8"...#6RH Clam Shell Ventilators Chrome plated brass. Base Height Width Dimension Opening Opening PRK315DP /8" x 1-1/2"...7/16"...7/8" PRK315DP2...2" x 2"...9/16"...1-1/8" PRK339DP...4" x 3-3/4"...1-5/8"...2-1/2" Clam Shell Ventilators Stainless steel construction. Length Width Height SDG /4"...5-3/4"...2-1/4" SDG /2"...6-7/8"...2-7/8" Flush Vent Injection molded white ABS. Display pack. Vent Dia Hose Hole Ctr to Ctr SDG Vent Flush..3-3/ / /16 Vent-O-Mate Ventilators Vacuum-formed white ABS air scoops with a white KORAD cap - prevents cracking/discoloring. Dimensions BECC4A Vent Cowl White 4 x 4.5 x 1.25 Vent-O-Mate Ventilators Vacuum-formed white ABS air scoops with white KORAD cap to prevent cracking or discoloring. Dimensions BECC1...CowlVent White 6.25 x 7 x 3

57 Fender Hooks, Ties and Holders 503 Fender Hook Sand cast brass, chrome plated. Dimensions: Top width: 1-1/4". Extends: 1-5/16". Opening: 7/16". Fender Hook Cast brass, chrome plated. 5/16" opening. SDG Hook Fender for 3/8 SDG Chromed Fender Hook Perko Fender Hook Chrome plated zinc. For 3/8" diameter rope. PRK1246DP...Plate Size 1-3/4" x 1-1/4" Perko Fender Lock Chrome plated zinc. Eye permanently attached to fender line. Quick & easy installation. Two per package. PRK1299DP...Flange Diameter 1-1/2" Fender ClamCleat Injected molded nylon. Hang fenders etc. Cleat permanently attached to rope. Line Size SDG Clamcleat Fender 1/4"- 1/2" DP Fender Tie Square, aluminum. Outside dimension: 6.63 x 6.38 depth BAYB-85...Eye Aluminum Fender Ties Fender Mate Injection Molded Nylon brackets. Clamp securely onto either 7/8" or 1" rail. Locking cam for fender line. Display packed per pair Line size SDG /4" - 5/16" Fender Tender II Unbreakable plastic. Clip on fenders instantly. Will not rust, corrode, stain, or scratch boat. DAV393...Fender Tender II True Fit Fender Holder - Polyform Modular design fits rails from 7/8" to 1-1/4". Any angle or height & allows a mix and match of sizes. Available as kit or individual. Parallel Connector Pair Use with fender holder. Black, sturdy. POLTFR170...Fender Holder For 6 Fenders POLTFR Fender Kit 2 Holder 6 Fenders POLTFR Fender Kit 3 Holder 6 Fenders POLTFR230...Fender Holder For 8 Fenders POLTFR Fender Kit 2 Holder 8 Fender POLTFR Fender Kit 3 Holder 8 Fenders POLTFR280...Fender Holder For 10 Fenders POLTFR Fender Kit 2 Holder 10 Fender POLTFR Fender Kit 3 Holder 10 Fenders POLTFR360...Fender Holder For 12 Fenders POLTFR403...Parallel Connector Pair Snap Type Fender Hook Chrome plated zinc alloy. Max rope size 1/4". Dimensions: 1-9/16" x 1-3/8". Snap type hook. 2/CD. PRK1309DPCHR..Fender Hook Snap Type Utility Hook Chrome plated zinc. Length 15/16" x 1/2" width. PRK1249DPCHR..Utility Hooks...5/Card Swivel Connector - Polyform Use with fender holder - Black sturdy. POLTFR402...Swivel Connector 7/8-1 Rails POLTFR404...Swivel Connector 1-1/4 Rails

58 504 Anodes - Zinc and Aluminum Martyr Commercial Zinc Anodes. Our alloys basic ingredient is high-grade zinc %+ pure. Zinc anodes meet/exceed requirements of specs for United States & Canada. Commercial Propeller Nut Anode Most propeller shafts are partially insulated from other parts of the vessel. Relatively high-resistant electrical path isolates the propeller from anodes attached to stern bearing, hull, or rudder. Attached to propeller at its axis & revolves with it. Stud hole & stud are not provided. Weight I.D. O.D. Depth Lbs. CMCPNA CMCPNB "...3.0"...3.0" CMCPN " " " CMCPN " "...4.0" CMCPN " "...4.0" CMCPN " "...4.5" CMCPN " "...5.0" CMCPN " "...5.5" CMCPN "...6.0"...6.0" CMCPN " " " CMCPN " " " CMCPN " "...7.0" CMCPN " " " Martyr II Commercial Aluminum Anodes Anodes use an aluminum alloy that meets the highest standards for commercial applications. Contains no mercury or other environmentally harmful elements. Provides 52% more life than zinc anodes in the same cathodic protection system. 42% the weight of zinc anodes, yet features: higher operating potential, & higher ampere-hour-per-pound efficiency under variable conditions. Save on installation & maintenance costs because: (1) They last 52% longer - a savings of one-third. (2) Fewer, larger alum anodes (same weight as zinc) substantial savings in installation & replacement costs provides same protection. Less costly to ship. Commercial Hull Anodes Bar & plate anodes are used to protect the hull & other large areas of medium & large vessels. Weight Material Installation Length Width Depth Lbs. Type Method CMCZHC "...6.0" " Martyr Zinc...Bolt-on CMCZHS "...6.0" " Martyr Zinc...Weld-on Steel Tabs CMCAZHC "...6.0" " Martyr II Alum...Weld-on Steel Tabs CMCZSS "...3.0" " Martyr Zinc...Weld-on Steel Tabs CMCAZSS "...3.0" " Martyr II Alum...Weld-on Steel Tabs CMCAZ "...3.5"...1.0" Martyr II Alum...Weld-on Steel Tabs CMCZ "...2.5"...1.0" Martyr Zinc...Weld-on Steel Tabs CMCAZ "...2.5"...1.0" Martyr II Alum...Weld-on Steel tabs CMCAZHN "...6.0"...1/2"...N/D...Martyr II Alum...Bolt-on Plate CMCZHN "...6.0"...1/2" Martyr Zinc...Bolt-on Plate Commercial Teardrop Anodes Teardrop anodes are available in "bolt-on" style. Steel tabs are provided. Weight Material Installation Length Width Depth Lbs. Type Method CMCAZTS-P...9.0"...3.0" " Martyr II Alum...Weld-on Steel Tabs with Pigtail CMCAZTSA...9.0"...3.0" " Martyr II Alum...Weld-on Alum Tabs CMCAZTS...9.0"...3.0" " Martyr II Alum...Weld-on Steel Tabs CMCZTS...9.0"...3.0" " Martyr Zinc...Weld-on Steel Tabs CMCZTSA...9.0"...3.0" " Martyr Zinc...Weld-on Alum Tabs CMCZTSP "...3.0" " Martyr Zinc...Weld-on Steel Tabs with Pigtail

59 Walter Keel Cooler Anodes Provide max protection to fresh water cooling system. Protects heat exchanger from salt water galvanic corrosion. Model Dim. A Dim. B CMCZ-1...Z /8"...2-3/4" CMCZ-2...Z /4"...3-1/4" CMCZ-3...Z /8"...3-1/2" CMCX X /4"...N/A CMCX X /4"...N/A CMCX58...X /8"...N/A Anodes - Zinc and Aluminum Rudder Anodes 2 anodes - for mounting on each side of the rudder. Zincs supplied with socket cap screws. Dim. A Dim. B CMCR /8"...1/4" CMCR /16"...1/2" CMCR /4"...1/2" CMCR4...5"...5/8" CMCR /8"...7/8" CMCR /2"...7/8" 505 X-45 X-58 Ball Driver Unique ball allen head design that enables convenient access to fasteners located on shaft & rudder anodes. CMCSDL...Screwdriver For Zinc LG 3/16 CMCSDS...Screwdriver For Zinc SM 5/32 X-47 Z-1 Marine Engine Anodes Martyr CME series consist of a brass plug with anode attached. Meets or exceeds specs. of anodes supplied as original equipment. Dia. C Anode Thread Dim. A Dim. B N.P.T. U.N.C. CMCC00...2"...1/4"...1/8"...1/4" CMCC /4"...3/8"...1/4"...5/16" CMCC1H CMCC1...2"...1/2"...3/8"...3/8" CMCC2...2"...5/8"...1/2"...7/16" CMCC3...2"...3/4"...3/4"...1/2" CMCC /8"...3/4"...3/4"...1/2" CMCC /8"...3/4"...3/4"...1/2" Spare Anode Only. Anode Thread Dim. A Dim. B U.N.C. CMCA00...2"...1/4"...1/4" CMCA /4"...3/8"...5/16" CMCA1H CMCA1...2"...1/2"...3/8" CMCA2...2"...5/8"...7/16" CMCA3...2"...3/4"...1/2" CMCA /8"...3/4"...1/2" CMCA /8"...3/4"...1/2" Engine Anode Plug Only Brass plug only. CMCAP0...Br Plug 0 1/8NPT 1/4NC CMCAP00...Br Plug 00 1/4NPT 5/16NC CMCAP1...Br Plug 1 3/8NPT 3/8NC CMCAP2...Br Plug 2 1/2NPT 7/16NC CMCAP345...Br Plug 3-5 3/4NPT 1/2NC Martyr Anodes. Streamlined hull anodes with wire. Size Length Width Thickness Weight CMCZPW-M...M...4-1/ / / lbs. CMCZPW-N...N / lbs CMCZPW-O...O / lbs. CMCZPW-P...P / lbs. Shaft Anodes - Streamed Lined Martyr shaft anodes clamp to the shaft with socket cap screws. Streamlined shaft anodes. Stock# Shaft Outside Length CMCSL1...3/4"...2-1/8"...2-1/8" CMCSL2...7/ / /8 CMCSL / /8 CMCSL / / /8 CMCSL / / /2 CMCSL / / /2 CMCSL / / /2 CMCSL / / /8 CMCSL / /8 CMCSL / / /4 CMCSL / / /4 CMCSL / / /8 CMCSL13...3"...5"...4" Shaft Anodes - Low Clearance Martyr shaft anodes clamp to the shaft with socket cap screws. Streamlined shaft anodes. Stock# Shaft Outside Length CMCLC1...3/4"...2-1/8"...1" CMCLC2...7/ /8...1 CMCLC /2...1 CMCLC / / /4 CMCLC / /4 CMCLC / /4 CMCLC / / /8 CMCLC / /8 CMCLC9A...2-1/ / /8 CMCLC / /2 CMCLC /2 CMCLC / / /2

60 506 Anodes - Zinc Canada Metal Outdrive Anodes Direct replacement components for outdrives of Mercury, Volvo, & OMC engines. Meets or exceeds specs. of anodes supplied as original equipment. Volvo Outdrive Anodes. Dim. A Dim. B Dim C Weight (lbs) CMCV /2"...3/8"...2-1/4" CMCV /4"...1-3/8"...2-3/8" CMC N/A...N/A...N/A CMC /8"...7/8"...5-3/4"...2 CMC /4"...1"...3-3/8" CMC /8"...1-3/8"...3-3/8" OMC Outdrive Anodes. Weight CMCO CMC CMC CMC367 CMC CMC CMCCV17 CMCV18 CMC CMC CMC Hull Anode w/holes Zinc - hole size 1/2 x 3/4". Lengt Heigth Width Hole to Hole CMCZHC2...Zinc Anode...5-3/4" x 2-1/2...3/4"...2-3/4" Mercury Outdrive Anodes. CMC CMCM CMCM CMC Weight (lbs) Divers Dream Specially designed anode with 2-oblong slots for mounting to studs. Size Material CMCDD...1/2" x 6" x 12"...Martyr Zinc CMC31640 CMCM127 CMC55989 Mini Divers Dream Anode Zinc. 6"L x 4"W, 2.25 Lbs. CMCMDD...Mini Divers CMDiver min Tear Drop Anode Zinc. Bolt-On. 4"L Lb. CMCZ12...Zinc Anode Oval with Holes Hamilton Jet Anode Zinc. CMCHJ Lbs CMCHJ Rnd Hamilton Jet CMCHJ Hamilton Jet CMCHJ103359

61 Anodes - Zinc, Aluminum and Magnesium 507 Alpha I Aluminum Anode Kit Aluminum lb. CMCALPHAKITA..Alum Anode Kit Alpha I Gen II Tear Drop Anode Zinc lb. 3-1/2 L x 1-3/4 W CMCCMT-20...Zinc Tear Drop 3 1/2 Zinc. 1 lb 5-1/4 L x 2 W CMCCMT-21...Zinc Tear Drop 5 1/4 Bravo I Aluminum Anode Kit Aluminum lb. CMCBRAVO1KITA...Alum Anode Kit Bravo I Streamlined Anode w/hole Zinc lb 9-1/4" L x 3-3/8" W. CMCCMZ404...Zinc Streamlined W/ Hole Bravo23 Aluminum Anode Kit Aluminum lb. CMCBRAVO23KIT....Alum Anode Kit Bravo II & III Grouper Hanging Anode Zinc lb 8-1/2" L x 3-1/4" W - Cable 15 ft. CMCGROUPER...Zinc Hanging Grouper CMCGROUPERM Magnesium Hanging Grouper Mercury/Mercruiser Anode Zinc. 0.5 lb. CMC Zinc Merc Heat Exchange Anode Zinc. 0.8 lb. Bolt-On. CMCH2B2...Zinc Anode Heat Exch 2 D Mercury/Mercruiser Anode Zinc lb. CMC Zinc Merc Hamilton Jet Anode Zinc lb. CMCHJ Zinc Hamilton Jet CMCHJ Zinc Hamilton Jet Mercury/Mercruiser Anode Zinc lb. CMC Zinc Merc Mercury/Mercruiser Anode Zinc lb. CMC Zinc Merc Cm821629cz Aluminum Tab Anode 1.3 lb - Weld-On. 5"L x 2.5"W x 1"D. CMCAZ6A...Anode 5 x 2.5 x 1 Alum Tab

62 508 Anodes - Zinc Volvo Anode Zinc lb. CMC Zinc Volvo Nissan/Tohatsu Anode Zinc lb. CMC3C Zinc Nissan Toh Mercury/Mercruiser Anode Zinc lb. CMC Zinc Merc Complete Unit Prop Nut Zinc nut. Complete unit Shaft Thread Length CMCPNCA...Prop Nut...3/4...1/ /2 CMCPNCB...Prop Nut...7/8...5/ /8 CMCPNCC...Prop Nut /4...3 CMCPNCD...Prop Nut...1-1/4...7/8...3 CMCPNCE...Prop Nut...1-3/ /2 CMCPNCF...Prop Nut...1-1/ / /2 CMCPNCG...Prop Nut...1-3/ / /8 CMCPNCH...Prop Nut /2...4 Mercury/Mercruiser Anode Zinc lb. CMC Zinc Merc Suzuki Anode Zinc lb. CMC D00..Zinc Suzuki Replacement Prop Nut Only Zinc. Fasteners included with all replace prop nuts. CMCPNSZA... A Prop Spare CMCPNSZB... B Prop Spare CMCPNSZC... C Prop Spare CMCPNSZD... D Prop Spare CMCPNSZE... E Prop Spare CMCPNSZF... F Prop Spare CMCPNSZG... G Prop Spare CMCPNSZH... H Prop Spare Mercury / Mercruiser Anode Zinc lb. CMC Zinc Merc Streamline Anodes Zinc. Length Width Lbs CMCM24...Zinc Streamline 4-3/4 x 2" CMCM25...Zinc Streamline 9-1/4 x 3-3/8" CMCM30...Zinc Streamline 6-1/4 x 2-3/4" Suzuki Anode Zinc.0.28 lb. CMC Zinc Suzuki Volvo Anode Zinc. 2.4 lb. CMC Zinc Volvo

63 AWAB Hose Clamps and Exhuast Clamps Stainless Steel Hose Clamps Features: Rolled band edges eliminate damage to hose. Joining of band to housing creates least deviation from circular shape as clamp is tightened. Stamped extra wide threads of band leave it smooth on inside. Properly pitched band & screw threads keep the clamp immune to vibration back-off. Band Width = 31/64". Minimum Maximum Range Diameter Diameter US (mm) (Inches) (Inches) Size PMC /16"...3/4...#4 PMC /2...7/8...#6 PMC / /16...#8 PMC / /16...#10 PMC / /16...#12 PMC / /8...#16 PMC / /8...#20 PMC / /6...#24 PMC / /8...#28 PMC /16...#32 PMC / /8...#36 PMC / /4...#40 PMC / /2...#44 PMC #52 PMC / /16...#64 PMC #72 PMC #104 PMC #112 PMC #128 PMC #138 PMC # Stainless Steel Mini-Clamps Especially suitable for smaller sizes of plastic & rubber hose. Unbroken band with rounded edges. Band is folded over to retain nut, & with small screw-thread pitch, gives the clamp self-locking properties. Band Width = 23/64". Minimum Diameter Maximum Diameter (mm) (Inches) (Inches) PMC / /64 PMC /32...3/8 PMC / /32 PMC / /64 PMC / /64 PMC / /32 PMC /32...9/16 PMC / /64 PMC / /64 PMC / /16 Flexible Screwdriver Reach & tighten awkwardly situated screws from angle of 90 with no slipping. Size PMCFCD...9/32" 7mm Exhaust Clamps U-Bolt Style Clamp Size AMF46250Z 2-1/2" AMF46300Z 3" AMF46350Z 3-1/2" AMF46400Z...4" AMF46450Z 4-1/2" AMF46500Z 5" AMF46550Z...5-1/2" AMF46600Z 6" AMF46700Z...7" AMF46800Z 8" REL268 5"

64 510 Hose Clamps and Band-It Worm Gear Hose Clamps Stainless steel band & housing. Package quatity /16" (8mm) Hex slotted screw. 9/16" (14mm) band width inch (.6mm) band thickness. Range Size (Dia. in Inches) BANV202...#2...7/32-5/8 BANV203...#3...5/16-7/8 BANV006...#6...3/8-7/8 BANV008...#8...7/16-1 BANV010...#10...1/2-1-1/8 BANV012...#12...1/2-1-1/4 BANV016...#16...3/4-1-1/2 BANV020...#20...7/8-1-3/4 BANV024...# /8-2 BANV028...# /8-2-1/4 BANV032...# /8-2-1/2 BANV036...# /8-2-3/4 BANV040...# /8-3 BANV044...# /16-3-1/4 BANV048...# /8-3-3/4 BANV052...# /8-3-3/4 BANV056...# /8-4 BANV064...# /2-4-1/2 BANV072...# BANV080...# /2-5-1/2 BANV088...# /8-6 BANV104...# /8-7 Band-It Band - Stainless Steel Industry standard, fully rounded edges and easy installation. Use type 201 for high strength & corrosion resistance. Size BANC203...Type 201 SS Band...3/8 BANC204...Type 201 SS Band...1/2 BANC205...Type 201 SS Band...5/8 BANC206...Type 201 SS Band...3/4 The Band-It Tool Drop forged electroplated with built-in cutter. Tool tensions over 2,400 lbs. BANC001...Band-It Tool Band-It Buckles - Stainless Steel Accomodates single & double wrap clamps. Unique teeth & ears provide max clamping strength. Size BANC254...SS Buckle...1/2 BANC255...SS Buckle...5/8 BANC256...SS Buckle...3/4 Hose Clamp Chicklet Protects hose clamp end. Plastic. PMC Red Tail Tip 100/Pk Chicklet PMC125015P...Red Tail Tip 25/Pk Chicklet

65 Top Fittings 511 Grab Rail - Center Post Hollow for 1" OD tubing. Chrome plated bronze. Height 3-3/8. OD Base1-1/2. PRK380A00CHR...Grab Rail Center Post Brz Stainless Rail Base Fitting 316 investment cast stainless. Available for 7/8" or 1" tubing. Size Angle Base O.D. SDG /8" /4 SDG " /4" SDG /8" /8" SDG /8" /8" SDG " /4" SDG /8" /8" SDG " /4" Tiller Rope Guide Chrome plated zinc alloy. Base length 1-1/4" x 3/4" width. Hole size: 5/16". 2 per card. PRK1261DP...Rope Guide Tiller Wire Rope Clamp Dia. Rope Size Finish PRK1226DP...1/8"-3/16"...Chrome/Bronze Top Cap Injection molded nylon. 2 per display pack. For 7/8" tube, hole for 1/4" pin. Color SDG Black SDG White Top Cap Molded nylon. For 3/4" tube, hole for 1/4" pin. Dsiplay packed per pair. Color SDG Black SDG White Tiller Rope Spring Electrogalvanized steel Length 5", compressed length 6". SDG Tiller Rope spring 4" Jaw Slide Injection molded nylon. 2 per display pack. For Tube Color SDG /8"...Black SDG /8"...White SDG /4"...Black SDG /4"...White Top Insert Injection molded nylon in black or white. 2 per display pack. For Tube Color SDG /4"...Black SDG /4"...White SDG /8"...Black SDG /8"...White Deck Hinge Black molded nylon. 3/16" pin size, base length 2-7/16". Width Desc SDG /16"...Straight..DP per/pair SDG /8"...Angled...DP per/pair