Bulletin 1492 Programmable Controller Wiring Systems Overview. Digital Interface Modules (IFMs) Feed-Through

Size: px

Start display at page:

Download "Bulletin 1492 Programmable Controller Wiring Systems Overview. Digital Interface Modules (IFMs) Feed-Through"

Ralf Dean
5 years ago
Views:

Bulletin Overview Digital Interface Modules (IFMs) Feed-Through Feed-through IFMs

package. Feed-through Standard For -point: Cat. No.

1 Bulletin Overview Digital Interface Modules (IFMs) Feed-Through Feed-through IFMs provided the same capability as normal terminal blocks, but in a more condensed package. Feed-through Standard For -point: Cat. No. -IFMF For -point: Cat. No. -IFMF Feed-through Extra Terminal Products For -point: Cat. No. -IFMF- For -point: Cat. No. -IFMF- Feed-Through Narrow Cat. No.-IFMFN Feed-through Sensor Terminal Products For -point: Cat. No. -IFMF- For -point: Cat. No. -IFMF- Safety Integrity Level (SIL ) Cat. No. -TIFMF-F- -

Bulletin Overview Digital Interface Modules (IFMs) Fusible Fusible modules provide a convenient method of adding overcurrent protections into your programmable controller wiring.

The V, V, and V blown fuse indicators reduce the troubleshooting time to locate and replace a blown fuse on the IFM.

Removal of fuses from the standard fuse holder is aided by fuse pullers (fuses not provided).

2 Bulletin Overview Digital Interface Modules (IFMs) Fusible Fusible modules provide a convenient method of adding overcurrent protections into your programmable controller wiring. These modules have x fuse holders on-board and are available with and without blown fuse indication. The V, V, and V blown fuse indicators reduce the troubleshooting time to locate and replace a blown fuse on the IFM. Fusible modules have an easy-to-remove, transparent plexiglass cover that prevents objects from contacting fuse circuitry under normal operation. Removal of fuses from the standard fuse holder is aided by fuse pullers (fuses not provided). The fusible modules also have two or four terminals per I/O point to create a power bus for input and output load connections. Fusible modules are available in both isolated (Cat. No. -IFMF-FS-) and nonisolated (Cat. No.- IFMF-F-) versions. There are a select number of fusible IFMs available for input modules.provided). The fusible modules also have two or four terminals per I/O point to create a power bus for input and output load connections. Fusible modules are available in both isolated (Cat. No. -IFMF-FS-) and nonisolated (Cat. No.-IFMF-F-) versions. There are a select number of fusible IFMs available for input modules. Fused Extra Terminals For -point: Cat. No. -IFMFS-F-, -IFMFS-FA-, -IFMFS-F- For -point: Cat. No. -IFMFS-F-, -IFMFS-FA-, -IFMFS-F-, -IFMFS-FA-, -IFMFS-F-, -IFMF-FSA- Fused Extra Terminals For -point: Cat. No. -IFMF-F-,-IFMF-F-, -IFMF-FA-, -IFMF-F-, -IFMF-FA-, -IFMF-F-, -IFMFS-F -, -IFMFS-F-, -IFMFS-FA- For -point: Cat. No. -IFMF-F-, -IFMF-F-, -IFMF-F-, -IFMFS-F-, -IFMFS-F-, -IFMFS-F-, -IFMFS-F-, -IFMFS-FA-, -IFMFS-F-, -IFMFS-FA-, -IFMFS-F- -pin cable connector Isolated Fusible module (no fuse blown indication): Cat. No. -IFMF-FS- -pin cable connector Isolated Fusible module with V blown fuse indication: Cat. No. -IFMF-FSA- Safety Integrity Level (SIL) Cat. No. -TIFMF-FA- -

3 Bulletin Bulletin ControlLogix Modules Digital IFMs and Cables for Bulletin ControlLogix -point Isolated and -point I/O Modules [V]... per I/O -IAI -IBD -IBI -IA Bulletin ControlLogix I/O Module Feed-through Standard -IFMF -RIFMF -RTB Y Y Y Z Z Z Y Y Y Y Y Y Z Z Y Y Y Extra Terminals -IFMF- -RIFMF- -RTB Y Z Z Z Y Z Z Sensor -IFMF- Z Z Indicating Standard -IFMD -RIFMD -RTB Z Z Z Z Extr. -IFMD- Z Z Extr. -IFMDA- -RIFMDA- -RTB Z Z Sensor -IFMD- Z Z Isolated -IFMDS- Y Y Y Y Y Y Isolated Extr. -IFMDSA- Y Y -IFMDA- Z Isolated -IFMDS- Y Y Y Isolated Isolated Extra Terminals -IFMDSA- Y -IFMDSA- Y Fusible -IFMF-F- -RIFMF-F- -RTB Z Z -IFMF-FD- Y -IFMF-FAD- Y -IFMF-F- Z Z Fusible - Isolated Extr. -IFMF-FS- Y Y Y Y Y -IFMF-FS- Y Y Y Y Y -IFMF-FSA- Y Extr. -IFMF-FS- Y Y Y Y Y Y Y Y Extr. -IFMF-FS- Y Y Y Y Y Y Y See footnotes on the following page. -IFMF-FSA- Y Y Y Y -IFMF-FS- -RIFMF-FS- -RTB Y Y Y Y -IFMF-FS- -RIFMF-FS- -RTB Y Y Y -IFMF-FSA- -RIFMF-FSA- -RTB Y Y -IFMF-FS- Y Y Y -IFMF-FSA- Y Safety Integrity Level (SIL) -TIFMF-FA- Z Z -TIFMF-- Y -IB -IV -IHI -IMI -OAI -OBEI -OBD -OBI -OBIS -OB -OVE -OHI -OWI -OXI -

4 Bulletin Bulletin CompactLogix Modules Digital IFMs and Cables for Bulletin CompactLogix -point I/O Expansion Modules Bulletin CompactLogix I/O Module [V]... per I/O RTB Plugs Cat. No. Cat. No. Cat. No. Feed-Through -IQ -IQT -OB -OBT Digital Cable Cat. No. Suffix Standard -IFMF -RIFMF -RTB J H K H H Extr. -IFMF- -RIFMF- -RTB J H K H H Sensor -IFMF- J H Indicating Standard -IFMD -RIFMD -RTB J H K H H Extr. (output) -IFMD- K H H Extr. -IFMDA- -RIFMDA- -RTB J H Sensor -IFMD- J H Extr. -IFMF-F- -RIFMF-F- -RTB K H H... Extr. -IFMF-F- K H H -OVT See footnotes on the following page. -

5 Bulletin Bulletin and MicroLogix Modules Digital IFMs and Cables for Bulletin MicroLogix I/O Bulletin MicroLogix I/O Module [V] per I/O Feed-Through Standard -IFMF -RIFMF A A A B B B -RTB Extr. -IFMF- -RIFMF- A A A B B B To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_ Custom Length Cable = -CABXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs per catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog number with the code for the desired terminal style. The code for screw style is N and the code for push in style is P. When using this IFM module with the base I/O of the controller, the current rating of the outputs must be considered. Refer to Publication -TD for details. Digital IFMs and Cables for Bulletin MicroLogix I/O [V] per I/O -LAWA Inputs -LBWA Inputs -LBXB Inputs -LAWA Outputs -LBWA Outputs -LBXB Outputs Bulletin MicroLogix I/O Module Feed-Through Narrow -IFMFN -RIFMFN -RTB A A B C C F Standard -IFMF -RIFMF -RTB A A B C C F Extr. -IFMF- -RIFMF- -RTB A A B C C F To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_ Custom Length Cable = -CABXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs per catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog number with the code for the desired terminal style. The code for screw style is N and the code for push in style is P. When using this IFM module with the base I/O of the controller, the current rating of the outputs must be considered. Refer to Publication -TD for details. -AWA Inputs -BWA Inputs -BXB Inputs -AWA Outputs -BWA Outputs -BXB Outputs -

6 Bulletin Bulletin Flex I/O Modules Digital IFMs and Cables for Bulletin Flex I/O -Point and -Point Modules [V]... per I/O -IB -IB Bulletin Flex Digital I/ Module Feed-Through Standard -IFMF -RIFMF -RTB A A A A A A A A A A A Narrow -IFMFN -RIFMFN -RTB A A A A A A A A A A A Extr. -IFMF- -RIFMF- -RTB A A A A A A A A A A A Sensor -IFMF- A A A Indicating Standard -IFMD A A A A A A Narrow -IFMDN A A A A A A Extr. (output) -IFMD- A A A A A A Extr. -IFMDA- A A A... Isolated w/ Extr. Isolated w/ Extr. -IFMDS- A -IFMDS- A Fusible Blown Fuse -IFMF-F- -RIFMF-F- -RTB A A A A A A Blown Fuse -IFMF-FA- -RIFMF-FA- -RTB A A Blown Fuse -IFMF-F- -RIFMF-F- -RTB A A A A A A Fusible, Isolated Blown Fuse -IFMF-FS- A... Extr. (output) -IFMF-FS- A Blown Fuse -IFMF-FS- A Digital IFMs and Cables for Bulletin Flex I/O -Point and -Point Modules -IBXOB -IV -OB -OBP -OB -OBEP -OV -OVP -OW Bulletin Flex Digital I/O Module [V]... per I/IO -IBD - IBXOBP Feed-Through Standard -IFMF -RIFMF -RTB B B B B Extr. -IFMF- -RIFMF- -RTB B B B B Indicating Standard -IFMD -RIFMD -RTB B B Extr. (output) -IFMD- B Extr. -IFMDA- -RIFMDA- -RTB B Extr. Blown Fuse Fusible -IFMF-F- -RIFMF-F- -RTB B... Extr. (output) -IFMF-F- B To order a Pre-wired Cable, add the Suffix No. from the table above to the end of the Cat. No. below..m Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_.M Cable = -CAB_ Custom Length Cable = -CABXXX_. See Catalog Number Explanation on page - for available Custom Length Codes to replace XXX in Cat. No. Order plugs separately (two plugs per catalog number). Plugs are available in screw style and push in style terminal types. To order, replace the in the catalog number with the code for the desired terminal style. The code for screw style is N and the code for push in style is P. Uses D-Shell Base -TBDS Uses D-Shell Base -TBDS -IB -OBP -

7 Bulletin Digital Cables I/O Ready Digital Cables I/O-Ready for Bulletin ControlLogix Cable Cat. No. Cable Cat. No. Standard Cable Lengths -CABLE TBNH.,.,. m Yes -CABLE TBCH.,.,. m Yes Standard Cable Lengths Build-to-Order Available No. of Conductors Mating I/O Module Cat. No. -CAB RTN.,.,. m Yes -OA, -OW, -OB -CAB RTN.,.,. m Yes -IAI, -IA, -IQ, IQF, -OA, -OB, -OV, -OW, -OWI, -IM, -OW, -B -CAB RTNI.,.,. m Yes -IQ -CAB RTNO.,.,. m Yes -OB -CABLE N.,.,. m Yes -IQT, -OBT, -OVT Cables are available in standard lengths of.,., and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABRTN is for a. m cable with a wired Cat. No. -RTBN on one end. Use # AWG wire. Discrete I/O ready cables should not be used with PLC analog I/O modules as a cable shield and drain wire are not provided. Cable Cat. No. Standard Cable Lengths Build-to-Order Available No. of Conductors Mating Controller I/O Cable Cat. No. -CAB P.,.,. m No -OBT and -OVT Output Expansion I/O -CAB U.,.,. m No -IQT Input Expansion I/O -CAB T.,.,. m Yes -LAWA Outputs, -LBWA Outputs, -LBXB Outputs -CAB X.,.,. m Yes -LAWA Inputs, -LBWA Inputs, -LBXB Inputs I/O ready cables are available in standard lengths of.,., and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABT is for a. m cable that could be used to connect a catalog number -IFMF to a catalog number -LAWA Input. Cable Cat. No. Standard Cable Lengths Build-to-Order Available No. of Conductors Mating Base I/O Cat. No. -CAB T.,.,. m Yes AWA Outputs, BWA Outputs -CAB U.,.,. m Yes BXB Outputs -CAB W.,.,. m Yes AWA Inputs, BWA Inputs -CAB X.,.,. m Yes BXB Inputs I/O ready cables are available in standard lengths of.,., and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABT is for a. m cable that could be used to connect a catalog number -IFMF to a catalog number -AWA Input. Uses # AWG wire. Uses # AWG wire. Standard Cable Lengths Build-to-Order Available No. of Conductors Mating I/O Module Cat. No. -IAD, -IA, -IB, -IC, -IN, -IV, -OA, -OAD, -OAE, - OA, -OB, -OBE, -OC, -ON, -OVE -IAI, -IA, -IBD, -IBI, -IB, -IV, -IHI, -IMI, -OAI, -OBEI, -OBD, -OBIS, -OBI, -OB, -OVE,-OHI, -OWI, -OXI Cables are available in standard lengths of. m,. m, and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABLETBNH is for a. m cable with a pre-wired Cat. No. -TBNH RTB on one end. Discrete I/O read cables should not be used with PLC analog I/O modules as cable shield and drain wires are not provided. Digital Cables - I/O-Ready for Bulletin CompactLogix Digital Cables I/O-Ready for Bulletin MicroLogix Digital Cables I/O-Ready for Bulletin MicroLogix Digital Cables I/O-Ready for Bulletin Flex I/O Build-to-Order Available No. of Conductors Mating I/O Module Cat. No. -CAB G.,.,. m Yes -IB, -IB, -IV, -OB, -OBP, -OB, -OBEP, -OV, OVP, - OW, -IBXOB -CAB H.,.,. m Yes -IBD, -IB, OBP, -IBXOBP Cables are available in standard lengths of.,., and. m. To order, insert the code for the desired cable length into the cat. no. ( =. m, =. m, and =. m). Example: Cat. No. -CABG is for a. m cable. Not available for Analog I/O Modules -

8 Bulletin Specifications Digital IFM Specifications - Digital IFM Cat. No. Range Dimensions (W x H x D) [in.] Indicator Circuit Current (Nominal) [ma] Label Card Cat. No. -IFMF, -RIFMF V AC/DC. x. x. --, -- -IFMFN, -RIFMFN V AC/DC. x. x. --, --, -- -IFMF-, -RIFMF- V AC/DC. x. x. --, --, -- -IFMF- V AC/DC. x. x. -- -IFMD V AC/DC. x. x. --, -- -IFMDN V AC/DC. x. x. --, --, -- -IFMD- V AC/DC. x. x. --, --, -- -IFMDA- V AC/DC. x. x. -- -IFMDS- V AC/DC. x. x IFMD- V AC/DC. x. x. --, -- -IFMD V AC/DC. x. x.. --, -- -IFMDN V AC. x. x.. --, --, -- -IFMD- V AC. x. x.. --, -- -IFMDA- V AC. x. x IFMDS- V AC. x. x IFMD- V AC. x. x.. --, -- -IFMDA- V AC. x. x IFMF-F-, -RIFMF-F- V AC/DC. x. x. --, --, -- -IFMF-F-, -RIFMF-F- V AC/DC. x. x. --, --, -- -IFMF-FA-, -RIFMF-FA- V AC/DC. x. x.. --, -- -IFMF-F-, -RIFMF-F- V AC. x. x.. --, --, -- -IFMF-FA-, -RIFMF-FA- V AC/DC. x. x.. --, -- -IFMF-F- V AC. x. x.. --, -- -IFMF-FS- V AC/DC. x. x. -- -IFMF-FS- V AC/DC. x. x. -- -IFMF-FSA- V AC/DC. x. x IFMF-FS- V AC/DC. x. x IFMF-FS- V AC/DC. x. x IFMF-FSA- V AC/DC. x. x IFMF-FS- V AC. x. x IFMF, -RIFMF V AC/DC. x. x. --, --, -- -IFMF- V AC/DC. x. x. --, --, --, --, -- -RIFMF- V AC/DC. x. x. --, --, --, --, -- -IFMF- V AC/DC. x. x. --, -- -IFMD, -RIFMD V AC/DC. x. x. --, --, -- -IFMD- V AC/DC. x. x. --, --, -- -IFMDA- V AC/DC. x. x. --, --, --, --, -- -RIFMDA- V AC/DC. x. x. --, --, --, --, -- -IFMDS- V AC/DC. x. x IFMDSA- V AC/DC. x. x IFMD- V AC/DC. x. x. --, -- -IFMD- V AC. x. x.. --, --, -- -IFMDA- V AC. x. x.. --, --, - -IFMDS- V AC. x. x IFMDSA- V AC. x. x IFMDSA- V AC. x. x IFMF-F- V AC/DC. x. x. --, --, -- -IFMF-F- V AC/DC. x. x. --, --, --, --, - -RIFMF-F- V AC/DC. x. x. --, --, --, --, - -IFMF-FD- V AC/DC. x. x. <. -- -IFMF-FAD- V AC/DC. x. x. <. -- -IFMF-F- V AC. x. x.. --, --, -- -IFMF-FS- V AC/DC. x. x. -- -IFMF-FS- V AC/DC. x. x. -- -IFMF-FS- V AC/DC. x. x. -- -IFMF-FS- V AC/DC. x. x IFMF-FS-, -RIFMF-FS- V AC/DC. x. x IFMF-FS- V AC/DC. x. x RIFMF-FS- V AC/DC. x. x IFMF-FS- V AC/DC. x. x IFMF-FSA- V AC/DC. x. x IFMF-FSA- V AC/DC. x. x RIFMF-FSA- V AC/DC. x. x IFMF-FSA- V AC/DC. x. x. -- -IFMF-FSA- V AC/DC. x. x TIFMF-F- V DC. x. x. -- -TIFMF-FA- V DC. x. x. -- To convert to millimeters, multiply inches by. Ships with each module. For spare part, precede the part number with the letter "W." Add. in. to the width dimension for Bulletin -Rxxx modules.

A-B Compatible Interface Modules. Connect with CAGE CLAMP

A-B Compatible Interface Modules. Connect with CAGE CLAMP AB Compatible Interface Modules Connect with CAGE CLAMP Interface Modules for AllenBradley PLC Platforms Connect with CAGE CLAMP Wiring systems for PLC I/O cards have been reducing wiring time, eliminating