Curb foam adhesive. Edging foam adhesive "T" Masking systems

Transcription

1 Curb foam adhesive Curb spongy foam adhesive suitable for masking the cracks of vehicle bodies during painting. The shape and flexibility allow the perfect fit into the slots, and prevents the penetration of dust inside during the spraying. Available in different sizes to fit the size of the joints by close. Code Desc. Diam. mm Roll length MT MT Edging foam adhesive "T" Edging foam for masking of slits on the bodywork of motor vehicles, it allows not to allow paint to penetrate into the joints between the plates and to obtain a detachment precise and perfect in the simplest way possible. Designed for painting operations in car body of cars of each type. The special shape of "T" with adhesive on the back makes installation easier and faster compared to normal curbs round, and a degree of surface finish with no cuts or steps on the paint. Measuring only in dispenser boxes of 25 meters. Code Description Length m

2 Paper masking Paper masking of the classical type "kraft", waterproof paints also to water and solvents. Suitable for all the operations of masking before painting in bodywork. Grammage 40 g / m 2 +/-. Brown color, with a smooth side and one rough. On our wall mountable holder until H 85 cod Code Desc. Height cm Length m Coated paper for masking Masking paper white kraft coated on one side, it is waterproof to paints, also water, and the lenses. Suitable for all the operations of masking before painting in bodywork. Grammage 40 g / m2 +/- 2. White color. To avoid peeling paint at the time of removal, it is recommended to be painted on the side not covered. Code Desc. Height cm Length m Roll holder Wall Paper masking Roll holder in painted sheet. Rolls capabilities: h 10 cm - h 0 cm - h85cm. Holder with the system that allows to apply the tape adhesive paper n / s art h19 on paper. Code Desc

3 Polyethylene sheet HD masking Towel for masking polyethylene HD (high density), with external treatment for paint adhesion, even to water, and transparent. Absolute absence of passage within paint. Electrostatic canvas that adheres only to the surfaces facilitating the work of masking. Ideal for work masking bodywork, and for coating booths. The paint does not come off and does not flake during removal. Suitable for drying in the oven or by means of UV lamps. Transparent color for precise cutting edge. Supplied in a protective box. Roll width 9 cm, with cardboard core, for inclusion in any holder of any brand. Code Desc. Dimension in m. Width X Length x x 150 Film rolls Rolls of film on paper tape backing, 22 mm Ideal for coverage before painting With treatment for adherence to paint Areas of use: bodywork, paint stations, painters and decorators, and boatbuilding sector, Resistant up to 80 Film thickness 10 my Code Description h roll cm Dimensions /0-Film roll 0cm x20m. 10 cm cm.0x20m /90-Film roll 90cmx20m. 20 cm cm.90x20m /120-Film roll 120cmx20m 20 cm cm.120x20m /270-Film roll 270cmx1m 20 cm cm270x1m 70

4 Roll dispenser Equipment for easy use Used to pull out, position and cut the film. In plastic material Code Description /10 Roll dispenser h /20 Roll dispenser h20 Shopping for masking towels in dispenser Steel trolley for positioning and the easy portability of the dispenser boxes of towels polyethylene masking. Painted steel, particularly robust, with large wheels for easy handling. Code Desc. Dimensioni in cm. Width x height x depth x70x73 Mini "Cutter" for the cutting of the cloth HD Mini cutter to cut to the desired size towel in HD. Plastic material with angled blade for increased cutting efficiency. Pack of nr. 5 pieces. Code Desc. Measures (mm) x53 71

5 Parking sensor protection Easy to apply. Fits most sensor types. Serves to paint and sand over sensors. 18 mm diameter Serves to cover parking sensors during sanding and painting operations. The special shape means the product can be removed easily, with no paint drips, covering the sensors quickly and effectively for excellent finished results. Code Description Parking sensor protection Masking polyethylene for rims Masking polyethylene preformed to protect the tires and simple painting of car rims. Suitable for all body shops and paint industries, tire shops, etc.. Pre-cut into pieces already separated, the high elasticity of the material allows the protection, once deflated and stallonata the rubber, fit perfectly on the edge of the circle, and adhere to the perimeter of rubber for a perfect masking the paint and fumes painting. Huge time savings, the masking of the tires is carried out in about 2 minutes against the 15 required with conventional methods (paper or polyethylene sheet). Suitable for steel wheels and alloy wheels with diameters up to 22 ". Supplied in a practical dispenser box cardboard. the single piece open has dimensions of 1300 x 1300 mm. Available on request a wall support in painted steel for positioning the most 'practical. Code Desc. Article Dispenser box of 80 pieces 1300x1300 mm Support wall painted 72

6 Steering wheel cover and cover transmission in TNT Material: TNT (nonwoven fabric). Practical steering wheel cover and cover change. In addition to protecting the steering wheel and the gear lever from any type of dirt, add value to your business, as they attest to the care you have had for the cars of your clients. TNT gives the articles softness, elasticity and resistance. In particular, the cover transmission presents an elasticity sealing under the head of the gearbox that prevents it from slipping off. Both equipped with seams along the edges to ensure high durability. Code Desc. Article Steering wheel cover Cover Transmission Seat covers neutral Material: Polyethylene. Practices seat covers neutral transparent material. Thickness: 20 microns. Particularly suitable for body shops and workshops. Flexible, lightweight and resistant to abrasion. In addition to protecting the seat from any type of dirt, add value to your business, as they attest to the care you have had for the cars of your clients. Dimensions: 150 x 710mm. Not customizable. Code Desc. Rips number-cont /T 125 seat covers transp /1 250 seat covers White 73

7 Foderine coprisedili Meccanocar Code Desc. Content Bobina da 125 foderine Espositore murale Meccanocar Code Desc

8 Set of disposable protective Characteristics: Set of protection for cars packed in disposable bags with everything needed inside. Seat cover, steering wheel cover, handbrake cover and cover transmission white polyethylene. Suitable for car workshops and industrial vehicles, bodywork, elettrauto, transformers vehicles, etc. The set consists of 100 envelopes each containing: 1 seat cover in polyethylene thickness 13 microns white, 1 steering wheel cover with elastic edge in polyethylene, a cover transmission edge stretch, a handbrake cover with elastic edge, a mat coated paper dimensions 50 x 37 cm. The packaging in single envelopes allows a better management of the material by the workshop and a saving of time and costs. Available a practical wall bracket in painted steel with epoxy. Box dimensions: 300 x 230 x 280 mm. Weight: 4. kg approx. Code Desc. Article Content pcs Kit Protective Disposable Wall support 1 Canvas magnetized Characteristics: Material: PVC. Color: black background. Extremely easy of application via magnet.. The foam padding on the back allows you to work safely without the risk that the part in contact with the car may scratch the car body. The material is highly resistant, has a long durability of the cloth magnetized. Option to buy the towel with logo Meccanocar or neutral. Code Desc. Color Formato Meccanocar 112x4 cm /0 Neutral 112x4 cm 75

9 Copriparafango adesivo di protezione Bobina di foderine usa e getta in polietilene per proteggere i veicoli in officina e carrozzeria. Si applica tramite una banda adesiva su tutte le carrozzerie in plastica o alluminio. Il materiale del copriparafango non attira frammenti e polveri metalliche che potrebbero depositarsi sulle vetture. Ogni bobina e composta da 100 strappi in polietilene bianco. Dimensioni strappo: 90x1090 mm. Dimensioni supporto murale: 745x 100 mm Personalizzazione: Con il logo del cliente fino ad un massimo di colori; disponibili tutti i marchi automobilistici. In ogni strappo compaiono 2 ripetizioni del logo. Code Desc. Rif Generica Shelter sticker for goalkeeper Roll of cellophane multi-purpose adhesive, expressly studied for the containment of the glass cracked or broken during disassembly, to avoid that the splinters can fall inside the vehicles, with the consequent difficulties of cleaning, or may injure the operator. Excellent adhesion even on complex surfaces or curved. It can also be applied on fabrics and coatings of various nature without danger of damage during removal. It can also be used as a safety fixing of the side windows or rear windows on the way up to the engineer to avoid breakage or explosion during the journey. Ideal application for cover as moisture inside of the doors. Code Desc. Dimensions m X 0 cm 7

10 Cellophane adhesive safety film Self-adhesive film with polyethylene foam for the under coating of front and rear doors of each type of vehicle. Product repositionable, resistant to moisture, water, dust, particularly suitable for the reconstruction of the shelters damaged during disassembly for repairs. The type of product in foam material is used in original equipment by several automakers, and therefore can reproduce the original finish. Highly conformable and can be cut in many different ways. Package of 0 cm high and 10 meters in total length. Code Desc. Dim. LxH. cm x