Conventional Air Atomising Spray Lances

Size: px

Start display at page:

Download "Conventional Air Atomising Spray Lances"

Judith Perkins
5 years ago
Views:

Conventional Air Atomising Spray Lances EXITFLEX 38 Series Airspray Gun Lances do not feature needles and thus require a different technique in use.

confined spaces The Lances are 3mm thick wall aluminium tubing as also used with the EXITFLEX airless spray extension items, this makes it easy for you to stock for air spray or airless spray

1 Conventional Air Atomising Spray Lances EXITFLEX 38 Series Airspray Gun Lances do not feature needles and thus require a different technique in use. In practice, they provide a positive affordable solution to users where a slim, lightweight extension is required for paint spray or wax application into difficult to reach areas inside tubes or confined spaces The Lances are 3mm thick wall aluminium tubing as also used with the EXITFLEX airless spray extension items, this makes it easy for you to stock for air spray or airless spray applications. It is important to note that the atomisers detailed in this section are for use in air spray applications only, they are not suitable for airless Some liquids may not be suitable for use with these atomisers. It is important to use separate air and fluid control regulators. Pressure feed guns should normally feature a 1.4mm fluid tip, or a 1.8mm fluid tip. Extensions will only operate with pressure feed. TYPE REF DESCRIPTION Fogging chamber to fit BRPHVLP gun (page 45) Fogging chamber to fit Iwata W Fogging chamber to fit Iwata W Fogging chamber to fit DeVilbiss, Sagola (not HVLP) Fogging chamber to fit DeVilbiss, Compact Gun Fogging chamber to fit Binks Fogging chamber to fit Binks BBR Fogging chamber (air assisted airless)to fit AAG-2000, GRACO AA 2000, ALPHA PLUS & AA PLUS Adaptor for use with Flexi, 1/2 JIC M x 1/2 JIC M Adaptor 1/2 JIC M 1/4 UNF F for use in rigid extensions Spinning atomiser, forward, backward and side spray 1/4 UNF Spinning atomiser, side spray only 1/4 UNF Fixed atomiser for use with flexi lance /16 Lance 6 length rigid /16 Lance 12 length rigid /16 Lance 18 length rigid /16 Lance 24 length rigid /16 Lance 36 length rigid A complete extension comprises 1 Fogging chamber, 1 Lance (length to suit) adaptor plus/antomiser of your choice. These extensions require a pressure feed system. Flexible Extensions - PA131J230 Flexi lance 1 metre including fixed atomiser (excl. fogging chamber) Flexible extensions are available using the or 220 spinning atomiser with 1/4 bore nylon hose. Prices by enquiry Slimline Extensions Slimline extension tube only not including nozzle. Accepts or order fogging chamber extra to suit. Nickel plated finish 18 long, 11mm OD Slimline angled fixed fan atomiser complete with fogging chamber to suit and choice of 6, 12 or 18 length. 11mm OD PA131J It is important to ensure a balanced air and fluid pressure at the spray gun. To assist in achieving this it is advisable to use a mini air regulator - or filter regulator please see page 9. Standard 12 extension for DeVilbiss JGA/GTi spray gun with forward, backward & side spray 360 atomiser nozzle.

Airless Spray Lances Flow Gun 350 Bar (5,000 psi) max inlet pressure fluid inlet connection 1/4 NSP(M) weight: 500 grams Airless Flow Gun - model 880-355 suitable for application of grease, sealers

880-355 Flow Gun Pole Guns 210 Bar (3,000 psi) max inlet pressure fluid inlet connection 1/4 NPS(M) Airless Pole Guns - suitable for many kinds of paint products. Trigger guard included.

2 Airless Spray Lances Flow Gun 350 Bar (5,000 psi) max inlet pressure fluid inlet connection 1/4 NSP(M) weight: 500 grams Airless Flow Gun - model suitable for application of grease, sealers and various products of high viscosity. Normaly used with extrusion pumps up to 350 Bar MWP. Trigger guard fitted as standard Flow Gun Pole Guns 210 Bar (3,000 psi) max inlet pressure fluid inlet connection 1/4 NPS(M) Airless Pole Guns - suitable for many kinds of paint products. Trigger guard included. Needle extended up to an adjustable position housing, 11/16 UNF connection to accept Mk IV tip housing. PG-300 Pole Gun 3000mm PG-240 Pole Gun 2400mm PG-180 * Pole Gun 1800mm PG-150 * Pole Gun 1500mm PG-130 Pole Gun 1300mm PG-090 Pole Gun 900mm PG-050 Pole Gun 500mm * Stock, others to order

x 1 Atlas Copco 2 36-207/43 Nut 11/16-16 UNEF Wagner, Aro 3 32-002/17 Directional w/filter housing 7/8 UNF 3 32-007/17 Directional w/filter housing 11/16 UNF 4 32-102/17 Straight

Pack of 10 5 36-005-K10 Disc filter 100 mesh.

3 Airless Spray Lances NO. TYPE REF DESCRIPTION /2 Universal connector /43 Nut 7/8-14 UNF Graco /30 Nut 3/8-18 NPS DeVilbiss, Kremlin /30 Nut 3/4-20 UNF Binks /30 M 18 x 1 Atlas Copco /43 Nut 11/16-16 UNEF Wagner, Aro /17 Directional w/filter housing 7/8 UNF /17 Directional w/filter housing 11/16 UNF /17 Straight filter housing 7/8 UNF /17 Straight filter housing 11/16 UNF K10 Disc filter 30 mesh. Pack of K10 Disc filter 60 mesh. Pack of K10 Disc filter 100 mesh.pack of K10 Disc filter 200 mesh Pack of /27 Straight adaptor 7/8 UNF /27 Straight adaptor 11/16 UNF /46 Seal /16 Lance 6 inches /16 Lance 12 inches /16 Lance 18 inches /16 Lance 24 inches /16 Lance 36 inches Nylon plug seal (use in place of filter for speedy MKV) Directional filter housing & Speedy MkV (page 54) 12 extrension on SP90 airless gun (page 40) with directional filter housing & Speedy MkV (page 39).

4 BIG INDUSTRIAL WIPES PROFESSIONAL BIW-640 Tray of 8 tubs of 80 wipes

General Consumables GW30BK Textile overbraid sleeving (Polyester) 25-30mm GW40GR Textile overbraid sleeving (Polyester) 40-60mm PVCT 2/400 PVC sleeve

This is a non silicone oil for safe use with spray equipment 50ml bottle with nozzle DCL-K50 DCM-K50 Coveralls - pack size 50 Superior non-woven cloth

Water repellent Abrasion resistant - low lint Elasticated wrist, ankle and hood Reusable Zippered front Large Medium N40-K50 Green disposable Gloves -

5 General Consumables GW30BK Textile overbraid sleeving (Polyester) 25-30mm GW40GR Textile overbraid sleeving (Polyester) 40-60mm PVCT 2/400 PVC sleeve 2 (50mm) approx 200m roll PVCT 3/400 PVC sleeve 3 (75mm) approx 200m roll Spray gun lubricant Suitable for lubricating spray guns, pumps etc. This is a non silicone oil for safe use with spray equipment 50ml bottle with nozzle DCL-K50 DCM-K50 Coveralls - pack size 50 Superior non-woven cloth like fabric, soft yet strong. Water repellent Abrasion resistant - low lint Elasticated wrist, ankle and hood Reusable Zippered front Large Medium N40-K50 Green disposable Gloves - pack size 50 Latex, abrasive resistant gloves, offering protection for the hands, suitable for use with paints and inks. Not suitable for continuous immersion in aggressive solvents. Universal visor covers to suit square or round edge visors UVC-K10 Pack 10 UVC-K50 Pack 50

------------------------------------------------------------------------------------------------------------------------------------- FOR PREPARATION AND MIXING OF LIQUID MATERIALS The PM 60

Air Driven Paint Agitators Standard Features Comfortable Handle Can be hand-held/flange mounted or on 60-100 stand Light Weight High Quality Function Stainless Steel Shaft & Propeller Long Service

5 to 8 BAR Speed @ 4BAR = 900RPM Air consumption = 100 L/min Output = 60 Watts Weight (excluding stand) = 1.

42HP direct drive air motor for greater mixing ability either for heavier materials or in larger quantities up to 25-litre capacity.

6 FOR PREPARATION AND MIXING OF LIQUID MATERIALS The PM 60 pneumatic agitator is perfect for preparation and mixing of most paints in containers of 5 and 10 litre capacity. Some materials, such as lacquer may also be agitated in larger volume containers. Air Driven Paint Agitators Standard Features Comfortable Handle Can be hand-held/flange mounted or on stand Light Weight High Quality Function Stainless Steel Shaft & Propeller Long Service Life Integral Speed Control & silencer flange mounting connection also available Technical Data Air pressure for operation 0.5 to 8 BAR 4BAR = 900RPM Air consumption = 100 L/min Output = 60 Watts Weight (excluding stand) = 1.10kg Shaft length = 440mm Propeller Diameter = 70mm PM60 pictured on adjustable height stand (60-100) The MRM-050 features a 0.42HP direct drive air motor for greater mixing ability either for heavier materials or in larger quantities up to 25-litre capacity. Standard Features Comfortable T Bar Handle Grip Can be hand-held Light Weight High Quality Function Long Service Life Integral Speed Control & silencer Technical Data Operating Air Pressure 0.5 to 5.6BAR 5.6BAR = 6,000RPM Air consumption = 5.6BAR Output = 0.33kW Weight (excluding stand) = 2.0kg Shaft length = 500mm Spiral Paddle Diameter = 80mm 80mm spiral paddle Exitflex (UK) Ltd 5 Airfield Road Airfield Industrial Estate Christchurch Dorset BH23 3TG United Kingdom Tel: +44 (0) Fax: +44 (0) Order Online: Top Quality - Best Results

Mixing Tanks PM60-250 The 60-250 package makes the preparation and use of spray applied materials simple and clean to handle whilst at the same time helps to ensure that your material achieves and

The lid itself is spun and laser profiled has a filler/viewer point with pear shaped access plate, a 1/2BSP male connection fluid suction tube (reaching the bottom of the pail) and a PM-60 pneumatic

7 Mixing Tanks PM The package makes the preparation and use of spray applied materials simple and clean to handle whilst at the same time helps to ensure that your material achieves and remains at the correct specification - ready for use It comprises a standard industrial 25 litre pail with stainless steel lid, which fastens to the pail using three external fixings. The lid itself is spun and laser profiled has a filler/viewer point with pear shaped access plate, a 1/2BSP male connection fluid suction tube (reaching the bottom of the pail) and a PM-60 pneumatic mixer. Standard Features Light weight High quality function Stainless steel shaft & propeller Long service life Integral speed control & silencer Technical Data Air pressure for operation 0.5 to 8Bar 4 Bar = 900RPM Air consumption = 100L/min Output = 60 Watts Weight (excluding stand) = 1.10kg Standard shaft length = 440mm Propeller diameter = 70mm PM Pail mounted Agitator Assy Exitflex now design manufacture and supply stainless steel mixing tanks to meet your exact specifications. Supplied with pneumatic operation mixers, filers/viewers, bottom outlet ball valve connections. 100 litre model Please alow us the opportunity to quote against your mixing vessel requirements. 45 litre model

Flexible installations The connections may be rotated 180. Simply turn the connections to fit your piping system.threaded BSP or NPT connections is standard. Twin connectons are also avaiable 2.

8 Pressure Feed Equipment 1/3 is enough for us... You will discover the ingenious simplicity when you maintain the pump. We use approximatley 1/3 the number of parts that our competitors use to build similar sized pumps. 2 Exitflex are pleased to offer an extensive range of double diaphragum pumps for transfer duty 1. Flexible installations The connections may be rotated 180. Simply turn the connections to fit your piping system.threaded BSP or NPT connections is standard. Twin connectons are also avaiable 2. Powerful valve seats The valve seat is under constant stress from the movement of the valve ball. To obtain best wear resistance, the integrated seat is made from AISI 316 stainles steel Low air consumption The air distribution system is designed with shortest possible air distribution ways. This eliminates dead spaces, resulting in high effiencey and low air consumption. Typical applications Industry Workshop Print & paint Mining & Construction Ceramic Industry Chemistry 1 Example of applications Oil, fat, solvents, water, cooling fluid, lubricants Glue, additives, varnish, ink, paint, latex, acid, resins, pigments Adhesives, sump, dewatering, coal, sludge, pastes Abrasives, glaze, water, enamels, clay Acids, alkalis, alcohol, solvents, latex, emulsions Please telephone we will be pleased to offer a quotation to match your specification. EPT2.5 Quick release lid clamp, saving time and reducing build up of materials Carrying handle/hook Suitable for conventional and HVLP applications Lid mounted pressure release valve Greater manoeuvrability abtained by operative compared with suction / gravity fed systems 5 Bar (70psi) maximum working pressure 3/8 BSP male fluid outlet connection 1/4 BSP male air inlet connection With a 2.5 litre cup and a maximum working pressure of 5 Bar the EPT2.5 reduces the need for repetitive cup filling and allows the spraying of lighter viscosity materials compared with cup guns. ETP2.5 ETP2.5K Cup Assy (no hoses) Cup Assy c/w 4ft hose

Pressure Feed Equipment Durable construction pressure vessels supplied ready for

Manual ETP10A Pneumatic ETP10B None - bottom outlet 20 litre MODEL AGITATOR TYPE

also available (see below). A comprehensive stock of spare parts is available.

9 Pressure Feed Equipment Durable construction pressure vessels supplied ready for use, with high quality valves, regulators and gauges there is a choice of manual or pneumatic mixing units. 10 litre MODEL AGITATOR TYPE ETP10 None Stainless steel version available ETP10M Manual ETP10A Pneumatic ETP10B None - bottom outlet 20 litre MODEL AGITATOR TYPE EPT20A Pneumatic Stainless steel version available EPT20M Manual Other sizes by enquiry NB. All 10 litre models feature an aluminium inner liner as standard - stainless steel also available (see below). A comprehensive stock of spare parts is available. Key components are:- MODEL PTP103 PTP118 PTP119 PTP112 PTP126 PTP123 AGITATOR TYPE 10 litre lid gasket 10 litre aluminium liner 10 litre stainles steel liner 10 or 20 litre pressure gauge 10 or 20 litre pressure regulator 20 litre lid gasket

AAG-2000 Manual Air Assisted Airless Spray Gun 240 Bar MWP accepts TRI-A reversible kit 2 finger trigger fluid inlet filter included CE marked 1/4 BSP air & fluid connection AAG-2000 illustrated with

(excl spray tip) supplied with standard air cap - order TRI-A separately if required.

10 AAG-2000 Manual Air Assisted Airless Spray Gun 240 Bar MWP accepts TRI-A reversible kit 2 finger trigger fluid inlet filter included CE marked 1/4 BSP air & fluid connection AAG-2000 illustrated with TRI-A system AAG-2000 Models TYPE REF DESCRIPTION AAG-2000 AAG-2000 manual air assisted airless spray gun 240 Bar MWP 1/4 BSP male air & fluid connection, complete with disc tip housing & screen (excl spray tip) supplied with standard air cap - order TRI-A separately if required. Spare parts for AAG-2000 spray guns TYPE REF DESCRIPTION TYPE REF DESCRIPTION Air cap retaining ring Fan regulator A Air cap retaining ring TRI-A Valve cap Air cap (standard) Spring /15 AG mixair tip (state size) Air valve Tip gasket Packing nut O ring Valve packing Air diffuser Fluid gasket Needle seat Fluid connector /2000 Needle seat Fluid tube /2000 Needle /2000 Bush 36-XXX-K10 Disc tip filter (Pack 10) (See page 19 for choice of screens) /2000 Valve shaft Trigger Nut (x2) Air inlet connection Washer (x2) Disc tip filter housing Trigger pin

TRI-A Auto 140 Bar MWP (2000psi) accepts TRI-A reversible kit 1/4 BSP fluid connection CE marked TRI-A Spray Gun Models TYPE REF DESCRIPTION 83-600 AUTOMATIC TRI-A AIR ASSISTED AIRLESS SPRAY GUN 140

Accepts TRI-A 83-005 reversible nozzle system (not included as standard) The TRI-A air assisted airless spray gun in association with the TRI-A reversable spray tip system is suitable for use in

11 TRI-A Auto 140 Bar MWP (2000psi) accepts TRI-A reversible kit 1/4 BSP fluid connection CE marked TRI-A Spray Gun Models TYPE REF DESCRIPTION AUTOMATIC TRI-A AIR ASSISTED AIRLESS SPRAY GUN 140 Bar MWP (2000psi). Includes a mounting base with air and fluid fittings and connections. Compact and durable. Teflon packings and stainless steel fluid passages. Accepts TRI-A reversible nozzle system (not included as standard) The TRI-A air assisted airless spray gun in association with the TRI-A reversable spray tip system is suitable for use in demanding industrial applications. The features of the gun and air cap/nozzle combination provide many benefits to the user; reduced down-time due to reversible cleaning nozzles and ease of servicing, compact, durable anodised body, superb atomisation and fan control. TwinTips also available giving 2 angles back-to-back from 1 tip key. Pos. Ref Description Head Needle Packing Kit Air Valve Kit Body Fluid Inlet Connection Body Air Inlet Base Control Air Piston Assembly Piston Spring Cylinder Cap Needle Spring Needle Adjuster Assembly Pos. Ref Description Air Cap Separation Gasket Repair Kit Comprising: 3 x O Rings ref 3b) 1 x O Ring (ref 11a) 1 x O Ring (ref 11b) 1 x Piston Spring (83-612) 1 x Needle Spring (83-614) 6 x O Rings (ref 10a) 1 x Air Cap Separation Gasket (83-403)

TRI-A Air Assisted Airless Spray Gun reversible AAA 140 Bar MWP 2 finger trigger CE marked disc tip filter built into fluid tube 1/4 BSP fluid inlet connection 1/4 BSP air inlet connection manual &

Two air chambers, MWP 140 Bar. 1/4 BSP air & fluid inlets. Colour blue.

12 TRI-A Air Assisted Airless Spray Gun reversible AAA 140 Bar MWP 2 finger trigger CE marked disc tip filter built into fluid tube 1/4 BSP fluid inlet connection 1/4 BSP air inlet connection manual & automatic guns TRI-A illustrated with reversible aircap & tip TRI-A Spray Gun Models TYPE REF DESCRIPTION MANUAL TRI-A AIR ASSISTED AIRLESS SPRAY GUN 140 Bar MWP (2000psi). Two air chambers, MWP 140 Bar. 1/4 BSP air & fluid inlets. Colour blue. (excludes air cap & tip) Spare parts for TRI-A manual spray guns (83-001) TYPE REF DESCRIPTION TYPE REF DESCRIPTION Aircap retaining ring Air valve plug Friction ring (PTFE) Air valve spring TRI-A air cap base Air valve packing TRI-A swiveling seal assembly Air valve opening bar /23 K10 Nylon gasket for (pk10) O ring (green viton) TRI-A ball tip & seal kit(state size) Air valve body TRI-A ball tip (state size) Air/needle valve needle packing Air cap separation gasket Flat washer 3x7x0.5 zinc plated Body / nozzle holder Air valve packing spring PTFE packing Air valve packing nut Needle packing set (complete) Trigger lock lever and screw Packing nut Air inlet connection 1/4 BSP male Head cone gasket Air control valve (complete) Trigger pin screw Trigger Fluid needle (complete) Filter housing (without filter) Fan control adjuster (complete) K10 Disc tip filter (pack 10) See page O ring (green viton) Fluid inlet connection 1/4 NPS Fluid needle spring K10 Nylon cleaning brush (pack 10) Base for fluid needle spring Seals & springs kit (pos.2,6,9,12,23, Fluid control adjusting valve 25,29,30,32,34,35,36) Dismantling wrench For TRI-A Aircaps and Tips, see pages 67.

Air Spray Guns TYPE REF DESCRIPTION BRP HVLP Pressure feed. 19710 BRP HVLP Manual spray gun @ 1.0mm 19712 Pressure feed @ 1.2 19714 Pressure feed @ 1.4 19715 Pressure feed @ 1.

2 BRP HVLP spray gun fitted with VOW type twin hose & stainless steel 76 series reusable connections (page 6) BRP HVLP Spares 202XX Needle, fluid tip & air cap kit(replace XX with Ø) 1825XA Air cap

13 Air Spray Guns TYPE REF DESCRIPTION BRP HVLP Pressure feed BRP HVLP Manual spray 1.0mm Pressure Pressure Pressure Pressure Pressure Pressure 2.2 BRP HVLP spray gun fitted with VOW type twin hose & stainless steel 76 series reusable connections (page 6) BRP HVLP Spares 202XX Needle, fluid tip & air cap kit(replace XX with Ø) 1825XA Air cap (state size ie, 0.8mm - 2.2mm) 18345A Seals and springs repair kit 1828XA Fluid tip (state size ie 0.8mm) 1625XA Fluid needle (state size ie 0.8mm) R-K10 Pack 10 cleaning brushes 10638A 1000cc Camlock Suction Cup HVLP Automatic Spray Gun (Low Pressure) K99 Automatic HVLP spray gun. Stainless steel version with recirculation base. Sizes mm (please specify) K99 Turbine Spray Gun TPQ-98 HVLP turbine gun. High quality, non bleed Air Blow Guns Airblow gun with aluminium body Airblow gun with booster nozzle. Aluminium body TPQ-98 Cleaning Gun DG-10-EK Manual cleaning gun, syphons from separate container adjustable output 1/4 BSP air outlet DG-10-EK Gravity spraygun E-70 Heavy material spray gun 4mm nozzle. One litre aluminium gravity cup. 1/4 BSP air inlet E-70

65mm) 345 Bar MWP (5,000psi) 316 stainless steel (wetted) 1/4 BSP(F) fluid inlets AP20 Models TYPE REF DESCRIPTION 20-500 AP-20 automatic airless spray gun 345 Bar rated.

14 AP20 Automatic Airless Spray Gun The AP-20 automatic airless spray gun is made from 316 stainless steel, wetted. Designed for continuous use on automatic stations up to 345 Bar MWP AP-20 Stainless steel automatic airless spray gun illustrated with standard flat tip (not included) compact design (107 x 39 x 65mm) 345 Bar MWP (5,000psi) 316 stainless steel (wetted) 1/4 BSP(F) fluid inlets AP20 Models TYPE REF DESCRIPTION AP-20 automatic airless spray gun 345 Bar rated. Single 1/4 NPS male fluid connection AP-20 automatic airless spray gun 345 Bar rated. 2 x 1/4 NPS male fluid connections for recirculation Spare parts for AP20 spray guns POS. REF DESCRIPTION POS. REF DESCRIPTION Nozzle Packing screw Nozzle Packing Needle assembly Seat Piston disc Nozzle nut Nut M Gun body Spring Washer O ring Oil seal Needle packing set Cap nut Air seal Diffuser thread M18 x 1 accepts speedy V or speedy IV

AP81 Automatic Airless Spray Gun 250 Bar MWP CE marked 81-500 illustrated with 88-457 Speedy MkIV - see page 38 The AP81 automatic airless spray gun is designed for continuous use on automatic

15 AP81 Automatic Airless Spray Gun 250 Bar MWP CE marked illustrated with Speedy MkIV - see page 38 The AP81 automatic airless spray gun is designed for continuous use on automatic stations with high pressure airless spraying pumps and feature a diffuser tip, pneumatic operation, a flat tip guard as standard. AP81 Models TYPE REF DESCRIPTION AP81 automatic airless spray gun 250 Bar rated. Single 1/4 NPS male fluid connection incl speedy and tip AP81 gun only (excl tip and base) Spare Parts for AP81 spray guns POS. REF DESCRIPTION POS. REF DESCRIPTION Guard and nut O ring Fluid tip diffuser Lip seal Needle Piston Gasket O ring Nipple Lip seal Locking screw Lock nut Push in fitting Gun spring Pressure washer Cylinder screw cap Needle packing seal /A Ring Packing screw Diffuser thread 11/16 unf - accepts speedy V or speedy IV

SP90 Manual Airless Spray Gun 500 Bar MWP 4 finger trigger gun handle filter (included) CE marked swivel fluid inlet choice of 1/4 NPS / 1/4 BSP or M16 fluid inlet connection SP90 illustrated with

1/4 NPSM male fluid connection inc speedy + tip 11/16 x 16 90-501/00 SP90 manual spray gun 500 Bar rated. M16x1.

16 SP90 Manual Airless Spray Gun 500 Bar MWP 4 finger trigger gun handle filter (included) CE marked swivel fluid inlet choice of 1/4 NPS / 1/4 BSP or M16 fluid inlet connection SP90 illustrated with Speedy MkV (rated 517 Bar) - see page 54 SP 90 Models TYPE REF DESCRIPTION /00 SP90 manual spray gun 500 Bar rated. 1/4 NPSM male fluid connection inc speedy + tip 11/16 x /00 SP90 manual spray gun 500 Bar rated. M16x1.5 male fluid connection inc speedy + tip 11/16 x /00 SP90 manual spray gun 500 Bar rated. 1/4 BSP male fluid connection inc speedy + tip 11/16 x SP90 manual spray gun 500 Bar rated. 1/4 NPSM male fluid connection inc speedy + tip 7/8 x 14 Spare parts for SP90 spray guns POS. REF DESCRIPTION POS. REF DESCRIPTION Guard and nut assembly Handle gasket /2 Fluid tip diffuser 7/8 x Handle /7 Fluid tip diffuser 11/16 x Filter spring Guard Gasket Needle Swivel 1/4 NPS Needle packing seal Swivel M16 x Pressure washer Swivel 1/4 BSP Needle packing screw Trigger assembly Cylinder Trigger lock assembly Locking nut Trigger pin and nut Gun spring Needle repair kit (90-406/408/409/411) Spring cap Repair kit

SP91 Manual Lightweight Airless Spray Gun 350 Bar MWP 2 finger trigger ultra lightweight (425g) CE marked swivel fluid inlet trigger guard 1/4 BSP fluid inlet connection SP91 illustrated with Speedy

17 SP91 Manual Lightweight Airless Spray Gun 350 Bar MWP 2 finger trigger ultra lightweight (425g) CE marked swivel fluid inlet trigger guard 1/4 BSP fluid inlet connection SP91 illustrated with Speedy MkIV (rated 400 Bar) - see page 53 SP91 Models TYPE REF DESCRIPTION SP91 manual spray gun 350 Bar rated. 1/4 BSP male fluid connection inc speedy + tip Spare parts for SP91 spray guns POS. REF DESCRIPTION POS. REF DESCRIPTION Trigger guard Pusher pin (x2) Fluid tip diffuser U packing O ring Swivel connection 1/4 BSP Needle Trigger pin End cap Hex. Cap nut (x2) Pusher Set screw Packing retainer O ring Packing case Back up ring T Trigger assembly Spanner Spring Diffuser thread M18 x 1.5 accepts speedy V or speedy IV

Accessories Aluminiun Non Restrictor Models Low Pressure Aluminiun Restrictor Models TYPE REF 2 INLETS 1 OUTLET TYPE REF 2 INLETS 1 OUTLET 74-911/27 1/4 BSP(M) 1/4 BSP(F) 74-711/27 1/4 BSP(M) 1/4

18 Accessories Aluminiun Non Restrictor Models Low Pressure Aluminiun Restrictor Models TYPE REF 2 INLETS 1 OUTLET TYPE REF 2 INLETS 1 OUTLET /27 1/4 BSP(M) 1/4 BSP(F) /27 1/4 BSP(M) 1/4 BSP(F) /27 1/4 NPS(M) 1/4 NPS(F) /27 1/4 NPS(M) 1/4 NPS(F) /27 * 1/4 BPS(M) 3/8 BSP(F) /27 * 1/4 BSP(M) 3/8 BSP(F) /27 * 3/8 BSP(M) 3/8 BSP(F) /27 * 3/8 BSP(M) 3/8 BSP(F) /27 1/4 NPS(M) 3/8 NPS(F) /27 1/4 NPS(M) 3/8 NPS(F) /27 1/4 BSP(M) M16 x 1.5(F) /27 1/4 BSP(M) M16 x 1.5(F) /27 M16 x 1.5(M) M16 x 1.5(F) /27 M16 x 1.5(M) M16 x 1.5(F) Non Restrictor Models Stainless steel Low Pressure Stainless Restrictor Models TYPE REF 2 INLETS 1 OUTLET TYPE REF 2 INLETS 1 OUTLET /30 1/4 BSP(M) 1/4 BSP(F) /30 1/4 BSP(M) 1/4 BSP(F) /30 1/4 NPS(M) 1/4 NPS(F) * /30 1/4 NPS(M) 1/4 NPS(F) /30 1/4 BSP(M) 3/8 BSP(F) /30 1/4 BSP(M) 3/8 BSP(F) * /30 3/8 BSP(M) 3/8 BSP(F) /30 3/8 BSP(M) 3/8 BSP(F) /30 1/4 NPS(M) 3/8 NPS(F) /30 1/4 NPS(M) 3/8 NPS(F) /30 3/8 NPS(M) 3/8 NPS(F) /30 3/8 NPS(M) 3/8 NPS(F) /30 M16 x 1.5(M) M16 x 1.5(F) * /30 M16 x 1.5(M) M16 x 1.5(F) * Stock lines others to order LP Y Blocks LP 2 outlet air connector Y with ball valves 1/4 BSP(F) x 2 x 1/4 BSP(M) LP 3 outlet fluid Y connection, swivel nut 3/8 BSP(F)x3 x 3/8 BSP fixed incl 1 x 3/8 BSP plug

AAG-2000 Manual Air Assisted Airless Spray Gun

AAG-2000 Manual Air Assisted Airless Spray Gun 240 Bar MWP accepts TRI-A reversible kit 2 finger trigger fluid inlet filter included CE marked 1/4 BSP air & fluid connection AAG-2000 illustrated with TRI-A