FINISHING. Spray Guns

Transcription

1 FINISHING Spray Guns

2 Spray Finishing Technologies TECHNOLOGY & Finish Quality TECHNOLOGY FINISH QUALITY Air Spray - Delta Spray AIR SPRAY Atomisation through air pressure. Easy to use. Typically has 3 bar air pressure and about 1-2 bar fluid pressure at the gun. Fine and smooth finish. High quality decorative finish. HVLP - Delta Spray HVLP Atomisation through high volume but low air pressure. About 0,7 bar atomising air and 1-2 bar fluid pressure at the gun. Close to air spray, if using low flow rates. Airless - Silver Plus AIRLESS Hydraulic atomisation: directing fluid under high pressure through a controlled orifice. Fluid pressure up to 500 bar. Quickly applies high volumes of coatings with medium to coarse quality. Air-Assisted - Alpha /Alpha Plus AIR-ASSISTED Hybrid atomisation combining airless and air spray. Atomising air up to 3 bar and up to 200 bar fluid pressure. Between air spray and airless. Relatively smooth, but for higher material flow rates. Electrostatic - PRO Xs ELECTROSTATIC Spray of charged paint particles based on air spray or air-assisted technology. Typically up to 180 bar. Fine and smooth finish. Excellent film coverage and reduced overspray.

3 TYPICAL FLUIDS & Applications FLUIDS APPLICATIONS AIR SPRAY Low and medium viscosity fluids. Solvent borne and waterborne coatings, topcoats, wash coats, stains, clear coats, and adhesion promoters. Automotive, metal and wood decorative finishing. All operations that require superior finish quality. HVLP Low and medium viscosity fluids. Solvent borne and waterborne coatings, topcoats, clear coats. Wood and metal finishing for all kinds of parts and shapes. AIRLESS Medium to high viscosity fluids. More protective coatings, solvent borne and waterborne. Large surfaces like metal constructions, storage tanks, ships. AIR-ASSISTED For a large range of viscosities. Solvent borne and waterborne coatings, base coats, topcoats, clear coats. Wood furniture top coats, commercial vehicles like bus and truck. ELECTROSTATIC Low to medium viscosity fluids. Large range of fluids. Automobile, aircraft, truck and bus, wooden chairs and window frames. Spray Finishing Technologies

4 Graco Spray Guns MANUAL Guns Delta Spray Air Spray Features Max. Fluid Flow & Benefits Pressure Range Delta Spray - Air Spray 7 bar 0,12-1,05 l/min Ergonomic gun handle to reduce operator fatigue. Uniform and well balanced spray pattern. Can be converted from air spray to HVLP. Pressure feed, siphon feed, gravity feed gun models, SST construction. Delta Spray HVLP Silver Plus Airless Delta Spray - HVLP 7 bar 0,12-0,60 l/min Ergonomic gun handle to reduce operator fatigue. Uniform and well balanced spray pattern. Can be converted from HVLP to air spray. Pressure feed, pressure cup feed, gravity feed gun models, SST construction. Silver Plus 345 bar 0,20-26,66 l/min Ergonomic gun design. Patented needle design for longer life. SST construction with no adjustment needle for quick repair. Available with RAC tips for easy cleaning. Flex Plus Airless Flex Plus 345 bar 0,20-26,66 l/min Ergonomic gun design. Fluid hose connects direct to head of gun. SST construction with no adjustment needle for quick repair. Available with RAC tips for easy cleaning. Model 510 Airless Model bar 0,20-26,66 l/min Large fluid path with no spring in path (no material clogging). Patented needle design for longer life. Available with GHD RAC tip for easy cleaning. Contractor 248 bar 0,20-17 l/min In-handle paint filter and built-in hose swivel. SST gun fluid tube. Comfort grip handle. Contractor Airless

5 MANUAL Guns Alpha Spray Medium Pressure Air-Assisted Features Max. Fluid Flow & Benefits Pressure Range Alpha Spray 105 bar 0,10-0,80 l/min Designed for soft spray atomisation and easy flushing. SST construction with inlet filter. Small, lightweight and well balanced for operator comfort. Alpha Plus High Pressure Air-Assisted Alpha Plus 280 bar 0,10-3,4 l/min RAC tip design available to minimize downtime. SST construction, easy to flush. Light trigger pull and comfortable handle to reduce operator fatigue. Pro Xs2 Electrostatic Air Spray PRO Xs2 7 bar 0,10-1,5 l/min Easy installation without electrical connections. Size and weight comparable to a conventional air spray gun. Optional handle grip sizes. Excellent material savings with affordable investment. Pro Xs3 Electrostatic Air Spray PRO Xs3 7 bar 0,10-1,5 l/min Easy installation without electrical connections. Adjustable voltage at the gun. Available SMART version with showing voltage and current on the gun. 60 kv, 3 models: standard, high conductivity and waterborne coatings. PRO Xs4 7 bar 0,10-1,5 l/min Easy installation without electrical connections. Adjustable voltage at the gun. Available SMART version, showing voltage and current on the gun. 85 kv, compact and lightweight. Pro Xs4 Electrostatic Air Spray PRO Xs4 AA 207 bar 0,10-1,5 l/min Maximum material savings for hand held guns. Easy installation without electrical connections. Adjustable voltage at the gun. Available SMART version with showing voltage and current on the gun. 85 kv, compact and lightweight. Pro Xs4 AA Air-Assisted Electrostatic

6 Graco Spray Guns AUTOMATIC Guns Delta Spray Automatic Air Spray Features Max. Fluid Flow & Benefits Pressure Range Delta Spray Automatic - Air Spray 7 bar 0,12-1,35 l/min Modular design for easy installation and service. Small compact design for mounting flexibility. SST construction, convertible to HVLP. Delta Spray Automatic HVLP Delta Spray Automatic - HVLP 7 bar 0,12-0,72 l/min Modular design for easy installation and service. Small compact design for mounting flexibility. SST construction, high spray quality. AL Plus Automatic 280 bar 0,2-25,4 l/min Compact design with low cost of ownership. SST construction for durability and a high variety of coatings. Capable of high production speed. AL Plus Automatic Airless AA Plus Automatic 276 bar 0,2-2,2 l/min Compact design with easy-to-install needle cartridge. SST construction for durability and high variety of coatings. Excellent transfer efficiencies. AA plus Air-Assisted PRO AUTO Xs 7 bar 0,10-1,5 l/min Easy installation without electrical connections, adjustable voltage at the gun. Design for easy installation and removal for servicing. With protective hood. Max. 85 kv. Pro Auto Xs Electrostatic Air Spray PRO AUTO Xs4 AA 207 bar 0,10-1,5 l/min Easy installation without electrical connections, adjustable voltage at the gun. Design for easy installation and removal for servicing. With protective hood. Max. 85 kv. Pro Auto Xs4 AA Electrostatic Air-Assisted

7 YOUR Selection Less overspray = saves money + protects the environment Less material consumption Less waste Less spray booth cleaning Less energy cost for air and water make-up ATOMISATION VS. FLOW RATE CHART Very Coarse Coarse Atomisation Medium Fine HVLP Air Assisted Airless Airless Relative atomisation and typical flow rate comparison of atomisation methods. Air Spray Very Fine 0,3 l/min 0,7 l/min 1,5 l/min Spray Gun Application Rate (Flow) EXPECTED OVERSPRAY RATE AIR ATOMIZA- TION HYDRAULIC ATOMIZA- TION AIR SPRAY HVLP AIRLESS AIR ASSISTED AIRLESS ASTM : Measuring Method Variable overspray rate, depending on part size and shape. ELECTRO- STATIC SPRAY AIR SPRAY AIR ASSISTED AIRLESS ESTIMATED OVERSPRAY IN % Your Graco distributor can help you to select the right method and product for your application. Your Selection

8 Spray Guns ABOUT GRACO PROVEN QUALITY. LEADING TECHNOLOGY. Founded in 1926, Graco is among the leading group in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company s success is based on its unwavering commitment to technical excellence, world-class manufacturing and first-class customer service. Working closely with qualified distributors, Graco offers systems, products and technology which set quality standards in a wide range of fluid handling solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for the contractor industry. Graco s ongoing investment in fluid management and control will continue to provide innovative solutions to a diverse global market. GRACO HEADQUARTERS AMERICAS MINNESOTA Worldwide Headquarters Graco Inc th Avenue N.E. Minneapolis, MN MAILING ADDRESS P.O. Box 1441 Minneapolis, MN Tel Fax MICHIGAN Automotive Headquarters and Sales Office Halyard Drive Plymouth, MI Tel Fax EUROPE BELGIUM European Headquarters Graco N.V. Industrieterrein - Oude Bunders Slakweidestraat Maasmechelen, Belgium Tel Fax info@graco.be ASIA PACIFIC JAPAN Graco K.K Hayabuchi Tsuzuki-ku Yokohama City, Japan Tel Fax CHINA Graco Hong Kong Ltd. Representative Office, Room 118 1st Floor No. 2 Xin Yuan Building No. 509 Cao Bao Road Shanghai, P.R.China Tel Fax KOREA Graco Korea Inc. 3rd Fl., Doorim Bldg Poi-Dong, Kangnam-Ku Seoul, Korea Tel Fax All data in this document is based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Graco Inc. is certified ISO GRACO N.V. Industrieterrein Oude Bunders Slakweidestraat 31 B-3630 Maasmechelen Tel: +32 (89) Fax: +32 (89) info@graco.be Internet: Graco N.V. Form No E 10/02 Printed in Europe. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.

9 Delta Spray Ordering Information 1. Determine type of feed (Pressure, Siphon or Gravity). 2. Select material viscosity. 3. Select average flow rate. 4. Select pattern width. Delta Spray Air Spray Guns Gun Needle/ Orifice Pattern Material Usage: Assembly Nozzle Kit Size Width Viscosity Average Flow Part No. Part No. in (mm) in (mm) oz/min (lpm) Pressure Feed Guns: Air Spray Gun Assemblies (0.762) 15 (381) Light 4-12 ( ) (1.067) 17 (432) Light-Medium 8-20 ( ) (1.397) 17 (432) Medium ( ) (1.778) 18 (457) Medium-Heavy ( ) (2.184) 13 (330) Heavy ( ) (2.790) 11 (279) Heavy ( ) * * (1.067) 17 (432) Light-Medium 8-20 ( ) * * (1.397) 17 (432) Medium ( ) * * (1.778) 18 (457) Medium-Heavy ( ) Spatter or Specking Gun Assembly (1.067) N/A Light-Medium 8-20 ( ) Siphon Feed Guns: Air Spray Gun Assemblies (1.397) 10 (254) Light 4-10 ( ) (1.778) 10 (254) Light-Medium 8-12 ( ) Gravity Feed Guns: Air Spray Gun Assemblies (1.397) 9 (229) Light-Medium 4-10 ( ) (1.778) 9 (229) Light-Medium 8-12 ( ) Air Spray Gun and Gravity Cup Assemblies (1.397) 9 (229) Light-Medium 4-10 ( ) (1.778) 9 (229) Light-Medium 8-12 ( ) Air Spray Gun and Siphon Cup Assemblies Product Information (1.397) 10 (254) Light 4-10 ( ) (1.778) 10 (254) Light-Medium 8-12 ( ) * Stainless steel needle/tip Measured with gun nozzle 10 in (254 mm) from target surface. Optional Air Caps Air Cap Pattern Width** Part No. In. (mm) Type * Small, 12 (305) Air Spray Medium, 14 (356) Air Spray *** Large, 17 (432) Air Spray Low fluid pressure applications Air Spray Medium, 14 (356) Shading/SAP, 6 (152) HVLP * Recommended for stains ** Measured with gun nozzle 10 in. (254 mm) from surface *** Brass material construction

10 Delta Spray, continued Delta Spray HVLP Spray Guns Gun Needle/ Orifice Pattern Material Usage: Assembly Nozzle Kit Size Width Viscosity Average Flow Part No. Part No. in (mm) in (mm) oz/min (lpm) Pressure Feed Guns: HVLP Spray Gun Assemblies (0.762) 15 (381) Light 4-10 ( ) (1.067) 16 (406) Light-Medium 8-14 ( ) (1.397) 16 (406) Medium ( ) (1.778) 17 (432) Medium-Heavy ( ) (2.184) 17 (432) Heavy ( ) (2.790) 18 (457) Heavy ( ) * * (1.067) 16 (406) Light-Medium 8-14 ( ) * * (1.397) 16 (406) Medium ( ) * * (1.778) 17 (432) Medium-Heavy ( ) Gravity Feed Guns: HVLP Spray Gun Assemblies (1.397) 14 (356) Light-Medium 3-5 ( ) (1.778) 16 (406) Light-Medium 4-6 ( ) HVLP Spray Gun and Pressure Cup Assemblies (1.067) 16 (406) Light 4-10 ( ) (1.397) 16 (406) Light-Medium 6-12 ( ) (1.778) 17 (432) Medium 8-14 ( ) (2.184) 17 (432) Medium-Heavy ( ) HVLP Spray Gun and Gravity Cup Assemblies (1.397) 14 (356) Light-Medium 3-5 ( ) (1.778) 16 (406) Light-Medium 4-6 ( ) *Stainless steel needle/tip Measured with gun nozzle 10 in. (254 mm) from target surface. Accessories Air Whip Hose Assembly Length: 4 ft (1.22 m). ID: 5/16 in (7.94 mm) Fluid Whip Hose Assembly Length: 4 ft (1.22 m). ID: 3/16 in (4.76 mm) Air Control Valve Kit Gravity Cup Kit, 8 oz (237 cc) Gravity Cup Kit, 16 oz (474 cc) Air Spray Siphon Cup, 1 Pt (0.48 l) Air Spray Siphon Cup, 1 Qt (0.95 l) HVLP Shading/SAP Air Cap, 6 in (152 mm) Air Pressure Verification Kit Orifice Size in inches (mm) , 0.042, (0.762, 1.067, 1.397) , (1.778, 2.184) (2.790) Gravity SST Pressure Cup, 1 Qt (0.95 l), with Single Air Regulator and Pressure Relief Valve SST Pressure Cup, 1 Qt (0.95 l), with Double Air Regulator and Pressure Relief Valve Remote SST Pressure Cup, 1 Qt (0.95 l) with Air Regulator SST Pressure Cup, 1 Qt (0.95 l), Cup Only

11 Alpha Spray Guns Carbide models recommended for: pigmented, waterborne and higher viscosity materials. Composite models recommended for: acid-catalyzed materials and low viscosity lacquers and stains. Standard Alpha Spray Gun* Carbide Model Configured with carbide ball and seat Composite Model Configured with composite ball and seat. HVLP Alpha Spray Gun* Carbide Model Configured with carbide ball, seat and HVLP air cap Composite Model Configured with composite ball, seat and HVLP air cap. Accessories Alpha AA HVLP Air Cap Converts standard gun to HVLP compliancy. Requires HVLP verification kit HVLP Verification Kit For use in checking air cap air pressures at various supply air pressures. *GGW spray tip of choice included with Alpha Gun. Alpha Plus Spray Guns Alpha Plus Spray Gun* Alpha Plus Hi-Flow Spray Gun* Recommended with tips larger than.025" and other high flow applications Alpha Plus HVLP Spray Gun* Standard spray gun with HVLP compliant air cap Alpha Plus Reverse-A-Clean (RAC) Spray Gun* Spray gun with AA Reverse-A- Clean assembly to reduce frequent tip plugging. Accessories Alpha Plus HVLP Air Cap Converts standard Alpha Plus users to HVLP compliancy HVLP Verification Kit For use with air cap only, to determine air pressure behind the air cap Reverse-A-Clean Conversion Kit Converts gun with standard spray tip, tip guard and air cap to RAC gun Alpha Plus Reverse-A-Clean (RAC) Hi-Flow Spray Gun* Hi-Flow spray gun with Reverse-A- Clean assembly. *GG4xxx or 242xxx spray tip of choice included with Alpha Plus gun.

12 Silver plus Manual Gun Silver Plus with NanaTite Tip Guard and 517 RAC 5 SwitchTip, 2-Finger Trigger Silver Plus with HD Guard Tip Includes GHD SwitchTip, 2-Finger Trigger Silver Plus with HD Guard Tip Includes GHD SwitchTip, 4-Finger Trigger Silver Plus with DripLess Flat Tip Guard, 2-Finger Trigger Spray tip not included, order separately Silver Plus with HD Tip Guard, 2-Finger Trigger with 4-Finger Fluid Tube for improved gloved hand access Silver Plus with DripLess Flat Tip Guard, 4-Finger Trigger. Spray tip not included, order separately Silver Plus with DripLess Flat Tip Guard, in. (0.94 mm) pre-orifice for fine finish. Spray tip not included, order separately Silver Plus Gun Repair Kit Silver Plus Gun Repair Kit for model Model Model 510 Includes a Heavy-Duty 510 RAC 5 Tip Guard and size 619 SwitchTip. Accessories Needle and Seat Kit Repair Kit Fluid orifice size: in. (2.3 mm). Comes standard with the Model 510 gun. Includes valve seat, gasket, needle, seal retainer and seal Gun Hose Swivel Maximum working pressure: 7400 psi (51.0 MPa, 510 bar). 1/4 npsm(f) x 1/4 npt(m) Optional Non-Diffused Needle and Seat Conversion/Repair Kit Fluid orifice size: 1/8 in. (3.2 mm). Recommended only for use with mastics, sealers and other high viscosity materials which have fillers that cannot pass through the standard seat diffuser HD RAC Tip Retainer Maximum working pressure: 7400 psi (51 MPa, 510 bar). Fits guns with 7/8 in. (22.2 mm) thread. Included as part of Model 510 gun.

13 Flex Plus Flex Plus Gun Includes Flat Tip DripLess Guard and 2-Finger Trigger. Spray tip not included Flex Plus Gun Includes 517 RAC 5 SwitchTip, HandTite Tip Guard and 2-Finger Trigger. Accessories Flex Plus Gun Hose Kit Flex Plus Gun with 517 RAC 5 SwitchTip and HandTite tip guard, 3 ft. (0.9 m) whip hose, 1/4 in. (6.3 mm) x 50 ft. (15.2 m) airless hose. Contractor Gun Contractor Gun Includes 517 RAC 5 SwitchTip and HandTite tip guard Optional 4-Finger Trigger For Contractor gun. Accessories Filters Gun Filter Assembly, 50 mesh Gun Filter Assembly, 100 mesh (149 micron) Gun Filter Screen Element, 50 mesh (300 micron) Gun Filter Screen Element, 100 mesh (149 micron) Tools Wrench Fits all hexes on the gun. Nylon Brushes Use to thoroughly clean the gun s fluid passages /8 in. (9 mm) diameter /8 in. (16 mm) diameter Hoses and Swivels Gun Hose Swivel Maximum working pressure: 3600 psi (24.8 MPa, 248 bar). 1/4 npsm(f) x 1/4 npt(m) Contractor Gun Hose Kit Includes Gun, RAC 5 SwitchTip, HandTite tip guard, 1/4 in. x 50 ft. (6.3 mm x 15.2 m) BlueMax airless hose and 3 ft. (0.9 m) whip hose Contractor Gun Hose Kit Includes gun, RAC 5 SwitchTip, HandTite tip guard, 3/8 in. x 50 ft. (9.5 mm x 15.2 m) airless hose and 3 ft. (0.9 m) whip hose. Tip Guards Flat Tip Guard 7/8"(f) for Standard Tip Flat Tip Guard 7/8" (f) for Fine Finish Tip Heavy-Duty RAC DripLess Tip Guard Filter/Swivel HandTite Tip Guard

14 PRO Xs Guns PRO Xs2 Gun includes 1.5 mm nozzle, air cap. Grounded air hose must be ordered separately PRO Xs3 for Standard Coatings Gun includes 1.5 mm nozzle and air cap PRO Xs3 Smart Gun for Standard Coatings Includes Smart Display showing voltage and current at the gun, adjustable voltage, 1.5 mm nozzle and air cap PRO Xs3 High Conductivity Coatings Gun includes 1.5 mm nozzle and air cap PRO Xs3 Smart Gun for High Conductivity Coatings Includes Smart Display showing voltage and current at the gun, adjustable voltage, 1.5 mm nozzle and air cap PRO Xs3 for Waterborne Coatings Gun includes 1.5 mm nozzle and air cap. Waterborne fluid hose must be ordered separately (includes fluid tube and gun fittings) PRO Xs3 Smart Gun for Waterborne Coatings Includes Smart Display showing voltage and current at the gun, adjustable voltage, 1.5 mm nozzle and air cap. Waterborne fluid hose must be ordered separately (includes fluid tube and gun fittings) Waterborne PRO Xs3 Gun Kit PRO Xs3 gun with 7.6 m (25 ft.) waterborne fluid hose Waterborne PRO Xs3 Gun Kit PRO Xs3 Smart gun with 7.6 m (25 ft.) water borne fluid hose PRO Xs4, Standard Gun includes 1.5 mm nozzle and air cap PRO Xs4, Smart Includes Smart Display showing voltage and current at the gun, adjustable voltage, 1.5 mm nozzle and air cap PRO Xs4, Air-Assisted, Standard Includes tip of choice when ordering.

15 PRO Xs4, Air-Assisted, Smart Includes Smart Display showing voltage and current at the gun, adjustable voltage and tip of choice when ordering PRO Auto Xs for Standard Coatings Includes gun shroud, mounting bracket, gun manifold and gun with 1.5 mm fluid nozzle and air cap PRO Auto Xs for High Conductivity Coatings Includes gun shroud, mounting bracket, gun manifold and gun with 1.5 mm fluid nozzle and air cap PRO Auto Xs for Waterborne Coatings Includes gun shroud, mounting bracket, gun manifold and gun with 1.5 mm fluid nozzle and air cap. Waterborne fluid hose must be ordered separately (includes fluid tube and gun fittings) PRO Auto Xs AA Includes gun, shroud, mounting brackets, gun manifold and gun with tip of choice. Accessories for PRO Xs Guns (all types) Grounded Air Hoses (required for use) Length Air Flex Standard Waterborne* 1.8 m (6 ft.) m (15 ft.) m (25 ft.) m (36 ft.) m (50 ft.) m (75 ft.) m (100 ft.) Gun Covers (box of 10) For PRO Xs2 gun Gun Covers (set of 10) For PRO Xs3, PRO Xs4 and PRO Xs4 AA guns Gun Covers (box of 10) For PRO Auto Xs guns. Select Comfort Grips Snap-on grips to increase the handle size to reduce operator fatigue Medium Grip Kit Large Grip Kit Cleaning Brush

16 Accessories for Air Spray PRO Xs Guns Round Pattern Kits Consists of fluid tip, diffuser and air cap mm (4-6 in.) diameter mm (8-10 in.) diameter Fluid Hose /4 in. ID x 7.6 m (25 ft.) /4 in. ID x 15.2 m (50 ft.) Waterborne Fluid Hose 7.6 m (25 ft.) fluid hose. Used only with PRO Xs3 waterborne guns l (1 Quart) Remote Pressure Cup Includes air regulators for both gun atomization and supply air to the pressure cup l (2 Quart) Remote Pressure Cup Includes air regulators for both gun atomization and supply air to the pressure cup. Accessories for Air-Assisted PRO Xs Guns PRO Xs4 AA Round Spray Kit (manual guns) Round spray provides a higher level of performance to electrostatic spraying. Includes tip of choice PRO Auto Xs AA Round Spray Kit Round spray provides a higher level of performance to electrostatic spraying. Includes tip of choice. Part No. Pattern Flow Rate Width at 40 bar at 80 bar mm (9 in.) 120 cc/min. 170 cc/min mm (10 in.) 150 cc/min. 220 cc/min mm (10 in.) 160 cc/min. 230 cc/min mm (14 in.) 230 cc/min. 330 cc/min mm (13 in.) 270 cc/min. 420 cc/min mm (12 in.) 350 cc/min. 530 cc/min mm (11 in.) 480 cc/min. 700 cc/min. Fluid Hose /4 in. ID x 7.6 m (25 ft.) /4 in. ID x 15.2 m (50 ft.)

17 Air Spray Delta Auto Guns A manifold is required for each gun to be installed. Gun Needle/ Assembly Nozzle Kit Air Cap** Orifice Part No. Part No. Part No. Size in. (mm) (0.762) (1.067) (1.397) (1.778) N/A (2.184) N/A (2.790) * * (1.067) * * (1.397) Pattern Material Usage Length*** Viscosity Average Flow in. (mm) oz./min. (lpm) 15 (381) Light 4-12 ( ) 17 (432) Light-Medium 8-20 ( ) 17 (432) Medium ( ) 18 (457) Medium-Heavy ( ) 13 (330) Heavy ( ) 11 (279) Heavy ( ) 17 (432) Light-Medium 8-20 ( ) 17 (432) Medium 8-20 ( ) *Stainless steel needle tip **Large pattern air caps can be replaced with optional air caps for alternate spray patterns. *** Measured with gun nozzle 10 in. (254 mm) from target surface Manifolds A manifold is required for each gun to be installed Manifold with bottom fluid ports Manifold with side fluid ports Manifold with manual fan control with side fluid ports

18 HVLP Delta Auto Guns A manifold is required for each gun to be installed. Gun Needle/ Assembly Nozzle Kit Air Cap** Orifice Part No. Part No. Part No. Size in. (mm) (0.762) (1.067) (1.397) (1.778) N/A (2.184) N/A (2.790) * * (1.067) * * (1.397) Pattern Material Usage Length Viscosity Average Flow in. (mm) in. (mm) oz./min. (lpm) 15 (381) Light 4-10 ( ) 17 (432) Light-Medium 8-14 ( ) 17 (432) Medium ( ) 18 (457) Medium-Heavy16-20 ( ) 17 (432) Heavy ( ) 18 (457) Heavy ( ) 17 (432) Light-Medium 8-14 ( ) 17 (432) Medium ( ) * Stainless steel needle tip ** Large pattern air caps can be replaced with optional air caps for alternate spray patterns. *** Measured with gun nozzle 10 in. (254 mm) from target surface Manifolds A manifold is required for each gun to be installed Manifold with bottom fluid ports Manifold with side fluid ports Manifold with manual fan control with side fluid ports

19 AA Plus Automatic Guns A manifold is required for each gun to be installed. All models include an internal filter Standard Gun Includes standard needle with 3.1 mm carbide ball (239794) and standard diffuser seat (224855), standard air cap (239781) and GG5 tip Acid Catalyst Gun Specially designed to handle low viscosity and/or acid-catalyzed materials. Includes a needle with 3.1 mm plastic ball (239808) and standard diffuser seat (224855), standard air cap (239781) and GG5 tip HVLP Gun Includes standard needle (239794) and standard seat (224855), HVLP air cap (239898), and GG5 tip Hi-Flow Spray Gun Includes needle with 4.7 mm carbide ball (239807), seat (239806). Air cap and tip not included AA Reverse-A-Clean (RAC) Gun Includes standard needle (239794) with the AA RAC diffuser seat (239173), AA RAC air cap (238701) 242 tip. Manifolds A manifold is required for each gun to be installed Standard 1/4-18 npsm inlets European #5 JIC inlets Manifold with manual fan control 1/4-18 npsm inlets Airless Auto Gun Includes GGO precision spray tip of choice Airless Gun Manifolds A manifold is required for each gun to be installed Standard 1/4-18 npsm inlets European #5 JIC inlets Accessories Air Seal Repair Kit Fluid Seal Repair Kit Filter Kit 10 internal filters (193413) Triggering Speed Cylinder Fluid Air Pressure Pressure msec msec psi (MPa, bar) psi (MPa, bar) to fully open to fully close 70 (0.49, 4.9) 600 (4.2, 42) (0.49, 4.9) 1800 (12.4, 124) (0.49, 4.9) 4000 (28, 280) 69 73

20 Product Literature Part Number Description Available Languages DELTA Spray Guns, Airspray and HVLP E/F/G/I/S/H/U/D ALPHA AA Gun E/F/G/I/S/H/U/D/B/N ALPHA PLUS AA Gun E/F/G/I/S/U SILVER PLUS Gun E PRO Xs Electrostatic Guns E/F/G/I/S/H/U/B Auto Airless Gun Manual E/F/G AA Auto Gun Manual E/F/G HVLP/Air Spray Delta Auto Guns E/F/G Contractor Gun Manual E/F/G Airless Gun 510 Manual E/F/G Flex Airless Gun Manual E/F/G E = English F = French G = German I = Italian S = Spanish H = Dutch U = Swedish B = Finnish D = Danish N = Norwegian The Product Information included in this document is only a selection of the Graco Finishing Product Range. Contact your local distributor for more detailed information Graco Inc. Form No E Rev.A 10/02 Printed in Europe. All data in this document is based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Graco N.V. - Industrieterrein Oude Bunders - Slakweidestraat 31 B-3630 Maasmechelen Tel: +32 (89) Fax: +32 (89) info@graco.be - Http//: