L182. Modular Wine Rack

Transcription

1 L182 Modular Wine Rack

2 Features Powered by remote dimmable (DC) LED drivers (consult factory) 1W LED per arm Accessories available for customization Adjustable bottle holder brackets fit multiple bottle sizes Single or double bottle holder bracket options Durable matte black anodized finish Can be used in cold temperature (ex. refrigerator) Rail is field cuttable and can be mounted on various types of wall finishes or mounted freely from ceiling to floor. Field exchangeable modules Removable connectors and end caps for easy maintenance Adjustable Bottle Holder Bracket Half/Full Shroud Removable End Cap

3 L182 CROSSBAR OPTIONS 1A Single neck view 2A Double neck view 1B Single front view 2B Double front view

4 Freestanding mounting options Mounting Brackets WR- MB (require on top and bottom of rail for free standing mounting)

5 Wall Mounted mounting options

6 Dimension Wall mount option 9-1/4 235mm 1 25mm top arm module (L182T) adjustable** 1-1/4 32mm double neck view Top, middle, and bottom arm modules are adjustable to custom length mounting rail adjustable 5-7/8 149mm LED not available on bottom arm module Recommended spacing is 9 (229mm) between arm modules For full specs go to spec/l/l182_spec.pdf middle arm module (L182M) 3-1/2 89mm single neck view botton arm module (L182B) 1-1/4 32mm custom length mounting rail

7 9-1/4 (235mm) 1-1/4 (31.75mm) Dimension Freestanding option Ceiling LED 5-7/8 ( mm) Top, middle, and bottom arm modules are adjustable to custom length mounting rail LED not available on bottom arm module Recommended spacing is 9 (229mm) between arm modules For full specs go to Maximum 120 (3048mm) custom length rail Height of arm module is adjustable along the rail spec/l/l182_spec.pdf 3-1/2 (89mm) Position of brackets is adjustable on arm module Floor 1 (25.4mm) Mounting bracket (WR-MB)

8 Installation modular wine rack For more information go to com/pdf/installation/l/l182_inst.pdf 1 Drill holes and mount rail to wall or support structure (recommended spacing every 2 ). Note: To ensure proper support, it is recommended to use a wall anchor, supplied by others Insert wire leads and arm module. Turn arm module 90 and lock setscrew with Allen key. Trim rail cover to appropriate size and fit into place. Rail Rail Cover Setscrew & Cover Bars Screws L182 Installation Instructions 5 Install bars for holding wine bottle. 6 Connect fixture wires to low voltage wiring (remote LED driver 350mA constant current). Wire Leads LED Arm Module Parts Qty. Rail 1 LED arm module 1 Bars 2 Cross countersunk screws 4 Wire connectors 2 Rail cover 1 Setscrew & cover 1 Tools Phillips screwdriver not included To Power Supply CAUTION Read all instructions. WARNING: RISK OF FIRE OR ELECTRICAL SHOCK: Do not make or alter any openings in the compartment of wiring or electrical components during installation. Do not alter or add ballasts, or any other electrical components. Installation and use of this fixture mounting assembly requires a person familiar with the construction and operation of luminaire

9 Order Guide How to order top arm module (L182T) There are 4 components that needs to be considered when ordering the L182 Wine Rack. Rail (RAL182) Top arm module (L182T) Middle arm module (L182M) Bottom arm module (L182B) Mounting Bracket *optional (WR-MB) middle arm module (L182M) botton arm module (L182B) custom length mounting rail (RAL182) Mounting Bracket *optional (WR-MB)

10 Order Guide How to order Rail comes with rubber cover. CODE LENGTH FINISH RAL BA Top Arm Module has LED and no cross bars. CODE COLOR BEAM ACCESSORIES INPUT VOLTAGE FINISH L182T - - BA rail X = custom by foot * maximum recommended height 9FT(2.7m) BA = black anodized top arm W22S = 2200K, 80+CRI W27S = 2700K, 80+CRI W30S = 3000K, 80+CRI W30H = 3000K, 90+CRI S = spot (12 ) N = narrow flood (30 ) W = wide flood (120 ) NA = no accessory FS = full shroud HS = half shroud D = DC A = 12V AC *12V AC only available for W27S & W30S BA = black anodized Middle Arm Module has LED and cross bars. Crossbar Options CODE COLOR BEAM ACCESSORIES INPUT VOLTAGE CROSS BAR FINISH L182M - - BA middle arm W22S = 2200K, 80+CRI W27S = 2700K, 80+CRI W30S = 3000K, 80+CRI W30H = 3000K, 90+CRI S = spot (12 ) N = narrow flood (30 ) W = wide flood (120 ) NA = no accessory FS = full shroud HS = half shroud D = DC A = 12V AC *12V AC only available for W27S & W30S 1A = single neck view 2A = double neck view 1B = single front view 2B = double front view BA = black anodized 1A Single neck view 1B Single front view Bottom Arm Module has cross bars and no LED. CODE CROSS BAR FINISH L182B - - BA top arm module (L182T) 2A Double neck view Accessory 2B Double front view bottom arm 1A = single neck view 2A = double neck view 1B = single front view 2B = double front view Mounting bracket is optional. Used only for mounting from ceiling to floor BA = black anodized middle arm module (L182M) CODE FINISH WR-MB - BA botton arm module (L182B) mounting bracket BA = black anodized custom length mounting rail (RAL182) Mounting Bracket *optional (WR-MB) WR-MB mounting Bracket

11 Application Photos

12 Tamarind Tribeca New York, NY

13 Tamarind Tribeca New York, NY

14 Shangri La Hotel Toronto, ON

15 Shangri La Hotel Toronto, ON

16 16 West 4th Ave Vancouver BC V5Y 1G3 Canada t f tf sales@mplighting.com Copyright 2017 MP Lighting