FIXTURES - FLEXIBLE (Q - CAP) LENS ENC/CL ENC/CL S1 S2 S3 S4 P1 P2 P3 P4 2. Pass through

Transcription

1 BOXA-RGB FIXTURES - FLEXIBLE (Q - CAP) COMPLIANT BOXA-RGB Voltage: 4 VDC Wattage:.8 W/Ft WSC DRY Per Channel RLC WET 5.3 W/Ft MC Total Load CCT OUTPUT LENS RGB SO ENC/CL RGB SO ENC/CL END CAPS (NO FEED) LENGTH (IN) BW *SGC PPS ENCAPSULATED PRODUCTS ARE NOT FIELD CUTTABLE increments from -9 S S S3 S4 S5 P P P3 P4 P5 PPS-96 *White Snug Clip included with Side Graze Channel NOTES: CONNECTOR/ WIRE OUT CONNECTOR/ WIRE IN TYPE Single (Closed exit) RATED MOUNTING Pass through PRODUCT BW N/A BW CL Tolerance +"/-cutpoint for installed product" WH N/A BW Custom Bare Wire length up to - request different length by writing it in inches next to BW in the order code box Seamless must use PPS mounting clip Field modifications are not covered under Q-Tran warranty Data subject to change, all data has +/- 5% tolerance OUTPUT Tested for BOXA-RGB-WSC-DRY LENS with LED visibility ENC/CL SO SO CONNECTOR/WIRE OUT CONNECTOR/WIRE IN BW BW Standard Output Output Standard ENC/CL Wavelength lm/ft CCT Red Green Blue All Circuit Wattage Bare Wire 4 Encapsulated in Clear Bare Wire 4 TYPE MOUNTING NOTE: clips provided per first, clip provided per additional foot WSC RLC MC White Snug Clip Rigid Lock Channel Magnetic Clip (Cove use only) QTY: QTY: PPS Side Graze Channel QTY: QTY: P3 Out P4 P4 Out Seamless S4 SEAMLESS END CAPS (NO FEED) Shown with Bare Wire, connectors vary Light Source DIMENSIONS CL END CAPS (WITH FEED) End Feed WH Tri-Directional S, P...53 S, S3, S4, P, P3, P4.48" Light Source Up/Down Bend 6 Bending Radius Profile (Seamless Bare Wire) PRO JECT NAME 8 Q-Tran c. 4.5 DATE 55 Hill St. Milford, CT CLEAR ENDCAPS Omnidirectional Wireways S5, P5. added at end." dim spot COMPAN Y WHITE ENDCAPS. added at end." dim spot T YPE " Profile (Standard) P5 ORDER EXAMPLE FLEXIBILITY.53 S5 Seamless P4 Out Out PVC Channel P Out PVC Mount Clip P S4 PASS THROUGH (put/output) QTY: PPS-96. S3.85 QTY: S.5. S SINGLE (put only) SGC " WHITE ENDCAPS. added at end.48" dim spot WHITE ENDCAPS.3 added at end.68" dim spot NOTE Rev - 3 -

2 RESOURCE GUIDE - MOUNTING MOUNTING NOTE: clips provided per first ", clip provided per additional foot WHITE SNUG CLIP - Surface mounting - Stainless Steel/Corrosion resistant - Discrete mounting - White glossy finish RIGID LOC CLIP - Heavy Duty surface mounting - Stainless Steel/Corrosion resistant - Vandal resistant - Retainer Clip provided - White glossy finish #6-5/8" (one provided for each clip) - 83 Silicone (sold separately) - #6-5/8" (one provided for each clip) - 83 Silicone (sold separately) - 5/64 Allen ey MAGNETIC CLIP - Steel clip - Neodymium magnet - Easy install - Easily detachable - COVE USE ONLY - White glossy finish SIDE GRAZE CHANNEL - Surface mounting - Stainless Steel/Corrosion resistant - For wall grazing - Hidden screw feature - White glossy finish - White Snug Clip provided #6 - /4" (one provided for each clip) - 83 Silicone (sold separately) - #6-5/8" (one provided for each clip) - 83 Silicone (sold separately) PVC MOUNT CLIP - Surface mounting - For joining seamless fixtures - Pool & Spa rated - White matte finish - Wire way feature - Notched feature for feeding cables PVC MOUNT CHANNEL - Surface mounting - For joining seamless fixtures - Pool & Spa rated - Field modifications made easy - White matte finish - Wire way feature #6-5/8" (one provided for each clip) - 83 Silicone (sold separately) 8 Q-Tran c. 55 Hill St. Milford, CT #6-5/8" (one provided for each clip) - 83 Silicone (sold separately) Rev--

3 RESOURCE GUIDE - MOUNTING MOUNTING ACCESSORIES Q-ANGLE (Full ordering guide and installation available for this product) - Offset lighting to illuminate signs, artwork, etc. - Wall, ceiling, or floor mounted - Stainless Steel/Corrosion resistant - Free moving rotating head which can be locked into specific angles - Preset dial notches for easy adjustments from 6 to 3 9 BAC VIEW 8 BAC VIEW BASE; BOT TOM VIEW.95" - Rigid Lock Clip Fillister head screw Flat head screw - Drywall anchor (not provided) - #6 Wood screw - 5/64 Allen ey.63" 3.".3".38".5".5".93" Q-ANGLE MUST BE MOUNTED EVERY " SEE RLC INSTALL AND Q-ANGLE INSTALL FOR MORE INFORMATION RIGID LOC CLIP - Heavy Duty surface mounting - Stainless Steel/Corrosion resistant - Vandal resistant - Retainer Clip provided - White glossy finish.84.. FINISHED ASSEMBLY - #6-5/8" (one provided for each clip) - 5/64 Allen ey 8 Q-Tran c. 55 Hill St. Milford, CT Rev--

4 RESOURCE GUIDE - LINEAR RATED COMPATIBLE CONNECTORS DRY - Lengths up to 9" - Encapsulated in Polyurethane - NOT FIELD CUTTABLE Bare Wire (BW) 4".53.7 COMPATIBLE CONNECTORS WET - Lengths up to 9" - Encapsulated in Polyurethane - NOT FIELD CUTTABLE Bare Wire (BW) 4" Q-Tran c. 55 Hill St. Milford, CT Rev--

5 RESOURCE GUIDE - COLOR DATA -DRY TM3 Rg: 95.5 R3 R4 R5 R6 R7 R8 Q U:.68 Q3 Q4 Q5 Q6 R R R R3 R4 R5 Q7 Q8 Q948 Q Q Q Q3 Q4 Q C C3 C4 C5 C6 C7 C8 C9 C C C Δuv: 5 C C3 C4 C5 C Hue Bin TM3 Chroma Hue Hue Bin TM3 Chroma Hue 6 49 TM3 : CRI R9: TM3 Rg: CQS: X:.643 R Y:.95 Q R3 R4 R5 R6 R7 R8 R9 R R R R3 R4 Q Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q Q Q Q3 Q4 Q5 47 C C C4 C5 C6 C7 C8 C9 C C C C3 C4 C5 C R5 C3 46 Δuv: n/a CIE 93 Zoom R V:.337 Rg 45 U: CRI: RED V:.3 Q R R 57 R Y:.34 CIE 93 Zoom X:.75 Rg 56 CQS: TM3 : 47.8 Hue 5% -% -45% -37% -9% % 6% 8% 6% -% -9% -9% 4% 3% 37% 9% CRI R9: -68. TM3 Chroma 34% 7% % -5% -34% -4% 3% 7% 9% 9% % -6% -8% -5% 5% 5% CRI: Hue Bin ALL R9 R R R R3 R4 Q Q Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q Q Q Q3 Q4 Q5 U: 55 V:.378 R5 C C C3 C4 C5 C6 C7 C8 C9 C C C C3 C4 C5 C6 7 CRI R values, only R-R8 are used to calculate RA CRI values TM3 C values, 6 binned values out of total of 99 C values CQS Q values Data subject to change, all data has +/- 5% tolerance 8 Q-Tran c. 55 Hill St. Milford, CT NOTES: 6 Δuv: n/a Rev-- 59 R8 R7 58 R6 R5 57 R4 R3 7 R R Y: X:.5 CIE 93 Zoom 4 Rg 5 CQS: TM3 Rg: TM3 : 55 CRI R9: 56 CRI: GREEN

6 48 CRI R9: CQS: Rg CIE 93 Zoom X:.4 R R R3 R4 R5 R6 R7 R8 R9 Y: 86 Q Q Q3 Q4 Q5 Q6 Q7 Q8 Q9 Q Q Q Q3 Q4 Q5 U:.49 V:.38 Δuv: n/a NOTES: R R R R3 R4 R5 C C C3 C4 C5 C6 C7 C8 C9 C C C C3 C4 C5 C6 Hue Bin TM3 Chroma Hue CRI R values, only R-R8 are used to calculate RA CRI values TM3 C values, 6 binned values out of total of 99 C values CQS Q values Data subject to change, all data has +/- 5% tolerance 8 Q-Tran c. 55 Hill St. Milford, CT Rev TM3 Rg: 3 BLUE TM3 : CRI: RESOURCE GUIDE - COLOR DATA -DRY

7 RESOURCE GUIDE - LUMEN MULTIPLIER SINGLE (put only) S S S3 S4 Tested for BOXA-RGB-WSC-DRY-X-SO-ENC/CL Lumen Multiplier: ENC/TL =.8 S5 END CAPS (NO FEED) Seamless CL END CAPS (WITH FEED) PASS THROUGH (put/output) P P P3 End Feed WH P5 S, S3, S4, P, P3 P4.48".48.. P4 Tri-Directional S, P.7.7 Seamless WHITE ENDCAPS. added at end. added at end ".7 WHITE ENDCAPS CLEAR ENDCAPS " added at end.7.7 WHITE ENDCAPS.3 added at end * Lengths change per SINGLE (put only) and PASS THROUGH (put/output) selection. Add the following dimension to each side of Nominal Length to find Actual Length: S,P:.48" S,P:.68" S3,P3:.68" S4,P4:.68" S,S,S3,S4:." S5,P5:." SO Nominal Length (in)* Standard Output LM CRI -6 Watts NOTES: Data applies to factory built fixtures Data subject to change, all data has +/- 5% tolerance For Highlighted Cells above red line, these is no noticable lumen difference across length. For under red line is longer lengths, a visible difference can be seen. 8 Q-Tran c. 55 Hill St. Milford, CT Rev--

8 RESOURCE GUIDE - FLEXIBLE FIXTURES LENS LIGHT ORIENTATION ENC/CL Encapsulated in Clear SYMMETRICAL CONNECTORS Bare Wire (BW) 4" TYPE S - put only P - put/output BW 4 BW 4 BW 4." added at end S - put only P - put/output BW 4 BW 4 BW 4.3" added at end S3 - put only P3 - put/output BW 4 BW 4 BW 4.3" added at end 8 Q-Tran c. 55 Hill St. Milford, CT Rev--

9 RESOURCE GUIDE - FLEXIBLE FIXTURES S4 - put only P4 - put/output BW 4 BW 4 BW 4.3" added at end SEAMLESS Order the PVC Mount Clip to join two fixtures together with no visible break and order the PVC Mount Channel to support the fixtures All seamless fixtures have CLEAR endcaps SEAMLESS WITH BARE WIRE S5 - put only P5 - put/output BW 4 BW 4 BW 4." added at end.4" added to fixture height 8 Q-Tran c. 55 Hill St. Milford, CT Rev--

10 RESOURCE GUIDE - CONNECTORS/WIRE CONNECTORS/WIRE BARE WIRE - Belden Wire RELATED PRODUCTS - Outdoor rated Q-mini-J* - 4" Standard length Sold: dividually.4" Junction Box that allows for splicing of LED Lead wires *Full ordering guide available for this product 8 Q-Tran c. 55 Hill St. Milford, CT Rev--

11 INSTALLATION FIXTURES - FLEXIBLE - BOXA WHITE SNUG CLIP NOTE: White Snug Clip spacing every 8" on center..8" INCLUDED HARDWARE.63" #6x5/8 Flat Head Screw ".75 Mount White Snug Clip with provided flat head screw " Align fixture to White Snug Clips matching distances. Press fixture into White Snug Clips. MAGENTIC CLIP INCLUDED HARDWARE..8" NOTE: Magnetic Clip spacing every 8" on center 8".63".7.77 #6x5/8 Flat Head Screw.5 stall magnet rings with provided flat head screw.. 3. Attach Clips to fixture matching magnet distances. 8 Q-Tran c. 55 Hill St. Milford, CT 646 Align and snap fixture to magnetic rings Rev-6-4

12 INSTALLATION FIXTURES - FLEXIBLE - BOXA RIGID LOC CHANNEL INCLUDED HARDWARE..8" NOTE: Rigid Lock Channel spacing every 8" on center.63".84. #6x5/8 Flat Head Screw. 8" #8-3 Set Screw 5/64 Allen ey Mount Rigid Lock Channel with provided flat head screw Push Retainer Clip onto fixture. Push fixture with Retainer Clip into Rigid Lock Channel. Tighten Set Screw to lock fixture in Channel for extra security. SIDE GRAZE CHANNEL INCLUDED HARDWARE..8" NOTE: Side Graze Channel spacing every 8" on center.63".4.85 #6x5/8 Flat Head Screw. #6x.5 Flat Countersunk Trim Head Tapping Screw stall Side Graze Channel with provided #6x5/8Flat Head Screw.. 3. Snap screw cover onto Side Graze Channel to hide screws. Press fixture into Side Graze Channel. 8 Q-Tran c. 55 Hill St. Milford, CT Rev-6-4

13 INSTALLATION FIXTURES - FLEXIBLE - BOXA PVC MOUNT CLIP & PVC CHANNEL INCLUDED HARDWARE....5"..86.8".5" #6x¼ Flat Head Screw PPS PPS-96 Connects two fixtures Field modifiable Press both fixtures into PPS clip.. 3. " or more Cut PPS-96 to any length, no smaller than ". stall PPS Clips to Pre mount backer board. Snap fixture into PPS and PPS-96. Power Supply Finished Assembly for straight runs Finished Assembly for curved application 8 Q-Tran c. 55 Hill St. Milford, CT Rev-6-4