Specials Spring/Summer 14/15

Transcription

1 Specials Spring/Summer 14/15 EUROPEAN QUALITY TOOLS 1/2 DRIVE POWERFUL MINI IMPACT WRENCH, 850 NM HAZET 9012M very powerful and at the same time also extremely compact (only 113 mm long) for working in areas with restricted access max loosening torque 850 Nm, max. tightening torque 678 Nm, weight only 1.3 kg one hand switch for speed and direction; suitable for left and right hand users (switch can be changed over) air consumption 127 l / min, working pressure 6.3 bar, noise Lp A 97 $ POWERFUL AND SMALL! 4 PIECE SET WITH 1/2 DR IMPACT WRENCH, MINI GREASE GUN, GREASE CARTRIDGE AND OILER HAZET 9012EL-SPC/4 twin hammer impact wrench massive 1700 Nm loosening and 1064 Nm tightening torque - the most powerful in its class unique one-hand (thumb) reversing switch and speed knob at the back of the housing weight only 2.3 kg, 94.8 db noise level working pressure 6.3 bar, air consumption 139 l / min supplied with -Hazet mini grease gun and cartridge with high performance lubricant - ideal for lubricating the impact wrench -mini oiler for automatic oiling of impact wrench (28 ml capacity, connects directly between air line and gun) QUALITY TOOLS FROM GERMANY size comparison to standard impact wrench 113mm $ ADDITIONAL BONUS ITEMS (VALUED OVER $ 100) 4 PIECE 1/2 DR IMPACT SOCKET SET - 24, 30, 32 AND 36 MM HAZET 900SZ/4 ideal set for drive, joint and axle shafts contains impact sockets 12 point in sizes 24 mm (VW Touran from 2006 and Passat C), 30 mm (VW Golf 4; Polo and New Beetle; Audi TT 1.8; Skoda Octavia, Superb, Fabia), 32 mm (VW Touareg from 2003), 36 mm (BMW 3, 5 and 7 series, Z3, M3; VW Polo since 01; Golf Plus 1.8 TDI from 05; Seat Ibiza from 02) BONUS HAZET PEN! PRESSURE SPRAYER - IMPROVED VERSION HAZET 199N-1 ideal for applying oil and separating agents, for disinfection and cleaning especially suitable for chemical products, including those that are highly corrosive, for the cleaning and degreasing of workpieces, workshops and vehicles, etc new capped pumping mechanism increases chemical resistance (regular rinsing required) net volume 1.0 litre flexible, break-proof pumping lever adjustable conical nozzle and also included flat spray nozzle integrated safety valve (2.5 bar) to ensure pressure is released before sprayer is opened, Viton gaskets permissible working pressure: max 2.5 bar flow rate: 0.5 l / min at 2.5 bar with white conical nozzle and 0.8 l / min at 2.5 bar with black flat spray nozzle $65.00 IMPROVED VERSION - NO METAL PARTS! MAGNETIC CUP HAZET holds small parts such as screws, nuts, etc. safely magnetic foot allows attachment to tool trolleys, workshop panels, bench, hoists, etc. 150 mm dia $29.00 $ MUST HAVE!

2 2 PIECE SET 3/8 DR IN-HEX SOCKET 7 AND 8 MM FOR BRAKE CALIPERS HAZET 2784/2584 SP SET 2 piece set with a 7 mm and a 8 mm short, 3/8 drive in-hex socket for rear brake calipers 7 mm socket (Hazet ) for Mercedes-Benz C-class (204) and 8 mm (Hazet ) for Audi TT (since 07), A4 (since 01), A6 (since 05) and A8 (since 03) blade length 7 mm, overall length 24 mm for controlled tightening, a torque wrench (e.g. Hazet CT) should be used with these sockets NEW SET! $ PIECE ADAPTER SET FOR 1/4, 3/8, 1/2 AND 3/4 DRIVE, IN PLASTIC TRAY HAZET 958/6 handy set covering the standard adapters from 1/4 to 3/4 drive includes 6 adapters for non-impact use as listed below the product picture $ BONUS BENT BOX WRENCH 12 MM FOR TURBOCHARGE FILTERS HAZET particularly suitable for lower connection of particulate filter on turbocharger that can t be accessed with normal wrench suitable for Audi A4 (B5-B6-B7) model years 97-08, A6 (C5-C6) years 97-11, VW Passat (3B/3BG) years with 1.9 and 2.0 l pump injector engine and particulate filter also suitable for holding the screw connection at the Y-pipe on VW/AUDI $ PIECE COMBINATION WRENCH SET 7-24 MM HAZET 600SPC/16 standard length wrenches, box end 15 º offset and with Traction profile slim, polished heads, shank with light-weight and stable double-t profile sizes 7-19, 21, 22 and 24 mm individual wrenches available for replacements and additional sizes as well $ PIECE OIL FILTER WRENCH SET HAZET 2169/6 for the oil filters and plastic oil filter housings of the most common vehicles fast application, safe and clean working (observe torque values specified by vehicle manufacturers) set includes -Hazet point, 74.4 mm - Mercedes, BMW, Audi, VW, Porsche, Nissan, Toyota, etc. -Hazet point, 94 mm - VW, Audi, Chrysler, Ford, Porsche, Mitsubishi, Nissan, Alfa-Romeo, MAN, etc. -Hazet point, 36 mm - Mercedes, BMW, GM, VW, Audi, MAN -Hazet point, 86.7 mm - for plastic oil filter housings on BMW and Volvo -Hazet grooves, 76 mm - Audi, Citroen, Fiat, Ford, Mercedes, Renault, Honda, GM, Suzuki, Seat, VW, Skoda, Renault (fuel filter), Volvo (fuel filter) -Hazet grooves, 86 mm - Alfa, VW, Audi, Fiat, Renault, Seat, Suzuki, Mercedes (fuel filter) (check with vehicle s specs to determine required filter wrench) MUST HAVE! BONUS 1/2 DR FEMALE MULTI-SPLINE (XZN) SOCKET M16 FOR OIL DRAIN PLUG AND REAR BRAKE CALIPER HAZET for multi-spline (XZN) screws with pin for oil drain plug on gearbox on e.g. Audi (A2, A3, A4, A6, TT), VW (Passat B5, Golf IV, LT, T4, T5), Porsche (Boxster with shift gear), Skoda (Fabia, Octavia, Superb), Ford (Galaxy 1.9 Tdi with 6-speed gear box) also problem solver for rear brake caliper bolts VW T5 and Porsche Cayenne, Mercedes Vito and Sprinter where standard M16 is too big $69.50 $ PIECE TORX KEY SET WITH BALL END, T9 TO T40 VIGOR V1181 nickel-plated contains sizes T9, T10, T15, T20, T25, T27, T30 and T40 - in practical plastic clip $49.00 AUTO-IMPACT CENTER PUNCH VIGOR V1783 progressively adjustable by turning cap $23.50

3 2 PIECE TOOL SET FOR V-RIBBED BELTS VIGOR V3571 suitable for all kind of flexible belts on a/c systems, alternators as well as single and double groove belt pulleys most easy-to-use tool on the market - no adjustment necessary set contains 2 tools: one for installation and one for removal (detailed instructions on packaging) made of glass-reinforced nylon $68.00 installation removal 360 º CHAIN BRUSH FOR MOTOR BIKES, PUSH BIKES AND DRIVE CHAINS VIGOR V1915 for 360 degree cleaning of 400, 500 and 600 series drive chains on ATV (quads), motorcycles and industrial applications gentle cleaning of chains with O, X and Z rings approx 1000 bristles detailed usage instructions on packaging LONG BLOW GUN, EXTENDABLE MM VIGOR V2666 bent tip can be turned upwards or downwards $ /2 DR STEERING TIE ROD JOINT TOOL, MM VIGOR V2684 for fast and professional replacement of axial joints on steering tie rods on passenger cars for tie rod ends mm easy installation of longer steering tie rods due to open construction with metal balls inside tool bigger version for tie rod ends on SUVs and vans (35-45 mm) also available (Vigor V2683) GREAT IDEA! $38.00 $ PROBLEM SOLVER! COMPETENCE IN PRECISION & QUALITY 19 PIECE TWIST DRILL SET, HSS COBALT 8 AND TIAIN COATING, 1-10 MM, IN POLYSTYRENE CASE RUKO EFRO top of the range set when additional strength and heat-resistance is required exceptionally high-performing ground twist drills with 8 % Cobalt and 10 % Molybdenum with extremely distinctive heat resistance titanium-aluminium-nitride coating which offers additional heat and oxidation resistance point angle 118 º, helix angle º, split point suitable for drilling high-strength alloys and stainless, acid-resitant and heat-resistant steel also suitable for drilling aluminium, brass, bronze, plastics, cast iron and titanium alloys no cooling required sizes 1-10 mm in 0.5 mm increments supplied in light-weight polystyrene box replacement drills and individual sizes available in packs of 10 per size THE BEST! $ PIECE TWIST DRILL SET, HSS COBALT 5, 1-13 MM, IN POLYSTYRENE CASE RUKO RO 5 % Cobalt alloyed and ground HSS drills, with increased heat resistance compared to normal HSS drills point angle 130 º, from Ø 3 mm upwards with split point ideal drill for drilling high-strength stainless, acid- and heat-resistant steel (less than 1100 N/mm2) sizes 1-13 mm in 0.5 mm increments, supplied in light-weight polystyrene box replacement drills available individually $188.50

4 THREAD RESTORER KIT, FOR INTERNAL AND EXTERNAL THREADS - AVAILABLE IN 3 DIFFERENT SIZED KITS TIME / COST SAVER! allows the repair of a damaged inside or outside thread without the need to disassemble the work piece first and without having to buy different taps and dies the thread chasers adjust automatically to the thread diameter and pitch (coarse, medium and fine) suitable for left and right-hand threads in metric and imperial sizes and in any pitch - no measuring required the blades made of hardened steel reach into the grooves of the intact thread and trim the damaged area, also remove rust and burrs the internal thread chasers can also be applied below the damage and then used for recutting up to the threaded end which is an advantage over screw taps protective caps for internal thread chaser for repairing aluminium and other soft materials available separately internal thread chasers available from 5 to 88 mm and external thread chasers from 4 to 152 mm - in sets or loose for BS (British standard thread) blades with 55 º are available separately HAZET 842AIG-1/4 - $ piece small set for automotive and general repair contains 1 thread chaser for external threads 4-13 mm, 2 thread chasers for internal threads (5-8 mm and 8-12 mm) and protective caps supplied in practical box with foam RUKO $ piece medium set for automotive, workshops, yacht maintenance, agriculture contains 1 external thread chaser 4-19 mm, 2 internal thread chasers 8-11 mm and mm, all with 60 º, 3 spare blades RUKO $ piece large set for trucks, industrial maintenance, mining, shipyards, marine, etc. contains 2 external thread chasers (4-19 mm and mm), 4 internal thread chasers (8-11, 12-16, 16-20, mm), 6 spare blades 60 º Bigger sizes of internal and external thread chasers are available separately (up to 108 mm internal and 152 mm external) 7 PIECE LONG HEX KEY SET WITH BALL END, MM, COLOUR-CODED PB 212.LH-6 RB each hex key has a different colour, allowing easy identification of size perfect dimensional accuracy and hard and though special alloy generate the best hex keys on the market each key marked with serial number for total quality control sizes 1.5, 2, 2.5, 3, 4, 5 and 6 mm, supplied in practical clip all hex keys also available individually for replacements NEW SET! $ PIECE TWIST DRILL SET, HSS, 1-13 MM, IN EXTRA-FLAT STEEL CASE RUKO A made by Ruko under the Terrax brand standard drills, High Speed Steel (HSS) ground suitable for drilling into all standard steel (excl. hardened and stainless steel) and plastic point angle 118 º, helix angle º, split point good centering, little pressure required, improved chip removal sizes 1-13 mm in 0.5 mm increments supplied in flat steel case NEW BOX! 3 PIECE SET TUNGSTEN-CARBIDE ROTARY BURRS IN MINI-BOX RUKO for deburring, breaking of edges, trimming, processing welding seams, surface processing high-performance tungsten carbide rotary burrs with cross toothing - cross-toothing provides higher cutting capacity than simple toothing set contains 3 rotary burrs with 10 mm dia in shape cylinder with end toothing, shape tree and shape ball supplied in practical mini plastic box 3 PIECE STEP DRILL SET, HSS, 4-30 MM, IN POLYSTYRENE CASE RUKO RO made from High Speed Steel, bright finish suitable for all standard materials (excl. stainless and hardened steel) as well as sheet metal up to 4 mm thickness CBN grounding and spiral flute with split point result in very sharp and burr-free cutting edges and quiet running as well as high cutting performance optimized chip flow for easy removal of even long, non-breaking chips includes sizes 0/9 (4-12 mm, 9 steps, 6 mm shank), size 1 (4-20 mm, 9 steps, 8 mm shank) and size 2 (4-30 mm, 14 steps, 10 mm shank) supplied in light-weight polystyrene box WORK WITH THE BEST! $99.00 $98.50 $ /4 DRIVE SCREWDRIVER BIT HANDLE, 20 MM BLADE, WITH 8 BITS STORED IN HANDLE PB 6460.RED bits stored in handle, cap is screwed on/off strong magnet in front to hold bits securely in blade each tool with serial number to allow total quality control for every production step 20 mm blade, 120 mm overall length - GREAT XMAS perfect to keep in glove box or pocket PRESENT! contains bits: 3 flat (0.6x4, 0.8x5.5, 1x6.25); 3 Torx (T10, T15, T20) and 2 Phillips (#1 and 2) $49.00

5 STUBBY 1/4 DRIVE BIT HOLDER, SWISSGRIP SOFT GRIP HANDLE AND MAGNET PB M stubby handle for 1/4 drive bits, strong magnet in front to hold bits securely soft grip two-component handle SwissGrip 15 mm blade, 70 mm overall length each tool with serial number for total quality control 4 PIECE COLOUR-CODED SCREWDRIVER SET FOR POZIDRIV SCREWS PLUS WALL BRACKET PB 8243.RB for PoziDriv screws sizes Pozi # 0, 1, 2 and 3 each handle has different colour to easily identify correct size soft grip two-component handle SwissGrip tip size indicated at back of handle made in Switzerland supplied with practical wall rack all tools also available individually BONUS T-HANDLE RATCHETING BIT HOLDER FOR 1/4 DRIVE BITS PB 255.MR-80 ratchet can be easily reversed or put into locking (middle) position with one hand 80 mm blade with strong magnet in front to hold bits securely in place 2 component softrip handle SwissGrip $22.00 $ PIECE SHORT HEX KEY SET, STRAIGHT-END, IMPERIAL, 1/20 TO 5/16 PB 213Z.H-12 short hex keys, straight end (no ball) perfect dimensional accuracy and hard and though special alloy generate the best hex keys on the market each key marked with serial number for total quality control sizes 1/20, 1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16, supplied in practical clip all hex keys also available individually for replacements $ PIECE IMPERIAL PARALLEL PIN PUNCH SET, 3/32 TO 5/16 PB 755.A BL blade length mm, overall length 150 mm special chrome-vanadium steel and exact heat treatment for pronounced elasticity with a high level of hardness sizes included 3/32, 1/8, 5/32 3/16 1/4, 5/16 - size 3/8 also available separately (not included in price) $ $ PIECE MECATORQUE TORQUE-LIMITING 1/4 DRIVE BIT DRIVER SET - AVAILABLE IN 2 VERSIONS BONUS newly developed unit with analogue scale - works without batteries user can set required torque level on scale without any tools required can be recalibrated by user with included recalibration tool (access to torque meter required) 20 mm blade with strong magnet to hold bits, softgrip two-component handle SwissGrip suitable for all 1/4 hex bits accuracy +/- 6 % - supplied with certificate life time (of tool) warranty - excl wear and tear and improper usage PB 8321.SET B2 - $ contains torque handle 0.4 to 2.0 Nm, 16 precision bits 25 mm long in small sizes (3 slotted, 3 Phillips, 2 Pozi, 5 Torx, 3 Hex), recalibration tool supplied in high-quality plastic box with foam bits colour-coded through Nano technology for extra corrosion protection and easy identification of tip type PB 8321.SET B3 - $ contains torque handle Nm, 16 precision bits 25 mm long in medium sizes (4 slotted, 2 Phillips, 2 Pozi, 5 Torx, 3 Hex), recalibration tool supplied in high-quality plastic box with foam bits colour-coded through Nano technology for extra corrosion protection and easy identification of tip type 6 PIECE METRIC PARALLEL PIN PUNCH SET, 2-8 MM, COLOUR-CODED PB 755.BL RB high quality parallel pin punches, each 150 mm overall length and 40 mm blade length special chrome-vanadium steel and exact heat treatment for pronounced elasticity with a high level of hardness each size got its own distinctive colour for easy identification colours applied through powder-coating each punch with serial number for total quality control sizes included 2, 3, 4, 5, 6 and 8 mm - in practical plastic clip all sizes also available individually for replacements $ PIECE INSULATED SCREWDRIVER SET WITH SOFT-GRIP HANDLE, FOR SLOTTED AND PHILLIPS SCREWS PB 5542.CN VDE approved for up to 1000 volts slim, compact style two-component soft grip handle set contains 4 slotted (0.5 x 3 x 100; 0.6 x 3.5 x 100, 0.8 x 4 x 100; 1 x 5.5 x 125 mm) and 2 Phillips (PH # 1 x 80, PH # 2 x 100 mm) screwdrivers 100 % made in Switzerland all sizes and further sizes and types (Pozi, Hex Nut, Hex, etc.) also available individually $79.50

6 UNIVERSAL AXLE BAR MUELLER for demounting the lower suspension arm, ball joints, axle parts, etc. universal use, turnable, 6 different hook positions length-wise and 2 height-wise lower suspension arms under tension can be easily lowered and suspension components safely separated even very tight suspension arms can be lowered with reduced effort thanks to the unique design of the axle bar using leverage and the operator s own body weight anti-slip grip, drop-forged hook TIME SAVER! WATCH THE APPLICATION VIDEO ON 1/4 DRIVE TENSIONER FOR SELF-GRIPPING SPRING BAND HOSE CLAMPS - AVAILABLE IN 2 VERSIONS for hard to access hose clamps clamping range 8-70 mm can be operated with any 1/4 drive tool MUELLER $99.00 universal model MUELLER $ new model specifically for the very flat clamps of the supercharge air-hose on VW / Audi NEW VERSION! UNIVERSAL WRENCH EXTENSION - AVAILABLE IN 2 SIZES suitable for all kind of wrenches (ring, open-end, combination) and hex keys provide extra leverage by extending the length of a wrench or hex key for loosening of tight connections and/or in hard to reach areas where no other tool is suitable to avoid excess force on wrenches, only apply continuous, equal force (no sharp blows) and secure wrench in extension (tape, cable tie, velcro) MUELLER $99.50 small version for wrenches up to size 26 mm 340 mm long, 0.8 kg MUELLER $ large version (580 mm long) for wrenches up to 46 mm 580 mm long, 2.1 kg GREAT IDEA! the tool innovator $ $69.50 WHEEL CAP REMOVAL AND STORAGE TOOL, WITH MAGNETIC HOLDER MUELLER /M for demounting / installing and storing the plastic protection caps on wheel nuts room for up to 20 wheel caps to be stored in handle suitable for most 17 mm wheel nut caps on e.g. GM, Audi, Skoda, VW, Seat, etc. slim construction allows use on deeply located wheel caps supplied with magnetic clip to attach tube to flat surface (bench, trolley, metal wall panel, etc.) WHEEL HUB PULLER WITH SLIDE HAMMER MUELLER suitable for most 4 and 5 hole hubs, on e.g. VW, Audi, Seat, Skoda, GM, Volvo, Fiat, Renault, Peugeot, Citroen, etc. supplied with wheel hub basic unit, slide hammer with 2 weights (6 and 3 kg) plus adapter UN 1.1/2 all items also available individually for e.g. use of basic unit with existing slide hammer TIME SAVER! $ PLASTIC PICK AND FINISHING HAMMERS - 3 TYPES AVAILABLE for precise and easy working in car body repairs and with sheet metal available in 3 different shapes - refer below MUELLER mm long head, 30 mm dia, 2 pointy ends $69.50 MUELLER mm long head, 40 mm dia, 2 pointy ends $76.00 MUELLER mm long head, 40 mm dia, 2 flat ends $ /2 DRIVE POWERFUL IMPACT WRENCH, 1600 NM MUELLER Nm loosening torque, 1084 Nm tightening torque - very powerful only 1.8 kg, 94.2 db noise level one hand switch for speed and direction suitable for left and right-hand user (switch can be changed over) 174 mm long, 1/4 inlet thread, 135 l / min air consumption 7800 rpm right turn, 8100 rpm left turn supplied with protection boot as a bonus LIMITED STOCK! $ * Please note: these tools should only be used as a last resort where no other tool is suitable as they can leave marks on wrenches, or in extreme cases damage them. No implied or explicit warranty accepted for damage to tools or equipment or personal injury - any use entirely at user s own risk. Safety gear (gloves, goggles, etc.) must be worn when tool is used. BONUS

7 German Specialist Puller Manufacturer UNIVERSAL WIPER ARM PULLER KUKKO 128-F-SW suitable for windscreen wiper arms of most passenger cars the puller arms can be moved and rotated which allows use on cars with restricted access due to highly arched bonnets cross-beam with scale to ensure arms are positioned centrically and thus balanced pulling for wiper arms with integrated washer nozzles, the supplied brass cap is placed over the nozzle max spread 60 mm, max reach 50 mm 2 ARM PULLER FOR 5TH GEAR KUKKO V speciale profile thin legs with tensioner to keep the arms from spreading apart specifically designed puller for gears on VW / Audi 2007 models (eg. 5th gear pinions in transmission 02A) max spread 120 mm, max reach 100 mm replacements legs available separately COMBINATION WRENCH SET - AVAILABLE IN METRIC AND IMPERIAL open jaw and ring set at 15 º chrome-plated, jaw polished ELO 205S 12M-1 - $ includes 12 metric sizes (10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30 and 32 mm) ELO 205S 8AF-1 - $ includes 8 imperial sizes (3/8, 7/16, 1/2, 9/16, 5/8, 3/4, 7/8 and 1 AF) further sizes also available to complement either set 8 PIECE DOUBLE-BOX WRENCH SET, FLAT ELO 120S 8M double box wrench, flat, straight (DIN 837/ISO 3318), chrome-plated set includes sizes 6x7, 8x9, 10x11, 12x13, 14x15, 16x17, 18x19, 20x22 mm $ $ PROBLEM SOLVER! $ LONG-NOSE GRIP PLIERS, EXTRA LONG 300 MM ELO long and slim jaws, for use in narrow and deep sections gripping capcity up to 130 mm $ ARM PULLER WITH EXTREMELY SMALL AND THIN FEET KUKKO 20-1-S-T extremely small pulling arms with very thin, trapeze shaped feet (refer table) suitable for very confined spaces the trapeze shaped feet allow them to be inserted at an angle between the part to be pulled and e.g. the wall of a casing or any other obstruction max force 4 to / 75 Nm max spread 90 mm, max reach 100 mm (can be increased to 200 mm with optional extensions below) OPTIONAL: 100 MM EXTENSION SET KUKKO 1-V-100/P pair of extensions 100 mm for puller above - allows an extra 100 mm in reach extensions are inserted between the foot and the leg of the puller extensions can also be used on other pullers, e.g. Kukko 20-1, Kukko (new series only) Tradition - Made in Germany 19 PIECE TERMINAL RELEASE TOOL KIT KL K universal set for release of plug and socket cable connections in automotive electronics without risk of damage or injury barbed hooks are pushed on the terminals by tool forks - cables and plugs can be extracted metal tool handle and chrome blade all tools also available individually $ $95.00 KL Audi BMW Ford Mercedes Holden Renault Seat Skoda VW x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x x $ x x x x x x x x x x x x x x x x x x x x x x

8 The Brush Company from Germany 3 PIECE UNIVERSAL HAND WIRE BRUSH SET - STEEL, STAINLESS STEEL AND BRASS LES 056 SP SET set with universal wire brushes in steel, stainless steel and brass bristle area 135 mm x 10 mm, overall length 260 mm $ PIECE HOLE CLEANING BRUSH SET, BRASS, WITH WOODEN HANDLE LES 560 SP SET for cleaning bore holes or slots, as well as cleaning threads or deburring cross holes comfortable working thanks to wooden handle sizes included: 10 mm, 20 and 30 mm diameter - bristle area 100 mm long, overall length 300 mm $ PIECE CIRCLIP PLIERS SET - INTERNAL/ EXTERNAL, STRAIGHT/BENT NWS 792 for circlips from mm anti-slip, turned precision tips plastic dipped handles includes 2 outside pliers for shafts and 2 inside pliers for bore holes, one straight and one 45 º bent each $ NEW SET! 10 PIECE 5-STAR TAMPERPROOF BIT SET WITH REVERSIBLE FINE TOOTH MICRO RATCHET KL K for 5 star tamper screws (not identical to Torx) on e.g. pumps in pump-line-injection systems on Mercedes commercial vehicles (e.g. Atego, Actros), Mercedes outside mirror, mass air-flow sensor VW and Audi, immobilizer control unit (ES3) on Rover 75 and other connections with 5 star tamper screws set includes: reversible 1/4 drive mini fine tooth ratchet, 9 five star tamper bits (sizes 10, 15, 20, 25, 27, 30, 40, 45 and 50), plastic case NEW SET! $67.00 SORTIMO L-BOXX - AVAILABLE IN 2 VERSIONS new product, designed for tradesmen and field technicians working out of their vehicles tool cases can be integrated into Sortimo system vehicle set-up robust, splash-proof, stackable handles in lid and on the side SORTIMO LS-BOXX 306 TOOL CASE B&W tool board over base attached with velcro, can be turned around 180 º and can be equipped on both sides, 22 tool pockets in total tool board in lid screwed in, total of 10 tool pockets/straps 2 drawers for additional tools and equipment outside dimensions 442 x 321 x 357 mm, approx. 6 kg tools for demonstration purposes only - not included SORTIMO L-BOXX 136 TOOL CASE B&W tool board over base attached with velcro, can be turned around 180 º and can be equipped on both sides, 22 tool pockets in total tool board in lid screwed in, total of 10 tool pockets/straps outside dimensions 442 x 151 x 357 mm, inside 378 x 107 x 311 mm, approx 3.2 kg tools for demonstration purposes only - not included This brochure is published by OzSwiss European Tools, ABN , Tel , Fax , Web com.au. All prices in this brochure are suggested promotional prices that include GST when sold in Australia and exclude GST when sold in NZ. Prices are valid till 30 April 15, after that only while stocks last and without any bonus item. There is no obligation for resellers to adhere to these prices. OzSwiss European Tools will do all things necessary to maintain stocks of products advertised but cannot be made responsible for the unavailability of such products as a consequence of the failure of suppliers to deliver at all or on time or through any other circumstances beyond the control of OzSwiss European Tools. E. & O.E., copyright with OzSwiss European Tools. Reproduction in whole or part is prohibited without written prior approval. AVAILABLE FROM: $ $296.50