General Tools. Ring Wrench FT-536. Nut Wrench FT-677 FT-687 FT-707 CJ-770 CJ-800 CY-030 CJ-123 FT-258A

Transcription

1 Ring Wrench FT-536 Multi-Function Socket Set For use with hydraulic, A/C and plumbing fittings, tie-rod ends, O2 sensors and diesel injectors. For hard to reach fasteners where an open end wrench will not work. * Sockets fit both Metric and SAE. * Great for damaged or worn nuts. * Closed ring socket for seized track rod locking nuts. * Square drive can be used with torque wrench or breaker bar for precise tightening. * Closed socket ensures a tight grip, it will not spread open to release nut. FT-677 The Special Wrench For Turbo Special wrench for screwing on the turbo-charger in diesel engines of VW / AUDI; new model, short type, from now on very convenient assembling and disassembling for screw underneath the turbo-charger For:VW / AUDI 3/8" Dr. Size 12 mm x 12PT FT-687 Double-key Open end Ring Wrench SW 17 x 17 ring open, unilaterally bent. For the injection line of diesel engines. Type: Universal FT-707 Hex Axle Tool 3/8"Dr. Size 17 & 19 & 22 & 24mm 6PT Length 63 mm CJ-770 Gland Nut Wrench Fully adjustable to fit hydraulic cylinders on vehicles having gland nuts from 1 to 3-3/4" in diameter. It also reverses to work on either 1/4" or 7/32" pin holes. Use it with a 1/2" square drive to loosen the toughest gland nuts. CJ-800 Adjustable Gland Nut Wrench The 1266 is specially designed to fit hydraulic cylinders on most farm and construction equipment. It adjusts to fit gland nuts from 2" to 6" dia. Pin to pin. And it's reversible to fit 1/4" and 5/16" dia. Pin holes. This heavy-duty wrench features a 3/4" sq. dr. to tackle even the most stubbom gland nuts. CY pcs Indexable pry bar 10"-12"-15" 10" Adj. Pry bar, 12" Adj. Pry bar, 15" Adj. Pry bar, CRV Max Torque:45 kgs-m CJ-123 Wheel Weight Pliers Easily removes and replaces wheel weights, as well as cutting and crimping. Made of heat strenthened steel. Included comfortable vinyl handle grips. FT-258A Angled Socket 22mm hex Application: VW-Audi, BMW, Mercedes, Ford, Opel/Vauxhall, Peugeot, Citroë n, Renault, Seat, Skoda, Japanese cars, etc. Hex: 22mm; Length: 250mm; Weight: 450g FT-258B Angled Socket 22mm hex Application: VW-Audi, BMW, Mercedes, Ford, Opel/Vauxhall, Peugeot, Citroë n, Renault, Seat, Skoda, Japanese cars, etc. o; Angle bent at 30 Hex: 22mm; FT-905 Length: 250mm; Weight: 450g Jimmy Bars Bar diameter : 18mm x 8 PT * Length available : 500mm, 600mm, 800mm, 1000mm. Nut Wrench

2 Nut Wrench Ring Pliers FT-258C Angled Socket 22mm hex For easy removal and replacement of hard to reach lambdaprobes e.g. when the lambda sensor is located directly in front of the splash wall. Hex: 22 mm' Length: 220 mm FT-476 Driveshaft Tie Pliers Applicable on Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes, Nissan, Opel/Vauxhall, VW, etc. * For crimping driveshaft bellows ties. * Suitable for Oetiker fittings. FT-486 Wrenches For Nuts With Top Holes * Interchangeable pins. * Set of 2 spare pins. * Forged in chrome vanadium steel, with divider-type adjustment controlled from central knurl. Each wrench supplied with a set of 8 pins. Chrome finish. * Double-ended round pins for nuts with top holes. FT-486FC Wrench For Nuts With Top Slots * Interchangeable pins.; * Capacity 20 to 100 mm. * Forged in chrome-vanadium steel, with divider-type adjustment and centre knurl.; * Supplied with a set of 8 pins. * Pins size: 4, 5, 6, 8 mm. * Length 245 mm. CY-210 Open Single Ended Ratchet Wrench Can be used on pneumatic & hydraulic connections such as brake pipes. Size : 10, 11, 13, 17, 19, 22mm Also available : 10, 11, 12, 13, 14, 17, 19, 22, 24, 27, 30, 32mm. FT-077 Hose Stripping Pliers length 200 mm pcs Mini Snap Ring Pliers Set Small-size pliers for work in tight areas. Service S-ring and R-ring lips. Internal or external, straight or angled. Ruggedly built of heat-treated chrome molybdenum steel. Set includes two internal snap ring pliers (one straight, one 45 ) and two external snap right pliers (one straight, one 45 ). HL-0016 Retaining Ring Pliers Removes external retaining rings used to locate bearings on shafts of transmissions, differentials, etc. Maximum spread: 17/16" FT-335 Retaining Ring Plier * For use on automobile transmission rings. * 9-1/2" long with vinyl grips. CJ-390B Angle Tip Lock Ring Pliers Used to spread snap rings found on brakes, pedal shafts, transmissions, clutch shafts, machine tools, and some piston ring Jaws are scored on outside for secure gripping. Tip: Flat, angled, serrated.; Spread: 1-1/2" (38mm); Length: 9" (230mm) CJ-390C Straight Tip Lock Ring Pliers Used to spread snap rings found on brakes, pedal shafts, transmissions, clutch shafts, machine tools, and some piston ring Jaws are scored on outside for secure gripping. Tip: Flat, straight, serrated; Spread: 1-1/2" (38mm); Length: 9" (230mm)

3 Ring Pliers Hose Clamp YF-6339 Parallel Jaw Lock Ring Pliers Compound leverage simplifies removal, Indented jaw tips hold ring ends and prevent breakage, Plastisol grips for added comfort, For the removal of lock snap rings used on bearing shafts. Overall Length : 10" (250mm) Jaw Opening : 1-1/8" (28.5mm) Material : Alloy Steel. CJ-390D Flat Nose Retaining Ring Pliers * Works on GM output shaft and 425 chain sprocket. * Has additional ring applications. * Maximum spread: 1-1/2" (38.1mm); * Length: 9-1/4" (235.0mm) FT-436 Clip Removal Pliers Tapered forks slide under most types of auto body clips, then a squeeze of the handles pops the clips out. Has red, vinyl-covered handles. OT-923 Combination Internal & External Snap Ring Pliers A handy combination tool for internal and external snap rings. Compresses internal rings in one position. Move the quick-change reversing lever to expand external rings. Come with four sets of tips in a plastic box. Tips included : Straight tips: 0.045", 0.060"; 45 tips : 0.045"; 90 tips : 0.035" OT-930 Circlip Tools * Internal / External. * Supplied with 4 pairs of tips. * "T" Bar and screw action gives precise control. * Applications : mm, (diameter) 1-3/4" - 7". FT-956A Tube Blocking Pliers For releasing and re-fitting the re-usable hose clips types CLIC and CLIC-R. Suitable for VW-Audi, Citroën, Mercedes, Opel/Vauxhall, Peugeot, etc. FT-956B Tube Blocking Pliers For releasing and re-fitting the re-usable hose clips types CLIC and CLIC-L. Suitable for VW-Audi, Citroën, Mercedes, Opel/Vauxhall, Peugeot, etc. FT-956C Hose Clamp Pliers For the operation of spring band hose clamps whose three ends are located on tubes, e.g. on fuel lines and tank ventilation lines on VW, AUDI, SEAT, SKODA. Chrome-Vanadium.Surface nickel-plated. FT-956D Hose Clip Pliers (German Utility Model) Version with vertically mounted drive slots, without locking lever. FT-459 Hose Clip Pliers For opening and closing hose clips with a lock in the open position. 1. To open the hose clip, place it in the locating groove so that it is fully in contact with the surface marked ON. Operate the pliers. The hose clip will be held in the open position. 2. To close the hose clip, place it in the locating groove so that it is fully in contact with the surface marked OFF. Operate the pliers. The hose clip will be unlocked and can be positioned as required on the hose clip. Suitable for on hose clips with a built-in lock in the open position e.g. Chrysler etc.

4 Clip Pliers Hose Clamp Pliers HL pcs Hose Clamp Plier kit Three Pliers service all ring type or flat type hose clamp. * One Cross slotted jaws plier & one wide flat band hose clamp jaws plier, both plers feature ratcheting lock mechanism holding the clamp in an open position for easy removal and installation. HL in 1 Changable Hose Clamp Plier kit Three Pliers service all ring type or flat type hose clamp with changeable tips of 10. FT-788 Hose Clip Pliers With Locking Ratchet For replacement of hose-clips on Fuel-lines, Oil-pipes and water-hoses, which are not retained by "Jubilee" type clips, but re-usable, self-tensioning springclips. Special design allows the spring hose clips to be securely gripped and safely expanded. Suitable for Alfa Romeo, Audi, Citroën, Fiat, Ford, Hyundai, Lancia, MAN, Mercedes, Opel/Vauxhall, Peugeot, Porsche, Renault, Seat, Toyota, VW, Volvo, etc. BT-080 Hose Clamp Pliers For spring band hose clamps FT-607A Hose Clip Pliers With locking ratchet, For removal and replacement of Fuel-lines, Oil-lines, Radiators Hoses and Heater Hoses fitted with space-saving, re-usable, selfclamping spring hose clips. Special design ensures that the compressed clips are safely and securely retained. For Alfa Romeo, Citroën, Fiat, Ford, Hyundai, Lancia, Mercedes, Opel/Vauxhall, Peugeot, Porsche, Renault, Seat, Skoda, Toyota, Volvo, etc. especially for the new Clips on fuel-lines on VW- Audi. Following makes of Hose Clips require these Pliers: Norma, ABA (AWAB), MIKALOR and MUBEA etc. FT-607B Hose Clip Pliers with locking ratchet (German Utility Model) but with pivoting tips. Due to the pivoting tips, the compression forces are always parallel to the ears of the hose-clips offering increased security. FT-607C Hose Clip Pliers with locking ratchet angled (German Utility Model) Version angled at 90 and has offset drive slots at the sides. FT-199A Relay Pliers For safe installing and removing of relays, even small ones, e.g. on OPEL, FORD, MAZDA, CHRYSLER, NISSAN, VW passenger cars, MERCEDES- BENZ, MAN, IVECO commercial vehicles Pliers with solid plastic body DBGM - German registered utility model; Material: Steel. FT-199B Relay Bent Pliers For installing and removing staggered relays e.g. on OPEL, RENAULT and NISSAN; Jaws 60 bent, Pliers with solid plastic body; Material: Steel

5 Clip pliers Hose clamp FT-778 Hose Clips Pliers For releasing and re-fitting reusable hose clips, types CLIC and CLIC-R (Caillau/Serflex). Application: Audi, Citroën, Fiat, Mercedes, Opel/Vauxhall, Peugeot, Renault, VW etc. FT pcs Spring-Clip Pliers Set For hose clips on cooling, heating, fuel or screen-washer systems. * FT-496A Standard-reach model with lock and pivoting jaws. Length: 220 mm * FT-496B Long-reach model with lock and pivoting jaws. Length: 282 mm * FT-496C Slip-joint model. Length: 280 mm. FT-460B Positive Lift Action Clip Remover Pliers Allows easy access and removal of those hard to reach clips on bumper covers, fender liners etc. Features positive lift action without damage to the clip or the surrounding area. Simply insert the jaws under the clip and squeeze the pliers to remove the clip. Length: 9-1/2"(240mm) FT-460D Diesel Connection Removing Pliers FT pcs Hog Ring Plier Set Used for upholstery work on most all Domestic and Foreign cars. For installation of "Hog Ring" fasteners. Specially made to grip and Hog Rings for closure. Spring loaded to hold hog ring in jaws during use. Cushion Grip Handle. * FT-945A 45 Degree Hog Ring Plier FT-945B Straight Hog Ring Plier CY-225 Flexible Hose Clamp For replacement of fuel, oil and water hose. Hose clamp with flexible 600mm wire. Convenient for working hidden areas and long distance. RD-7101 Flexible Cable Hose Clamp Removing Pliers Flexible clamp fastener. Flexible cable for hard to reach places. Pliers latch in position to securely hold hose clamp when expanded. Adjustable cable tension. AT-795 Clic - R Collar Pliers * For releasing and re-fitting reusable hose clips * For type clic and clic-r AT-795A Clic - R Collar Pliers * For releasing and re-fitting reuse able hose clips. It will quickly and easily to close and open the hose clips. * For type clic and clic-r FT-346 Hose Clamp Pliers FT-808 Earless Clamp Pliers - extra heavy duty For tightening of clamps (system OETIKER) on cv boots, water and fuel hoses. Suitable for Audi, BMW, Chrysler, Ford, GM, Honda, Mazda, Mercedes, Nissan, Opel/Vauxhall, VW etc. Advantages: * No damage to spring band clamps. * No damage to hoses. * Easy and quick replacement of hoses.

6 Feeler / Thickness Gauge blade non-magnetic Feeler Gauge 6-blade gauge measures clearance in electronic ignition systems where nonmagnetic blades are required. These hard brass blades will not magnetize. Blade Lengths : 3-5/16" long; 0.006"(0.152mm), 0.008" (0.203mm), 0.010"(0.254mm), 0.012"(0.305mm), 0.014"(0.356mm), 0.016"(0.406mm) blade Thickness Gauge Size:.002"(0.05mm),.003"(0.08mm),.004"(0.10mm),.006"(0.15mm),.008"(0.20mm),.012"(0.30mm),.013"(0.33mm),.020"(0.50mm),.025"(0.63mm) B 9-blade Thickness Gauge with ruler Size:.002"(0.05mm),.003"(0.08mm),.004"(0.10mm),.006"(0.15mm),.008"(0.20mm),.012"(0.30mm),.013"(0.33mm),.020"(0.50mm),.025"(0.63mm) blade Valve-Tappet Feeler Gauge 12-blade gauge measures valve tappet clearances from.008" to.026. Offset blades provide easy access. Size:.008"(0.20mm),.010"(0.25mm),.012"(0.30mm),.013"(0.33mm),.014"(0.35mm),.015"(0.38mm),.016"(0.40mm),.018"(0.45mm),.019"(0.48mm),.020"(0.50mm),.025"(0.63mm),.026"(0.65mm) blade Mini Feeler Guage Miniature 17-blade feeler gauges are only 1/4" wide and measure clearances from 0.010" to 0.035" (0.254 to mm). Blade Lengths: 1-3/4" long blade Master Go-no-Go Gauge Blade size: 3" x 1/2" (76.2mm x 12.7mm). Blade thicknesses: , , , , , , , , , , , , , , , , , , , , , blade Feeler Gauge Designed for use in or near saltwater and other highly corrosive surroundings. (25)-3" x 1/2" blades of the following thicknesses:.0015,.006,.001,.016,.021,.002,.007,.012,.017,.002,.003,.008,.013,.018,.023,.004,.009,.014,.019,.024,.005,.010,.015,.020, blade Deluxe Feeler Gauge Gauge measures clearances from " to 0.035" (0.038 to 0.889mm). It also includes one 0.010" brass blade to use with electronic ignitions. Blade Lengths: 3-5/16" long, blade Width: 1/2" blade Deluxe Feeler Gauge Gauge measures clearances from " to 0.035" (0.038 to 0.889mm). It also includes 7 brass blade to use with electronic ignition systems where nonmagnetic blades are required. These hard brass blades will not magnetize. Blade Lengths: 3-5/16" long, blade Width: 1/2".

7 Screw Extractor Nut Splitter CY pcs Screw Extractor Set CR-MO No.1 1/8"-1/4" ( M 3-6 ); No.2 1/4"- 5/16" ( M 6-8 ) No.3 5/16"-7/16" ( M 8-11 ); No.4 7/16"-9/16" ( M ) No.5 9/16"-3/4" ( M ) CY-148A 6 pcs Screw Extractor Set CR-MO No.1 1/8"-1/4" ( M 3-6 ); No.2 1/4"- 5/16" ( M 6-8 ) No.3 5/16"-7/16" ( M 8-11 ); No.4 7/16"-9/16" ( M ) No.5 9/16"-3/4" ( M ); No.6 3/4"-1" ( M ) CY-148B 5 pcs Screw Extractor Set CR-MO No.1 1/8"-1/4" ( M 3-6 ); No.2 1/4"- 5/16" ( M 6-8 ) No.3 5/16"-7/16" ( M 8-11 ); No.4 7/16"-9/16" ( M ) No.5 9/16"-3/4" ( M ) Material: CR-MO Steel. CY-148B 10 pcs Combination Extractor & Drill Set.Contains five spiral extractors #1 through #5 and five mechanic's length HSS drill. Removes bolts and screws up to 5/8". Left handl extractors with right hand drills. Contain: HSS drill size, 5/64",7/64",5/32",1/4",19/64", Screw extractor size: 5/64",7/64",5/32",1/4",19/64", CY-284 Stud Remover Powerhouse offers this tool designed to remove threaded studs or install the same from 1/4"-3/4". All that's required is a 1/2-inch drive ratchet. To 3/4" Carbon Body with H.T. Chrome Plated. Gear is Carbon steel with Black oxided 1/2"Dr. CY-208A 4 pcs Stud Puller Wrench Set CR-V; Special designed for using on screw damaged or without head to screw up and pull up. Size: 1/2"Dr. : 6, 8, 10 & 12mm CY-208 MM Size: (3/8"Dr.) x 6, 8mm, (1/2"Dr.) x 10, 12mm CY-208C SAE Size: (3/8"Dr.) x 1/4", 5/16", (1/2"Dr.) x 3/8" & 7/16" CY-208D SAE Size: (1/2"Dr.) x 1/4", 5/16", 3/8" & 7/16" CY-208A7 7 pcs Stud Puller Wrench Set Function: Screw without head; screw up; pull up Advantage: 1. quick function 2. damage to stud. Ways in use: Put stud puller wrench on screw, then handle on it; Turn it up or down. Made of chrome vanadium Size: 1/2"Dr. 5mm, 6mm, 7mm, 8mm, 10mm, 12mm, 14mm CY-208F 19 pcs 3/8"&1/2"Dr. Twist Socket Set 10 pc- 3/8"DR. Anti-skid Socket : mm (CR-MO) 4 pc -1/2"DR. Stud Extraxtor / Installer Socket: mm (CR-V) 5 pc - Screw Extractor Set: (Plastic case) 1/8"-1/4", 1/4"-5/16", 5/16"-7/16", 7/16"-9/16", 9/16"-3/4". CY pcs Nut Splitter set Removes rusted and corroded nuts. CR-V, Applied size : sizes: 7/8" /16"(22-27mm); 5/8" -- 7/8" (16-22mm) 1/2" -- 5/8" (12-16mm); 5/16" -- 1/2" ( 9-12mm) HL-0005 Universal Outside Thread Chaser Eliminates the need or expensive thread-cutting equipment. Secure the tool slightly on the good threads, then back off over the damaged thread area to restore the threads. Working capacity : 1 1/4"~ 5" OD. Die cast alloy V-Pad will not damage the threads. And could be replaced while worn out. Die cast alloy V-pad includes 2 dimension with the thread chaser. Threads per inch : 4"~ 24" ; Metric Thread chaser : 1~ 3.5 mm

8 Fender Cover Nut Splitter FT-418 Magnetic Tool Holder (Panel Edge Protector) 450mm(L) long magnetic tool holder keeps small tools handy, visible and within easy reach. Mounts easily to wall or shelf edge with screws or even without screws. Great for holding kitchen knives as well. Has double row magnets for extra strength. also The quick and easy way to protect panel edges from sanding, grinding or painting. 13pcs.Magnetic for easy installation. BT-070 Mangenetic Fender Cover -4 Tool holding pocket * Front cover made with PVC Sponge Leather,backing is TR/BRUSH which does not damage or scratch any surface. * Top row includes STRONG magnets,which attract and stay on any metal surface easily. Easy to open and fold into compact size. * The magnets are removeable and replaceable before and after washing the fender cover. size : 1100 x 560mm (43-1/4" x 22"). BT-075 Magnetic Fender Cover * Front cover made with PVC Sponge Leather,backing is TR/BRUSH which does not damage or scratch any surface. * Top row includes STRONG magnets,which attract and stay on any metal surface easily. Easy to open and fold into compact size. Size available: 800x600mm (31-1/2" x 23-3/4").; 1080x390mm (42-1/2" x 15-3/8"). 1100x560mm (43-1/4" x 22"). HL-7004 Nut Cracker Offset, open-head designed nut cracker, allowing access to any spot from any angle. Applied sizes: 0~21mm (0"~ 3/4") HL pcs Nut Splitter kit to split nuts with hydraulic screw work in nut size nut sizes: 6mm~36mm (1/4 ~1-1/2 ) HL pcs Nut Splitter kit offset, open-head designed nut cracker, allowing access to any spot from any angle.to split nuts with hydraulic screw work in nut size nut sizes: 6mm~36mm (1/4 ~1-1/2 ) PF pcs Combination Flagdriver -- Star Key set 8 pcs Start key : T pcs Star key : T pcs Star key : T PF pcs Replaceable Flagdriver -Hex & Star Key set 17 pcs Hex key (Metric) : mm & Scrow bit : Θ- Star : T pcs Hex key (SAE) : 0.05"- 1/16"- 5/64"- 3/32"- 7/64"- 1/8"- 9/64"- 5/32" Star : T PF pcs Replaceable Flagdriver - Hex / Star key set 9 pcs Hex Key (Metric) : & screw bit : Θ-. 9 pcs Hex key (SAE) : /16"- 5/64"- 3/32"- 7/64"- 1/8"- 9/64"- 5/32"-. 9 pcs Star Key: T RD Pcs. Fold-Up Mini File Set Set provides 12 different file shapes. Includes round, half round, flat, knife, triangle, square, barrette, jointing, slitting, marking, equalizing and crossing.

9 Magnetic Tool Holder Pick Up Tools UG-B2115 Magnetic Pick-up Tools Telescopic bar, stainless steel, maintaining tools for metallic perts of mobile. non-magnetic cover to pick up small parts from deep Hole hard to work areas. PVC grip for a comfortable hold. (with pocket clip). Lifts capacity: 1.5 & 2.0 lbs; Length:165mm~880mm UG-B2135 Magnetic Pick-up Tools Lifts capacity:3.5 LBS; Length:170mm~880mm UG-B2155 Magnetic Pick-up Tools Lifts capacity:5.5 LBS; Length:170mm~762mm UG-B2180 Magnetic Pick-up Tools Lifts capacity:8.0 LBS; Length:170mm~762mm Flexible shaft magnetic Pick-up Tool UG-B168 Lifts capacity : 6.6 LB, Length:535mm UG-B169 Lifts capacity: 2.0 LB, Length:535mm Hinged Head Magnetic Pick-up tools UG-B162 Lifts capacity: 3.0 LB, Length:535mm UG-B164 Lifts capacity: 3.5 LB, Length:650mm UG-B165 Lifts capacity: 8.0 LB, Length:650mm Telescopic Magnetic Pick-up Tools UG-B16 Pickup capacity : 3.5 LB, L : 130 ~ 640mm UG-B18 Pickup capacity : 5.5 LB, L : 135 ~ 650mm UG-B18A Pickup capacity : 8.0 LB, L : 135 ~ 650mm UG-15 Magnetic Tray - Stainless steel * Save your time by having these small parts gathered on tray and you do not get frustrated when a bolt or nut rolls out of sight. UG-150 Round Tary Size: 150mm UG-151 Rectangular Tray Size: 240 x 140mm UG-156 Rectangular Tray Size: 365 x 165mm UG-158 Rectangular Tray Size: 330 x 250mm TR-360 Plastic Magnetic Tool tray * the Magnetic Tays prevent loss of small metal parts like sockets, bits, bolts & nuts etc. * Made from high quality plastic with strong magnetic, the soft foot prevents damage to painted surfaces. * magnetic round & rectangular tray keeps small parts hardwares & tools where you put it and can be used in any position or upside down. size Avaialble : Dia. 149x27mm deep. Size: 240 x 142 x 42.5mm deep. SA pc Flexible Pick-up Tool Set set included: Magnetic flexible bit holder 600mm(L), 2-in-1 flexible Pick up Tool 690mm(L), Flexible Socket adptor 1/4"Dr. x 600mm(L) SA-3101 Flexible Spring Claw Pick-Up Tool Length:600mm(L), SA-4101 Flexible Spring Magnetic Pick-Up Tool Length:600mm(L),

10 Inspecting Mirror UG-B455 3-in-1 Flex. Light+Magnets+Mirror Tools 17-1/2" inspection light, Positive action Push-button on/off switch, Replaceable bulb, Threaded tip accepts the following attachments, Magnetic retriever, 1-1/8" 2" swivel inspection mirror, operates on 2 AA batteries (Not included) UG-B426 5-in-1 Fle. Light+Magnets+Mirror Tool 620mm inspection lighted magnetic retrieuer flexible; operates on 3 AA batteries (Not included); Mirror 25 x 50mm ; magnet cap. 1.1 lb UG-B in 1 Telescopic Light & pickup tool UG-B in 1 Light & Mirror Tool UG-B in 1 Light & Pickup Tool UG-B425 2 in 1 Light & Pickup Tool UG-B171 3 in 1 Telescoping Mirror Magnets & pin Pickup capacity: 1.1 LB, Mirror size : dia. 40mm UG-B140 Inspection mirror tool Mirror size: dia. 40 mm (1-3/8 ), L:220mm UG-B145 Inspection mirror tool Mirror size : dia. 55mm (2-1/4 ), L:370mm UG-B148 Inspection mirror tool Mirror size : 50 x 90 mm, L:380mm UG-B151 Telescoping inspection mirror tool Mirror size:55 mm(2-1/4 ), L:250 ~ 720mm UG-B152 Telescoping inspection mirror tool Mirror size:50 x 90 mm, L:250 ~ 780mm DT Functions Tire Gauge * Plastic body, Air inlet: 1/4" Male; operation pressure: 90 PSI. ; Blow: 1.54 CFM. Large LCD display for easy reading Pressure unit selection for PSI or Bar or Kpa.; pressure increments : 0.5 PSI / 0.05 Bar / 5 Kpa; 3-function: 1. Fill Air (inflation) 2. Release air (deflation); 3. Gauge pressure(measuring)