Stainless Steel Tools

Transcription

1 HAZET Sockets and Socket Sets HINOX -Tools Stainless Steel Tools SAFETY HIGH-QUALITY ENVIRONMENTAL OMPATIILITY The static charge (peak load) of the tools is up to 30 % higher in comparison to competitive products The dynamic charge (permanent load) of the tools is up to 3 times higher longer service life All tools are without surface coating no allergic reactions due to chemical coatings 8 89 Safety-Insert- System a missing tool is noticed immediately Tools made of solid stainless material. All components, e.g. of the reversible ratchet are made of 100% stainless steel: ratchet housing, ratchet wheel, pawl, cover plates, screws, ball (just the shift lever and the handle are made of plastic). PERMANENT LOAD VALUES HAZET Screwdrivres Socket: onventional HAZET approx. 3 times higher STATI TORQUE HAZET Reversible Ratchet: 0% 50% 100% 130% onventional Reversible Ratchet HAZET Reversible Ratchet approx % Stainless steel prevents formation of rust! That means: Only the continuous application of tool, screw, washer, component and nut made of stainless steel ensures a safe rust-proof connection avoids additional costs or subsequent damage! What is rust from external sources and when does it occur? Rust from external sources results from use of tools made of standard steel with stainless steel screws or other stainless steel components. Frequent application leads to abrasion on steel tools. If these standard steel tools are used with stainless steel components, metal wear debris remain on the screwed connection. Wear debris and oxygen result in RUST! For high-end application in: Industry Aircraft sector Naval construction shipyards nautical sector Laboratories Automotive sector In segments of the food industry and medical engineering omponents and Spare Parts see pages 20 to 29 9

2 6-Point Socket HINOX $ Sockets and Socket Sets HINOX -Tools Reversible Ratchet HINOX Extension HINOX Safety: Up to 20% higher torque values (static charge) in the range of HINOX-tools Having the same hardness, high-grade stainless steel provides better mechanical strength properties than the standard material (31 rv 3) Safer application reduction of the risk of injury High quality: Service life up to three times higher as measured in a continuous load test Environmental friendliness: Environmentally friendly fabrication without surface coating No allergic reactions due to chemical coatings onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use 850 X- 25 6,8 11 3, X-,5 25 1, X , X- 5,5 25 8,5 1, X , X ,5 11,5 5, X ,5 12,5 6, X ,5, X ,5, X ,5 1 8, X , X , X , , HINOX i drive 6.3 = 1 Ratchet wheel 20 teeth High-grade stainless steel onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant - for outdoor use 2-component handle for more security 863 X Repair Set Ratchet Wheel HINOX 6.3 = 1 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 863 X 863 X Sliding T-Handle HINOX i drive 6.3 = 1 High-grade stainless steel onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use 865 X Spin Type Speeder HINOX i jdrive 6.3 = 1 High-grade stainless steel onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use 868 X Universal Joint HINOX i jdrive 6.3 = 1 Enables getting over obstacles and troublesome borders High-grade stainless steel onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use 869 X 36, HINOX 6 j drive 6.3 = 1 For inside hexagon screws High-grade stainless steel onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant - for outdoor use 1 F M N 8501 X , X- 12 6, X , X , X , i drive 6.3 = 1 TRInamicULTRA handle Haptic elements provide a better grip Anti-slipping even with oily hands High-grade stainless steel onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use 866 X Extension HINOX i jdrive 6.3 = 1 High-grade stainless steel onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant - for outdoor use 86 X x 125 x 39 mm j drive 6.3 = 1 Safety: Up to 20% higher torque values (static charge) in the range of HINOX -tools Having the same hardness, high-grade stainless steel provides better mechanical strength properties than the standard material (31 rv 3) Safer application reduction of the risk of injury High quality: Service life up to three times higher as measured in a continuous load test Environmental friendliness: Environmentally friendly fabrication without surface coating No allergic reactions due to chemical coatings onsiderably longer service life than competitive products (solid highgrade stainless steel instead of coating) Weathering resistant for outdoor use In plastic case PUR foam inserts 2 pieces 850 X-,5 5 5, X X 865 X 866 X 86 X X 869 X 85 X omponents and Spare Parts see pages 20 to 29

3 Sockets and Socket Sets 1 HAZET Range of 1 Sockets Fine Tooth Reversible Ratchets Reversible Ratchets with T-Handle Reversible Ratchets with Hinge Joint»Komposit«Reversible Ratchets Sockets s Extensions and many more. Reversible Ratchet with T-Handle Fine Tooth Reversible Ratchet Actuation angle 5, 2 teeth The lassic Reversible Ratchet 2-component handle providing a better grip Sockets 1 The advantages of a T-handle and a reversible ratchet combined in one tool Tools made of high-grade stainless steel Long style With universal joint : Tools made of solid stainless material. All components, e.g. of the reversible ratchet are made of 100% stainless steel: ratchet housing, ratchet wheel, pawl, cover plates, screws, ball (just the shift lever and the handle are made of plastic). omponents and Spare Parts see pages 20 to 29 81

4 Sockets and Socket Sets 1 6-Point Socket $ 6-Point Socket $ Universal Joint Socket (12-Point) 1 K G H f j drive 6.3 = 1 With Traction Profile DIN 312, ISO ,2 11,0 3, ,8 11,0 3, ,5 25, 11,0, ,1 11,0, ,5 25 8, 11,0, ,3 11,0 5, ,9 11,5 5, ,1 12,5 6, , 12,5, ,6 12,5, ,5 1,0 8, ,0 15,0 9, ,0 15,0 9, ,5 16,0 10, Lg- 50 6, 11,0, Lg- 5 50,9 11,0, Lg- 5,5 50 8,5 11, Lg ,2 11,0 5, Lg ,0 11, Lg ,0 12, Lg ,0 13, Lg ,5 1,5 9, Lg ,5 15,5 10, Lg ,0 1,0 12, Lg ,0 18,0 12, Point Socket j drive 6.3 = 1 With Traction profile Y% With universal joint For areas with restricted access j drive 6.3 = GZ , GZ , GZ , GZ ,5 13, GZ , GZ GZ ,6 13, GZ ,9 13, GZ ,9 13 9, Universal Joint Socket Set (12-Point) j drive 6.3 = 1 With Traction profile 850 A ,0 11,0, A ,5 11,0, A ,5 11,0 5, A ,5 11,5 5, A ,5 12,5 6, A ,0 11,5, A ,0 12,5, A ,5 1,0 8, A ,0 15,0 9, A ,5 16,0 10, AZ- 3 25, 1, AZ , 1, AZ ,3 11 5, AZ ,9 11,5 5, AZ ,0 12,5 6, AZ , 11,5, AZ ,5 12,5, AZ ,5 1 8, AZ ,6 15 9, AZ , , Y% 9 pieces In plastic drawer insert (212) 850 GZ GZ h Socket Long style j drive 6.3 = 1 With Traction profile $ Long style j drive 6.3 = 1 With Traction profile 850 TAZ- 3 50, 1, TAZ , 11 5, TAZ ,3 11 5, TAZ ,8 11 6, TAZ , 11, TAZ TAZ ,2 1,2 9, TAZ ,5 15,5 10, TAZ ,5 1,5 12, TAZ ,3 19,3 15, j drive 6.3 = 1 For outside TORX screws 1 r K G H 850-E 3, ,6 11, E 5,5 25 6, 11, E 6 5, 25 8,0 11, E 6, ,6 11, E 8, ,5 11, E 10 9, ,0 12, E 11 10, ,0 12, omponents and Spare Parts see pages 20 to 29

5 Sockets and Socket Sets h Universal Joint Socket h Adapter With universal joint For areas with restricted access j drive 6.3 = 1 For outside TORX screws Surface chrome plated, polished 1 r K G H 850 G-E 6 5, G-E 6, G-E 8, , G-E 10 9, h Universal Joint Socket Set pieces, cardboard packed Suitable for empty compartment of tool set 850 GZ9 850 G-E 6 E E 8 E G-E j drive 6.3 = 1 For inside TORX screws Surface VD Titanium Nitride (TIN) coated 1 r M N F 8502-T 8 2,31 3, T 9 2,50 3, T 10 2, 3, T 15 3,2, T 20 3,86, T 25,3, T 2,99, T 30 5,52 5, T 0 6,65 2, j drive 6.3 = 1 For slotted screws Surface VD Titanium Nitride (TIN) coated 1 M N F ,6 x 3, ,8 x x 5, ,2 x ,6 x j drive 6.3 = 1 i drive 10 = 3 DIN 3123, ISO , Impact Adapter i drive 6.3 = 1 (DIN 3121) g A 5.5 DIN 3126, form A For impact sockets with j drive 6.3 = 1 For power screwdrivers e.g. AEG, osch, Holz-Her, Metabo 8508 S i drive 6.3 = 1 (DIN 3121) g E 6.3 DIN 3126, form E ( 1 ) For power screwdrivers, e.g. AEG, Atlas-opco, lack & Decker, osch 8508 S S j drive 6.3 = 1 For inside hexagon screws Surface VD Titanium Nitride (TIN) coated for Improved endurance Higher torque values orrosion-resistant Minimization of cam-out effect (better screw grip) DIN 22 j drive 6.3 = 1 For Phillips-Recess screws PH Surface VD Titanium Nitride (TIN) coated 1 M N F 8506-PH PH PH PH Fine-Tooth Reversible Ratchet ,5 esp. for screwing the headliner and cape hood bracing wires, microswitches, soft top frames MW E 38 onvertible, 3-series onvertible 1 M N F ,5 6, , , , , , j drive 6.3 = 1 For Pozidriv screws PZ Surface VD Titanium Nitride (TIN) coated 1 M N F 850-PZ PZ PZ i drive 6.3 = 1 2 teeth, actuation angle 5, enable working in areas with restricted access One-hand operation 2-component handle for more security 863 F omponents and Spare Parts see pages 20 to 29 83

6 Sockets and Socket Sets 1 Reversible Ratchet i drive 6.3 = 1 Ratchet wheel 20 teeth 2-component handle for more security 863 P i drive 6.3 = 1 With locking device and quick-release press-button Ratchet wheel 20 teeth Safe locking of the sockets y pressing the button, attached tools are easily released with just one hand 2-component handle for more security, heads polished 863 S i drive 6.3 = 1 urved design for working in areas with restricted access Ratchet wheel 20 teeth 2-component handle for more security 863 P »Komposit«Reversible Ratchet i drive 6.3 = 1 With locking device and quick-release press-button hange-over switch on the handle enables onehand operation omponents are easily replaceable due to Komposit construction Shock resistant plastic body Ergonomic design Smooth-running ratchet wheel (20 teeth) Safe locking of the sockets y pressing the button, attached tools are easily released with just one hand over plates made of chrome-plated steel 863 N Reversible Ratchet with T-Handle i drive 6.3 = 1 Tool combines the advantages of a T-handle and a reversible ratchet Enables either powerful or sensitive working With quick-release press-button Optimal working with Extension HAZET Q Repair Set Repair Set Repair Set for ratchet wheel 6.3 = 1 i consisting of: ratchet wheel with quick-release press-button, pawl, cap screws, 1 holding down bolt each (small and large), for 863 N 863 N Repair Set for ratchet wheel 6.3 = 1 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 863 Q, 863 S 863 S 082 Flexible Handle i drive 6.3 = 1 Surface mat chrome-plated DIN 3122, ISO Sliding T-Handle i drive 6.3 = Spin Type Speeder i drive 6.3 = 1 TRInamicULTRA handle etter application of force due to haptic elements of the handle Non-slipping even with greasy hands Surface mat chrome-plated 866 U Extension i drive 6.3 = 1 With hinge joint for working in areas with restricted access Ratchet wheel 20 teeth 2-component handle for more safety 863 G Repair Set for shift lever consisting of: shift lever, pawl, screws, ball, compression spring for 863, 863 G, 863 P, 863 P, 863 Q, 863 S, 863 ST, P Repair Set for ratchet wheel 6.3 = 1 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 863 G, 863 P, 863 P, 863 ST 863 P N i jdrive 6.3 = 1 DIN 3123, ISO , omponents and Spare Parts see pages 20 to 29

7 Sockets and Socket Sets Extension Socket Rail 6 i jdrive 6.3 = 1 DIN 3123, ISO Universal Joint i jdrive 6.3 = 1 Enables getting over obstacles and troublesome borders DIN 3123, ISO , Flexible Extension i drive 6.3 = 1 Flexible shaft enables getting over obstacles and troublesome borders and fast working even in areas with restricted access With handle esp. for worm drive hose clips in fuel lines and coolant hoses, etc Wobble Extension i drive 6.3 = 1 Easy installation: 2 bore holes, e.g. for wall fixation Holding clamps adapted to the drive size lear arrangement on rail keeps sockets always ready to hand Made of metal 10 pcs. 6-point sockets H pcs. 6-point sockets, long style 850 Lg Lg10 H Empty, with 16 clips suitable for Sockets HL Magnetic Socket Rail, empty j drive 6.3 = 1 all tools are snugly embedded 1 pieces 850-,5 5 5, U j drive 6.3 = 1 all tools are snugly embedded 1 pieces 850-,5 5 5, P h Socket Set 6Ne i jdrive 6.3 = 1 With ball shaped, conical outside square, allows 8 angular movement to every side y attaching a socket until its limit stop is reached, the wobble extension may also be used as rigid extension Flexible shaft enables getting over obstacles and troublesome borders in areas with restricted access , exchangeable holding squares well-suited to the drive size (j 6.3 = 1 ) With magnetic back for fixation on e.g. tool trolley or in tool trolley s drawers (exactly fitting into drawers of HAZET tool trolley Assistent ) Safe fixation of the sockets due to special locking system (ball clamping) in the holding square. Locking release by turning the socket by 90. lear arrangement sockets are always ready to hand Rail made of metal, clips made of plastic 850 MH L j drive 6.3 = 1 With Reversible Ratchet with T-Handle all tools are snugly embedded 20 pieces 850-E E 5 E 6 E E 8 E 10 E T 8 T 9 T 10 T 15 T 20 T 25 T 2 T 30 T Q TQ omponents and Spare Parts see pages 20 to 29 85

8 Sockets and Socket Sets x 6 x 3 mm 18 x 126 x 39 mm 18 x 126 x 39 mm j drive 6.3 = 1 1 pieces , P j drive 6.3 = 1 20 pieces 850-,5 5 5, P U j drive 6.3 = 1 Screwdriver sockets VD-Titanium Nitride (TIN) coated 33 pieces ,6 x 3,5 0,8 x 1 x 5,5 1,2 x PH 1 PH 2 PH 3 PH 850-PZ 1 PZ 2 PZ P U x 125 x 39 mm 18 x 125 x 39 mm 18 x 125 x 39 mm j drive 6.3 = 1 16 pieces 850-,5 5 5, P U N j drive 6.3 = 1 Screwdriver sockets VD-Titanium Nitride (TIN) coated 30 pieces , ,6 x 3,5 1 x 5,5 1,2 x PH 1 PH PZ 1 PZ P U j drive 6.3 = 1 With fine-tooth reversible ratchet, 2 teeth Screwdriver sockets VD-Titanium Nitride (TIN) coated 30 pieces , ,6 x 3,5 1 x 5,5 1,2 x PH 1 PH PZ 1 PZ F U F omponents and Spare Parts see pages 20 to 29

9 Socket Set 6NeK Sockets and Socket Sets 1 Socket Set 6eNK x 188 x 56 mm 18 x 125 x 39 mm 18 x 125 x 39 mm j drive 6.3 = 1 Screwdriver sockets, VD-Titanium Nitride (TIN) coated 33 pieces , E 5 E 6 E E 8 E T 10 T 15 T 20 T 25 T x5, PH P U T j drive 6.3 = 1 Long and short style sockets In 2-coloured soft foam insert Safety-Insert-System a missing tool is noticed immediately 0 pieces 850-, Lg E T 10 T 15 T 20 T 25 T x 5, PH P 866 U j drive 6.3 = 1 1 pieces 850 A P U A N Socket Set (12-Point) x 121 x mm 16 x 9 x 3 mm 18 x 125 x 39 mm j drive 6.3 = 1 With long style sockets 13 pieces 850 Lg- 5 5, G j drive 6.3 = 1 1 pieces 850 AZ omponents and Spare Parts see pages 20 to S AZ j drive 6.3 = 1 1 pieces 850 A P U A

10 Sockets and Socket Sets 2 HAZET Range of 2 Sockets Fine-Tooth Reversible Ratchets Reversible Ratchets with Hinge Joint»Komposit«Reversible Ratchets Sockets s Extensions and many more. Reversible Ratchet Fine-Tooth Reversible Ratchet Actuation angle 5, 2 teeth»komposit«reversible Ratchet With one-hand change-over switch on the handle»komposit«-construction allows easy replacing of components With hinge joint Long pattern Screwdriver Sockets 2 Sockets 2 88 omponents and Spare Parts see pages 20 to 29

11 Sockets and Socket Sets Point Socket With Traction Profile DIN 312, ISO * = not according to DIN * 2,0 10,0 1,0 6, ,0 10,5 1,0 6, ,0 11,8 1,0 6, ,0 13,0 1,0 6, ,0 1, 1,0, ,0 15,8 1,5 8, ,0 1,0 18,5 9, ,5 18, 1,0 9, ,5 19,5 1,5 11, ,5 20,9 18,0 11, ,5 22,1 18,0 11, ,5 23,3 18,5 11, ,5 2,8 19,0 13, ,5 25,8 19,5 13, ,5 26,8 21,0 13, ,5 28,3 22,5 13, ,0 29,6 23,5 16, Impact Socket (6-Point) Suitable for all types of electric and pneumatic screwdrivers (rotary and impact wrenches) For excessive use special steel Surface phosphatized DIN 3129, ISO K G H f 880 S ,0 19 5, S ,5 19 6, S , 19, S ,0 19, S , 22 9, S , 22 9, S , , S , 22 11, S , , S ,3 22 1, S , 22 1, Point Socket $ $ $ 6-Point Socket Long style With Traction Profile DIN 312, ISO = with rubber ply for spark plugs 880 Lg- 5 10,9 1,0, Lg ,1 1,0, Lg ,0 1,0 10, Lg , 1,0 10, Lg ,8 1,2 11, Lg ,0 18,5 11, Lg , 18,5 12, Lg ,5 19,5 15, Lg ,8 19,5 15, Lg ,8 18,5 16, Lg ,0 18,5 16, Lg , 20,0 20, Lg ,5 20,0 20, Lg ,6 21,0 22, Lg , 21,0 16, Lg ,0 22,0 22, Lg ,6 21,0 22, Long style With Traction Profile + = with rubber ply for spark plugs 880 A Lg ,8 1,0 10, A Lg- 5 15,8 1,2 11, A Lg ,0 18,5 12, A Lg ,8 19,5 15, A Lg ,8 19,5 15, A Lg ,8 18,5 16, A Lg ,5 19,0 20, A Lg ,5 20,0 20, A Lg- 0 29,6 21,0 22, Point Socket With Traction Profile DIN 312, ISO Z- 9 2,0 13,0 1,0 6, Z-10 25,0 1, 1,0, Z-11 26,0 15,8 1,5 8, Z-12 2,0 1,0 18,5 9, Z-13 2,5 18, 1,0 9, Z-1 29,5 19,6 1,5 11, omponents and Spare Parts see pages 20 to $ $ % 12-Point Socket 880 Z-15 29,5 20,9 18,0 11, Z-16 29,5 22,1 18,0 11, Z-1 29,5 23,3 18,5 11, Z-18 31,5 2,6 19,0 13, Z-19 31,5 25,8 19,5 13, Z-20 31,5 26,8 20,0 13, Z-21 31,5 28,3 22,5 13, Z-22 3,0 29,6 23,5 15, With Traction Profile Sizes 1 and 516 with hexagon 880 A- 1 2,0 10,0 1,0 6, A- 5 2,0 11,8 1,0 6, AZ- 3 25,0 13,8 1,0, AZ- 26,0 15,8 1,5 8, AZ ,5 18, 1,0 9, AZ- 9 29,5 20,1 1,5 11, AZ ,5 21,1 18,0 11, AZ- 5 29,5 22,1 18,0 11, AZ ,5 23,8 18,5 11, AZ- 3 31,5 25,8 19,5 13, AZ ,5 26,8 21,0 13, AZ ,0 28,3 22,5 13, AZ- 3,0 30,3 23,5 15, AZ ,5 32,3 23,5 1, Long style With Traction Profile DIN 312, ISO * = not according to DIN + = with rubber ply for spark plugs 880 TZ- 9 * 5 13,0 1,0 10, TZ-10 * 5 1, 1,0 10, TZ-11 * 5 15,8 1,2 11, TZ-12 * 5 1,0 18,5 11, TZ-13 * 5 18, 18,5 12, TZ-1 * 5 19,5 19,5 15, TZ-15 * 60 20,8 19,5 15, TZ-16 * 60 21,8 18,5 16, TZ-1 * 60 23,0 18,5 16, TZ-18 * 66 2, 20,0 20, TZ-19 * 66 25,5 20,0 20, TZ ,6 21,0 22, TZ , 21,0 16, TZ ,0 22,0 22, TZ ,6 21,0 22, % % %

12 Sockets and Socket Sets 2 6-Point Socket With universal joint For working in areas with restricted access 880 G ,8 19 6, G-13 15,0 19 6, G-12 16,6 19, G-13 1,8 19, G ,0 19 9, G , 19 9, G ,0 19 9, G ,8 19 9, G-18 2, , G , , $ Universal Joint Socket Set (6-Point) h Socket For outside TORX screws 1 r K G H 880 Lg-E 8, , Lg-E 10 9, Lg-E 11 10, Lg-E 12 11,1 65 1, Lg-E 1 12, ,5 18, With universal joint For working in areas with restricted access For outside TORX screws 1 r K G H 880 G-E 8, G-E 10 9, G-E 12 11, G-E 1 12, h Impact Socket For outside TORX screws special steel Surface phosphatized 1 r K G H 880 S-E 6 5, 28 9, S-E 6, , S-E 8, , S-E 10 9,2 28 1, S-E 12 11, , S-E 1 12, , Spark Plug Socket I 8 parts 880 G G h Universal Joint Socket Set e h sockets with universal joint 880 G-E 8 E 10 E 12 E G-E For spark plug changing Long style With permanent magnet 880 A Mg T e.g. for MW 12-cyl. engines, M 0, 50i, 850i 1 S T K G 880 Mg T 20, , A Mg T 16, , 002 I 10 pieces In plastic drawer insert (312) 880 G G h Socket For outside TORX screws 1 r K G H 880-E 5,5 28,0 1, E 6 5, 28 8,0 1, E 6, ,0 1, E 8, ,5 1, E 10 9, ,0 1, E 11 10, ,0 1, E 12 11,1 28 1,9 1, E 1 12, ,5 18, For spark plug changing on motorcycles, e.g. HONDA, YAMAHA, SUZUKI, KAWASAKI, etc. With permanent magnet With outside hexagon 1 mm 1 S K G H 880 Mg T-18 18, ,5 22, omponents and Spare Parts see pages 20 to 29

13 Sockets and Socket Sets Spark Plug Socket I Spark Plug Socket For spark plug changing With permanent magnet With outside guide collar 23.6 mm for deeply located spark plugs hrome-vandium 1 S K G H 880 A Mg T-1 16, , I For spark plug changing, e.g. on MW motorcycles (K-models) and on MW passenger cars (motorsports M 3, M 5) With permanent magnet Without outside guide collar 1 S K G H 880 A Mg T-3 1, ,6 21, Spark Plug Socket Set I For spark plug changing With fixing clamp to hold the spark plug The fixing clamp reduces the risk of insulator damage 1 S T K G 880 KF 20, , A KF 16, , , , , Fixing clamp for 880 KF, 900 KF, 6 KF 880 KF Fixing clamp for 880 A KF, 900 A KF, 66, 66-1, 6 A KF 880 A KF INFORMATION Fixing lamp For inside hexagon screws lades made of special steel DIN 22 Ä : not according to DIN + = with offset blade 1 M N F S ,5 50 1, ,5 55 1, ,5 60 1, ,5 65 1, ,5 0 19, ,5 5 19, , , , , , , , , , , For inside hexagon screws lades made of special steel + = with offset blade 1 M N F 8801 A ,5 50 1, A ,5 55 1, A ,5 60 1, A ,5 65 1, A ,5 0 19, A- 5 8,5 5 19, A , , b With PUR foam insert pieces 16 x 9 x 3 mm 880 KF 880 A KF 880 Mg T A Mg T Mg T Stainless and insensitive to heat Largest possible clearance of insulator minimization of possible breaks 6 spring elements firm hold of the plugs Damping of transverse motion For inside hexagon screws Short style lades made of special steel 1 M N F S 8801 K , K- 1 3, K , K , K- 1 3, K , K , K , , , omponents and Spare Parts see pages 20 to 29 91

14 Sockets and Socket Sets 2 With ball hex For inside hexagon screws lades made of special steel 1 M N F S 8801 KK- 5 89, , KK- 6 89, , KK- 89, , KK- 8 89, , KK-10 88, , , h For inside TORX screws lades made of special steel 1 r M N F 8802-T 15 3,2 1 3, T 20 3,86 1 3, T 25,3 1 3, T 2,99 1 3, T 30 5,52 1 3, T 0 6,65 1 3, T 5,82 1 3, T 50 8,83 1, G-T 50 8, , For slotted screws lades made of special steel 1 M N F x 5,5 8,5 5 1, ,2 x 8 53, , ,6 x 10 62, , For Phillips-Recess screws PH lades made of special steel 1 M N F 8806-PH 1 23,5 50 1, PH 2 23,5 50 1, PH 3 28, , PH 32, , For inside screws with internal serration XZN lades made of special steel DIN & M N F , , , , For inside screws with internal serration XZN lades made of special steel DIN & M N F 8808 Lg , Lg , Speeder i drive 10 = Spin Type Speeder i drive 10 = 3 TRInamicULTRA handle etter application of force due to haptic elements of the handle Non-slipping even with greasy hands Surface mat chrome-plated Flexible Handle i drive 10 = Sliding T-Handle i drive 10 = Fine-Tooth Reversible Ratchet i drive 10 = 3 2 teeth, actuation angle 5, allow operation of screws in areas with restricted access 2-component handle for more safety 8816 F Reversible Ratchet i drive 10 = 3 Ratchet wheel 30 teeth 2-component handle for more safety 8816 P i drive 10 = 3 With locking device and quick-release press-button Ratchet wheel 30 teeth Tips DIN ISO U Safe locking of the sockets 92 omponents and Spare Parts see pages 20 to 29

15 Sockets and Socket Sets Reversible Ratchet y pressing the button, attached tools are easily released with just one hand With 2-component handle for more safety, heads polished 8816 S Long style With hinge joint for working in areas with restricted access 2-component handle for more safety i drive 10 = 3 Ratchet wheel 30 teeth 8816 G Short style With hinge joint i drive 10 = 3 Ratchet wheel 30 teeth 2-component handle for more safety 8816 GK Repair Set Please observe the following characteristics: 1. Shift lever burnished (black) 2. Replaceable head 3. since 1985 with ergonomic plastic handle Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring for 8816 G, 8816 GK, 8816 P, 8816 S, 8816 ST 226-1, 6110 T, T, T, T, T 602-1, S, P6 161 Repair Set for ratchet wheel 10 = 3 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 8816 G, 8816 GK, 8816 P, 8816 ST, 6110 T, T, T, T, T, P N 0223 Repair Set for ratchet wheel 10 = 3 i consisting of: ratchet wheel with quick-release press-button, pawl, cap screws, 1 holding down bolt each (small and large), for 8816 N 8816 N Repair Set for ratchet wheel 10 = 3 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 8816 S, S 8816 S 0865 Universal Joint Extension i jdrive 10 = 3, heads polished DIN 3123, ISO Wobble Extension i jdrive 10 = 3 With ball shaped, conical outside square, allows 8 angular movement to every side y attaching a socket until its limit stop is reached, the wobble extension may also be used as rigid extension Flexible shaft enables getting over obstacles and borders in areas with restricted access Impact Extension»Komposit«Reversible Ratchet i drive 10 = 3 With locking device and quick-release press-button hange-over switch on the handle enables one-hand operation omponents are easily replaceable due to Komposit construction Shock resistant plastic body Ergonomic design Smooth-running ratchet wheel (30 teeth) Safe locking of the sockets y pressing the button, attached tools are easily released with just one hand over plates made of chrome-plated steel 8816 N i jdrive 10 = 3, heads polished DIN 3123, ISO , Impact all Joint i jdrive 10 = 3 special steel Surface burnished 8806 S 51, i jdrive 10 = 3 Special Steel Surface burnished 8805 S S Flexible Extension i drive 10 = 3 Flexible shaft enables getting over obstacles and borders and allows fast working even in areas with restricted access omponents and Spare Parts see pages 20 to 29 93

16 Sockets and Socket Sets 2 Adapter DIN 3123, ISO 3316 i drive 12.5 = i drive 6.3 = Impact Adapter special steel Surface phosphatized 1 K j 880 S 28,0 10 = i drive 12.5 = S-1 35,5 10 = Impact Adapter O-Ring and onnecting Pin 1 For Sockets j drive 10 = mm, E 5-E S-H 612? 2,5 x For Sockets j drive 10 = mm, extensions, universal joints, adapters 880 S-H 131? 2,5 x Safety Spring For impact sockets according to DIN For Sockets j drive 10 = mm, E 5 E S-HF 612? 16, For Sockets j drive 10 = mm extensions, universal joints, adapters 880 S-HF 1319? 18, Socket Rail Socket Rail 10 pcs. 6-Point Sockets H pcs. 6-Point Sockets, long style 880 Lg Lg10 H pcs. 12-Point Sockets 880 TZ TZ10 H pcs. 6-Point Sockets with universal joint 880 G G10 H s for inside hexagon screws H s for inside TORX screws 8802-T 15 T 20 T 25 T 2 T 30 T 0 T 5 T T8 H Empty, with 16 clips, suitable for sockets of 880 series 880 HL Magnetic Socket Rail, empty i drive 10 = 3 (DIN 3121) g 8 = 5 For impact sockets with j drive 10 = 3 1 K j 8808 S = O-Ring and onnecting Pin 1 For Sockets j drive 10 = mm, E 5-E S-G 612? 13 x 3, For Sockets j drive 10 = mm, extensions, universal joints, adapters 880 S-G 131? 16 x 3,5 013 i drive 10 = 3 Easy installation: 2 bore holes, e.g. for wall fixation Holding clamps adapted to the drive size lear arrangement on rail keeps sockets always ready to hand Made of metal 10 exchangeable holding squares well-suited to the drive size (j 10 = 3 ) With magnetic back for fixation on, e.g. tool trolleys or in tool trolley s drawers (exactly fitting into the drawers of HAZET tool trolleys Assistent ) Safe fixation of the sockets due to special locking system (ball clamping) in the holding square. Locking release by turning the socket by 90. lear arrangement sockets are always ready to hand Rail made of metal, clips made of plastic 880 MH L omponents and Spare Parts see pages 20 to 29

17 Sockets and Socket Sets W 29 x 121 x mm 3 x 188 x 56 mm 29 x 121 x mm 16 pieces P Especially for motorcycles, motorboats, etc. j drive 6.3 = 1 j drive 10 = 3 with integrated handle 6 pieces 850-,5 5 5, P 866 U P PH 1 PH PZ 1 PZ Additionally with Spark Plug Sockets 21 pieces A KF 880 KF 8816 P N N Neb6 blk 3 x 188 x 56 mm 3 x 188 x 56 mm 3 x 188 x 56 mm with integrated handle 22 pieces P Especially suitable for maintenance work on modern cars requiring the use of different screw profiles j drive 6.3 = 1 j drive 10 = 3 6-Point Sockets TORX Sockets s for inside hexagon and inside TORX screws with integrated handle 6 pieces E 6 E E 8 E P 866 U E 11 E 12 E P T 10 T 15 T 20 T 25 T 2 T 30 T T 5 T Additionally with s with integrated handle 32 pieces x 5,5 1,2 x 8 1,6 x PH 1 PH 2 PH P N omponents and Spare Parts see pages 20 to 29 95

18 Sockets and Socket Sets 2 Socket Set (12-Point) Socket Set (12-Point) blk 29 x 121 x mm 29 x 121 x mm 58 x 235 x 88 mm Additionally with Spark Plug Sockets 1 pieces 880 A KF 880 A KF 8816 P A N Additionally with Spark Plug Sockets 1 pieces 880 A AZ KF 880 A KF 8816 P AZ N Additionally with s In blue sheet metal box with plastic insert 58 pieces Z TZ x 5,5 1,2 x 8 1,6 x PH 2 PH 3 PH P ZN 0265 Socket Set (12-Point) blk Socket Set (12-Point) b LK 16 pieces 29 x 121 x mm 880 Z P Z N In blue sheet metal box with plastic insert 58 pieces Lg x 5,5 1,2 x 8 1,6 x PH 2 PH 3 PH U P N x 235 x 88 mm Additionally with s With blank moulds for additional tools In blue sheet metal box with plastic insert 9 pieces 880 A AZ A Lg Lg-20,8 ( 13 ) 8801 A x 5,5 1,2 x 8 1,6 x PH 2 PH 3 PH U P A ZN x 235 x 88 mm 3 96 omponents and Spare Parts see pages 20 to 29

19 Sockets and Socket Sets 3 HAZET Range of 3 Sockets Fine-Tooth Reversible Ratchets Reversible Ratchets with Hinge Joint»Komposit«Reversible Ratchets Telescopic Reversible Ratchet Socket Sets Sockets Screwdriver Sockets Extensions and many more. Telescopic Reversible Ratchet Fine-Tooth Reversible Ratchet With quick-release press-button Actuation angle 5, 2 teeth Reversible Ratchet With locking device and quick-release press-button 2-component handle providing a better grip Telescopic length continuously adjustable from 10 to 590 mm Low expenditure of force due to longer lever arm Socket Sets Sockets 3 Long style omponents and Spare Parts see pages 20 to 29 9

20 Sockets and Socket Sets 3 6-Point Socket With Traction profile DIN 312, ISO * = not according to DIN * 38,0 12,0 22,0, * 38,0 13,5 22,0 8, ,0 1,9 22,0 10, ,0 16, 22,0 10, ,0 1,5 22,0 11, ,0 18,8 22,0 11, ,0 20,3 22,5 11, ,0 21,5 23,2 11, ,0 22, 23,6 12, ,0 2,1 22,0 12, ,0 25, 22, 1, ,0 26,6 23,0 1, ,0 2,8 2,0 1, ,0 29,0 25,0 1, ,5 30, 26,0 1, ,5 31, 26,0 1, ,0 32,6 26,0 18, ,0 33,9 26,0 1, ,0 35,1 2,0 1, ,0 36,2 25,0 19, ,0 3,5 26,0 20, * 50,0 38, 2,0 23, ,0 0,1 28,0 23, ,0 2,3 28,0 23, * 52,0 6,0 28,0 23, Impact Socket (6-Point) Suitable for all types of electric and pneumatic screwdrivers (rotary and impact wrenches) For excessive use special steel Surface phosphatized DIN 3129, ISO $ $ + = reinforced design, with deep hexagon profile for wheel nutsbolts 900 S ,3 25 6, S ,8 25 6, S ,1 25 8, S ,5 25 8, S , , S , , S , , S , , S , , S-1 R ,0 30 1, Impact Socket (6-Point) $ * = not according to DIN + = reinforced design, with deep hexagon profile for wheel nutsbolts 900 S , , S , , S-19 R , , S-20 * 0 29, , S-20 31, , S , , S-23 * 0 33, , S-2 35,0 30 1, S-2 R , , S-25 * 36, , S-26 * 3, , S , , S , S-32 * , Point Socket With Traction Profile 900 A- 3 38,0 1,5 22,0 10, A- 38,0 16, 22,0 10, A ,0 18,3 22,0 11, A- 9 38,0 20,5 22,5 11, A- 5 38,0 22, 23,6 12, A ,0 2,6 22,0 12, A- 3 38,0 26,8 23,0 1, A ,0 28,6 25,0 1, A- 1,5 30, 26,0 1, A- 15,0 32,6 26,0 20, A-,0 3,6 2,5 20, A ,0 36,3 25,0 21, A-1. 1,0 38,2 26,5 22, A ,0 0,0 28,0 25, A ,0 2,3 28,0 2, Long style With Traction Profile DIN 312, ISO $ 6-Point Socket * = not according to DIN + = with rubber ply for spark plugs 900 Lg-10 * 85 1, Lg-11 * 85 16, 22 11, Lg-12 * 85 1,5 22,0 12, Lg ,8 22,0 13, Lg ,9 22,5 1, Lg ,5 23,2 15, Lg , 23,6 16, Lg ,1 23,6 19, Lg ,6 23, Lg ,5 26, Lg ,5 2, Lg ,6 2, Lg , 25, Lg ,6 2, Lg ,1 29, Lg ,3 30, Lg ,1 33, Lg ,5 35 3, Impact Socket (6-Point) Long style special steel Surface phosphatized + = reinforced style with deep hexagon for wheel nutsscrews 900 S Lg , , S Lg , , S Lg , , S Lg , , S Lg , , S Lg , , S Lg ,3 30 1, S Lg ,5 30 1, S Lg ,0 30 1, S Lg , , Especially for mounting and dismounting wheels Long and extra-slim style 901 S Lg , S Lg , S Lg , S Lg ,5 30 1, $ $ $ 98 omponents and Spare Parts see pages 20 to 29

21 Sockets and Socket Sets Magnetic Holder with Sockets 8 Impact Socket (6-Point) Especially for mounting and dismounting wheels Long style With plastic insert to protect the surface of the wheel bolts Additionally with outside plastic sleeve to protect the rims when screwing the wheel bolts olour-coded plastic sleeve facilitates finding the correct socket size Replaceable plastic sleeve Impact Socket (6-Point) Long style for wheel boltsnuts on e.g. Japanese and American vehicles special steel Surface phosphatized 900 A S Lg ,3 30 1, Point Socket % Impact sockets for all current wheel bolts always ready to hand With magnetic holder fixation, e.g. on Tool Trolley or car lift special steel Surface phosphatized pieces 901 S Lg S Lg S Lg HL Impact Socket (6-Point) Especially for mounting and dismounting wheels Long and extra-slim style With plastic insert to protect the surface of the wheel bolts Ä 1 = e.g. for wheel bolts on MEREDES-ENZ passenger cars 902 S Lg , S Lg , $ 903 S Lg-15: especially for SMART For Two 903 S Lg S Lg S Lg Especially forjapanese cars and SMART For Four 903 S Lg Set of 3 pieces: 903 S Lg S Lg Plastic Sleeve white,for 903 S Lg S Lg blue, for 903 S Lg S Lg yellow, for 903 S Lg S Lg red, for 903 S Lg S Lg Impact Socket (6-Point) $ Especially for mounting and dismounting wheels on AMG-rims andor alloy rims with deeply located wheel bolts Extra long style With plastic insert to protect the surface of the wheel bolts In addition with outside plastic sleeve to protect the rims when screwing the wheel bolts Replaceable plastic sleeve 90 S Lg , , With Traction Profile DIN 312, ISO * = not according to DIN 900 Z- 8 * 38,0 12,0 22,0, Z- 9 * 38,0 13,5 22,0 8, Z-10 38,0 1,9 22,0 10, Z-11 38,0 16, 22,0 10, Z-12 38,0 1,5 22,0 11, Z-13 38,0 18,8 22,0 11, Z-1 38,0 20,3 22,5 11, Z-15 38,0 21,5 23,2 11, Z-16 38,0 22, 23,6 12, Z-1 38,0 2,1 22,0 12, Z-18 38,0 25, 22, 1, Z-19 38,0 26,6 23,0 1, Z-20 38,0 2,8 2,0 1, Z-21 38,0 29,0 25,0 1, Z-22 1,5 30, 25,0 1, Z-23 1,5 31, 26,0 1, Z-2,0 32,6 26,0 20, Z-25,0 33,9 26,5 20, Z-26,0 35,1 2,0 20, Z-2 6,0 36,2 25,0 21, Z-28,0 3,5 26,0 22, Z-29 * 50,0 38, 2,0 25, Z-30 50,0 0,1 28,0 25, Z-32 50,0 2,3 28,0 2, Z-33 * 50,0 3,6 28,0 2, Z-3 52,0 6,0 28,0 23,3 192 omponents and Spare Parts see pages 20 to the demonstration van is coming!

22 Sockets and Socket Sets 3 Impact Socket (12-Point) special steel Surface phosphatized 900 S Z ,5 25 6, S Z ,8 25 6, S Z ,1 25 9, S Z ,5 30 9, S Z ,8 30 9, S Z ,2 30 9, S Z , , S Z , , S Z ,3 11, S Z ,5 11, S Z , S Z , Ä 30 for the axle shaft nut on VW Golf, Polo, New eetle, AUDI TT 1.8, SKODA Octavia, Superb, Fabia 900 S Z Ä 32 for the operation of the propeller shaft screws in the wheel hub on Touareg since S Z , S Z Ä 36 for the axle shaft nut on MW 3, 5 and -series, Z3, M3, VW Polo since 2001, SEAT Ibiza since S Z % 12-Point Socket Long style With Traction Profile DIN 312, ISO * = not according to DIN + = with rubber ply for spark plugs 900 TZ-10 * 85 1,9 22, TZ-11 * 85 16, 22,0 11, TZ-12 * 85 1,5 22,0 12, TZ ,8 22,0 13, TZ ,9 22,5 15, TZ ,5 23,2 15, TZ , 23, TZ ,1 23, TZ ,6 23, TZ ,8 26, TZ ,6 2, TZ ,6 2, TZ , 25, TZ ,6 2, TZ ,3 30, TZ ,1 33, % h Socket 1 r K G H 900-E 10 9,2 38,0 13, E 11 10,08 38,0 1, E 12 11,1 38,0 1, E 1 12,90 38,0 16, E 16 1,6 38,0 19, E 18 16,0 38,0 21, E 20 18,5 38,0 23, E 2 22,16 1,2 28, ,1 10,0 15, E 1 12,90 190,0 16, h Socket Set 5 pieces in plastic drawer insert (112) 900-E 10, E 12, E 1, E 16, E E h Impact Socket 12-Point Socket 900 AZ- 3 38,0 1,5 22,0 10, AZ- 38,0 16, 22,0 10, AZ ,0 18,3 22,0 11, AZ- 9 38,0 20,5 22,5 11, AZ ,0 21,5 23,2 11, AZ- 5 38,0 22, 23,6 12, AZ ,0 2,6 22,0 12, AZ- 3 38,0 26,8 23,0 1, AZ ,0 2,8 2,0 1, AZ ,0 28,6 25,0 1, AZ- 1,5 30, 26,0 1, AZ- 15,0 32,6 26,0 20, AZ ,0 33, 2,6 20, AZ-,0 3,6 2,8 20, AZ ,0 36,3 25,0 21, AZ-1. 1,0 38,2 26,5 22, AZ ,0 0,1 28,0 25, AZ ,0 2,3 28,0 2, Long style With Traction Profile + = with rubber ply for spark plugs 900 TAZ ,3 22,0 13, TAZ ,5 22,5 15, TAZ , 23, TAZ ,6 23, TAZ ,8 26, TAZ , 25, TAZ ,6 2, TAZ ,6 29, h Socket For outside TORX screws % For outside TORX screws special steel Surface phosphatized 1 r K G H 900 S-E 10 9,2 38,0 1, S-E 12 11,1 38,0 15, S-E 1 12,90 38,0 1, S-E 16 1,6 38,0 20, S-E 18 16,0 38,0 22, S-E 20 18,5 38,0 2, S-E 2 22,16 1,2 30, Spark Plug Socket (6-Point) For spark plug changing Long style With permanent magnet I 100 omponents and Spare Parts see pages 20 to 29

23 Sockets and Socket Sets Spark Plug Socket (6-Point) 1 S T K G 900 Mg T 20, , A Mg T 16, , For spark plug changing With fixing clamp Fixing clamp reduces damage to insulators 1 S T K G 900 KF 20, , A KF 16, , I I Speeder i drive 12.5 = Flexible Handle i drive 12.5 = Reversible Ratchet 916 SP i drive 12.5 = 1 2 With locking device and quick-release press-button Ratchet wheel 32 teeth Safe locking of the sockets y pressing the button, attached tools are easily released with just one hand 2-component handle for more safety, heads polished 916 S Reversible Ratchet with Hinge Joint Sliding T-Handle Fixing lamp for 880 KF, 900 KF, 6 KF 880 KF Fixing lamp for 880 A KF, 900 A KF, 66, 66-1, 6 A KF 880 A KF INFORMATION Fixing lamp i drive 12.5 = Fine-Tooth Reversible Ratchet i drive 12.5 = 1 2 With 2 teeth, actuation angle 5, enables working in areas with restricted access With locking device and quick-release press-button 2-component handle for more security 916 F Short style With hinge joint i drive 12.5 = 1 2 Ratchet wheel 32 teeth 2-component handle for more safety 916 GK Telescopic Reversible Ratchet Stainless and insensitive to heat Largest possible clearance of insulator minimization of possible breaks 6 spring elements firm hold of the plugs Damping of transverse motion Reversible Ratchet i drive 12.5 = 1 2 Ratchet wheel 32 teeth 2-component handle for more security omponents and Spare Parts see pages 20 to ontinuously adjustable from 10 to 590 mm Long lever arm reducing the expenditure of force Especially appropriate for commercial vehicles, agricultural machinery and industrial installations Max. torque 600 Nm Easy fixation with knurled ring i drive 12.5 = 1 2 Ratchet wheel 32 teeth, heads polished 916 Lg

24 Sockets and Socket Sets 3»Komposit«Reversible Ratchet Extension Impact Extension i drive 12.5 = 1 2 With locking device and quick-release press-button hange-over switch on the handle enables one-hand operation omponents are easily replaceable due to Komposit construction Shock resistant plastic body Ergonomic design Smooth-running ratchet wheel (32 teeth) Safe locking of the sockets y pressing the button, attached tools are easily released - with just one hand over plates made of chrome-plated steel 916 N Repair Set Repair Set for ratchet wheel 12.5 = 1 2 i consisting of: shift lever, 2 screws, ball, compression spring, ratchet wheel and pawl for 916 S as well as for re-equipping 916 SP and 916 GK 916S Repair Set for shift lever 12.5 = 1 2 i consisting of: shift lever, 2 screws, ball, compression spring and pawl for 916 S, 916 SP, 916 GK, 916 Lg 916 SP6 162 Repair Set for ratchet wheel 12.5 = 1 2 i consisting of: shift lever, screws, ball, compression spring, ratchet wheel and pawl for 916 SP, 916 GK, 916 Lg 916 SP Repair Set for ratchet wheel 12.5 = 1 2 i consisting of: ratchet wheel with quick-release press-button, pawl, cap screws, 1 holding down bolt each (small and large), for 916 N 916 N Extension i jdrive 12.5 = 1 2, heads polished DIN 3123, ISO i jdrive 12.5 = 1 2, heads polished DIN 3123, ISO Adapter Extension For operating deeply located screws, e.g. on gearboxes i drive 10 = Wobble Extension i jdrive 12.5 = 1 2 With ball shaped, conical outside square drive allowing 12.5 angular movement to every side y attaching a socket until its limit stop is reached, the wobble extension may also be used as rigid extension Flexible shaft allows to get over obstacles and borders in areas with restricted access, polished Wobble Extension Set ardboard packed 3 pieces i jdrive 12.5 = 1 2 special steel Surface phosphatized 9005 S S S Universal Joint i jdrive 12.5 = 1 2, heads polished DIN 3123, ISO Impact all Joint i jdrive 12.5 = 1 2 special steel Surface burnished 9006 S Adapter DIN 3123, ISO 3316 i drive 20 = i drive 10 = omponents and Spare Parts see pages 20 to 29

25 Sockets and Socket Sets Adapter Set Magnetic Socket Insert Set b8 In HAZET plastic drawer insert, 6 pieces, 1 adapter each Plastic drawer insert empty for PL Impact Adapter Holds nuts and screws firmly in the socket Inserts made of plastic with integrated magnet Powerful retention force Universal application in all metric 6-point and 12-point sockets Ä 10 up to 19 mm Easily inserted and removed Reusable 10 pieces, for metric sockets Ä mm 960 MgT For inside hexagon screws In sheet metal box with plastic insert 12 parts SP special steel Surface phosphatized i drive 10 = S i drive 20 = S Impact Adapter i drive 12.5 = 1 2 (DIN 3121) g E 11 = (DIN 3126) For impact sockets with j drive 12.5 = S i drive 12.5 = 1 2 (DIN 3121) g E 8 = 5 For impact sockets with j drive 12.5 = S For slotted screws 1 M N F x 13 21, , x 19 20, , 06 For inside hexagon screws lades made of special steel DIN 22 * = not according to DIN 1 M N O F 985- * * * * For inside hexagon screws lades made of special steel DIN 22 * = not according to DIN 1 M N F S 986- * * , , * , * , , For inside hexagon screws lades made of special steel 1 M N F 986 A A A A A A A A omponents and Spare Parts see pages 20 to

26 Sockets and Socket Sets 3 1 M N F S Long style For inside hexagon screws lades made of special steel DIN Lg-5 6 with offset blade * = not according to DIN 1 M N F S 986 Lg- 5 * , Lg , Lg , Lg , Lg , KK KK KK KK KK KK , Set b8 For Phillips-Recess screws PH lades made of special steel Tips according to DIN ISO M N F 988-PH PH PH For installing and removing the fuel filter on VWAUDI diesel engines with engine code AJM since (Passat 5, Golf, ora, AUDI A3 and A), as well as SEAT and SKODA diesel engines Also suitable for fuel filter draining 1 M N F S 986 Lg , s for inside hexagon screws In sheet metal box with plastic insert 9 parts pieces, in plastic drawer insert (112) P b8 Short style For screws with internal serration XZN lades made of special steel DIN & M N F , , For installing and removing the wheel hub bearing at the rear axle AUDI A 3 since 200 VW Touran since F Extra long style For inside hexagon screws lades made of special steel 1 M N F S 986 S Lg S Lg pieces, in plastic drawer insert (212) 986 KK KK-P b8 b8 Long style For screws with internal serration XZN lades made of special steel DIN Lg- 8 e.g. for drive shafts on VW-AUDI 990 Lg- 9 for cylinder head bolts on TOYOTA orolla 1. l and YARIS 1.0 l 990 Lg-1 for cylinder head bolts on VM diesel engines, e.g. HRYSLER 1 & M N F 990 Lg Lg Lg Lg Lg Lg pieces, in plastic drawer insert (312) J With ball hex, especially for working in areas with restricted access (e.g. engine compartment) For inside hexagon screws lades made of special steel 986 Lg S Lg S Lg-P Extra long style For screws with internal serration XZN 10 omponents and Spare Parts see pages 20 to 29

27 Sockets and Socket Sets lades made of special steel For cylinder head bolts on engines of different car types, e.g. VW-AUDI, OPEL, TOYOTA DIN & M N F 990 S Lg S Lg Set For screws with internal serration XZN In blue sheet metal box with plastic insert 9 pieces pieces, in plastic drawer insert (112) P pieces, in plastic drawer insert (112) 990 Lg S Lg S Lg-P For spline socket screws RIE V lades made of special steel 1 & M N F J PR 8 P8 P8 JR 1 & M N F For car body and engine work on FIAT e.g. for valve and spark plug covers FIAT engines 1.2 8V 16 V For cylinder head bolts on FIAT 2.0 engines For cylinder head bolts on ALFA, e.g V engines , , ,6 03 JR h Short style For inside TORX screws lades made of special steel 1 r M N F 992-T 20 3, T 25, T 2, T 30 5, T 0 6, T 5, T 50 8, T 55 11, , T 60 13, , Short style With front bore hole For tamper resistant TORX screws (inside TORX screws with pin) lades made of special steel 1 r M N F 992-T 20 H 3, T 25 H, T 2 H, T 30 H 5, T 0 H 6, T 5 H, T 50 H 8, T 55 H 11, T 60 H 13, JF omponents and Spare Parts see pages 20 to Set O8 5 pieces, in plastic drawer insert (112) 992-T 30 H T 0 H T 5 H T 50 H T 55 H Set O8 992 H-P h J Long style For inside TORX screws lades made of special steel T 0: for cylinder head bolts on FORD 1.8 l diesel (Turbo), Fiesta, Escort, Sierra 1 r M N F 992 Lg-T 50 8, Lg-T 55 11, , Lg-T 60 13, Lg-T 0 15, , Extra long style For inside TORX screws lades made of special steel T5: For intake bridge FORD Scorpio 2., 2.8 and 2.9 l injection engine, VW Passat gearbox types 02 A, 1.6, 1.8 and 2.0 l T55: For cylinder head bolts on various FORD engines, e.g. Mondeo 16 V 1 r M N F 992 S Lg-T 0 6, S Lg-T 5, S Lg-T 50 8, S Lg-T 55 11, h Set N8 For inside TORX screws In blue sheet metal box with plastic insert 9 pieces 992-T 20 T 25 T 2 T 30 T 0 T 5 T 50 T 55 T

28 Sockets and Socket Sets 3 O-Ring h Impact Screwdriver Socket Für inside TORX screws special steel Surface phosphatized 1 r M N F 995 S-T 30 5,52 21, 0 25, S-T 0 6,65 21,0 25, S-T 5,82 21,0 25, S-T 50 8,83 22, 0 25, S-T 55 11,22 22, 0 25, S-T 60 13,25 22,0 25,1 01 and onnecting Pin 8 1 For sockets j drive 12.5 = mm, 13 mm long style, E 10 E 16, T 30 T S-G 101? 19 x 0689 For sockets j drive 12.5 = mm, 16 2 mm long style, E 18 E 2, extensions, universal joints, adapters 900 S-G 152? 2 x 0696 For sockets j drive 12.5 = mm, 13 mm long style, E 10 E 16, T 30 T S-H 101? 3 x For sockets j drive 12.5 = mm, 16 2 mm long style, E 18 E 2, extensions, universal joints, adapters 900 S-H 152? 3 x Safety Spring For impact sockets according to DIN For sockets j drive 12.5 = mm, E 10 E S-HF 81? For sockets j drive 12.5 = mm, E 18 2, extensions, universal joints, adapters 900 S-HF 1530? Socket Rail $ 8 Easy installation: 2 bore holes, e.g. for wall fixation Holding clamps adapted to the drive size lear arrangement on rail keeps sockets always ready to hand Made of metal 1 6-Point Sockets H Empty, with 16 socket clips suitable for sockets of 900 series 900 HL Magnetic Socket Rail, empty 10 exchangeable holding squares well-suited to the drive size (i 12.5 = 1 2 ) With magnetic back for fixation on, e.g. tool trolley or in tool trolley s drawers (exactly fitting into drawers of HAZET tool trolley Assistent ) Safe fixation of the sockets due to special locking system (ball clamping) in the holding square. Locking release by turning the socket by 90. lear arrangement sockets are always ready to hand Rail made of metal, clips made of plastic 900 MH L $ with integrated handle all tools are snugly embedded 25 pieces 8 $ SP $ with integrated handle all tools are snugly embedded 1 pieces SP x 216 x 65 mm 8 $ 3 x 188 x 56 mm Socket Rail $ 8 10 x 216 x 65 mm with integrated handle all tools are snugly embedded 15 pieces SP N omponents and Spare Parts see pages 20 to 29

29 68$ Sockets and Socket Sets 3 8 Socket Set (12-Point) 8 % x 188 x 56 mm 10 x 216 x 65 mm 10 x 216 x 65 mm ombinational set with j drive 6.3 = 1 and j drive 12.5 = 1 2 with integrated handle all tools are snugly embedded 23 pieces , P SP N 0660 with integrated handle all tools are snugly embedded 20 pieces 900 A SP A N with integrated handle all tools are snugly embedded 1 pieces 900 Z SP Z 0595 NbLM8$ Socket Set (12-Point) 8 % Socket Set (12-Point) 8 % 10 x 216 x 65 mm 10 x 216 x 65 mm 10 x 216 x 65 mm Additionally with screwdriver sockets, bits and adapter with integrated handle all tools are snugly embedded pieces SP PH 1 PH 2 PH 3 PH 2218-PZ 1 PZ 2 PZ 3 PZ 222-T 2 T 30 T 0 T 5 T N with integrated handle all tools are snugly embedded 25 pieces 900 Z SP Z 050 with integrated handle all tools are snugly embedded 23 pieces 900 AZ SP A Z omponents and Spare Parts see pages 20 to 29 10

30 Sockets and Socket Sets 3 Socket Set (12-Point) 8 8 $ Socket Set (12-Point) 8 10 x 216 x 65 mm 35 x 215 x 62 mm 35 x 215 x 62 mm with integrated handle all tools are snugly embedded 18 pieces 900 AZ SP AZ N In sheet metal box with plastic insert 31 pieces SP x In sheet metal box with plastic insert 26 pieces 900 AZ SP x AZ Socket Set (12-Point) 8 Socket Set (12-Point) 8 % Impact 8 10 x 216 x 65 mm 35 x 215 x 62 mm 35 x 215 x 59 mm American and metric sizes with integrated handle all tools are snugly embedded 36 pieces 900 Z AZ SP AM Z In sheet metal box with plastic insert 31 pieces 900 Z SP x Z 058 In sheet metal box With plastic insert 23 pieces 900 S S Lg HF 1530 HF S S 900 S omponents and Spare Parts see pages 20 to 29

31 Sockets and Socket Sets 5 HAZET Range of 5Sockets Socket Sets Reversible Ratchet Heads Sockets s ( only) Universal Joints Extensions, Adapters and many more omponents and Spare Parts see pages 20 to

32 Sockets and Socket Sets 5 6-Point Socket j drive 20 = 3 With locking pin DIN 312, ISO * = not according to DIN * 52,0 28,0 33,2 1, ,0 31,0 33,2 1, * 52,0 32,0 33,2 13, ,0 3,0 36,0 16, ,0 38,0 35,0 18, ,0 2,0 36,0 21, ,0,5 36,0 23, ,0 6,0 36,0 23, ,0,5 36,0 2, ,5 9,5 36,0 25, * 65,0 52,5 36,0 28, ,5 55,5 39,0 31, * 0,0 5,5 1,0 31, ,0 62,0,0 3, ,0 6,0 5,0 3, * 82,0 3,5 5,0 0, * 88,0 80,0 5,0, Impact Socket (6-Point) Suitable for all types of electric and pneumatic screwdrivers (rotary and impact wrenches) For excessive use j drive 20 = 3 special steel Surface phosphatized DIN 3129, ISO * = not according to DIN 1 K G H f 1000 S , S , S , S , S , S-2 53, S-28 * 5 5, S-30 5, S , S-33 * 5 51, S , S , S-38 * 58 58, Impact Socket (6-Point) Long style j drive 20 = S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , Long style, e.g. for deeply located wheel nutsbolts on commercial vehicles j drive 20 = S S S S , S , S , Point Socket j drive 20 = 3 With locking pin DIN 312, ISO U 12-Point Socket * = not according to DIN 1000 Z-19 * 52,0 28,0 33,2 1, Z-21 52,0 31,0 33,2 1, Z-22 * 52,0 32,0 33,2 13, Z-2 52,0 3,0 36,0 16, Z-2 5,0 38,0 35,0 18, Z-30 55,0 2,0 36,0 21, Z-32 58,0,5 36,0 23, Z-3 60,0,5 36,0 2, Z-35 * 61,5 8,5 35,5 25, Z-36 61,5 9,5 36,0 25, Z-38 * 65,0 52,5 38,0 28, Z-1 68,5 55,5 39,0 31, Z-6 3,0 62,0,0 3, Z-50 6,0 6,0 5,0 3, Z-55 82,0 8,5 5,0 0, Z-60 88,0 80,0 5,0, Point Socket j drive 20 = 3 With locking pin 1000 AZ- 3 52,0 28,0 33,2 1, AZ- 52,0 32,0 33,2 13, AZ ,0 3,0 36,0 16, AZ-1 52,0 36,5 33,2 16, AZ ,0 38,0 35,0 18, AZ ,0 0,0 36,0 20, AZ ,0 2,0 36,0 21, AZ ,0,5 36,0 23, AZ ,0 6,0 36,0 23, AZ ,5 8,5 36,0 25, AZ-1. 63,0 50,0 36,0 2, AZ ,0 52,5 38,0 28, AZ ,5 55,5 39,0 31, AZ ,0 58,0 1,0 33, AZ ,0 60,0 1,0 33, AZ ,0 62,0,0 3, AZ-1. 3,0 6,0 5,0 35, AZ-2 8,0 68,0 5,0 38, AZ ,0 6,5 5,0 2, j drive 20 = 3 For inside hexagon screws With locking pin 110 omponents and Spare Parts see pages 20 to 29

33 Sockets and Socket Sets , tips burnished DIN 22 1 M N O F , 5,5 2, , 5,5 2, , 56,5 29, , 56,5 29, h U For the operation of inside TORX screws, e.g. on commercial vehicles and agricultural machinery Application, e.g. at the front axle: screws of the steering tie lever on commercial vehicles MAN 1012-T 80 for M series 1012-T 100 for F series lades made of special steel 1 M N r 1012-T , T , T , T , T , Handle ar Handle ar with Sliding Head i drive 20 = 3 2 pieces HAZET Handle ar 101 and Sliding Head Reversible Ratchet Head i drive 20 = 3 i with ball and locking pin Shank with locking pin Ratchet wheel 32 teeth Reversible Ratchet with Handle ar 101 P Extension i jdrive 20 = 3 i with ball and locking pin j with locking pin = DIN 3123, ISO ijdrive 20 = 3 DIN 3123, ISO With ball and locking pin For HAZET Sliding Head or HAZET Ratchet Head With HAZET-ergonomic plastic handle With locking pin For HAZET Sliding Head or HAZET Ratchet Head P Sliding Head Repair Set for shift lever, consisting of: shift lever, screws, ball, compression spring for 1016, 10162, T, 613 T, T, , 61 T, 61-1 T, T, T, , T Repair Set for ratchet wheel 20 = 3 i consisting of: ratchet wheel, pawl, shift lever, screws, ball, compression spring for 1016, 10162, T, 613 T, , T, 61 T, 61-01, 61-1 T, 615 T, , T, T N Impact Extension i jdrive 20 = 3 special steel Surface burnished 1005 S S S Universal Joint Reversible Ratchet with Handle ar i drive 20 = 3 With ball locking device For HAZET Handle ar 101 or 101 P i drive 20 = 3 i jdrive 20 = 3 i with ball and locking pin j with locking pin DIN 3123, ISO omponents and Spare Parts see pages 20 to

34 Sockets and Socket Sets 5 Impact all Joint i jdrive 20 = 3 special steel Surface burnished 1006 S Adapter j drive 20 = 3 j with locking pin DIN 3123, ISO 3316 i drive 25 = 1 with locking pin , i drive 12.5 = 1 2 with locking ball, square replaceable , Impact Adapter For impact operation j drive 20 = 3 special steel Surface phosphatized i drive 12.5 = S i drive 25 = S O-Ring and onnecting Pin 9 1 For all j connections 20 = S-G 136? 36 x S-H 136? x j drive 20 = 3 In sheet metal box with plastic insert 15 pieces j drive 20 = 3 In sheet metal box with plastic insert 18 pieces Socket Set (12-Point) 9 Socket Set (12-Point) j drive 20 = 3 In sheet metal box with plastic insert 15 pieces Z Z 001 j drive 20 = 3 In sheet metal box with plastic insert 18 pieces Z Z 0013 j drive 20 = 3 In sheet metal box with plastic insert 21 pieces AZ AZ omponents and Spare Parts see pages 20 to 29

35 Sockets and Socket Sets Point Socket j drive 25 = 1 With locking pin DIN 312, ISO * = not according to DIN 1100 Z-32 * 6 8,0 6 23, Z-3 * 68 51,0 6 23, Z-36 * 66 52,0 8 29, Z-1 0 5,0 8 32, Z ,0 8 3, Z ,0 8 3, Z-55 85,0 8 39, Z ,0 8 2, Z ,0 60 8, Z , , Z , , Z , , Impact Socket (6-Point) Especially long style e.g. for deeply located wheel nutsbolts on commercial vehicles j drive 25 = S , U Impact Socket (6-Point) * = not according to DIN 1 K G H f 1100 S-33 * 63 52, S , S , S-38 * 0 59, S , S , S-50 82, S , S , Long style j drive 25 = 1 special steel Surface phosphatized 1 K G H f 1100 S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , S Lg , Handle ar With ball and locking pin For HAZET Sliding Head or HAZET Ratchet Head Handle ar with Sliding Head i drive 25 = 1 2 pieces: HAZET Handle ar 111 and HAZET Sliding Head Reversible Ratchet Head i drive 25 = 1 i with ball and locking pin Shank with locking pin Ratchet wheel 32 teeth Repair Set for shift lever consisting of: shift lever, screws, ball, compression spring for 1116, T Repair Set for ratchet wheel 25 = 1 i consisting of: shift lever, screws, ball, compression spring, pawl, ratchet wheel for N Sliding Head Reversible Ratchet with Handle ar Suitable for all types of electric and pneumatic screwdrivers (rotary and impact wrenches) For excessive use j drive 25 = 1 special steel Surface phosphatized DIN 3129, ISO K G H f 1100 S , S , S , S , i drive 25 = 1 With ball locking device For HAZET Handle ar i drive 25 = omponents and Spare Parts see pages 20 to

36 Sockets and Socket Sets 5 Extension i jdrive 25 = 1 i with ball and locking pin j with locking pin DIN 3123, ISO Impact Extension Adapter j drive 25 = 1 j with locking pin i drive 20 = 3 i with ball and locking pin DIN 3123, ISO Impact Adapter Tool ase TORX Tools Practical and exclusive Slim-Line case Assortment, 56 parts for universal application see page 8 A h Screw Driving Tool Set Ne i jdrive 25 = 1 special steel Surface phosphatized 1105 S S Universal Joint i jdrive 25 = 1 i with ball and locking pin j with locking pin j drive 25 = 1 i drive 20 = 3 special steel Surface phosphatized 110 S O-Ring and onnecting Pin 0 1 For all j connections 25 = S-G 2260? 5 x S-H 2260? 5 x Socket Set (12-Point) 5 j drive 6.3 = 1 and 12.5 = 1 2 ommon tools for inside and outside TORX screws In sheet metal case With plastic insert 6 pieces 609-E 6 x E 8 E 10 x E 12 E 1 x E 18 E 20 x E T 6 T 8 T 10 T 15 T 20 T 25 T E E 5 E 6 E 8 E S-E E 5 E 6 E 8 E E 10 E 12 E 1 E 18 E 20 E S-E 10 E 12 E 1 E 18 E 20 E T 0 T 5 T 50 T 55 T S-T 30 T 0 T 50 T 55 T T 8 T 10 T 15 T 20 T 25 T 2 T 30 T 5 T 50 T 55 T T 8 T 9 T 10 T 15 T 20 T 25 T T 0 T 5 T Impact all Joint Ne 8 i jdrive 25 = 1 special steel Surface burnished 1106 S Adapter j drive 25 = 1 In sheet metal box 1 pieces 1100 Z Z For inside and outside TORX screws In sheet metal case With plastic insert 9 pieces 900-E 10 E 12 E 1 E T 30 T 0 T 5 T 50 T N omponents and Spare Parts see pages 20 to 29

37 HAZET TORX Tools TORX Tools Screw Driving Tool Sets Double ox-end Wrenches TORX Screwdrivers TORX j Screwdrivers TORX Screwdriver Sets for Electricians TORX Sockets 123 TORX Offset Screwdrivers TORX Screwdriver its omparison Hexagon Profile HAZET TORX high notch fatigue linear contact narrow wrench impact range no notch fatigue low surface pressure contact area wide wrench impact range Advantages of TORX Tools and Screws: The transmission of torque depends on the crosssection and the hardness only there is no limitation of the transmission of torque due to the drive profile (e.g. 6-point profile). When tightening the screw, the force is transmitted between surfaces reducing considerably the deformation of the drive profile (notch effect): this reduces the wear of the tool and provides a longer service life. The heads of TORX screws can be kept smaller than those of conventional screws, as the out effect. This provides space-saving solutions particularly in areas with restricted access. The TORX profile ensures that the tool is always introduced vertically into the screw and prevents the cam-out effect. h the trademark of the o. Acument Intellectual Properties LL. is licensee for the manufacture of TORX tools omponents and Spare Parts see pages 20 to

38 h Screw Driving Tool Set e j drive 6.3 = 1, 10 = 3 and 12.5 = 1 2 For outside TORX screws In plastic case With PUR foam insert 9 pieces 850-E E 5 E E 8 E 10 E E 1 E 18 E N TORX Tools h Screw Driving Tool Set NOe For inside and outside TORX screws In plastic case With PUR foam insert 29 pieces 609-E 6 x E 8 E 10 x E 12 E1xE18 E20xE2 850-E 5 E 6 E E E 10 E 12 E E 10 E 12 E T 55 T T 10 T 20 T 25 T 2 T T 30 H 2223 Lg-T T 0 T 5 T N h Screw Driving Tool Set For inside and outside TORX screws In plastic case With PUR foam insert 58 pieces 609-E 6 x E 8 E 10 x E 12 E1xE18 E20xE2 NOe 803-T 6 T T 8 T 9 T 10 T 15 T 20 T 25 T 2 T E E 5 E 6 E E E 10 E 11 E 12 E T 0 T E 16 E 18 E 20 E T 50 T 55 T T 6 T T 8 T 9 T 10 T 15 T 20 T 25 T 2 T 30 T T T H T 8 H T 9 H T 10 H T 15 H T20H T25H T2H T30H T0H 2223 Lg-T hselector Ne j drive 6.3 = 1, 10 = 3 and 12.5 = 1 2 For inside TORX screws 10 pieces 8502-T 8 T 10 T T 20 T 25 T T 0 T 50 T 55 T Ne With its, 2 pieces each For inside TORX screws In plastic case With PUR foam insert 32 pieces T 6 T T 8 T 9 T 10 T 15 T 20 T 25 T 2 T 30 à T 0 T 5 T 50 T 55 à NOe For measuring the sizes of inside and outside TORX screws, even in areas with restricted access With bore hole, therefore also suitable for tamper resistant TORX screws (inside TORX screws with centre pin) 12 parts sizes T 10 up to T 60 and E 6 up to E TS omparison Hexagon Profile high notch fatigue linear contact For inside and outside TORX screws In plastic case With PUR foam insert 21 pieces 880-E 5 E 6 E E 8 E 10 E 11 E 12 E T 15 T 20 T 25 T 2 T 30 T 0 T 5 T P HAZET TORX narrow wrench impact range no notch fatigue low surface pressure contact area wide wrench impact range 116 omponents and Spare Parts see pages 20 to 29